[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.30.1 (root@localhost) (gcc version 4.4.0 20090630 (prerelease) (GCC) ) #1 SMP Sat Jul 4 22:19:30 CEST 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7d90000 (usable) [ 0.000000] BIOS-e820: 00000000c7d90000 - 00000000c7d9e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000c7d9e000 - 00000000c7de0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000c7de0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0xc7d90 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 100000000 mask FE0000000 write-back [ 0.000000] 2 base 120000000 mask FF0000000 write-back [ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 5 base 0C7E00000 mask FFFE00000 uncachable [ 0.000000] 6 base 0C8000000 mask FF8000000 uncachable [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c7e00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000c7d90000 (usable) [ 0.000000] modified: 00000000c7d90000 - 00000000c7d9e000 (ACPI data) [ 0.000000] modified: 00000000c7d9e000 - 00000000c7de0000 (ACPI NVS) [ 0.000000] modified: 00000000c7de0000 - 00000000d0000000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 37fa0000 - 37fefc1e [ 0.000000] Allocated new RAMDISK: 00008000 - 00057c1e [ 0.000000] Move RAMDISK from 0000000037fa0000 - 0000000037fefc1d to 00008000 - 00057c1d [ 0.000000] ACPI: RSDP 000f9cd0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT c7d90000 00044 (v01 DELL AS09 20090511 MSFT 00000097) [ 0.000000] ACPI: FACP c7d90200 00084 (v01 051109 FACP1620 20090511 MSFT 00000097) [ 0.000000] ACPI: DSDT c7d905c0 05270 (v01 1ADXP 1ADXP005 00000005 INTL 20051117) [ 0.000000] ACPI: FACS c7d9e000 00040 [ 0.000000] ACPI: APIC c7d90390 0006C (v01 051109 APIC1620 20090511 MSFT 00000097) [ 0.000000] ACPI: MCFG c7d90400 0003C (v01 051109 OEMMCFG 20090511 MSFT 00000097) [ 0.000000] ACPI: SLIC c7d90440 00176 (v01 DELL AS09 20090511 MSFT 00000097) [ 0.000000] ACPI: OEMB c7d9e040 00072 (v01 051109 OEMB1620 20090511 MSFT 00000097) [ 0.000000] ACPI: HPET c7d985c0 00038 (v01 051109 OEMHPET 20090511 MSFT 00000097) [ 0.000000] ACPI: GSCI c7d9e0c0 02024 (v01 051109 GMCHSCI 20090511 MSFT 00000097) [ 0.000000] ACPI: SSDT c7da0b40 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2309MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00058000 - 0005ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0001000000 - 00016f1500] TEXT DATA BSS ==> [0001000000 - 00016f1500] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00016f2000 - 00016f90e0] BRK ==> [00016f2000 - 00016f90e0] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [0000008000 - 0000057c1e] NEW RAMDISK ==> [0000008000 - 0000057c1e] [ 0.000000] #8 [0000058000 - 000005f000] BOOTMAP ==> [0000058000 - 000005f000] [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000c7d90 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000c7d90 [ 0.000000] On node 0 totalpages: 818475 [ 0.000000] free_area_init_node: node 0, pgdat c15d6500, node_mem_map c16fa000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4620 pages used for memmap [ 0.000000] HighMem zone: 586630 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ee00000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 11 pages at c300a000, static data 23772 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 812079 [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/2bfe816c-08ba-4962-9cb7-f54396fba685 ro init 3 enable_mtrr_cleanup [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Experimental hierarchical RCU implementation. [ 0.000000] Experimental hierarchical RCU init done. [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2499.967 MHz processor. [ 0.000999] Console: colour VGA+ 80x25 [ 0.000999] console [tty0] enabled [ 0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000999] Initializing HighMem for node 0 (000377fe:000c7d90) [ 0.000999] Memory: 3238812k/3274304k available (3880k kernel code, 34196k reserved, 2157k data, 344k init, 2365000k highmem) [ 0.000999] virtual kernel memory layout: [ 0.000999] fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB) [ 0.000999] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000999] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000999] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000999] .init : 0xc15ed000 - 0xc1643000 ( 344 kB) [ 0.000999] .data : 0xc13ca3d9 - 0xc15e5b4c (2157 kB) [ 0.000999] .text : 0xc1000000 - 0xc13ca3d9 (3880 kB) [ 0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000999] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000999] hpet clockevent registered [ 0.000999] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4999.93 BogoMIPS (lpj=2499967) [ 0.000999] Security Framework initialized [ 0.000999] SELinux: Initializing. [ 0.000999] SELinux: Starting in permissive mode [ 0.000999] Mount-cache hash table entries: 512 [ 0.000999] Initializing cgroup subsys ns [ 0.000999] Initializing cgroup subsys cpuacct [ 0.000999] Initializing cgroup subsys freezer [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 2048K [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 0 [ 0.001008] Intel machine check architecture supported. [ 0.001077] Intel machine check reporting enabled on CPU#0. [ 0.001147] using mwait in idle threads. [ 0.001217] Checking 'hlt' instruction... OK. [ 0.005485] ACPI: Core revision 20090320 [ 0.013361] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.023711] CPU0: Intel Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 06 [ 0.023996] APIC calibration not consistent with PM-Timer: 119ms instead of 100ms [ 0.023996] APIC delta adjusted to PM-Timer: 1250043 (1500035) [ 0.023996] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.000999] Initializing CPU#1 [ 0.000999] Calibrating delay using timer specific routine.. 5000.03 BogoMIPS (lpj=2500015) [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 2048K [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 1 [ 0.000999] Intel machine check architecture supported. [ 0.000999] Intel machine check reporting enabled on CPU#1. [ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.095343] CPU1: Intel Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 06 [ 0.096138] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.097003] Brought up 2 CPUs [ 0.097987] Total of 2 processors activated (9999.96 BogoMIPS). [ 0.098130] khelper used greatest stack depth: 7048 bytes left [ 0.098130] net_namespace: 1028 bytes [ 0.098130] Time: 0:31:07 Date: 07/21/09 [ 0.098130] NET: Registered protocol family 16 [ 0.099008] ACPI: bus type pci registered [ 0.099080] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.099089] PCI: Not using MMCONFIG. [ 0.099289] PCI: Using configuration type 1 for base access [ 0.104154] bio: create slab at 0 [ 0.105516] ACPI: EC: Look up EC in DSDT [ 0.111422] ACPI: Interpreter enabled [ 0.111489] ACPI: (supports S0 S1 S3 S4 S5) [ 0.111665] ACPI: Using IOAPIC for interrupt routing [ 0.111778] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.113224] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.113298] PCI: Using MMCONFIG for extended config space [ 0.120522] ACPI: No dock devices found. [ 0.120771] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.120863] pci 0000:00:02.0: reg 10 64bit mmio: [0xfe400000-0xfe7fffff] [ 0.120863] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] [ 0.120863] pci 0000:00:02.0: reg 20 io port: [0xdc00-0xdc07] [ 0.120863] pci 0000:00:02.1: reg 10 64bit mmio: [0xfe800000-0xfe8fffff] [ 0.121056] pci 0000:00:1a.0: reg 20 io port: [0xd880-0xd89f] [ 0.121119] pci 0000:00:1a.1: reg 20 io port: [0xd800-0xd81f] [ 0.121180] pci 0000:00:1a.2: reg 20 io port: [0xd480-0xd49f] [ 0.121245] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe9fbc00-0xfe9fbfff] [ 0.121295] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.121368] pci 0000:00:1a.7: PME# disabled [ 0.121469] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe9f4000-0xfe9f7fff] [ 0.121506] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.121579] pci 0000:00:1b.0: PME# disabled [ 0.121695] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.121768] pci 0000:00:1c.0: PME# disabled [ 0.121884] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.121956] pci 0000:00:1c.2: PME# disabled [ 0.122034] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.122106] pci 0000:00:1c.5: PME# disabled [ 0.122218] pci 0000:00:1d.0: reg 20 io port: [0xd400-0xd41f] [ 0.122280] pci 0000:00:1d.1: reg 20 io port: [0xd080-0xd09f] [ 0.122342] pci 0000:00:1d.2: reg 20 io port: [0xd000-0xd01f] [ 0.122407] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe9fb800-0xfe9fbbff] [ 0.122457] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.122529] pci 0000:00:1d.7: PME# disabled [ 0.122703] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.122816] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO [ 0.122890] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) [ 0.123029] pci 0000:00:1f.2: reg 10 io port: [0xcc00-0xcc07] [ 0.123035] pci 0000:00:1f.2: reg 14 io port: [0xc880-0xc883] [ 0.123040] pci 0000:00:1f.2: reg 18 io port: [0xc800-0xc807] [ 0.123045] pci 0000:00:1f.2: reg 1c io port: [0xc480-0xc483] [ 0.123050] pci 0000:00:1f.2: reg 20 io port: [0xc400-0xc40f] [ 0.123055] pci 0000:00:1f.2: reg 24 io port: [0xc080-0xc08f] [ 0.123096] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe9fb400-0xfe9fb4ff] [ 0.123108] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.123146] pci 0000:00:1f.5: reg 10 io port: [0xbc00-0xbc07] [ 0.123152] pci 0000:00:1f.5: reg 14 io port: [0xb880-0xb883] [ 0.123157] pci 0000:00:1f.5: reg 18 io port: [0xb800-0xb807] [ 0.123162] pci 0000:00:1f.5: reg 1c io port: [0xb480-0xb483] [ 0.123167] pci 0000:00:1f.5: reg 20 io port: [0xb400-0xb40f] [ 0.123172] pci 0000:00:1f.5: reg 24 io port: [0xb080-0xb08f] [ 0.123283] pci 0000:02:00.0: reg 10 32bit mmio: [0xfeaff800-0xfeafffff] [ 0.123294] pci 0000:02:00.0: reg 14 32bit mmio: [0xfeaff400-0xfeaff47f] [ 0.123320] pci 0000:02:00.0: reg 20 32bit mmio: [0xfeaff000-0xfeaff07f] [ 0.123330] pci 0000:02:00.0: reg 24 32bit mmio: [0xfeafec00-0xfeafec7f] [ 0.123421] pci 0000:00:1c.2: bridge 32bit mmio: [0xfea00000-0xfeafffff] [ 0.123467] pci 0000:03:00.0: reg 10 io port: [0xe800-0xe8ff] [ 0.123486] pci 0000:03:00.0: reg 18 64bit mmio: [0xfebff000-0xfebfffff] [ 0.123499] pci 0000:03:00.0: reg 20 64bit mmio: [0xfdff0000-0xfdffffff] [ 0.123506] pci 0000:03:00.0: reg 30 32bit mmio: [0xfebc0000-0xfebdffff] [ 0.123543] pci 0000:03:00.0: supports D1 D2 [ 0.123544] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.123619] pci 0000:03:00.0: PME# disabled [ 0.123731] pci 0000:00:1c.5: bridge io port: [0xe000-0xefff] [ 0.123735] pci 0000:00:1c.5: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.123740] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff] [ 0.123783] pci 0000:00:1e.0: transparent bridge [ 0.123871] pci_bus 0000:00: on NUMA node 0 [ 0.123876] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.124063] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.124127] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.124177] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 0.124224] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.140107] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15) [ 0.140442] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 0.141024] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.141405] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15) [ 0.141786] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 6 7 10 11 12 14 15) [ 0.142153] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15) [ 0.142534] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15) [ 0.142916] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15) [ 0.143254] SCSI subsystem initialized [ 0.143254] libata version 3.00 loaded. [ 0.143254] usbcore: registered new interface driver usbfs [ 0.143254] usbcore: registered new interface driver hub [ 0.143254] usbcore: registered new device driver usb [ 0.143996] PCI: Using ACPI for IRQ routing [ 0.146987] NetLabel: Initializing [ 0.147059] NetLabel: domain hash size = 128 [ 0.147134] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.147209] NetLabel: unlabeled traffic allowed by default [ 0.147285] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.147285] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.154988] pnp: PnP ACPI init [ 0.155068] ACPI: bus type pnp registered [ 0.157087] pnp: PnP ACPI: found 12 devices [ 0.157154] ACPI: ACPI bus type pnp unregistered [ 0.157229] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.157303] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved [ 0.157381] system 00:06: ioport range 0xa00-0xadf has been reserved [ 0.157455] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.157527] system 00:07: ioport range 0x800-0x87f has been reserved [ 0.157599] system 00:07: ioport range 0x500-0x57f could not be reserved [ 0.157672] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.157747] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.157822] system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved [ 0.157898] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.157973] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.158053] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved [ 0.158130] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 0.158204] system 00:0b: iomem range 0xc0000-0xcffff could not be reserved [ 0.158277] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved [ 0.158351] system 00:0b: iomem range 0x100000-0xc7dfffff could not be reserved [ 0.158463] system 00:0b: iomem range 0xfed90000-0xffffffff could not be reserved [ 0.193506] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 [ 0.193576] pci 0000:00:1c.0: IO window: disabled [ 0.193647] pci 0000:00:1c.0: MEM window: disabled [ 0.193716] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.193789] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02 [ 0.193859] pci 0000:00:1c.2: IO window: disabled [ 0.193930] pci 0000:00:1c.2: MEM window: 0xfea00000-0xfeafffff [ 0.194005] pci 0000:00:1c.2: PREFETCH window: disabled [ 0.194078] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:03 [ 0.194150] pci 0000:00:1c.5: IO window: 0xe000-0xefff [ 0.194221] pci 0000:00:1c.5: MEM window: 0xfeb00000-0xfebfffff [ 0.194293] pci 0000:00:1c.5: PREFETCH window: 0x000000fdf00000-0x000000fdffffff [ 0.194408] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 [ 0.194477] pci 0000:00:1e.0: IO window: disabled [ 0.194547] pci 0000:00:1e.0: MEM window: disabled [ 0.194617] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.194696] alloc irq_desc for 17 on cpu 0 node 0 [ 0.194697] alloc kstat_irqs on cpu 0 node 0 [ 0.194701] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.194777] pci 0000:00:1c.0: setting latency timer to 64 [ 0.194783] alloc irq_desc for 18 on cpu 0 node 0 [ 0.194784] alloc kstat_irqs on cpu 0 node 0 [ 0.194787] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.194860] pci 0000:00:1c.2: setting latency timer to 64 [ 0.194866] alloc irq_desc for 16 on cpu 0 node 0 [ 0.194867] alloc kstat_irqs on cpu 0 node 0 [ 0.194870] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.194944] pci 0000:00:1c.5: setting latency timer to 64 [ 0.194949] pci 0000:00:1e.0: setting latency timer to 64 [ 0.194952] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.194954] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.194957] pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff] [ 0.194959] pci_bus 0000:03: resource 0 io: [0xe000-0xefff] [ 0.194961] pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff] [ 0.194963] pci_bus 0000:03: resource 2 pref mem [0xfdf00000-0xfdffffff] [ 0.194965] pci_bus 0000:04: resource 3 io: [0x00-0xffff] [ 0.194967] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff] [ 0.194992] NET: Registered protocol family 2 [ 0.204061] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.204338] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.204818] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.205092] TCP: Hash tables configured (established 131072 bind 65536) [ 0.205164] TCP reno registered [ 0.207094] NET: Registered protocol family 1 [ 0.207213] Trying to unpack rootfs image as initramfs... [ 0.215429] Freeing initrd memory: 319k freed [ 0.215975] Machine check exception polling timer started. [ 0.216456] Microcode Update Driver: v2.00 , Peter Oruba [ 0.216568] Scanning for low memory corruption every 60 seconds [ 0.216884] audit: initializing netlink socket (disabled) [ 0.216965] type=2000 audit(1248136266.216:1): initialized [ 0.226911] highmem bounce pool size: 64 pages [ 0.226981] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.229215] VFS: Disk quotas dquot_6.5.2 [ 0.229346] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.230311] msgmni has been set to 1709 [ 0.230463] SELinux: Registering netfilter hooks [ 0.230739] alg: No test for stdrng (krng) [ 0.230889] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.231007] io scheduler noop registered [ 0.231072] io scheduler anticipatory registered [ 0.231139] io scheduler deadline registered [ 0.231256] io scheduler cfq registered (default) [ 0.231333] pci 0000:00:02.0: Boot video device [ 0.231339] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f30 [ 0.231341] pci 0000:00:1a.0: Performing full reset [ 0.231356] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.231358] pci 0000:00:1a.1: Performing full reset [ 0.231372] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.231373] pci 0000:00:1a.2: Performing full reset [ 0.231406] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f30 [ 0.231407] pci 0000:00:1d.0: Performing full reset [ 0.231421] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.231423] pci 0000:00:1d.1: Performing full reset [ 0.231436] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.231438] pci 0000:00:1d.2: Performing full reset [ 0.231579] alloc irq_desc for 24 on cpu 0 node 0 [ 0.231580] alloc kstat_irqs on cpu 0 node 0 [ 0.231589] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.231601] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.231758] alloc irq_desc for 25 on cpu 0 node 0 [ 0.231760] alloc kstat_irqs on cpu 0 node 0 [ 0.231766] pcieport-driver 0000:00:1c.2: irq 25 for MSI/MSI-X [ 0.231777] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 0.231930] alloc irq_desc for 26 on cpu 0 node 0 [ 0.231932] alloc kstat_irqs on cpu 0 node 0 [ 0.231937] pcieport-driver 0000:00:1c.5: irq 26 for MSI/MSI-X [ 0.231948] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 0.232145] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.232438] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.232548] ACPI: Power Button [PWRF] [ 0.232683] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.232795] ACPI: Power Button [PWRB] [ 0.233271] ACPI: SSDT c7da00f0 00277 (v01 DpgPmm P001Ist 00000011 INTL 20051117) [ 0.233666] ACPI: SSDT c7da05f0 004B2 (v01 PmRef P001Cst 00003001 INTL 20051117) [ 0.234063] Monitor-Mwait will be used to enter C-1 state [ 0.234082] Monitor-Mwait will be used to enter C-2 state [ 0.234089] Marking TSC unstable due to TSC halts in idle [ 0.234174] Switched to high resolution mode on CPU 0 [ 0.234204] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 0.234366] processor ACPI_CPU:00: registered as cooling_device0 [ 0.234714] ACPI: SSDT c7da0370 00277 (v01 DpgPmm P002Ist 00000012 INTL 20051117) [ 0.234956] Switched to high resolution mode on CPU 1 [ 0.235107] ACPI: SSDT c7da0ab0 00085 (v01 PmRef P002Cst 00003000 INTL 20051117) [ 0.235589] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 0.235748] processor ACPI_CPU:01: registered as cooling_device1 [ 0.240240] Non-volatile memory driver v1.3 [ 0.240387] Linux agpgart interface v0.103 [ 0.240503] agpgart-intel 0000:00:00.0: Intel G45/G43 Chipset [ 0.241255] agpgart-intel 0000:00:00.0: detected 131068K stolen memory [ 0.243252] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.243414] [drm] Initialized drm 1.1.0 20060810 [ 0.243532] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.243605] pci 0000:00:02.0: setting latency timer to 64 [ 0.244697] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 0.244815] [drm] MTRR allocation failed. Graphics performance may suffer. [ 0.244902] alloc irq_desc for 27 on cpu 0 node 0 [ 0.244904] alloc kstat_irqs on cpu 0 node 0 [ 0.244912] pci 0000:00:02.0: irq 27 for MSI/MSI-X [ 0.244926] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 0.245021] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.247023] brd: module loaded [ 0.247757] loop: module loaded [ 0.247918] Driver 'sd' needs updating - please use bus_type methods [ 0.248058] Driver 'sr' needs updating - please use bus_type methods [ 0.248255] ata_piix 0000:00:1f.2: version 2.13 [ 0.248271] alloc irq_desc for 19 on cpu 0 node 0 [ 0.248272] alloc kstat_irqs on cpu 0 node 0 [ 0.248277] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.248352] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.248547] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.248598] scsi0 : ata_piix [ 0.248790] scsi1 : ata_piix [ 0.250099] ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19 [ 0.250179] ata2: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19 [ 0.250268] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.250354] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.250541] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.250587] scsi2 : ata_piix [ 0.250734] scsi3 : ata_piix [ 0.251761] ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 19 [ 0.252547] ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 19 [ 0.252813] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI [ 0.252885] Copyright (c) 1999-2006 Intel Corporation. [ 0.252990] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4 [ 0.253068] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 0.253178] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.253249] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.253392] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.253470] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.253553] r8169 0000:03:00.0: setting latency timer to 64 [ 0.253615] alloc irq_desc for 28 on cpu 0 node 0 [ 0.253617] alloc kstat_irqs on cpu 0 node 0 [ 0.253627] r8169 0000:03:00.0: irq 28 for MSI/MSI-X [ 0.253839] eth0: RTL8168c/8111c at 0xf8056000, 00:21:70:4c:c3:ac, XID 3c4000c0 IRQ 28 [ 0.256738] console [netcon0] enabled [ 0.256802] netconsole: network logging started [ 0.256997] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.257075] ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96 [ 0.257090] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.257174] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.257177] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.257293] drivers/usb/core/inode.c: creating file 'devices' [ 0.257296] drivers/usb/core/inode.c: creating file '001' [ 0.257340] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.257456] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 0.257460] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr [ 0.257476] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.261353] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.261423] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.261425] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 0.261435] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe9fbc00 [ 0.261507] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.265375] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 0.272012] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.272126] usb usb1: default language 0x0409 [ 0.272139] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.272212] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.272321] usb usb1: Product: EHCI Host Controller [ 0.272390] usb usb1: Manufacturer: Linux 2.6.30.1 ehci_hcd [ 0.272459] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.272552] usb usb1: uevent [ 0.272587] usb usb1: usb_probe_device [ 0.272589] usb usb1: configuration #1 chosen from 1 choice [ 0.272662] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 0.272673] usb 1-0:1.0: uevent [ 0.272706] hub 1-0:1.0: usb_probe_interface [ 0.272707] hub 1-0:1.0: usb_probe_interface - got id [ 0.272709] hub 1-0:1.0: USB hub found [ 0.272778] hub 1-0:1.0: 6 ports detected [ 0.272843] hub 1-0:1.0: standalone hub [ 0.272844] hub 1-0:1.0: no power switching (usb 1.0) [ 0.272846] hub 1-0:1.0: individual port over-current protection [ 0.272848] hub 1-0:1.0: power on to power good time: 20ms [ 0.272851] hub 1-0:1.0: local power source is good [ 0.272853] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 0.272943] drivers/usb/core/inode.c: creating file '001' [ 0.272998] alloc irq_desc for 23 on cpu 0 node 0 [ 0.273000] alloc kstat_irqs on cpu 0 node 0 [ 0.273008] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.273088] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.273091] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.273198] drivers/usb/core/inode.c: creating file '002' [ 0.273244] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.273357] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 0.273361] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr [ 0.273372] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.277251] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.277321] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.277323] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 0.277332] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9fb800 [ 0.277404] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.281275] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 0.287013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.287111] usb usb2: default language 0x0409 [ 0.287122] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.287205] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.287316] usb usb2: Product: EHCI Host Controller [ 0.287384] usb usb2: Manufacturer: Linux 2.6.30.1 ehci_hcd [ 0.287454] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.287546] usb usb2: uevent [ 0.287579] usb usb2: usb_probe_device [ 0.287581] usb usb2: configuration #1 chosen from 1 choice [ 0.287654] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 0.287665] usb 2-0:1.0: uevent [ 0.287696] hub 2-0:1.0: usb_probe_interface [ 0.287697] hub 2-0:1.0: usb_probe_interface - got id [ 0.287699] hub 2-0:1.0: USB hub found [ 0.287767] hub 2-0:1.0: 6 ports detected [ 0.287833] hub 2-0:1.0: standalone hub [ 0.287834] hub 2-0:1.0: no power switching (usb 1.0) [ 0.287835] hub 2-0:1.0: individual port over-current protection [ 0.287837] hub 2-0:1.0: power on to power good time: 20ms [ 0.287840] hub 2-0:1.0: local power source is good [ 0.287842] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 0.287899] drivers/usb/core/inode.c: creating file '001' [ 0.287976] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.288054] ohci_hcd: block sizes: ed 64 td 64 [ 0.288089] uhci_hcd: USB Universal Host Controller Interface driver [ 0.288185] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.288261] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.288264] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.288373] drivers/usb/core/inode.c: creating file '003' [ 0.288414] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.288527] uhci_hcd 0000:00:1a.0: detected 2 ports [ 0.288598] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.288599] uhci_hcd 0000:00:1a.0: Performing full reset [ 0.288612] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 0.288621] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880 [ 0.288712] usb usb3: default language 0x0409 [ 0.288717] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.288790] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.288900] usb usb3: Product: UHCI Host Controller [ 0.288969] usb usb3: Manufacturer: Linux 2.6.30.1 uhci_hcd [ 0.289053] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.289145] usb usb3: uevent [ 0.289174] usb usb3: usb_probe_device [ 0.289176] usb usb3: configuration #1 chosen from 1 choice [ 0.289248] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 0.289259] usb 3-0:1.0: uevent [ 0.289288] hub 3-0:1.0: usb_probe_interface [ 0.289290] hub 3-0:1.0: usb_probe_interface - got id [ 0.289292] hub 3-0:1.0: USB hub found [ 0.289360] hub 3-0:1.0: 2 ports detected [ 0.289425] hub 3-0:1.0: standalone hub [ 0.289427] hub 3-0:1.0: no power switching (usb 1.0) [ 0.289428] hub 3-0:1.0: individual port over-current protection [ 0.289430] hub 3-0:1.0: power on to power good time: 2ms [ 0.289433] hub 3-0:1.0: local power source is good [ 0.289434] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 0.289480] drivers/usb/core/inode.c: creating file '001' [ 0.289537] alloc irq_desc for 21 on cpu 0 node 0 [ 0.289538] alloc kstat_irqs on cpu 0 node 0 [ 0.289541] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.289619] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.289621] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.289724] drivers/usb/core/inode.c: creating file '004' [ 0.289765] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.289878] uhci_hcd 0000:00:1a.1: detected 2 ports [ 0.289948] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.289950] uhci_hcd 0000:00:1a.1: Performing full reset [ 0.289962] uhci_hcd 0000:00:1a.1: supports USB remote wakeup [ 0.289971] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d800 [ 0.290068] usb usb4: default language 0x0409 [ 0.290073] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.290149] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.290259] usb usb4: Product: UHCI Host Controller [ 0.290327] usb usb4: Manufacturer: Linux 2.6.30.1 uhci_hcd [ 0.290398] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.290492] usb usb4: uevent [ 0.290521] usb usb4: usb_probe_device [ 0.290523] usb usb4: configuration #1 chosen from 1 choice [ 0.290596] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 0.290607] usb 4-0:1.0: uevent [ 0.290637] hub 4-0:1.0: usb_probe_interface [ 0.290639] hub 4-0:1.0: usb_probe_interface - got id [ 0.290640] hub 4-0:1.0: USB hub found [ 0.290708] hub 4-0:1.0: 2 ports detected [ 0.290774] hub 4-0:1.0: standalone hub [ 0.290775] hub 4-0:1.0: no power switching (usb 1.0) [ 0.290776] hub 4-0:1.0: individual port over-current protection [ 0.290778] hub 4-0:1.0: power on to power good time: 2ms [ 0.290781] hub 4-0:1.0: local power source is good [ 0.290782] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 0.290827] drivers/usb/core/inode.c: creating file '001' [ 0.290883] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21 [ 0.290960] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.290962] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.291071] drivers/usb/core/inode.c: creating file '005' [ 0.291119] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.291236] uhci_hcd 0000:00:1a.2: detected 2 ports [ 0.291306] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.291308] uhci_hcd 0000:00:1a.2: Performing full reset [ 0.291320] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 0.291324] uhci_hcd 0000:00:1a.2: irq 21, io base 0x0000d480 [ 0.291414] usb usb5: default language 0x0409 [ 0.291419] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.291492] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.291602] usb usb5: Product: UHCI Host Controller [ 0.291670] usb usb5: Manufacturer: Linux 2.6.30.1 uhci_hcd [ 0.291741] usb usb5: SerialNumber: 0000:00:1a.2 [ 0.291833] usb usb5: uevent [ 0.291863] usb usb5: usb_probe_device [ 0.291865] usb usb5: configuration #1 chosen from 1 choice [ 0.291938] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 0.291949] usb 5-0:1.0: uevent [ 0.291979] hub 5-0:1.0: usb_probe_interface [ 0.291980] hub 5-0:1.0: usb_probe_interface - got id [ 0.291982] hub 5-0:1.0: USB hub found [ 0.292057] hub 5-0:1.0: 2 ports detected [ 0.292123] hub 5-0:1.0: standalone hub [ 0.292124] hub 5-0:1.0: no power switching (usb 1.0) [ 0.292126] hub 5-0:1.0: individual port over-current protection [ 0.292127] hub 5-0:1.0: power on to power good time: 2ms [ 0.292130] hub 5-0:1.0: local power source is good [ 0.292132] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 0.292177] drivers/usb/core/inode.c: creating file '001' [ 0.292237] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.292313] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.292316] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.292420] drivers/usb/core/inode.c: creating file '006' [ 0.292461] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.292575] uhci_hcd 0000:00:1d.0: detected 2 ports [ 0.292644] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.292646] uhci_hcd 0000:00:1d.0: Performing full reset [ 0.292658] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 0.292662] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400 [ 0.292750] usb usb6: default language 0x0409 [ 0.292755] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.292829] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.292939] usb usb6: Product: UHCI Host Controller [ 0.293013] usb usb6: Manufacturer: Linux 2.6.30.1 uhci_hcd [ 0.293084] usb usb6: SerialNumber: 0000:00:1d.0 [ 0.293179] usb usb6: uevent [ 0.293209] usb usb6: usb_probe_device [ 0.293211] usb usb6: configuration #1 chosen from 1 choice [ 0.293283] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 0.293295] usb 6-0:1.0: uevent [ 0.293325] hub 6-0:1.0: usb_probe_interface [ 0.293326] hub 6-0:1.0: usb_probe_interface - got id [ 0.293328] hub 6-0:1.0: USB hub found [ 0.293396] hub 6-0:1.0: 2 ports detected [ 0.293462] hub 6-0:1.0: standalone hub [ 0.293463] hub 6-0:1.0: no power switching (usb 1.0) [ 0.293464] hub 6-0:1.0: individual port over-current protection [ 0.293466] hub 6-0:1.0: power on to power good time: 2ms [ 0.293469] hub 6-0:1.0: local power source is good [ 0.293470] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 0.293516] drivers/usb/core/inode.c: creating file '001' [ 0.293571] alloc irq_desc for 20 on cpu 0 node 0 [ 0.293573] alloc kstat_irqs on cpu 0 node 0 [ 0.293576] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 0.293652] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.293655] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.293756] drivers/usb/core/inode.c: creating file '007' [ 0.293797] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.293911] uhci_hcd 0000:00:1d.1: detected 2 ports [ 0.293980] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.293982] uhci_hcd 0000:00:1d.1: Performing full reset [ 0.293994] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 0.294009] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000d080 [ 0.294097] usb usb7: default language 0x0409 [ 0.294102] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.294178] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.294288] usb usb7: Product: UHCI Host Controller [ 0.294356] usb usb7: Manufacturer: Linux 2.6.30.1 uhci_hcd [ 0.294426] usb usb7: SerialNumber: 0000:00:1d.1 [ 0.294520] usb usb7: uevent [ 0.294550] usb usb7: usb_probe_device [ 0.294552] usb usb7: configuration #1 chosen from 1 choice [ 0.294624] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 0.294634] usb 7-0:1.0: uevent [ 0.294664] hub 7-0:1.0: usb_probe_interface [ 0.294665] hub 7-0:1.0: usb_probe_interface - got id [ 0.294667] hub 7-0:1.0: USB hub found [ 0.294734] hub 7-0:1.0: 2 ports detected [ 0.294800] hub 7-0:1.0: standalone hub [ 0.294801] hub 7-0:1.0: no power switching (usb 1.0) [ 0.294802] hub 7-0:1.0: individual port over-current protection [ 0.294804] hub 7-0:1.0: power on to power good time: 2ms [ 0.294807] hub 7-0:1.0: local power source is good [ 0.294808] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 0.294855] drivers/usb/core/inode.c: creating file '001' [ 0.294914] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.294990] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.294992] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.295107] drivers/usb/core/inode.c: creating file '008' [ 0.295166] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.295279] uhci_hcd 0000:00:1d.2: detected 2 ports [ 0.295349] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.295350] uhci_hcd 0000:00:1d.2: Performing full reset [ 0.295363] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 0.295367] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000 [ 0.295456] usb usb8: default language 0x0409 [ 0.295461] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.295534] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.295644] usb usb8: Product: UHCI Host Controller [ 0.295712] usb usb8: Manufacturer: Linux 2.6.30.1 uhci_hcd [ 0.295782] usb usb8: SerialNumber: 0000:00:1d.2 [ 0.295874] usb usb8: uevent [ 0.295910] usb usb8: usb_probe_device [ 0.295911] usb usb8: configuration #1 chosen from 1 choice [ 0.295984] usb usb8: adding 8-0:1.0 (config #1, interface 0) [ 0.295996] usb 8-0:1.0: uevent [ 0.296035] hub 8-0:1.0: usb_probe_interface [ 0.296036] hub 8-0:1.0: usb_probe_interface - got id [ 0.296038] hub 8-0:1.0: USB hub found [ 0.296107] hub 8-0:1.0: 2 ports detected [ 0.296176] hub 8-0:1.0: standalone hub [ 0.296177] hub 8-0:1.0: no power switching (usb 1.0) [ 0.296178] hub 8-0:1.0: individual port over-current protection [ 0.296180] hub 8-0:1.0: power on to power good time: 2ms [ 0.296183] hub 8-0:1.0: local power source is good [ 0.296185] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 0.296231] drivers/usb/core/inode.c: creating file '001' [ 0.296348] usbcore: registered new interface driver usblp [ 0.296418] Initializing USB Mass Storage driver... [ 0.296533] usbcore: registered new interface driver usb-storage [ 0.296604] USB Mass Storage support registered. [ 0.296718] usbcore: registered new interface driver libusual [ 0.296909] PNP: No PS/2 controller found. Probing ports directly. [ 0.299260] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.299336] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.299479] mice: PS/2 mouse device common for all mice [ 0.299726] rtc_cmos 00:03: RTC can wake from S4 [ 0.299842] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.299932] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.300046] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.300429] cpuidle: using governor ladder [ 0.300819] cpuidle: using governor menu [ 0.301687] usbcore: registered new interface driver hiddev [ 0.301789] usbcore: registered new interface driver usbhid [ 0.301859] usbhid: v2.6:USB HID core driver [ 0.301965] Advanced Linux Sound Architecture Driver Version 1.0.20. [ 0.302715] alloc irq_desc for 22 on cpu 0 node 0 [ 0.302717] alloc kstat_irqs on cpu 0 node 0 [ 0.302722] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.302860] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 0.337124] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 0.363159] ALSA device list: [ 0.363223] #0: HDA Intel at 0xfe9f4000 irq 22 [ 0.363332] Netfilter messages via NETLINK v0.30. [ 0.363417] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 0.363687] ctnetlink v0.93: registering with nfnetlink. [ 0.364255] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.364345] TCP cubic registered [ 0.364408] Initializing XFRM netlink socket [ 0.364730] NET: Registered protocol family 10 [ 0.365585] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 0.365699] IPv6 over IPv4 tunneling driver [ 0.366270] NET: Registered protocol family 17 [ 0.366504] RPC: Registered udp transport module. [ 0.366571] RPC: Registered tcp transport module. [ 0.367172] Using IPI No-Shortcut mode [ 0.367375] PM: Resume from disk failed. [ 0.367385] registered taskstats version 1 [ 0.367564] Magic number: 1:59:507 [ 0.372071] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 001403 POWER sig=k CSC CONNECT [ 0.372078] hub 1-0:1.0: port 5: status 0501 change 0001 [ 0.372089] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT [ 0.372094] hub 1-0:1.0: port 6: status 0501 change 0001 [ 0.387028] ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT [ 0.387034] hub 2-0:1.0: port 3: status 0501 change 0001 [ 0.389043] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.390046] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.392029] uhci_hcd 0000:00:1a.2: port 1 portsc 008a,00 [ 0.392044] uhci_hcd 0000:00:1a.2: port 2 portsc 008a,00 [ 0.393044] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.394042] uhci_hcd 0000:00:1d.1: port 1 portsc 0082,00 [ 0.396044] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.472040] hub 1-0:1.0: state 7 ports 6 chg 0060 evt 0000 [ 0.472050] hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s [ 0.472060] ehci_hcd 0000:00:1a.7: port 5 low speed --> companion [ 0.523026] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC [ 0.523049] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s [ 0.523056] ehci_hcd 0000:00:1a.7: port 6 low speed --> companion [ 0.567809] ata3: SATA link down (SStatus 0 SControl 300) [ 0.574032] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC [ 0.574051] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040 [ 0.574060] hub 2-0:1.0: state 7 ports 6 chg 0008 evt 0000 [ 0.574067] hub 2-0:1.0: port 3, status 0501, change 0000, 480 Mb/s [ 0.625301] ehci_hcd 0000:00:1d.7: port 3 high speed [ 0.625304] ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT [ 0.676028] usb 2-3: new high speed USB device using ehci_hcd and address 2 [ 1.022083] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.022186] ata1.01: SATA link down (SStatus 0 SControl 300) [ 1.052661] ata1.00: ATA-8: ST3320613AS, DE13, max UDMA/133 [ 1.052744] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.101624] ata1.00: configured for UDMA/133 [ 1.101793] scsi 0:0:0:0: Direct-Access ATA ST3320613AS DE13 PQ: 0 ANSI: 5 [ 1.102138] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.102143] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 1.102154] sd 0:0:0:0: [sda] Write Protect is off [ 1.102156] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.102171] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.102242] sda: sda1 sda2 sda3 sda4 [ 1.168805] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.237300] ehci_hcd 0000:00:1d.7: port 3 high speed [ 1.237304] ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT [ 1.361696] usb 2-3: default language 0x0409 [ 1.367198] usb 2-3: New USB device found, idVendor=0bda, idProduct=0151 [ 1.367280] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.367364] usb 2-3: Product: USB2.0-CRW [ 1.367431] usb 2-3: Manufacturer: Generic [ 1.367497] usb 2-3: SerialNumber: 20060413092100000 [ 1.367598] usb 2-3: uevent [ 1.367645] usb 2-3: usb_probe_device [ 1.367647] usb 2-3: configuration #1 chosen from 1 choice [ 1.368321] usb 2-3: adding 2-3:1.0 (config #1, interface 0) [ 1.369074] usb 2-3:1.0: uevent [ 1.369150] usb-storage 2-3:1.0: usb_probe_interface [ 1.369154] usb-storage 2-3:1.0: usb_probe_interface - got id [ 1.369203] scsi4 : SCSI emulation for USB Mass Storage devices [ 1.369381] usb-storage: device found at 2 [ 1.369383] usb-storage: waiting for device to settle before scanning [ 1.369473] drivers/usb/core/inode.c: creating file '002' [ 1.369526] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0006 [ 1.369531] uhci_hcd 0000:00:1a.2: port 1 portsc 01a3,00 [ 1.369536] hub 5-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s [ 1.454028] usb usb3: suspend_rh (auto-stop) [ 1.454049] usb usb4: suspend_rh (auto-stop) [ 1.454069] usb usb6: suspend_rh (auto-stop) [ 1.454089] usb usb8: suspend_rh (auto-stop) [ 1.454117] usb usb7: suspend_rh (auto-stop) [ 1.473031] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 [ 1.575025] usb 5-1: new low speed USB device using uhci_hcd and address 2 [ 1.745435] usb 5-1: skipped 1 descriptor after interface [ 1.745440] usb 5-1: skipped 1 descriptor after interface [ 1.751429] usb 5-1: default language 0x0409 [ 1.775430] usb 5-1: New USB device found, idVendor=0d62, idProduct=2106 [ 1.775511] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.775594] usb 5-1: Product: USB Multimedia Keyboard [ 1.775689] usb 5-1: uevent [ 1.775727] usb 5-1: usb_probe_device [ 1.775729] usb 5-1: configuration #1 chosen from 1 choice [ 1.778433] usb 5-1: adding 5-1:1.0 (config #1, interface 0) [ 1.778459] usb 5-1:1.0: uevent [ 1.778547] usbhid 5-1:1.0: usb_probe_interface [ 1.778549] usbhid 5-1:1.0: usb_probe_interface - got id [ 1.809733] input: USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input2 [ 1.809856] uhci_hcd 0000:00:1a.2: reserve dev 2 ep81-INT, period 8, phase 4, 118 us [ 1.809949] generic-usb 0003:0D62:2106.0001: input,hidraw0: USB HID v1.10 Keyboard [USB Multimedia Keyboard] on usb-0000:00:1a.2-1/input0 [ 1.810143] usb 5-1: adding 5-1:1.1 (config #1, interface 1) [ 1.810155] usb 5-1:1.1: uevent [ 1.810196] usbhid 5-1:1.1: usb_probe_interface [ 1.810198] usbhid 5-1:1.1: usb_probe_interface - got id [ 1.849561] input: USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input3 [ 1.849682] uhci_hcd 0000:00:1a.2: reserve dev 2 ep82-INT, period 8, phase 4, 118 us [ 1.849772] generic-usb 0003:0D62:2106.0002: input,hidraw1: USB HID v1.10 Device [USB Multimedia Keyboard] on usb-0000:00:1a.2-1/input1 [ 1.849953] drivers/usb/core/inode.c: creating file '002' [ 1.850019] uhci_hcd 0000:00:1a.2: port 2 portsc 01a3,00 [ 1.850024] hub 5-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s [ 1.863203] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.863294] ata2.01: SATA link down (SStatus 0 SControl 300) [ 1.866222] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GH30N, A102, max UDMA/100 [ 1.872236] ata2.00: configured for UDMA/100 [ 1.873879] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GH30N A102 PQ: 0 ANSI: 5 [ 1.877656] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.877780] Uniform CD-ROM driver Revision: 3.20 [ 1.877969] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.878068] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.954038] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301 [ 2.056026] usb 5-2: new low speed USB device using uhci_hcd and address 3 [ 2.102027] async/1 used greatest stack depth: 6972 bytes left [ 2.168025] async/4 used greatest stack depth: 6828 bytes left [ 2.193816] ata4: SATA link down (SStatus 0 SControl 300) [ 2.193911] Freeing unused kernel memory: 344k freed [ 2.194158] Write protecting the kernel text: 3884k [ 2.194259] Write protecting the kernel read-only data: 1708k [ 2.201426] usb 5-2: skipped 1 descriptor after interface [ 2.205423] usb 5-2: default language 0x0409 [ 2.212492] usb usb3: uevent [ 2.212507] usb 3-0:1.0: uevent [ 2.212579] usb usb4: uevent [ 2.212593] usb 4-0:1.0: uevent [ 2.212663] usb usb5: uevent [ 2.212677] usb 5-0:1.0: uevent [ 2.212710] usb 5-1: uevent [ 2.212724] usb 5-1:1.0: uevent [ 2.212823] usb 5-1:1.1: uevent [ 2.212970] usb usb1: uevent [ 2.212984] usb 1-0:1.0: uevent [ 2.213421] usb usb6: uevent [ 2.213435] usb 6-0:1.0: uevent [ 2.213506] usb usb7: uevent [ 2.213520] usb 7-0:1.0: uevent [ 2.213590] usb usb8: uevent [ 2.213605] usb 8-0:1.0: uevent [ 2.213677] usb usb2: uevent [ 2.213691] usb 2-0:1.0: uevent [ 2.213719] usb 2-3: uevent [ 2.213733] usb 2-3:1.0: uevent [ 2.220426] usb 5-2: New USB device found, idVendor=413c, idProduct=3012 [ 2.220539] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.220613] usb 5-2: Product: Dell USB Optical Mouse [ 2.220682] usb 5-2: Manufacturer: Dell [ 2.220811] usb 5-2: uevent [ 2.220823] usb 5-2: usb_probe_device [ 2.220826] usb 5-2: configuration #1 chosen from 1 choice [ 2.223433] usb 5-2: adding 5-2:1.0 (config #1, interface 0) [ 2.223461] usb 5-2:1.0: uevent [ 2.223483] usbhid 5-2:1.0: usb_probe_interface [ 2.223485] usbhid 5-2:1.0: usb_probe_interface - got id [ 2.231407] load-modules.sh used greatest stack depth: 6692 bytes left [ 2.236626] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input4 [ 2.236831] generic-usb 0003:413C:3012.0003: input,hidraw2: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1a.2-2/input0 [ 2.236992] drivers/usb/core/inode.c: creating file '003' [ 2.237028] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.237033] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.266568] udevd used greatest stack depth: 6516 bytes left [ 2.680821] kjournald starting. Commit interval 5 seconds [ 2.680908] EXT3-fs: mounted filesystem with writeback data mode. [ 2.701035] hub 3-0:1.0: hub_suspend [ 2.701044] usb usb3: bus auto-suspend [ 2.701049] usb usb3: suspend_rh [ 2.701067] hub 4-0:1.0: hub_suspend [ 2.701071] usb usb4: bus auto-suspend [ 2.701074] usb usb4: suspend_rh [ 2.701090] hub 6-0:1.0: hub_suspend [ 2.701094] usb usb6: bus auto-suspend [ 2.701097] usb usb6: suspend_rh [ 2.701113] hub 8-0:1.0: hub_suspend [ 2.701117] usb usb8: bus auto-suspend [ 2.701120] usb usb8: suspend_rh [ 2.701145] hub 1-0:1.0: hub_suspend [ 2.701147] usb usb1: bus auto-suspend [ 2.701149] ehci_hcd 0000:00:1a.7: suspend root hub [ 3.209914] stty used greatest stack depth: 6376 bytes left [ 4.109802] udev: starting version 141 [ 4.149069] usb usb3: uevent [ 4.149086] usb 3-0:1.0: uevent [ 4.149161] usb usb4: uevent [ 4.149177] usb 4-0:1.0: uevent [ 4.149249] usb usb5: uevent [ 4.149263] usb 5-0:1.0: uevent [ 4.149291] usb 5-1: uevent [ 4.149307] usb 5-1:1.0: uevent [ 4.149410] usb 5-1:1.1: uevent [ 4.149512] usb 5-2: uevent [ 4.149526] usb 5-2:1.0: uevent [ 4.149680] usb usb1: uevent [ 4.149696] usb 1-0:1.0: uevent [ 4.150129] usb usb6: uevent [ 4.150144] usb 6-0:1.0: uevent [ 4.150215] usb usb7: uevent [ 4.150230] usb 7-0:1.0: uevent [ 4.150302] usb usb8: uevent [ 4.150315] usb 8-0:1.0: uevent [ 4.150386] usb usb2: uevent [ 4.150400] usb 2-0:1.0: uevent [ 4.150428] usb 2-3: uevent [ 4.150444] usb 2-3:1.0: uevent [ 4.152694] udevadm used greatest stack depth: 6172 bytes left [ 4.657581] usb 5-2:1.0: uevent [ 4.657660] usb 5-2: uevent [ 4.658296] usb 5-1:1.0: uevent [ 4.658374] usb 5-1: uevent [ 4.659027] usb 5-1:1.1: uevent [ 4.659102] usb 5-1: uevent [ 4.659693] usb 5-2:1.0: uevent [ 4.659764] usb 5-2: uevent [ 4.701151] hub 7-0:1.0: hub_suspend [ 4.701159] usb usb7: bus auto-suspend [ 4.701162] usb usb7: suspend_rh [ 5.359256] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 5.359694] EXT3 FS on sda3, internal journal [ 5.772923] EXT4-fs: barriers enabled [ 5.774326] kjournald2 starting: pid 3227, dev sda2:8, commit interval 5 seconds [ 5.774340] EXT4-fs: delayed allocation enabled [ 5.774345] EXT4-fs: file extents enabled [ 5.785745] EXT4-fs: mballoc enabled [ 5.785757] EXT4-fs: mounted filesystem sda2 with ordered data mode [ 5.810682] Adding 8426084k swap on /dev/sda4. Priority:-1 extents:1 across:8426084k [ 6.375466] scsi 4:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS [ 6.375583] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 6.375785] usb-storage: device scan complete [ 6.377260] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 6.378721] usb 2-3:1.0: uevent [ 6.378811] usb 2-3: uevent [ 7.644239] loadkeys used greatest stack depth: 6104 bytes left [ 10.159560] usb usb3: uevent [ 10.159621] usb 3-0:1.0: uevent [ 10.159830] usb usb4: uevent [ 10.159876] usb 4-0:1.0: uevent [ 10.160276] usb usb5: uevent [ 10.160323] usb 5-0:1.0: uevent [ 10.160416] usb 5-1: uevent [ 10.160464] usb 5-1:1.0: uevent [ 10.160750] usb 5-1:1.1: uevent [ 10.161209] usb 5-2: uevent [ 10.161257] usb 5-2:1.0: uevent [ 10.161774] usb usb1: uevent [ 10.161820] usb 1-0:1.0: uevent [ 10.163142] usb usb6: uevent [ 10.163189] usb 6-0:1.0: uevent [ 10.163409] usb usb7: uevent [ 10.163455] usb 7-0:1.0: uevent [ 10.163658] usb usb8: uevent [ 10.163704] usb 8-0:1.0: uevent [ 10.163922] usb usb2: uevent [ 10.163968] usb 2-0:1.0: uevent [ 10.164254] usb 2-3: uevent [ 10.164302] usb 2-3:1.0: uevent [ 10.704729] r8169: eth0: link up [ 10.704737] r8169: eth0: link up [ 21.117022] eth0: no IPv6 routers present [ 46.587569] ------------[ cut here ]------------ [ 46.587583] WARNING: at drivers/gpu/drm/drm_sysfs.c:452 drm_sysfs_hotplug_event+0x2b/0x63() [ 46.587587] Hardware name: Studio 540 [ 46.587589] hotplug uevent [ 46.587592] Modules linked in: [ 46.587598] Pid: 7, comm: events/0 Not tainted 2.6.30.1 #1 [ 46.587601] Call Trace: [ 46.587610] [] warn_slowpath_common+0x65/0x7c [ 46.587617] [] ? drm_sysfs_hotplug_event+0x2b/0x63 [ 46.587623] [] warn_slowpath_fmt+0x24/0x27 [ 46.587629] [] drm_sysfs_hotplug_event+0x2b/0x63 [ 46.587636] [] i915_hotplug_work_func+0xe/0x10 [ 46.587643] [] worker_thread+0x131/0x1ab [ 46.587649] [] ? i915_hotplug_work_func+0x0/0x10 [ 46.587655] [] ? autoremove_wake_function+0x0/0x2f [ 46.587661] [] ? worker_thread+0x0/0x1ab [ 46.587665] [] kthread+0x46/0x6a [ 46.587670] [] ? kthread+0x0/0x6a [ 46.587676] [] kernel_thread_helper+0x7/0x10 [ 46.587684] ---[ end trace ed36ea6940856580 ]--- [ 47.337035] uhci_hcd 0000:00:1a.2: reserve dev 3 ep81-INT, period 8, phase 4, 99 us [ 96.254444] python used greatest stack depth: 5800 bytes left [ 250.285244] kwrite used greatest stack depth: 5536 bytes left [ 261.240321] ------------[ cut here ]------------ [ 261.240335] WARNING: at drivers/gpu/drm/drm_sysfs.c:452 drm_sysfs_hotplug_event+0x2b/0x63() [ 261.240339] Hardware name: Studio 540 [ 261.240341] hotplug uevent [ 261.240344] Modules linked in: [ 261.240350] Pid: 8, comm: events/1 Tainted: G W 2.6.30.1 #1 [ 261.240353] Call Trace: [ 261.240363] [] warn_slowpath_common+0x65/0x7c [ 261.240369] [] ? drm_sysfs_hotplug_event+0x2b/0x63 [ 261.240375] [] warn_slowpath_fmt+0x24/0x27 [ 261.240381] [] drm_sysfs_hotplug_event+0x2b/0x63 [ 261.240388] [] i915_hotplug_work_func+0xe/0x10 [ 261.240395] [] worker_thread+0x131/0x1ab [ 261.240401] [] ? i915_hotplug_work_func+0x0/0x10 [ 261.240407] [] ? autoremove_wake_function+0x0/0x2f [ 261.240412] [] ? worker_thread+0x0/0x1ab [ 261.240417] [] kthread+0x46/0x6a [ 261.240422] [] ? kthread+0x0/0x6a [ 261.240431] [] kernel_thread_helper+0x7/0x10 [ 261.240433] ---[ end trace ed36ea6940856581 ]--- [ 265.100408] ------------[ cut here ]------------ [ 265.100417] WARNING: at drivers/gpu/drm/drm_sysfs.c:452 drm_sysfs_hotplug_event+0x2b/0x63() [ 265.100420] Hardware name: Studio 540 [ 265.100421] hotplug uevent [ 265.100422] Modules linked in: [ 265.100425] Pid: 7, comm: events/0 Tainted: G W 2.6.30.1 #1 [ 265.100427] Call Trace: [ 265.100433] [] warn_slowpath_common+0x65/0x7c [ 265.100436] [] ? drm_sysfs_hotplug_event+0x2b/0x63 [ 265.100439] [] warn_slowpath_fmt+0x24/0x27 [ 265.100442] [] drm_sysfs_hotplug_event+0x2b/0x63 [ 265.100445] [] i915_hotplug_work_func+0xe/0x10 [ 265.100449] [] worker_thread+0x131/0x1ab [ 265.100452] [] ? i915_hotplug_work_func+0x0/0x10 [ 265.100455] [] ? autoremove_wake_function+0x0/0x2f [ 265.100458] [] ? worker_thread+0x0/0x1ab [ 265.100460] [] kthread+0x46/0x6a [ 265.100462] [] ? kthread+0x0/0x6a [ 265.100466] [] kernel_thread_helper+0x7/0x10 [ 265.100468] ---[ end trace ed36ea6940856582 ]--- [ 267.065312] ------------[ cut here ]------------ [ 267.065325] WARNING: at drivers/gpu/drm/drm_sysfs.c:452 drm_sysfs_hotplug_event+0x2b/0x63() [ 267.065330] Hardware name: Studio 540 [ 267.065332] hotplug uevent [ 267.065334] Modules linked in: [ 267.065340] Pid: 8, comm: events/1 Tainted: G W 2.6.30.1 #1 [ 267.065343] Call Trace: [ 267.065352] [] warn_slowpath_common+0x65/0x7c [ 267.065359] [] ? drm_sysfs_hotplug_event+0x2b/0x63 [ 267.065365] [] warn_slowpath_fmt+0x24/0x27 [ 267.065371] [] drm_sysfs_hotplug_event+0x2b/0x63 [ 267.065378] [] i915_hotplug_work_func+0xe/0x10 [ 267.065385] [] worker_thread+0x131/0x1ab [ 267.065391] [] ? i915_hotplug_work_func+0x0/0x10 [ 267.065397] [] ? autoremove_wake_function+0x0/0x2f [ 267.065402] [] ? worker_thread+0x0/0x1ab [ 267.065407] [] kthread+0x46/0x6a [ 267.065411] [] ? kthread+0x0/0x6a [ 267.065417] [] kernel_thread_helper+0x7/0x10 [ 267.065421] ---[ end trace ed36ea6940856583 ]---