Linux version 2.6.31-rc5-00038-gcaa5018 (markus@phenom2.trippelsdorf.de) (gcc version 4.4.1 (Gentoo 4.4.1) ) #19 SMP Mon Aug 3 08:22:03 CEST 2009 Command line: BOOT_IMAGE=/boot/kernel root=/dev/sdb vga=0x323 fbcon=rotate:3 quiet KERNEL supported cpus: AMD AuthenticAMD BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000dfe90000 (usable) BIOS-e820: 00000000dfe90000 - 00000000dfea8000 (ACPI data) BIOS-e820: 00000000dfea8000 - 00000000dfed0000 (ACPI NVS) BIOS-e820: 00000000dfed0000 - 00000000dff00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 00000001a0000000 (usable) DMI present. last_pfn = 0x1a0000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000000 mask FFFF80000000 write-back 1 base 000080000000 mask FFFFC0000000 write-back 2 base 0000C0000000 mask FFFFE0000000 write-back 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 00000001a0000000 aka 6656M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xdfe90 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 Using GB pages for direct mapping init_memory_mapping: 0000000000000000-00000000dfe90000 0000000000 - 00c0000000 page 1G 00c0000000 - 00dfe00000 page 2M 00dfe00000 - 00dfe90000 page 4k kernel direct mapping tables up to dfe90000 @ 8000-b000 init_memory_mapping: 0000000100000000-00000001a0000000 0100000000 - 0180000000 page 1G 0180000000 - 01a0000000 page 2M kernel direct mapping tables up to 1a0000000 @ a000-c000 ACPI: RSDP 00000000000fb8b0 00024 (v02 ACPIAM) ACPI: XSDT 00000000dfe90100 00054 (v01 060509 XSDT1006 20090605 MSFT 00000097) ACPI: FACP 00000000dfe90290 000F4 (v03 060509 FACP1006 20090605 MSFT 00000097) ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 20090521 tbfadt-558 ACPI: DSDT 00000000dfe90440 0E6E4 (v01 A1152 A1152000 00000000 INTL 20060113) ACPI: FACS 00000000dfea8000 00040 ACPI: APIC 00000000dfe90390 0006C (v01 060509 APIC1006 20090605 MSFT 00000097) ACPI: MCFG 00000000dfe90400 0003C (v01 060509 OEMMCFG 20090605 MSFT 00000097) ACPI: OEMB 00000000dfea8040 00072 (v01 060509 OEMB1006 20090605 MSFT 00000097) ACPI: HPET 00000000dfe9f440 00038 (v01 060509 OEMHPET 20090605 MSFT 00000097) ACPI: SSDT 00000000dfe9f480 0088C (v01 A M I POWERNOW 00000001 AMD 00000001) ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 01a0000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0001547e8c] TEXT DATA BSS ==> [0001000000 - 0001547e8c] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #4 [0001548000 - 0001548290] BRK ==> [0001548000 - 0001548290] #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] #6 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000] [ffffea0000000000-ffffea0005bfffff] PMD -> [ffff880028600000-ffff88002dbfffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x001a0000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000dfe90 0: 0x00100000 -> 0x001a0000 On node 0 totalpages: 1572399 DMA zone: 56 pages used for memmap DMA zone: 102 pages reserved DMA zone: 3841 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 898760 pages, LIFO batch:31 Normal zone: 8960 pages used for memmap Normal zone: 646400 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8300 base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 Allocating PCI resources starting at dff00000 (gap: dff00000:20000000) NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 24 pages at ffff880028034000, static data 75424 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1549001 Kernel command line: BOOT_IMAGE=/boot/kernel root=/dev/sdb vga=0x323 fbcon=rotate:3 quiet PID hash table entries: 4096 (order: 12, 32768 bytes) Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Node 0: aperture @ 20000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 Memory: 6116708k/6815744k available (3321k kernel code, 526148k absent, 171964k reserved, 1422k data, 384k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 NR_IRQS:384 Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 3211.405 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled hpet clockevent registered HPET: 4 timers in total, 1 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 6422.80 BogoMIPS (lpj=3211401) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks using C1E aware idle routine Performance Counters: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic counters: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose counters: 0 ... counter mask: 000000000000000f Freeing SMP alternatives: 28k freed ACPI: Core revision 20090521 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 6421.91 BogoMIPS (lpj=3210958) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 6 MCE banks x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: AMD Phenom(tm) II X4 955 Processor stepping 02 checking TSC synchronization [CPU#0 -> CPU#1]: passed. System has AMD C1E enabled Booting processor 2 APIC 0x2 ip 0x6000 Switch to broadcast mode on CPU1 Initializing CPU#2 Calibrating delay using timer specific routine.. 6421.90 BogoMIPS (lpj=3210954) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 mce: CPU supports 6 MCE banks x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 CPU2: AMD Phenom(tm) II X4 955 Processor stepping 02 checking TSC synchronization [CPU#0 -> CPU#2]: passed. Switch to broadcast mode on CPU2 Booting processor 3 APIC 0x3 ip 0x6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 6421.90 BogoMIPS (lpj=3210950) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 mce: CPU supports 6 MCE banks x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 CPU3: AMD Phenom(tm) II X4 955 Processor stepping 02 checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs Total of 4 processors activated (25688.52 BogoMIPS). Switch to broadcast mode on CPU3 Switch to broadcast mode on CPU0 NET: Registered protocol family 16 node 0 link 0: io port [1000, ffffff] TOM: 00000000e0000000 aka 3584M Fam 10h mmconf [e0000000, efffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [e0000000, efffffff] ==> none node 0 link 0: mmio [f0000000, fbcfffff] node 0 link 0: mmio [fbd00000, fbefffff] node 0 link 0: mmio [fbf00000, ffefffff] TOM2: 00000001a0000000 aka 6656M bus: [00,07] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [a0000, bffff] bus: 00 index 2 mmio: [f0000000, ffffffff] bus: 00 index 3 mmio: [1a0000000, fcffffffff] ACPI: bus type pci registered PCI: Using configuration type 1 for base access PCI: Using configuration type 1 for extended access mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI Warning: Incorrect checksum in table [OEMB] - E9, should be E1 20090521 tbutils-246 ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:11.0: reg 10 io port: [0xc000-0xc007] pci 0000:00:11.0: reg 14 io port: [0xb000-0xb003] pci 0000:00:11.0: reg 18 io port: [0xa000-0xa007] pci 0000:00:11.0: reg 1c io port: [0x9000-0x9003] pci 0000:00:11.0: reg 20 io port: [0x8000-0x800f] pci 0000:00:11.0: reg 24 32bit mmio: [0xfbcffc00-0xfbcfffff] pci 0000:00:11.0: set SATA to AHCI mode pci 0000:00:12.0: reg 10 32bit mmio: [0xfbcfd000-0xfbcfdfff] pci 0000:00:12.1: reg 10 32bit mmio: [0xfbcfe000-0xfbcfefff] pci 0000:00:12.2: reg 10 32bit mmio: [0xfbcff800-0xfbcff8ff] pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:12.2: PME# disabled pci 0000:00:13.0: reg 10 32bit mmio: [0xfbcfb000-0xfbcfbfff] pci 0000:00:13.1: reg 10 32bit mmio: [0xfbcfc000-0xfbcfcfff] pci 0000:00:13.2: reg 10 32bit mmio: [0xfbcff400-0xfbcff4ff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled pci 0000:00:14.1: reg 10 io port: [0x00-0x07] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f] pci 0000:00:14.5: reg 10 32bit mmio: [0xfbcfa000-0xfbcfafff] pci 0000:01:05.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff] pci 0000:01:05.0: reg 14 io port: [0xd000-0xd0ff] pci 0000:01:05.0: reg 18 32bit mmio: [0xfbee0000-0xfbeeffff] pci 0000:01:05.0: reg 24 32bit mmio: [0xfbd00000-0xfbdfffff] pci 0000:01:05.0: supports D1 D2 pci 0000:01:05.1: reg 10 32bit mmio: [0xfbefc000-0xfbefffff] pci 0000:01:05.1: supports D1 D2 pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] pci 0000:00:01.0: bridge 32bit mmio: [0xfbd00000-0xfbefffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xf0000000-0xf7ffffff] pci 0000:02:05.0: reg 10 io port: [0xe800-0xe8ff] pci 0000:02:05.0: reg 14 32bit mmio: [0xfbfffc00-0xfbfffcff] pci 0000:02:05.0: reg 30 32bit mmio: [0xfbfc0000-0xfbfdffff] pci 0000:02:05.0: supports D1 D2 pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold pci 0000:02:05.0: PME# disabled pci 0000:00:14.4: transparent bridge pci 0000:00:14.4: bridge io port: [0xe000-0xefff] pci 0000:00:14.4: bridge 32bit mmio: [0xfbf00000-0xfbffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *4 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled. SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 20000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0 hpet0: 4 comparators, 32-bit 14.318180 MHz counter hpet: hpet2 irq 24 for MSI pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved system 00:08: ioport range 0x4d0-0x4d1 has been reserved system 00:08: ioport range 0x40b-0x40b has been reserved system 00:08: ioport range 0x4d6-0x4d6 has been reserved system 00:08: ioport range 0xc00-0xc01 has been reserved system 00:08: ioport range 0xc14-0xc14 has been reserved system 00:08: ioport range 0xc50-0xc51 has been reserved system 00:08: ioport range 0xc52-0xc52 has been reserved system 00:08: ioport range 0xc6c-0xc6c has been reserved system 00:08: ioport range 0xc6f-0xc6f has been reserved system 00:08: ioport range 0xcd0-0xcd1 has been reserved system 00:08: ioport range 0xcd2-0xcd3 has been reserved system 00:08: ioport range 0xcd4-0xcd5 has been reserved system 00:08: ioport range 0xcd6-0xcd7 has been reserved system 00:08: ioport range 0xcd8-0xcdf has been reserved system 00:08: ioport range 0xb00-0xb3f has been reserved system 00:08: ioport range 0x800-0x89f has been reserved system 00:08: ioport range 0xb00-0xb0f has been reserved system 00:08: ioport range 0xb20-0xb3f has been reserved system 00:08: ioport range 0x900-0x90f has been reserved system 00:08: ioport range 0x910-0x91f has been reserved system 00:08: ioport range 0xfe00-0xfefe has been reserved system 00:08: iomem range 0xffb80000-0xffbfffff has been reserved system 00:08: iomem range 0xfec10000-0xfec1001f has been reserved system 00:0a: ioport range 0x230-0x23f has been reserved system 00:0a: ioport range 0x290-0x29f has been reserved system 00:0a: ioport range 0xf40-0xf4f has been reserved system 00:0a: ioport range 0xa30-0xa3f has been reserved system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved system 00:0c: iomem range 0x0-0x9ffff could not be reserved system 00:0c: iomem range 0xc0000-0xcffff has been reserved system 00:0c: iomem range 0xe0000-0xfffff could not be reserved system 00:0c: iomem range 0x100000-0xdfefffff could not be reserved system 00:0c: iomem range 0xfec00000-0xffffffff could not be reserved pci 0000:02:05.0: BAR 6: address space collision on of device [0xfbfc0000-0xfbfdffff] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xd000-0xdfff pci 0000:00:01.0: MEM window: 0xfbd00000-0xfbefffff pci 0000:00:01.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff pci 0000:00:14.4: PCI bridge, secondary bus 0000:02 pci 0000:00:14.4: IO window: 0xe000-0xefff pci 0000:00:14.4: MEM window: 0xfbf00000-0xfbffffff pci 0000:00:14.4: PREFETCH window: 0xf8000000-0xf80fffff pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] pci_bus 0000:01: resource 1 mem: [0xfbd00000-0xfbefffff] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf7ffffff] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] pci_bus 0000:02: resource 1 mem: [0xfbf00000-0xfbffffff] pci_bus 0000:02: resource 2 pref mem [0xf8000000-0xf80fffff] pci_bus 0000:02: resource 3 io: [0x00-0xffff] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 kvm: Nested Paging enabled Btrfs loaded msgmni has been set to 11948 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:05.0: Boot video device vesafb: framebuffer at 0xf0000000, mapped to 0xffffc90000080000, using 6144k, total 16384k vesafb: mode is 1024x768x32, linelength=4096, pages=4 vesafb: scrolling: redraw vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 Console: switching to colour frame buffer device 96x64 fb0: VESA VGA frame buffer device input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] processor LNXCPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) processor LNXCPU:01: registered as cooling_device1 processor LNXCPU:02: registered as cooling_device2 processor LNXCPU:03: registered as cooling_device3 Real Time Clock Driver v1.12b Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:01:05.0: setting latency timer to 64 [drm] Initialized radeon 1.30.0 20080528 for 0000:01:05.0 on minor 0 loop: module loaded ahci 0000:00:11.0: version 3.0 ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400000 irq 22, PHY RDY changed ata2: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffd80 irq 22 ata3: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffe00 irq 22 ata4: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffe80 irq 22 pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pata_atiixp 0000:00:14.1: setting latency timer to 64 scsi4 : pata_atiixp scsi5 : pata_atiixp ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:02:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 r8169 0000:02:05.0: no PCI Express capability eth0: RTL8110s at 0xffffc9000004ac00, 00:08:54:36:f2:2f, XID 04000000 IRQ 20 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: irq 17, io mem 0xfbcff800 ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.2: debug port 1 ehci_hcd 0000:00:13.2: irq 19, io mem 0xfbcff400 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:12.0: irq 16, io mem 0xfbcfd000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.1: OHCI Host Controller ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:12.1: irq 16, io mem 0xfbcfe000 Switched to high resolution mode on CPU 3 Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 ata5.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.03, max UDMA/66 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbcfb000 ata5.00: configured for UDMA/66 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 3 ports detected ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.1: irq 18, io mem 0xfbcfc000 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 3 ports detected ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:14.5: OHCI Host Controller ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbcfa000 ata2: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-7: OCZ-VERTEX, 1.30, max UDMA/133 ata3.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32) ata3.00: configured for UDMA/133 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: No PS/2 controller found. Probing ports directly. Platform driver 'i8042' needs updating - please use dev_pm_ops serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice i2c /dev entries driver it87: Found IT8720F chip at 0x290, revision 2 it87: in3 is VCC (+5V) it87: in7 is VCCH (+5V Stand-By) ACPI: I/O resource it87 [0x295-0x296] conflicts with ACPI region ECRE [0x290-0x2af] ACPI: Device needs an ACPI driver cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.20. usbcore: registered new interface driver snd-usb-audio ALSA device list: No soundcards found. Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ctnetlink v0.93: registering with nfnetlink. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 17 powernow-k8: Found 1 AMD Phenom(tm) II X4 955 Processor processors (4 cpu cores) (version 2.20.00) powernow-k8: 0 : pstate 0 (3200 MHz) powernow-k8: 1 : pstate 1 (2500 MHz) powernow-k8: 2 : pstate 2 (2100 MHz) powernow-k8: 3 : pstate 3 (800 MHz) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA7 ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 usb 3-1: new low speed USB device using ohci_hcd and address 2 scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 2:0:0:0: Direct-Access ATA OCZ-VERTEX 1.30 PQ: 0 ANSI: 5 sd 2:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: Attached scsi generic sg1 type 0 sdb: unknown partition table sd 2:0:0:0: [sdb] Attached SCSI disk scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 1.03 PQ: 0 ANSI: 5 sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 sr 4:0:0:0: Attached scsi generic sg2 type 5 usb 3-1: configuration #1 chosen from 1 choice input: HID 046a:0021 as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input2 generic-usb 0003:046A:0021.0001: input: USB HID v1.11 Keyboard [HID 046a:0021] on usb-0000:00:12.0-1/input0 input: HID 046a:0021 as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/input/input3 generic-usb 0003:046A:0021.0002: input: USB HID v1.11 Device [HID 046a:0021] on usb-0000:00:12.0-1/input1 UDF-fs: No partition found (1) device fsid 24acb49a33a0128-36271e4d907182af devid 1 transid 14448 /dev/root Btrfs detected SSD devices, enabling SSD mode VFS: Mounted root (btrfs filesystem) readonly on device 0:11. Freeing unused kernel memory: 384k freed usb 3-2: new full speed USB device using ohci_hcd and address 3 usb 3-2: configuration #1 chosen from 1 choice input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input4 generic-usb 0003:046D:C526.0003: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-2/input0 input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/input/input5 generic-usb 0003:046D:C526.0004: input: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-2/input1 udev: starting version 141 udev: renamed network interface eth0 to eth1 usb 4-1: new full speed USB device using ohci_hcd and address 2 usb 4-1: configuration #1 chosen from 1 choice input: C-Media USB Headphone Set as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.3/input/input6 generic-usb 0003:0D8C:000C.0005: input: USB HID v1.00 Device [C-Media USB Headphone Set ] on usb-0000:00:12.1-1/input3 EXT4-fs (sda1): barriers enabled kjournald2 starting: pid 1641, dev sda1:8, commit interval 60 seconds EXT4-fs (sda1): internal journal on sda1:8 EXT4-fs (sda1): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (sda1): mounted filesystem with ordered data mode device fsid e748a9e74d2be943-b791eed7a4940096 devid 1 transid 11343 /dev/sda2 Adding 524280k swap on /var/spool/swapfile. Priority:-1 extents:1 across:524280k r8169: eth1: link up [drm] Setting GART location based on new memory map [drm] Loading RS780 CP Microcode [drm] Loading RS780 PFP Microcode [drm] Resetting GPU [drm] writeback test succeeded in 1 usecs