| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1248936650.3313.6.camel@queen>
Date: Thu, 30 Jul 2009 08:50:50 +0200
From: Eric Sesterhenn <eric.sesterhenn@...xperts.de>
To: linux-kernel@...r.kernel.org
Subject: Warning during suspend with MS-7310 mainboard
hi,
with 2.6.31-rc4 and todays -git i get the following warning, which did not occur with 2.6.30
-rc4 is the first .31 kernel i tested on this box. This happens during test_suspend=standby during
boot. Not sure if i find the time to do a bisect, but will try.
[ 5.762460] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-8/2-8:1.0/input/input2
[ 5.762806] generic-usb 0003:046D:C03D.0003: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-8/input0
[ 5.763011] (elapsed 1.28 seconds) done.
[ 5.763108] PM: Entering standby sleep
[ 5.763149] Suspending console(s) (use no_console_suspend to debug)
[ 5.816837] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 5.817087] sd 0:0:0:0: [sda] Stopping disk
[ 6.187771] ACPI handle has no context!
[ 6.189661] parport_pc 00:06: disabled
[ 6.191359] serial 00:05: disabled
[ 6.191858] forcedeth 0000:00:0a.0: wake-up capability disabled by ACPI
[ 6.191869] forcedeth 0000:00:0a.0: PME# disabled
[ 6.191967] forcedeth 0000:00:0a.0: PCI INT A disabled
[ 6.204457] sata_nv 0000:00:08.0: PCI INT A disabled
[ 6.220225] sata_nv 0000:00:07.0: PCI INT A disabled
[ 6.236182] ata6: port disabled. ignoring.
[ 6.252516] Intel ICH 0000:00:04.0: PCI INT A disabled
[ 6.252636] ehci_hcd 0000:00:02.1: PCI INT B disabled
[ 6.252702] ohci_hcd 0000:00:02.0: PCI INT A disabled
[ 6.253037] PM: suspend devices took 0.492 seconds
[ 6.254355] ehci_hcd 0000:00:02.1: PME# disabled
[ 6.268246] ohci_hcd 0000:00:02.0: PME# disabled
[ 6.284385] ACPI: Preparing to enter system sleep state S1
[ 6.288334] Disabling non-boot CPUs ...
[ 6.292678] CPU 1 is now offline
[ 6.292682] lockdep: fixing up alternatives.
[ 6.292690] SMP alternatives: switching to UP code
[ 6.304892] CPU0 attaching NULL sched-domain.
[ 6.305021] CPU1 attaching NULL sched-domain.
[ 6.305096] CPU0 attaching NULL sched-domain.
[ 6.307651] CPU1 is down
[ 6.308116] ------------[ cut here ]------------
[ 6.308116] WARNING: at kernel/smp.c:289 smp_call_function_single+0x11a/0x1c0()
[ 6.308116] Hardware name: MS-7310
[ 6.308116] Modules linked in:
[ 6.308116] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc4-00350-g658874f #39
[ 6.308116] Call Trace:
[ 6.308116] [<ffffffff81054340>] warn_slowpath_common+0x80/0xd0
[ 6.308116] [<ffffffff81020c30>] ? query_values_on_cpu+0x0/0x70
[ 6.308116] [<ffffffff810543b2>] warn_slowpath_null+0x22/0x40
[ 6.308116] [<ffffffff8108f8fa>] smp_call_function_single+0x11a/0x1c0
[ 6.308116] [<ffffffff810209ec>] powernowk8_get+0x4c/0xa0
[ 6.308116] [<ffffffff813f5ee2>] cpufreq_suspend+0xc2/0x140
[ 6.308116] [<ffffffff812fc759>] sysdev_suspend+0xa9/0x310
[ 6.308116] [<ffffffff8109615e>] suspend_devices_and_enter+0x1be/0x230
[ 6.308116] [<ffffffff8109631a>] enter_state+0x14a/0x170
[ 6.308116] [<ffffffff81096369>] pm_suspend+0x29/0x50
[ 6.308116] [<ffffffff8178e0f2>] test_suspend+0x17a/0x1c9
[ 6.308116] [<ffffffff8178df78>] ? test_suspend+0x0/0x1c9
[ 6.308116] [<ffffffff8100907b>] do_one_initcall+0x4b/0x1a0
[ 6.308116] [<ffffffff817778c8>] kernel_init+0x164/0x1d0
[ 6.308116] [<ffffffff8100c83a>] child_rip+0xa/0x20
[ 6.308116] [<ffffffff8100c1c0>] ? restore_args+0x0/0x30
[ 6.308116] [<ffffffff81777764>] ? kernel_init+0x0/0x1d0
[ 6.308116] [<ffffffff8100c830>] ? child_rip+0x0/0x20
[ 6.308116] ---[ end trace a7919e7f17c0a727 ]---
[ 6.308116] Back to C!
[ 6.314111] Enabling non-boot CPUs ...
[ 6.315133] lockdep: fixing up alternatives.
[ 6.315139] SMP alternatives: switching to SMP code
[ 6.326277] Booting processor 1 APIC 0x1 ip 0x6000
[ 6.303707] Initializing CPU#1
[ 6.341237] Calibrating delay using timer specific routine.. 2010.34 BogoMIPS (lpj=4020681)
[ 6.341237] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 6.341237] CPU: L2 Cache: 512K (64 bytes/line)
[ 6.341237] CPU: Physical Processor ID: 0
[ 6.341237] CPU: Processor Core ID: 1
[ 6.341237] mce: CPU supports 5 MCE banks
[ 6.416276] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[ 6.416340] CPU0 attaching NULL sched-domain.
[ 6.417054] Switched to high resolution mode on CPU 1
[ 6.460106] CPU0 attaching sched-domain:
[ 6.460112] domain 0: span 0-1 level MC
[ 6.460117] groups: 0 1
[ 6.460133] CPU1 attaching sched-domain:
[ 6.460137] domain 0: span 0-1 level MC
[ 6.460142] groups: 1 0
[ 6.462076] CPU1 is up
[ 6.462083] ACPI: Waking up from system sleep state S1
[ 6.480063] ohci_hcd 0000:00:02.0: restoring config space at offset 0xf (was 0x1030100, writing 0x1030105)
[ 6.480105] ohci_hcd 0000:00:02.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00003)
[ 6.480135] ohci_hcd 0000:00:02.0: PME# disabled
[ 6.496074] ehci_hcd 0000:00:02.1: restoring config space at offset 0xf (was 0x1030200, writing 0x103020f)
[ 6.496115] ehci_hcd 0000:00:02.1: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00002)
[ 6.496147] ehci_hcd 0000:00:02.1: PME# disabled
[ 6.512100] pata_amd 0000:00:06.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00005)
[ 6.528089] sata_nv 0000:00:07.0: restoring config space at offset 0xf (was 0x1030100, writing 0x1030106)
[ 6.528130] sata_nv 0000:00:07.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00007)
[ 6.544115] sata_nv 0000:00:08.0: restoring config space at offset 0xf (was 0x1030100, writing 0x103010a)
[ 6.544154] sata_nv 0000:00:08.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00007)
[ 6.560071] forcedeth 0000:00:0a.0: restoring config space at offset 0xf (was 0x14010100, writing 0x1401010b)
[ 6.560112] forcedeth 0000:00:0a.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00007)
[ 6.561340] nForce2_smbus 0000:00:01.1: PME# disabled
[ 6.561356] ohci_hcd 0000:00:02.0: PME# disabled
[ 6.561379] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[ 6.561392] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 6.584064] ehci_hcd 0000:00:02.1: PME# disabled
[ 6.584080] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20
[ 6.584091] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 6.584166] Intel ICH 0000:00:04.0: PCI INT A -> Link[LACI] -> GSI 22 (level, low) -> IRQ 22
[ 6.584178] Intel ICH 0000:00:04.0: setting latency timer to 64
[ 6.594150] pata_amd 0000:00:06.0: setting latency timer to 64
[ 6.594262] sata_nv 0000:00:07.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 6.594274] sata_nv 0000:00:07.0: setting latency timer to 64
[ 6.594371] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
[ 6.594382] sata_nv 0000:00:08.0: setting latency timer to 64
[ 6.594424] pci 0000:00:09.0: setting latency timer to 64
[ 6.594493] forcedeth 0000:00:0a.0: wake-up capability disabled by ACPI
[ 6.594503] forcedeth 0000:00:0a.0: PME# disabled
[ 6.608440] ata6: port disabled. ignoring.
[ 6.767115] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.767281] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.772306] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 filtered out
[ 6.772313] ata1.00: ACPI cmd f5/00:00:00:00:00:00 filtered out
[ 6.772402] ata2.00: ACPI cmd ef/03:46:00:00:00:a0 filtered out
[ 6.772427] ata2.00: ACPI cmd f5/00:00:00:00:00:00 filtered out
[ 6.788330] ata2.00: configured for UDMA/100
[ 6.884030] Clocksource tsc unstable (delta = -250010099 ns)
[ 7.113182] pci 0000:05:00.0: PME# disabled
[ 7.120488] serial 00:05: activated
[ 7.129217] parport_pc 00:06: activated
[ 7.130131] sd 0:0:0:0: [sda] Starting disk
[ 7.316059] ata4: SATA link down (SStatus 0 SControl 300)
[ 7.332057] ata3: SATA link down (SStatus 0 SControl 300)
[ 11.420358] ata1.00: configured for UDMA/133
[ 11.431177] sda: detected capacity change from 0 to 250059350016
[ 11.714770] PM: resume devices took 5.152 seconds
[ 11.714775] ------------[ cut here ]------------
[ 11.714789] WARNING: at kernel/power/suspend_test.c:52 suspend_test_finish+0xa2/0xb0()
[ 11.714794] Hardware name: MS-7310
[ 11.714797] Component: resume devices
[ 11.714800] Modules linked in:
[ 11.714809] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc4-00350-g658874f #39
[ 11.714813] Call Trace:
[ 11.714826] [<ffffffff81054340>] warn_slowpath_common+0x80/0xd0
[ 11.714835] [<ffffffff8105441b>] warn_slowpath_fmt+0x4b/0x70
[ 11.714843] [<ffffffff810964d2>] suspend_test_finish+0xa2/0xb0
[ 11.714852] [<ffffffff81096075>] suspend_devices_and_enter+0xd5/0x230
[ 11.714859] [<ffffffff8109631a>] enter_state+0x14a/0x170
[ 11.714867] [<ffffffff81096369>] pm_suspend+0x29/0x50
[ 11.714876] [<ffffffff8178e0f2>] test_suspend+0x17a/0x1c9
[ 11.714884] [<ffffffff8178df78>] ? test_suspend+0x0/0x1c9
[ 11.714894] [<ffffffff8100907b>] do_one_initcall+0x4b/0x1a0
[ 11.714905] [<ffffffff817778c8>] kernel_init+0x164/0x1d0
[ 11.714914] [<ffffffff8100c83a>] child_rip+0xa/0x20
[ 11.714922] [<ffffffff8100c1c0>] ? restore_args+0x0/0x30
[ 11.714931] [<ffffffff81777764>] ? kernel_init+0x0/0x1d0
[ 11.714938] [<ffffffff8100c830>] ? child_rip+0x0/0x20
[ 11.714943] ---[ end trace a7919e7f17c0a728 ]---
[ 11.721610] PM: Finishing wakeup.
[ 11.721615] Restarting tasks ... done.
Warning is this WARN_ON_ONCE:
/*
* prevent preemption and reschedule on another processor,
* as well as CPU removal
*/
this_cpu = get_cpu();
/* Can deadlock when called with interrupts disabled */
WARN_ON_ONCE(irqs_disabled() && !oops_in_progress);
alice snakebyte # lspci
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev f3)
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2)
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev f2)
00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev f3)
00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev f3)
00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev f3)
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev f3)
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
05:00.0 VGA compatible controller: nVidia Corporation GeForce 7100 GS (rev a1)
snakebyte@...ce ~ $ cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 75
model name : AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
stepping : 2
cpu MHz : 1000.000
cache size : 512 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow rep_good extd_apicid pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy
bogomips : 2010.38
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc
processor : 1
vendor_id : AuthenticAMD
cpu family : 15
model : 75
model name : AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
stepping : 2
cpu MHz : 1000.000
cache size : 512 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow rep_good extd_apicid pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy
bogomips : 2010.38
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc
nakebyte@...ce /usr/src/linux/scripts $ bash ./ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux alice 2.6.31-rc4-00350-g658874f #39 SMP PREEMPT Thu Jul 30 08:20:46 CEST 2009 x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ AuthenticAMD GNU/Linux
Gnu C 4.4.1
Gnu make 3.81
binutils 2.19.1
util-linux ./ver_linux: line 23: fdformat: command not found
mount support
module-init-tools found
Linux C Library 2.10.1
Dynamic linker (ldd) 2.10.1
Procps 3.2.8
Kbd 1.15
Sh-utils 7.4
Modules Loaded
snakebyte@...ce /usr/src/linux/scripts $ emerge -s util-linux
Searching...
[ Results for search key : util-linux ]
[ Applications found : 1 ]
* sys-apps/util-linux
Latest version available: 2.16
Regards, Eric
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists