| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20090731004058.GA8371@oksana.dev.rtsoft.ru>
Date: Fri, 31 Jul 2009 04:40:58 +0400
From: Anton Vorontsov <avorontsov@...mvista.com>
To: Andrew Morton <akpm@...ux-foundation.org>
Cc: Ben Dooks <ben@...ff.org>,
David Brownell <dbrownell@...rs.sourceforge.net>,
David Woodhouse <dwmw2@...radead.org>,
Grant Likely <grant.likely@...retlab.ca>,
Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Jean Delvare <khali@...ux-fr.org>,
linux-mtd@...ts.infradead.org, linux-kernel@...r.kernel.org,
lm-sensors@...sensors.org, linuxppc-dev@...abs.org
Subject: [PATCH 1/6] spi: Add support for device table matching
With this patch spi drivers can use standard spi_driver.id_table and
MODULE_DEVICE_TABLE() mechanisms to bind against the devices. Just
like we do with I2C drivers.
This is useful when a single driver supports several variants of
devices but it is not possible to detect them in run-time (like
non-JEDEC chips probing in drivers/mtd/devices/m25p80.c), and
when platform_data usage is overkill.
This patch also makes life a lot easier on OpenFirmware platforms,
since with OF we extensively use proper device IDs in modaliases.
Signed-off-by: Anton Vorontsov <avorontsov@...mvista.com>
---
drivers/spi/spi.c | 23 +++++++++++++++++++++++
include/linux/mod_devicetable.h | 10 ++++++++++
include/linux/spi/spi.h | 10 ++++++++--
scripts/mod/file2alias.c | 13 +++++++++++++
4 files changed, 54 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 70845cc..8518a6e 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -59,9 +59,32 @@ static struct device_attribute spi_dev_attrs[] = {
* and the sysfs version makes coldplug work too.
*/
+static const struct spi_device_id *spi_match_id(const struct spi_device_id *id,
+ const struct spi_device *sdev)
+{
+ while (id->name[0]) {
+ if (!strcmp(sdev->modalias, id->name))
+ return id;
+ id++;
+ }
+ return NULL;
+}
+
+const struct spi_device_id *spi_get_device_id(const struct spi_device *sdev)
+{
+ const struct spi_driver *sdrv = to_spi_driver(sdev->dev.driver);
+
+ return spi_match_id(sdrv->id_table, sdev);
+}
+EXPORT_SYMBOL_GPL(spi_get_device_id);
+
static int spi_match_device(struct device *dev, struct device_driver *drv)
{
const struct spi_device *spi = to_spi_device(dev);
+ const struct spi_driver *sdrv = to_spi_driver(drv);
+
+ if (sdrv->id_table)
+ return !!spi_match_id(sdrv->id_table, spi);
return strcmp(spi->modalias, drv->name) == 0;
}
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 1bf5900..b34f1ef 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -399,6 +399,16 @@ struct i2c_device_id {
__attribute__((aligned(sizeof(kernel_ulong_t))));
};
+/* spi */
+
+#define SPI_NAME_SIZE 32
+
+struct spi_device_id {
+ char name[SPI_NAME_SIZE];
+ kernel_ulong_t driver_data /* Data private to the driver */
+ __attribute__((aligned(sizeof(kernel_ulong_t))));
+};
+
/* dmi */
enum dmi_field {
DMI_NONE,
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index c47c4b4..2b444df 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -20,6 +20,7 @@
#define __LINUX_SPI_H
#include <linux/device.h>
+#include <linux/mod_devicetable.h>
/*
* INTERFACES between SPI master-side drivers and SPI infrastructure.
@@ -86,7 +87,7 @@ struct spi_device {
int irq;
void *controller_state;
void *controller_data;
- char modalias[32];
+ char modalias[SPI_NAME_SIZE];
/*
* likely need more hooks for more protocol options affecting how
@@ -145,6 +146,7 @@ struct spi_message;
/**
* struct spi_driver - Host side "protocol" driver
+ * @id_table: List of SPI devices supported by this driver
* @probe: Binds this driver to the spi device. Drivers can verify
* that the device is actually present, and may need to configure
* characteristics (such as bits_per_word) which weren't needed for
@@ -170,6 +172,7 @@ struct spi_message;
* MMC, RTC, filesystem character device nodes, and hardware monitoring.
*/
struct spi_driver {
+ const struct spi_device_id *id_table;
int (*probe)(struct spi_device *spi);
int (*remove)(struct spi_device *spi);
void (*shutdown)(struct spi_device *spi);
@@ -732,7 +735,7 @@ struct spi_board_info {
* controller_data goes to spi_device.controller_data,
* irq is copied too
*/
- char modalias[32];
+ char modalias[SPI_NAME_SIZE];
const void *platform_data;
void *controller_data;
int irq;
@@ -800,4 +803,7 @@ spi_unregister_device(struct spi_device *spi)
device_unregister(&spi->dev);
}
+extern const struct spi_device_id *
+spi_get_device_id(const struct spi_device *sdev);
+
#endif /* __LINUX_SPI_H */
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index 40e0045..9d446e3 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -657,6 +657,15 @@ static int do_i2c_entry(const char *filename, struct i2c_device_id *id,
return 1;
}
+/* Looks like: S */
+static int do_spi_entry(const char *filename, struct spi_device_id *id,
+ char *alias)
+{
+ sprintf(alias, "%s", id->name);
+
+ return 1;
+}
+
static const struct dmifield {
const char *prefix;
int field;
@@ -853,6 +862,10 @@ void handle_moddevtable(struct module *mod, struct elf_info *info,
do_table(symval, sym->st_size,
sizeof(struct i2c_device_id), "i2c",
do_i2c_entry, mod);
+ else if (sym_is(symname, "__mod_spi_device_table"))
+ do_table(symval, sym->st_size,
+ sizeof(struct spi_device_id), "spi",
+ do_spi_entry, mod);
else if (sym_is(symname, "__mod_dmi_device_table"))
do_table(symval, sym->st_size,
sizeof(struct dmi_system_id), "dmi",
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists