[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-rc5-git3-10-default (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2009-08-05 22:36:33 +0200 [ 0.000000] Command line: root=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part2 repair=1 resume=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part1 splash=silent elevator=cfq vga=0x317 acpi=off [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000b5aa1000 (usable) [ 0.000000] BIOS-e820: 00000000b5aa1000 - 00000000b5aa7000 (reserved) [ 0.000000] BIOS-e820: 00000000b5aa7000 - 00000000b5bba000 (usable) [ 0.000000] BIOS-e820: 00000000b5bba000 - 00000000b5c0f000 (reserved) [ 0.000000] BIOS-e820: 00000000b5c0f000 - 00000000b5d08000 (usable) [ 0.000000] BIOS-e820: 00000000b5d08000 - 00000000b5f0f000 (reserved) [ 0.000000] BIOS-e820: 00000000b5f0f000 - 00000000b5f18000 (usable) [ 0.000000] BIOS-e820: 00000000b5f18000 - 00000000b5f1f000 (reserved) [ 0.000000] BIOS-e820: 00000000b5f1f000 - 00000000b5f65000 (usable) [ 0.000000] BIOS-e820: 00000000b5f65000 - 00000000b5f9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000b5f9f000 - 00000000b5fe1000 (usable) [ 0.000000] BIOS-e820: 00000000b5fe1000 - 00000000b5fff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000b5fff000 - 00000000b6000000 (usable) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 100000000 mask FC0000000 write-back [ 0.000000] 3 base 0B8000000 mask FF8000000 uncachable [ 0.000000] 4 base 0B7E00000 mask FFFE00000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000b7e00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xb6000 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f400 (usable) [ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000b5aa1000 (usable) [ 0.000000] modified: 00000000b5aa1000 - 00000000b5aa7000 (reserved) [ 0.000000] modified: 00000000b5aa7000 - 00000000b5bba000 (usable) [ 0.000000] modified: 00000000b5bba000 - 00000000b5c0f000 (reserved) [ 0.000000] modified: 00000000b5c0f000 - 00000000b5d08000 (usable) [ 0.000000] modified: 00000000b5d08000 - 00000000b5f0f000 (reserved) [ 0.000000] modified: 00000000b5f0f000 - 00000000b5f18000 (usable) [ 0.000000] modified: 00000000b5f18000 - 00000000b5f1f000 (reserved) [ 0.000000] modified: 00000000b5f1f000 - 00000000b5f65000 (usable) [ 0.000000] modified: 00000000b5f65000 - 00000000b5f9f000 (ACPI NVS) [ 0.000000] modified: 00000000b5f9f000 - 00000000b5fe1000 (usable) [ 0.000000] modified: 00000000b5fe1000 - 00000000b5fff000 (ACPI data) [ 0.000000] modified: 00000000b5fff000 - 00000000b6000000 (usable) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000b6000000 [ 0.000000] 0000000000 - 00b6000000 page 2M [ 0.000000] kernel direct mapping tables up to b6000000 @ 8000-c000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000 [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ a000-10000 [ 0.000000] RAMDISK: 37a98000 - 37fef362 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [000000000000b000 - 0000000000022fff] [ 0.000000] bootmap [0000000000023000 - 000000000004afff] pages 28 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001c76630] TEXT DATA BSS ==> [0001000000 - 0001c76630] [ 0.000000] #3 [0037a98000 - 0037fef362] RAMDISK ==> [0037a98000 - 0037fef362] [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] [ 0.000000] #5 [0001c77000 - 0001c771e4] BRK ==> [0001c77000 - 0001c771e4] [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000] [ 0.000000] found SMP MP-table at [ffff8800000f6f20] f6f20 [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880001e00000-ffff8800055fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[10] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000b5aa1 [ 0.000000] 0: 0x000b5aa7 -> 0x000b5bba [ 0.000000] 0: 0x000b5c0f -> 0x000b5d08 [ 0.000000] 0: 0x000b5f0f -> 0x000b5f18 [ 0.000000] 0: 0x000b5f1f -> 0x000b5f65 [ 0.000000] 0: 0x000b5f9f -> 0x000b5fe1 [ 0.000000] 0: 0x000b5fff -> 0x000b6000 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1006809 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3836 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 726391 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] MPTABLE: OEM ID: INTEL [ 0.000000] MPTABLE: Product ID: MontavinaCRB [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] I/O APIC #2 Version 32 at 0xFEC00000. [ 0.000000] Processors: 2 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000b5aa1000 - 00000000b5aa7000 [ 0.000000] PM: Registered nosave memory: 00000000b5bba000 - 00000000b5c0f000 [ 0.000000] PM: Registered nosave memory: 00000000b5d08000 - 00000000b5f0f000 [ 0.000000] PM: Registered nosave memory: 00000000b5f18000 - 00000000b5f1f000 [ 0.000000] PM: Registered nosave memory: 00000000b5f65000 - 00000000b5f9f000 [ 0.000000] PM: Registered nosave memory: 00000000b5fe1000 - 00000000b5fff000 [ 0.000000] PM: Registered nosave memory: 00000000b6000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at b6000000 (gap: b6000000:4a000000) [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages at ffff88000564b000, static data 82912 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 988787 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part2 repair=1 resume=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part1 splash=silent elevator=cfq vga=0x317 acpi=off [ 0.000000] bootsplash: silent mode. [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff88000568c000 - ffff88000968c000 [ 0.000000] software IO TLB at phys 0x568c000 - 0x968c000 [ 0.000000] Memory: 3884988k/5242880k available (5578k kernel code, 1215644k absent, 142248k reserved, 4455k data, 1048k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2526.720 MHz processor. [ 0.000084] Console: colour dummy device 80x25 [ 0.000086] console [tty0] enabled [ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.44 BogoMIPS (lpj=10106880) [ 