| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1248791026-26958-1-git-send-email-broonie@opensource.wolfsonmicro.com>
Date: Tue, 28 Jul 2009 15:23:46 +0100
From: Mark Brown <broonie@...nsource.wolfsonmicro.com>
To: Samuel Ortiz <sameo@...ux.intel.com>
Cc: linux-kernel@...r.kernel.org,
Mark Brown <broonie@...nsource.wolfsonmicro.com>,
Liam Girdwood <lrg@...mlogic.co.uk>
Subject: [PATCH] regulator: Add WM831x ISINK support
The WM831x series of PMICs provide two constant current sinks
designed to drive strings of serially connected LEDs for applications
such as backlights. This driver adds support for those regulators.
Signed-off-by: Mark Brown <broonie@...nsource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg@...mlogic.co.uk>
---
Support missing platform data for the core chip.
drivers/regulator/Makefile | 1 +
drivers/regulator/wm831x-isink.c | 260 ++++++++++++++++++++++++++++++++++++++
2 files changed, 261 insertions(+), 0 deletions(-)
create mode 100644 drivers/regulator/wm831x-isink.c
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index a0a635f..3a4cdf5 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
obj-$(CONFIG_REGULATOR_TWL4030) += twl4030-regulator.o
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
+obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
diff --git a/drivers/regulator/wm831x-isink.c b/drivers/regulator/wm831x-isink.c
new file mode 100644
index 0000000..1d8d987
--- /dev/null
+++ b/drivers/regulator/wm831x-isink.c
@@ -0,0 +1,260 @@
+/*
+ * wm831x-isink.c -- Current sink driver for the WM831x series
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@...nsource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/regulator.h>
+#include <linux/mfd/wm831x/pdata.h>
+
+#define WM831X_ISINK_MAX_NAME 7
+
+struct wm831x_isink {
+ char name[WM831X_ISINK_MAX_NAME];
+ struct regulator_desc desc;
+ int reg;
+ struct wm831x *wm831x;
+ struct regulator_dev *regulator;
+};
+
+static int wm831x_isink_enable(struct regulator_dev *rdev)
+{
+ struct wm831x_isink *isink = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = isink->wm831x;
+ int ret;
+
+ /* We have a two stage enable: first start the ISINK... */
+ ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_ENA,
+ WM831X_CS1_ENA);
+ if (ret != 0)
+ return ret;
+
+ /* ...then enable drive */
+ ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_DRIVE,
+ WM831X_CS1_DRIVE);
+ if (ret != 0)
+ wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_ENA, 0);
+
+ return ret;
+
+}
+
+static int wm831x_isink_disable(struct regulator_dev *rdev)
+{
+ struct wm831x_isink *isink = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = isink->wm831x;
+ int ret;
+
+ ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_DRIVE, 0);
+ if (ret < 0)
+ return ret;
+
+ ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_ENA, 0);
+ if (ret < 0)
+ return ret;
+
+ return ret;
+
+}
+
+static int wm831x_isink_is_enabled(struct regulator_dev *rdev)
+{
+ struct wm831x_isink *isink = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = isink->wm831x;
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, isink->reg);
+ if (ret < 0)
+ return ret;
+
+ if ((ret & (WM831X_CS1_ENA | WM831X_CS1_DRIVE)) ==
+ (WM831X_CS1_ENA | WM831X_CS1_DRIVE))
+ return 1;
+ else
+ return 0;
+}
+
+static int wm831x_isink_set_current(struct regulator_dev *rdev,
+ int min_uA, int max_uA)
+{
+ struct wm831x_isink *isink = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = isink->wm831x;
+ int ret, i;
+
+ for (i = 0; i < ARRAY_SIZE(wm831x_isinkv_values); i++) {
+ int val = wm831x_isinkv_values[i];
+ if (min_uA >= val && val <= max_uA) {
+ ret = wm831x_set_bits(wm831x, isink->reg,
+ WM831X_CS1_ISEL_MASK, i);
