From: Martin Schwidefsky The three inline functions clocksource_read, clocksource_enable and clocksource_disable are simple wrappers of an indirect call plus the copy from and to the mult_orig value. The functions are exclusively used by the timekeeping code which has intimate knowledge of the clocksource anyway. Therefore remove the inline functions. No functional change. Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Daniel Walker Acked-by: John Stultz Signed-off-by: Martin Schwidefsky --- include/linux/clocksource.h | 58 -------------------------------------------- kernel/time/timekeeping.c | 41 +++++++++++++++++++++---------- 2 files changed, 28 insertions(+), 71 deletions(-) Index: linux-2.6/kernel/time/timekeeping.c =================================================================== --- linux-2.6.orig/kernel/time/timekeeping.c +++ linux-2.6/kernel/time/timekeeping.c @@ -79,7 +79,7 @@ static void clocksource_forward_now(void cycle_t cycle_now, cycle_delta; s64 nsec; - cycle_now = clocksource_read(clock); + cycle_now = clock->read(clock); cycle_delta = (cycle_now - clock->cycle_last) & clock->mask; clock->cycle_last = cycle_now; @@ -114,7 +114,7 @@ void getnstimeofday(struct timespec *ts) *ts = xtime; /* read clocksource: */ - cycle_now = clocksource_read(clock); + cycle_now = clock->read(clock); /* calculate the delta since the last update_wall_time: */ cycle_delta = (cycle_now - clock->cycle_last) & clock->mask; @@ -146,7 +146,7 @@ ktime_t ktime_get(void) nsecs = xtime.tv_nsec + wall_to_monotonic.tv_nsec; /* read clocksource: */ - cycle_now = clocksource_read(clock); + cycle_now = clock->read(clock); /* calculate the delta since the last update_wall_time: */ cycle_delta = (cycle_now - clock->cycle_last) & clock->mask; @@ -186,7 +186,7 @@ void ktime_get_ts(struct timespec *ts) tomono = wall_to_monotonic; /* read clocksource: */ - cycle_now = clocksource_read(clock); + cycle_now = clock->read(clock); /* calculate the delta since the last update_wall_time: */ cycle_delta = (cycle_now - clock->cycle_last) & clock->mask; @@ -274,16 +274,29 @@ static void change_clocksource(void) clocksource_forward_now(); - if (clocksource_enable(new)) + if (new->enable && ! new->enable(new)) return; + /* + * The frequency may have changed while the clocksource + * was disabled. If so the code in ->enable() must update + * the mult value to reflect the new frequency. Make sure + * mult_orig follows this change. + */ + new->mult_orig = new->mult; new->raw_time = clock->raw_time; old = clock; clock = new; - clocksource_disable(old); + /* + * Save mult_orig in mult so that the value can be restored + * regardless if ->enable() updates the value of mult or not. + */ + old->mult = old->mult_orig; + if (old->disable) + old->disable(old); clock->cycle_last = 0; - clock->cycle_last = clocksource_read(clock); + clock->cycle_last = clock->read(clock); clock->error = 0; clock->xtime_nsec = 0; clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH); @@ -373,7 +386,7 @@ void getrawmonotonic(struct timespec *ts seq = read_seqbegin(&xtime_lock); /* read clocksource: */ - cycle_now = clocksource_read(clock); + cycle_now = clock->read(clock); /* calculate the delta since the last update_wall_time: */ cycle_delta = (cycle_now - clock->cycle_last) & clock->mask; @@ -435,9 +448,12 @@ void __init timekeeping_init(void) ntp_init(); clock = clocksource_get_next(); - clocksource_enable(clock); + if (clock->enable) + clock->enable(clock); + /* set mult_orig on enable */ + clock->mult_orig = clock->mult; clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH); - clock->cycle_last = clocksource_read(clock); + clock->cycle_last = clock->read(clock); xtime.tv_sec = sec; xtime.tv_nsec = 0; @@ -477,8 +493,7 @@ static int timekeeping_resume(struct sys } update_xtime_cache(0); /* re-base the last cycle value */ - clock->cycle_last = 0; - clock->cycle_last = clocksource_read(clock); + clock->cycle_last = clock->read(clock); clock->error = 0; timekeeping_suspended = 0; write_sequnlock_irqrestore(&xtime_lock, flags); @@ -630,7 +645,7 @@ void update_wall_time(void) return; #ifdef CONFIG_GENERIC_TIME - offset = (clocksource_read(clock) - clock->cycle_last) & clock->mask; + offset = (clock->read(clock) - clock->cycle_last) & clock->mask; #else offset = clock->cycle_interval; #endif Index: linux-2.6/include/linux/clocksource.h =================================================================== --- linux-2.6.orig/include/linux/clocksource.h +++ linux-2.6/include/linux/clocksource.h @@ -268,64 +268,6 @@ static inline u32 clocksource_hz2mult(u3 } /** - * clocksource_read: - Access the clocksource's current cycle value - * @cs: pointer to clocksource being read - * - * Uses the clocksource to return the current cycle_t value - */ -static inline cycle_t clocksource_read(struct clocksource *cs) -{ - return cs->read(cs); -} - -/** - * clocksource_enable: - enable clocksource - * @cs: pointer to clocksource - * - * Enables the specified clocksource. The clocksource callback - * function should start up the hardware and setup mult and field - * members of struct clocksource to reflect hardware capabilities. - */ -static inline int clocksource_enable(struct clocksource *cs) -{ - int ret = 0; - - if (cs->enable) - ret = cs->enable(cs); - - /* - * The frequency may have changed while the clocksource - * was disabled. If so the code in ->enable() must update - * the mult value to reflect the new frequency. Make sure - * mult_orig follows this change. - */ - cs->mult_orig = cs->mult; - - return ret; -} - -/** - * clocksource_disable: - disable clocksource - * @cs: pointer to clocksource - * - * Disables the specified clocksource. The clocksource callback - * function should power down the now unused hardware block to - * save power. - */ -static inline void clocksource_disable(struct clocksource *cs) -{ - /* - * Save mult_orig in mult so clocksource_enable() can - * restore the value regardless if ->enable() updates - * the value of mult or not. - */ - cs->mult = cs->mult_orig; - - if (cs->disable) - cs->disable(cs); -} - -/** * cyc2ns - converts clocksource cycles to nanoseconds * @cs: Pointer to clocksource * @cycles: Cycles -- blue skies, Martin. "Reality continues to ruin my life." - Calvin. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/