| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 12 Aug 2009 13:10:18 +0200
From: Sascha Hauer <s.hauer@...gutronix.de>
To: Dmitry Torokhov <dmitry.torokhov@...il.com>
Cc: linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.arm.linux.org.uk,
Mark Brown <broonie@...nsource.wolfsonmicro.com>,
linux-input@...r.kernel.org
Subject: Re: [PATCH 2/5] [input] add mc13783 touchscreen driver
Hi Dmitry
On Tue, Aug 11, 2009 at 07:15:33PM -0700, Dmitry Torokhov wrote:
> Hi Sascha,
>
> On Tue, Aug 11, 2009 at 11:07:44AM +0200, Sascha Hauer wrote:
> > This driver provides support for the touchscreen interface
> > integrated into the Freescale MC13783.
> >
> > Signed-off-by: Sascha Hauer <s.hauer@...gutronix.de>
> > Cc: Dmitry Torokhov <dmitry.torokhov@...il.com>
> > Cc: Mark Brown <broonie@...nsource.wolfsonmicro.com>
> > Cc: linux-input@...r.kernel.org
> > ---
> > drivers/input/touchscreen/Kconfig | 12 ++
> > drivers/input/touchscreen/Makefile | 1 +
> > drivers/input/touchscreen/mc13783_ts.c | 228 ++++++++++++++++++++++++++++++++
> > 3 files changed, 241 insertions(+), 0 deletions(-)
> > create mode 100644 drivers/input/touchscreen/mc13783_ts.c
> >
> > diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
> > index 72e2712..7451cf0 100644
> > --- a/drivers/input/touchscreen/Kconfig
> > +++ b/drivers/input/touchscreen/Kconfig
> > @@ -413,6 +413,18 @@ config TOUCHSCREEN_USB_COMPOSITE
> > To compile this driver as a module, choose M here: the
> > module will be called usbtouchscreen.
> >
> > +config TOUCHSCREEN_MC13783
> > + tristate "Freescale MC13783 touchscreen input driver"
> > + depends on MFD_MC13783
> > + help
> > + Say Y here if you have an Freescale MC13783 PMIC on your
> > + board and want to use its touchscreen
> > +
> > + If unsure, say N.
> > +
> > + To compile this driver as a module, choose M here: the
> > + module will be called mxc_ts.
> > +
> > config TOUCHSCREEN_USB_EGALAX
> > default y
> > bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
> > diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
> > index 3e1c5e0..7b79598 100644
> > --- a/drivers/input/touchscreen/Makefile
> > +++ b/drivers/input/touchscreen/Makefile
> > @@ -20,6 +20,7 @@ obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o
> > obj-$(CONFIG_TOUCHSCREEN_MIGOR) += migor_ts.o
> > obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o
> > obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o
> > +obj-$(CONFIG_TOUCHSCREEN_MC13783) += mc13783_ts.o
> > obj-$(CONFIG_TOUCHSCREEN_HP600) += hp680_ts_input.o
> > obj-$(CONFIG_TOUCHSCREEN_HP7XX) += jornada720_ts.o
> > obj-$(CONFIG_TOUCHSCREEN_HTCPEN) += htcpen.o
> > diff --git a/drivers/input/touchscreen/mc13783_ts.c b/drivers/input/touchscreen/mc13783_ts.c
> > new file mode 100644
> > index 0000000..9dfe280
> > --- /dev/null
> > +++ b/drivers/input/touchscreen/mc13783_ts.c
> > @@ -0,0 +1,228 @@
> > +/*
> > + * Driver for the Freescale Semiconductor MC13783 touchscreen.
> > + *
> > + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
> > + * Copyright (C) 2009 Sascha Hauer, Pengutronix
> > + *
> > + * Initial development of this code was funded by
> > + * Phytec Messtechnik GmbH, http://www.phytec.de
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License
> > + * as published by the Free Software Foundation; either version 2
> > + * of the License, or (at your option) any later version.
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License along with
> > + * this program; if not, write to the Free Software Foundation, Inc., 51
> > + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> > + *
> > + */
> > +
> > +#include <linux/mfd/mc13783-private.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/mfd/mc13783.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/delay.h>
> > +#include <linux/input.h>
> > +#include <linux/sched.h>
> > +#include <linux/init.h>
> > +
> > +#define MC13783_TS_NAME "mc13783-ts"
> > +
> > +struct mc13783_ts_priv {
> > + struct input_dev *idev;
> > + struct mc13783 *mc13783;
> > + struct delayed_work work;
> > + struct workqueue_struct *workq;
> > + unsigned int sample[4];
> > +};
> > +
> > +static inline void mc13783_ts_start_conversion(struct mc13783_ts_priv *priv)
> > +{
> > + unsigned int reg_adc0, reg_adc1;
> > +
> > + reg_adc0 = MC13783_ADC0_ADREFEN | MC13783_ADC0_ADREFMODE
> > + | MC13783_ADC0_TSMOD0 | MC13783_ADC0_TSMOD1
> > + | MC13783_ADC0_ADINC1 | MC13783_ADC0_ADINC2;
> > + reg_adc1 = MC13783_ADC1_ADEN | MC13783_ADC1_ADSEL | MC13783_ADC1_ADA22
> > + | MC13783_ADC1_ASC | MC13783_ADC1_ADTRIGIGN;
> > +
> > + mc13783_reg_write(priv->mc13783, MC13783_REG_ADC_0, reg_adc0);
> > + mc13783_reg_write(priv->mc13783, MC13783_REG_ADC_1, reg_adc1);
> > +}
>
> I do not see this function used...
>
> > +
> > +static inline void mc13783_ts_set_irq_mode(struct mc13783_ts_priv *priv)
> > +{
> > + unsigned int reg_adc0, reg_adc1;
> > +
> > + reg_adc0 = MC13783_ADC0_ADREFEN | MC13783_ADC0_ADREFMODE
> > + | MC13783_ADC0_TSMOD0;
> > + reg_adc1 = MC13783_ADC1_ADEN | MC13783_ADC1_ADTRIGIGN;
> > +
> > + mc13783_reg_write(priv->mc13783, MC13783_REG_ADC_0, reg_adc0);
> > + mc13783_reg_write(priv->mc13783, MC13783_REG_ADC_1, reg_adc1);
> > +}
>
> Nor this one...
>
> > +
> > +#define TS_MIN 1
> > +#define TS_MAX 1000
> > +
> > +static void mc13783_ts_handler(int irq, void *data)
> > +{
> > + struct mc13783_ts_priv *priv = data;
> > + unsigned int sts;
> > +
> > + mc13783_reg_read(priv->mc13783, MC13783_REG_INTERRUPT_STATUS_0, &sts);
> > + mc13783_reg_write(priv->mc13783, MC13783_REG_INTERRUPT_STATUS_0,
> > + sts & MC13783_INT_STAT_TSI);
> > +
> > + if (sts & MC13783_INT_STAT_TSI)
> > + queue_work(priv->workq, &priv->work.work);
>
> Do not expose the innards of delayed_work, simply do:
>
> queue_delayed_work(priv->workq, &priv->work, 0);
Ok
>
> > +}
> > +
> > +static void mc13783_ts_report_sample(struct mc13783_ts_priv *priv)
> > +{
> > + int x, y, press = 0;
> > +
> > + x = (priv->sample[2] >> 2) & 0x3ff;
> > + y = (priv->sample[3] >> 2) & 0x3ff;
> > +
> > + pr_debug("mc13783_ts: x: %d y: %d\n", x, y);
> > +
> > + if (x > TS_MIN && x < TS_MAX && y > TS_MIN && y < TS_MAX) {
> > + press = 1;
> > + input_report_abs(priv->idev, ABS_X, x);
> > + input_report_abs(priv->idev, ABS_Y, y);
> > +
> > + queue_delayed_work(priv->workq, &priv->work, HZ / 50);
> > + }
> > +
> > + input_report_abs(priv->idev, ABS_PRESSURE, press);
>
> This device does not appear to privide pressure readings, use BTN_TOUCH
> alone to indicate touches instead of fake ABS_PRESSURE event. Yes, I
> know that older versions of tslib only recognize ABS_PRESSURE...
In fact no released version of tslib supports this :( Anyway, fixed.
>
> > + input_sync(priv->idev);
> > +}
> > +
> > +static void mc13783_ts_work(struct work_struct *work)
> > +{
> > + struct mc13783_ts_priv *priv =
> > + container_of(work, struct mc13783_ts_priv, work.work);
> > + unsigned int mode = MC13783_ADC_MODE_TS;
> > + unsigned int channel = 12;
> > + int ret;
> > +
> > + ret = mc13783_adc_do_conversion
> > + (priv->mc13783, mode, channel, priv->sample);
> > +
> > + if (!ret)
> > + mc13783_ts_report_sample(priv);
> > +}
> > +
> > +static int __init mc13783_ts_probe(struct platform_device *pdev)
>
> No __inits on probe() methods, they are normally __devinit.
