Currently the clock rate calculation may round as pleased, which means that it is possible that we will round down and end up with a faster clock rate than intended. Change the calculation to use DIV_ROUND_UP() to ensure that we end up with a clock rate either the same as or lower than the user requested one. Signed-off-by: Ben Dooks --- drivers/spi/spi_s3c24xx.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) Index: b/drivers/spi/spi_s3c24xx.c =================================================================== --- a/drivers/spi/spi_s3c24xx.c 2009-07-14 13:56:07.000000000 +0100 +++ b/drivers/spi/spi_s3c24xx.c 2009-07-14 14:08:45.000000000 +0100 @@ -111,6 +111,7 @@ static int s3c24xx_spi_setupxfer(struct unsigned int bpw; unsigned int hz; unsigned int div; + unsigned long clk; bpw = t ? t->bits_per_word : spi->bits_per_word; hz = t ? t->speed_hz : spi->max_speed_hz; @@ -120,20 +121,16 @@ static int s3c24xx_spi_setupxfer(struct return -EINVAL; } - div = clk_get_rate(hw->clk) / hz; - - /* is clk = pclk / (2 * (pre+1)), or is it - * clk = (pclk * 2) / ( pre + 1) */ - - div /= 2; - - if (div > 0) - div -= 1; + clk = clk_get_rate(hw->clk); + div = DIV_ROUND_UP(clk, hz * 2) - 1; if (div > 255) div = 255; - dev_dbg(&spi->dev, "setting pre-scaler to %d (hz %d)\n", div, hz); + dev_dbg(&spi->dev, "setting pre-scaler to %d (wanted %d, got %ld)\n", + div, hz, clk / (2 * (div + 1))); + + writeb(div, hw->regs + S3C2410_SPPRE); spin_lock(&hw->bitbang.lock); -- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/