lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-Id: <1247774290-4194-4-git-send-email-mjg@redhat.com>
Date:	Thu, 16 Jul 2009 20:58:10 +0100
From:	Matthew Garrett <mjg@...hat.com>
To:	linux-kernel@...r.kernel.org
Cc:	linux-ide@...r.kernel.org, Matthew Garrett <mjg@...hat.com>
Subject: [PATCH 3/3] libata: Allow AHCI to flag ports as non-hotpluggable

Some SATA ports are fully internal and unlikely to be hotplugged. The
AHCI spec allows vendors to flag these ports differently, allowing
hotplug bays and eSATA ports to be treated differently. Flag ports with
this information so userspace policy decisions can be made.

Signed-off-by: Matthew Garrett <mjg@...hat.com>
---
 drivers/ata/ahci.c |   15 +++++++++++++++
 1 files changed, 15 insertions(+), 0 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 4863da9..eda8a11 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -77,6 +77,7 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
 			      size_t size);
 static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
 					ssize_t size);
+static int ahci_is_hotplug_capable(struct ata_port *ap);
 
 enum {
 	AHCI_PCI_BAR		= 5,
@@ -193,6 +194,8 @@ enum {
 	PORT_CMD_ASP		= (1 << 27), /* Aggressive Slumber/Partial */
 	PORT_CMD_ALPE		= (1 << 26), /* Aggressive Link PM enable */
 	PORT_CMD_ATAPI		= (1 << 24), /* Device is ATAPI */
+	PORT_CMD_ESP		= (1 << 21), /* port is esata capable */
+	PORT_CMD_HPCP           = (1 << 18), /* port is hot plug capable */
 	PORT_CMD_PMP		= (1 << 17), /* PMP attached */
 	PORT_CMD_LIST_ON	= (1 << 15), /* cmd list DMA engine running */
 	PORT_CMD_FIS_ON		= (1 << 14), /* FIS DMA engine running */
@@ -877,6 +880,15 @@ static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
 	return -EINVAL;
 }
 
+static int ahci_is_hotplug_capable(struct ata_port *ap)
+{
+	void __iomem *port_mmio = ahci_port_base(ap);
+	u8 cmd;
+
+	cmd = readl(port_mmio + PORT_CMD);
+	return cmd & (PORT_CMD_HPCP | PORT_CMD_ESP);
+}
+
 static void ahci_start_engine(struct ata_port *ap)
 {
 	void __iomem *port_mmio = ahci_port_base(ap);
@@ -2378,6 +2390,9 @@ static int ahci_port_start(struct ata_port *ap)
 	if (!pp)
 		return -ENOMEM;
 
+	if (!ahci_is_hotplug_capable(ap))
+		ap->flags |= ATA_FLAG_NO_SATA_HOTPLUG;
+
 	mem = dmam_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma,
 				  GFP_KERNEL);
 	if (!mem)
-- 
1.6.2.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