Ok
>
> > +{
> > + struct mc13783_ts_priv *priv;
> > + struct input_dev *idev;
> > + int ret;
> > +
> > + priv = kzalloc(sizeof(*priv), GFP_KERNEL);
> > + if (!priv)
> > + return -ENOMEM;
> > +
> > + priv->mc13783 = pdev->dev.platform_data;
> > +
> > + idev = input_allocate_device();
> > + if (!idev) {
> > + ret = -ENOMEM;
> > + goto err_input_alloc;
> > + }
> > +
> > + priv->idev = idev;
> > + idev->name = MC13783_TS_NAME;
> > + idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
> > + idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
> > + idev->absbit[0] = BIT_MASK(ABS_X) | BIT_MASK(ABS_Y) |
> > + BIT_MASK(ABS_PRESSURE);
> > +
>
> It is usually a good idea to indicate the range of reported values with
> input_set_abs_params().
Fixed
>
> > + platform_set_drvdata(pdev, priv);
> > +
> > + ret = mc13783_register_irq(priv->mc13783, MC13783_IRQ_TS,
> > + mc13783_ts_handler, priv);
> > + if (ret)
> > + goto err_failed_irq;
> > +
> > + ret = input_register_device(priv->idev);
> > + if (ret) {
> > + dev_err(&pdev->dev,
> > + "register input device failed with %d\n", ret);
> > + goto err_failed_register;
> > + }
> > +
> > + /* unmask the ts wakeup interrupt */
> > + mc13783_set_bits(priv->mc13783, MC13783_REG_INTERRUPT_MASK_0,
> > + MC13783_INT_MASK_TSM, 0);
> > +
> > + mc13783_adc_set_ts_status(priv->mc13783, 1);
> > +
> > + INIT_DELAYED_WORK(&priv->work, mc13783_ts_work);
> > +
> > + priv->workq = create_singlethread_workqueue("mc13783_ts");
>
> Do you really need a separate workqueue? Would not keventd suffice?
Yes, I do. mc13783_adc_do_conversion() runs in a workqueue aswell. With
keventd I would deadlock.
>
> > + queue_delayed_work(priv->workq, &priv->work, HZ / 20);
>
> Starting of the contoller is better done in input_dev->open() method when
> there are uses as opposed to probe() method.
Ok
>
> > +
> > + return 0;
> > +
> > +err_failed_register:
> > + mc13783_free_irq(priv->mc13783, MC13783_IRQ_TS);
> > +err_failed_irq:
> > + input_free_device(priv->idev);
> > +err_input_alloc:
> > + kfree(priv);
> > +
> > + return ret;
> > +}
> > +
> > +static int __devexit mc13783_ts_remove(struct platform_device *pdev)
> > +{
> > + struct mc13783_ts_priv *priv = platform_get_drvdata(pdev);
> > +
> > + mc13783_adc_set_ts_status(priv->mc13783, 0);
> > +
> > + mc13783_free_irq(priv->mc13783, MC13783_IRQ_TS);
> > +
> > + cancel_delayed_work(&priv->work);
> > + destroy_workqueue(priv->workq);
> > +
> > + input_unregister_device(priv->idev);
> > + input_free_device(priv->idev);
>
> input_free_device() is verboten after unregister.
Ok
>
> > +
> > + kfree(priv);
> > +
> > + return 0;
> > +}
> > +
> > +static struct platform_driver mc13783_ts_driver = {
> > + .probe = mc13783_ts_probe,
> > + .remove = __devexit_p(mc13783_ts_remove),
>
> Whitespace damage.
Fixed
>
> > + .driver = {
> > + .owner = THIS_MODULE,
> > + .name = MC13783_TS_NAME,
> > + },
> > +};
> > +
> > +static int __init mc13783_ts_init(void)
> > +{
> > + return platform_driver_register(&mc13783_ts_driver);
> > +}
> > +
> > +static void __exit mc13783_ts_exit(void)
> > +{
> > + platform_driver_unregister(&mc13783_ts_driver);
> > +}
> > +
> > +module_init(mc13783_ts_init);
> > +module_exit(mc13783_ts_exit);
> > +
> > +MODULE_DESCRIPTION("MC13783 input touchscreen driver");
> > +MODULE_AUTHOR("Sascha Hauer, <s.hauer@...gutronix.de>");
> > +MODULE_LICENSE("GPL");
>
> MODULE_ALIAS()?
Added
Thanks for reviewing
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists