Linux version 2.6.30.1 (root@wixor-laptop) (gcc version 4.3.3 (Debian 4.3.3-7) ) #10 Sat Jul 18 16:27:39 CEST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002fe90000 (usable) BIOS-e820: 000000002fe90000 - 000000002fe9f000 (ACPI data) BIOS-e820: 000000002fe9f000 - 000000002ff00000 (ACPI NVS) BIOS-e820: 000000002ff00000 - 0000000040000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) DMI present. last_pfn = 0x2fe90 max_arch_pfn = 0x1000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-DFFFF uncachable E0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask FC0000000 write-back 1 base 02FF00000 mask FFFF00000 uncachable 2 base 030000000 mask FF0000000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled PAT not supported by CPU. original variable MTRRs reg 0, base: 0GB, range: 1GB, type WB reg 1, base: 767MB, range: 1MB, type UC reg 2, base: 768MB, range: 256MB, type UC total RAM coverred: 767M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 2M num_reg: 3 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 512MB, type WB reg 1, base: 512MB, range: 256MB, type WB reg 2, base: 767MB, range: 1MB, type UC e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) Scanning 1 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000001000 (usable) modified: 0000000000001000 - 0000000000010000 (reserved) modified: 0000000000010000 - 000000000009dc00 (usable) modified: 000000000009dc00 - 00000000000a0000 (reserved) modified: 00000000000e0000 - 0000000000100000 (reserved) modified: 0000000000100000 - 000000002fe90000 (usable) modified: 000000002fe90000 - 000000002fe9f000 (ACPI data) modified: 000000002fe9f000 - 000000002ff00000 (ACPI NVS) modified: 000000002ff00000 - 0000000040000000 (reserved) modified: 00000000fec00000 - 00000000fec10000 (reserved) modified: 00000000fee00000 - 00000000fee01000 (reserved) modified: 00000000fff00000 - 0000000100000000 (reserved) init_memory_mapping: 0000000000000000-000000002fe90000 NX (Execute Disable) protection: active 0000000000 - 0000200000 page 4k 0000200000 - 002fe00000 page 2M 002fe00000 - 002fe90000 page 4k kernel direct mapping tables up to 2fe90000 @ 10000-16000 ACPI: RSDP 000f73b0 00014 (v00 PTLTD ) ACPI: RSDT 2fe991b9 0003C (v01 FSC PC 06040000 LTP 00000000) ACPI: FACP 2fe9ed7e 00074 (v01 VN896 PTLTW 06040000 PTL_ 000F4240) ACPI: Override [DSDT-LM10W ], this is unsafe: tainting kernel Disabling lock debugging due to kernel taint ACPI: DSDT @ 0x2fe998fe Table override, replaced with: ACPI: DSDT c040a5a4 049CA (v01 FIC LM10W 06040000 INTL 20061109) ACPI: FACS 2fe9ffc0 00040 ACPI: APIC 2fe9edf2 0005C (v01 PTLTD APIC 06040000 LTP 00000000) ACPI: MCFG 2fe9ee4e 0003C (v01 PTLTD MCFG 06040000 LTP 00000000) ACPI: SLIC 2fe9ee8a 00176 (v01 FSC PC 06040000 00000000) ACPI: SSDT 2fe9970e 001F0 (v01 PmRef Cpu0Cst 00003001 INTL 20050228) ACPI: SSDT 2fe991f5 00519 (v01 PmRef CpuPm 00003000 INTL 20050228) ACPI: Local APIC address 0xfee00000 766MB LOWMEM available. mapped low ram: 0 - 2fe90000 low ram: 0 - 2fe90000 node 0 low ram: 00000000 - 2fe90000 node 0 bootmap 00012000 - 00017fd4 (6 early reservations) ==> bootmem [0000000000 - 002fe90000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000100000 - 00004dc0b8] TEXT DATA BSS ==> [0000100000 - 00004dc0b8] #2 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] #3 [00004dd000 - 00004e2176] BRK ==> [00004dd000 - 00004e2176] #4 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] #5 [0000012000 - 0000018000] BOOTMAP ==> [0000012000 - 0000018000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x0002fe90 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x00000001 0: 0x00000010 -> 0x0000009d 0: 0x00000100 -> 0x0002fe90 On node 0 totalpages: 196126 free_area_init_node: node 0, pgdat c0419ce0, node_mem_map c1000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3950 pages, LIFO batch:0 Normal zone: 1502 pages used for memmap Normal zone: 190642 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24]) IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ9 used by override. ACPI: IRQ10 used by override. Enabling APIC mode: Flat. Using 2 I/O APICs Using ACPI (MADT) for SMP configuration information nr_irqs_gsi: 48 PM: Registered nosave memory: 0000000000001000 - 0000000000010000 PM: Registered nosave memory: 000000000009d000 - 000000000009e000 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194592 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.30.1 root=/dev/sda1 ro hpet=force lapic_timer_c2_ok 3 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 NR_IRQS:288 PID hash table entries: 4096 (order: 12, 16384 bytes) Fast TSC calibration using PIT Detected 1994.942 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 773392k/784960k available (2450k kernel code, 10948k reserved, 761k data, 288k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffaa000 - 0xfffff000 ( 340 kB) vmalloc : 0xf0690000 - 0xfffa8000 ( 249 MB) lowmem : 0xc0000000 - 0xefe90000 ( 766 MB) .init : 0xc0426000 - 0xc046e000 ( 288 kB) .data : 0xc0364988 - 0xc0422e18 ( 761 kB) .text : 0xc0100000 - 0xc0364988 (2450 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.88 BogoMIPS (lpj=19949420) Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. CPU: Intel(R) Celeron(R) M CPU 450 @ 2.00GHz stepping 0c Checking 'hlt' instruction... OK. ACPI: Core revision 20090320 ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found apic 0 pin 0) ... ....... works. net_namespace: 524 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: BIOS BUG #81[00000000] found PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG for extended config space ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio: [0xc0000000-0xc7ffffff] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:0f.0: reg 10 io port: [0x60a8-0x60af] pci 0000:00:0f.0: reg 14 io port: [0x60a0-0x60a3] pci 0000:00:0f.0: reg 18 io port: [0x6008-0x600f] pci 0000:00:0f.0: reg 1c io port: [0x6004-0x6007] pci 0000:00:0f.0: reg 20 io port: [0x6010-0x601f] pci 0000:00:0f.0: reg 24 io port: [0x6400-0x64ff] pci 0000:00:10.0: reg 20 io port: [0x6020-0x603f] pci 0000:00:10.0: supports D1 D2 pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.0: PME# disabled pci 0000:00:10.1: reg 20 io port: [0x6040-0x605f] pci 0000:00:10.1: supports D1 D2 pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.1: PME# disabled pci 0000:00:10.2: reg 20 io port: [0x6060-0x607f] pci 0000:00:10.2: supports D1 D2 pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.2: PME# disabled pci 0000:00:10.3: reg 20 io port: [0x6080-0x609f] pci 0000:00:10.3: supports D1 D2 pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.3: PME# disabled pci 0000:00:10.4: reg 10 32bit mmio: [0xc9400000-0xc94000ff] pci 0000:00:10.4: supports D1 D2 pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.4: PME# disabled pci 0000:00:11.0: Force enabled HPET at 0xfed00000 pci 0000:00:12.0: reg 10 io port: [0x6800-0x68ff] pci 0000:00:12.0: reg 14 32bit mmio: [0xc9400400-0xc94004ff] pci 0000:00:12.0: supports D1 D2 pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:12.0: PME# disabled pci 0000:01:00.0: reg 10 32bit mmio: [0xa0000000-0xbfffffff] pci 0000:01:00.0: reg 14 32bit mmio: [0xc8000000-0xc8ffffff] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] pci 0000:01:00.0: supports D1 D2 pci 0000:00:01.0: bridge 32bit mmio: [0xc8000000-0xc8ffffff] pci 0000:00:01.0: bridge 32bit mmio pref: [0xa0000000-0xbfffffff] pci 0000:00:03.0: bridge io port: [0x7000-0x7fff] pci 0000:00:03.0: bridge 32bit mmio: [0xc9000000-0xc90fffff] pci 0000:04:01.0: reg 10 64bit mmio: [0xc9100000-0xc9103fff] pci 0000:04:01.0: PME# supported from D0 D3hot D3cold pci 0000:04:01.0: PME# disabled pci 0000:00:13.0: bridge 32bit mmio: [0xc9100000-0xc91fffff] pci 0000:05:01.0: reg 10 32bit mmio: [0xc9000000-0xc900ffff] pci 0000:00:13.1: transparent bridge pci 0000:00:13.1: bridge 32bit mmio: [0xc9000000-0xc90fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGC._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE0C._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SP2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE._PRT] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled. ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *10, disabled. ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *11, disabled. ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *3, disabled. ACPI: PCI Interrupt Link [LNKA] (IRQs *9 10 11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 9 *10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 9 10 11 12) *3 SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing pci 0000:00:13.1: BAR 8: can't allocate resource pci 0000:05:01.0: BAR 0: can't allocate resource hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 32-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xe0000000-0xefffffff has been reserved system 00:01: iomem range 0xf0012000-0xf0012fff has been reserved system 00:01: iomem range 0xf0013000-0xf0013fff has been reserved system 00:06: iomem range 0x0-0x9ffff could not be reserved system 00:06: iomem range 0xc0000-0xcffff could not be reserved system 00:06: iomem range 0xe0000-0xfffff could not be reserved system 00:06: iomem range 0xe0000000-0xe01010ff has been reserved system 00:06: iomem range 0xe00100ff-0xe00190fe has been reserved system 00:06: iomem range 0xe00700ff-0xe007a0fe has been reserved system 00:06: iomem range 0xe00800ff-0xe00a00fe has been reserved system 00:06: iomem range 0xe01000ff-0xe06000fe could not be reserved system 00:06: iomem range 0xf00120ff-0xf00140fe could not be reserved system 00:06: iomem range 0xffb80000-0xffc7ffff has been reserved system 00:06: iomem range 0xfff00000-0xffffffff has been reserved system 00:06: iomem range 0xffee0000-0xffefffff has been reserved system 00:06: iomem range 0xfec00000-0xfec0ffff has been reserved system 00:06: iomem range 0xfee00000-0xfee0ffff could not be reserved system 00:07: ioport range 0x4d0-0x4d1 has been reserved system 00:07: ioport range 0xfe10-0xfe11 has been reserved system 00:07: ioport range 0xfe00-0xfe00 has been reserved system 00:07: ioport range 0x4000-0x407f has been reserved system 00:07: ioport range 0x4100-0x411f has been reserved pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xc0000000-0xbfffffff] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xc8000000-0xc8ffffff pci 0000:00:01.0: PREFETCH window: 0x000000a0000000-0x000000bfffffff pci 0000:00:02.0: PCI bridge, secondary bus 0000:02 pci 0000:00:02.0: IO window: disabled pci 0000:00:02.0: MEM window: disabled pci 0000:00:02.0: PREFETCH window: disabled pci 0000:00:03.0: PCI bridge, secondary bus 0000:03 pci 0000:00:03.0: IO window: 0x7000-0x7fff pci 0000:00:03.0: MEM window: 0xc9000000-0xc90fffff pci 0000:00:03.0: PREFETCH window: disabled pci 0000:00:13.0: PCI bridge, secondary bus 0000:04 pci 0000:00:13.0: IO window: disabled pci 0000:00:13.0: MEM window: 0xc9100000-0xc91fffff pci 0000:00:13.0: PREFETCH window: disabled pci 0000:00:13.1: PCI bridge, secondary bus 0000:05 pci 0000:00:13.1: IO window: disabled pci 0000:00:13.1: MEM window: 0x50000000-0x500fffff pci 0000:00:13.1: PREFETCH window: disabled pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27 pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:03.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 pci 0000:00:03.0: setting latency timer to 64 pci 0000:00:13.0: setting latency timer to 64 pci 0000:00:13.1: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 1 mem: [0xc8000000-0xc8ffffff] pci_bus 0000:01: resource 2 pref mem [0xa0000000-0xbfffffff] pci_bus 0000:03: resource 0 io: [0x7000-0x7fff] pci_bus 0000:03: resource 1 mem: [0xc9000000-0xc90fffff] pci_bus 0000:04: resource 1 mem: [0xc9100000-0xc91fffff] pci_bus 0000:05: resource 1 mem: [0x50000000-0x500fffff] pci_bus 0000:05: resource 3 io: [0x00-0xffff] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered cpu0(1) debug files 109 Scanning for low memory corruption every 60 seconds msgmni has been set to 1510 io scheduler noop registered io scheduler anticipatory registered (default) pci 0000:00:00.0: MSI quirk detected; MSI disabled pci 0000:00:01.0: disabling DAC on VIA PCI bridge Switched to high resolution mode on CPU 0 pci 0000:00:10.4: EHCI: BIOS handoff failed (BIOS bug?) 01010001 pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:02.0: setting latency timer to 64 pcieport-driver 0000:00:03.0: setting latency timer to 64 aer 0000:00:02.