0.011367] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved [ 0.011486] Security Framework initialized [ 0.011508] AppArmor: AppArmor initialized [ 0.011810] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.013827] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.015311] Mount-cache hash table entries: 256 [ 0.015476] Initializing cgroup subsys ns [ 0.015483] Initializing cgroup subsys cpuacct [ 0.015488] Initializing cgroup subsys memory [ 0.015505] Initializing cgroup subsys devices [ 0.015509] Initializing cgroup subsys freezer [ 0.015512] Initializing cgroup subsys net_cls [ 0.015541] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.015545] CPU: L2 cache: 3072K [ 0.015550] CPU 0/0x0 -> Node 0 [ 0.015553] CPU: Physical Processor ID: 0 [ 0.015555] CPU: Processor Core ID: 0 [ 0.015560] mce: CPU supports 6 MCE banks [ 0.015569] CPU0: Thermal monitoring enabled (TM2) [ 0.015575] using mwait in idle threads. [ 0.015577] Performance Counters: Core2 events, Intel PMU driver. [ 0.015585] ... version: 2 [ 0.015588] ... bit width: 40 [ 0.015590] ... generic counters: 2 [ 0.015593] ... value mask: 000000ffffffffff [ 0.015596] ... max period: 000000007fffffff [ 0.015599] ... fixed-purpose counters: 3 [ 0.015601] ... counter mask: 0000000700000003 [ 0.017812] Setting APIC routing to flat [ 0.017888] ExtINT not setup in hardware but reported by MP table [ 0.018013] alloc irq_desc for 16 on node 0 [ 0.018015] alloc kstat_irqs on node 0 [ 0.018021] alloc irq_desc for 17 on node 0 [ 0.018022] alloc kstat_irqs on node 0 [ 0.018026] alloc irq_desc for 18 on node 0 [ 0.018027] alloc kstat_irqs on node 0 [ 0.018030] alloc irq_desc for 19 on node 0 [ 0.018031] alloc kstat_irqs on node 0 [ 0.018034] alloc irq_desc for 21 on node 0 [ 0.018036] alloc kstat_irqs on node 0 [ 0.018038] alloc irq_desc for 22 on node 0 [ 0.018039] alloc kstat_irqs on node 0 [ 0.018043] alloc irq_desc for 23 on node 0 [ 0.018044] alloc kstat_irqs on node 0 [ 0.018185] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.057882] CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a [ 0.164227] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 5054.25 BogoMIPS (lpj=10108515) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU 1/0x1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.253537] CPU1: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a [ 0.253564] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.256028] Brought up 2 CPUs [ 0.256028] Total of 2 processors activated (10107.69 BogoMIPS). [ 0.256093] CPU0 attaching sched-domain: [ 0.256096] domain 0: span 0-1 level MC [ 0.256098] groups: 0 1 [ 0.256103] CPU1 attaching sched-domain: [ 0.256104] domain 0: span 0-1 level MC [ 0.256106] groups: 1 0 [ 0.256160] devtmpfs: initialized [ 0.261248] Booting paravirtualized kernel on bare hardware [ 0.261249] regulator: core version 0.5 [ 0.261249] Time: 20:25:32 Date: 08/14/09 [ 0.261249] NET: Registered protocol family 16 [ 0.261249] PCI: Using configuration type 1 for base access [ 0.261249] bio: create slab at 0 [ 0.261249] ACPI: Interpreter disabled. [ 0.261249] SCSI subsystem initialized [ 0.261249] libata version 3.00 loaded. [ 0.261249] usbcore: registered new interface driver usbfs [ 0.261249] usbcore: registered new interface driver hub [ 0.261249] usbcore: registered new device driver usb [ 0.261249] PCI: Probing PCI hardware [ 0.261249] PCI: Probing PCI hardware (bus 00) [ 0.261249] pci 0000:00:02.0: reg 10 64bit mmio: [0xf4000000-0xf43fffff] [ 0.261249] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] [ 0.261249] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] [ 0.261249] pci 0000:00:02.1: reg 10 64bit mmio: [0xf4400000-0xf44fffff] [ 0.261249] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f] [ 0.261249] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f] [ 0.261249] pci 0000:00:1a.2: reg 20 io port: [0x1860-0x187f] [ 0.261249] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf4a04800-0xf4a04bff] [ 0.261249] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.261249] pci 0000:00:1a.7: PME# disabled [ 0.261249] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf4800000-0xf4803fff] [ 0.261249] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.261249] pci 0000:00:1b.0: PME# disabled [ 0.261249] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.261249] pci 0000:00:1c.0: PME# disabled [ 0.261249] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.261249] pci 0000:00:1c.4: PME# disabled [ 0.261249] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.261249] pci 0000:00:1c.5: PME# disabled [ 0.261249] pci 0000:00:1d.0: reg 20 io port: [0x1880-0x189f] [ 0.261249] pci 0000:00:1d.1: reg 20 io port: [0x18a0-0x18bf] [ 0.261252] pci 0000:00:1d.2: reg 20 io port: [0x18c0-0x18df] [ 0.261343] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf4a04c00-0xf4a04fff] [ 0.261408] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.261415] pci 0000:00:1d.7: PME# disabled [ 0.261656] pci 0000:00:1f.2: reg 10 io port: [0x1818-0x181f] [ 0.261663] pci 0000:00:1f.2: reg 14 io port: [0x180c-0x180f] [ 0.261669] pci 0000:00:1f.2: reg 18 io port: [0x1810-0x1817] [ 0.261677] pci 0000:00:1f.2: reg 1c io port: [0x1808-0x180b] [ 0.261683] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff] [ 0.261690] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf4a04000-0xf4a047ff] [ 0.261735] pci 0000:00:1f.2: PME# supported from D3hot [ 0.261741] pci 0000:00:1f.2: PME# disabled [ 0.261780] pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff] [ 0.261797] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f] [ 0.261878] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] [ 0.261882] pci 0000:00:1c.0: bridge 32bit mmio: [0xf2000000-0xf3ffffff] [ 0.261890] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff] [ 0.261960] pci 0000:07:00.0: reg 10 64bit mmio: [0xf4500000-0xf4503fff] [ 0.261970] pci 0000:07:00.0: reg 18 io port: [0x3000-0x30ff] [ 0.262049] pci 0000:07:00.0: supports D1 D2 [ 0.262051] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.262058] pci 0000:07:00.0: PME# disabled [ 0.272117] pci 0000:00:1c.4: bridge io port: [0x3000-0x3fff] [ 0.272122] pci 0000:00:1c.4: bridge 32bit mmio: [0xf4500000-0xf45fffff] [ 0.272212] pci 0000:08:00.0: reg 10 64bit mmio: [0xf4600000-0xf4601fff] [ 0.272321] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.272330] pci 0000:08:00.0: PME# disabled [ 0.280128] pci 0000:00:1c.5: bridge 32bit mmio: [0xf4600000-0xf46fffff] [ 0.280176] pci 0000:0a:01.0: reg 10 32bit mmio: [0xff501000-0xff501fff] [ 0.280184] pci 0000:0a:01.0: reg 14 32bit mmio: [0xf4700000-0xf47007ff] [ 0.280235] pci 0000:0a:01.0: supports D1 D2 [ 0.280236] pci 0000:0a:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.280243] pci 0000:0a:01.0: PME# disabled [ 0.280290] pci 0000:0a:01.2: reg 10 32bit mmio: [0xf4700800-0xf47008ff] [ 0.280355] pci 0000:0a:01.2: supports D1 D2 [ 0.280356] pci 0000:0a:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.280362] pci 0000:0a:01.2: PME# disabled [ 0.280410] pci 0000:0a:01.3: reg 10 32bit mmio: [0xf4702000-0xf4702fff] [ 0.280474] pci 0000:0a:01.3: supports D1 D2 [ 0.280476] pci 0000:0a:01.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.280482] pci 0000:0a:01.3: PME# disabled [ 0.280548] pci 0000:00:1e.0: transparent bridge [ 0.280557] pci 0000:00:1e.0: bridge 32bit mmio: [0xf4700000-0xf47fffff] [ 0.289085] AppArmor: AppArmor Filesystem Enabled [ 0.289090] pnp: PnP ACPI: disabled [ 0.290854] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.290854] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.290854] pci 0000:00:1c.0: MEM window: 0xf2000000-0xf3ffffff [ 0.290854] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff [ 0.290854] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07 [ 0.290854] pci 0000:00:1c.4: IO window: 0x3000-0x3fff [ 0.290854] pci 0000:00:1c.4: MEM window: 0xf4500000-0xf45fffff [ 0.290854] pci 0000:00:1c.4: PREFETCH window: disabled [ 0.290854] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08 [ 0.290854] pci 0000:00:1c.5: IO window: disabled [ 0.290854] pci 0000:00:1c.5: MEM window: 0xf4600000-0xf46fffff [ 0.290854] pci 0000:00:1c.5: PREFETCH window: disabled [ 0.290854] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a [ 0.290854] pci 0000:00:1e.0: IO window: disabled [ 0.290854] pci 0000:00:1e.0: MEM window: 0xf4700000-0xf47fffff [ 0.290854] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.290854] pci 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 17 [ 0.290854] pci 0000:00:1c.0: setting latency timer to 64 [ 0.290854] pci 0000:00:1c.4: PCI->APIC IRQ transform: INT A -> IRQ 17 [ 0.290854] pci 0000:00:1c.4: setting latency timer to 64 [ 0.290854] pci 0000:00:1c.5: PCI->APIC IRQ transform: INT B -> IRQ 16 [ 0.290854] pci 0000:00:1c.5: setting latency timer to 64 [ 0.290854] pci 0000:00:1e.0: setting latency timer to 64 [ 0.290854] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.290854] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.290854] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] [ 0.290854] pci_bus 0000:02: resource 1 mem: [0xf2000000-0xf3ffffff] [ 0.290854] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf1ffffff] [ 0.290854] pci_bus 0000:07: resource 0 io: [0x3000-0x3fff] [ 0.290854] pci_bus 0000:07: resource 1 mem: [0xf4500000-0xf45fffff] [ 0.290854] pci_bus 0000:08: resource 1 mem: [0xf4600000-0xf46fffff] [ 0.290854] pci_bus 0000:0a: resource 1 mem: [0xf4700000-0xf47fffff] [ 0.290854] pci_bus 0000:0a: resource 3 io: [0x00-0xffff] [ 0.290854] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.290854] NET: Registered protocol family 2 [ 0.290854] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.290854] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.296040] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.296536] TCP: Hash tables configured (established 524288 bind 65536) [ 0.296541] TCP reno registered [ 0.296698] NET: Registered protocol family 1 [ 0.296765] Unpacking initramfs... [ 0.381220] Freeing initrd memory: 5468k freed [ 0.383275] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.383555] Scanning for low memory corruption every 60 seconds [ 0.383751] audit: initializing netlink socket (disabled) [ 0.383769] type=2000 audit(1250281532.380:1): initialized [ 0.390761] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.390886] VFS: Disk quotas dquot_6.5.2 [ 0.390921] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.391056] msgmni has been set to 1899 [ 0.391272] alg: No test for stdrng (krng) [ 0.391301] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.391307] io scheduler noop registered [ 0.391309] io scheduler anticipatory registered [ 0.391313] io scheduler deadline registered [ 0.391331] io scheduler cfq registered (default) [ 0.391399] pci 0000:00:02.0: Boot video device [ 0.413827] alloc irq_desc for 24 on node 0 [ 0.413829] alloc kstat_irqs on node 0 [ 0.413841] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.413852] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.414004] alloc irq_desc for 25 on node 0 [ 0.414006] alloc kstat_irqs on node 0 [ 0.414014] pcieport-driver 0000:00:1c.4: irq 25 for MSI/MSI-X [ 0.414025] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 0.414172] alloc irq_desc for 26 on node 0 [ 0.414173] alloc kstat_irqs on node 0 [ 0.414182] pcieport-driver 0000:00:1c.5: irq 26 for MSI/MSI-X [ 0.414192] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 0.414583] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90001080000, using 6144k, total 131008k [ 0.414589] vesafb: mode is 1024x768x16, linelength=2048, pages=84 [ 0.414593] vesafb: scrolling: redraw [ 0.414596] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.414755] bootsplash 3.1.6-2004/03/31: looking for picture... [ 0.423710] bootsplash: silentjpeg size 100719 bytes [ 0.434575] bootsplash: ...found (1024x768, 38691 bytes, v3). [ 0.466387] Console: switching to colour frame buffer device 124x44 [ 0.509984] fb0: VESA VGA frame buffer device [ 0.511270] Non-volatile memory driver v1.3 [ 0.511368] Linux agpgart interface v0.103 [ 0.511462] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.511808] Platform driver 'serial8250' needs updating - please use dev_pm_ops [ 0.512117] ahci 0000:00:1f.2: version 3.0 [ 0.512138] ahci 0000:00:1f.2: PCI->APIC IRQ transform: INT B -> IRQ 19 [ 0.512351] alloc irq_desc for 27 on node 0 [ 0.512353] alloc kstat_irqs on node 0 [ 0.512363] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X [ 0.512441] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 0.512628] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ems [ 0.512797] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.536087] scsi0 : ahci [ 0.536246] scsi1 : ahci [ 0.536348] scsi2 : ahci [ 0.536451] scsi3 : ahci [ 0.536554] scsi4 : ahci [ 0.536657] scsi5 : ahci [ 0.536746] ata1: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04100 irq 27 [ 0.536917] ata2: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04180 irq 27 [ 0.537085] ata3: DUMMY [ 0.537142] ata4: DUMMY [ 0.537200] ata5: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04300 irq 27 [ 0.539097] ata6: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04380 irq 27 [ 0.541075] Fixed MDIO Bus: probed [ 0.543020] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.545193] ehci_hcd 0000:00:1a.7: PCI->APIC IRQ transform: INT C -> IRQ 19 [ 0.547438] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.547441] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.549745] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.556057] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.558482] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.558497] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf4a04800 [ 0.576050] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.578626] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.581333] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.584135] usb usb1: Product: EHCI Host Controller [ 0.586989] usb usb1: Manufacturer: Linux 2.6.31-rc5-git3-10-default ehci_hcd [ 0.590010] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.593148] usb usb1: configuration #1 chosen from 1 choice [ 0.596343] hub 1-0:1.0: USB hub found [ 0.599555] hub 1-0:1.0: 6 ports detected [ 0.602900] ehci_hcd 0000:00:1d.7: PCI->APIC IRQ transform: INT A -> IRQ 23 [ 0.606350] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.606353] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.609832] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.617341] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.620975] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.620990] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4a04c00 [ 0.640061] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.643839] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.647634] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.651409] usb usb2: Product: EHCI Host Controller [ 0.655178] usb usb2: Manufacturer: Linux 2.6.31-rc5-git3-10-default ehci_hcd [ 0.659044] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.662911] usb usb2: configuration #1 chosen from 1 choice [ 0.666715] hub 2-0:1.0: USB hub found [ 0.670418] hub 2-0:1.0: 6 ports detected [ 0.674116] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.677810] uhci_hcd: USB Universal Host Controller Interface driver [ 0.681516] uhci_hcd 0000:00:1a.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 0.685290] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.685293] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.689094] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.693045] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 [ 0.697038] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.701140] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.705217] usb usb3: Product: UHCI Host Controller [ 0.709342] usb usb3: Manufacturer: Linux 2.6.31-rc5-git3-10-default uhci_hcd [ 0.713512] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.717775] usb usb3: configuration #1 chosen from 1 choice [ 0.721989] hub 3-0:1.0: USB hub found [ 0.726226] hub 3-0:1.0: 2 ports detected [ 0.730455] uhci_hcd 0000:00:1a.1: PCI->APIC IRQ transform: INT B -> IRQ 21 [ 0.734682] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.734685] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.738837] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.743074] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 [ 0.747279] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.751510] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.755787] usb usb4: Product: UHCI Host Controller [ 0.760069] usb usb4: Manufacturer: Linux 2.6.31-rc5-git3-10-default uhci_hcd [ 0.764389] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.768717] usb usb4: configuration #1 chosen from 1 choice [ 0.773002] hub 4-0:1.0: USB hub found [ 0.777211] hub 4-0:1.0: 2 ports detected [ 0.781424] uhci_hcd 0000:00:1a.2: PCI->APIC IRQ transform: INT C -> IRQ 19 [ 0.785680] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.785683] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.789884] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.794198] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860 [ 0.798452] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.802747] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.807056] usb usb5: Product: UHCI Host Controller [ 0.811338] usb usb5: Manufacturer: Linux 2.6.31-rc5-git3-10-default uhci_hcd [ 0.815729] usb usb5: SerialNumber: 0000:00:1a.2 [ 0.820178] usb usb5: configuration #1 chosen from 1 choice [ 0.824566] hub 5-0:1.0: USB hub found [ 0.828897] hub 5-0:1.0: 2 ports detected [ 0.833217] uhci_hcd 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23 [ 0.837552] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.837555] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.841819] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.846160] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880 [ 0.850469] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.854856] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.859234] usb usb6: Product: UHCI Host Controller [ 0.863583] usb usb6: Manufacturer: Linux 2.6.31-rc5-git3-10-default uhci_hcd [ 0.867989] usb usb6: SerialNumber: 0000:00:1d.0 [ 0.872416] usb usb6: configuration #1 chosen from 1 choice [ 0.876831] hub 6-0:1.0: USB hub found [ 0.877703] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.885593] hub 6-0:1.0: 2 ports detected [ 0.890042] uhci_hcd 0000:00:1d.1: PCI->APIC IRQ transform: INT B -> IRQ 19 [ 0.894484] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.894487] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.898847] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.903253] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0 [ 0.905692] ata5: SATA link down (SStatus 0 SControl 300) [ 0.905717] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.905735] ata6: SATA link down (SStatus 0 SControl 300) [ 0.907385] ata2.00: ATAPI: MATSHITADVD-RAM UJ862AS, 1.50, max UDMA/33 [ 0.925177] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.926136] ata1.00: ATA-8: TOSHIBA MK3252GSX, LV010M, max UDMA/100 [ 0.926138] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 0.926824] ata2.00: configured for UDMA/33 [ 0.928145] ata1.00: configured for UDMA/100 [ 0.928248] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3252GS LV01 PQ: 0 ANSI: 5 [ 0.928403] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 0.928443] sd 0:0:0:0: [sda] Write Protect is off [ 0.928445] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.928466] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.928581] sda: [ 0.965153] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.965162] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4 [ 0.965164] ata2: irq_stat 0x40000001 [ 0.965168] ata2: hard resetting link [ 0.975873] sda1 sda2 [ 0.992282] usb usb7: Product: UHCI Host Controller [ 0.996782] usb usb7: Manufacturer: Linux 2.6.31-rc5-git3-10-default uhci_hcd [ 0.996876] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.005742] usb usb7: SerialNumber: 0000:00:1d.1 [ 1.010234] usb usb7: configuration #1 chosen from 1 choice [ 1.014717] hub 7-0:1.0: USB hub found [ 1.019139] hub 7-0:1.0: 2 ports detected [ 1.023647] uhci_hcd 0000:00:1d.2: PCI->APIC IRQ transform: INT C -> IRQ 18 [ 1.028150] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.028154] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.032613] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.037147] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 [ 1.041641] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.046128] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.050622] usb usb8: Product: UHCI Host Controller [ 1.055065] usb usb8: Manufacturer: Linux 2.6.31-rc5-git3-10-default uhci_hcd [ 1.059555] usb usb8: SerialNumber: 0000:00:1d.2 [ 1.064041] usb usb8: configuration #1 chosen from 1 choice [ 1.068523] hub 8-0:1.0: USB hub found [ 1.072948] hub 8-0:1.0: 2 ports detected [ 1.077358] Initializing USB Mass Storage driver... [ 1.081746] usbcore: registered new interface driver usb-storage [ 1.086105] USB Mass Storage support registered. [ 1.090491] usbcore: registered new interface driver libusual [ 1.094894] usbcore: registered new interface driver ums-alauda [ 1.099237] usbcore: registered new interface driver ums-cypress [ 1.103505] usbcore: registered new interface driver ums-datafab [ 1.107721] usbcore: registered new interface driver ums-freecom [ 1.111885] usbcore: registered new interface driver ums-isd200 [ 1.115967] usbcore: registered new interface driver ums-jumpshot [ 1.119957] usbcore: registered new interface driver ums-karma [ 1.123839] usbcore: registered new interface driver ums-onetouch [ 1.127650] usbcore: registered new interface driver ums-sddr09 [ 1.131381] usbcore: registered new interface driver ums-sddr55 [ 1.132140] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.138858] usbcore: registered new interface driver ums-usbat [ 1.142571] PNP: No PS/2 controller found. Probing ports directly. [ 1.146288] Platform driver 'i8042' needs updating - please use dev_pm_ops [ 1.152366] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.157532] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.161187] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.164786] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.168307] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.171799] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.175313] mice: PS/2 mouse device common for all mice [ 1.178888] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 1.182417] rtc0: alarms up to one day, 114 bytes nvram [ 1.185869] cpuidle: using governor ladder [ 1.189284] cpuidle: using governor menu [ 1.192885] usbcore: registered new interface driver hiddev [ 1.196295] usbcore: registered new interface driver usbhid [ 1.199677] usbhid: v2.6:USB HID core driver [ 1.208031] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.269354] usb 1-1: New USB device found, idVendor=05e3, idProduct=0606 [ 1.272913] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.276477] usb 1-1: Product: USB2.0 Hub [ 1.280001] usb 1-1: configuration #1 chosen from 1 choice [ 1.283776] TCP cubic registered [ 1.284225] hub 1-1:1.0: USB hub found [ 1.284486] hub 1-1:1.0: 4 ports detected [ 1.293937] NET: Registered protocol family 10 [ 1.297634] lo: Disabled Privacy Extensions [ 1.301212] lib80211: common routines for IEEE802.11 drivers [ 1.304630] lib80211_crypt: registered algorithm 'NULL' [ 1.304718] PM: Checking image partition /dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part1 [ 1.373750] Clocksource tsc unstable (delta = 105053647 ns) [ 1.468179] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 1.744920] usb 2-1: New USB device found, idVendor=07d1, idProduct=3c03 [ 1.748174] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.751629] usb 2-1: Product: 802.11 bg WLAN [ 1.752222] usb 2-1: Manufacturer: Ralink [ 1.756229] usb 2-1: configuration #1 chosen from 1 choice [ 1.816191] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.825145] ata2.00: configured for UDMA/33 [ 1.828490] ata2: EH complete [ 1.849188] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ862AS 1.50 PQ: 0 ANSI: 5 [ 1.872180] usb 2-4: new high speed USB device using ehci_hcd and address 3 [ 2.020659] usb 2-4: New USB device found, idVendor=04f2, idProduct=b008 [ 2.024179] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 2.028174] usb 2-4: Product: Chicony USB 2.0 Camera [ 2.032186] usb 2-4: Manufacturer: Chicony Electronics Co., Ltd. [ 2.036179] usb 2-4: SerialNumber: SN0001 [ 2.040227] usb 2-4: configuration #1 chosen from 1 choice [ 2.061781] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1e0b1, caps: 0xd04711/0xa00000 [ 2.100172] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1 [ 2.107764] PM: Resume from disk failed. [ 2.107764] registered taskstats version 1 [ 2.108284] Magic number: 5:560:447 [ 2.116240] rtc_cmos rtc_cmos: setting system clock to 2009-08-14 20:25:34 UTC (1250281534) [ 2.120250] Freeing unused kernel memory: 1048k freed [ 2.124417] Write protecting the kernel read-only data: 8880k [ 2.172834] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found [ 2.200730] udevd version 128 started [ 2.304751] usb 3-2: new low speed USB device using uhci_hcd and address 2 [ 2.488063] usb 3-2: New USB device found, idVendor=046d, idProduct=c50a [ 2.488180] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.492175] usb 3-2: Product: USB Receiver [ 2.496184] usb 3-2: Manufacturer: Logitech [ 2.500267] usb 3-2: configuration #1 chosen from 1 choice [ 2.526352] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input2 [ 2.532292] generic-usb 0003:046D:C50A.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-2/input0 [ 2.582500] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [ 2.582504] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 2.582508] PM: Marking nosave pages: 00000000b5aa1000 - 00000000b5aa7000 [ 2.582510] PM: Marking nosave pages: 00000000b5bba000 - 00000000b5c0f000 [ 2.582514] PM: Marking nosave pages: 00000000b5d08000 - 00000000b5f0f000 [ 2.582528] PM: Marking nosave pages: 00000000b5f18000 - 00000000b5f1f000 [ 2.582530] PM: Marking nosave pages: 00000000b5f65000 - 00000000b5f9f000 [ 2.582533] PM: Marking nosave pages: 00000000b5fe1000 - 00000000b5fff000 [ 2.582536] PM: Marking nosave pages: 00000000b6000000 - 0000000100000000 [ 2.584130] PM: Basic memory bitmaps created [ 2.601201] PM: Basic memory bitmaps freed [ 2.612893] PM: Starting manual resume from disk [ 2.612893] usb 1-1.1: new high speed USB device using ehci_hcd and address 4 [ 2.616210] PM: Resume from partition 8:1 [ 2.616212] PM: Checking hibernation image. [ 2.622678] PM: Resume from disk failed. [ 2.728487] usb 1-1.1: New USB device found, idVendor=059b, idProduct=0370 [ 2.735255] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 2.740181] usb 1-1.1: Product: External HD [ 2.744181] usb 1-1.1: Manufacturer: Iomega [ 2.752174] usb 1-1.1: SerialNumber: 152000000733 [ 2.756280] usb 1-1.1: configuration #1 chosen from 1 choice [ 2.764820] scsi6 : SCSI emulation for USB Mass Storage devices [ 2.772239] usb-storage: device found at 4 [ 2.772239] usb-storage: waiting for device to settle before scanning [ 2.844189] usb 1-1.2: new high speed USB device using ehci_hcd and address 5 [ 2.940200] usb 1-1.2: New USB device found, idVendor=1058, idProduct=1001 [ 2.944175] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.952181] usb 1-1.2: Product: External HDD [ 2.956180] usb 1-1.2: Manufacturer: Western Digital [ 2.960174] usb 1-1.2: SerialNumber: 574341505732323139323037 [ 2.968266] usb 1-1.2: configuration #1 chosen from 1 choice [ 2.975185] scsi7 : SCSI emulation for USB Mass Storage devices [ 2.976247] usb-storage: device found at 5 [ 2.976247] usb-storage: waiting for device to settle before scanning [ 3.048468] usb 1-1.4: new high speed USB device using ehci_hcd and address 6 [ 3.109563] kjournald starting. Commit interval 15 seconds [ 3.112242] EXT3 FS on sda2, internal journal [ 3.116176] EXT3-fs: mounted filesystem with ordered data mode. [ 3.148191] usb 1-1.4: New USB device found, idVendor=05e3, idProduct=0606 [ 3.152177] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.156174] usb 1-1.4: Product: USB2.0 Hub [ 3.160281] usb 1-1.4: configuration #1 chosen from 1 choice [ 3.164230] hub 1-1.4:1.0: USB hub found [ 3.168324] hub 1-1.4:1.0: 4 ports detected [ 3.448190] usb 1-1.4.2: new high speed USB device using ehci_hcd and address 7 [ 3.549027] usb 1-1.4.2: New USB device found, idVendor=05e3, idProduct=070e [ 3.552178] usb 1-1.4.2: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 3.560182] usb 1-1.4.2: Product: USB Storage [ 3.564174] usb 1-1.4.2: SerialNumber: 000000009601 [ 3.568265] usb 1-1.4.2: configuration #1 chosen from 1 choice [ 3.577704] scsi8 : SCSI emulation for USB Mass Storage devices [ 3.582932] usb-storage: device found at 7 [ 3.582932] usb-storage: waiting for device to settle before scanning [ 3.654024] usb 1-1.4.3: new high speed USB device using ehci_hcd and address 8 [ 3.749897] usb 1-1.4.3: New USB device found, idVendor=03f0, idProduct=5611 [ 3.752186] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.756175] usb 1-1.4.3: Product: Photosmart C3100 series [ 3.760182] usb 1-1.4.3: Manufacturer: HP [ 3.764174] usb 1-1.4.3: SerialNumber: MY68SC52KM04P9 [ 3.768243] usb 1-1.4.3: configuration #1 chosen from 1 choice [ 3.772350] scsi9 : SCSI emulation for USB Mass Storage devices [ 3.776227] usb-storage: device found at 8 [ 3.776227] usb-storage: waiting for device to settle before scanning [ 3.776227] scsi 6:0:0:0: Direct-Access ST336032 0AS PQ: 0 ANSI: 2 [ 3.780491] usb-storage: device scan complete [ 3.782182] sd 6:0:0:0: [sdb] 703282608 512-byte logical blocks: (360 GB/335 GiB) [ 3.790137] sd 6:0:0:0: [sdb] Write Protect is off [ 3.792175] sd 6:0:0:0: [sdb] Mode Sense: 38 00 00 00 [ 3.792178] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 3.800687] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 3.804177] sdb: [ 3.852193] usb 1-1.4.4: new high speed USB device using ehci_hcd and address 9 [ 3.977912] scsi 7:0:0:0: Direct-Access WD 5000AAJ External 1.06 PQ: 0 ANSI: 0 [ 3.980427] sd 7:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 3.988814] sd 7:0:0:0: [sdc] Write Protect is off [ 3.988814] usb-storage: device scan complete [ 3.992176] sd 7:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 3.992178] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 4.000250] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 4.004178] sdc: sdc1 [ 4.010152] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 4.014879] usb 1-1.4.4: New USB device found, idVendor=0402, idProduct=5621 [ 4.014882] usb 1-1.4.4: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 4.014884] usb 1-1.4.4: Product: USB 2.0 Storage Device [ 4.014885] usb 1-1.4.4: SerialNumber: 00042222200000014305 [ 4.014958] usb 1-1.4.4: configuration #1 chosen from 1 choice [ 4.036224] scsi10 : SCSI emulation for USB Mass Storage devices [ 4.036325] usb-storage: device found at 9 [ 4.036326] usb-storage: waiting for device to settle before scanning [ 4.040206] sd 7:0:0:0: [sdc] Attached SCSI disk [ 4.580189] scsi 8:0:0:0: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0 [ 4.585929] scsi 8:0:0:1: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0 [ 4.592185] scsi 8:0:0:2: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0 [ 4.596316] sd 8:0:0:0: [sdd] Attached SCSI removable disk [ 4.600397] scsi 8:0:0:3: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0 [ 4.608200] sd 8:0:0:1: [sde] Attached SCSI removable disk [ 4.612858] sd 8:0:0:2: [sdf] Attached SCSI removable disk [ 4.616552] sd 8:0:0:3: [sdg] Attached SCSI removable disk [ 4.620291] usb-storage: device scan complete [ 4.777878] scsi 9:0:0:0: Direct-Access HP Photosmart C3180 1.00 PQ: 0 ANSI: 2 [ 4.784189] sd 9:0:0:0: [sdh] Attached SCSI removable disk [ 4.784311] usb-storage: device scan complete [ 5.036229] scsi 10:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-W162C TS09 PQ: 0 ANSI: 0 [ 5.040319] usb-storage: device scan complete [ 5.349962] sdb1 [ 5.356821] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 5.360177] sd 6:0:0:0: [sdb] Attached SCSI disk [ 6.471968] udevd version 128 started [ 6.901429] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.904222] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 6.908210] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 6.912206] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 6.916217] sd 8:0:0:0: Attached scsi generic sg4 type 0 [ 6.920210] sd 8:0:0:1: Attached scsi generic sg5 type 0 [ 6.924237] sd 8:0:0:2: Attached scsi generic sg6 type 0 [ 6.928239] sd 8:0:0:3: Attached scsi generic sg7 type 0 [ 6.932226] sd 9:0:0:0: Attached scsi generic sg8 type 0 [ 6.936265] scsi 10:0:0:0: Attached scsi generic sg9 type 5 [ 6.956491] usblp0: USB Bidirectional printer dev 8 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5611 [ 6.960212] usbcore: registered new interface driver usblp [ 7.025117] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 7.028189] Uniform CD-ROM driver Revision: 3.20 [ 7.032282] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 7.054136] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 7.056312] sr 10:0:0:0: Attached scsi CD-ROM sr1 [ 7.087638] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset [ 7.092838] agpgart-intel 0000:00:00.0: detected 131068K stolen memory [ 7.098186] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 7.144451] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 7.370234] sky2 driver version 1.23 [ 7.370234] iTCO_vendor_support: vendor-support=0 [ 7.372279] sky2 0000:07:00.0: using bridge 0000:00:1c.4 INT A to get IRQ 17 [ 7.376179] sky2 0000:07:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17 [ 7.380202] sky2 0000:07:00.0: setting latency timer to 64 [ 7.380241] sky2 0000:07:00.0: Yukon-2 FE+ chip revision 0 [ 7.384273] alloc irq_desc for 28 on node 0 [ 7.384276] alloc kstat_irqs on node 0 [ 7.384293] sky2 0000:07:00.0: irq 28 for MSI/MSI-X [ 7.388499] sky2 eth0: addr 00:23:8b:67:11:3b [ 7.409544] i801_smbus 0000:00:1f.3: PCI->APIC IRQ transform: INT C -> IRQ 19 [ 7.425413] ohci1394 0000:0a:01.0: can't find IRQ for PCI INT B; probably buggy MP table [ 7.448599] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 7.452266] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460) [ 7.456239] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 7.467508] sdhci: Secure Digital Host Controller Interface driver [ 7.472201] sdhci: Copyright(c) Pierre Ossman [ 7.486896] ohci1394: Failed to allocate interrupt 0 [ 7.488274] ohci1394: probe of 0000:0a:01.0 failed with error -16 [ 7.494261] sdhci-pci 0000:0a:01.2: SDHCI controller found [1217:7120] (rev 2) [ 7.496203] sdhci-pci 0000:0a:01.2: can't find IRQ for PCI INT B; probably buggy MP table [ 7.500218] mmc0: Unknown controller version (2). You may experience problems. [ 7.508203] sdhci-pci: probe of 0000:0a:01.2 failed with error -16 [ 7.532236] cfg80211: Calling CRDA to update world regulatory domain [ 7.776185] Linux video capture interface: v2.00 [ 7.857465] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008) [ 7.865363] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input4 [ 7.868257] usbcore: registered new interface driver uvcvideo [ 7.872176] USB Video Class driver (v0.1.0) [ 8.205251] cfg80211: World regulatory domain updated: [ 8.208177] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.216176] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.387470] HDA Intel 0000:00:1b.0: PCI->APIC IRQ transform: INT A -> IRQ 22 [ 8.388227] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 8.513011] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds [ 8.516188] iwlagn: Copyright(c) 2003-2009 Intel Corporation [ 8.525018] iwlagn 0000:08:00.0: using bridge 0000:00:1c.5 INT A to get IRQ 17 [ 8.528203] iwlagn 0000:08:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17 [ 8.532185] iwlagn 0000:08:00.0: setting latency timer to 64 [ 8.532231] iwlagn 0000:08:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 [ 8.576463] iwlagn 0000:08:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 8.580233] alloc irq_desc for 29 on node 0 [ 8.580235] alloc kstat_irqs on node 0 [ 8.580255] iwlagn 0000:08:00.0: irq 29 for MSI/MSI-X [ 8.602336] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 8.604260] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 8.608233] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 8.620143] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 8.841785] phy1: Selected rate control algorithm 'minstrel' [ 8.844392] Registered led device: rt73usb-phy1::radio [ 8.848199] Registered led device: rt73usb-phy1::assoc [ 8.855139] Registered led device: rt73usb-phy1::quality [ 8.860273] usbcore: registered new interface driver rt73usb [ 9.228173] Adding 4200956k swap on /dev/sda1. Priority:-1 extents:1 across:4200956k [ 10.388173] device-mapper: uevent: version 1.0.3 [ 10.393726] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 10.772888] loop: module loaded [ 10.975572] fuse init (API version 7.12) [ 14.486654] type=1505 audit(1250277947.220:2): operation="profile_load" pid=1903 name=/bin/ping [ 14.511501] type=1505 audit(1250277947.240:3): operation="profile_load" pid=1904 name=/sbin/klogd [ 14.554315] type=1505 audit(1250277947.284:4): operation="profile_load" pid=1905 name=/sbin/syslog-ng [ 14.598044] type=1505 audit(1250277947.328:5): operation="profile_load" pid=1906 name=/sbin/syslogd [ 14.644290] type=1505 audit(1250277947.376:6): operation="profile_load" pid=1907 name=/usr/sbin/avahi-daemon [ 14.683338] type=1505 audit(1250277947.416:7): operation="profile_load" pid=1908 name=/usr/sbin/identd [ 14.726178] type=1505 audit(1250277947.456:8): operation="profile_load" pid=1909 name=/usr/sbin/mdnsd [ 14.773905] type=1505 audit(1250277947.504:9): operation="profile_load" pid=1910 name=/usr/sbin/nscd [ 14.835516] type=1505 audit(1250277947.568:10): operation="profile_load" pid=1918 name=/usr/sbin/ntpd [ 14.877561] type=1505 audit(1250277947.608:11): operation="profile_load" pid=1924 name=/usr/sbin/traceroute [ 17.664895] powernow_k8: Unknown symbol acpi_processor_notify_smm [ 17.664895] powernow_k8: Unknown symbol acpi_processor_unregister_performance [ 17.664946] powernow_k8: Unknown symbol acpi_processor_register_performance [ 17.716685] acpi_cpufreq: Unknown symbol acpi_processor_notify_smm [ 17.716764] acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance [ 17.716976] acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance [ 17.717053] acpi_cpufreq: Unknown symbol acpi_processor_register_performance [ 32.018349] [drm] Initialized drm 1.1.0 20060810 [ 32.084264] pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 32.084269] pci 0000:00:02.0: setting latency timer to 64 [ 32.098357] alloc irq_desc for 30 on node 0 [ 32.098361] alloc kstat_irqs on node 0 [ 32.098371] pci 0000:00:02.0: irq 30 for MSI/MSI-X [ 32.098433] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 34.926521] Bluetooth: Core ver 2.15 [ 34.927421] NET: Registered protocol family 31 [ 34.927423] Bluetooth: HCI device and connection manager initialized [ 34.927426] Bluetooth: HCI socket layer initialized [ 35.861081] Bluetooth: L2CAP ver 2.13 [ 35.861084] Bluetooth: L2CAP socket layer initialized [ 35.961444] Bluetooth: RFCOMM TTY layer initialized [ 35.961448] Bluetooth: RFCOMM socket layer initialized [ 35.961450] Bluetooth: RFCOMM ver 1.11 [ 36.570360] Bluetooth: SCO (Voice Link) ver 0.6 [ 36.570362] Bluetooth: SCO socket layer initialized [ 36.978073] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 36.978076] Bluetooth: BNEP filters: protocol multicast [ 37.254615] Bridge firewalling registered [ 43.619183] bootsplash: status on console 0 changed to on [ 45.010967] sky2 eth0: enabling interface [ 45.011587] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 45.012065] rt73usb 2-1:1.0: firmware: requesting rt73.bin [ 45.213123] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 45.213547] iwlagn 0000:08:00.0: firmware: requesting iwlwifi-5000-2.ucode [ 45.284955] iwlagn 0000:08:00.0: loaded firmware version 8.24.2.12 [ 45.420346] Registered led device: iwl-phy0::radio [ 45.420363] Registered led device: iwl-phy0::assoc [ 45.420377] Registered led device: iwl-phy0::RX [ 45.420390] Registered led device: iwl-phy0::TX [ 45.436813] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 45.525796] NET: Registered protocol family 17 [ 47.368165] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both [ 47.368797] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 58.108177] eth0: no IPv6 routers present [ 86.750185] [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0