+ return ret;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int wm831x_isink_get_current(struct regulator_dev *rdev)
+{
+ struct wm831x_isink *isink = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = isink->wm831x;
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, isink->reg);
+ if (ret < 0)
+ return ret;
+
+ ret &= WM831X_CS1_ISEL_MASK;
+ if (ret > WM831X_ISINK_MAX_ISEL)
+ ret = WM831X_ISINK_MAX_ISEL;
+
+ return wm831x_isinkv_values[ret];
+}
+
+static struct regulator_ops wm831x_isink_ops = {
+ .is_enabled = wm831x_isink_is_enabled,
+ .enable = wm831x_isink_enable,
+ .disable = wm831x_isink_disable,
+ .set_current_limit = wm831x_isink_set_current,
+ .get_current_limit = wm831x_isink_get_current,
+};
+
+static irqreturn_t wm831x_isink_irq(int irq, void *data)
+{
+ struct wm831x_isink *isink = data;
+
+ regulator_notifier_call_chain(isink->regulator,
+ REGULATOR_EVENT_OVER_CURRENT,
+ NULL);
+
+ return IRQ_HANDLED;
+}
+
+
+static __devinit int wm831x_isink_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+ struct wm831x_isink *isink;
+ int id = pdev->id % ARRAY_SIZE(pdata->isink);
+ struct resource *res;
+ int ret, irq;
+
+ dev_dbg(&pdev->dev, "Probing ISINK%d\n", id + 1);
+
+ if (pdata == NULL || pdata->isink[id] == NULL)
+ return -ENODEV;
+
+ isink = kzalloc(sizeof(struct wm831x_isink), GFP_KERNEL);
+ if (isink == NULL) {
+ dev_err(&pdev->dev, "Unable to allocate private data\n");
+ return -ENOMEM;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "No I/O resource\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ isink->reg = res->start;
+
+ /* For current parts this is correct; probably need to revisit
+ * in future.
+ */
+ snprintf(isink->name, sizeof(isink->name), "ISINK%d", id + 1);
+ isink->desc.name = isink->name;
+ isink->desc.id = id;
+ isink->desc.ops = &wm831x_isink_ops;
+ isink->desc.type = REGULATOR_CURRENT;
+ isink->desc.owner = THIS_MODULE;
+
+ isink->regulator = regulator_register(&isink->desc, &pdev->dev,
+ pdata->isink[id], isink);
+ if (IS_ERR(isink->regulator)) {
+ ret = PTR_ERR(isink->regulator);
+ dev_err(wm831x->dev, "Failed to register ISINK%d: %d\n",
+ id + 1, ret);
+ goto err;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ ret = wm831x_request_irq(wm831x, irq, wm831x_isink_irq,
+ IRQF_TRIGGER_RISING, isink->name,
+ isink);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to request ISINK IRQ %d: %d\n",
+ irq, ret);
+ goto err_regulator;
+ }
+
+ platform_set_drvdata(pdev, isink);
+
+ return 0;
+
+err_regulator:
+ regulator_unregister(isink->regulator);
+err:
+ kfree(isink);
+ return ret;
+}
+
+static __devexit int wm831x_isink_remove(struct platform_device *pdev)
+{
+ struct wm831x_isink *isink = platform_get_drvdata(pdev);
+ struct wm831x *wm831x = isink->wm831x;
+
+ wm831x_free_irq(wm831x, platform_get_irq(pdev, 0), isink);
+
+ regulator_unregister(isink->regulator);
+ kfree(isink);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_isink_driver = {
+ .probe = wm831x_isink_probe,
+ .remove = __devexit_p(wm831x_isink_remove),
+ .driver = {
+ .name = "wm831x-isink",
+ },
+};
+
+static int __init wm831x_isink_init(void)
+{
+ int ret;
+ ret = platform_driver_register(&wm831x_isink_driver);
+ if (ret != 0)
+ pr_err("Failed to register WM831x ISINK driver: %d\n", ret);
+
+ return ret;
+}
+subsys_initcall(wm831x_isink_init);
+
+static void __exit wm831x_isink_exit(void)
+{
+ platform_driver_unregister(&wm831x_isink_driver);
+}
+module_exit(wm831x_isink_exit);
+
+/* Module information */
+MODULE_AUTHOR("Mark Brown");
+MODULE_DESCRIPTION("WM831x current sink driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-isink");
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists