| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <cdb43e8a0908020830r3ef054cbs30ee6669115e8335@mail.gmail.com>
Date: Sun, 2 Aug 2009 10:30:56 -0500
From: Jack Byer <ojbyer@....net>
To: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
Cc: linux-kernel@...r.kernel.org,
Robert Hancock <hancockrwd@...il.com>,
Alan Cox <alan@...rguk.ukuu.org.uk>,
Andreas Mohr <andi@...as.de>, linux-ide@...r.kernel.org
Subject: Re: Extremely slow IO with a PCMCIA CompactFlash adapter
> Get 2.6.31-rc5 kernel.
>
> Set:
>
> CONFIG_IDE=m
> CONFIG_BLK_DEV_IDECS=m
>
> in the kernel config.
>
> Build, install, reboot.
>
> Load ide-cs module.
>
> Enjoy the speed increase using /dev/hda.
>
> You may try "hdparm -c1 /dev/hda" for an extra enjoyment.
I still get the IRQ error, but reads are 73 kB/s without irqpoll, 580
kB/s with irqpoll. When I try to use hdparm the mount command hangs
forever.
Is there any harm with using irqpoll all the time?
Linux version 2.6.31-rc5 (root@...hium) (gcc version 4.3.2 (Gentoo
4.3.2-r3 p1.6, pie-10.1.5) ) #3 PREEMPT Sun Aug 2 09:18:46 CDT 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003bef0000 (usable)
BIOS-e820: 000000003bef0000 - 000000003beff000 (ACPI data)
BIOS-e820: 000000003beff000 - 000000003bf00000 (ACPI NVS)
BIOS-e820: 000000003bf00000 - 000000003c000000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
DMI 2.3 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==>
(reserved)
last_pfn = 0x3bef0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DAFFF uncachable
DB000-DBFFF write-protect
DC000-DFFFF write-back
E0000-E3FFF uncachable
E4000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FE0000000 write-back
1 base 020000000 mask FF0000000 write-back
2 base 030000000 mask FF8000000 write-back
3 base 038000000 mask FFC000000 write-back
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009f800 (usable)
modified: 000000000009f800 - 00000000000a0000 (reserved)
modified: 00000000000d0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000003bef0000 (usable)
modified: 000000003bef0000 - 000000003beff000 (ACPI data)
modified: 000000003beff000 - 000000003bf00000 (ACPI NVS)
modified: 000000003bf00000 - 000000003c000000 (reserved)
modified: 00000000fffc0000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 10000-15000
RAMDISK: 37205000 - 37fef8b7
Allocated new RAMDISK: 00100000 - 00eea8b7
Move RAMDISK from 0000000037205000 - 0000000037fef8b6 to 00100000 -
00eea8b6
ACPI: RSDP 000f72b0 00014 (v00 PTLTD )
ACPI: RSDT 3bef8cca 00030 (v01 PTLTD RSDT 06040000 LTP 00000000)
ACPI: FACP 3befee2b 00074 (v01 ATI Raptor 06040000 ATI 000F4240)
ACPI: DSDT 3bef8cfa 06131 (v01 ATI U1_M1535 06040000 MSFT 0100000D)
ACPI: FACS 3befffc0 00040
ACPI: BOOT 3befee9f 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SSDT 3befeec7 00139 (v01 PTLTD POWERNOW 06040000 LTP 00000001)
70MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
node 0 low ram: 00000000 - 377fe000
node 0 bootmap 00011000 - 00017f00
(7 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
0000001000]
#1 [0001000000 - 00014bd4e0] TEXT DATA BSS ==> [0001000000 -
00014bd4e0]
#2 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 -
0000100000]
#3 [00014be000 - 00014c4234] BRK ==> [00014be000 -
00014c4234]
#4 [0000010000 - 0000011000] PGTABLE ==> [0000010000 -
0000011000]
#5 [0000100000 - 0000eea8b7] NEW RAMDISK ==> [0000100000 -
0000eea8b7]
#6 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 -
0000018000]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0003bef0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0003bef0
On node 0 totalpages: 245375
free_area_init_node: node 0, pgdat c134bf80, node_mem_map c14c5200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 142 pages used for memmap
HighMem zone: 18020 pages, LIFO batch:3
Using APIC driver default
ACPI: PM-Timer IO Port: 0x8008
Local APIC disabled by BIOS -- you can enable it with "lapic"
APIC: disable apic facility
nr_irqs_gsi: 16
Allocating PCI resources starting at 3c000000 (gap: 3c000000:c3fc0000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages:
243457
Kernel command line:
PID hash table entries: 4096 (order: 12, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:0003bef0)
Memory: 953620k/981952k available (2485k kernel code, 27620k reserved,
921k data, 288k init, 72648k highmem)
virtual kernel memory layout:
fixmap : 0xfffa4000 - 0xfffff000 ( 364 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1356000 - 0xc139e000 ( 288 kB)
.data : 0xc126d565 - 0xc1353c98 ( 921 kB)
.text : 0xc1000000 - 0xc126d565 (2485 kB)
Checking if this processor honours the WP bit even in supervisor
mode...Ok.
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1,
Nodes=1
Hierarchical RCU implementation.
NR_IRQS:288
Fast TSC calibration using PIT
Detected 1788.910 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer
frequency.. 3579.89 BogoMIPS (lpj=5963033)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
mce: CPU supports 4 MCE banks
CPU: mobile AMD Athlon(tm) XP2400+ stepping 00
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090521
ACPI: setting ELCR to 0200 (from 0e28)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd87b, last bus=2
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xd4000000-0xd7ffffff]
pci 0000:00:00.0: reg 14 32bit mmio: [0xd0500000-0xd0500fff]
pci 0000:00:00.0: reg 18 io port: [0x8090-0x8093]
pci 0000:00:02.0: reg 10 32bit mmio: [0xd0006000-0xd0006fff]
pci 0000:00:02.0: PME# supported from D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:06.0: reg 10 io port: [0x8400-0x84ff]
pci 0000:00:06.0: reg 14 32bit mmio: [0xd0007000-0xd0007fff]
pci 0000:00:06.0: supports D1 D2
pci 0000:00:06.0: PME# supported from D2 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:08.0: reg 10 32bit mmio: [0xd0008000-0xd0008fff]
pci 0000:00:08.0: reg 14 io port: [0x8800-0x88ff]
pci 0000:00:08.0: PME# supported from D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:09.0: reg 10 32bit mmio: [0xd0004000-0xd0005fff]
pci 0000:00:09.0: supports D1 D2
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0a.0: reg 10 32bit mmio: [0x80000000-0x80000fff]
pci 0000:00:0a.0: supports D1 D2
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0c.0: reg 10 32bit mmio: [0xd0009000-0xd00097ff]
pci 0000:00:0c.0: reg 14 32bit mmio: [0xd0000000-0xd0003fff]
pci 0000:00:0c.0: supports D1 D2
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:0c.0: PME# disabled
pci 0000:00:10.0: reg 20 io port: [0x8080-0x808f]
pci 0000:00:11.0: quirk: region 8000-803f claimed by ali7101 ACPI
pci 0000:00:11.0: quirk: region 8040-805f claimed by ali7101 SMB
pci 0000:00:12.0: reg 10 io port: [0x8c00-0x8cff]
pci 0000:00:12.0: reg 14 32bit mmio: [0xd000a000-0xd000afff]
pci 0000:00:12.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: PME# disabled
pci 0000:01:05.0: reg 10 32bit mmio: [0xe0000000-0xefffffff]
pci 0000:01:05.0: reg 14 io port: [0x9000-0x90ff]
pci 0000:01:05.0: reg 18 32bit mmio: [0xd0100000-0xd010ffff]
pci 0000:01:05.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xd0100000-0xd01fffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xefffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 *10)
ACPI: PCI Interrupt Link [LNKB] (IRQs 7 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 10) *9
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 *10)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 7 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 10)
ACPI: PCI Interrupt Link [LNKH] (IRQs *5 7)
ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 6 10) *9
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
cfg80211: Calling CRDA to update world regulatory domain
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:07: mem resource (0xe0500000-0xe0500fff) overlaps 0000:00:01.0
BAR 9 (0xe0000000-0xefffffff), disabling
pnp 00:07: io resource (0x8004-0x8005) overlaps 0000:00:11.0 BAR 7
(0x8000-0x803f), disabling
pnp 00:07: mem resource (0xe0500000-0xe0500fff) overlaps 0000:01:05.0
BAR 0 (0xe0000000-0xefffffff), disabling
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:07: ioport range 0x40b-0x40b has been reserved
system 00:07: ioport range 0x480-0x48f has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x4d6-0x4d6 has been reserved
system 00:07: ioport range 0x8000-0x807f could not be reserved
system 00:07: ioport range 0xff00-0xff01 has been reserved
system 00:07: ioport range 0xfe00-0xfefe has been reserved
system 00:07: iomem range 0xd0500000-0xd0500fff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x9000-0x9fff
pci 0000:00:01.0: MEM window: 0xd0100000-0xd01fffff
pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xefffffff
pci 0000:00:0a.0: CardBus bridge, secondary bus 0000:02
pci 0000:00:0a.0: IO window: 0x001000-0x0010ff
pci 0000:00:0a.0: IO window: 0x001400-0x0014ff
pci 0000:00:0a.0: PREFETCH window: 0x3c000000-0x3fffffff
pci 0000:00:0a.0: MEM window: 0x40000000-0x43ffffff
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:00:0a.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) ->
IRQ 11
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
pci_bus 0000:01: resource 1 mem: [0xd0100000-0xd01fffff]
pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
pci_bus 0000:02: resource 0 io: [0x1000-0x10ff]
pci_bus 0000:02: resource 1 io: [0x1400-0x14ff]
pci_bus 0000:02: resource 2 pref mem [0x3c000000-0x3fffffff]
pci_bus 0000:02: resource 3 mem: [0x40000000-0x43ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Switched to high resolution mode on CPU 0
ACPI: EC: GPE storm detected, transactions will use polling mode
Freeing initrd memory: 14250k freed
Simple Boot Flag at 0x36 set to 0x1
Scanning for low memory corruption every 60 seconds
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
msgmni has been set to 1748
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:00:00.0: ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb
pci 0000:00:07.0: Activating ISA DMA hang workarounds
pci 0000:01:05.0: Boot video device
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Platform driver 'serial8250' needs updating - please use dev_pm_ops
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
serial 0000:00:08.0: PCI INT A -> Link[LNKG] -> GSI 3 (level, low) ->
IRQ 3
serial 0000:00:08.0: PCI INT A disabled
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
116x: driver isp116x-hcd, 03 Nov 2005
Platform driver 'isp116x-hcd' needs updating - please use dev_pm_ops
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKU] -> GSI 10 (level, low)
-> IRQ 10
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 10, io mem 0xd0006000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31-rc5 ohci_hcd
usb usb1: SerialNumber: 0000:00:02.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
sl811: driver sl811-hcd, 19 May 2005
Platform driver 'sl811-hcd' needs updating - please use dev_pm_ops
r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
Platform driver 'r8a66597_hcd' needs updating - please use dev_pm_ops
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
Platform driver 'i8042' needs updating - please use dev_pm_ops
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-devel@...hat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Netfilter messages via NETLINK v0.30.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 288k freed
Marking TSC unstable due to TSC halts in idle
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
ACPI: CPU0 (power states: C1[C1] C2[C2])
processor LNXCPU:00: registered as cooling_device0
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
b43-pci-bridge 0000:00:09.0: PCI INT A -> Link[LNKD] -> GSI 10 (level,
low) -> IRQ 10
ssb: Sonics Silicon Backplane found on PCI device 0000:00:09.0
libata version 3.00 loaded.
natsemi dp8381x driver, version 2.1, Sept 11, 2006
originally by Donald Becker <becker@...ld.com>
2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
natsemi 0000:00:12.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low)
-> IRQ 11
natsemi eth0: NatSemi DP8381[56] at 0xd000a000 (0000:00:12.0),
00:0d:9d:81:e8:17, IRQ 11, port TP.
Synaptics Touchpad, model: 1, fw: 5.8, id: 0x2348b3, caps:
0x904713/0x10008
input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input2
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
ACPI: Battery Slot [BAT1] (battery present)
input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
ali15x3_smbus 0000:00:11.0: ALI15X3_smb region uninitialized - upgrade
BIOS or use force_addr=0xaddr
ali15x3_smbus 0000:00:11.0: ALI15X3 not detected, module not inserted.
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (81 C)
pata_ali 0000:00:10.0: can't derive routing for PCI INT A
scsi0 : pata_ali
scsi1 : pata_ali
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8080 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8088 irq 15
yenta_cardbus 0000:00:0a.0: CardBus bridge found [103c:0024]
yenta_cardbus 0000:00:0a.0: O2: res at 0x94/0xD4: 00/ea
yenta_cardbus 0000:00:0a.0: O2: enabling read prefetch/write burst
ACPI: Lid Switch [LID]
ata1.00: ATA-6: ST9100823A, 3.00, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA ST9100823A 3.00 PQ: 0
ANSI: 5
ata2.00: ATAPI: DW-224E, A.0H, max MWDMA2
ata2.00: WARNING: ATAPI DMA disabled for reliablity issues. It can be
enabled
ata2.00: WARNING: via pata_ali.atapi_dma modparam or corresponding
sysfs node.
ata2.00: configured for MWDMA2
scsi 1:0:0:0: CD-ROM TEAC DW-224E A.0H PQ: 0
ANSI: 5
b43legacy-phy0: Broadcom 4306 WLAN found
phy0: Selected rate control algorithm 'minstrel'
Broadcom 43xx-legacy driver loaded [ Features: PID, Firmware-ID: FW10
]
yenta_cardbus 0000:00:0a.0: ISA IRQ mask 0x00b8, PCI irq 11
yenta_cardbus 0000:00:0a.0: Socket status: 30000811
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 5 (level, low)
-> IRQ 5
sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: unknown partition table
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sr 1:0:0:0: Attached scsi CD-ROM sr0
pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding
0x200-0x207 0x220-0x22f 0x330-0x337 0x378-0x37f 0x388-0x38f
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3c0-0x3d2: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3d4-0x3df: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x1000-0x17ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
clean.
pcmcia 0.0: pcmcia: registering new device pcmcia0.0
Uniform Multi-Platform E-IDE driver
Probing IDE interface ide0...
hda: IBM-DMDM-10340, CFA DISK drive
hdb: IBM-DMDM-10340, CFA DISK drive
ide-probe: ignoring undecoded slave
irq 3: nobody cared (try booting with the "irqpoll" option)
Pid: 1144, comm: modprobe Not tainted 2.6.31-rc5 #3
Call Trace:
[<c104e424>] ? __report_bad_irq+0x24/0x90
[<c104e5e7>] ? note_interrupt+0x157/0x1a0
[<c104edfb>] ? handle_level_irq+0xbb/0x100
[<c1004ec7>] ? handle_irq+0x17/0x20
[<c100490a>] ? do_IRQ+0x3a/0xb0
[<c1003329>] ? common_interrupt+0x29/0x30
[<c10284e5>] ? __do_softirq+0x35/0xf0
[<c104d51d>] ? handle_IRQ_event+0x2d/0xc0
[<c10285cd>] ? do_softirq+0x2d/0x40
[<c102877d>] ? irq_exit+0x5d/0x80
[<c1004913>] ? do_IRQ+0x43/0xb0
[<c1003329>] ? common_interrupt+0x29/0x30
[<c104dc3a>] ? __setup_irq+0x17a/0x2c0
[<f8450df0>] ? ide_intr+0x0/0x250 [ide_core]
[<c104de41>] ? request_threaded_irq+0xc1/0x100
[<f84547da>] ? ide_host_register+0x3ea/0x650 [ide_core]
[<f8454a6f>] ? ide_host_add+0x2f/0x70 [ide_core]
[<f846a157>] ? idecs_register+0xb7/0x160 [ide_cs]
[<f846a3a9>] ? ide_probe+0x1a9/0x2d0 [ide_cs]
[<f834ba26>] ? pcmcia_device_probe+0xf6/0x1b0 [pcmcia]
[<c10ca0f1>] ? sysfs_do_create_link+0xa1/0x140
[<c1155cd4>] ? driver_probe_device+0x74/0x180
[<c1155e61>] ? __driver_attach+0x81/0x904a0 [pcmcia]
[<f834b7b0>] ? pcmcia_device_remove+0x0/0x140 [pcmcia]
[<c1155624>] ? bus_for_each_dev+0x54/0x80
[<f834b7b0>] ? pcmcia_device_remove+0x0/0x140 [pcmcia]
[<c1155b76>] ? driver_attach+0x16/0x20
[<c1155de0>] ? __driver_attach+0x0/0x90
[<c1154eb6>] ? bus_add_driver+0xb6/0x250
[<f834b7b0>] ? pcmcia_device_remove+0x0/0x140 [pcmcia]
[<c11560d7>] ? driver_register+0x67/0x150
[<f834cb51>] ? pcmcia_register_driver+0x91/0x110 [pcmcia]
[<f846f000>] ? init_ide_cs+0x0/0xa [ide_cs]
[<c100102a>] ? _stext+0x2a/0x160
[<c104b3f3>] ? sys_init_module+0xb3/0x1f0
[<c1081cf1>] ? sys_read+0x41/0x80
[<c1002cf4>] ? sysenter_do_call+0x12/0x26
handlers:
[<f8450df0>] (ide_intr+0x0/0x250 [ide_core])
Disabling IRQ #3
ali_stimer_read: stimer is not ready.
ide0 at 0x100-0x107,0x10e on irq 3
isa bounce pool size: 16 pages
ide-cs: hda: Vpp = 0.0
ide-gd driver 1.18
hda: max request size: 128KiB
hda: 700560 sectors (358 MB) w/96KiB Cache, CHS=695/16/63
hda:
AC'97 1 does not respond - RESET
AC'97 1 access is not valid [0xffffffff], removing mixer.
ali mixer 1 creating error.
hda1
REISERFS (device dm-2): found reiserfs format "3.6" with standard journal
REISERFS (device dm-2): using ordered data mode
REISERFS (device dm-2): journal params: device dm-2, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit
age 30, max trans age 30
REISERFS (device dm-2): checking transaction log (dm-2)
REISERFS (device dm-2): replayed 15 transactions in 1 seconds
REISERFS (device dm-2): Using r5 hash to sort names
REISERFS (device dm-1): found reiserfs format "3.6" with standard journal
REISERFS (device dm-1): using ordered data mode
REISERFS (device dm-1): journal params: device dm-1, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit
age 30, max trans age 30
REISERFS (device dm-1): checking transaction log (dm-1)
REISERFS (device dm-1): replayed 19 transactions in 0 seconds
REISERFS (device dm-1): Using r5 hash to sort names
REISERFS (device dm-3): found reiserfs format "3.6" with standard journal
REISERFS (device dm-3): using ordered data mode
REISERFS (device dm-3): journal params: device dm-3, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit
age 30, max trans age 30
REISERFS (device dm-3): checking transaction log (dm-3)
REISERFS (device dm-3): replayed 17 transactions in 1 seconds
REISERFS (device dm-3): Using r5 hash to sort names
REISERFS (device dm-5): found reiserfs format "3.6" with standard journal
REISERFS (device dm-5): using ordered data mode
REISERFS (device dm-5): journal params: device dm-5, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit
age 30, max trans age 30
REISERFS (device dm-5): checking transaction log (dm-5)
REISERFS (device dm-5): replayed 17 transactions in 0 seconds
REISERFS (device dm-5): Using r5 hash to sort names
REISERFS (device dm-6): found reiserfs format "3.6" with standard journal
REISERFS (device dm-6): using ordered data mode
REISERFS (device dm-6): journal params: device dm-6, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit
age 30, max trans age 30
REISERFS (device dm-6): checking transaction log (dm-6)
REISERFS (device dm-6): replayed 15 transactions in 1 seconds
REISERFS (device dm-6): Using r5 hash to sort names
udev: starting version 141
REISERFS (device dm-4): found reiserfs format "3.6" with standard journal
REISERFS (device dm-4): using ordered data mode
REISERFS (device dm-4): journal params: device dm-4, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit
age 30, max trans age 30
REISERFS (device dm-4): checking transaction log (dm-4)
REISERFS (device dm-4): Using r5 hash to sort names
Btrfs loaded
device fsid 8b4e53f399b45375-271c8dccd0168383 devid 1 transid 85
/dev/mapper/rootfs-usr
REISERFS (device dm-8): found reiserfs format "3.6" with standard journal
REISERFS (device dm-8): using ordered data mode
REISERFS (device dm-8): journal params: device dm-8, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit
age 30, max trans age 30
REISERFS (device dm-8): checking transaction log (dm-8)
REISERFS (device dm-8): Using r5 hash to sort names
Adding 4194296k swap on /dev/mapper/rootfs-swap. Priority:-1
extents:1 across:4194296k
eth0: DSPCFG accepted after 0 usec.
eth0: link up.
eth0: Setting full-duplex based on negotiated link capability.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists