| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200907250612.n6P6CFxF025115@swe57.brocade.com>
Date: Fri, 24 Jul 2009 23:12:15 -0700
From: Jing Huang <huangj@...cade.com>
To: James.Bottomley@...senPartnership.com
Cc: linux-kernel@...r.kernel.org, linux-scsi@...r.kernel.org,
rvadivel@...cade.com, vravindr@...cade.com
Subject: [PATCH 11/14] bfa: Brocade BFA FC SCSI driver (include part-2)
From: Jing Huang <huangj@...cade.com>
This patch contains common header files for linux driver,
hardware/firmeare interface, and FC state machines. part-2
Signed-off-by: Jing Huang <huangj@...cade.com>
---
cs/bfa_q.h | 81 +++++++++
cs/bfa_sm.h | 69 ++++++++
cs/bfa_trc.h | 176 +++++++++++++++++++++
cs/bfa_wc.h | 68 ++++++++
defs/bfa_defs_adapter.h | 82 +++++++++
defs/bfa_defs_aen.h | 73 ++++++++
defs/bfa_defs_audit.h | 38 ++++
defs/bfa_defs_auth.h | 112 +++++++++++++
defs/bfa_defs_boot.h | 71 ++++++++
defs/bfa_defs_cee.h | 159 +++++++++++++++++++
defs/bfa_defs_driver.h | 40 ++++
defs/bfa_defs_ethport.h | 98 +++++++++++
defs/bfa_defs_fcpim.h | 45 +++++
defs/bfa_defs_im_common.h | 32 +++
defs/bfa_defs_im_team.h | 72 ++++++++
defs/bfa_defs_ioc.h | 152 ++++++++++++++++++
defs/bfa_defs_iocfc.h | 310 +++++++++++++++++++++++++++++++++++++
defs/bfa_defs_ipfc.h | 70 ++++++++
defs/bfa_defs_itnim.h | 126 +++++++++++++++
defs/bfa_defs_led.h | 35 ++++
defs/bfa_defs_lport.h | 68 ++++++++
defs/bfa_defs_mfg.h | 58 ++++++
defs/bfa_defs_pci.h | 41 ++++
defs/bfa_defs_pm.h | 33 +++
defs/bfa_defs_pom.h | 56 ++++++
defs/bfa_defs_port.h | 245 +++++++++++++++++++++++++++++
defs/bfa_defs_pport.h | 383 ++++++++++++++++++++++++++++++++++++++++++++++
defs/bfa_defs_qos.h | 99 +++++++++++
defs/bfa_defs_rport.h | 199 +++++++++++++++++++++++
defs/bfa_defs_status.h | 255 ++++++++++++++++++++++++++++++
defs/bfa_defs_tin.h | 118 ++++++++++++++
defs/bfa_defs_tsensor.h | 43 +++++
defs/bfa_defs_types.h | 30 +++
defs/bfa_defs_version.h | 22 ++
defs/bfa_defs_vf.h | 74 ++++++++
defs/bfa_defs_vport.h | 91 ++++++++++
fcb/bfa_fcb.h | 33 +++
fcb/bfa_fcb_fcpim.h | 76 +++++++++
fcb/bfa_fcb_port.h | 113 +++++++++++++
fcb/bfa_fcb_rport.h | 80 +++++++++
fcb/bfa_fcb_vf.h | 47 +++++
fcb/bfa_fcb_vport.h | 47 +++++
fcs/bfa_fcs.h | 73 ++++++++
fcs/bfa_fcs_auth.h | 82 +++++++++
fcs/bfa_fcs_fabric.h | 112 +++++++++++++
fcs/bfa_fcs_fcpim.h | 131 +++++++++++++++
fcs/bfa_fcs_fdmi.h | 63 +++++++
47 files changed, 4581 insertions(+)
diff -urpN orig/drivers/scsi/bfa/include/cs/bfa_q.h patch/drivers/scsi/bfa/include/cs/bfa_q.h
--- orig/drivers/scsi/bfa/include/cs/bfa_q.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/cs/bfa_q.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,81 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_q.h Circular queue definitions.
+ */
+
+#ifndef __BFA_Q_H__
+#define __BFA_Q_H__
+
+#define bfa_q_first(_q) ((void *)(((struct list_head *) (_q))->next))
+#define bfa_q_next(_qe) (((struct list_head *) (_qe))->next)
+#define bfa_q_prev(_qe) (((struct list_head *) (_qe))->prev)
+
+/*
+ * bfa_q_qe_init - to initialize a queue element
+ */
+#define bfa_q_qe_init(_qe) { \
+ bfa_q_next(_qe) = (struct list_head *) NULL; \
+ bfa_q_prev(_qe) = (struct list_head *) NULL; \
+}
+
+/*
+ * bfa_q_deq - dequeue an element from head of the queue
+ */
+#define bfa_q_deq(_q, _qe) { \
+ if (!list_empty(_q)) { \
+ (*((struct list_head **) (_qe))) = bfa_q_next(_q); \
+ bfa_q_prev(bfa_q_next(*((struct list_head **) _qe))) = \
+ (struct list_head *) (_q); \
+ bfa_q_next(_q) = bfa_q_next(*((struct list_head **) _qe)); \
+ BFA_Q_DBG_INIT(*((struct list_head **) _qe)); \
+ } else { \
+ *((struct list_head **) (_qe)) = (struct list_head *) NULL; \
+ } \
+}
+
+/*
+ * bfa_q_deq_tail - dequeue an element from tail of the queue
+ */
+#define bfa_q_deq_tail(_q, _qe) { \
+ if (!list_empty(_q)) { \
+ *((struct list_head **) (_qe)) = bfa_q_prev(_q); \
+ bfa_q_next(bfa_q_prev(*((struct list_head **) _qe))) = \
+ (struct list_head *) (_q); \
+ bfa_q_prev(_q) = bfa_q_prev(*(struct list_head **) _qe); \
+ BFA_Q_DBG_INIT(*((struct list_head **) _qe)); \
+ } else { \
+ *((struct list_head **) (_qe)) = (struct list_head *) NULL; \
+ } \
+}
+
+/*
+ * #ifdef BFA_DEBUG (Using bfa_assert to check for debug_build is not
+ * consistent across modules)
+ */
+#ifndef BFA_PERF_BUILD
+#define BFA_Q_DBG_INIT(_qe) bfa_q_qe_init(_qe)
+#else
+#define BFA_Q_DBG_INIT(_qe)
+#endif
+
+#define bfa_q_is_on_q(_q, _qe) \
+ bfa_q_is_on_q_func(_q, (struct list_head *)(_qe))
+extern int bfa_q_is_on_q_func(struct list_head *q, struct list_head *qe);
+
+#endif
diff -urpN orig/drivers/scsi/bfa/include/cs/bfa_sm.h patch/drivers/scsi/bfa/include/cs/bfa_sm.h
--- orig/drivers/scsi/bfa/include/cs/bfa_sm.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/cs/bfa_sm.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,69 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfasm.h State machine defines
+ */
+
+#ifndef __BFA_SM_H__
+#define __BFA_SM_H__
+
+typedef void (*bfa_sm_t)(void *sm, int event);
+
+#define bfa_sm_set_state(_sm, _state) (_sm)->sm = (bfa_sm_t)(_state)
+#define bfa_sm_send_event(_sm, _event) (_sm)->sm((_sm), (_event))
+#define bfa_sm_get_state(_sm) ((_sm)->sm)
+#define bfa_sm_cmp_state(_sm, _state) ((_sm)->sm == (bfa_sm_t)(_state))
+
+/**
+ * For converting from state machine function to state encoding.
+ */
+struct bfa_sm_table_s {
+ bfa_sm_t sm; /* state machine function */
+ int state; /* state machine encoding */
+ char *name; /* state name for display */
+};
+#define BFA_SM(_sm) ((bfa_sm_t)(_sm))
+
+int bfa_sm_to_state(struct bfa_sm_table_s *smt, bfa_sm_t sm);
+
+/**
+ * State machine with entry actions.
+ */
+typedef void (*bfa_fsm_t)(void *fsm, int event);
+
+/**
+ * oc - object class eg. bfa_ioc
+ * st - state, eg. reset
+ * otype - object type, eg. struct bfa_ioc_s
+ * etype - object type, eg. enum ioc_event
+ */
+#define bfa_fsm_state_decl(oc, st, otype, etype) \
+ static void oc ## _sm_ ## st(otype * fsm, etype event); \
+ static void oc ## _sm_ ## st ## _entry(otype * fsm)
+
+#define bfa_fsm_set_state(_fsm, _state) do { \
+ (_fsm)->fsm = (bfa_fsm_t)(_state); \
+ _state ## _entry(_fsm); \
+} while (0)
+
+#define bfa_fsm_send_event(_fsm, _event) \
+ (_fsm)->fsm((_fsm), (_event))
+#define bfa_fsm_cmp_state(_fsm, _state) \
+ ((_fsm)->fsm == (bfa_fsm_t)(_state))
+
+#endif
diff -urpN orig/drivers/scsi/bfa/include/cs/bfa_trc.h patch/drivers/scsi/bfa/include/cs/bfa_trc.h
--- orig/drivers/scsi/bfa/include/cs/bfa_trc.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/cs/bfa_trc.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,176 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_TRC_H__
+#define __BFA_TRC_H__
+
+#include <bfa_os_inc.h>
+
+#ifndef BFA_TRC_MAX
+#define BFA_TRC_MAX (4 * 1024)
+#endif
+
+#ifndef BFA_TRC_TS
+#define BFA_TRC_TS(_trcm) ((_trcm)->ticks ++)
+#endif
+
+struct bfa_trc_s {
+#ifdef __BIGENDIAN
+ u16 fileno;
+ u16 line;
+#else
+ u16 line;
+ u16 fileno;
+#endif
+ u32 timestamp;
+ union {
+ struct {
+ u32 rsvd;
+ u32 u32;
+ } u32;
+ u64 u64;
+ } data;
+};
+
+
+struct bfa_trc_mod_s {
+ u32 head;
+ u32 tail;
+ u32 ntrc;
+ u32 stopped;
+ u32 ticks;
+ u32 rsvd[3];
+ struct bfa_trc_s trc[BFA_TRC_MAX];
+};
+
+
+enum {
+ BFA_TRC_FW = 1, /* firmware modules */
+ BFA_TRC_HAL = 2, /* BFA modules */
+ BFA_TRC_FCS = 3, /* BFA FCS modules */
+ BFA_TRC_LDRV = 4, /* Linux driver modules */
+ BFA_TRC_SDRV = 5, /* Solaris driver modules */
+ BFA_TRC_VDRV = 6, /* vmware driver modules */
+ BFA_TRC_WDRV = 7, /* windows driver modules */
+ BFA_TRC_AEN = 8, /* AEN module */
+ BFA_TRC_BIOS = 9, /* bios driver modules */
+ BFA_TRC_EFI = 10, /* EFI driver modules */
+ BNA_TRC_WDRV = 11, /* BNA windows driver modules */
+ BNA_TRC_VDRV = 12, /* BNA vmware driver modules */
+ BNA_TRC_SDRV = 13, /* BNA Solaris driver modules */
+ BNA_TRC_LDRV = 14, /* BNA Linux driver modules */
+ BNA_TRC_HAL = 15, /* BNA modules */
+ BFA_TRC_CNA = 16, /* Common modules */
+ BNA_TRC_IMDRV = 17 /* BNA windows intermediate driver modules */
+};
+#define BFA_TRC_MOD_SH 10
+#define BFA_TRC_MOD(__mod) ((BFA_TRC_ ## __mod) << BFA_TRC_MOD_SH)
+
+/**
+ * Define a new tracing file (module). Module should match one defined above.
+ */
+#define BFA_TRC_FILE(__mod, __submod) \
+ static int __trc_fileno = ((BFA_TRC_ ## __mod ## _ ## __submod) | \
+ BFA_TRC_MOD(__mod))
+
+
+#define bfa_trc32(_trcp, _data) \
+ __bfa_trc((_trcp)->trcmod, __trc_fileno, __LINE__, (u32)_data)
+
+
+#ifndef BFA_BOOT_BUILD
+#define bfa_trc(_trcp, _data) \
+ __bfa_trc((_trcp)->trcmod, __trc_fileno, __LINE__, (u64)_data)
+#else
+void bfa_boot_trc(struct bfa_trc_mod_s *trcmod, u16 fileno,
+ u16 line, u32 data);
+#define bfa_trc(_trcp, _data) \
+ bfa_boot_trc((_trcp)->trcmod, __trc_fileno, __LINE__, (u32)_data)
+#endif
+
+
+static inline void
+bfa_trc_init(struct bfa_trc_mod_s *trcm)
+{
+ trcm->head = trcm->tail = trcm->stopped = 0;
+ trcm->ntrc = BFA_TRC_MAX;
+}
+
+
+static inline void
+bfa_trc_stop(struct bfa_trc_mod_s *trcm)
+{
+ trcm->stopped = 1;
+}
+
+#ifdef FWTRC
+extern void dc_flush(void *data);
+#else
+#define dc_flush(data)
+#endif
+
+
+static inline void
+__bfa_trc(struct bfa_trc_mod_s *trcm, int fileno, int line, u64 data)
+{
+ int tail = trcm->tail;
+ struct bfa_trc_s *trc = &trcm->trc[tail];
+
+ if (trcm->stopped)
+ return;
+
+ trc->fileno = (u16) fileno;
+ trc->line = (u16) line;
+ trc->data.u64 = data;
+ trc->timestamp = BFA_TRC_TS(trcm);
+ dc_flush(trc);
+
+ trcm->tail = (trcm->tail + 1) & (BFA_TRC_MAX - 1);
+ if (trcm->tail == trcm->head)
+ trcm->head = (trcm->head + 1) & (BFA_TRC_MAX - 1);
+ dc_flush(trcm);
+}
+
+
+static inline void
+__bfa_trc32(struct bfa_trc_mod_s *trcm, int fileno, int line, u32 data)
+{
+ int tail = trcm->tail;
+ struct bfa_trc_s *trc = &trcm->trc[tail];
+
+ if (trcm->stopped)
+ return;
+
+ trc->fileno = (u16) fileno;
+ trc->line = (u16) line;
+ trc->data.u32.u32 = data;
+ trc->timestamp = BFA_TRC_TS(trcm);
+ dc_flush(trc);
+
+ trcm->tail = (trcm->tail + 1) & (BFA_TRC_MAX - 1);
+ if (trcm->tail == trcm->head)
+ trcm->head = (trcm->head + 1) & (BFA_TRC_MAX - 1);
+ dc_flush(trcm);
+}
+
+#ifndef BFA_PERF_BUILD
+#define bfa_trc_fp(_trcp, _data) bfa_trc(_trcp, _data)
+#else
+#define bfa_trc_fp(_trcp, _data)
+#endif
+
+#endif /* __BFA_TRC_H__ */
+
diff -urpN orig/drivers/scsi/bfa/include/cs/bfa_wc.h patch/drivers/scsi/bfa/include/cs/bfa_wc.h
--- orig/drivers/scsi/bfa/include/cs/bfa_wc.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/cs/bfa_wc.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,68 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_wc.h Generic wait counter.
+ */
+
+#ifndef __BFA_WC_H__
+#define __BFA_WC_H__
+
+typedef void (*bfa_wc_resume_t) (void *cbarg);
+
+struct bfa_wc_s {
+ bfa_wc_resume_t wc_resume;
+ void *wc_cbarg;
+ int wc_count;
+};
+
+static inline void
+bfa_wc_up(struct bfa_wc_s *wc)
+{
+ wc->wc_count++;
+}
+
+static inline void
+bfa_wc_down(struct bfa_wc_s *wc)
+{
+ wc->wc_count--;
+ if (wc->wc_count == 0)
+ wc->wc_resume(wc->wc_cbarg);
+}
+
+/**
+ * Initialize a waiting counter.
+ */
+static inline void
+bfa_wc_init(struct bfa_wc_s *wc, bfa_wc_resume_t wc_resume, void *wc_cbarg)
+{
+ wc->wc_resume = wc_resume;
+ wc->wc_cbarg = wc_cbarg;
+ wc->wc_count = 0;
+ bfa_wc_up(wc);
+}
+
+/**
+ * Wait for counter to reach zero
+ */
+static inline void
+bfa_wc_wait(struct bfa_wc_s *wc)
+{
+ bfa_wc_down(wc);
+}
+
+#endif
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_adapter.h patch/drivers/scsi/bfa/include/defs/bfa_defs_adapter.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_adapter.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_adapter.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,82 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_ADAPTER_H__
+#define __BFA_DEFS_ADAPTER_H__
+
+#include <protocol/types.h>
+#include <defs/bfa_defs_version.h>
+#include <defs/bfa_defs_mfg.h>
+
+/**
+ * BFA adapter level attributes.
+ */
+enum {
+ BFA_ADAPTER_SERIAL_NUM_LEN = STRSZ(BFA_MFG_SERIALNUM_SIZE),
+ /*
+ *!< adapter serial num length
+ */
+ BFA_ADAPTER_MODEL_NAME_LEN = 16, /* model name length */
+ BFA_ADAPTER_MODEL_DESCR_LEN = 128, /* model description length */
+ BFA_ADAPTER_MFG_NAME_LEN = 8, /* manufacturer name length */
+ BFA_ADAPTER_SYM_NAME_LEN = 64, /* adapter symbolic name length */
+ BFA_ADAPTER_OS_TYPE_LEN = 64, /* adapter os type length */
+};
+
+struct bfa_adapter_attr_s {
+ char manufacturer[BFA_ADAPTER_MFG_NAME_LEN];
+ char serial_num[BFA_ADAPTER_SERIAL_NUM_LEN];
+ u32 rsvd1;
+ char model[BFA_ADAPTER_MODEL_NAME_LEN];
+ char model_descr[BFA_ADAPTER_MODEL_DESCR_LEN];
+ wwn_t pwwn;
+ char node_symname[FC_SYMNAME_MAX];
+ char hw_ver[BFA_VERSION_LEN];
+ char fw_ver[BFA_VERSION_LEN];
+ char optrom_ver[BFA_VERSION_LEN];
+ char os_type[BFA_ADAPTER_OS_TYPE_LEN];
+ struct bfa_mfg_vpd_s vpd;
+ struct mac_s mac;
+
+ u8 nports;
+ u8 max_speed;
+ u8 prototype;
+ char asic_rev;
+
+ u8 pcie_gen;
+ u8 pcie_lanes_orig;
+ u8 pcie_lanes;
+ u8 cna_capable;
+};
+
+/**
+ * BFA adapter level events
+ * Arguments below are in BFAL context from Mgmt
+ * BFA_PORT_AEN_ADD: [in]: None [out]: serial_num, pwwn, nports
+ * BFA_PORT_AEN_REMOVE: [in]: pwwn [out]: serial_num, pwwn, nports
+ */
+enum bfa_adapter_aen_event {
+ BFA_ADAPTER_AEN_ADD = 1, /* New Adapter found event */
+ BFA_ADAPTER_AEN_REMOVE = 2, /* Adapter removed event */
+};
+
+struct bfa_adapter_aen_data_s {
+ char serial_num[BFA_ADAPTER_SERIAL_NUM_LEN];
+ u32 nports; /* Number of NPorts */
+ wwn_t pwwn; /* WWN of one of its physical port */
+};
+
+#endif /* __BFA_DEFS_ADAPTER_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_aen.h patch/drivers/scsi/bfa/include/defs/bfa_defs_aen.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_aen.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_aen.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,73 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_AEN_H__
+#define __BFA_DEFS_AEN_H__
+
+#include <defs/bfa_defs_types.h>
+#include <defs/bfa_defs_ioc.h>
+#include <defs/bfa_defs_adapter.h>
+#include <defs/bfa_defs_port.h>
+#include <defs/bfa_defs_lport.h>
+#include <defs/bfa_defs_rport.h>
+#include <defs/bfa_defs_itnim.h>
+#include <defs/bfa_defs_tin.h>
+#include <defs/bfa_defs_ipfc.h>
+#include <defs/bfa_defs_audit.h>
+#include <defs/bfa_defs_ethport.h>
+
+enum bfa_aen_category {
+ BFA_AEN_CAT_ADAPTER = 1,
+ BFA_AEN_CAT_PORT = 2,
+ BFA_AEN_CAT_LPORT = 3,
+ BFA_AEN_CAT_RPORT = 4,
+ BFA_AEN_CAT_ITNIM = 5,
+ BFA_AEN_CAT_TIN = 6,
+ BFA_AEN_CAT_IPFC = 7,
+ BFA_AEN_CAT_AUDIT = 8,
+ BFA_AEN_CAT_IOC = 9,
+ BFA_AEN_CAT_ETHPORT = 10,
+ BFA_AEN_MAX_CAT = 10
+};
+
+#pragma pack(1)
+union bfa_aen_data_u {
+ struct bfa_adapter_aen_data_s adapter;
+ struct bfa_port_aen_data_s port;
+ struct bfa_lport_aen_data_s lport;
+ struct bfa_rport_aen_data_s rport;
+ struct bfa_itnim_aen_data_s itnim;
+ struct bfa_audit_aen_data_s audit;
+ struct bfa_ioc_aen_data_s ioc;
+ struct bfa_ethport_aen_data_s ethport;
+};
+
+struct bfa_aen_entry_s {
+ enum bfa_aen_category aen_category;
+ int aen_type;
+ union bfa_aen_data_u aen_data;
+ struct bfa_timeval_s aen_tv;
+ s32 seq_num;
+ s32 bfad_num;
+ s32 rsvd[1];
+};
+
+#pragma pack()
+
+#define bfa_aen_event_t int
+
+#endif /* __BFA_DEFS_AEN_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_audit.h patch/drivers/scsi/bfa/include/defs/bfa_defs_audit.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_audit.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_audit.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_AUDIT_H__
+#define __BFA_DEFS_AUDIT_H__
+
+#include <bfa_os_inc.h>
+
+/**
+ * BFA audit events
+ */
+enum bfa_audit_aen_event {
+ BFA_AUDIT_AEN_AUTH_ENABLE = 1,
+ BFA_AUDIT_AEN_AUTH_DISABLE = 2,
+};
+
+/**
+ * audit event data
+ */
+struct bfa_audit_aen_data_s {
+ wwn_t pwwn;
+};
+
+#endif /* __BFA_DEFS_AUDIT_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_auth.h patch/drivers/scsi/bfa/include/defs/bfa_defs_auth.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_auth.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_auth.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,112 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_AUTH_H__
+#define __BFA_DEFS_AUTH_H__
+
+#include <defs/bfa_defs_types.h>
+
+#define PUBLIC_KEY 15409
+#define PRIVATE_KEY 19009
+#define KEY_LEN 32399
+#define BFA_AUTH_SECRET_STRING_LEN 256
+#define BFA_AUTH_FAIL_TIMEOUT 0xFF
+
+/**
+ * Authentication status
+ */
+enum bfa_auth_status {
+ BFA_AUTH_STATUS_NONE = 0, /* no authentication */
+ BFA_AUTH_UNINIT = 1, /* state - uninit */
+ BFA_AUTH_NEG_SEND = 2, /* state - negotiate send */
+ BFA_AUTH_CHAL_WAIT = 3, /* state - challenge wait */
+ BFA_AUTH_NEG_RETRY = 4, /* state - negotiate retry */
+ BFA_AUTH_REPLY_SEND = 5, /* state - reply send */
+ BFA_AUTH_STATUS_WAIT = 6, /* state - status wait */
+ BFA_AUTH_SUCCESS = 7, /* state - success */
+ BFA_AUTH_FAILED = 8, /* state - failed */
+ BFA_AUTH_STATUS_UNKNOWN = 9, /* authentication status unknown */
+};
+
+struct auth_proto_stats_s {
+ u32 auth_rjts;
+ u32 auth_negs;
+ u32 auth_dones;
+
+ u32 dhchap_challenges;
+ u32 dhchap_replies;
+ u32 dhchap_successes;
+};
+
+/**
+ * Authentication related statistics
+ */
+struct bfa_auth_stats_s {
+ u32 auth_failures; /* authentication failures */
+ u32 auth_successes; /* authentication successes*/
+ struct auth_proto_stats_s auth_rx_stats; /* Rx protocol stats */
+ struct auth_proto_stats_s auth_tx_stats; /* Tx protocol stats */
+};
+
+/**
+ * Authentication hash function algorithms
+ */
+enum bfa_auth_algo {
+ BFA_AUTH_ALGO_MD5 = 1, /* Message-Digest algorithm 5 */
+ BFA_AUTH_ALGO_SHA1 = 2, /* Secure Hash Algorithm 1 */
+ BFA_AUTH_ALGO_MS = 3, /* MD5, then SHA-1 */
+ BFA_AUTH_ALGO_SM = 4, /* SHA-1, then MD5 */
+};
+
+/**
+ * DH Groups
+ *
+ * Current value could be combination of one or more of the following values
+ */
+enum bfa_auth_group {
+ BFA_AUTH_GROUP_DHNULL = 0, /* DH NULL (value == 0) */
+ BFA_AUTH_GROUP_DH768 = 1, /* DH group 768 (value == 1) */
+ BFA_AUTH_GROUP_DH1024 = 2, /* DH group 1024 (value == 2) */
+ BFA_AUTH_GROUP_DH1280 = 4, /* DH group 1280 (value == 3) */
+ BFA_AUTH_GROUP_DH1536 = 8, /* DH group 1536 (value == 4) */
+
+ BFA_AUTH_GROUP_ALL = 256 /* Use default DH group order
+ * 0, 1, 2, 3, 4 */
+};
+
+/**
+ * Authentication secret sources
+ */
+enum bfa_auth_secretsource {
+ BFA_AUTH_SECSRC_LOCAL = 1, /* locally configured */
+ BFA_AUTH_SECSRC_RADIUS = 2, /* use radius server */
+ BFA_AUTH_SECSRC_TACACS = 3, /* TACACS server */
+};
+
+/**
+ * Authentication attributes
+ */
+struct bfa_auth_attr_s {
+ enum bfa_auth_status status;
+ enum bfa_auth_algo algo;
+ enum bfa_auth_group dh_grp;
+ u16 rjt_code;
+ u16 rjt_code_exp;
+ u8 secret_set;
+ u8 resv[7];
+};
+
+#endif /* __BFA_DEFS_AUTH_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_boot.h patch/drivers/scsi/bfa/include/defs/bfa_defs_boot.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_boot.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_boot.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,71 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_BOOT_H__
+#define __BFA_DEFS_BOOT_H__
+
+#include <protocol/types.h>
+#include <defs/bfa_defs_types.h>
+#include <defs/bfa_defs_pport.h>
+
+enum {
+ BFA_BOOT_BOOTLUN_MAX = 4, /* maximum boot lun per IOC */
+};
+
+#define BOOT_CFG_REV1 1
+
+/**
+ * Boot options setting. Boot options setting determines from where
+ * to get the boot lun information
+ */
+enum bfa_boot_bootopt {
+ BFA_BOOT_AUTO_DISCOVER = 0, /* Boot from blun provided by fabric */
+ BFA_BOOT_STORED_BLUN = 1, /* Boot from bluns stored in flash */
+ BFA_BOOT_FIRST_LUN = 2, /* Boot from first discovered blun */
+};
+
+/**
+ * Boot lun information.
+ */
+struct bfa_boot_bootlun_s {
+ wwn_t pwwn; /* port wwn of target */
+ lun_t lun; /* 64-bit lun */
+};
+
+/**
+ * BOOT boot configuraton
+ */
+struct bfa_boot_cfg_s {
+ u8 version;
+ u8 rsvd1;
+ u16 chksum;
+
+ u8 enable; /* enable/disable SAN boot */
+ u8 speed; /* boot speed settings */
+ u8 topology; /* boot topology setting */
+ u8 bootopt; /* bfa_boot_bootopt_t */
+
+ u32 nbluns; /* number of boot luns */
+
+ u32 rsvd2;
+
+ struct bfa_boot_bootlun_s blun[BFA_BOOT_BOOTLUN_MAX];
+ struct bfa_boot_bootlun_s blun_disc[BFA_BOOT_BOOTLUN_MAX];
+};
+
+
+#endif /* __BFA_DEFS_BOOT_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_cee.h patch/drivers/scsi/bfa/include/defs/bfa_defs_cee.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_cee.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_cee.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,159 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * bfa_defs_cee.h Interface declarations between host based
+ * BFAL and DCBX/LLDP module in Firmware
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_CEE_H__
+#define __BFA_DEFS_CEE_H__
+
+#include <defs/bfa_defs_types.h>
+#include <defs/bfa_defs_pport.h>
+#include <protocol/types.h>
+
+#pragma pack(1)
+
+#define BFA_CEE_LLDP_MAX_STRING_LEN (128)
+
+
+/* FIXME: this is coming from the protocol spec. Can the host & apps share the
+ protocol .h files ?
+ */
+#define BFA_CEE_LLDP_SYS_CAP_OTHER 0x0001
+#define BFA_CEE_LLDP_SYS_CAP_REPEATER 0x0002
+#define BFA_CEE_LLDP_SYS_CAP_MAC_BRIDGE 0x0004
+#define BFA_CEE_LLDP_SYS_CAP_WLAN_AP 0x0008
+#define BFA_CEE_LLDP_SYS_CAP_ROUTER 0x0010
+#define BFA_CEE_LLDP_SYS_CAP_TELEPHONE 0x0020
+#define BFA_CEE_LLDP_SYS_CAP_DOCSIS_CD 0x0040
+#define BFA_CEE_LLDP_SYS_CAP_STATION 0x0080
+#define BFA_CEE_LLDP_SYS_CAP_CVLAN 0x0100
+#define BFA_CEE_LLDP_SYS_CAP_SVLAN 0x0200
+#define BFA_CEE_LLDP_SYS_CAP_TPMR 0x0400
+
+
+/* LLDP string type */
+struct bfa_cee_lldp_str_s {
+ u8 sub_type;
+ u8 len;
+ u8 rsvd[2];
+ u8 value[BFA_CEE_LLDP_MAX_STRING_LEN];
+};
+
+
+/* LLDP paramters */
+struct bfa_cee_lldp_cfg_s {
+ struct bfa_cee_lldp_str_s chassis_id;
+ struct bfa_cee_lldp_str_s port_id;
+ struct bfa_cee_lldp_str_s port_desc;
+ struct bfa_cee_lldp_str_s sys_name;
+ struct bfa_cee_lldp_str_s sys_desc;
+ struct bfa_cee_lldp_str_s mgmt_addr;
+ u16 time_to_interval;
+ u16 enabled_system_cap;
+};
+
+enum bfa_cee_dcbx_version_e {
+ DCBX_PROTOCOL_PRECEE = 1,
+ DCBX_PROTOCOL_CEE = 2,
+};
+
+enum bfa_cee_lls_e {
+ CEE_LLS_DOWN_NO_TLV = 0, /* LLS is down because the TLV not sent by
+ * the peer */
+ CEE_LLS_DOWN = 1, /* LLS is down as advertised by the peer */
+ CEE_LLS_UP = 2,
+};
+
+/* CEE/DCBX parameters */
+struct bfa_cee_dcbx_cfg_s {
+ u8 pgid[8];
+ u8 pg_percentage[8];
+ u8 pfc_enabled; /* bitmap of priorties with PFC enabled */
+ u8 fcoe_user_priority; /* bitmap of priorities used for FcoE
+ * traffic */
+ u8 dcbx_version; /* operating version:CEE or preCEE */
+ u8 lls_fcoe; /* FCoE Logical Link Status */
+ u8 lls_lan; /* LAN Logical Link Status */
+ u8 rsvd[3];
+};
+
+/* CEE status */
+/* Making this to tri-state for the benefit of port list command */
+enum bfa_cee_status_e {
+ CEE_PHY_DOWN = 0,
+ CEE_PHY_UP = 1,
+ CEE_UP = 2,
+};
+
+/* CEE Query */
+struct bfa_cee_attr_s {
+ u8 cee_status;
+ u8 error_reason;
+ struct bfa_cee_lldp_cfg_s lldp_remote;
+ struct bfa_cee_dcbx_cfg_s dcbx_remote;
+ mac_t src_mac;
+ u8 link_speed;
+ u8 filler[3];
+};
+
+
+
+
+/* LLDP/DCBX/CEE Statistics */
+
+struct bfa_cee_lldp_stats_s {
+ u32 frames_transmitted;
+ u32 frames_aged_out;
+ u32 frames_discarded;
+ u32 frames_in_error;
+ u32 frames_rcvd;
+ u32 tlvs_discarded;
+ u32 tlvs_unrecognized;
+};
+
+struct bfa_cee_dcbx_stats_s {
+ u32 subtlvs_unrecognized;
+ u32 negotiation_failed;
+ u32 remote_cfg_changed;
+ u32 tlvs_received;
+ u32 tlvs_invalid;
+ u32 seqno;
+ u32 ackno;
+ u32 recvd_seqno;
+ u32 recvd_ackno;
+};
+
+struct bfa_cee_cfg_stats_s {
+ u32 cee_status_down;
+ u32 cee_status_up;
+ u32 cee_hw_cfg_changed;
+ u32 recvd_invalid_cfg;
+};
+
+
+struct bfa_cee_stats_s {
+ struct bfa_cee_lldp_stats_s lldp_stats;
+ struct bfa_cee_dcbx_stats_s dcbx_stats;
+ struct bfa_cee_cfg_stats_s cfg_stats;
+};
+
+#pragma pack()
+
+
+#endif /* __BFA_DEFS_CEE_H__ */
+
+
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_driver.h patch/drivers/scsi/bfa/include/defs/bfa_defs_driver.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_driver.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_driver.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,40 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_DRIVER_H__
+#define __BFA_DEFS_DRIVER_H__
+
+/**
+ * Driver statistics
+ */
+ u16 tm_io_abort;
+ u16 tm_io_abort_comp;
+ u16 tm_lun_reset;
+ u16 tm_lun_reset_comp;
+ u16 tm_target_reset;
+ u16 tm_bus_reset;
+ u16 ioc_restart; /* IOC restart count */
+ u16 io_pending; /* outstanding io count per-IOC */
+ u64 control_req;
+ u64 input_req;
+ u64 output_req;
+ u64 input_words;
+ u64 output_words;
+} bfa_driver_stats_t;
+
+
+#endif /* __BFA_DEFS_DRIVER_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_ethport.h patch/drivers/scsi/bfa/include/defs/bfa_defs_ethport.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_ethport.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_ethport.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,98 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_ETHPORT_H__
+#define __BFA_DEFS_ETHPORT_H__
+
+#include <defs/bfa_defs_status.h>
+#include <protocol/types.h>
+#include <cna/pstats/phyport_defs.h>
+#include <cna/pstats/ethport_defs.h>
+
+struct bna_tx_info_s {
+ u32 miniport_state;
+ u32 adapter_state;
+ u64 tx_count;
+ u64 tx_wi;
+ u64 tx_sg;
+ u64 tx_tcp_chksum;
+ u64 tx_udp_chksum;
+ u64 tx_ip_chksum;
+ u64 tx_lsov1;
+ u64 tx_lsov2;
+ u64 tx_max_sg_len ;
+};
+
+struct bna_rx_queue_info_s {
+ u16 q_id ;
+ u16 buf_size ;
+ u16 buf_count ;
+ u16 rsvd ;
+ u64 rx_count ;
+ u64 rx_dropped ;
+ u64 rx_unsupported ;
+ u64 rx_internal_err ;
+ u64 rss_count ;
+ u64 vlan_count ;
+ u64 rx_tcp_chksum ;
+ u64 rx_udp_chksum ;
+ u64 rx_ip_chksum ;
+ u64 rx_hds ;
+};
+
+struct bna_rx_q_set_s {
+ u16 q_set_type;
+ u32 miniport_state;
+ u32 adapter_state;
+ struct bna_rx_queue_info_s rx_queue[2];
+};
+
+struct bna_port_stats_s {
+ struct bna_tx_info_s tx_stats;
+ u16 qset_count ;
+ struct bna_rx_q_set_s rx_qset[8];
+};
+
+struct bfa_ethport_stats_s {
+ struct bna_stats_txf txf_stats[1];
+ struct bna_stats_rxf rxf_stats[1];
+ struct bnad_drv_stats drv_stats;
+};
+
+/**
+ * Ethernet port events
+ * Arguments below are in BFAL context from Mgmt
+ * BFA_PORT_AEN_ETH_LINKUP: [in]: mac [out]: mac
+ * BFA_PORT_AEN_ETH_LINKDOWN: [in]: mac [out]: mac
+ * BFA_PORT_AEN_ETH_ENABLE: [in]: mac [out]: mac
+ * BFA_PORT_AEN_ETH_DISABLE: [in]: mac [out]: mac
+ *
+ */
+enum bfa_ethport_aen_event {
+ BFA_ETHPORT_AEN_LINKUP = 1, /* Base Port Ethernet link up event */
+ BFA_ETHPORT_AEN_LINKDOWN = 2, /* Base Port Ethernet link down event */
+ BFA_ETHPORT_AEN_ENABLE = 3, /* Base Port Ethernet link enable event */
+ BFA_ETHPORT_AEN_DISABLE = 4, /* Base Port Ethernet link disable
+ * event */
+};
+
+struct bfa_ethport_aen_data_s {
+ mac_t mac; /* MAC address of the physical port */
+};
+
+
+#endif /* __BFA_DEFS_ETHPORT_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_fcpim.h patch/drivers/scsi/bfa/include/defs/bfa_defs_fcpim.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_fcpim.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_fcpim.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,45 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_FCPIM_H__
+#define __BFA_DEFS_FCPIM_H__
+
+struct bfa_fcpim_stats_s {
+ u32 total_ios; /* Total IO count */
+ u32 qresumes; /* IO waiting for CQ space */
+ u32 no_iotags; /* NO IO contexts */
+ u32 io_aborts; /* IO abort requests */
+ u32 no_tskims; /* NO task management contexts */
+ u32 iocomp_ok; /* IO completions with OK status */
+ u32 iocomp_underrun; /* IO underrun (good) */
+ u32 iocomp_overrun; /* IO overrun (good) */
+ u32 iocomp_aborted; /* Aborted IO requests */
+ u32 iocomp_timedout; /* IO timeouts */
+ u32 iocom_nexus_abort; /* IO selection timeouts */
+ u32 iocom_proto_err; /* IO protocol errors */
+ u32 iocom_dif_err; /* IO SBC-3 protection errors */
+ u32 iocom_tm_abort; /* IO aborted by TM requests */
+ u32 iocom_sqer_needed; /* IO retry for SQ error
+ *recovery */
+ u32 iocom_res_free; /* Delayed freeing of IO resources */
+ u32 iocomp_scsierr; /* IO with non-good SCSI status */
+ u32 iocom_hostabrts; /* Host IO abort requests */
+ u32 iocom_utags; /* IO comp with unknown tags */
+ u32 io_cleanups; /* IO implicitly aborted */
+ u32 io_tmaborts; /* IO aborted due to TM commands */
+ u32 rsvd;
+};
+#endif /*__BFA_DEFS_FCPIM_H__*/
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_im_common.h patch/drivers/scsi/bfa/include/defs/bfa_defs_im_common.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_im_common.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_im_common.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_IM_COMMON_H__
+#define __BFA_DEFS_IM_COMMON_H__
+
+#define BFA_ADAPTER_NAME_LEN 256
+#define BFA_ADAPTER_GUID_LEN 256
+#define RESERVED_VLAN_NAME L"PORT VLAN"
+#define PASSTHRU_VLAN_NAME L"PASSTHRU VLAN"
+
+ u64 tx_pkt_cnt;
+ u64 rx_pkt_cnt;
+ u32 duration;
+ u8 status;
+} bfa_im_stats_t, *pbfa_im_stats_t;
+
+#endif /* __BFA_DEFS_IM_COMMON_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_im_team.h patch/drivers/scsi/bfa/include/defs/bfa_defs_im_team.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_im_team.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_im_team.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,72 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_IM_TEAM_H__
+#define __BFA_DEFS_IM_TEAM_H__
+
+#include <protocol/types.h>
+
+#define BFA_TEAM_MAX_PORTS 8
+#define BFA_TEAM_NAME_LEN 256
+#define BFA_MAX_NUM_TEAMS 16
+#define BFA_TEAM_INVALID_DELAY -1
+
+ BFA_LACP_RATE_SLOW = 1,
+ BFA_LACP_RATE_FAST
+} bfa_im_lacp_rate_t;
+
+ BFA_TEAM_MODE_FAIL_OVER = 1,
+ BFA_TEAM_MODE_FAIL_BACK,
+ BFA_TEAM_MODE_LACP,
+ BFA_TEAM_MODE_NONE
+} bfa_im_team_mode_t;
+
+ BFA_XMIT_POLICY_L2 = 1,
+ BFA_XMIT_POLICY_L3_L4
+} bfa_im_xmit_policy_t;
+
+ bfa_im_team_mode_t team_mode;
+ bfa_im_lacp_rate_t lacp_rate;
+ bfa_im_xmit_policy_t xmit_policy;
+ int delay;
+ wchar_t primary[BFA_ADAPTER_NAME_LEN];
+ wchar_t preferred_primary[BFA_ADAPTER_NAME_LEN];
+ mac_t mac;
+ u16 num_ports;
+ u16 num_vlans;
+ u16 vlan_list[BFA_MAX_VLANS_PER_PORT];
+ wchar_t team_guid_list[BFA_TEAM_MAX_PORTS][BFA_ADAPTER_GUID_LEN];
+ wchar_t ioc_name_list[BFA_TEAM_MAX_PORTS][BFA_ADAPTER_NAME_LEN];
+} bfa_im_team_attr_t;
+
+ wchar_t team_name[BFA_TEAM_NAME_LEN];
+ bfa_im_xmit_policy_t xmit_policy;
+ int delay;
+ wchar_t primary[BFA_ADAPTER_NAME_LEN];
+ wchar_t preferred_primary[BFA_ADAPTER_NAME_LEN];
+} bfa_im_team_edit_t, *pbfa_im_team_edit_t;
+
+ wchar_t team_name[BFA_TEAM_NAME_LEN];
+ bfa_im_team_mode_t team_mode;
+ mac_t mac;
+} bfa_im_team_info_t;
+
+ bfa_im_team_info_t team_info[BFA_MAX_NUM_TEAMS];
+ u16 num_teams;
+} bfa_im_team_list_t, *pbfa_im_team_list_t;
+
+#endif /* __BFA_DEFS_IM_TEAM_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_ioc.h patch/drivers/scsi/bfa/include/defs/bfa_defs_ioc.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_ioc.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_ioc.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,152 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_IOC_H__
+#define __BFA_DEFS_IOC_H__
+
+#include <protocol/types.h>
+#include <defs/bfa_defs_types.h>
+#include <defs/bfa_defs_version.h>
+#include <defs/bfa_defs_adapter.h>
+#include <defs/bfa_defs_pm.h>
+
+enum {
+ BFA_IOC_DRIVER_LEN = 16,
+ BFA_IOC_CHIP_REV_LEN = 8,
+};
+
+/**
+ * Driver and firmware versions.
+ */
+struct bfa_ioc_driver_attr_s {
+ char driver[BFA_IOC_DRIVER_LEN]; /* driver name */
+ char driver_ver[BFA_VERSION_LEN]; /* driver version */
+ char fw_ver[BFA_VERSION_LEN]; /* firmware version*/
+ char bios_ver[BFA_VERSION_LEN]; /* bios version */
+ char efi_ver[BFA_VERSION_LEN]; /* EFI version */
+ char ob_ver[BFA_VERSION_LEN]; /* openboot version*/
+};
+
+/**
+ * IOC PCI device attributes
+ */
+struct bfa_ioc_pci_attr_s {
+ u16 vendor_id; /* PCI vendor ID */
+ u16 device_id; /* PCI device ID */
+ u16 ssid; /* subsystem ID */
+ u16 ssvid; /* subsystem vendor ID */
+ u32 pcifn; /* PCI device function */
+ u32 rsvd; /* padding */
+ u8 chip_rev[BFA_IOC_CHIP_REV_LEN]; /* chip revision */
+};
+
+/**
+ * IOC states
+ */
+enum bfa_ioc_state {
+ BFA_IOC_RESET = 1, /* IOC is in reset state */
+ BFA_IOC_SEMWAIT = 2, /* Waiting for IOC hardware semaphore */
+ BFA_IOC_HWINIT = 3, /* IOC hardware is being initialized */
+ BFA_IOC_GETATTR = 4, /* IOC is being configured */
+ BFA_IOC_OPERATIONAL = 5, /* IOC is operational */
+ BFA_IOC_INITFAIL = 6, /* IOC hardware failure */
+ BFA_IOC_HBFAIL = 7, /* IOC heart-beat failure */
+ BFA_IOC_DISABLING = 8, /* IOC is being disabled */
+ BFA_IOC_DISABLED = 9, /* IOC is disabled */
+ BFA_IOC_FWMISMATCH = 10, /* IOC firmware different from drivers */
+};
+
+/**
+ * IOC firmware stats
+ */
+struct bfa_fw_ioc_stats_s {
+ u32 hb_count;
+ u32 cfg_reqs;
+ u32 enable_reqs;
+ u32 disable_reqs;
+ u32 stats_reqs;
+ u32 clrstats_reqs;
+ u32 unknown_reqs;
+ u32 ic_reqs; /* interrupt coalesce reqs */
+};
+
+/**
+ * IOC driver stats
+ */
+struct bfa_ioc_drv_stats_s {
+ u32 ioc_isrs;
+ u32 ioc_enables;
+ u32 ioc_disables;
+ u32 ioc_hbfails;
+ u32 ioc_boots;
+ u32 stats_tmos;
+ u32 hb_count;
+ u32 disable_reqs;
+ u32 enable_reqs;
+ u32 disable_replies;
+ u32 enable_replies;
+};
+
+/**
+ * IOC statistics
+ */
+struct bfa_ioc_stats_s {
+ struct bfa_ioc_drv_stats_s drv_stats; /* driver IOC stats */
+ struct bfa_fw_ioc_stats_s fw_stats; /* firmware IOC stats */
+};
+
+
+enum bfa_ioc_type_e {
+ BFA_IOC_TYPE_FC = 1,
+ BFA_IOC_TYPE_FCoE = 2,
+ BFA_IOC_TYPE_LL = 3,
+};
+
+/**
+ * IOC attributes returned in queries
+ */
+struct bfa_ioc_attr_s {
+ enum bfa_ioc_type_e ioc_type;
+ enum bfa_ioc_state state; /* IOC state */
+ struct bfa_adapter_attr_s adapter_attr; /* HBA attributes */
+ struct bfa_ioc_driver_attr_s driver_attr; /* driver attr */
+ struct bfa_ioc_pci_attr_s pci_attr;
+ u8 port_id; /* port number */
+};
+
+/**
+ * BFA IOC level events
+ */
+enum bfa_ioc_aen_event {
+ BFA_IOC_AEN_HBGOOD = 1, /* Heart Beat restore event */
+ BFA_IOC_AEN_HBFAIL = 2, /* Heart Beat failure event */
+ BFA_IOC_AEN_ENABLE = 3, /* IOC enabled event */
+ BFA_IOC_AEN_DISABLE = 4, /* IOC disabled event */
+ BFA_IOC_AEN_FWMISMATCH = 5, /* IOC firmware mismatch */
+};
+
+/**
+ * BFA IOC level event data, now just a place holder
+ */
+struct bfa_ioc_aen_data_s {
+ enum bfa_ioc_type_e ioc_type;
+ wwn_t pwwn;
+ mac_t mac;
+};
+
+#endif /* __BFA_DEFS_IOC_H__ */
+
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_iocfc.h patch/drivers/scsi/bfa/include/defs/bfa_defs_iocfc.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_iocfc.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_iocfc.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,310 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_IOCFC_H__
+#define __BFA_DEFS_IOCFC_H__
+
+#include <protocol/types.h>
+#include <defs/bfa_defs_types.h>
+#include <defs/bfa_defs_version.h>
+#include <defs/bfa_defs_adapter.h>
+#include <defs/bfa_defs_pm.h>
+
+#define BFA_IOCFC_INTR_DELAY 1125
+#define BFA_IOCFC_INTR_LATENCY 225
+
+/**
+ * Interrupt coalescing configuration.
+ */
+struct bfa_iocfc_intr_attr_s {
+ bfa_boolean_t coalesce; /* enable/disable coalescing */
+ u16 latency; /* latency in microseconds */
+ u16 delay; /* delay in microseconds */
+};
+
+/**
+ * IOC firmware configuraton
+ */
+struct bfa_iocfc_fwcfg_s {
+ u16 num_fabrics; /* number of fabrics */
+ u16 num_lports; /* number of local lports */
+ u16 num_rports; /* number of remote ports */
+ u16 num_ioim_reqs; /* number of IO reqs */
+ u16 num_tskim_reqs; /* task management requests */
+ u16 num_iotm_reqs; /* number of TM IO reqs */
+ u16 num_tsktm_reqs; /* TM task management requests*/
+ u16 num_fcxp_reqs; /* unassisted FC exchanges */
+ u16 num_uf_bufs; /* unsolicited recv buffers */
+ u8 num_cqs;
+ u8 rsvd;
+};
+
+struct bfa_iocfc_drvcfg_s {
+ u16 num_reqq_elems; /* number of req queue elements */
+ u16 num_rspq_elems; /* number of rsp queue elements */
+ u16 num_sgpgs; /* number of total SG pages */
+ u16 num_sboot_tgts; /* number of SAN boot targets */
+ u16 num_sboot_luns; /* number of SAN boot luns */
+ u16 ioc_recover; /* IOC recovery mode */
+ u16 min_cfg; /* minimum configuration */
+ u16 path_tov; /* device path timeout */
+ bfa_boolean_t delay_comp; /* delay completion of
+ failed inflight IOs */
+ u32 rsvd;
+};
+/**
+ * IOC configuration
+ */
+struct bfa_iocfc_cfg_s {
+ struct bfa_iocfc_fwcfg_s fwcfg; /* firmware side config */
+ struct bfa_iocfc_drvcfg_s drvcfg; /* driver side config */
+};
+
+/**
+ * IOC firmware IO stats
+ */
+struct bfa_fw_io_stats_s {
+ u32 host_abort; /* IO aborted by host driver*/
+ u32 host_cleanup; /* IO clean up by host driver */
+
+ u32 fw_io_timeout; /* IOs timedout */
+ u32 fw_frm_parse; /* frame parsed by f/w */
+ u32 fw_frm_data; /* fcp_data frame parsed by f/w */
+ u32 fw_frm_rsp; /* fcp_rsp frame parsed by f/w */
+ u32 fw_frm_xfer_rdy; /* xfer_rdy frame parsed by f/w */
+ u32 fw_frm_bls_acc; /* BLS ACC frame parsed by f/w */
+ u32 fw_frm_tgt_abort; /* target ABTS parsed by f/w */
+ u32 fw_frm_unknown; /* unknown parsed by f/w */
+ u32 fw_data_dma; /* f/w DMA'ed the data frame */
+ u32 fw_frm_drop; /* f/w drop the frame */
+
+ u32 rec_timeout; /* FW rec timed out */
+ u32 error_rec; /* FW sending rec on
+ * an error condition*/
+ u32 wait_for_si; /* FW wait for SI */
+ u32 rec_rsp_inval; /* REC rsp invalid */
+ u32 seqr_io_abort; /* target does not know cmd so abort */
+ u32 seqr_io_retry; /* SEQR failed so retry IO */
+
+ u32 itn_cisc_upd_rsp; /* ITN cisc updated on fcp_rsp */
+ u32 itn_cisc_upd_data; /* ITN cisc updated on fcp_data */
+ u32 itn_cisc_upd_xfer_rdy; /* ITN cisc updated on fcp_data */
+
+ u32 fcp_data_lost; /* fcp data lost */
+
+ u32 ro_set_in_xfer_rdy; /* Target set RO in Xfer_rdy frame */
+ u32 xfer_rdy_ooo_err; /* Out of order Xfer_rdy received */
+ u32 xfer_rdy_unknown_err; /* unknown error in xfer_rdy frame */
+
+ u32 io_abort_timeout; /* ABTS timedout */
+ u32 sler_initiated; /* SLER initiated */
+
+ u32 unexp_fcp_rsp; /* fcp response in wrong state */
+
+ u32 fcp_rsp_under_run; /* fcp rsp IO underrun */
+ u32 fcp_rsp_under_run_wr; /* fcp rsp IO underrun for write */
+ u32 fcp_rsp_under_run_err; /* fcp rsp IO underrun error */
+ u32 fcp_rsp_resid_inval; /* invalid residue */
+ u32 fcp_rsp_over_run; /* fcp rsp IO overrun */
+ u32 fcp_rsp_over_run_err; /* fcp rsp IO overrun error */
+ u32 fcp_rsp_proto_err; /* protocol error in fcp rsp */
+ u32 fcp_rsp_sense_err; /* error in sense info in fcp rsp */
+ u32 fcp_conf_req; /* FCP conf requested */
+
+ u32 tgt_aborted_io; /* target initiated abort */
+
+ u32 ioh_edtov_timeout_event;/* IOH edtov timer popped */
+ u32 ioh_fcp_rsp_excp_event; /* IOH FCP_RSP exception */
+ u32 ioh_fcp_conf_event; /* IOH FCP_CONF */
+ u32 ioh_mult_frm_rsp_event; /* IOH multi_frame FCP_RSP */
+ u32 ioh_hit_class2_event; /* IOH hit class2 */
+ u32 ioh_miss_other_event; /* IOH miss other */
+ u32 ioh_seq_cnt_err_event; /* IOH seq cnt error */
+ u32 ioh_len_err_event; /* IOH len error - fcp_dl !=
+ * bytes xfered */
+ u32 ioh_seq_len_err_event; /* IOH seq len error */
+ u32 ioh_data_oor_event; /* Data out of range */
+ u32 ioh_ro_ooo_event; /* Relative offset out of range */
+ u32 ioh_cpu_owned_event; /* IOH hit -iost owned by f/w */
+ u32 ioh_unexp_frame_event; /* unexpected frame recieved
+ * count */
+ u32 ioh_err_int; /* IOH error int during data-phase
+ * for scsi write
+ */
+};
+
+/**
+ * IOC port firmware stats
+ */
+
+struct bfa_fw_port_fpg_stats_s {
+ u32 intr_evt;
+ u32 intr;
+ u32 intr_excess;
+ u32 intr_cause0;
+ u32 intr_other;
+ u32 intr_other_ign;
+ u32 sig_lost;
+ u32 sig_regained;
+ u32 sync_lost;
+ u32 sync_to;
+ u32 sync_regained;
+ u32 div2_overflow;
+ u32 div2_underflow;
+ u32 efifo_overflow;
+ u32 efifo_underflow;
+ u32 idle_rx;
+ u32 lrr_rx;
+ u32 lr_rx;
+ u32 ols_rx;
+ u32 nos_rx;
+ u32 lip_rx;
+ u32 arbf0_rx;
+ u32 mrk_rx;
+ u32 const_mrk_rx;
+ u32 prim_unknown;
+ u32 rsvd;
+};
+
+
+struct bfa_fw_port_lksm_stats_s {
+ u32 hwsm_success; /* hwsm state machine success */
+ u32 hwsm_fails; /* hwsm fails */
+ u32 hwsm_wdtov; /* hwsm timed out */
+ u32 swsm_success; /* swsm success */
+ u32 swsm_fails; /* swsm fails */
+ u32 swsm_wdtov; /* swsm timed out */
+ u32 busybufs; /* link init failed due to busybuf */
+ u32 buf_waits; /* bufwait state entries */
+ u32 link_fails; /* link failures */
+ u32 psp_errors; /* primitive sequence protocol errors */
+ u32 lr_unexp; /* No. of times LR rx-ed unexpectedly */
+ u32 lrr_unexp; /* No. of times LRR rx-ed unexpectedly */
+ u32 lr_tx; /* No. of times LR tx started */
+ u32 lrr_tx; /* No. of times LRR tx started */
+ u32 ols_tx; /* No. of times OLS tx started */
+ u32 nos_tx; /* No. of times NOS tx started */
+};
+
+
+struct bfa_fw_port_snsm_stats_s {
+ u32 hwsm_success; /* Successful hwsm terminations */
+ u32 hwsm_fails; /* hwsm fail count */
+ u32 hwsm_wdtov; /* hwsm timed out */
+ u32 swsm_success; /* swsm success */
+ u32 swsm_wdtov; /* swsm timed out */
+ u32 error_resets; /* error resets initiated by upsm */
+ u32 sync_lost; /* Sync loss count */
+ u32 sig_lost; /* Signal loss count */
+};
+
+
+struct bfa_fw_port_physm_stats_s {
+ u32 module_inserts; /* Module insert count */
+ u32 module_xtracts; /* Module extracts count */
+ u32 module_invalids; /* Invalid module inserted count */
+ u32 module_read_ign; /* Module validation status ignored */
+ u32 laser_faults; /* Laser fault count */
+ u32 rsvd;
+};
+
+
+struct bfa_fw_fip_stats_s {
+ u32 disc_req; /* Discovery solicit requests */
+ u32 disc_rsp; /* Discovery solicit response */
+ u32 disc_err; /* Discovery advt. parse errors */
+ u32 disc_unsol; /* Discovery unsolicited */
+ u32 disc_timeouts; /* Discovery timeouts */
+ u32 linksvc_unsupp; /* Unsupported link service req */
+ u32 linksvc_err; /* Parse error in link service req */
+ u32 logo_req; /* Number of FIP logos received */
+ u32 clrvlink_req; /* Clear virtual link req */
+ u32 op_unsupp; /* Unsupported FIP operation */
+ u32 untagged; /* Untagged frames (ignored) */
+ u32 rsvd;
+};
+
+
+struct bfa_fw_lps_stats_s {
+ u32 mac_invalids; /* Invalid mac assigned */
+ u32 rsvd;
+};
+
+
+struct bfa_fw_fcoe_stats_s {
+ u32 cee_linkups; /* CEE link up count */
+ u32 cee_linkdns; /* CEE link down count */
+ u32 fip_linkups; /* FIP link up count */
+ u32 fip_linkdns; /* FIP link up count */
+ u32 fip_fails; /* FIP fail count */
+ u32 mac_invalids; /* Invalid mac assigned */
+};
+
+/**
+ * IOC firmware FCoE port stats
+ */
+struct bfa_fw_fcoe_port_stats_s {
+ struct bfa_fw_fcoe_stats_s fcoe_stats;
+ struct bfa_fw_fip_stats_s fip_stats;
+};
+
+/**
+ * IOC firmware FC port stats
+ */
+struct bfa_fw_fc_port_stats_s {
+ struct bfa_fw_port_fpg_stats_s fpg_stats;
+ struct bfa_fw_port_physm_stats_s physm_stats;
+ struct bfa_fw_port_snsm_stats_s snsm_stats;
+ struct bfa_fw_port_lksm_stats_s lksm_stats;
+};
+
+/**
+ * IOC firmware FC port stats
+ */
+union bfa_fw_port_stats_s {
+ struct bfa_fw_fc_port_stats_s fc_stats;
+ struct bfa_fw_fcoe_port_stats_s fcoe_stats;
+};
+
+/**
+ * IOC firmware stats
+ */
+struct bfa_fw_stats_s {
+ struct bfa_fw_ioc_stats_s ioc_stats;
+ struct bfa_fw_io_stats_s io_stats;
+ union bfa_fw_port_stats_s port_stats;
+};
+
+/**
+ * IOC statistics
+ */
+struct bfa_iocfc_stats_s {
+ struct bfa_fw_stats_s fw_stats; /* firmware IOC stats */
+};
+
+/**
+ * IOC attributes returned in queries
+ */
+struct bfa_iocfc_attr_s {
+ struct bfa_iocfc_cfg_s config; /* IOCFC config */
+ struct bfa_iocfc_intr_attr_s intr_attr; /* interrupt attr */
+};
+
+#define BFA_IOCFC_PATHTOV_MAX 60
+#define BFA_IOCFC_QDEPTH_MAX 2000
+
+#endif /* __BFA_DEFS_IOC_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_ipfc.h patch/drivers/scsi/bfa/include/defs/bfa_defs_ipfc.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_ipfc.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_ipfc.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,70 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_IPFC_H__
+#define __BFA_DEFS_IPFC_H__
+
+#include <bfa_os_inc.h>
+#include <protocol/types.h>
+#include <defs/bfa_defs_types.h>
+
+/**
+ * FCS ip remote port states
+ */
+enum bfa_iprp_state {
+ BFA_IPRP_UNINIT = 0, /* PORT is not yet initialized */
+ BFA_IPRP_ONLINE = 1, /* process login is complete */
+ BFA_IPRP_OFFLINE = 2, /* iprp is offline */
+};
+
+/**
+ * FCS remote port statistics
+ */
+struct bfa_iprp_stats_s {
+ u32 offlines;
+ u32 onlines;
+ u32 rscns;
+ u32 plogis;
+ u32 logos;
+ u32 plogi_timeouts;
+ u32 plogi_rejects;
+};
+
+/**
+ * FCS iprp attribute returned in queries
+ */
+struct bfa_iprp_attr_s {
+ enum bfa_iprp_state state;
+};
+
+struct bfa_ipfc_stats_s {
+ u32 arp_sent;
+ u32 arp_recv;
+ u32 arp_reply_sent;
+ u32 arp_reply_recv;
+ u32 farp_sent;
+ u32 farp_recv;
+ u32 farp_reply_sent;
+ u32 farp_reply_recv;
+ u32 farp_reject_sent;
+ u32 farp_reject_recv;
+};
+
+struct bfa_ipfc_attr_s {
+ bfa_boolean_t enabled;
+};
+
+#endif /* __BFA_DEFS_IPFC_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_itnim.h patch/drivers/scsi/bfa/include/defs/bfa_defs_itnim.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_itnim.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_itnim.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,126 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_ITNIM_H__
+#define __BFA_DEFS_ITNIM_H__
+
+#include <bfa_os_inc.h>
+#include <protocol/types.h>
+
+/**
+ * FCS itnim states
+ */
+enum bfa_itnim_state {
+ BFA_ITNIM_OFFLINE = 0, /* offline */
+ BFA_ITNIM_PRLI_SEND = 1, /* prli send */
+ BFA_ITNIM_PRLI_SENT = 2, /* prli sent */
+ BFA_ITNIM_PRLI_RETRY = 3, /* prli retry */
+ BFA_ITNIM_HCB_ONLINE = 4, /* online callback */
+ BFA_ITNIM_ONLINE = 5, /* online */
+ BFA_ITNIM_HCB_OFFLINE = 6, /* offline callback */
+ BFA_ITNIM_INITIATIOR = 7, /* initiator */
+};
+
+struct bfa_itnim_hal_stats_s {
+ u32 onlines; /* ITN nexus onlines (PRLI done) */
+ u32 offlines; /* ITN Nexus offlines */
+ u32 creates; /* ITN create requests */
+ u32 deletes; /* ITN delete requests */
+ u32 create_comps; /* ITN create completions */
+ u32 delete_comps; /* ITN delete completions */
+ u32 sler_events; /* SLER (sequence level error
+ * recovery) events */
+ u32 ioc_disabled; /* Num IOC disables */
+ u32 cleanup_comps; /* ITN cleanup completions */
+ u32 tm_cmnds; /* task management(TM) cmnds sent */
+ u32 tm_fw_rsps; /* TM cmds firmware responses */
+ u32 tm_success; /* TM successes */
+ u32 tm_failures; /* TM failures */
+ u32 tm_io_comps; /* TM IO completions */
+ u32 tm_qresumes; /* TM queue resumes (after waiting
+ * for resources)
+ */
+ u32 tm_iocdowns; /* TM cmnds affected by IOC down */
+ u32 tm_cleanups; /* TM cleanups */
+ u32 tm_cleanup_comps;
+ /* TM cleanup completions */
+ u32 ios; /* IO requests */
+ u32 io_comps; /* IO completions */
+ u64 input_reqs; /* INPUT requests */
+ u64 output_reqs; /* OUTPUT requests */
+};
+
+/**
+ * FCS remote port statistics
+ */
+struct bfa_itnim_stats_s {
+ u32 onlines; /* num rport online */
+ u32 offlines; /* num rport offline */
+ u32 prli_sent; /* num prli sent out */
+ u32 fcxp_alloc_wait;/* num fcxp alloc waits */
+ u32 prli_rsp_err; /* num prli rsp errors */
+ u32 prli_rsp_acc; /* num prli rsp accepts */
+ u32 initiator; /* rport is an initiator */
+ u32 prli_rsp_parse_err; /* prli rsp parsing errors */
+ u32 prli_rsp_rjt; /* num prli rsp rejects */
+ u32 timeout; /* num timeouts detected */
+ u32 sler; /* num sler notification from BFA */
+ u32 rsvd;
+ struct bfa_itnim_hal_stats_s hal_stats;
+};
+
+/**
+ * FCS itnim attributes returned in queries
+ */
+struct bfa_itnim_attr_s {
+ enum bfa_itnim_state state; /* FCS itnim state */
+ u8 retry; /* data retransmision support */
+ u8 task_retry_id; /* task retry ident support */
+ u8 rec_support; /* REC supported */
+ u8 conf_comp; /* confirmed completion supp */
+};
+
+/**
+ * BFA ITNIM events.
+ * Arguments below are in BFAL context from Mgmt
+ * BFA_ITNIM_AEN_NEW: [in]: None [out]: vf_id, lpwwn
+ * BFA_ITNIM_AEN_DELETE: [in]: vf_id, lpwwn, rpwwn (0 = all fcp4 targets),
+ * [out]: vf_id, ppwwn, lpwwn, rpwwn
+ * BFA_ITNIM_AEN_ONLINE: [in]: vf_id, lpwwn, rpwwn (0 = all fcp4 targets),
+ * [out]: vf_id, ppwwn, lpwwn, rpwwn
+ * BFA_ITNIM_AEN_OFFLINE: [in]: vf_id, lpwwn, rpwwn (0 = all fcp4 targets),
+ * [out]: vf_id, ppwwn, lpwwn, rpwwn
+ * BFA_ITNIM_AEN_DISCONNECT:[in]: vf_id, lpwwn, rpwwn (0 = all fcp4 targets),
+ * [out]: vf_id, ppwwn, lpwwn, rpwwn
+ */
+enum bfa_itnim_aen_event {
+ BFA_ITNIM_AEN_ONLINE = 1, /* Target online */
+ BFA_ITNIM_AEN_OFFLINE = 2, /* Target offline */
+ BFA_ITNIM_AEN_DISCONNECT = 3, /* Target disconnected */
+};
+
+/**
+ * BFA ITNIM event data structure.
+ */
+struct bfa_itnim_aen_data_s {
+ u16 vf_id; /* vf_id of the IT nexus */
+ u16 rsvd[3];
+ wwn_t ppwwn; /* WWN of its physical port */
+ wwn_t lpwwn; /* WWN of logical port */
+ wwn_t rpwwn; /* WWN of remote(target) port */
+};
+
+#endif /* __BFA_DEFS_ITNIM_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_led.h patch/drivers/scsi/bfa/include/defs/bfa_defs_led.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_led.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_led.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_LED_H__
+#define __BFA_DEFS_LED_H__
+
+#define BFA_LED_MAX_NUM 3
+
+enum bfa_led_op {
+ BFA_LED_OFF = 0,
+ BFA_LED_ON = 1,
+ BFA_LED_FLICK = 2,
+ BFA_LED_BLINK = 3,
+};
+
+enum bfa_led_color {
+ BFA_LED_GREEN = 0,
+ BFA_LED_AMBER = 1,
+};
+
+#endif /* __BFA_DEFS_LED_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_lport.h patch/drivers/scsi/bfa/include/defs/bfa_defs_lport.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_lport.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_lport.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,68 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_LPORT_H__
+#define __BFA_DEFS_LPORT_H__
+
+#include <defs/bfa_defs_types.h>
+#include <defs/bfa_defs_port.h>
+
+/**
+ * BFA AEN logical port events.
+ * Arguments below are in BFAL context from Mgmt
+ * BFA_LPORT_AEN_NEW: [in]: None [out]: vf_id, ppwwn, lpwwn, roles
+ * BFA_LPORT_AEN_DELETE: [in]: lpwwn [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_ONLINE: [in]: lpwwn [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_OFFLINE: [in]: lpwwn [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_DISCONNECT:[in]: lpwwn [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_NEW_PROP: [in]: None [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_DELETE_PROP: [in]: lpwwn [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_NEW_STANDARD: [in]: None [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_DELETE_STANDARD: [in]: lpwwn [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_NPIV_DUP_WWN: [in]: lpwwn [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_NPIV_FABRIC_MAX: [in]: lpwwn [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_NPIV_UNKNOWN: [in]: lpwwn [out]: vf_id, ppwwn. lpwwn, roles
+ */
+enum bfa_lport_aen_event {
+ BFA_LPORT_AEN_NEW = 1, /* LPort created event */
+ BFA_LPORT_AEN_DELETE = 2, /* LPort deleted event */
+ BFA_LPORT_AEN_ONLINE = 3, /* LPort online event */
+ BFA_LPORT_AEN_OFFLINE = 4, /* LPort offline event */
+ BFA_LPORT_AEN_DISCONNECT = 5, /* LPort disconnect event */
+ BFA_LPORT_AEN_NEW_PROP = 6, /* VPort created event */
+ BFA_LPORT_AEN_DELETE_PROP = 7, /* VPort deleted event */
+ BFA_LPORT_AEN_NEW_STANDARD = 8, /* VPort created event */
+ BFA_LPORT_AEN_DELETE_STANDARD = 9, /* VPort deleted event */
+ BFA_LPORT_AEN_NPIV_DUP_WWN = 10, /* VPort configured with
+ * duplicate WWN event
+ */
+ BFA_LPORT_AEN_NPIV_FABRIC_MAX = 11, /* Max NPIV in fabric/fport */
+ BFA_LPORT_AEN_NPIV_UNKNOWN = 12, /* Unknown NPIV Error code event */
+};
+
+/**
+ * BFA AEN event data structure
+ */
+struct bfa_lport_aen_data_s {
+ u16 vf_id; /* vf_id of this logical port */
+ u16 rsvd;
+ enum bfa_port_role roles; /* Logical port mode,IM/TM/IP etc */
+ wwn_t ppwwn; /* WWN of its physical port */
+ wwn_t lpwwn; /* WWN of this logical port */
+};
+
+#endif /* __BFA_DEFS_LPORT_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_mfg.h patch/drivers/scsi/bfa/include/defs/bfa_defs_mfg.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_mfg.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_mfg.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_MFG_H__
+#define __BFA_DEFS_MFG_H__
+
+#include <bfa_os_inc.h>
+
+/**
+ * Manufacturing block version
+ */
+#define BFA_MFG_VERSION 1
+
+/**
+ * Manufacturing block format
+ */
+#define BFA_MFG_SERIALNUM_SIZE 11
+#define BFA_MFG_PARTNUM_SIZE 14
+#define BFA_MFG_SUPPLIER_ID_SIZE 10
+#define BFA_MFG_SUPPLIER_PARTNUM_SIZE 20
+#define BFA_MFG_SUPPLIER_SERIALNUM_SIZE 20
+#define BFA_MFG_SUPPLIER_REVISION_SIZE 4
+#define STRSZ(_n) (((_n) + 4) & ~3)
+
+/**
+ * VPD data length
+ */
+#define BFA_MFG_VPD_LEN 256
+
+/**
+ * All numerical fields are in big-endian format.
+ */
+struct bfa_mfg_vpd_s {
+ u8 version; /* vpd data version */
+ u8 vpd_sig[3]; /* characters 'V', 'P', 'D' */
+ u8 chksum; /* u8 checksum */
+ u8 vendor; /* vendor */
+ u8 len; /* vpd data length excluding header */
+ u8 rsv;
+ u8 data[BFA_MFG_VPD_LEN]; /* vpd data */
+};
+
+#pragma pack(1)
+
+#endif /* __BFA_DEFS_MFG_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_pci.h patch/drivers/scsi/bfa/include/defs/bfa_defs_pci.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_pci.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_pci.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,41 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_PCI_H__
+#define __BFA_DEFS_PCI_H__
+
+/**
+ * PCI device and vendor ID information
+ */
+enum {
+ BFA_PCI_VENDOR_ID_BROCADE = 0x1657,
+ BFA_PCI_DEVICE_ID_FC_8G2P = 0x13,
+ BFA_PCI_DEVICE_ID_FC_8G1P = 0x17,
+ BFA_PCI_DEVICE_ID_CT = 0x14,
+};
+
+/**
+ * PCI sub-system device and vendor ID information
+ */
+enum {
+ BFA_PCI_FCOE_SSDEVICE_ID = 0x14,
+};
+
+#define BFA_PCI_ACCESS_RANGES 1 /* Maximum number of device address ranges
+ * mapped through different BAR(s). */
+
+#endif /* __BFA_DEFS_PCI_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_pm.h patch/drivers/scsi/bfa/include/defs/bfa_defs_pm.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_pm.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_pm.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,33 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_PM_H__
+#define __BFA_DEFS_PM_H__
+
+#include <bfa_os_inc.h>
+
+/**
+ * BFA power management device states
+ */
+enum bfa_pm_ds {
+ BFA_PM_DS_D0 = 0, /* full power mode */
+ BFA_PM_DS_D1 = 1, /* power save state 1 */
+ BFA_PM_DS_D2 = 2, /* power save state 2 */
+ BFA_PM_DS_D3 = 3, /* power off state */
+};
+
+#endif /* __BFA_DEFS_PM_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_pom.h patch/drivers/scsi/bfa/include/defs/bfa_defs_pom.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_pom.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_pom.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,56 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_POM_H__
+#define __BFA_DEFS_POM_H__
+
+#include <bfa_os_inc.h>
+#include <defs/bfa_defs_types.h>
+
+/**
+ * POM health status levels for each attributes.
+ */
+enum bfa_pom_entry_health {
+ BFA_POM_HEALTH_NOINFO = 1, /* no information */
+ BFA_POM_HEALTH_NORMAL = 2, /* health is normal */
+ BFA_POM_HEALTH_WARNING = 3, /* warning level */
+ BFA_POM_HEALTH_ALARM = 4, /* alarming level */
+};
+
+/**
+ * Reading of temperature/voltage/current/power
+ */
+struct bfa_pom_entry_s {
+ enum bfa_pom_entry_health health; /* POM entry health */
+ u32 curr_value; /* current value */
+ u32 thr_warn_high; /* threshold warning high */
+ u32 thr_warn_low; /* threshold warning low */
+ u32 thr_alarm_low; /* threshold alaram low */
+ u32 thr_alarm_high; /* threshold alarm high */
+};
+
+/**
+ * POM attributes
+ */
+struct bfa_pom_attr_s {
+ struct bfa_pom_entry_s temperature; /* centigrade */
+ struct bfa_pom_entry_s voltage; /* volts */
+ struct bfa_pom_entry_s curr; /* milli amps */
+ struct bfa_pom_entry_s txpower; /* micro watts */
+ struct bfa_pom_entry_s rxpower; /* micro watts */
+};
+
+#endif /* __BFA_DEFS_POM_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_port.h patch/drivers/scsi/bfa/include/defs/bfa_defs_port.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_port.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_port.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,245 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_PORT_H__
+#define __BFA_DEFS_PORT_H__
+
+#include <bfa_os_inc.h>
+#include <protocol/types.h>
+#include <defs/bfa_defs_pport.h>
+#include <defs/bfa_defs_ioc.h>
+
+#define BFA_FCS_FABRIC_IPADDR_SZ 16
+
+/**
+ * symbolic names for base port/virtual port
+ */
+#define BFA_SYMNAME_MAXLEN 128 /* vmware/windows uses 128 bytes */
+struct bfa_port_symname_s {
+ char symname[BFA_SYMNAME_MAXLEN];
+};
+
+/**
+* Roles of FCS port:
+ * - FCP IM and FCP TM roles cannot be enabled together for a FCS port
+ * - Create multiple ports if both IM and TM functions required.
+ * - Atleast one role must be specified.
+ */
+enum bfa_port_role {
+ BFA_PORT_ROLE_FCP_IM = 0x01, /* FCP initiator role */
+ BFA_PORT_ROLE_FCP_TM = 0x02, /* FCP target role */
+ BFA_PORT_ROLE_FCP_IPFC = 0x04, /* IP over FC role */
+ BFA_PORT_ROLE_FCP_MAX = BFA_PORT_ROLE_FCP_IPFC | BFA_PORT_ROLE_FCP_IM
+};
+
+/**
+ * FCS port configuration.
+ */
+struct bfa_port_cfg_s {
+ wwn_t pwwn; /* port wwn */
+ wwn_t nwwn; /* node wwn */
+ struct bfa_port_symname_s sym_name; /* vm port symbolic name */
+ enum bfa_port_role roles; /* FCS port roles */
+ u32 rsvd;
+ u8 tag[16]; /* opaque tag from application */
+};
+
+/**
+ * FCS port states
+ */
+enum bfa_port_state {
+ BFA_PORT_UNINIT = 0, /* PORT is not yet initialized */
+ BFA_PORT_FDISC = 1, /* FDISC is in progress */
+ BFA_PORT_ONLINE = 2, /* login to fabric is complete */
+ BFA_PORT_OFFLINE = 3, /* No login to fabric */
+};
+
+/**
+ * FCS port type. Required for VmWare.
+ */
+enum bfa_port_type {
+ BFA_PORT_TYPE_PHYSICAL = 0,
+ BFA_PORT_TYPE_VIRTUAL,
+};
+
+/**
+ * FCS port offline reason. Required for VmWare.
+ */
+enum bfa_port_offline_reason {
+ BFA_PORT_OFFLINE_UNKNOWN = 0,
+ BFA_PORT_OFFLINE_LINKDOWN,
+ BFA_PORT_OFFLINE_FAB_UNSUPPORTED, /* NPIV not supported by the
+ * fabric */
+ BFA_PORT_OFFLINE_FAB_NORESOURCES,
+ BFA_PORT_OFFLINE_FAB_LOGOUT,
+};
+
+/**
+ * FCS lport info. Required for VmWare.
+ */
+struct bfa_port_info_s {
+ u8 port_type; /* bfa_port_type_t : physical or
+ * virtual */
+ u8 port_state; /* one of bfa_port_state values */
+ u8 offline_reason; /* one of bfa_port_offline_reason_t
+ * values */
+ wwn_t port_wwn;
+ wwn_t node_wwn;
+
+ /*
+ * following 4 feilds are valid for Physical Ports only
+ */
+ u32 max_vports_supp; /* Max supported vports */
+ u32 num_vports_inuse; /* Num of in use vports */
+ u32 max_rports_supp; /* Max supported rports */
+ u32 num_rports_inuse; /* Num of doscovered rports */
+
+};
+
+/**
+ * FCS port statistics
+ */
+struct bfa_port_stats_s {
+ u32 ns_plogi_sent;
+ u32 ns_plogi_rsp_err;
+ u32 ns_plogi_acc_err;
+ u32 ns_plogi_accepts;
+ u32 ns_rejects; /* NS command rejects */
+ u32 ns_plogi_unknown_rsp;
+ u32 ns_plogi_alloc_wait;
+
+ u32 ns_retries; /* NS command retries */
+ u32 ns_timeouts; /* NS command timeouts */
+
+ u32 ns_rspnid_sent;
+ u32 ns_rspnid_accepts;
+ u32 ns_rspnid_rsp_err;
+ u32 ns_rspnid_rejects;
+ u32 ns_rspnid_alloc_wait;
+
+ u32 ns_rftid_sent;
+ u32 ns_rftid_accepts;
+ u32 ns_rftid_rsp_err;
+ u32 ns_rftid_rejects;
+ u32 ns_rftid_alloc_wait;
+
+ u32 ns_rffid_sent;
+ u32 ns_rffid_accepts;
+ u32 ns_rffid_rsp_err;
+ u32 ns_rffid_rejects;
+ u32 ns_rffid_alloc_wait;
+
+ u32 ns_gidft_sent;
+ u32 ns_gidft_accepts;
+ u32 ns_gidft_rsp_err;
+ u32 ns_gidft_rejects;
+ u32 ns_gidft_unknown_rsp;
+ u32 ns_gidft_alloc_wait;
+
+ /*
+ * Mgmt Server stats
+ */
+ u32 ms_retries; /* MS command retries */
+ u32 ms_timeouts; /* MS command timeouts */
+ u32 ms_plogi_sent;
+ u32 ms_plogi_rsp_err;
+ u32 ms_plogi_acc_err;
+ u32 ms_plogi_accepts;
+ u32 ms_rejects; /* NS command rejects */
+ u32 ms_plogi_unknown_rsp;
+ u32 ms_plogi_alloc_wait;
+
+ u32 num_rscn; /* Num of RSCN received */
+ u32 num_portid_rscn;/* Num portid format RSCN
+ * received */
+
+ u32 uf_recvs; /* unsolicited recv frames */
+ u32 uf_recv_drops; /* dropped received frames */
+
+ u32 rsvd; /* padding for 64 bit alignment */
+};
+
+/**
+ * BFA port attribute returned in queries
+ */
+struct bfa_port_attr_s {
+ enum bfa_port_state state; /* port state */
+ u32 pid; /* port ID */
+ struct bfa_port_cfg_s port_cfg; /* port configuration */
+ enum bfa_pport_type port_type; /* current topology */
+ u32 loopback; /* cable is externally looped back */
+ wwn_t fabric_name; /* attached switch's nwwn */
+ u8 fabric_ip_addr[BFA_FCS_FABRIC_IPADDR_SZ]; /* attached
+ * fabric's ip addr */
+};
+
+/**
+ * BFA physical port Level events
+ * Arguments below are in BFAL context from Mgmt
+ * BFA_PORT_AEN_ONLINE: [in]: pwwn [out]: pwwn
+ * BFA_PORT_AEN_OFFLINE: [in]: pwwn [out]: pwwn
+ * BFA_PORT_AEN_RLIR: [in]: None [out]: pwwn, rlir_data, rlir_len
+ * BFA_PORT_AEN_SFP_INSERT: [in]: pwwn [out]: port_id, pwwn
+ * BFA_PORT_AEN_SFP_REMOVE: [in]: pwwn [out]: port_id, pwwn
+ * BFA_PORT_AEN_SFP_POM: [in]: pwwn [out]: level, port_id, pwwn
+ * BFA_PORT_AEN_ENABLE: [in]: pwwn [out]: pwwn
+ * BFA_PORT_AEN_DISABLE: [in]: pwwn [out]: pwwn
+ * BFA_PORT_AEN_AUTH_ON: [in]: pwwn [out]: pwwn
+ * BFA_PORT_AEN_AUTH_OFF: [in]: pwwn [out]: pwwn
+ * BFA_PORT_AEN_DISCONNECT: [in]: pwwn [out]: pwwn
+ * BFA_PORT_AEN_QOS_NEG: [in]: pwwn [out]: pwwn
+ * BFA_PORT_AEN_FABRIC_NAME_CHANGE: [in]: pwwn, [out]: pwwn, fwwn
+ *
+ */
+enum bfa_port_aen_event {
+ BFA_PORT_AEN_ONLINE = 1, /* Physical Port online event */
+ BFA_PORT_AEN_OFFLINE = 2, /* Physical Port offline event */
+ BFA_PORT_AEN_RLIR = 3, /* RLIR event, not supported */
+ BFA_PORT_AEN_SFP_INSERT = 4, /* SFP inserted event */
+ BFA_PORT_AEN_SFP_REMOVE = 5, /* SFP removed event */
+ BFA_PORT_AEN_SFP_POM = 6, /* SFP POM event */
+ BFA_PORT_AEN_ENABLE = 7, /* Physical Port enable event */
+ BFA_PORT_AEN_DISABLE = 8, /* Physical Port disable event */
+ BFA_PORT_AEN_AUTH_ON = 9, /* Physical Port auth success event */
+ BFA_PORT_AEN_AUTH_OFF = 10, /* Physical Port auth fail event */
+ BFA_PORT_AEN_DISCONNECT = 11, /* Physical Port disconnect event */
+ BFA_PORT_AEN_QOS_NEG = 12, /* Base Port QOS negotiation event */
+ BFA_PORT_AEN_FABRIC_NAME_CHANGE = 13, /* Fabric Name/WWN change
+ * event */
+ BFA_PORT_AEN_SFP_ACCESS_ERROR = 14, /* SFP read error event */
+ BFA_PORT_AEN_SFP_UNSUPPORT = 15, /* Unsupported SFP event */
+};
+
+enum bfa_port_aen_sfp_pom {
+ BFA_PORT_AEN_SFP_POM_GREEN = 1, /* Normal */
+ BFA_PORT_AEN_SFP_POM_AMBER = 2, /* Warning */
+ BFA_PORT_AEN_SFP_POM_RED = 3, /* Critical */
+ BFA_PORT_AEN_SFP_POM_MAX = BFA_PORT_AEN_SFP_POM_RED
+};
+
+struct bfa_port_aen_data_s {
+ enum bfa_ioc_type_e ioc_type;
+ wwn_t pwwn; /* WWN of the physical port */
+ wwn_t fwwn; /* WWN of the fabric port */
+ mac_t mac; /* MAC addres of the ethernet port,
+ * applicable to CNA port only */
+ int phy_port_num; /*! For SFP related events */
+ enum bfa_port_aen_sfp_pom level; /* Only transitions will
+ * be informed */
+};
+
+#endif /* __BFA_DEFS_PORT_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_pport.h patch/drivers/scsi/bfa/include/defs/bfa_defs_pport.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_pport.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_pport.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,383 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_PPORT_H__
+#define __BFA_DEFS_PPORT_H__
+
+#include <bfa_os_inc.h>
+#include <protocol/fc.h>
+#include <defs/bfa_defs_types.h>
+#include <defs/bfa_defs_qos.h>
+#include <cna/pstats/phyport_defs.h>
+
+/* Modify char* port_stt[] in bfal_port.c if a new state was added */
+enum bfa_pport_states {
+ BFA_PPORT_ST_UNINIT = 1,
+ BFA_PPORT_ST_ENABLING_QWAIT = 2,
+ BFA_PPORT_ST_ENABLING = 3,
+ BFA_PPORT_ST_LINKDOWN = 4,
+ BFA_PPORT_ST_LINKUP = 5,
+ BFA_PPORT_ST_DISABLING_QWAIT = 6,
+ BFA_PPORT_ST_DISABLING = 7,
+ BFA_PPORT_ST_DISABLED = 8,
+ BFA_PPORT_ST_STOPPED = 9,
+ BFA_PPORT_ST_IOCDOWN = 10,
+ BFA_PPORT_ST_IOCDIS = 11,
+ BFA_PPORT_ST_FWMISMATCH = 12,
+ BFA_PPORT_ST_MAX_STATE,
+};
+
+/**
+ * Port speed settings. Each specific speed is a bit field. Use multiple
+ * bits to specify speeds to be selected for auto-negotiation.
+ */
+enum bfa_pport_speed {
+ BFA_PPORT_SPEED_UNKNOWN = 0,
+ BFA_PPORT_SPEED_1GBPS = 1,
+ BFA_PPORT_SPEED_2GBPS = 2,
+ BFA_PPORT_SPEED_4GBPS = 4,
+ BFA_PPORT_SPEED_8GBPS = 8,
+ BFA_PPORT_SPEED_10GBPS = 10,
+ BFA_PPORT_SPEED_AUTO =
+ (BFA_PPORT_SPEED_1GBPS | BFA_PPORT_SPEED_2GBPS |
+ BFA_PPORT_SPEED_4GBPS | BFA_PPORT_SPEED_8GBPS),
+};
+
+/**
+ * Port operational type (in sync with SNIA port type).
+ */
+enum bfa_pport_type {
+ BFA_PPORT_TYPE_UNKNOWN = 1, /* port type is unkown */
+ BFA_PPORT_TYPE_TRUNKED = 2, /* Trunked mode */
+ BFA_PPORT_TYPE_NPORT = 5, /* P2P with switched fabric */
+ BFA_PPORT_TYPE_NLPORT = 6, /* public loop */
+ BFA_PPORT_TYPE_LPORT = 20, /* private loop */
+ BFA_PPORT_TYPE_P2P = 21, /* P2P with no switched fabric */
+ BFA_PPORT_TYPE_VPORT = 22, /* NPIV - virtual port */
+};
+
+/**
+ * Port topology setting. A port's topology and fabric login status
+ * determine its operational type.
+ */
+enum bfa_pport_topology {
+ BFA_PPORT_TOPOLOGY_NONE = 0, /* No valid topology */
+ BFA_PPORT_TOPOLOGY_P2P = 1, /* P2P only */
+ BFA_PPORT_TOPOLOGY_LOOP = 2, /* LOOP topology */
+ BFA_PPORT_TOPOLOGY_AUTO = 3, /* auto topology selection */
+};
+
+/**
+ * Physical port loopback types.
+ */
+enum bfa_pport_opmode {
+ BFA_PPORT_OPMODE_NORMAL = 0x00, /* normal non-loopback mode */
+ BFA_PPORT_OPMODE_LB_INT = 0x01, /* internal loop back */
+ BFA_PPORT_OPMODE_LB_SLW = 0x02, /* serial link wrapback (serdes) */
+ BFA_PPORT_OPMODE_LB_EXT = 0x04, /* external loop back (serdes) */
+ BFA_PPORT_OPMODE_LB_CBL = 0x08, /* cabled loop back */
+ BFA_PPORT_OPMODE_LB_NLINT = 0x20, /* NL_Port internal loopback */
+};
+
+#define BFA_PPORT_OPMODE_LB_HARD(_mode) \
+ ((_mode == BFA_PPORT_OPMODE_LB_INT) || \
+ (_mode == BFA_PPORT_OPMODE_LB_SLW) || \
+ (_mode == BFA_PPORT_OPMODE_LB_EXT))
+
+/**
+ Port State (in sync with SNIA port state).
+ */
+enum bfa_pport_snia_state {
+ BFA_PPORT_STATE_UNKNOWN = 1, /* port is not initialized */
+ BFA_PPORT_STATE_ONLINE = 2, /* port is ONLINE */
+ BFA_PPORT_STATE_DISABLED = 3, /* port is disabled by user */
+ BFA_PPORT_STATE_BYPASSED = 4, /* port is bypassed (in LOOP) */
+ BFA_PPORT_STATE_DIAG = 5, /* port diagnostics is active */
+ BFA_PPORT_STATE_LINKDOWN = 6, /* link is down */
+ BFA_PPORT_STATE_LOOPBACK = 8, /* port is looped back */
+};
+
+/**
+ * Port link state
+ */
+enum bfa_pport_linkstate {
+ BFA_PPORT_LINKUP = 1, /* Physical port/Trunk link up */
+ BFA_PPORT_LINKDOWN = 2, /* Physical port/Trunk link down */
+ BFA_PPORT_TRUNK_LINKDOWN = 3, /* Trunk link down (new tmaster) */
+};
+
+/**
+ * Port link state event
+ */
+#define bfa_pport_event_t enum bfa_pport_linkstate
+
+/**
+ * Port link state reason code
+ */
+enum bfa_pport_linkstate_rsn {
+ BFA_PPORT_LINKSTATE_RSN_NONE = 0,
+ BFA_PPORT_LINKSTATE_RSN_DISABLED = 1,
+ BFA_PPORT_LINKSTATE_RSN_RX_NOS = 2,
+ BFA_PPORT_LINKSTATE_RSN_RX_OLS = 3,
+ BFA_PPORT_LINKSTATE_RSN_RX_LIP = 4,
+ BFA_PPORT_LINKSTATE_RSN_RX_LIPF7 = 5,
+ BFA_PPORT_LINKSTATE_RSN_SFP_REMOVED = 6,
+ BFA_PPORT_LINKSTATE_RSN_PORT_FAULT = 7,
+ BFA_PPORT_LINKSTATE_RSN_RX_LOS = 8,
+ BFA_PPORT_LINKSTATE_RSN_LOCAL_FAULT = 9,
+ BFA_PPORT_LINKSTATE_RSN_REMOTE_FAULT = 10,
+ BFA_PPORT_LINKSTATE_RSN_TIMEOUT = 11,
+
+
+
+ /* CEE related reason codes/errors */
+ CEE_LLDP_INFO_AGED_OUT = 20,
+ CEE_LLDP_SHUTDOWN_TLV_RCVD = 21,
+ CEE_PEER_NOT_ADVERTISE_DCBX = 22,
+ CEE_PEER_NOT_ADVERTISE_PG = 23,
+ CEE_PEER_NOT_ADVERTISE_PFC = 24,
+ CEE_PEER_NOT_ADVERTISE_FCOE = 25,
+ CEE_PG_NOT_COMPATIBLE = 26,
+ CEE_PFC_NOT_COMPATIBLE = 27,
+ CEE_FCOE_NOT_COMPATIBLE = 28,
+ CEE_BAD_PG_RCVD = 29,
+ CEE_BAD_BW_RCVD = 30,
+ CEE_BAD_PFC_RCVD = 31,
+ CEE_BAD_FCOE_PRI_RCVD = 32,
+ CEE_FCOE_PRI_PFC_OFF = 33,
+ CEE_DUP_CONTROL_TLV_RCVD = 34,
+ CEE_DUP_FEAT_TLV_RCVD = 35,
+ CEE_APPLY_NEW_CFG = 36, /* reason, not an error */
+ CEE_PROTOCOL_INIT = 37, /* reason, not an error */
+ CEE_PHY_LINK_DOWN = 38,
+ CEE_LLS_FCOE_ABSENT = 39,
+ CEE_LLS_FCOE_DOWN = 40
+};
+
+/**
+ * Default Target Rate Limiting Speed.
+ */
+#define BFA_PPORT_DEF_TRL_SPEED BFA_PPORT_SPEED_1GBPS
+
+/**
+ * Physical port configuration
+ */
+struct bfa_pport_cfg_s {
+ u8 topology; /* bfa_pport_topology */
+ u8 speed; /* enum bfa_pport_speed */
+ u8 trunked; /* trunked or not */
+ u8 qos_enabled; /* qos enabled or not */
+ u8 trunk_ports; /* bitmap of trunked ports */
+ u8 cfg_hardalpa; /* is hard alpa configured */
+ u16 maxfrsize; /* maximum frame size */
+ u8 hardalpa; /* configured hard alpa */
+ u8 rx_bbcredit; /* receive buffer credits */
+ u8 tx_bbcredit; /* transmit buffer credits */
+ u8 ratelimit; /* ratelimit enabled or not */
+ u8 trl_def_speed; /* ratelimit default speed */
+ u8 rsvd[3];
+ u16 path_tov; /* device path timeout */
+ u16 q_depth; /* SCSI Queue depth */
+};
+
+/**
+ * Port attribute values.
+ */
+struct bfa_pport_attr_s {
+ /*
+ * Static fields
+ */
+ wwn_t nwwn; /* node wwn */
+ wwn_t pwwn; /* port wwn */
+ enum fc_cos cos_supported; /* supported class of services */
+ u32 rsvd;
+ struct fc_symname_s port_symname; /* port symbolic name */
+ enum bfa_pport_speed speed_supported; /* supported speeds */
+ bfa_boolean_t pbind_enabled; /* Will be set if Persistent binding
+ * enabled. Relevant only in Windows
+ */
+
+ /*
+ * Configured values
+ */
+ struct bfa_pport_cfg_s pport_cfg; /* pport cfg */
+
+ /*
+ * Dynamic field - info from BFA
+ */
+ enum bfa_pport_states port_state; /* current port state */
+ enum bfa_pport_speed speed; /* current speed */
+ enum bfa_pport_topology topology; /* current topology */
+ bfa_boolean_t beacon; /* current beacon status */
+ bfa_boolean_t link_e2e_beacon;/* set if link beacon on */
+ bfa_boolean_t plog_enabled; /* set if portlog is enabled*/
+
+ /*
+ * Dynamic field - info from FCS
+ */
+ u32 pid; /* port ID */
+ enum bfa_pport_type port_type; /* current topology */
+ u32 loopback; /* external loopback */
+ u32 rsvd1;
+ u32 rsvd2; /* padding for 64 bit */
+};
+
+/**
+ * FC Port statistics.
+ */
+struct bfa_pport_fc_stats_s {
+ u64 secs_reset; /* seconds since stats is reset */
+ u64 tx_frames; /* transmitted frames */
+ u64 tx_words; /* transmitted words */
+ u64 rx_frames; /* received frames */
+ u64 rx_words; /* received words */
+ u64 lip_count; /* LIPs seen */
+ u64 nos_count; /* NOS count */
+ u64 error_frames; /* errored frames (sent?) */
+ u64 dropped_frames; /* dropped frames */
+ u64 link_failures; /* link failure count */
+ u64 loss_of_syncs; /* loss of sync count */
+ u64 loss_of_signals;/* loss of signal count */
+ u64 primseq_errs; /* primitive sequence protocol */
+ u64 bad_os_count; /* invalid ordered set */
+ u64 err_enc_out; /* Encoding error outside frame */
+ u64 invalid_crcs; /* frames received with invalid CRC*/
+ u64 undersized_frm; /* undersized frames */
+ u64 oversized_frm; /* oversized frames */
+ u64 bad_eof_frm; /* frames with bad EOF */
+ struct bfa_qos_stats_s qos_stats; /* QoS statistics */
+};
+
+/**
+ * Eth Port statistics.
+ */
+struct bfa_pport_eth_stats_s {
+ u64 secs_reset; /* seconds since stats is reset */
+ u64 frame_64; /* both rx and tx counter */
+ u64 frame_65_127; /* both rx and tx counter */
+ u64 frame_128_255; /* both rx and tx counter */
+ u64 frame_256_511; /* both rx and tx counter */
+ u64 frame_512_1023; /* both rx and tx counter */
+ u64 frame_1024_1518; /* both rx and tx counter */
+ u64 frame_1519_1522; /* both rx and tx counter */
+
+ u64 tx_bytes;
+ u64 tx_packets;
+ u64 tx_mcast_packets;
+ u64 tx_bcast_packets;
+ u64 tx_control_frame;
+ u64 tx_drop;
+ u64 tx_jabber;
+ u64 tx_fcs_error;
+ u64 tx_fragments;
+
+ u64 rx_bytes;
+ u64 rx_packets;
+ u64 rx_mcast_packets;
+ u64 rx_bcast_packets;
+ u64 rx_control_frames;
+ u64 rx_unknown_opcode;
+ u64 rx_drop;
+ u64 rx_jabber;
+ u64 rx_fcs_error;
+ u64 rx_alignment_error;
+ u64 rx_frame_length_error;
+ u64 rx_code_error;
+ u64 rx_fragments;
+
+ u64 rx_pause; /* BPC */
+ u64 rx_zero_pause; /* BPC Pause cancellation */
+ u64 tx_pause; /* BPC */
+ u64 tx_zero_pause; /* BPC Pause cancellation */
+ u64 rx_fcoe_pause; /* BPC */
+ u64 rx_fcoe_zero_pause; /* BPC Pause cancellation */
+ u64 tx_fcoe_pause; /* BPC */
+ u64 tx_fcoe_zero_pause; /* BPC Pause cancellation */
+};
+
+/**
+ * Port statistics.
+ */
+union bfa_pport_stats_u {
+ struct bfa_pport_fc_stats_s fc;
+ struct bfa_pport_eth_stats_s eth;
+};
+
+/**
+ * Port FCP mappings.
+ */
+struct bfa_pport_fcpmap_s {
+ char osdevname[256];
+ u32 bus;
+ u32 target;
+ u32 oslun;
+ u32 fcid;
+ wwn_t nwwn;
+ wwn_t pwwn;
+ u64 fcplun;
+ char luid[256];
+};
+
+/**
+ * Port RNID info.
+ */
+struct bfa_pport_rnid_s {
+ wwn_t wwn;
+ u32 unittype;
+ u32 portid;
+ u32 attached_nodes_num;
+ u16 ip_version;
+ u16 udp_port;
+ u8 ipaddr[16];
+ u16 rsvd;
+ u16 topologydiscoveryflags;
+};
+
+/**
+ * Link state information
+ */
+struct bfa_pport_link_s {
+ u8 linkstate; /* Link state bfa_pport_linkstate */
+ u8 linkstate_rsn; /* bfa_pport_linkstate_rsn_t */
+ u8 topology; /* P2P/LOOP bfa_pport_topology */
+ u8 speed; /* Link speed (1/2/4/8 G) */
+ u32 linkstate_opt; /* Linkstate optional data (debug) */
+ u8 trunked; /* Trunked or not (1 or 0) */
+ u8 resvd[3];
+ struct bfa_qos_attr_s qos_attr; /* QoS Attributes */
+ struct bfa_qos_vc_attr_s qos_vc_attr; /* VC info from ELP */
+ union {
+ struct {
+ u8 tmaster;/* Trunk Master or
+ * not (1 or 0) */
+ u8 tlinks; /* Trunk links bitmap
+ * (linkup) */
+ u8 resv1; /* Reserved */
+ } trunk_info;
+
+ struct {
+ u8 myalpa; /* alpa claimed */
+ u8 login_req; /* Login required or
+ * not (1 or 0) */
+ u8 alpabm_val;/* alpa bitmap valid
+ * or not (1 or 0) */
+ struct fc_alpabm_s alpabm; /* alpa bitmap */
+ } loop_info;
+ } tl;
+};
+
+#endif /* __BFA_DEFS_PPORT_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_qos.h patch/drivers/scsi/bfa/include/defs/bfa_defs_qos.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_qos.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_qos.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,99 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_QOS_H__
+#define __BFA_DEFS_QOS_H__
+
+/**
+ * QoS states
+ */
+enum bfa_qos_state {
+ BFA_QOS_ONLINE = 1, /* QoS is online */
+ BFA_QOS_OFFLINE = 2, /* QoS is offline */
+};
+
+
+/**
+ * QoS Priority levels.
+ */
+enum bfa_qos_priority {
+ BFA_QOS_UNKNOWN = 0,
+ BFA_QOS_HIGH = 1, /* QoS Priority Level High */
+ BFA_QOS_MED = 2, /* QoS Priority Level Medium */
+ BFA_QOS_LOW = 3, /* QoS Priority Level Low */
+};
+
+
+/**
+ * QoS bandwidth allocation for each priority level
+ */
+enum bfa_qos_bw_alloc {
+ BFA_QOS_BW_HIGH = 60, /* bandwidth allocation for High */
+ BFA_QOS_BW_MED = 30, /* bandwidth allocation for Medium */
+ BFA_QOS_BW_LOW = 10, /* bandwidth allocation for Low */
+};
+
+/**
+ * QoS attribute returned in QoS Query
+ */
+struct bfa_qos_attr_s {
+ enum bfa_qos_state state; /* QoS current state */
+ u32 total_bb_cr; /* Total BB Credits */
+};
+
+/**
+ * These fields should be displayed only from the CLI.
+ * There will be a separate BFAL API (get_qos_vc_attr ?)
+ * to retrieve this.
+ *
+ */
+#define BFA_QOS_MAX_VC 16
+
+struct bfa_qos_vc_info_s {
+ u8 vc_credit;
+ u8 borrow_credit;
+ u8 priority;
+ u8 resvd;
+};
+
+struct bfa_qos_vc_attr_s {
+ u16 total_vc_count; /* Total VC Count */
+ u16 shared_credit;
+ u32 elp_opmode_flags;
+ struct bfa_qos_vc_info_s vc_info[BFA_QOS_MAX_VC]; /* as many as
+ * total_vc_count */
+};
+
+/**
+ * QoS statistics
+ */
+struct bfa_qos_stats_s {
+ u32 flogi_sent; /* QoS Flogi sent */
+ u32 flogi_acc_recvd; /* QoS Flogi Acc received */
+ u32 flogi_rjt_recvd; /* QoS Flogi rejects received */
+ u32 flogi_retries; /* QoS Flogi retries */
+
+ u32 elp_recvd; /* QoS ELP received */
+ u32 elp_accepted; /* QoS ELP Accepted */
+ u32 elp_rejected; /* QoS ELP rejected */
+ u32 elp_dropped; /* QoS ELP dropped */
+
+ u32 qos_rscn_recvd; /* QoS RSCN received */
+ u32 rsvd; /* padding for 64 bit alignment */
+};
+
+#endif /* __BFA_DEFS_QOS_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_rport.h patch/drivers/scsi/bfa/include/defs/bfa_defs_rport.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_rport.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_rport.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,199 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_RPORT_H__
+#define __BFA_DEFS_RPORT_H__
+
+#include <bfa_os_inc.h>
+#include <protocol/types.h>
+#include <defs/bfa_defs_pport.h>
+#include <defs/bfa_defs_port.h>
+#include <defs/bfa_defs_qos.h>
+
+/**
+ * FCS remote port states
+ */
+enum bfa_rport_state {
+ BFA_RPORT_UNINIT = 0, /* PORT is not yet initialized */
+ BFA_RPORT_OFFLINE = 1, /* rport is offline */
+ BFA_RPORT_PLOGI = 2, /* PLOGI to rport is in progress */
+ BFA_RPORT_ONLINE = 3, /* login to rport is complete */
+ BFA_RPORT_PLOGI_RETRY = 4, /* retrying login to rport */
+ BFA_RPORT_NSQUERY = 5, /* nameserver query */
+ BFA_RPORT_ADISC = 6, /* ADISC authentication */
+ BFA_RPORT_LOGO = 7, /* logging out with rport */
+ BFA_RPORT_LOGORCV = 8, /* handling LOGO from rport */
+ BFA_RPORT_NSDISC = 9, /* re-discover rport */
+};
+
+/**
+ * Rport Scsi Function : Initiator/Target.
+ */
+enum bfa_rport_function {
+ BFA_RPORT_INITIATOR = 0x01, /* SCSI Initiator */
+ BFA_RPORT_TARGET = 0x02, /* SCSI Target */
+};
+
+/**
+ * port/node symbolic names for rport
+ */
+#define BFA_RPORT_SYMNAME_MAXLEN 255
+struct bfa_rport_symname_s {
+ char symname[BFA_RPORT_SYMNAME_MAXLEN];
+};
+
+struct bfa_rport_hal_stats_s {
+ u32 sm_un_cr; /* uninit: create events */
+ u32 sm_un_unexp; /* uninit: exception events */
+ u32 sm_cr_on; /* created: online events */
+ u32 sm_cr_del; /* created: delete events */
+ u32 sm_cr_hwf; /* created: IOC down */
+ u32 sm_cr_unexp; /* created: exception events */
+ u32 sm_fwc_rsp; /* fw create: f/w responses */
+ u32 sm_fwc_del; /* fw create: delete events */
+ u32 sm_fwc_off; /* fw create: offline events */
+ u32 sm_fwc_hwf; /* fw create: IOC down */
+ u32 sm_fwc_unexp; /* fw create: exception events*/
+ u32 sm_on_off; /* online: offline events */
+ u32 sm_on_del; /* online: delete events */
+ u32 sm_on_hwf; /* online: IOC down events */
+ u32 sm_on_unexp; /* online: exception events */
+ u32 sm_fwd_rsp; /* fw delete: fw responses */
+ u32 sm_fwd_del; /* fw delete: delete events */
+ u32 sm_fwd_hwf; /* fw delete: IOC down events */
+ u32 sm_fwd_unexp; /* fw delete: exception events*/
+ u32 sm_off_del; /* offline: delete events */
+ u32 sm_off_on; /* offline: online events */
+ u32 sm_off_hwf; /* offline: IOC down events */
+ u32 sm_off_unexp; /* offline: exception events */
+ u32 sm_del_fwrsp; /* delete: fw responses */
+ u32 sm_del_hwf; /* delete: IOC down events */
+ u32 sm_del_unexp; /* delete: exception events */
+ u32 sm_delp_fwrsp; /* delete pend: fw responses */
+ u32 sm_delp_hwf; /* delete pend: IOC downs */
+ u32 sm_delp_unexp; /* delete pend: exceptions */
+ u32 sm_offp_fwrsp; /* off-pending: fw responses */
+ u32 sm_offp_del; /* off-pending: deletes */
+ u32 sm_offp_hwf; /* off-pending: IOC downs */
+ u32 sm_offp_unexp; /* off-pending: exceptions */
+ u32 sm_iocd_off; /* IOC down: offline events */
+ u32 sm_iocd_del; /* IOC down: delete events */
+ u32 sm_iocd_on; /* IOC down: online events */
+ u32 sm_iocd_unexp; /* IOC down: exceptions */
+ u32 rsvd;
+};
+
+/**
+ * FCS remote port statistics
+ */
+struct bfa_rport_stats_s {
+ u32 offlines; /* remote port offline count */
+ u32 onlines; /* remote port online count */
+ u32 rscns; /* RSCN affecting rport */
+ u32 plogis; /* plogis sent */
+ u32 plogi_accs; /* plogi accepts */
+ u32 plogi_timeouts; /* plogi timeouts */
+ u32 plogi_rejects; /* rcvd plogi rejects */
+ u32 plogi_failed; /* local failure */
+ u32 plogi_rcvd; /* plogis rcvd */
+ u32 prli_rcvd; /* inbound PRLIs */
+ u32 adisc_rcvd; /* ADISCs received */
+ u32 adisc_rejects; /* recvd ADISC rejects */
+ u32 adisc_sent; /* ADISC requests sent */
+ u32 adisc_accs; /* ADISC accepted by rport */
+ u32 adisc_failed; /* ADISC failed (no response) */
+ u32 adisc_rejected; /* ADISC rejected by us */
+ u32 logos; /* logos sent */
+ u32 logo_accs; /* LOGO accepts from rport */
+ u32 logo_failed; /* LOGO failures */
+ u32 logo_rejected; /* LOGO rejects from rport */
+ u32 logo_rcvd; /* LOGO from remote port */
+
+ u32 rpsc_rcvd; /* RPSC received */
+ u32 rpsc_rejects; /* recvd RPSC rejects */
+ u32 rpsc_sent; /* RPSC requests sent */
+ u32 rpsc_accs; /* RPSC accepted by rport */
+ u32 rpsc_failed; /* RPSC failed (no response) */
+ u32 rpsc_rejected; /* RPSC rejected by us */
+
+ u32 rsvd;
+ struct bfa_rport_hal_stats_s hal_stats; /* BFA rport stats */
+};
+
+/**
+ * Rport's QoS attributes
+ */
+struct bfa_rport_qos_attr_s {
+ enum bfa_qos_priority qos_priority; /* rport's QoS priority */
+ u32 qos_flow_id; /* QoS flow Id */
+};
+
+/**
+ * FCS remote port attributes returned in queries
+ */
+struct bfa_rport_attr_s {
+ wwn_t nwwn; /* node wwn */
+ wwn_t pwwn; /* port wwn */
+ enum fc_cos cos_supported; /* supported class of services */
+ u32 pid; /* port ID */
+ u32 df_sz; /* Max payload size */
+ enum bfa_rport_state state; /* Rport State machine state */
+ enum fc_cos fc_cos; /* FC classes of services */
+ bfa_boolean_t cisc; /* CISC capable device */
+ struct bfa_rport_symname_s symname; /* Symbolic Name */
+ enum bfa_rport_function scsi_function; /* Initiator/Target */
+ struct bfa_rport_qos_attr_s qos_attr; /* qos attributes */
+ enum bfa_pport_speed curr_speed; /* operating speed got from
+ * RPSC ELS. UNKNOWN, if RPSC
+ * is not supported */
+ bfa_boolean_t trl_enforced; /* TRL enforced ? TRUE/FALSE */
+ enum bfa_pport_speed assigned_speed; /* Speed assigned by the user.
+ * will be used if RPSC is not
+ * supported by the rport */
+};
+
+#define bfa_rport_aen_qos_data_t struct bfa_rport_qos_attr_s
+
+/**
+ * BFA remote port events
+ * Arguments below are in BFAL context from Mgmt
+ * BFA_RPORT_AEN_ONLINE: [in]: lpwwn [out]: vf_id, lpwwn, rpwwn
+ * BFA_RPORT_AEN_OFFLINE: [in]: lpwwn [out]: vf_id, lpwwn, rpwwn
+ * BFA_RPORT_AEN_DISCONNECT:[in]: lpwwn [out]: vf_id, lpwwn, rpwwn
+ * BFA_RPORT_AEN_QOS_PRIO: [in]: lpwwn [out]: vf_id, lpwwn, rpwwn, prio
+ * BFA_RPORT_AEN_QOS_FLOWID:[in]: lpwwn [out]: vf_id, lpwwn, rpwwn, flow_id
+ */
+enum bfa_rport_aen_event {
+ BFA_RPORT_AEN_ONLINE = 1, /* RPort online event */
+ BFA_RPORT_AEN_OFFLINE = 2, /* RPort offline event */
+ BFA_RPORT_AEN_DISCONNECT = 3, /* RPort disconnect event */
+ BFA_RPORT_AEN_QOS_PRIO = 4, /* QOS priority change event */
+ BFA_RPORT_AEN_QOS_FLOWID = 5, /* QOS flow Id change event */
+};
+
+struct bfa_rport_aen_data_s {
+ u16 vf_id; /* vf_id of this logical port */
+ u16 rsvd[3];
+ wwn_t ppwwn; /* WWN of its physical port */
+ wwn_t lpwwn; /* WWN of this logical port */
+ wwn_t rpwwn; /* WWN of this remote port */
+ union {
+ bfa_rport_aen_qos_data_t qos;
+ } priv;
+};
+
+#endif /* __BFA_DEFS_RPORT_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_status.h patch/drivers/scsi/bfa/include/defs/bfa_defs_status.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_status.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_status.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,255 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_STATUS_H__
+#define __BFA_DEFS_STATUS_H__
+
+/**
+ * API status return values
+ *
+ * NOTE: The error msgs are auto generated from the comments. Only singe line
+ * comments are supported
+ */
+enum bfa_status {
+ BFA_STATUS_OK = 0, /* Success */
+ BFA_STATUS_FAILED = 1, /* Operation failed */
+ BFA_STATUS_EINVAL = 2, /* Invalid params Check input
+ * parameters */
+ BFA_STATUS_ENOMEM = 3, /* Out of resources */
+ BFA_STATUS_ENOSYS = 4, /* Function not implemented */
+ BFA_STATUS_ETIMER = 5, /* Timer expired - Retry, if
+ * persists, contact support */
+ BFA_STATUS_EPROTOCOL = 6, /* Protocol error */
+ BFA_STATUS_ENOFCPORTS = 7, /* No FC ports resources */
+ BFA_STATUS_NOFLASH = 8, /* Flash not present */
+ BFA_STATUS_BADFLASH = 9, /* Flash is corrupted or bad */
+ BFA_STATUS_SFP_UNSUPP = 10, /* Unsupported SFP - Replace SFP */
+ BFA_STATUS_UNKNOWN_VFID = 11, /* VF_ID not found */
+ BFA_STATUS_DATACORRUPTED = 12, /* Diag returned data corrupted
+ * contact support */
+ BFA_STATUS_DEVBUSY = 13, /* Device busy - Retry operation */
+ BFA_STATUS_ABORTED = 14, /* Operation aborted */
+ BFA_STATUS_NODEV = 15, /* Dev is not present */
+ BFA_STATUS_HDMA_FAILED = 16, /* Host dma failed contact support */
+ BFA_STATUS_FLASH_BAD_LEN = 17, /* Flash bad length */
+ BFA_STATUS_UNKNOWN_LWWN = 18, /* LPORT PWWN not found */
+ BFA_STATUS_UNKNOWN_RWWN = 19, /* RPORT PWWN not found */
+ BFA_STATUS_FCPT_LS_RJT = 20, /* Got LS_RJT for FC Pass
+ * through Req */
+ BFA_STATUS_VPORT_EXISTS = 21, /* VPORT already exists */
+ BFA_STATUS_VPORT_MAX = 22, /* Reached max VPORT supported
+ * limit */
+ BFA_STATUS_UNSUPP_SPEED = 23, /* Invalid Speed Check speed
+ * setting */
+ BFA_STATUS_INVLD_DFSZ = 24, /* Invalid Max data field size */
+ BFA_STATUS_CNFG_FAILED = 25, /* Setting can not be persisted */
+ BFA_STATUS_CMD_NOTSUPP = 26, /* Command/API not supported */
+ BFA_STATUS_NO_ADAPTER = 27, /* No Brocade Adapter Found */
+ BFA_STATUS_LINKDOWN = 28, /* Link is down - Check or replace
+ * SFP/cable */
+ BFA_STATUS_FABRIC_RJT = 29, /* Reject from attached fabric */
+ BFA_STATUS_UNKNOWN_VWWN = 30, /* VPORT PWWN not found */
+ BFA_STATUS_NSLOGIN_FAILED = 31, /* Nameserver login failed */
+ BFA_STATUS_NO_RPORTS = 32, /* No remote ports found */
+ BFA_STATUS_NSQUERY_FAILED = 33, /* Nameserver query failed */
+ BFA_STATUS_PORT_OFFLINE = 34, /* Port is not online */
+ BFA_STATUS_RPORT_OFFLINE = 35, /* RPORT is not online */
+ BFA_STATUS_TGTOPEN_FAILED = 36, /* Remote SCSI target open failed */
+ BFA_STATUS_BAD_LUNS = 37, /* No valid LUNs found */
+ BFA_STATUS_IO_FAILURE = 38, /* SCSI target IO failure */
+ BFA_STATUS_NO_FABRIC = 39, /* No switched fabric present */
+ BFA_STATUS_EBADF = 40, /* Bad file descriptor */
+ BFA_STATUS_EINTR = 41, /* A signal was caught during ioctl */
+ BFA_STATUS_EIO = 42, /* I/O error */
+ BFA_STATUS_ENOTTY = 43, /* Inappropriate I/O control
+ * operation */
+ BFA_STATUS_ENXIO = 44, /* No such device or address */
+ BFA_STATUS_EFOPEN = 45, /* Failed to open file */
+ BFA_STATUS_VPORT_WWN_BP = 46, /* WWN is same as base port's WWN */
+ BFA_STATUS_PORT_NOT_DISABLED = 47, /* Port not disabled disable port
+ * first */
+ BFA_STATUS_BADFRMHDR = 48, /* Bad frame header */
+ BFA_STATUS_BADFRMSZ = 49, /* Bad frame size check and replace
+ * SFP/cable */
+ BFA_STATUS_MISSINGFRM = 50, /* Missing frame check and replace
+ * SFP/cable */
+ BFA_STATUS_LINKTIMEOUT = 51, /* Link timeout check and replace
+ * SFP/cable */
+ BFA_STATUS_NO_FCPIM_NEXUS = 52, /* No FCP Nexus exists with the
+ * rport */
+ BFA_STATUS_CHECKSUM_FAIL = 53, /* checksum failure */
+ BFA_STATUS_GZME_FAILED = 54, /* Get zone member query failed */
+ BFA_STATUS_SCSISTART_REQD = 55, /* SCSI disk require START command */
+ BFA_STATUS_IOC_FAILURE = 56, /* IOC failure - Retry, if persists
+ * contact support */
+ BFA_STATUS_INVALID_WWN = 57, /* Invalid WWN */
+ BFA_STATUS_MISMATCH = 58, /* Version mismatch */
+ BFA_STATUS_IOC_ENABLED = 59, /* IOC is already enabled */
+ BFA_STATUS_ADAPTER_ENABLED = 60, /* Adapter is not disabled disable
+ * adapter first */
+ BFA_STATUS_IOC_NON_OP = 61, /* IOC is not operational. Enable IOC
+ * and if it still fails,
+ * contact support */
+ BFA_STATUS_ADDR_MAP_FAILURE = 62, /* PCI base address not mapped
+ * in OS */
+ BFA_STATUS_SAME_NAME = 63, /* Name exists! use a different
+ * name */
+ BFA_STATUS_PENDING = 64, /* API completes asynchronously */
+ BFA_STATUS_8G_SPD = 65, /* Speed setting not valid for
+ * 8G HBA */
+ BFA_STATUS_4G_SPD = 66, /* Speed setting not valid for
+ * 4G HBA */
+ BFA_STATUS_AD_IS_ENABLE = 67, /* Adapter is already enabled */
+ BFA_STATUS_EINVAL_TOV = 68, /* Invalid path failover TOV */
+ BFA_STATUS_EINVAL_QDEPTH = 69, /* Invalid queue depth value */
+ BFA_STATUS_VERSION_FAIL = 70, /* Application/Driver version
+ * mismatch */
+ BFA_STATUS_DIAG_BUSY = 71, /* diag busy */
+ BFA_STATUS_BEACON_ON = 72, /* Port Beacon already on */
+ BFA_STATUS_BEACON_OFF = 73, /* Port Beacon already off */
+ BFA_STATUS_LBEACON_ON = 74, /* Link End-to-End Beacon already
+ * on */
+ BFA_STATUS_LBEACON_OFF = 75, /* Link End-to-End Beacon already
+ * off */
+ BFA_STATUS_PORT_NOT_INITED = 76, /* Port not initialized */
+ BFA_STATUS_RPSC_ENABLED = 77, /* Target has a valid speed */
+ BFA_STATUS_ENOFSAVE = 78, /* No saved firmware trace */
+ BFA_STATUS_BAD_FILE = 79, /* Not a valid Brocade Boot Code
+ * file */
+ BFA_STATUS_RLIM_EN = 80, /* Target rate limiting is already
+ * enabled */
+ BFA_STATUS_RLIM_DIS = 81, /* Target rate limiting is already
+ * disabled */
+ BFA_STATUS_IOC_DISABLED = 82, /* IOC is already disabled */
+ BFA_STATUS_ADAPTER_DISABLED = 83, /* Adapter is already disabled */
+ BFA_STATUS_BIOS_DISABLED = 84, /* Bios is already disabled */
+ BFA_STATUS_AUTH_ENABLED = 85, /* Authentication is already
+ * enabled */
+ BFA_STATUS_AUTH_DISABLED = 86, /* Authentication is already
+ * disabled */
+ BFA_STATUS_ERROR_TRL_ENABLED = 87, /* Target rate limiting is
+ * enabled */
+ BFA_STATUS_ERROR_QOS_ENABLED = 88, /* QoS is enabled */
+ BFA_STATUS_NO_SFP_DEV = 89, /* No SFP device check or replace SFP */
+ BFA_STATUS_MEMTEST_FAILED = 90, /* Memory test failed contact
+ * support */
+ BFA_STATUS_INVALID_DEVID = 91, /* Invalid device id provided */
+ BFA_STATUS_QOS_ENABLED = 92, /* QOS is already enabled */
+ BFA_STATUS_QOS_DISABLED = 93, /* QOS is already disabled */
+ BFA_STATUS_INCORRECT_DRV_CONFIG = 94, /* Check configuration
+ * key/value pair */
+ BFA_STATUS_REG_FAIL = 95, /* Can't read windows registry */
+ BFA_STATUS_IM_INV_CODE = 96, /* Invalid IOCTL code */
+ BFA_STATUS_IM_INV_VLAN = 97, /* Invalid VLAN ID */
+ BFA_STATUS_IM_INV_ADAPT_NAME = 98, /* Invalid adapter name */
+ BFA_STATUS_IM_LOW_RESOURCES = 99, /* Memory allocation failure in
+ * driver */
+ BFA_STATUS_IM_VLANID_IS_PVID = 100, /* Given VLAN id same as PVID */
+ BFA_STATUS_IM_VLANID_EXISTS = 101, /* Given VLAN id already exists */
+ BFA_STATUS_IM_FW_UPDATE_FAIL = 102, /* Updating firmware with new
+ * VLAN ID failed */
+ BFA_STATUS_PORTLOG_ENABLED = 103, /* Port Log is already enabled */
+ BFA_STATUS_PORTLOG_DISABLED = 104, /* Port Log is already disabled */
+ BFA_STATUS_FILE_NOT_FOUND = 105, /* Specified file could not be
+ * found */
+ BFA_STATUS_QOS_FC_ONLY = 106, /* QOS can be enabled for FC mode
+ * only */
+ BFA_STATUS_RLIM_FC_ONLY = 107, /* RATELIM can be enabled for FC mode
+ * only */
+ BFA_STATUS_CT_SPD = 108, /* Invalid speed selection for Catapult. */
+ BFA_STATUS_LEDTEST_OP = 109, /* LED test is operating */
+ BFA_STATUS_CEE_NOT_DN = 110, /* eth port is not at down state, please
+ * bring down first */
+ BFA_STATUS_10G_SPD = 111, /* Speed setting not valid for 10G HBA */
+ BFA_STATUS_IM_INV_TEAM_NAME = 112, /* Invalid team name */
+ BFA_STATUS_IM_DUP_TEAM_NAME = 113, /* Given team name already
+ * exists */
+ BFA_STATUS_IM_ADAPT_ALREADY_IN_TEAM = 114, /* Given adapter is part
+ * of another team */
+ BFA_STATUS_IM_ADAPT_HAS_VLANS = 115, /* Adapter has VLANs configured.
+ * Delete all VLANs before
+ * creating team */
+ BFA_STATUS_IM_PVID_MISMATCH = 116, /* Mismatching PVIDs configured
+ * for adapters */
+ BFA_STATUS_IM_LINK_SPEED_MISMATCH = 117, /* Mismatching link speeds
+ * configured for adapters */
+ BFA_STATUS_IM_MTU_MISMATCH = 118, /* Mismatching MTUs configured for
+ * adapters */
+ BFA_STATUS_IM_RSS_MISMATCH = 119, /* Mismatching RSS parameters
+ * configured for adapters */
+ BFA_STATUS_IM_HDS_MISMATCH = 120, /* Mismatching HDS parameters
+ * configured for adapters */
+ BFA_STATUS_IM_OFFLOAD_MISMATCH = 121, /* Mismatching offload
+ * parameters configured for
+ * adapters */
+ BFA_STATUS_IM_PORT_PARAMS = 122, /* Error setting port parameters */
+ BFA_STATUS_IM_PORT_NOT_IN_TEAM = 123, /* Port is not part of team */
+ BFA_STATUS_IM_CANNOT_REM_PRI = 124, /* Primary adapter cannot be
+ * removed. Change primary before
+ * removing */
+ BFA_STATUS_IM_MAX_PORTS_REACHED = 125, /* Exceeding maximum ports
+ * per team */
+ BFA_STATUS_IM_LAST_PORT_DELETE = 126, /* Last port in team being
+ * deleted */
+ BFA_STATUS_IM_NO_DRIVER = 127, /* IM driver is not installed */
+ BFA_STATUS_IM_MAX_VLANS_REACHED = 128, /* Exceeding maximum VLANs
+ * per port */
+ BFA_STATUS_TOMCAT_SPD_NOT_ALLOWED = 129, /* Bios speed config not
+ * allowed for CNA */
+ BFA_STATUS_NO_MINPORT_DRIVER = 130, /* Miniport driver is not
+ * loaded */
+ BFA_STATUS_CARD_TYPE_MISMATCH = 131, /* Card type mismatch */
+ BFA_STATUS_BAD_ASICBLK = 132, /* Bad ASIC block */
+ BFA_STATUS_NO_DRIVER = 133, /* Storage/Ethernet driver not loaded */
+ BFA_STATUS_INVALID_MAC = 134, /* Invalid mac address */
+ BFA_STATUS_IM_NO_VLAN = 135, /* No VLANs configured on the adapter */
+ BFA_STATUS_IM_ETH_LB_FAILED = 136, /* Ethernet loopback test failed */
+ BFA_STATUS_IM_PVID_REMOVE = 137, /* Cannot remove port vlan (PVID) */
+ BFA_STATUS_IM_PVID_EDIT = 138, /* Cannot edit port vlan (PVID) */
+ BFA_STATUS_CNA_NO_BOOT = 139, /* Boot upload not allowed for CNA */
+ BFA_STATUS_IM_PVID_NON_ZERO = 140, /* Port VLAN ID (PVID) is Set to
+ * Non-Zero Value */
+ BFA_STATUS_IM_INETCFG_LOCK_FAILED = 141, /* Acquiring Network
+ * Subsytem Lock Failed.Please
+ * try after some time */
+ BFA_STATUS_IM_GET_INETCFG_FAILED = 142, /* Acquiring Network Subsytem
+ * handle Failed. Please try
+ * after some time */
+ BFA_STATUS_IM_NOT_BOUND = 143, /* Brocade 10G Ethernet Service is not
+ * Enabled on this port */
+ BFA_STATUS_INSUFFICIENT_PERMS = 144, /* User doesn't have sufficient
+ * permissions to execute the BCU
+ * application */
+ BFA_STATUS_IM_INV_VLAN_NAME = 145, /* Invalid/Reserved Vlan name
+ * string. The name is not allowed
+ * for the normal Vlans */
+ BFA_STATUS_CMD_NOTSUPP_CNA = 146, /* Command not supported for CNA */
+ BFA_STATUS_IM_PASSTHRU_EDIT = 147, /* Can not edit passthru vlan id */
+ BFA_STATUS_IM_BIND_FAILED = 148, /*! < IM Driver bind operation
+ * failed */
+ BFA_STATUS_IM_UNBIND_FAILED = 149, /* ! < IM Driver unbind operation
+ * failed */
+ BFA_STATUS_MAX_VAL /* Unknown error code */
+};
+#define bfa_status_t enum bfa_status
+
+enum bfa_eproto_status {
+ BFA_EPROTO_BAD_ACCEPT = 0,
+ BFA_EPROTO_UNKNOWN_RSP = 1
+};
+#define bfa_eproto_status_t enum bfa_eproto_status
+
+#endif /* __BFA_DEFS_STATUS_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_tin.h patch/drivers/scsi/bfa/include/defs/bfa_defs_tin.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_tin.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_tin.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,118 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_TIN_H__
+#define __BFA_DEFS_TIN_H__
+
+#include <protocol/types.h>
+#include <protocol/fc.h>
+
+/**
+ * FCS tin states
+ */
+enum bfa_tin_state_e {
+ BFA_TIN_SM_OFFLINE = 0, /* tin is offline */
+ BFA_TIN_SM_WOS_LOGIN = 1, /* Waiting PRLI ACC/RJT from ULP */
+ BFA_TIN_SM_WFW_ONLINE = 2, /* Waiting ACK to PRLI ACC from FW */
+ BFA_TIN_SM_ONLINE = 3, /* tin login is complete */
+ BFA_TIN_SM_WIO_RELOGIN = 4, /* tin relogin is in progress */
+ BFA_TIN_SM_WIO_LOGOUT = 5, /* Processing of PRLO req from
+ * Initiator is in progress
+ */
+ BFA_TIN_SM_WOS_LOGOUT = 6, /* Processing of PRLO req from
+ * Initiator is in progress
+ */
+ BFA_TIN_SM_WIO_CLEAN = 7, /* Waiting for IO cleanup before tin
+ * is offline. This can be triggered
+ * by RPORT LOGO (rcvd/sent) or by
+ * PRLO (rcvd/sent)
+ */
+};
+
+struct bfa_prli_req_s {
+ struct fchs_s fchs;
+ struct fc_prli_s prli_payload;
+};
+
+struct bfa_prlo_req_s {
+ struct fchs_s fchs;
+ struct fc_prlo_s prlo_payload;
+};
+
+void bfa_tin_send_login_rsp(void *bfa_tin, u32 login_rsp,
+ struct fc_ls_rjt_s rjt_payload);
+void bfa_tin_send_logout_rsp(void *bfa_tin, u32 logout_rsp,
+ struct fc_ls_rjt_s rjt_payload);
+/**
+ * FCS target port statistics
+ */
+struct bfa_tin_stats_s {
+ u32 onlines; /* ITN nexus onlines (PRLI done) */
+ u32 offlines; /* ITN Nexus offlines */
+ u32 prli_req_parse_err; /* prli req parsing errors */
+ u32 prli_rsp_rjt; /* num prli rsp rejects sent */
+ u32 prli_rsp_acc; /* num prli rsp accepts sent */
+ u32 cleanup_comps; /* ITN cleanup completions */
+};
+
+/**
+ * FCS tin attributes returned in queries
+ */
+struct bfa_tin_attr_s {
+ enum bfa_tin_state_e state;
+ u8 seq_retry; /* Sequence retry supported */
+ u8 rsvd[3];
+};
+
+/**
+ * BFA TIN async event data structure for BFAL
+ */
+enum bfa_tin_aen_event {
+ BFA_TIN_AEN_ONLINE = 1, /* Target online */
+ BFA_TIN_AEN_OFFLINE = 2, /* Target offline */
+ BFA_TIN_AEN_DISCONNECT = 3, /* Target disconnected */
+};
+
+/**
+ * BFA TIN event data structure.
+ */
+struct bfa_tin_aen_data_s {
+ u16 vf_id; /* vf_id of the IT nexus */
+ u16 rsvd[3];
+ wwn_t lpwwn; /* WWN of logical port */
+ wwn_t rpwwn; /* WWN of remote(target) port */
+};
+
+/**
+ * Below APIs are needed from BFA driver
+ * Move these to BFA driver public header file?
+ */
+/* TIN rcvd new PRLI & gets bfad_tin_t ptr from driver this callback */
+void *bfad_tin_rcvd_login_req(void *bfad_tm_port, void *bfa_tin,
+ wwn_t rp_wwn, u32 rp_fcid,
+ struct bfa_prli_req_s prli_req);
+/* TIN rcvd new PRLO */
+void bfad_tin_rcvd_logout_req(void *bfad_tin, wwn_t rp_wwn, u32 rp_fcid,
+ struct bfa_prlo_req_s prlo_req);
+/* TIN is online and ready for IO */
+void bfad_tin_online(void *bfad_tin);
+/* TIN is offline and BFA driver can shutdown its upper stack */
+void bfad_tin_offline(void *bfad_tin);
+/* TIN does not need this BFA driver tin tag anymore, so can be freed */
+void bfad_tin_res_free(void *bfad_tin);
+
+#endif /* __BFA_DEFS_TIN_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h patch/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_TSENSOR_H__
+#define __BFA_DEFS_TSENSOR_H__
+
+#include <bfa_os_inc.h>
+#include <defs/bfa_defs_types.h>
+
+/**
+ * Temperature sensor status values
+ */
+enum bfa_tsensor_status {
+ BFA_TSENSOR_STATUS_UNKNOWN = 1, /* unkown status */
+ BFA_TSENSOR_STATUS_FAULTY = 2, /* sensor is faulty */
+ BFA_TSENSOR_STATUS_BELOW_MIN = 3, /* temperature below mininum */
+ BFA_TSENSOR_STATUS_NOMINAL = 4, /* normal temperature */
+ BFA_TSENSOR_STATUS_ABOVE_MAX = 5, /* temperature above maximum */
+};
+
+/**
+ * Temperature sensor attribute
+ */
+struct bfa_tsensor_attr_s {
+ enum bfa_tsensor_status status; /* temperature sensor status */
+ u32 value; /* current temperature in celsius */
+};
+
+#endif /* __BFA_DEFS_TSENSOR_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_types.h patch/drivers/scsi/bfa/include/defs/bfa_defs_types.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_types.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_types.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_TYPES_H__
+#define __BFA_DEFS_TYPES_H__
+
+#include <bfa_os_inc.h>
+
+enum bfa_boolean {
+ BFA_FALSE = 0,
+ BFA_TRUE = 1
+};
+#define bfa_boolean_t enum bfa_boolean
+
+#define BFA_STRING_32 32
+
+#endif /* __BFA_DEFS_TYPES_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_version.h patch/drivers/scsi/bfa/include/defs/bfa_defs_version.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_version.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_version.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_VERSION_H__
+#define __BFA_DEFS_VERSION_H__
+
+#define BFA_VERSION_LEN 64
+
+#endif
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_vf.h patch/drivers/scsi/bfa/include/defs/bfa_defs_vf.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_vf.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_vf.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,74 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_VF_H__
+#define __BFA_DEFS_VF_H__
+
+#include <bfa_os_inc.h>
+#include <defs/bfa_defs_port.h>
+#include <protocol/types.h>
+
+/**
+ * VF states
+ */
+enum bfa_vf_state {
+ BFA_VF_UNINIT = 0, /* fabric is not yet initialized */
+ BFA_VF_LINK_DOWN = 1, /* link is down */
+ BFA_VF_FLOGI = 2, /* flogi is in progress */
+ BFA_VF_AUTH = 3, /* authentication in progress */
+ BFA_VF_NOFABRIC = 4, /* fabric is not present */
+ BFA_VF_ONLINE = 5, /* login to fabric is complete */
+ BFA_VF_EVFP = 6, /* EVFP is in progress */
+ BFA_VF_ISOLATED = 7, /* port isolated due to vf_id mismatch */
+};
+
+/**
+ * VF statistics
+ */
+struct bfa_vf_stats_s {
+ u32 flogi_sent; /* Num FLOGIs sent */
+ u32 flogi_rsp_err; /* FLOGI response errors */
+ u32 flogi_acc_err; /* FLOGI accept errors */
+ u32 flogi_accepts; /* FLOGI accepts received */
+ u32 flogi_rejects; /* FLOGI rejects received */
+ u32 flogi_unknown_rsp; /* Unknown responses for FLOGI */
+ u32 flogi_alloc_wait; /* Allocation waits prior to
+ * sending FLOGI
+ */
+ u32 flogi_rcvd; /* FLOGIs received */
+ u32 flogi_rejected; /* Incoming FLOGIs rejected */
+ u32 fabric_onlines; /* Internal fabric online
+ * notification sent to other
+ * modules
+ */
+ u32 fabric_offlines; /* Internal fabric offline
+ * notification sent to other
+ * modules
+ */
+ u32 resvd;
+};
+
+/**
+ * VF attributes returned in queries
+ */
+struct bfa_vf_attr_s {
+ enum bfa_vf_state state; /* VF state */
+ u32 rsvd;
+ wwn_t fabric_name; /* fabric name */
+};
+
+#endif /* __BFA_DEFS_VF_H__ */
diff -urpN orig/drivers/scsi/bfa/include/defs/bfa_defs_vport.h patch/drivers/scsi/bfa/include/defs/bfa_defs_vport.h
--- orig/drivers/scsi/bfa/include/defs/bfa_defs_vport.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/defs/bfa_defs_vport.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,91 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_VPORT_H__
+#define __BFA_DEFS_VPORT_H__
+
+#include <bfa_os_inc.h>
+#include <defs/bfa_defs_port.h>
+#include <protocol/types.h>
+
+/**
+ * VPORT states
+ */
+enum bfa_vport_state {
+ BFA_FCS_VPORT_UNINIT = 0,
+ BFA_FCS_VPORT_CREATED = 1,
+ BFA_FCS_VPORT_OFFLINE = 1,
+ BFA_FCS_VPORT_FDISC_SEND = 2,
+ BFA_FCS_VPORT_FDISC = 3,
+ BFA_FCS_VPORT_FDISC_RETRY = 4,
+ BFA_FCS_VPORT_ONLINE = 5,
+ BFA_FCS_VPORT_DELETING = 6,
+ BFA_FCS_VPORT_CLEANUP = 6,
+ BFA_FCS_VPORT_LOGO_SEND = 7,
+ BFA_FCS_VPORT_LOGO = 8,
+ BFA_FCS_VPORT_ERROR = 9,
+ BFA_FCS_VPORT_MAX_STATE,
+};
+
+/**
+ * vport statistics
+ */
+struct bfa_vport_stats_s {
+ struct bfa_port_stats_s port_stats; /* base class (port) stats */
+ /*
+ * TODO - remove
+ */
+
+ u32 fdisc_sent; /* num fdisc sent */
+ u32 fdisc_accepts; /* fdisc accepts */
+ u32 fdisc_retries; /* fdisc retries */
+ u32 fdisc_timeouts; /* fdisc timeouts */
+ u32 fdisc_rsp_err; /* fdisc response error */
+ u32 fdisc_acc_bad; /* bad fdisc accepts */
+ u32 fdisc_rejects; /* fdisc rejects */
+ u32 fdisc_unknown_rsp;
+ /*
+ *!< fdisc rsp unknown error
+ */
+ u32 fdisc_alloc_wait;/* fdisc req (fcxp)alloc wait */
+
+ u32 logo_alloc_wait;/* logo req (fcxp) alloc wait */
+ u32 logo_sent; /* logo sent */
+ u32 logo_accepts; /* logo accepts */
+ u32 logo_rejects; /* logo rejects */
+ u32 logo_rsp_err; /* logo rsp errors */
+ u32 logo_unknown_rsp;
+ /* logo rsp unknown errors */
+
+ u32 fab_no_npiv; /* fabric does not support npiv */
+
+ u32 fab_offline; /* offline events from fab SM */
+ u32 fab_online; /* online events from fab SM */
+ u32 fab_cleanup; /* cleanup request from fab SM */
+ u32 rsvd;
+};
+
+/**
+ * BFA vport attribute returned in queries
+ */
+struct bfa_vport_attr_s {
+ struct bfa_port_attr_s port_attr; /* base class (port) attributes */
+ enum bfa_vport_state vport_state; /* vport state */
+ u32 rsvd;
+};
+
+#endif /* __BFA_DEFS_VPORT_H__ */
diff -urpN orig/drivers/scsi/bfa/include/fcb/bfa_fcb.h patch/drivers/scsi/bfa/include/fcb/bfa_fcb.h
--- orig/drivers/scsi/bfa/include/fcb/bfa_fcb.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/fcb/bfa_fcb.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,33 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_fcb.h BFA FCS callback interfaces
+ */
+
+#ifndef __BFA_FCB_H__
+#define __BFA_FCB_H__
+
+/**
+ * fcb Main fcs callbacks
+ */
+
+void bfa_fcb_exit(struct bfad_s *bfad);
+
+
+
+#endif /* __BFA_FCB_H__ */
diff -urpN orig/drivers/scsi/bfa/include/fcb/bfa_fcb_fcpim.h patch/drivers/scsi/bfa/include/fcb/bfa_fcb_fcpim.h
--- orig/drivers/scsi/bfa/include/fcb/bfa_fcb_fcpim.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/fcb/bfa_fcb_fcpim.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,76 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+* : bfad_fcpim.h - BFA FCS initiator mode remote port callbacks
+ */
+
+#ifndef __BFAD_FCB_FCPIM_H__
+#define __BFAD_FCB_FCPIM_H__
+
+struct bfad_itnim_s;
+
+/*
+ * RPIM callbacks
+ */
+
+/**
+ * Memory allocation for remote port instance. Called before PRLI is
+ * initiated to the remote target port.
+ *
+ * @param[in] bfad - driver instance
+ * @param[out] itnim - FCS remote port (IM) instance
+ * @param[out] itnim_drv - driver remote port (IM) instance
+ *
+ * @return None
+ */
+void bfa_fcb_itnim_alloc(struct bfad_s *bfad, struct bfa_fcs_itnim_s **itnim,
+ struct bfad_itnim_s **itnim_drv);
+
+/**
+ * Free remote port (IM) instance.
+ *
+ * @param[in] bfad - driver instance
+ * @param[in] itnim_drv - driver remote port instance
+ *
+ * @return None
+ */
+void bfa_fcb_itnim_free(struct bfad_s *bfad,
+ struct bfad_itnim_s *itnim_drv);
+
+/**
+ * Notification of when login with a remote target device is complete.
+ *
+ * @param[in] itnim_drv - driver remote port instance
+ *
+ * @return None
+ */
+void bfa_fcb_itnim_online(struct bfad_itnim_s *itnim_drv);
+
+/**
+ * Notification when login with the remote device is severed.
+ *
+ * @param[in] itnim_drv - driver remote port instance
+ *
+ * @return None
+ */
+void bfa_fcb_itnim_offline(struct bfad_itnim_s *itnim_drv);
+
+void bfa_fcb_itnim_tov_begin(struct bfad_itnim_s *itnim_drv);
+void bfa_fcb_itnim_tov(struct bfad_itnim_s *itnim_drv);
+
+#endif /* __BFAD_FCB_FCPIM_H__ */
diff -urpN orig/drivers/scsi/bfa/include/fcb/bfa_fcb_port.h patch/drivers/scsi/bfa/include/fcb/bfa_fcb_port.h
--- orig/drivers/scsi/bfa/include/fcb/bfa_fcb_port.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/fcb/bfa_fcb_port.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,113 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_fcb_port.h BFA FCS virtual port driver interfaces
+ */
+
+#ifndef __BFA_FCB_PORT_H__
+#define __BFA_FCB_PORT_H__
+
+#include <fcb/bfa_fcb_vport.h>
+/**
+ * fcs_port_fcb FCS port driver interfaces
+ */
+
+/*
+ * Forward declarations
+ */
+struct bfad_port_s;
+
+/*
+ * Callback functions from BFA FCS to driver
+ */
+
+/**
+ * Call from FCS to driver module when a port is instantiated. The port
+ * can be a base port or a virtual port with in the base fabric or
+ * a virtual fabric.
+ *
+ * On this callback, driver is supposed to create scsi_host, scsi_tgt or
+ * network interfaces bases on ports personality/roles.
+ *
+ * base port of base fabric: vf_drv == NULL && vp_drv == NULL
+ * vport of base fabric: vf_drv == NULL && vp_drv != NULL
+ * base port of VF: vf_drv != NULL && vp_drv == NULL
+ * vport of VF: vf_drv != NULL && vp_drv != NULL
+ *
+ * @param[in] bfad - driver instance
+ * @param[in] port - FCS port instance
+ * @param[in] roles - port roles: IM, TM, IP
+ * @param[in] vf_drv - VF driver instance, NULL if base fabric (no VF)
+ * @param[in] vp_drv - vport driver instance, NULL if base port
+ *
+ * @return None
+ */
+struct bfad_port_s *bfa_fcb_port_new(struct bfad_s *bfad,
+ struct bfa_fcs_port_s *port,
+ enum bfa_port_role roles, struct bfad_vf_s *vf_drv,
+ struct bfad_vport_s *vp_drv);
+
+/**
+ * Call from FCS to driver module when a port is deleted. The port
+ * can be a base port or a virtual port with in the base fabric or
+ * a virtual fabric.
+ *
+ * @param[in] bfad - driver instance
+ * @param[in] roles - port roles: IM, TM, IP
+ * @param[in] vf_drv - VF driver instance, NULL if base fabric (no VF)
+ * @param[in] vp_drv - vport driver instance, NULL if base port
+ *
+ * @return None
+ */
+void bfa_fcb_port_delete(struct bfad_s *bfad, enum bfa_port_role roles,
+ struct bfad_vf_s *vf_drv, struct bfad_vport_s *vp_drv);
+
+/**
+ * Notification when port transitions to ONLINE state.
+ *
+ * Online notification is a logical link up for the local port. This
+ * notification is sent after a successfull FLOGI, or a successful
+ * link initialization in proviate-loop or N2N topologies.
+ *
+ * @param[in] bfad - driver instance
+ * @param[in] roles - port roles: IM, TM, IP
+ * @param[in] vf_drv - VF driver instance, NULL if base fabric (no VF)
+ * @param[in] vp_drv - vport driver instance, NULL if base port
+ *
+ * @return None
+ */
+void bfa_fcb_port_online(struct bfad_s *bfad, enum bfa_port_role roles,
+ struct bfad_vf_s *vf_drv, struct bfad_vport_s *vp_drv);
+
+/**
+ * Notification when port transitions to OFFLINE state.
+ *
+ * Offline notification is a logical link down for the local port.
+ *
+ * @param[in] bfad - driver instance
+ * @param[in] roles - port roles: IM, TM, IP
+ * @param[in] vf_drv - VF driver instance, NULL if base fabric (no VF)
+ * @param[in] vp_drv - vport driver instance, NULL if base port
+ *
+ * @return None
+ */
+void bfa_fcb_port_offline(struct bfad_s *bfad, enum bfa_port_role roles,
+ struct bfad_vf_s *vf_drv, struct bfad_vport_s *vp_drv);
+
+
+#endif /* __BFA_FCB_PORT_H__ */
diff -urpN orig/drivers/scsi/bfa/include/fcb/bfa_fcb_rport.h patch/drivers/scsi/bfa/include/fcb/bfa_fcb_rport.h
--- orig/drivers/scsi/bfa/include/fcb/bfa_fcb_rport.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/fcb/bfa_fcb_rport.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,80 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_fcb_rport.h BFA FCS rport driver interfaces
+ */
+
+#ifndef __BFA_FCB_RPORT_H__
+#define __BFA_FCB_RPORT_H__
+
+/**
+ * fcs_rport_fcb Remote port driver interfaces
+ */
+
+
+struct bfad_rport_s;
+
+/*
+ * Callback functions from BFA FCS to driver
+ */
+
+/**
+ * Completion callback for bfa_fcs_rport_add().
+ *
+ * @param[in] rport_drv - driver instance of rport
+ *
+ * @return None
+ */
+void bfa_fcb_rport_add(struct bfad_rport_s *rport_drv);
+
+/**
+ * Completion callback for bfa_fcs_rport_remove().
+ *
+ * @param[in] rport_drv - driver instance of rport
+ *
+ * @return None
+ */
+void bfa_fcb_rport_remove(struct bfad_rport_s *rport_drv);
+
+/**
+ * Call to allocate a rport instance.
+ *
+ * @param[in] bfad - driver instance
+ * @param[out] rport - BFA FCS instance of rport
+ * @param[out] rport_drv - driver instance of rport
+ *
+ * @retval BFA_STATUS_OK - successfully allocated
+ * @retval BFA_STATUS_ENOMEM - cannot allocate
+ */
+bfa_status_t bfa_fcb_rport_alloc(struct bfad_s *bfad,
+ struct bfa_fcs_rport_s **rport,
+ struct bfad_rport_s **rport_drv);
+
+/**
+ * Call to free rport memory resources.
+ *
+ * @param[in] bfad - driver instance
+ * @param[in] rport_drv - driver instance of rport
+ *
+ * @return None
+ */
+void bfa_fcb_rport_free(struct bfad_s *bfad, struct bfad_rport_s **rport_drv);
+
+
+
+#endif /* __BFA_FCB_RPORT_H__ */
diff -urpN orig/drivers/scsi/bfa/include/fcb/bfa_fcb_vf.h patch/drivers/scsi/bfa/include/fcb/bfa_fcb_vf.h
--- orig/drivers/scsi/bfa/include/fcb/bfa_fcb_vf.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/fcb/bfa_fcb_vf.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,47 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_fcb_vf.h BFA FCS virtual fabric driver interfaces
+ */
+
+#ifndef __BFA_FCB_VF_H__
+#define __BFA_FCB_VF_H__
+
+/**
+ * fcs_vf_fcb Virtual fabric driver intrefaces
+ */
+
+
+struct bfad_vf_s;
+
+/*
+ * Callback functions from BFA FCS to driver
+ */
+
+/**
+ * Completion callback for bfa_fcs_vf_stop().
+ *
+ * @param[in] vf_drv - driver instance of vf
+ *
+ * @return None
+ */
+void bfa_fcb_vf_stop(struct bfad_vf_s *vf_drv);
+
+
+
+#endif /* __BFA_FCB_VF_H__ */
diff -urpN orig/drivers/scsi/bfa/include/fcb/bfa_fcb_vport.h patch/drivers/scsi/bfa/include/fcb/bfa_fcb_vport.h
--- orig/drivers/scsi/bfa/include/fcb/bfa_fcb_vport.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/fcb/bfa_fcb_vport.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,47 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_fcb_vport.h BFA FCS virtual port driver interfaces
+ */
+
+#ifndef __BFA_FCB_VPORT_H__
+#define __BFA_FCB_VPORT_H__
+
+/**
+ * fcs_vport_fcb Virtual port driver interfaces
+ */
+
+
+struct bfad_vport_s;
+
+/*
+ * Callback functions from BFA FCS to driver
+ */
+
+/**
+ * Completion callback for bfa_fcs_vport_delete().
+ *
+ * @param[in] vport_drv - driver instance of vport
+ *
+ * @return None
+ */
+void bfa_fcb_vport_delete(struct bfad_vport_s *vport_drv);
+
+
+
+#endif /* __BFA_FCB_VPORT_H__ */
diff -urpN orig/drivers/scsi/bfa/include/fcs/bfa_fcs.h patch/drivers/scsi/bfa/include/fcs/bfa_fcs.h
--- orig/drivers/scsi/bfa/include/fcs/bfa_fcs.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/fcs/bfa_fcs.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,73 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_FCS_H__
+#define __BFA_FCS_H__
+
+#include <cs/bfa_debug.h>
+#include <defs/bfa_defs_status.h>
+#include <defs/bfa_defs_version.h>
+#include <bfa.h>
+#include <fcs/bfa_fcs_fabric.h>
+
+#define BFA_FCS_OS_STR_LEN 64
+
+struct bfa_fcs_stats_s {
+ struct {
+ u32 untagged; /* untagged receive frames */
+ u32 tagged; /* tagged receive frames */
+ u32 vfid_unknown; /* VF id is unknown */
+ } uf;
+};
+
+struct bfa_fcs_driver_info_s {
+ u8 version[BFA_VERSION_LEN]; /* Driver Version */
+ u8 host_machine_name[BFA_FCS_OS_STR_LEN];
+ u8 host_os_name[BFA_FCS_OS_STR_LEN]; /* OS name and version */
+ u8 host_os_patch[BFA_FCS_OS_STR_LEN];/* patch or service pack */
+ u8 os_device_name[BFA_FCS_OS_STR_LEN]; /* Driver Device Name */
+};
+
+struct bfa_fcs_s {
+ struct bfa_s *bfa; /* corresponding BFA bfa instance */
+ struct bfad_s *bfad; /* corresponding BDA driver instance */
+ struct bfa_log_mod_s *logm; /* driver logging module instance */
+ struct bfa_trc_mod_s *trcmod; /* tracing module */
+ struct bfa_aen_s *aen; /* aen component */
+ bfa_boolean_t vf_enabled; /* VF mode is enabled */
+ bfa_boolean_t min_cfg; /* min cfg enabled/disabled */
+ u16 port_vfid; /* port default VF ID */
+ struct bfa_fcs_driver_info_s driver_info;
+ struct bfa_fcs_fabric_s fabric; /* base fabric state machine */
+ struct bfa_fcs_stats_s stats; /* FCS statistics */
+ struct bfa_wc_s wc; /* waiting counter */
+};
+
+/*
+ * bfa fcs API functions
+ */
+void bfa_fcs_init(struct bfa_fcs_s *fcs, struct bfa_s *bfa, struct bfad_s *bfad,
+ bfa_boolean_t min_cfg);
+void bfa_fcs_driver_info_init(struct bfa_fcs_s *fcs,
+ struct bfa_fcs_driver_info_s *driver_info);
+void bfa_fcs_exit(struct bfa_fcs_s *fcs);
+void bfa_fcs_trc_init(struct bfa_fcs_s *fcs, struct bfa_trc_mod_s *trcmod);
+void bfa_fcs_log_init(struct bfa_fcs_s *fcs, struct bfa_log_mod_s *logmod);
+void bfa_fcs_aen_init(struct bfa_fcs_s *fcs, struct bfa_aen_s *aen);
+void bfa_fcs_start(struct bfa_fcs_s *fcs);
+
+#endif /* __BFA_FCS_H__ */
diff -urpN orig/drivers/scsi/bfa/include/fcs/bfa_fcs_auth.h patch/drivers/scsi/bfa/include/fcs/bfa_fcs_auth.h
--- orig/drivers/scsi/bfa/include/fcs/bfa_fcs_auth.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/fcs/bfa_fcs_auth.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,82 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_FCS_AUTH_H__
+#define __BFA_FCS_AUTH_H__
+
+struct bfa_fcs_s;
+
+#include <defs/bfa_defs_status.h>
+#include <defs/bfa_defs_auth.h>
+#include <defs/bfa_defs_vf.h>
+#include <cs/bfa_q.h>
+#include <cs/bfa_sm.h>
+#include <defs/bfa_defs_pport.h>
+#include <fcs/bfa_fcs_lport.h>
+#include <protocol/fc_sp.h>
+
+struct bfa_fcs_fabric_s;
+
+
+
+struct bfa_fcs_auth_s {
+ bfa_sm_t sm; /* state machine */
+ bfa_boolean_t policy; /* authentication enabled/disabled */
+ enum bfa_auth_status status; /* authentication status */
+ enum auth_rjt_codes rjt_code; /* auth reject status */
+ enum auth_rjt_code_exps rjt_code_exp; /* auth reject reason */
+ enum bfa_auth_algo algo; /* Authentication algorithm */
+ struct bfa_auth_stats_s stats; /* Statistics */
+ enum auth_dh_gid group; /* DH(diffie-hellman) Group */
+ enum bfa_auth_secretsource source; /* Secret source */
+ char secret[BFA_AUTH_SECRET_STRING_LEN];
+ /* secret string */
+ u8 secret_len;
+ /* secret string length */
+ u8 nretries;
+ /* number of retries */
+ struct bfa_fcs_fabric_s *fabric;/* pointer to fabric */
+ u8 sentcode; /* pointer to response data */
+ u8 *response; /* pointer to response data */
+ struct bfa_timer_s delay_timer; /* delay timer */
+ struct bfa_fcxp_s *fcxp; /* pointer to fcxp */
+ struct bfa_fcxp_wqe_s fcxp_wqe;
+};
+
+/**
+ * bfa fcs authentication public functions
+ */
+bfa_status_t bfa_fcs_auth_get_attr(struct bfa_fcs_s *port,
+ struct bfa_auth_attr_s *attr);
+bfa_status_t bfa_fcs_auth_set_policy(struct bfa_fcs_s *port,
+ bfa_boolean_t policy);
+enum bfa_auth_status bfa_fcs_auth_get_status(struct bfa_fcs_s *port);
+bfa_status_t bfa_fcs_auth_set_algo(struct bfa_fcs_s *port,
+ enum bfa_auth_algo algo);
+bfa_status_t bfa_fcs_auth_get_stats(struct bfa_fcs_s *port,
+ struct bfa_auth_stats_s *stats);
+bfa_status_t bfa_fcs_auth_set_dh_group(struct bfa_fcs_s *port, int group);
+bfa_status_t bfa_fcs_auth_set_secretstring(struct bfa_fcs_s *port,
+ char *secret);
+bfa_status_t bfa_fcs_auth_set_secretstring_encrypt(struct bfa_fcs_s *port,
+ u32 secret[], u32 len);
+bfa_status_t bfa_fcs_auth_set_secretsource(struct bfa_fcs_s *port,
+ enum bfa_auth_secretsource src);
+bfa_status_t bfa_fcs_auth_reset_stats(struct bfa_fcs_s *port);
+bfa_status_t bfa_fcs_auth_reinit(struct bfa_fcs_s *port);
+
+#endif /* __BFA_FCS_AUTH_H__ */
diff -urpN orig/drivers/scsi/bfa/include/fcs/bfa_fcs_fabric.h patch/drivers/scsi/bfa/include/fcs/bfa_fcs_fabric.h
--- orig/drivers/scsi/bfa/include/fcs/bfa_fcs_fabric.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/fcs/bfa_fcs_fabric.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,112 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_FCS_FABRIC_H__
+#define __BFA_FCS_FABRIC_H__
+
+struct bfa_fcs_s;
+
+#include <defs/bfa_defs_status.h>
+#include <defs/bfa_defs_vf.h>
+#include <cs/bfa_q.h>
+#include <cs/bfa_sm.h>
+#include <defs/bfa_defs_pport.h>
+#include <fcs/bfa_fcs_lport.h>
+#include <protocol/fc_sp.h>
+#include <fcs/bfa_fcs_auth.h>
+
+/*
+ * forward declaration
+ */
+struct bfad_vf_s;
+
+enum bfa_fcs_fabric_type {
+ BFA_FCS_FABRIC_UNKNOWN = 0,
+ BFA_FCS_FABRIC_SWITCHED = 1,
+ BFA_FCS_FABRIC_PLOOP = 2,
+ BFA_FCS_FABRIC_N2N = 3,
+};
+
+
+struct bfa_fcs_fabric_s {
+ struct list_head qe; /* queue element */
+ bfa_sm_t sm; /* state machine */
+ struct bfa_fcs_s *fcs; /* FCS instance */
+ struct bfa_fcs_port_s bport; /* base logical port */
+ enum bfa_fcs_fabric_type fab_type; /* fabric type */
+ enum bfa_pport_type oper_type; /* current link topology */
+ u8 is_vf; /* is virtual fabric? */
+ u8 is_npiv; /* is NPIV supported ? */
+ u8 is_auth; /* is Security/Auth supported ? */
+ u16 bb_credit; /* BB credit from fabric */
+ u16 vf_id; /* virtual fabric ID */
+ u16 num_vports; /* num vports */
+ u16 rsvd;
+ struct list_head vport_q; /* queue of virtual ports */
+ struct list_head vf_q; /* queue of virtual fabrics */
+ struct bfad_vf_s *vf_drv; /* driver vf structure */
+ struct bfa_timer_s link_timer; /* Link Failure timer. Vport */
+ wwn_t fabric_name; /* attached fabric name */
+ bfa_boolean_t auth_reqd; /* authentication required */
+ struct bfa_timer_s delay_timer; /* delay timer */
+ union {
+ u16 swp_vfid;/* switch port VF id */
+ } event_arg;
+ struct bfa_fcs_auth_s auth; /* authentication config */
+ struct bfa_wc_s wc; /* wait counter for delete */
+ struct bfa_vf_stats_s stats; /* fabric/vf stats */
+ struct bfa_lps_s *lps; /* lport login services */
+ u8 fabric_ip_addr[BFA_FCS_FABRIC_IPADDR_SZ]; /* attached
+ * fabric's ip addr
+ */
+};
+
+#define bfa_fcs_fabric_npiv_capable(__f) (__f)->is_npiv
+#define bfa_fcs_fabric_is_switched(__f) \
+ ((__f)->fab_type == BFA_FCS_FABRIC_SWITCHED)
+
+/**
+ * The design calls for a single implementation of base fabric and vf.
+ */
+#define bfa_fcs_vf_t struct bfa_fcs_fabric_s
+
+struct bfa_vf_event_s {
+ u32 undefined;
+};
+
+/**
+ * bfa fcs vf public functions
+ */
+bfa_status_t bfa_fcs_vf_mode_enable(struct bfa_fcs_s *fcs, u16 vf_id);
+bfa_status_t bfa_fcs_vf_mode_disable(struct bfa_fcs_s *fcs);
+bfa_status_t bfa_fcs_vf_create(bfa_fcs_vf_t *vf, struct bfa_fcs_s *fcs,
+ u16 vf_id, struct bfa_port_cfg_s *port_cfg,
+ struct bfad_vf_s *vf_drv);
+bfa_status_t bfa_fcs_vf_delete(bfa_fcs_vf_t *vf);
+void bfa_fcs_vf_start(bfa_fcs_vf_t *vf);
+bfa_status_t bfa_fcs_vf_stop(bfa_fcs_vf_t *vf);
+void bfa_fcs_vf_list(struct bfa_fcs_s *fcs, u16 *vf_ids, int *nvfs);
+void bfa_fcs_vf_list_all(struct bfa_fcs_s *fcs, u16 *vf_ids, int *nvfs);
+void bfa_fcs_vf_get_attr(bfa_fcs_vf_t *vf, struct bfa_vf_attr_s *vf_attr);
+void bfa_fcs_vf_get_stats(bfa_fcs_vf_t *vf,
+ struct bfa_vf_stats_s *vf_stats);
+void bfa_fcs_vf_clear_stats(bfa_fcs_vf_t *vf);
+void bfa_fcs_vf_get_ports(bfa_fcs_vf_t *vf, wwn_t vpwwn[], int *nports);
+bfa_fcs_vf_t *bfa_fcs_vf_lookup(struct bfa_fcs_s *fcs, u16 vf_id);
+struct bfad_vf_s *bfa_fcs_vf_get_drv_vf(bfa_fcs_vf_t *vf);
+
+#endif /* __BFA_FCS_FABRIC_H__ */
diff -urpN orig/drivers/scsi/bfa/include/fcs/bfa_fcs_fcpim.h patch/drivers/scsi/bfa/include/fcs/bfa_fcs_fcpim.h
--- orig/drivers/scsi/bfa/include/fcs/bfa_fcs_fcpim.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/fcs/bfa_fcs_fcpim.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,131 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_fcs_fcpim.h BFA FCS FCP Initiator Mode interfaces/defines.
+ */
+
+#ifndef __BFA_FCS_FCPIM_H__
+#define __BFA_FCS_FCPIM_H__
+
+#include <defs/bfa_defs_status.h>
+#include <defs/bfa_defs_itnim.h>
+#include <fcs/bfa_fcs.h>
+#include <fcs/bfa_fcs_rport.h>
+#include <fcs/bfa_fcs_lport.h>
+#include <bfa_fcpim.h>
+
+/*
+ * forward declarations
+ */
+struct bfad_itnim_s;
+
+struct bfa_fcs_itnim_s {
+ bfa_sm_t sm; /* state machine */
+ struct bfa_fcs_rport_s *rport; /* parent remote rport */
+ struct bfad_itnim_s *itnim_drv; /* driver peer instance */
+ struct bfa_fcs_s *fcs; /* fcs instance */
+ struct bfa_timer_s timer; /* timer functions */
+ struct bfa_itnim_s *bfa_itnim; /* BFA itnim struct */
+ bfa_boolean_t seq_rec; /* seq recovery support */
+ bfa_boolean_t rec_support; /* REC supported */
+ bfa_boolean_t conf_comp; /* FCP_CONF support */
+ bfa_boolean_t task_retry_id; /* task retry id supp */
+ struct bfa_fcxp_wqe_s fcxp_wqe; /* wait qelem for fcxp */
+ struct bfa_fcxp_s *fcxp; /* FCXP in use */
+ struct bfa_itnim_stats_s stats; /* itn statistics */
+};
+
+
+static inline struct bfad_port_s *
+bfa_fcs_itnim_get_drvport(struct bfa_fcs_itnim_s *itnim)
+{
+ return itnim->rport->port->bfad_port;
+}
+
+
+static inline struct bfa_fcs_port_s *
+bfa_fcs_itnim_get_port(struct bfa_fcs_itnim_s *itnim)
+{
+ return itnim->rport->port;
+}
+
+
+static inline wwn_t
+bfa_fcs_itnim_get_nwwn(struct bfa_fcs_itnim_s *itnim)
+{
+ return itnim->rport->nwwn;
+}
+
+
+static inline wwn_t
+bfa_fcs_itnim_get_pwwn(struct bfa_fcs_itnim_s *itnim)
+{
+ return itnim->rport->pwwn;
+}
+
+
+static inline u32
+bfa_fcs_itnim_get_fcid(struct bfa_fcs_itnim_s *itnim)
+{
+ return itnim->rport->pid;
+}
+
+
+static inline u32
+bfa_fcs_itnim_get_maxfrsize(struct bfa_fcs_itnim_s *itnim)
+{
+ return itnim->rport->maxfrsize;
+}
+
+
+static inline enum fc_cos
+bfa_fcs_itnim_get_cos(struct bfa_fcs_itnim_s *itnim)
+{
+ return itnim->rport->fc_cos;
+}
+
+
+static inline struct bfad_itnim_s *
+bfa_fcs_itnim_get_drvitn(struct bfa_fcs_itnim_s *itnim)
+{
+ return itnim->itnim_drv;
+}
+
+
+static inline struct bfa_itnim_s *
+bfa_fcs_itnim_get_halitn(struct bfa_fcs_itnim_s *itnim)
+{
+ return itnim->bfa_itnim;
+}
+
+/**
+ * bfa fcs FCP Initiator mode API functions
+ */
+void bfa_fcs_itnim_get_attr(struct bfa_fcs_itnim_s *itnim,
+ struct bfa_itnim_attr_s *attr);
+void bfa_fcs_itnim_get_stats(struct bfa_fcs_itnim_s *itnim,
+ struct bfa_itnim_stats_s *stats);
+struct bfa_fcs_itnim_s *bfa_fcs_itnim_lookup(struct bfa_fcs_port_s *port,
+ wwn_t rpwwn);
+bfa_status_t bfa_fcs_itnim_attr_get(struct bfa_fcs_port_s *port, wwn_t rpwwn,
+ struct bfa_itnim_attr_s *attr);
+bfa_status_t bfa_fcs_itnim_stats_get(struct bfa_fcs_port_s *port, wwn_t rpwwn,
+ struct bfa_itnim_stats_s *stats);
+bfa_status_t bfa_fcs_itnim_stats_clear(struct bfa_fcs_port_s *port,
+ wwn_t rpwwn);
+#endif /* __BFA_FCS_FCPIM_H__ */
diff -urpN orig/drivers/scsi/bfa/include/fcs/bfa_fcs_fdmi.h patch/drivers/scsi/bfa/include/fcs/bfa_fcs_fdmi.h
--- orig/drivers/scsi/bfa/include/fcs/bfa_fcs_fdmi.h 1969-12-31 16:00:00.000000000 -0800
+++ patch/drivers/scsi/bfa/include/fcs/bfa_fcs_fdmi.h 2009-07-21 15:34:05.000000000 -0700
@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2005-2008 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_fcs_fdmi.h BFA fcs fdmi module public interface
+ */
+
+#ifndef __BFA_FCS_FDMI_H__
+#define __BFA_FCS_FDMI_H__
+#include <bfa_os_inc.h>
+#include <protocol/fdmi.h>
+
+#define BFA_FCS_FDMI_SUPORTED_SPEEDS (FDMI_TRANS_SPEED_1G | \
+ FDMI_TRANS_SPEED_2G | \
+ FDMI_TRANS_SPEED_4G | \
+ FDMI_TRANS_SPEED_8G)
+
+/*
+* HBA Attribute Block : BFA internal representation. Note : Some variable
+* sizes have been trimmed to suit BFA For Ex : Model will be "Brocade". Based
+ * on this the size has been reduced to 16 bytes from the standard's 64 bytes.
+ */
+struct bfa_fcs_fdmi_hba_attr_s {
+ wwn_t node_name;
+ u8 manufacturer[64];
+ u8 serial_num[64];
+ u8 model[16];
+ u8 model_desc[256];
+ u8 hw_version[8];
+ u8 driver_version[8];
+ u8 option_rom_ver[BFA_VERSION_LEN];
+ u8 fw_version[8];
+ u8 os_name[256];
+ u32 max_ct_pyld;
+};
+
+/*
+ * Port Attribute Block
+ */
+struct bfa_fcs_fdmi_port_attr_s {
+ u8 supp_fc4_types[32]; /* supported FC4 types */
+ u32 supp_speed; /* supported speed */
+ u32 curr_speed; /* current Speed */
+ u32 max_frm_size; /* max frame size */
+ u8 os_device_name[256]; /* OS device Name */
+ u8 host_name[256]; /* host name */
+};
+
+#endif /* __BFA_FCS_FDMI_H__ */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists