From: Martin Schwidefsky The clocksource structure has two multipliers, the unmodified multiplier clock->mult_orig and the NTP corrected multiplier clock->mult. The NTP multiplier is misplaced in the struct clocksource, this is private information of the timekeeping code. Add the mult field to the struct timekeeper to contain the NTP corrected value, keep the unmodifed multiplier in clock->mult and remove clock->mult_orig. Cc: Ingo Molnar Cc: Thomas Gleixner Cc: john stultz Cc: Daniel Walker Signed-off-by: Martin Schwidefsky --- arch/arm/plat-omap/common.c | 7 +---- include/linux/clocksource.h | 4 --- kernel/time/timekeeping.c | 53 +++++++++++++++++++------------------------- 3 files changed, 27 insertions(+), 37 deletions(-) Index: linux-2.6/include/linux/clocksource.h =================================================================== --- linux-2.6.orig/include/linux/clocksource.h +++ linux-2.6/include/linux/clocksource.h @@ -149,8 +149,7 @@ extern u64 timecounter_cyc2time(struct t * @disable: optional function to disable the clocksource * @mask: bitmask for two's complement * subtraction of non 64 bit counters - * @mult: cycle to nanosecond multiplier (adjusted by NTP) - * @mult_orig: cycle to nanosecond multiplier (unadjusted by NTP) + * @mult: cycle to nanosecond multiplier * @shift: cycle to nanosecond divisor (power of two) * @flags: flags describing special properties * @vread: vsyscall based read @@ -168,7 +167,6 @@ struct clocksource { void (*disable)(struct clocksource *cs); cycle_t mask; u32 mult; - u32 mult_orig; u32 shift; unsigned long flags; cycle_t (*vread)(void); Index: linux-2.6/kernel/time/timekeeping.c =================================================================== --- linux-2.6.orig/kernel/time/timekeeping.c +++ linux-2.6/kernel/time/timekeeping.c @@ -41,6 +41,8 @@ struct timekeeper { /* Shift conversion between clock shifted nano seconds and * ntp shifted nano seconds. */ int ntp_error_shift; + /* NTP adjusted clock multiplier */ + u32 mult; }; struct timekeeper timekeeper; @@ -66,8 +68,8 @@ static void timekeeper_setup_internals(s /* Do the ns -> cycle conversion first, using original mult */ tmp = NTP_INTERVAL_LENGTH; tmp <<= clock->shift; - tmp += clock->mult_orig/2; - do_div(tmp, clock->mult_orig); + tmp += clock->mult/2; + do_div(tmp, clock->mult); if (tmp == 0) tmp = 1; @@ -77,13 +79,20 @@ static void timekeeper_setup_internals(s /* Go back from cycles -> shifted ns */ timekeeper.xtime_interval = (u64) interval * clock->mult; timekeeper.raw_interval = - ((u64) interval * clock->mult_orig) >> clock->shift; + ((u64) interval * clock->mult) >> clock->shift; timekeeper.xtime_nsec = 0; timekeeper.shift = clock->shift; timekeeper.ntp_error = 0; timekeeper.ntp_error_shift = NTP_SCALE_SHIFT - clock->shift; + + /* + * The timekeeper keeps its own mult values for the currently + * active clocksource. These value will be adjusted via NTP + * to counteract clock drifting. + */ + timekeeper.mult = clock->mult; } /* @@ -154,14 +163,15 @@ static void timekeeping_forward_now(void cycle_delta = (cycle_now - clock->cycle_last) & clock->mask; clock->cycle_last = cycle_now; - nsec = clocksource_cyc2ns(cycle_delta, clock->mult, clock->shift); + nsec = clocksource_cyc2ns(cycle_delta, timekeeper.mult, + timekeeper.shift); /* If arch requires, add in gettimeoffset() */ nsec += arch_gettimeoffset(); timespec_add_ns(&xtime, nsec); - nsec = clocksource_cyc2ns(cycle_delta, clock->mult_orig, clock->shift); + nsec = clocksource_cyc2ns(cycle_delta, clock->mult, clock->shift); timespec_add_ns(&raw_time, nsec); } @@ -193,8 +203,8 @@ void getnstimeofday(struct timespec *ts) cycle_delta = (cycle_now - clock->cycle_last) & clock->mask; /* convert to nanoseconds: */ - nsecs = clocksource_cyc2ns(cycle_delta, clock->mult, - clock->shift); + nsecs = clocksource_cyc2ns(cycle_delta, timekeeper.mult, + timekeeper.shift); /* If arch requires, add in gettimeoffset() */ nsecs += arch_gettimeoffset(); @@ -228,8 +238,8 @@ ktime_t ktime_get(void) cycle_delta = (cycle_now - clock->cycle_last) & clock->mask; /* convert to nanoseconds: */ - nsecs += clocksource_cyc2ns(cycle_delta, clock->mult, - clock->shift); + nsecs += clocksource_cyc2ns(cycle_delta, timekeeper.mult, + timekeeper.shift); } while (read_seqretry(&xtime_lock, seq)); /* @@ -271,8 +281,8 @@ void ktime_get_ts(struct timespec *ts) cycle_delta = (cycle_now - clock->cycle_last) & clock->mask; /* convert to nanoseconds: */ - nsecs = clocksource_cyc2ns(cycle_delta, clock->mult, - clock->shift); + nsecs = clocksource_cyc2ns(cycle_delta, timekeeper.mult, + timekeeper.shift); } while (read_seqretry(&xtime_lock, seq)); @@ -356,22 +366,10 @@ static void change_clocksource(void) if (new->enable && ! new->enable(new)) return; - /* - * The frequency may have changed while the clocksource - * was disabled. If so the code in ->enable() must update - * the mult value to reflect the new frequency. Make sure - * mult_orig follows this change. - */ - new->mult_orig = new->mult; old = timekeeper.clock; timekeeper_setup_internals(new); - /* - * Save mult_orig in mult so that the value can be restored - * regardless if ->enable() updates the value of mult or not. - */ - old->mult = old->mult_orig; if (old->disable) old->disable(old); @@ -461,7 +459,7 @@ void getrawmonotonic(struct timespec *ts cycle_delta = (cycle_now - clock->cycle_last) & clock->mask; /* convert to nanoseconds: */ - nsecs = clocksource_cyc2ns(cycle_delta, clock->mult_orig, + nsecs = clocksource_cyc2ns(cycle_delta, clock->mult, clock->shift); *ts = raw_time; @@ -521,9 +519,6 @@ void __init timekeeping_init(void) clock = clocksource_default_clock(); if (clock->enable) clock->enable(clock); - /* set mult_orig on enable */ - clock->mult_orig = clock->mult; - timekeeper_setup_internals(clock); xtime.tv_sec = sec; @@ -697,7 +692,7 @@ static void timekeeping_adjust(s64 offse } else return; - timekeeper.clock->mult += adj; + timekeeper.mult += adj; timekeeper.xtime_interval += interval; timekeeper.xtime_nsec -= offset; timekeeper.ntp_error -= (interval - offset) << @@ -788,7 +783,7 @@ void update_wall_time(void) timekeeper.ntp_error += timekeeper.xtime_nsec << timekeeper.ntp_error_shift; - nsecs = clocksource_cyc2ns(offset, clock->mult, clock->shift); + nsecs = clocksource_cyc2ns(offset, timekeeper.mult, timekeeper.shift); update_xtime_cache(nsecs); /* check to see if there is a new clocksource to use */ Index: linux-2.6/arch/arm/plat-omap/common.c =================================================================== --- linux-2.6.orig/arch/arm/plat-omap/common.c +++ linux-2.6/arch/arm/plat-omap/common.c @@ -253,11 +253,8 @@ static struct clocksource clocksource_32 */ unsigned long long sched_clock(void) { - unsigned long long ret; - - ret = (unsigned long long)clocksource_32k.read(&clocksource_32k); - ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift; - return ret; + return clocksource_cyc2ns(clocksource_32k.read(&clocksource_32k), + clocksource_32k.mult, clocksource_32k.shift); } static int __init omap_init_clocksource_32k(void) -- blue skies, Martin. "Reality continues to ruin my life." - Calvin. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/