Linux version 2.6.31-rc5 (root@aragorn) (gcc version 4.3.4 (Debian 4.3.4-1) ) #16 SMP Fri Aug 14 18:30:07 CEST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved) BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS) BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ef40000 (usable) BIOS-e820: 000000001ef40000 - 000000001ef50000 (ACPI data) BIOS-e820: 000000001ef50000 - 000000001f000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved) DMI 2.3 present. last_pfn = 0x1ef40 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DFFFF uncachable E0000-E7FFF write-protect E8000-EFFFF write-back F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0FEDA0000 mask FFFFE0000 write-back 1 base 01F000000 mask FFF000000 uncachable 2 base 0FFF00000 mask FFFF00000 uncachable 3 base 000000000 mask FE0000000 write-back 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106 e820 update range: 000000001f000000 - 00000000feda0000 (usable) ==> (reserved) initial memory mapped : 0 - 01800000 init_memory_mapping: 0000000000000000-000000001ef40000 0000000000 - 0000400000 page 4k 0000400000 - 001ec00000 page 2M 001ec00000 - 001ef40000 page 4k kernel direct mapping tables up to 1ef40000 @ 7000-c000 RAMDISK: 1eb62000 - 1ef2f9c4 ACPI: RSDP 000f0180 00014 (v00 TOSHIB) ACPI: RSDT 1ef40000 00038 (v01 TOSHIB 750 00970814 TASM 04010000) ACPI: FACP 1ef40060 00084 (v02 TOSHIB 750 20030101 TASM 04010000) ACPI: DSDT 1ef40558 04B72 (v01 TOSHIB A000C 20031216 MSFT 0100000E) ACPI: FACS 000eee00 00040 ACPI: SSDT 1ef402ca 00082 (v01 TOSHIB A000C 20030917 MSFT 0100000E) ACPI: DBGP 1ef400e4 00034 (v01 TOSHIB 750 00970814 TASM 04010000) ACPI: BOOT 1ef40038 00028 (v01 TOSHIB 750 00970814 TASM 04010000) ACPI: APIC 1ef40118 00062 (v01 TOSHIB 750 00970814 TASM 04010000) ACPI: Local APIC address 0xfee00000 0MB HIGHMEM available. 495MB LOWMEM available. mapped low ram: 0 - 1ef40000 low ram: 0 - 1ef40000 node 0 low ram: 00000000 - 1ef40000 node 0 bootmap 00002000 - 00005de8 (9 early reservations) ==> bootmem [0000000000 - 001ef40000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0001000000 - 000141fc94] TEXT DATA BSS ==> [0001000000 - 000141fc94] #4 [001eb62000 - 001ef2f9c4] RAMDISK ==> [001eb62000 - 001ef2f9c4] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #6 [0001420000 - 00014261b0] BRK ==> [0001420000 - 00014261b0] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x0001ef40 HighMem 0x0001ef40 -> 0x0001ef40 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0001ef40 On node 0 totalpages: 126687 free_area_init_node: node 0, pgdat c134abc0, node_mem_map c1427000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 959 pages used for memmap Normal zone: 121729 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0xd808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 1 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 00000000000ee000 PM: Registered nosave memory: 00000000000ee000 - 00000000000ef000 PM: Registered nosave memory: 00000000000ef000 - 0000000000100000 Allocating PCI resources starting at 1f000000 (gap: 1f000000:dfc00000) NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 11 pages at c1809000, static data 21468 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125696 Kernel command line: root=/dev/mapper/strider-root ro vga=791 quiet PID hash table entries: 2048 (order: 11, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Initializing HighMem for node 0 (00000000:00000000) Memory: 493912k/507136k available (2288k kernel code, 12640k reserved, 1180k data, 312k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff1f000 - 0xfffff000 ( 896 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xdf740000 - 0xff7fe000 ( 512 MB) lowmem : 0xc0000000 - 0xdef40000 ( 495 MB) .init : 0xc136b000 - 0xc13b9000 ( 312 kB) .data : 0xc123c20a - 0xc1363338 (1180 kB) .text : 0xc1000000 - 0xc123c20a (2288 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. NR_IRQS:512 Fast TSC calibration using PIT Detected 2793.024 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.04 BogoMIPS (lpj=11172096) Security Framework initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Hyper-Threading is disabled mce: CPU supports 4 MCE banks CPU0: Thermal monitoring enabled (TM1) Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20090521 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 Brought up 1 CPUs Total of 1 processors activated (5586.04 BogoMIPS). CPU0 attaching NULL sched-domain. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd2fe, last bus=3 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI Warning: Package List length (F) larger than NumElements count (2), truncated 20090521 dsobject-502 ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function ACPI: Power Resource [PFAN] (off) ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Scanning bus 0000:00 pci 0000:00:00.0: found [8086:3580] class 000600 header type 00 pci 0000:00:00.0: calling asus_hides_smbus_hostbridge+0x0/0x20f pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x182 pci 0000:00:00.0: calling pci_fixup_transparent_bridge+0x0/0x4a pci 0000:00:00.1: found [8086:3584] class 000880 header type 00 pci 0000:00:00.1: calling quirk_resource_alignment+0x0/0x182 pci 0000:00:00.1: calling pci_fixup_transparent_bridge+0x0/0x4a pci 0000:00:00.3: found [8086:3585] class 000880 header type 00 pci 0000:00:00.3: calling quirk_resource_alignment+0x0/0x182 pci 0000:00:00.3: calling pci_fixup_transparent_bridge+0x0/0x4a pci 0000:00:02.0: found [8086:3582] class 000300 header type 00 pci 0000:00:02.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff] pci 0000:00:02.0: reg 14 32bit mmio: [0xd0000000-0xd007ffff] pci 0000:00:02.0: reg 18 io port: [0xeff8-0xefff] pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x182 pci 0000:00:02.0: calling pci_fixup_transparent_bridge+0x0/0x4a pci 0000:00:02.0: supports D1 pci 0000:00:02.1: found [8086:3582] class 000380 header type 00 pci 0000:00:02.1: reg 10 32bit mmio: [0x20000000-0x27ffffff] pci 0000:00:02.1: reg 14 32bit mmio: [0x2c000000-0x2c07ffff] pci 0000:00:02.1: calling quirk_resource_alignment+0x0/0x182 pci 0000:00:02.1: calling pci_fixup_transparent_bridge+0x0/0x4a pci 0000:00:02.1: supports D1 pci 0000:00:1d.0: found [8086:24c2] class 000c03 header type 00 pci 0000:00:1d.0: reg 20 io port: [0xcfe0-0xcfff] pci 0000:00:1d.0: calling asus_hides_smbus_hostbridge+0x0/0x20f pci 0000:00:1d.0: calling quirk_resource_alignment+0x0/0x182 pci 0000:00:1d.0: calling pci_fixup_transparent_bridge+0x0/0x4a pci 0000:00:1d.1: found [8086:24c4] class 000c03 header type 00 pci 0000:00:1d.1: reg 20 io port: [0xcf80-0xcf9f] pci 0000:00:1d.1: calling quirk_resource_alignment+0x0/0x182 pci 0000:00:1d.1: calling pci_fixup_transparent_bridge+0x0/0x4a pci 0000:00:1d.7: found [8086:24cd] class 000c03 header type 00 pci 0000:00:1d.7: reg 10 32bit mmio: [0x000000-0x0003ff] pci 0000:00:1d.7: calling quirk_resource_alignment+0x0/0x182 pci 0000:00:1d.7: calling pci_fixup_transparent_bridge+0x0/0x4a pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: found [8086:2448] class 000604 header type 01 pci 0000:00:1e.0: calling quirk_resource_alignment+0x0/0x182 pci 0000:00:1e.0: calling pci_fixup_transparent_bridge+0x0/0x4a pci 0000:00:1f.0: found [8086:24cc] class 000601 header type 00 pci 0000:00:1f.0: calling old_ich_force_enable_hpet_user+0x0/0x33 pci 0000:00:1f.0: calling asus_hides_smbus_lpc+0x0/0xc1 pci 0000:00:1f.0: calling quirk_ich4_lpc_acpi+0x0/0x81 pci 0000:00:1f.0: quirk: region d800-d87f claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region eec0-eeff claimed by ICH4 GPIO pci 0000:00:1f.0: calling quirk_resource_alignment+0x0/0x182 pci 0000:00:1f.0: calling pci_fixup_transparent_bridge+0x0/0x4a pci 0000:00:1f.1: found [8086:24ca] class 000101 header type 00 pci 0000:00:1f.1: reg 10 io port: [0xbff8-0xbfff] pci 0000:00:1f.1: reg 14 io port: [0xbff4-0xbff7] pci 0000:00:1f.1: reg 18 io port: [0xbfe8-0xbfef] pci 0000:00:1f.1: reg 1c io port: [0xbfe4-0xbfe7] pci 0000:00:1f.1: reg 20 io port: [0xbfa0-0xbfaf] pci 0000:00:1f.1: reg 24 32bit mmio: [0x2c080400-0x2c0807ff] pci 0000:00:1f.1: calling quirk_resource_alignment+0x0/0x182 pci 0000:00:1f.1: calling pci_fixup_transparent_bridge+0x0/0x4a pci 0000:00:1f.5: found [8086:24c5] class 000401 header type 00 pci 0000:00:1f.5: reg 10 io port: [0x00-0xff] pci 0000:00:1f.5: reg 14 io port: [0x00-0x3f] pci 0000:00:1f.5: reg 18 32bit mmio: [0x000000-0x0001ff] pci 0000:00:1f.5: reg 1c 32bit mmio: [0x000000-0x0000ff] pci 0000:00:1f.5: calling quirk_resource_alignment+0x0/0x182 pci 0000:00:1f.5: calling pci_fixup_transparent_bridge+0x0/0x4a pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold pci 0000:00:1f.5: PME# disabled pci 0000:00:1f.6: found [8086:24c6] class 000703 header type 00 pci 0000:00:1f.6: reg 10 io port: [0x00-0xff] pci 0000:00:1f.6: reg 14 io port: [0x00-0x7f] pci 0000:00:1f.6: calling quirk_resource_alignment+0x0/0x182 pci 0000:00:1f.6: calling pci_fixup_transparent_bridge+0x0/0x4a pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold pci 0000:00:1f.6: PME# disabled PCI: Fixups for bus 0000:00 pci 0000:00:1e.0: scanning behind bridge, config 030100, pass 0 PCI: Scanning bus 0000:01 pci 0000:01:08.0: found [8086:103d] class 000200 header type 00 pci 0000:01:08.0: reg 10 32bit mmio: [0xcffff000-0xcfffffff] pci 0000:01:08.0: reg 14 io port: [0xcf40-0xcf7f] pci 0000:01:08.0: calling quirk_resource_alignment+0x0/0x182 pci 0000:01:08.0: calling pci_fixup_transparent_bridge+0x0/0x4a pci 0000:01:08.0: supports D1 D2 pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:01:08.0: PME# disabled pci 0000:01:0b.0: found [1179:0617] class 000607 header type 02 pci 0000:01:0b.0: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:01:0b.0: calling quirk_resource_alignment+0x0/0x182 PCI: Fixups for bus 0000:01 pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff] pci 0000:00:1e.0: bridge 32bit mmio: [0xcff00000-0xcfffffff] pci 0000:01:0b.0: scanning behind bridge, config 030301, pass 0 pci 0000:01:0b.0: scanning behind bridge, config 030301, pass 1 PCI: Bus scan for 0000:01 returning with max=02 pci 0000:00:1e.0: scanning behind bridge, config 030100, pass 1 PCI: Bus scan for 0000:00 returning with max=03 pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *10) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11) PCI: Using ACPI for IRQ routing pci 0000:00:1d.0: BAR 4: address space collision on of device [0xcfe0-0xcfff] pci 0000:00:1d.0: BAR 4: can't allocate resource pci 0000:00:1d.1: BAR 4: address space collision on of device [0xcf80-0xcf9f] pci 0000:00:1d.1: BAR 4: can't allocate resource pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:1d.0 BAR 4 (0x0-0x1f), disabling pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:1d.1 BAR 4 (0x0-0x1f), disabling pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP system 00:00: iomem range 0x0-0x9ffff could not be reserved (The fact that a range could not be reserved is generally harmless.) system 00:00: iomem range 0xe0000-0xeffff could not be reserved system 00:00: iomem range 0xf0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x1ef3ffff could not be reserved system 00:00: iomem range 0x1ef40000-0x1ef4ffff could not be reserved system 00:00: iomem range 0x1ef50000-0x1effffff has been reserved system 00:00: iomem range 0xfec10000-0xfec1ffff has been reserved system 00:00: iomem range 0xfeda0000-0xfedbffff has been reserved system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved system 00:00: iomem range 0xffe80000-0xffffffff has been reserved system 00:08: ioport range 0x1e0-0x1ef has been reserved system 00:08: ioport range 0x480-0x48f has been reserved system 00:08: ioport range 0x680-0x6ff has been reserved system 00:08: ioport range 0x800-0x80f has been reserved system 00:08: ioport range 0xd800-0xd87f has been reserved system 00:08: ioport range 0xd880-0xd89f has been reserved system 00:08: ioport range 0xd8a0-0xd8bf has been reserved system 00:08: ioport range 0xe000-0xe07f has been reserved system 00:08: ioport range 0xe080-0xe0ff has been reserved system 00:08: ioport range 0xe400-0xe47f has been reserved system 00:08: ioport range 0xe480-0xe4ff has been reserved system 00:08: ioport range 0xe800-0xe87f has been reserved system 00:08: ioport range 0xe880-0xe8ff has been reserved system 00:08: ioport range 0xec00-0xec7f has been reserved system 00:08: ioport range 0xec80-0xecff has been reserved system 00:08: ioport range 0xeeac-0xeeac has been reserved system 00:08: ioport range 0xeeb0-0xeebf has been reserved system 00:08: ioport range 0xeec0-0xeeff has been reserved system 00:08: ioport range 0x4d0-0x4d1 has been reserved pci 0000:00:1d.7: BAR 0: got res [0x2c080000-0x2c0803ff] bus [0x2c080000-0x2c0803ff] flags 0x20200 pci 0000:00:1d.7: BAR 0: moved to bus [0x2c080000-0x2c0803ff] flags 0x20200 pci 0000:00:1f.5: BAR 2: got res [0x2c080800-0x2c0809ff] bus [0x2c080800-0x2c0809ff] flags 0x20200 pci 0000:00:1f.5: BAR 2: moved to bus [0x2c080800-0x2c0809ff] flags 0x20200 pci 0000:00:1f.5: BAR 0: got res [0x1000-0x10ff] bus [0x1000-0x10ff] flags 0x20101 pci 0000:00:1f.5: BAR 0: moved to bus [0x1000-0x10ff] flags 0x20101 pci 0000:00:1f.5: BAR 3: got res [0x2c080a00-0x2c080aff] bus [0x2c080a00-0x2c080aff] flags 0x20200 pci 0000:00:1f.5: BAR 3: moved to bus [0x2c080a00-0x2c080aff] flags 0x20200 pci 0000:00:1f.6: BAR 0: got res [0x1400-0x14ff] bus [0x1400-0x14ff] flags 0x20101 pci 0000:00:1f.6: BAR 0: moved to bus [0x1400-0x14ff] flags 0x20101 pci 0000:00:1f.6: BAR 1: got res [0x1800-0x187f] bus [0x1800-0x187f] flags 0x20101 pci 0000:00:1f.6: BAR 1: moved to bus [0x1800-0x187f] flags 0x20101 pci 0000:00:1f.5: BAR 1: got res [0x1880-0x18bf] bus [0x1880-0x18bf] flags 0x20101 pci 0000:00:1f.5: BAR 1: moved to bus [0x1880-0x18bf] flags 0x20101 pci 0000:00:1d.0: BAR 4: got res [0x18c0-0x18df] bus [0x18c0-0x18df] flags 0x20101 pci 0000:00:1d.0: BAR 4: moved to bus [0x18c0-0x18df] flags 0x20101 pci 0000:00:1d.1: BAR 4: got res [0x18e0-0x18ff] bus [0x18e0-0x18ff] flags 0x20101 pci 0000:00:1d.1: BAR 4: moved to bus [0x18e0-0x18ff] flags 0x20101 pci 0000:01:0b.0: BAR 0: got res [0xcff00000-0xcff00fff] bus [0xcff00000-0xcff00fff] flags 0x20200 pci 0000:01:0b.0: BAR 0: moved to bus [0xcff00000-0xcff00fff] flags 0x20200 pci 0000:01:0b.0: CardBus bridge, secondary bus 0000:02 pci 0000:01:0b.0: IO window: 0x00c000-0x00c0ff pci 0000:01:0b.0: IO window: 0x00c400-0x00c4ff pci 0000:01:0b.0: PREFETCH window: 0x28000000-0x2bffffff pci 0000:01:0b.0: MEM window: 0x30000000-0x33ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1e.0: IO window: 0xc000-0xcfff pci 0000:00:1e.0: MEM window: 0xcff00000-0xcfffffff pci 0000:00:1e.0: PREFETCH window: 0x28000000-0x2bffffff pci 0000:00:1e.0: setting latency timer to 64 pci 0000:01:0b.0: enabling device (0000 -> 0003) pci 0000:01:0b.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:01:0b.0: enabling bus mastering pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] pci_bus 0000:01: resource 1 mem: [0xcff00000-0xcfffffff] pci_bus 0000:01: resource 2 pref mem [0x28000000-0x2bffffff] pci_bus 0000:01: resource 3 io: [0x00-0xffff] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff] pci_bus 0000:02: resource 0 io: [0xc000-0xc0ff] pci_bus 0000:02: resource 1 io: [0xc400-0xc4ff] pci_bus 0000:02: resource 2 pref mem [0x28000000-0x2bffffff] pci_bus 0000:02: resource 3 mem: [0x30000000-0x33ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 3894k freed Simple Boot Flag at 0x7c set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1250267810.288:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 972 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x174 pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x41 pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x571 pci 0000:00:00.0: calling pci_fixup_video+0x0/0xae pci 0000:00:00.1: calling quirk_e100_interrupt+0x0/0x174 pci 0000:00:00.1: calling quirk_cardbus_legacy+0x0/0x41 pci 0000:00:00.1: calling quirk_usb_early_handoff+0x0/0x571 pci 0000:00:00.1: calling pci_fixup_video+0x0/0xae pci 0000:00:00.3: calling quirk_e100_interrupt+0x0/0x174 pci 0000:00:00.3: calling quirk_cardbus_legacy+0x0/0x41 pci 0000:00:00.3: calling quirk_usb_early_handoff+0x0/0x571 pci 0000:00:00.3: calling pci_fixup_video+0x0/0xae pci 0000:00:02.0: calling quirk_e100_interrupt+0x0/0x174 pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x41 pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x571 pci 0000:00:02.0: calling pci_fixup_video+0x0/0xae pci 0000:00:02.0: Boot video device pci 0000:00:02.1: calling quirk_e100_interrupt+0x0/0x174 pci 0000:00:02.1: calling quirk_cardbus_legacy+0x0/0x41 pci 0000:00:02.1: calling quirk_usb_early_handoff+0x0/0x571 pci 0000:00:02.1: calling pci_fixup_video+0x0/0xae pci 0000:00:1d.0: calling quirk_e100_interrupt+0x0/0x174 pci 0000:00:1d.0: calling quirk_cardbus_legacy+0x0/0x41 pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x571 pci 0000:00:1d.0: calling pci_fixup_video+0x0/0xae pci 0000:00:1d.1: calling quirk_e100_interrupt+0x0/0x174 pci 0000:00:1d.1: calling quirk_cardbus_legacy+0x0/0x41 pci 0000:00:1d.1: calling quirk_usb_early_handoff+0x0/0x571 pci 0000:00:1d.1: calling pci_fixup_video+0x0/0xae pci 0000:00:1d.7: calling quirk_e100_interrupt+0x0/0x174 pci 0000:00:1d.7: calling quirk_cardbus_legacy+0x0/0x41 pci 0000:00:1d.7: calling quirk_usb_early_handoff+0x0/0x571 pci 0000:00:1d.7: calling pci_fixup_video+0x0/0xae pci 0000:00:1e.0: calling quirk_e100_interrupt+0x0/0x174 pci 0000:00:1e.0: calling quirk_cardbus_legacy+0x0/0x41 pci 0000:00:1e.0: calling quirk_usb_early_handoff+0x0/0x571 pci 0000:00:1e.0: calling pci_fixup_video+0x0/0xae pci 0000:00:1f.0: calling quirk_e100_interrupt+0x0/0x174 pci 0000:00:1f.0: calling quirk_cardbus_legacy+0x0/0x41 pci 0000:00:1f.0: calling quirk_usb_early_handoff+0x0/0x571 pci 0000:00:1f.0: calling pci_fixup_video+0x0/0xae pci 0000:00:1f.1: calling quirk_e100_interrupt+0x0/0x174 pci 0000:00:1f.1: calling quirk_cardbus_legacy+0x0/0x41 pci 0000:00:1f.1: calling quirk_usb_early_handoff+0x0/0x571 pci 0000:00:1f.1: calling pci_fixup_video+0x0/0xae pci 0000:00:1f.5: calling quirk_e100_interrupt+0x0/0x174 pci 0000:00:1f.5: calling quirk_cardbus_legacy+0x0/0x41 pci 0000:00:1f.5: calling quirk_usb_early_handoff+0x0/0x571 pci 0000:00:1f.5: calling pci_fixup_video+0x0/0xae pci 0000:00:1f.6: calling quirk_e100_interrupt+0x0/0x174 pci 0000:00:1f.6: calling quirk_cardbus_legacy+0x0/0x41 pci 0000:00:1f.6: calling quirk_usb_early_handoff+0x0/0x571 pci 0000:00:1f.6: calling pci_fixup_video+0x0/0xae pci 0000:01:08.0: calling quirk_e100_interrupt+0x0/0x174 pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling pci 0000:01:08.0: calling quirk_cardbus_legacy+0x0/0x41 pci 0000:01:08.0: calling quirk_usb_early_handoff+0x0/0x571 pci 0000:01:08.0: calling pci_fixup_video+0x0/0xae pci 0000:01:0b.0: calling quirk_cardbus_legacy+0x0/0x41 pci 0000:01:0b.0: calling quirk_usb_early_handoff+0x0/0x571 pci 0000:01:0b.0: calling pci_fixup_video+0x0/0xae vesafb: framebuffer at 0xd8000000, mapped to 0xdf780000, using 3072k, total 16192k vesafb: mode is 1024x768x16, linelength=2048, pages=9 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... Switched to high resolution mode on CPU 0 isapnp: No Plug & Play device found Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Platform driver 'serial8250' needs updating - please use dev_pm_ops serial 0000:00:1f.6: power state changed by ACPI to D0 serial 0000:00:1f.6: enabling device (0000 -> 0001) serial 0000:00:1f.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17 serial 0000:00:1f.6: PCI INT B disabled brd: module loaded e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation e100 0000:01:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e100 0000:01:08.0: PME# disabled e100: eth0: e100_probe: addr 0xcffff000, irq 20, MAC addr 00:08:0d:17:bf:f5 console [netcon0] enabled netconsole: network logging started PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 Platform driver 'i8042' needs updating - please use dev_pm_ops serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP bic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode Freeing unused kernel memory: 312k freed input: AT Translated Set 2 keyboard as /class/input/input0 fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [FAN] (off) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (59 C) usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Uniform Multi-Platform E-IDE driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: enabling device (0000 -> 0002) ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: enabling bus mastering ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0x2c080000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected uhci_hcd: USB Universal Host Controller Interface driver piix 0000:00:1f.1: IDE controller (0x8086:0x24ca rev 0x03) PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xbfa0-0xbfa7 ide1: BM-DMA at 0xbfa8-0xbfaf Probing IDE interface ide0... hda: HTS541080G9AT00, ATA DISK drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected Probing IDE interface ide1... hdc: TOSHIBA DVD-ROM SD-R6112, ATAPI CD/DVD-ROM drive hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdc: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018e0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected SCSI subsystem initialized libata version 3.00 loaded. ide-gd driver 1.18 hda: max request size: 512KiB ide-cd driver 5.00 hda: 156301488 sectors (80026 MB) w/7539KiB Cache, CHS=16383/255/63 hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 > ide-cd: hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. udevd version 125 started Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 855GM Chipset agpgart-intel 0000:00:00.0: detected 16252K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xd8000000 input: Power Button as /class/input/input1 ACPI: Power Button [PWRF] input: Lid Switch as /class/input/input2 ACPI: Lid Switch [LID] input: Power Button as /class/input/input3 ACPI: Power Button [PWRB] ACPI Warning: \_SB_.BAT1._BIF: Return Package type mismatch at index 12 - found Integer, expected String/Buffer 20090521 nspredef-946 ACPI: Battery Slot [BAT1] (battery present) Marking TSC unstable due to TSC halts in idle ACPI: CPU0 (power states: C1[C1] C2[C2]) processor LNXCPU:00: registered as cooling_device1 ACPI: AC Adapter [ADP1] (on-line) parport_pc 00:09: activated parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0xd860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) rtc_cmos 00:07: RTC can wake from S4 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, 114 bytes nvram [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function acpi device:0f: registered as cooling_device2 input: Video Bus as /class/input/input4 ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no) input: PC Speaker as /class/input/input5 input: Toshiba input device as /class/input/input6 toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19 toshiba_acpi: HCI method: \_SB_.VALZ.GHCI pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 yenta_cardbus 0000:01:0b.0: CardBus bridge found [1179:0001] yenta_cardbus 0000:01:0b.0: ISA IRQ mask 0x0c38, PCI irq 18 yenta_cardbus 0000:01:0b.0: Socket status: 30000020 yenta_cardbus 0000:01:0b.0: pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc000-0xcfff: clean. yenta_cardbus 0000:01:0b.0: pcmcia: parent PCI bridge Memory window: 0xcff00000 - 0xcfffffff yenta_cardbus 0000:01:0b.0: pcmcia: parent PCI bridge Memory window: 0x28000000 - 0x2bffffff input: PS/2 Mouse as /class/input/input7 input: AlpsPS/2 ALPS GlidePoint as /class/input/input8 pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0 pci 0000:02:00.0: found [168c:0013] class 000200 header type 00 pci 0000:02:00.0: reg 10 32bit mmio: [0x000000-0x00ffff] pci 0000:02:00.0: calling quirk_resource_alignment+0x0/0x182 pci 0000:02:00.0: BAR 0: got res [0x30000000-0x3000ffff] bus [0x30000000-0x3000ffff] flags 0x20200 pci 0000:02:00.0: BAR 0: moved to bus [0x30000000-0x3000ffff] flags 0x20200 cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: EU (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) (5490000 KHz - 5710000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) cfg80211: Calling CRDA for country: EU pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. ath5k 0000:02:00.0: enabling device (0000 -> 0002) ath5k 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ath5k 0000:02:00.0: enabling bus mastering ath5k 0000:02:00.0: registered as 'phy0' ath: EEPROM regdomain: 0x30 ath: EEPROM indicates we should expect a direct regpair map ath: Country alpha2 being used: AM ath: Regpair used: 0x30 phy0: Selected rate control algorithm 'minstrel' ath5k phy0: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43) ath5k phy0: RF2112B 2GHz radio found (0x46) cfg80211: Calling CRDA for country: AM udev: renamed network interface wlan0 to ath0 EXT3 FS on dm-1, internal journal padlock: VIA PadLock not detected. padlock: VIA PadLock Hash Engine not detected. loop: module loaded kjournald starting. Commit interval 5 seconds EXT3 FS on dm-7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1048568k swap on /dev/mapper/strider-swap_crypt. Priority:-1 extents:1 across:1048568k RPC: Registered udp transport module. RPC: Registered tcp transport module. ath0: authenticate with AP 00:14:c1:38:e5:15 ath0: authenticated ath0: associate with AP 00:14:c1:38:e5:15 ath0: RX AssocResp from 00:14:c1:38:e5:15 (capab=0x411 status=0 aid=2) ath0: associated lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver Clocksource tsc unstable (delta = -138927951 ns)