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support Driver 'sd' needs updating - please use bus_type methods sata_via 0000:00:0f.0: version 2.4 sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21 sata_via 0000:00:0f.0: routed to hard irq line 10 sata_via 0000:00:0f.0: setting latency timer to 64 scsi0 : sata_via scsi1 : sata_via ata1: SATA max UDMA/133 cmd 0x60a8 ctl 0x60a0 bmdma 0x6010 irq 21 ata2: SATA max UDMA/133 cmd 0x6008 ctl 0x6004 bmdma 0x6018 irq 21 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered Using IPI Shortcut mode input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: ST980811AS, 3.ALE, max UDMA/133 ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST980811AS 3.AL PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) EXT4-fs: barriers enabled kjournald2 starting: pid 373, dev sda1:8, commit interval 5 seconds EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem sda1 with ordered data mode VFS: Mounted root (ext4 filesystem) readonly on device 8:1. Freeing unused kernel memory: 288k freed Write protecting the kernel text: 2452k Write protecting the kernel read-only data: 588k NET: Registered protocol family 1 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 ACPI: Power Button [PWRB] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 ACPI: Lid Switch [LID] ACPI: Battery Slot [BAT0] (battery present) ACPI: AC Adapter [ACAD] (on-line) rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs cfg80211: Calling CRDA to update world regulatory domain pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Marking TSC unstable due to TSC halts in idle ACPI: CPU0 (power states: C1[C1] C2[C2]) processor ACPI_CPU:00: registered as cooling_device0 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (57 C) acpi device:1d: registered as cooling_device1 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1a/device:1b/input/input4 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:10.4: setting latency timer to 64 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: irq 21, io mem 0xc9400000 input: PC Speaker as /devices/platform/pcspkr/input/input5 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected Linux agpgart interface v0.103 via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 eth0: VIA Rhine II at 0xc9400400, 00:14:0b:0f:ba:c3, IRQ 23. eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. agpgart: Detected VIA P4M900 chipset agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xc0000000 uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:10.0: setting latency timer to 64 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 20, io base 0x00006020 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:10.1: setting latency timer to 64 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 22, io base 0x00006040 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.2: setting latency timer to 64 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 21, io base 0x00006060 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:10.3: setting latency timer to 64 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:10.3: irq 23, io base 0x00006080 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ath5k 0000:05:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ath5k 0000:05:01.0: registered as 'phy0' input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input6 input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input7 HDA Intel 0000:04:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:04:01.0: setting latency timer to 64 HDA Intel 0000:04:01.0: PCI: Disallowing DAC for device fan PNP0C0B:00: registered as cooling_device2 ACPI: Fan [FAN] (on) usb 2-2: new full speed USB device using uhci_hcd and address 2 phy0: Selected rate control algorithm 'minstrel' ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45) usb 2-2: configuration #1 chosen from 1 choice Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: Generic Bluetooth USB driver ver 0.5 usbcore: registered new interface driver btusb Adding 1975984k swap on /dev/sda2. Priority:-1 extents:1 across:1975984k EXT4 FS on sda1, internal journal on sda1:8 loop: module loaded p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 decode_hpp: Could not get hotplug parameters. Use defaults acpiphp: Slot [1] registered fuse init (API version 7.11) Bluetooth: L2CAP ver 2.13 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered eth0: link down NET: Registered protocol family 17 wlan0: authenticate with AP 00:1e:2a:06:15:4a wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate wlan0: authenticated wlan0: associate with AP 00:1e:2a:06:15:4a wlan0: mismatch in privacy configuration and mixed-cell disabled - abort association wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate wlan0: authenticate with AP 00:1e:2a:06:15:4a wlan0: authenticated wlan0: associate with AP 00:1e:2a:06:15:4a wlan0: RX AssocResp from 00:1e:2a:06:15:4a (capab=0x431 status=0 aid=8) wlan0: associated