Linux version 2.6.30.4 (root@arnold) (gcc version 4.3.3 (GCC) ) #5 SMP PREEMPT Wed Aug 5 00:16:38 CEST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) DMI 2.3 present. last_pfn = 0x7fff0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CAFFF write-protect CB000-EFFFF uncachable F0000-F7FFF write-through F8000-F8FFF uncachable F9000-FFFFF write-through MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 0E0000000 mask FFC000000 write-combining 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 7000-c000 ACPI: RSDP 000f75e0 00014 (v00 VIA694) ACPI: RSDT 7fff3000 0002C (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000) ACPI: FACP 7fff3040 00074 (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000) ACPI: DSDT 7fff30c0 02B9C (v01 VIA694 AWRDACPI 00001000 MSFT 0100000C) ACPI: FACS 7fff0000 00040 ACPI: APIC 7fff5c80 0005C (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000) ACPI: Local APIC address 0xfee00000 1159MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 node 0 low ram: 00000000 - 377fe000 node 0 bootmap 00008000 - 0000ef00 (8 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 0000515350] TEXT DATA BSS ==> [0000100000 - 0000515350] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [0000516000 - 00005180ae] BRK ==> [0000516000 - 00005180ae] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] found SMP MP-table at [c00f5bb0] f5bb0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0007fff0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007fff0 On node 0 totalpages: 524175 free_area_init_node: node 0, pgdat c047a7e0, node_mem_map c1000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 2320 pages used for memmap HighMem zone: 294626 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 12 pages at c200a000, static data 27940 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520079 Kernel command line: auto BOOT_IMAGE=Desktop ro root=306 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Preemptible RCU implementation. NR_IRQS:320 CPU 0 irqstacks, hard=c200a000 soft=c200b000 PID hash table entries: 4096 (order: 12, 16384 bytes) Fast TSC calibration using PIT Detected 1469.897 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing HighMem for node 0 (000377fe:0007fff0) Memory: 2074208k/2097088k available (2504k kernel code, 21544k reserved, 1132k data, 284k init, 1187784k highmem) virtual kernel memory layout: fixmap : 0xfff9e000 - 0xfffff000 ( 388 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc0492000 - 0xc04d9000 ( 284 kB) .data : 0xc037232f - 0xc048d360 (1132 kB) .text : 0xc0100000 - 0xc037232f (2504 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Calibrating delay loop (skipped), value calculated using timer frequency.. 2940.28 BogoMIPS (lpj=4899656) Mount-cache hash table entries: 512 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. ACPI: Core revision 20090320 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Pentium(R) III CPU family 1400MHz stepping 01 CPU 1 irqstacks, hard=c201a000 soft=c201b000 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 2940.28 BogoMIPS (lpj=4899655) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Pentium(R) III CPU family 1400MHz stepping 01 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (5881.56 BogoMIPS). net_namespace: 504 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 for base access mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: your CPUs had inconsistent variable MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe3ffffff] pci 0000:00:01.0: supports D1 pci 0000:00:08.0: reg 10 32bit mmio: [0xef108000-0xef108fff] pci 0000:00:08.0: reg 14 io port: [0xa000-0xa03f] pci 0000:00:08.0: reg 18 32bit mmio: [0xef000000-0xef0fffff] pci 0000:00:08.0: reg 30 32bit mmio: [0x000000-0x0fffff] pci 0000:00:08.0: supports D1 D2 pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:08.0: PME# disabled pci 0000:00:0a.0: reg 10 io port: [0xa400-0xa4ff] pci 0000:00:0a.0: reg 14 32bit mmio: [0xef10b000-0xef10b0ff] pci 0000:00:0a.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:00:0a.0: supports D1 D2 pci 0000:00:0a.0: PME# supported from D1 D2 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:0b.0: reg 10 32bit mmio: [0xef10d000-0xef10d7ff] pci 0000:00:0b.0: reg 14 32bit mmio: [0xef100000-0xef103fff] pci 0000:00:0b.0: supports D2 pci 0000:00:0b.0: PME# supported from D2 D3hot pci 0000:00:0b.0: PME# disabled pci 0000:00:0c.0: reg 10 io port: [0xa800-0xa87f] pci 0000:00:0c.0: supports D2 pci 0000:00:0c.1: reg 10 io port: [0xac00-0xac0f] pci 0000:00:0c.1: supports D1 pci 0000:00:0c.1: PME# supported from D1 D3hot pci 0000:00:0c.1: PME# disabled pci 0000:00:0e.0: reg 20 io port: [0xb000-0xb01f] pci 0000:00:0e.0: supports D1 D2 pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot pci 0000:00:0e.0: PME# disabled pci 0000:00:0e.1: reg 20 io port: [0xb400-0xb41f] pci 0000:00:0e.1: supports D1 D2 pci 0000:00:0e.1: PME# supported from D0 D1 D2 D3hot pci 0000:00:0e.1: PME# disabled pci 0000:00:0e.2: reg 10 32bit mmio: [0xef109000-0xef1090ff] pci 0000:00:0e.2: supports D1 D2 pci 0000:00:0e.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:0e.2: PME# disabled pci 0000:00:0f.0: reg 10 io port: [0xb800-0xb8ff] pci 0000:00:0f.0: reg 14 64bit mmio: [0xef10a000-0xef10a3ff] pci 0000:00:0f.0: reg 1c 64bit mmio: [0xef104000-0xef105fff] pci 0000:00:0f.0: reg 30 32bit mmio: [0x000000-0x00ffff] pci 0000:00:0f.0: supports D1 D2 pci 0000:00:0f.1: reg 10 io port: [0xbc00-0xbcff] pci 0000:00:0f.1: reg 14 64bit mmio: [0xef10c000-0xef10c3ff] pci 0000:00:0f.1: reg 1c 64bit mmio: [0xef106000-0xef107fff] pci 0000:00:0f.1: reg 30 32bit mmio: [0x000000-0x00ffff] pci 0000:00:0f.1: supports D1 D2 pci 0000:00:11.1: reg 20 io port: [0xc000-0xc00f] pci 0000:00:11.3: reg 20 io port: [0xc800-0xc81f] pci 0000:00:11.4: reg 20 io port: [0xcc00-0xcc1f] pci 0000:01:00.0: reg 10 32bit mmio: [0xec000000-0xecffffff] pci 0000:01:00.0: reg 14 32bit mmio: [0xe4000000-0xe7ffffff] pci 0000:01:00.0: reg 18 32bit mmio: [0xe8000000-0xe807ffff] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] pci 0000:00:01.0: bridge 32bit mmio: [0xec000000-0xedffffff] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe4000000-0xebffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: mem resource (0xce800-0xcffff) overlaps 0000:00:08.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xf0000-0xf7fff) overlaps 0000:00:08.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xf8000-0xfbfff) overlaps 0000:00:08.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xfc000-0xfffff) overlaps 0000:00:08.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:08.0 BAR 6 (0x0-0xfffff), disabling pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0x7fff0000-0x7fffffff could not be reserved system 00:00: iomem range 0xffff0000-0xffffffff has been reserved system 00:00: iomem range 0x100000-0x7ffeffff could not be reserved system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved system 00:02: ioport range 0xb78-0xb7b has been reserved system 00:02: ioport range 0xf78-0xf7b has been reserved system 00:02: ioport range 0xa78-0xa7b has been reserved system 00:02: ioport range 0xe78-0xe7b has been reserved system 00:02: ioport range 0xbbc-0xbbf has been reserved system 00:02: ioport range 0xfbc-0xfbf has been reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:02: ioport range 0x294-0x297 has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xec000000-0xedffffff pci 0000:00:01.0: PREFETCH window: 0x000000e4000000-0x000000ebffffff pci 0000:00:01.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 1 mem: [0xec000000-0xedffffff] pci_bus 0000:01: resource 2 pref mem [0xe4000000-0xebffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 highmem bounce pool size: 64 pages NTFS driver 2.1.29 [Flags: R/W]. msgmni has been set to 1733 alg: No test for stdrng (krng) io scheduler noop registered io scheduler cfq registered (default) pci 0000:00:01.0: disabling DAC on VIA PCI bridge pci 0000:00:08.0: Firmware left e100 interrupts enabled; disabling pci 0000:01:00.0: Boot video device vesafb: framebuffer at 0xe4000000, mapped to 0xf8080000, using 3072k, total 65536k vesafb: mode is 1024x768x16, linelength=2048, pages=0 vesafb: protected mode interface info at c000:b7a0 vesafb: pmi: set display start = c00cb7e5, set palette = c00cb86a vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SLPB] processor ACPI_CPU:00: registered as cooling_device0 processor ACPI_CPU:01: registered as cooling_device1 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (51 C) Real Time Clock Driver v1.12b Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 brd: module loaded loop: module loaded Uniform Multi-Platform E-IDE driver via82cxxx 0000:00:11.1: VIA vt8233 (rev 00) IDE UDMA100 via82cxxx 0000:00:11.1: IDE controller (0x1106:0x0571 rev 0x06) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 VIA_IDE 0000:00:11.1: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 VIA_IDE 0000:00:11.1: VIA VLink IRQ fixup, from 255 to 10 via82cxxx 0000:00:11.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xc000-0xc007 ide1: BM-DMA at 0xc008-0xc00f Probing IDE interface ide0... Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 hda: ST340016A, ATA DISK drive hdb: SAMSUNG HD400LD, ATA DISK drive hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdb: UDMA/100 mode selected Probing IDE interface ide1... hdc: _NEC DVD_RW ND-3540A, ATAPI CD/DVD-ROM drive hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdc: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 hda: max request size: 128KiB hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63 hda: cache flushes not supported hda: hda1 hda2 < hda5 hda6 hda7 hda8 > hdb: max request size: 512KiB hdb: 781422768 sectors (400088 MB) w/8192KiB Cache, CHS=48641/255/63 hdb: cache flushes supported hdb: hdb1 ide-cd driver 5.00 ide-cd: hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 sym53c8xx 0000:00:0f.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 sym0: <1010-33> rev 0x1 at pci 0000:00:0f.0 irq 19 sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: handling phase mismatch from SCRIPTS. sym0: SCSI BUS has been reset. scsi0 : sym-2.2.3 sym53c8xx 0000:00:0f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 sym1: <1010-33> rev 0x1 at pci 0000:00:0f.1 irq 19 sym1: Symbios NVRAM, ID 7, Fast-80, SE, parity checking sym1: open drain IRQ line driver, using on-chip SRAM sym1: using LOAD/STORE-based firmware. sym1: handling phase mismatch from SCRIPTS. sym1: SCSI BUS has been reset. sym1: SCSI BUS mode change from SE to SE. scsi1 : sym-2.2.3 sym1: SCSI BUS has been reset. Driver 'sd' needs updating - please use bus_type methods e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation e100 0000:00:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 e100 0000:00:08.0: PME# disabled e100: eth0: e100_probe: addr 0xef108000, irq 16, MAC addr 00:10:dc:5a:ab:49 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 r8169 0000:00:0a.0: no PCI Express capability eth1: RTL8110s at 0xf8028000, 00:11:95:5d:05:3a, XID 04000000 IRQ 18 ohci1394 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[ef10d000-ef10d7ff] Max Packet=[2048] IR/IT contexts=[4/8] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:0e.2: PCI INT C -> GSI 16 (level, low) -> IRQ 16 ehci_hcd 0000:00:0e.2: EHCI Host Controller ehci_hcd 0000:00:0e.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0e.2: irq 16, io mem 0xef109000 ehci_hcd 0000:00:0e.2: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:0e.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:0e.0: UHCI Host Controller uhci_hcd 0000:00:0e.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:0e.0: irq 18, io base 0x0000b000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:0e.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:0e.1: UHCI Host Controller uhci_hcd 0000:00:0e.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:0e.1: irq 19, io base 0x0000b400 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 uhci_hcd 0000:00:11.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:11.3: UHCI Host Controller uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:11.3: irq 11, io base 0x0000c800 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:11.4: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:11.4: UHCI Host Controller uhci_hcd 0000:00:11.4: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:11.4: irq 11, io base 0x0000cc00 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu Advanced Linux Sound Architecture Driver Version 1.0.20. FM801 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 usb 1-4: new high speed USB device using ehci_hcd and address 2 ALSA device list: #0: ForteMedia FM801-AU at 0xa800, irq 16 nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode usb 1-4: configuration #1 chosen from 1 choice scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. ieee1394: Host added: ID:BUS[0-00:1023] GUID[37200856000015c2] kjournald starting. Commit interval 5 seconds EXT3-fs: hda6: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 358015 EXT3-fs: hda6: 1 orphan inode deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly on device 3:6. Freeing unused kernel memory: 284k freed Linux agpgart interface v0.103 agpgart: Detected VIA Pro266T chipset agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000 scsi 2:0:0:0: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0 usb-storage: device scan complete sd 2:0:0:0: [sda] Attached SCSI removable disk EXT3 FS on hda6, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. e100 0000:00:08.0: firmware: using built-in firmware e100/d101m_ucode.bin r8169: eth1: link up e100: eth0 NIC Link is Up 100 Mbps Full Duplex