[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-rc5-git3-10-default (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2009-08-05 22:36:33 +0200 [ 0.000000] Command line: root=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part2 repair=1 resume=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part1 splash=silent elevator=cfq vga=0x317 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000b5aa1000 (usable) [ 0.000000] BIOS-e820: 00000000b5aa1000 - 00000000b5aa7000 (reserved) [ 0.000000] BIOS-e820: 00000000b5aa7000 - 00000000b5bba000 (usable) [ 0.000000] BIOS-e820: 00000000b5bba000 - 00000000b5c0f000 (reserved) [ 0.000000] BIOS-e820: 00000000b5c0f000 - 00000000b5d08000 (usable) [ 0.000000] BIOS-e820: 00000000b5d08000 - 00000000b5f0f000 (reserved) [ 0.000000] BIOS-e820: 00000000b5f0f000 - 00000000b5f18000 (usable) [ 0.000000] BIOS-e820: 00000000b5f18000 - 00000000b5f1f000 (reserved) [ 0.000000] BIOS-e820: 00000000b5f1f000 - 00000000b5f65000 (usable) [ 0.000000] BIOS-e820: 00000000b5f65000 - 00000000b5f9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000b5f9f000 - 00000000b5fe1000 (usable) [ 0.000000] BIOS-e820: 00000000b5fe1000 - 00000000b5fff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000b5fff000 - 00000000b6000000 (usable) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 100000000 mask FC0000000 write-back [ 0.000000] 3 base 0B8000000 mask FF8000000 uncachable [ 0.000000] 4 base 0B7E00000 mask FFFE00000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000b7e00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xb6000 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f400 (usable) [ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000b5aa1000 (usable) [ 0.000000] modified: 00000000b5aa1000 - 00000000b5aa7000 (reserved) [ 0.000000] modified: 00000000b5aa7000 - 00000000b5bba000 (usable) [ 0.000000] modified: 00000000b5bba000 - 00000000b5c0f000 (reserved) [ 0.000000] modified: 00000000b5c0f000 - 00000000b5d08000 (usable) [ 0.000000] modified: 00000000b5d08000 - 00000000b5f0f000 (reserved) [ 0.000000] modified: 00000000b5f0f000 - 00000000b5f18000 (usable) [ 0.000000] modified: 00000000b5f18000 - 00000000b5f1f000 (reserved) [ 0.000000] modified: 00000000b5f1f000 - 00000000b5f65000 (usable) [ 0.000000] modified: 00000000b5f65000 - 00000000b5f9f000 (ACPI NVS) [ 0.000000] modified: 00000000b5f9f000 - 00000000b5fe1000 (usable) [ 0.000000] modified: 00000000b5fe1000 - 00000000b5fff000 (ACPI data) [ 0.000000] modified: 00000000b5fff000 - 00000000b6000000 (usable) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000b6000000 [ 0.000000] 0000000000 - 00b6000000 page 2M [ 0.000000] kernel direct mapping tables up to b6000000 @ 8000-c000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000 [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ a000-10000 [ 0.000000] RAMDISK: 37a98000 - 37fef362 [ 0.000000] ACPI: RSDP 00000000000f6e60 00024 (v02 TOSQCI) [ 0.000000] ACPI: XSDT 00000000b5ff4a00 0007C (v01 TOSQCI TOSQCI00 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 00000000b5fe5000 000F4 (v03 T0SQCI TOSQCI00 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT 00000000b5fe6000 09F7C (v02 TOSQCI CANTIGA 06040000 INTL 20061109) [ 0.000000] ACPI: FACS 00000000b5f9efc0 00040 [ 0.000000] ACPI: APIC 00000000b5ffed1e 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: HPET 00000000b5ffed86 00038 (v01 TOSQCI TOSQCI00 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 00000000b5ffedbe 0003C (v01 TOSQCI TOSQCI00 06040000 LOHR 0000005A) [ 0.000000] ACPI: APIC 00000000b5ffedfa 00068 (v01 PTLTD APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000b5ffee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC 00000000b5ffee8a 00176 (v01 TOSQCI TOSQCI00 06040000 LTP 00000000) [ 0.000000] ACPI: SSDT 00000000b5ff4aa4 00196 (v01 SataRe SataAhci 00001000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000b5fe4000 00655 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000b5fe3000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000b5fe2000 0020F (v01 PmRef ApTst 00003000 INTL 20061109) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [000000000000b000 - 0000000000022fff] [ 0.000000] bootmap [0000000000023000 - 000000000004afff] pages 28 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001c76630] TEXT DATA BSS ==> [0001000000 - 0001c76630] [ 0.000000] #3 [0037a98000 - 0037fef362] RAMDISK ==> [0037a98000 - 0037fef362] [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] [ 0.000000] #5 [0001c77000 - 0001c771e4] BRK ==> [0001c77000 - 0001c771e4] [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000] [ 0.000000] found SMP MP-table at [ffff8800000f6f20] f6f20 [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880001e00000-ffff8800055fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[10] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000b5aa1 [ 0.000000] 0: 0x000b5aa7 -> 0x000b5bba [ 0.000000] 0: 0x000b5c0f -> 0x000b5d08 [ 0.000000] 0: 0x000b5f0f -> 0x000b5f18 [ 0.000000] 0: 0x000b5f1f -> 0x000b5f65 [ 0.000000] 0: 0x000b5f9f -> 0x000b5fe1 [ 0.000000] 0: 0x000b5fff -> 0x000b6000 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1006809 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3836 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 726391 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000b5aa1000 - 00000000b5aa7000 [ 0.000000] PM: Registered nosave memory: 00000000b5bba000 - 00000000b5c0f000 [ 0.000000] PM: Registered nosave memory: 00000000b5d08000 - 00000000b5f0f000 [ 0.000000] PM: Registered nosave memory: 00000000b5f18000 - 00000000b5f1f000 [ 0.000000] PM: Registered nosave memory: 00000000b5f65000 - 00000000b5f9f000 [ 0.000000] PM: Registered nosave memory: 00000000b5fe1000 - 00000000b5fff000 [ 0.000000] PM: Registered nosave memory: 00000000b6000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at b6000000 (gap: b6000000:4a000000) [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages at ffff88000564b000, static data 82912 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 988787 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part2 repair=1 resume=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part1 splash=silent elevator=cfq vga=0x317 [ 0.000000] bootsplash: silent mode. [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff88000568c000 - ffff88000968c000 [ 0.000000] software IO TLB at phys 0x568c000 - 0x968c000 [ 0.000000] Memory: 3884988k/5242880k available (5578k kernel code, 1215644k absent, 142248k reserved, 4455k data, 1048k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2526.834 MHz processor. [ 0.000084] Console: colour dummy device 80x25 [ 0.000087] console [tty0] enabled [ 0.000509] hpet clockevent registered [ 0.000515] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.000523] Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.66 BogoMIPS (lpj=10107336) [ 0.007517] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved [ 0.007625] Security Framework initialized [ 0.007647] AppArmor: AppArmor initialized [ 0.007948] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.009964] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.011452] Mount-cache hash table entries: 256 [ 0.011619] Initializing cgroup subsys ns [ 0.011626] Initializing cgroup subsys cpuacct [ 0.011631] Initializing cgroup subsys memory [ 0.011648] Initializing cgroup subsys devices [ 0.011652] Initializing cgroup subsys freezer [ 0.011655] Initializing cgroup subsys net_cls [ 0.011683] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.011687] CPU: L2 cache: 3072K [ 0.011692] CPU 0/0x0 -> Node 0 [ 0.011695] CPU: Physical Processor ID: 0 [ 0.011697] CPU: Processor Core ID: 0 [ 0.011702] mce: CPU supports 6 MCE banks [ 0.011711] CPU0: Thermal monitoring enabled (TM2) [ 0.011716] using mwait in idle threads. [ 0.011719] Performance Counters: Core2 events, Intel PMU driver. [ 0.011727] ... version: 2 [ 0.011729] ... bit width: 40 [ 0.011732] ... generic counters: 2 [ 0.011734] ... value mask: 000000ffffffffff [ 0.011737] ... max period: 000000007fffffff [ 0.011740] ... fixed-purpose counters: 3 [ 0.011743] ... counter mask: 0000000700000003 [ 0.013898] ACPI: Core revision 20090521 [ 0.032069] Setting APIC routing to flat [ 0.032413] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.074973] CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a [ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 5053.97 BogoMIPS (lpj=10107954) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU 1/0x1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.161539] CPU1: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a [ 0.161567] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.164027] Brought up 2 CPUs [ 0.164027] Total of 2 processors activated (10107.64 BogoMIPS). [ 0.164086] CPU0 attaching sched-domain: [ 0.164088] domain 0: span 0-1 level MC [ 0.164091] groups: 0 1 [ 0.164096] CPU1 attaching sched-domain: [ 0.164097] domain 0: span 0-1 level MC [ 0.164099] groups: 1 0 [ 0.164152] devtmpfs: initialized [ 0.169228] Booting paravirtualized kernel on bare hardware [ 0.169230] regulator: core version 0.5 [ 0.169230] Time: 19:09:39 Date: 08/14/09 [ 0.169230] NET: Registered protocol family 16 [ 0.169230] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.169230] ACPI: bus type pci registered [ 0.169230] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.169230] PCI: Not using MMCONFIG. [ 0.169230] PCI: Using configuration type 1 for base access [ 0.169230] bio: create slab at 0 [ 0.169321] ACPI: EC: Look up EC in DSDT [ 0.176414] ACPI: BIOS _OSI(Linux) query ignored [ 0.180020] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.692004] ACPI: EC: missing confirmations, switch off interrupt mode. [ 1.336113] ACPI: Interpreter enabled [ 1.336118] ACPI: (supports S0 S3 S4 S5) [ 1.336144] ACPI: Using IOAPIC for interrupt routing [ 1.336198] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 1.340177] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 1.351152] PCI: Using MMCONFIG at e0000000 - efffffff [ 1.357550] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 1.357555] ACPI: EC: driver started in poll mode [ 1.357979] ACPI: No dock devices found. [ 1.358648] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 1.358738] pci 0000:00:02.0: reg 10 64bit mmio: [0xf4000000-0xf43fffff] [ 1.358744] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] [ 1.358748] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] [ 1.358781] pci 0000:00:02.1: reg 10 64bit mmio: [0xf4400000-0xf44fffff] [ 1.358900] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f] [ 1.358991] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f] [ 1.359082] pci 0000:00:1a.2: reg 20 io port: [0x1860-0x187f] [ 1.359175] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf4a04800-0xf4a04bff] [ 1.359242] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 1.359250] pci 0000:00:1a.7: PME# disabled [ 1.359306] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf4800000-0xf4803fff] [ 1.359364] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.359370] pci 0000:00:1b.0: PME# disabled [ 1.359453] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.359459] pci 0000:00:1c.0: PME# disabled [ 1.359551] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 1.359556] pci 0000:00:1c.4: PME# disabled [ 1.359642] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 1.359648] pci 0000:00:1c.5: PME# disabled [ 1.359721] pci 0000:00:1d.0: reg 20 io port: [0x1880-0x189f] [ 1.359811] pci 0000:00:1d.1: reg 20 io port: [0x18a0-0x18bf] [ 1.359902] pci 0000:00:1d.2: reg 20 io port: [0x18c0-0x18df] [ 1.359995] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf4a04c00-0xf4a04fff] [ 1.360067] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.360074] pci 0000:00:1d.7: PME# disabled [ 1.360318] pci 0000:00:1f.2: reg 10 io port: [0x1818-0x181f] [ 1.360324] pci 0000:00:1f.2: reg 14 io port: [0x180c-0x180f] [ 1.360332] pci 0000:00:1f.2: reg 18 io port: [0x1810-0x1817] [ 1.360339] pci 0000:00:1f.2: reg 1c io port: [0x1808-0x180b] [ 1.360346] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff] [ 1.360353] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf4a04000-0xf4a047ff] [ 1.360399] pci 0000:00:1f.2: PME# supported from D3hot [ 1.360405] pci 0000:00:1f.2: PME# disabled [ 1.360444] pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff] [ 1.360462] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f] [ 1.360549] pci 0000:00:1c.0: bridge io port: [0x00-0xfff] [ 1.360553] pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff] [ 1.360561] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x000000-0x0fffff] [ 1.360631] pci 0000:07:00.0: reg 10 64bit mmio: [0x000000-0x003fff] [ 1.360642] pci 0000:07:00.0: reg 18 io port: [0x00-0xff] [ 1.360725] pci 0000:07:00.0: supports D1 D2 [ 1.360726] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.360735] pci 0000:07:00.0: PME# disabled [ 1.360811] pci 0000:00:1c.4: bridge io port: [0x00-0xfff] [ 1.360816] pci 0000:00:1c.4: bridge 32bit mmio: [0x000000-0x0fffff] [ 1.360823] pci 0000:00:1c.4: bridge 64bit mmio pref: [0x000000-0x0fffff] [ 1.360910] pci 0000:08:00.0: reg 10 64bit mmio: [0x000000-0x001fff] [ 1.361023] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 1.361031] pci 0000:08:00.0: PME# disabled [ 1.361115] pci 0000:00:1c.5: bridge io port: [0x00-0xfff] [ 1.361119] pci 0000:00:1c.5: bridge 32bit mmio: [0x000000-0x0fffff] [ 1.361126] pci 0000:00:1c.5: bridge 64bit mmio pref: [0x000000-0x0fffff] [ 1.361169] pci 0000:0a:01.0: reg 10 32bit mmio: [0xff501000-0xff501fff] [ 1.361176] pci 0000:0a:01.0: reg 14 32bit mmio: [0xf4700000-0xf47007ff] [ 1.361226] pci 0000:0a:01.0: supports D1 D2 [ 1.361228] pci 0000:0a:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.361234] pci 0000:0a:01.0: PME# disabled [ 1.361282] pci 0000:0a:01.2: reg 10 32bit mmio: [0xf4700800-0xf47008ff] [ 1.361347] pci 0000:0a:01.2: supports D1 D2 [ 1.361349] pci 0000:0a:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 1.361355] pci 0000:0a:01.2: PME# disabled [ 1.361403] pci 0000:0a:01.3: reg 10 32bit mmio: [0xf4702000-0xf4702fff] [ 1.361469] pci 0000:0a:01.3: supports D1 D2 [ 1.361471] pci 0000:0a:01.3: PME# supported from D0 D1 D2 D3hot D3cold [ 1.361477] pci 0000:0a:01.3: PME# disabled [ 1.361544] pci 0000:00:1e.0: transparent bridge [ 1.361552] pci 0000:00:1e.0: bridge 32bit mmio: [0xf4700000-0xf47fffff] [ 1.361587] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.361746] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 1.361857] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 1.361942] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 1.375708] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 1.375834] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 1.375957] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 *6 7 10 12 14 15) [ 1.376085] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 1.376209] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 1.376333] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 1.376457] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 1.376579] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15) [ 1.376768] SCSI subsystem initialized [ 1.378382] libata version 3.00 loaded. [ 1.378382] usbcore: registered new interface driver usbfs [ 1.378382] usbcore: registered new interface driver hub [ 1.378382] usbcore: registered new device driver usb [ 1.378382] PCI: Using ACPI for IRQ routing [ 1.378382] pci 0000:00:1c.0: BAR 13: can't allocate resource [ 1.378382] pci 0000:00:1c.0: BAR 14: can't allocate resource [ 1.378382] pci 0000:00:1c.0: BAR 15: can't allocate resource [ 1.378382] pci 0000:00:1c.4: BAR 13: can't allocate resource [ 1.378382] pci 0000:00:1c.4: BAR 14: can't allocate resource [ 1.378382] pci 0000:00:1c.4: BAR 15: can't allocate resource [ 1.378382] pci 0000:00:1c.5: BAR 13: can't allocate resource [ 1.378382] pci 0000:00:1c.5: BAR 14: can't allocate resource [ 1.378382] pci 0000:00:1c.5: BAR 15: can't allocate resource [ 1.388030] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 1.388038] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 1.393085] AppArmor: AppArmor Filesystem Enabled [ 1.396011] Switched to high resolution mode on CPU 0 [ 1.397590] Switched to high resolution mode on CPU 1 [ 1.401008] pnp: PnP ACPI init [ 1.401019] ACPI: bus type pnp registered [ 1.402250] pnp 00:04: io resource (0x2e-0x2f) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 1.402257] pnp 00:04: io resource (0x4e-0x4f) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 1.402262] pnp 00:04: io resource (0x61-0x61) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 1.402267] pnp 00:04: io resource (0x63-0x63) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 1.402272] pnp 00:04: io resource (0x65-0x65) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 1.402278] pnp 00:04: io resource (0x67-0x67) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 1.402283] pnp 00:04: io resource (0x68-0x68) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 1.402288] pnp 00:04: io resource (0x6c-0x6c) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 1.402293] pnp 00:04: io resource (0x70-0x70) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 1.402298] pnp 00:04: io resource (0x80-0x80) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 1.402303] pnp 00:04: io resource (0x92-0x92) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 1.402308] pnp 00:04: io resource (0xb2-0xb3) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 1.403684] pnp: PnP ACPI: found 9 devices [ 1.403689] ACPI: ACPI bus type pnp unregistered [ 1.403700] system 00:02: iomem range 0xfed00000-0xfed003ff has been reserved [ 1.403708] system 00:04: ioport range 0x3e0-0x3e1 has been reserved [ 1.403712] system 00:04: ioport range 0x400-0x47f has been reserved [ 1.403716] system 00:04: ioport range 0x680-0x69f has been reserved [ 1.403720] system 00:04: ioport range 0x480-0x48f has been reserved [ 1.403724] system 00:04: ioport range 0xffff-0xffff has been reserved [ 1.403729] system 00:04: ioport range 0xffff-0xffff has been reserved [ 1.403733] system 00:04: ioport range 0x1180-0x11ff has been reserved [ 1.403737] system 00:04: ioport range 0x164e-0x164f has been reserved [ 1.403741] system 00:04: ioport range 0xfe00-0xfe00 has been reserved [ 1.403749] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 1.403753] system 00:08: iomem range 0xfed10000-0xfed13fff has been reserved [ 1.403758] system 00:08: iomem range 0xfed18000-0xfed18fff has been reserved [ 1.403762] system 00:08: iomem range 0xfed19000-0xfed19fff has been reserved [ 1.403766] system 00:08: iomem range 0xe0000000-0xefffffff has been reserved [ 1.403771] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved [ 1.403775] system 00:08: iomem range 0xfed45000-0xfed8ffff has been reserved [ 1.408553] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 1.408557] pci 0000:00:1c.0: IO window: disabled [ 1.408564] pci 0000:00:1c.0: MEM window: disabled [ 1.408569] pci 0000:00:1c.0: PREFETCH window: disabled [ 1.408588] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07 [ 1.408593] pci 0000:00:1c.4: IO window: 0x2000-0x2fff [ 1.408600] pci 0000:00:1c.4: MEM window: 0xb6000000-0xb60fffff [ 1.408606] pci 0000:00:1c.4: PREFETCH window: disabled [ 1.408623] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08 [ 1.408626] pci 0000:00:1c.5: IO window: disabled [ 1.408633] pci 0000:00:1c.5: MEM window: 0xb6100000-0xb61fffff [ 1.408639] pci 0000:00:1c.5: PREFETCH window: disabled [ 1.408645] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a [ 1.408648] pci 0000:00:1e.0: IO window: disabled [ 1.408655] pci 0000:00:1e.0: MEM window: 0xf4700000-0xf47fffff [ 1.408661] pci 0000:00:1e.0: PREFETCH window: disabled [ 1.408676] alloc irq_desc for 17 on node 0 [ 1.408678] alloc kstat_irqs on node 0 [ 1.408683] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.408691] pci 0000:00:1c.0: setting latency timer to 64 [ 1.408699] pci 0000:00:1c.4: enabling device (0000 -> 0003) [ 1.408704] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.408712] pci 0000:00:1c.4: setting latency timer to 64 [ 1.408719] pci 0000:00:1c.5: enabling device (0000 -> 0002) [ 1.408724] alloc irq_desc for 16 on node 0 [ 1.408726] alloc kstat_irqs on node 0 [ 1.408729] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.408736] pci 0000:00:1c.5: setting latency timer to 64 [ 1.408744] pci 0000:00:1e.0: setting latency timer to 64 [ 1.408748] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 1.408751] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 1.408754] pci_bus 0000:02: resource 0 mem: [0x0-0xfff] [ 1.408756] pci_bus 0000:02: resource 1 mem: [0x0-0xfffff] [ 1.408758] pci_bus 0000:02: resource 2 mem: [0x0-0xfffff] [ 1.408760] pci_bus 0000:07: resource 0 io: [0x2000-0x2fff] [ 1.408762] pci_bus 0000:07: resource 1 mem: [0xb6000000-0xb60fffff] [ 1.408764] pci_bus 0000:07: resource 2 mem: [0x0-0xfffff] [ 1.408766] pci_bus 0000:08: resource 0 mem: [0x0-0xfff] [ 1.408768] pci_bus 0000:08: resource 1 mem: [0xb6100000-0xb61fffff] [ 1.408770] pci_bus 0000:08: resource 2 mem: [0x0-0xfffff] [ 1.408772] pci_bus 0000:0a: resource 1 mem: [0xf4700000-0xf47fffff] [ 1.408774] pci_bus 0000:0a: resource 3 io: [0x00-0xffff] [ 1.408776] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff] [ 1.408833] NET: Registered protocol family 2 [ 1.408998] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.410088] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.413765] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.414243] TCP: Hash tables configured (established 524288 bind 65536) [ 1.414248] TCP reno registered [ 1.414402] NET: Registered protocol family 1 [ 1.414470] Unpacking initramfs... [ 1.498885] Freeing initrd memory: 5468k freed [ 1.500909] Simple Boot Flag at 0x36 set to 0x1 [ 1.501219] Scanning for low memory corruption every 60 seconds [ 1.501420] audit: initializing netlink socket (disabled) [ 1.501439] type=2000 audit(1250276980.501:1): initialized [ 1.508437] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.508567] VFS: Disk quotas dquot_6.5.2 [ 1.508602] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.508736] msgmni has been set to 1899 [ 1.508953] alg: No test for stdrng (krng) [ 1.508980] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.508986] io scheduler noop registered [ 1.508989] io scheduler anticipatory registered [ 1.508992] io scheduler deadline registered [ 1.509014] io scheduler cfq registered (default) [ 1.509080] pci 0000:00:02.0: Boot video device [ 1.509384] alloc irq_desc for 24 on node 0 [ 1.509387] alloc kstat_irqs on node 0 [ 1.509399] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X [ 1.509410] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.509577] alloc irq_desc for 25 on node 0 [ 1.509579] alloc kstat_irqs on node 0 [ 1.509587] pcieport-driver 0000:00:1c.4: irq 25 for MSI/MSI-X [ 1.509597] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 1.509760] alloc irq_desc for 26 on node 0 [ 1.509762] alloc kstat_irqs on node 0 [ 1.509770] pcieport-driver 0000:00:1c.5: irq 26 for MSI/MSI-X [ 1.509780] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 1.510184] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011100000, using 6144k, total 131008k [ 1.510190] vesafb: mode is 1024x768x16, linelength=2048, pages=84 [ 1.510194] vesafb: scrolling: redraw [ 1.510197] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 1.510357] bootsplash 3.1.6-2004/03/31: looking for picture... [ 1.519317] bootsplash: silentjpeg size 100719 bytes [ 1.530201] bootsplash: ...found (1024x768, 38691 bytes, v3). [ 1.562026] Console: switching to colour frame buffer device 124x44 [ 1.605621] fb0: VESA VGA frame buffer device [ 1.607228] Non-volatile memory driver v1.3 [ 1.607326] Linux agpgart interface v0.103 [ 1.607421] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 1.607780] Platform driver 'serial8250' needs updating - please use dev_pm_ops [ 1.608291] ahci 0000:00:1f.2: version 3.0 [ 1.608308] alloc irq_desc for 19 on node 0 [ 1.608310] alloc kstat_irqs on node 0 [ 1.608317] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.608506] alloc irq_desc for 27 on node 0 [ 1.608508] alloc kstat_irqs on node 0 [ 1.608518] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X [ 1.608599] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 1.608786] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ems [ 1.608956] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.636049] scsi0 : ahci [ 1.636202] scsi1 : ahci [ 1.636307] scsi2 : ahci [ 1.636412] scsi3 : ahci [ 1.636514] scsi4 : ahci [ 1.636618] scsi5 : ahci [ 1.636819] ata1: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04100 irq 27 [ 1.636989] ata2: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04180 irq 27 [ 1.637157] ata3: DUMMY [ 1.637215] ata4: DUMMY [ 1.637272] ata5: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04300 irq 27 [ 1.639171] ata6: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04380 irq 27 [ 1.641168] Fixed MDIO Bus: probed [ 1.643108] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.645278] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 1.647529] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.647533] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.649850] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.656187] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.658622] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 1.658637] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf4a04800 [ 1.676008] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.678602] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.681316] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.684125] usb usb1: Product: EHCI Host Controller [ 1.686989] usb usb1: Manufacturer: Linux 2.6.31-rc5-git3-10-default ehci_hcd [ 1.690019] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.693163] usb usb1: configuration #1 chosen from 1 choice [ 1.696362] hub 1-0:1.0: USB hub found [ 1.699582] hub 1-0:1.0: 6 ports detected [ 1.702940] alloc irq_desc for 23 on node 0 [ 1.702942] alloc kstat_irqs on node 0 [ 1.702947] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.706412] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.706415] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.709908] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.717439] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.721084] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.721098] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4a04c00 [ 1.740008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.743788] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.747589] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.751370] usb usb2: Product: EHCI Host Controller [ 1.755151] usb usb2: Manufacturer: Linux 2.6.31-rc5-git3-10-default ehci_hcd [ 1.759029] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.762916] usb usb2: configuration #1 chosen from 1 choice [ 1.766732] hub 2-0:1.0: USB hub found [ 1.770444] hub 2-0:1.0: 6 ports detected [ 1.774157] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.777860] uhci_hcd: USB Universal Host Controller Interface driver [ 1.781578] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.785374] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.785377] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.789200] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.793176] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 [ 1.797192] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.801321] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.805425] usb usb3: Product: UHCI Host Controller [ 1.809579] usb usb3: Manufacturer: Linux 2.6.31-rc5-git3-10-default uhci_hcd [ 1.813775] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.818067] usb usb3: configuration #1 chosen from 1 choice [ 1.822312] hub 3-0:1.0: USB hub found [ 1.826577] hub 3-0:1.0: 2 ports detected [ 1.830853] alloc irq_desc for 21 on node 0 [ 1.830855] alloc kstat_irqs on node 0 [ 1.830859] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.835124] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.835127] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.839316] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.843581] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 [ 1.847812] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.852073] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.856380] usb usb4: Product: UHCI Host Controller [ 1.860693] usb usb4: Manufacturer: Linux 2.6.31-rc5-git3-10-default uhci_hcd [ 1.865045] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.869407] usb usb4: configuration #1 chosen from 1 choice [ 1.873725] hub 4-0:1.0: USB hub found [ 1.877963] hub 4-0:1.0: 2 ports detected [ 1.882230] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 1.886523] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 1.886526] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.890783] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.895142] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860 [ 1.899438] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.903770] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.908117] usb usb5: Product: UHCI Host Controller [ 1.912436] usb usb5: Manufacturer: Linux 2.6.31-rc5-git3-10-default uhci_hcd [ 1.916863] usb usb5: SerialNumber: 0000:00:1a.2 [ 1.921338] usb usb5: configuration #1 chosen from 1 choice [ 1.925767] hub 5-0:1.0: USB hub found [ 1.930141] hub 5-0:1.0: 2 ports detected [ 1.934538] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.938917] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.938921] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.943229] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.947616] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880 [ 1.951968] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.956399] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.960820] usb usb6: Product: UHCI Host Controller [ 1.965211] usb usb6: Manufacturer: Linux 2.6.31-rc5-git3-10-default uhci_hcd [ 1.969650] usb usb6: SerialNumber: 0000:00:1d.0 [ 1.973021] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.973044] ata5: SATA link down (SStatus 0 SControl 300) [ 1.973067] ata6: SATA link down (SStatus 0 SControl 300) [ 1.973086] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.973981] ACPI Warning: \_SB_.PCI0.SAT0.PRT0._GTF: Return type mismatch - found Integer, expected Buffer 20090521 nspredef-940 [ 1.973988] ata1.00: _GTF unexpected object type 0x1 [ 2.005017] ata2.00: ATAPI: MATSHITADVD-RAM UJ862AS, 1.50, max UDMA/33 [ 2.005064] usb usb6: configuration #1 chosen from 1 choice [ 2.005096] hub 6-0:1.0: USB hub found [ 2.005102] hub 6-0:1.0: 2 ports detected [ 2.023172] ata1.00: ATA-8: TOSHIBA MK3252GSX, LV010M, max UDMA/100 [ 2.027731] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.027748] ata2.00: configured for UDMA/33 [ 2.036896] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.041511] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.041514] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.041704] ata1.00: _GTF unexpected object type 0x1 [ 2.041844] ata1.00: configured for UDMA/100 [ 2.041947] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3252GS LV01 PQ: 0 ANSI: 5 [ 2.042104] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.042144] sd 0:0:0:0: [sda] Write Protect is off [ 2.042146] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.042166] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.042279] sda: [ 2.073516] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 2.082854] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0 [ 2.083678] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ862AS 1.50 PQ: 0 ANSI: 5 [ 2.092402] sda1 [ 2.092442] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.092444] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.092446] usb usb7: Product: UHCI Host Controller [ 2.092447] usb usb7: Manufacturer: Linux 2.6.31-rc5-git3-10-default uhci_hcd [ 2.092449] usb usb7: SerialNumber: 0000:00:1d.1 [ 2.092509] usb usb7: configuration #1 chosen from 1 choice [ 2.092533] hub 7-0:1.0: USB hub found [ 2.092539] hub 7-0:1.0: 2 ports detected [ 2.104030] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 2.139788] sda2 [ 2.144530] alloc irq_desc for 18 on node 0 [ 2.144532] alloc kstat_irqs on node 0 [ 2.144537] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.149386] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.149389] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.154138] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 2.154272] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.163684] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 [ 2.168460] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.173244] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.178017] usb usb8: Product: UHCI Host Controller [ 2.182774] usb usb8: Manufacturer: Linux 2.6.31-rc5-git3-10-default uhci_hcd [ 2.187687] usb usb8: SerialNumber: 0000:00:1d.2 [ 2.192628] usb usb8: configuration #1 chosen from 1 choice [ 2.197435] hub 8-0:1.0: USB hub found [ 2.202060] hub 8-0:1.0: 2 ports detected [ 2.206987] Initializing USB Mass Storage driver... [ 2.211592] usbcore: registered new interface driver usb-storage [ 2.216167] USB Mass Storage support registered. [ 2.220759] usbcore: registered new interface driver libusual [ 2.225417] usbcore: registered new interface driver ums-alauda [ 2.230001] usbcore: registered new interface driver ums-cypress [ 2.234503] usbcore: registered new interface driver ums-datafab [ 2.238926] usbcore: registered new interface driver ums-freecom [ 2.243255] usbcore: registered new interface driver ums-isd200 [ 2.247524] usbcore: registered new interface driver ums-jumpshot [ 2.251736] usbcore: registered new interface driver ums-karma [ 2.255904] usbcore: registered new interface driver ums-onetouch [ 2.259980] usbcore: registered new interface driver ums-sddr09 [ 2.263940] usbcore: registered new interface driver ums-sddr55 [ 2.267815] usbcore: registered new interface driver ums-usbat [ 2.271627] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.275455] Platform driver 'i8042' needs updating - please use dev_pm_ops [ 2.282572] i8042.c: Detected active multiplexing controller, rev 1.1. [ 2.288608] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.292387] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 2.296119] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 2.299761] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 2.303340] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 2.303608] usb 1-1: New USB device found, idVendor=05e3, idProduct=0606 [ 2.303610] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.303612] usb 1-1: Product: USB2.0 Hub [ 2.303662] usb 1-1: configuration #1 chosen from 1 choice [ 2.320827] hub 1-1:1.0: USB hub found [ 2.320867] mice: PS/2 mouse device common for all mice [ 2.327910] rtc_cmos 00:05: RTC can wake from S4 [ 2.328111] hub 1-1:1.0: 4 ports detected [ 2.334845] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 2.338365] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.341906] cpuidle: using governor ladder [ 2.345375] cpuidle: using governor menu [ 2.348996] usbcore: registered new interface driver hiddev [ 2.352389] usbcore: registered new interface driver usbhid [ 2.355696] usbhid: v2.6:USB HID core driver [ 2.355745] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.441631] TCP cubic registered [ 2.445021] NET: Registered protocol family 10 [ 2.448753] lo: Disabled Privacy Extensions [ 2.452349] lib80211: common routines for IEEE802.11 drivers [ 2.455770] lib80211_crypt: registered algorithm 'NULL' [ 2.455859] PM: Checking image partition /dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part1 [ 2.479468] PM: Resume from disk failed. [ 2.479483] registered taskstats version 1 [ 2.483003] Magic number: 5:695:192 [ 2.486393] acpi device:1e: hash matches [ 2.489742] rtc_cmos 00:05: setting system clock to 2009-08-14 19:09:42 UTC (1250276982) [ 2.493262] Freeing unused kernel memory: 1048k freed [ 2.497001] Write protecting the kernel read-only data: 8880k [ 2.513025] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 2.546749] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found [ 2.561088] udevd version 128 started [ 2.788178] usb 2-1: New USB device found, idVendor=07d1, idProduct=3c03 [ 2.792567] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.796822] usb 2-1: Product: 802.11 bg WLAN [ 2.800987] usb 2-1: Manufacturer: Ralink [ 2.805164] usb 2-1: configuration #1 chosen from 1 choice [ 2.853599] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [ 2.853602] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 2.853606] PM: Marking nosave pages: 00000000b5aa1000 - 00000000b5aa7000 [ 2.853608] PM: Marking nosave pages: 00000000b5bba000 - 00000000b5c0f000 [ 2.853611] PM: Marking nosave pages: 00000000b5d08000 - 00000000b5f0f000 [ 2.853625] PM: Marking nosave pages: 00000000b5f18000 - 00000000b5f1f000 [ 2.853626] PM: Marking nosave pages: 00000000b5f65000 - 00000000b5f9f000 [ 2.853629] PM: Marking nosave pages: 00000000b5fe1000 - 00000000b5fff000 [ 2.853632] PM: Marking nosave pages: 00000000b6000000 - 0000000100000000 [ 2.855225] PM: Basic memory bitmaps created [ 2.920013] usb 2-4: new high speed USB device using ehci_hcd and address 3 [ 3.066694] usb 2-4: New USB device found, idVendor=04f2, idProduct=b008 [ 3.066697] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 3.066699] usb 2-4: Product: Chicony USB 2.0 Camera [ 3.066701] usb 2-4: Manufacturer: Chicony Electronics Co., Ltd. [ 3.066703] usb 2-4: SerialNumber: SN0001 [ 3.066808] usb 2-4: configuration #1 chosen from 1 choice [ 3.188946] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1e0b1, caps: 0xd04711/0xa00000 [ 3.222488] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1 [ 3.284643] PM: Basic memory bitmaps freed [ 3.295065] PM: Starting manual resume from disk [ 3.299774] PM: Resume from partition 8:1 [ 3.299776] PM: Checking hibernation image. [ 3.300007] PM: Resume from disk failed. [ 3.310059] usb 3-2: new low speed USB device using uhci_hcd and address 2 [ 3.490304] usb 3-2: New USB device found, idVendor=046d, idProduct=c50a [ 3.495506] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.500679] usb 3-2: Product: USB Receiver [ 3.505783] usb 3-2: Manufacturer: Logitech [ 3.510919] usb 3-2: configuration #1 chosen from 1 choice [ 3.535577] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input2 [ 3.541107] generic-usb 0003:046D:C50A.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-2/input0 [ 3.624331] usb 1-1.1: new high speed USB device using ehci_hcd and address 4 [ 3.744327] usb 1-1.1: New USB device found, idVendor=059b, idProduct=0370 [ 3.749905] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 3.755438] usb 1-1.1: Product: External HD [ 3.760937] usb 1-1.1: Manufacturer: Iomega [ 3.766383] usb 1-1.1: SerialNumber: 152000000733 [ 3.771893] usb 1-1.1: configuration #1 chosen from 1 choice [ 3.778902] scsi6 : SCSI emulation for USB Mass Storage devices [ 3.784769] usb-storage: device found at 4 [ 3.784771] usb-storage: waiting for device to settle before scanning [ 3.828232] kjournald starting. Commit interval 15 seconds [ 3.834140] EXT3 FS on sda2, internal journal [ 3.839750] EXT3-fs: mounted filesystem with ordered data mode. [ 3.856348] usb 1-1.2: new high speed USB device using ehci_hcd and address 5 [ 3.954345] usb 1-1.2: New USB device found, idVendor=1058, idProduct=1001 [ 3.960302] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.966084] usb 1-1.2: Product: External HDD [ 3.971779] usb 1-1.2: Manufacturer: Western Digital [ 3.971781] usb 1-1.2: SerialNumber: 574341505732323139323037 [ 3.971892] usb 1-1.2: configuration #1 chosen from 1 choice [ 3.989252] scsi7 : SCSI emulation for USB Mass Storage devices [ 3.994989] usb-storage: device found at 5 [ 3.994991] usb-storage: waiting for device to settle before scanning [ 4.065230] usb 1-1.4: new high speed USB device using ehci_hcd and address 6 [ 4.161358] usb 1-1.4: New USB device found, idVendor=05e3, idProduct=0606 [ 4.167126] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.167128] usb 1-1.4: Product: USB2.0 Hub [ 4.167215] usb 1-1.4: configuration #1 chosen from 1 choice [ 4.172902] hub 1-1.4:1.0: USB hub found [ 4.173234] hub 1-1.4:1.0: 4 ports detected [ 4.464256] usb 1-1.4.2: new high speed USB device using ehci_hcd and address 7 [ 4.564012] usb 1-1.4.2: New USB device found, idVendor=05e3, idProduct=070e [ 4.569328] usb 1-1.4.2: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 4.574569] usb 1-1.4.2: Product: USB Storage [ 4.579700] usb 1-1.4.2: SerialNumber: 000000009601 [ 4.584849] usb 1-1.4.2: configuration #1 chosen from 1 choice [ 4.591049] scsi8 : SCSI emulation for USB Mass Storage devices [ 4.596108] usb-storage: device found at 7 [ 4.596111] usb-storage: waiting for device to settle before scanning [ 4.668275] usb 1-1.4.3: new high speed USB device using ehci_hcd and address 8 [ 4.764899] usb 1-1.4.3: New USB device found, idVendor=03f0, idProduct=5611 [ 4.769869] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.774873] usb 1-1.4.3: Product: Photosmart C3100 series [ 4.779885] usb 1-1.4.3: Manufacturer: HP [ 4.784723] usb 1-1.4.3: SerialNumber: MY68SC52KM04P9 [ 4.789534] usb 1-1.4.3: configuration #1 chosen from 1 choice [ 4.794293] scsi 6:0:0:0: Direct-Access ST336032 0AS PQ: 0 ANSI: 2 [ 4.799324] scsi9 : SCSI emulation for USB Mass Storage devices [ 4.804038] sd 6:0:0:0: [sdb] 703282608 512-byte logical blocks: (360 GB/335 GiB) [ 4.808811] usb-storage: device found at 8 [ 4.808813] usb-storage: waiting for device to settle before scanning [ 4.811031] sd 6:0:0:0: [sdb] Write Protect is off [ 4.811033] sd 6:0:0:0: [sdb] Mode Sense: 38 00 00 00 [ 4.811035] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 4.823413] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 4.823418] usb-storage: device scan complete [ 4.828096] sdb: [ 4.885285] usb 1-1.4.4: new high speed USB device using ehci_hcd and address 9 [ 4.992678] scsi 7:0:0:0: Direct-Access WD 5000AAJ External 1.06 PQ: 0 ANSI: 0 [ 4.998049] sd 7:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 5.003418] sd 7:0:0:0: [sdc] Write Protect is off [ 5.003511] usb-storage: device scan complete [ 5.007951] sd 7:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 5.007953] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 5.014042] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 5.018485] sdc: sdc1 [ 5.024792] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 5.029191] sd 7:0:0:0: [sdc] Attached SCSI disk [ 5.054920] usb 1-1.4.4: New USB device found, idVendor=0402, idProduct=5621 [ 5.059345] usb 1-1.4.4: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 5.063785] usb 1-1.4.4: Product: USB 2.0 Storage Device [ 5.068219] usb 1-1.4.4: SerialNumber: 00042222200000014305 [ 5.072734] usb 1-1.4.4: configuration #1 chosen from 1 choice [ 5.077375] scsi10 : SCSI emulation for USB Mass Storage devices [ 5.081817] usb-storage: device found at 9 [ 5.081819] usb-storage: waiting for device to settle before scanning [ 5.597221] scsi 8:0:0:0: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0 [ 5.602715] scsi 8:0:0:1: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0 [ 5.608460] scsi 8:0:0:2: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0 [ 5.613334] sd 8:0:0:0: [sdd] Attached SCSI removable disk [ 5.619714] scsi 8:0:0:3: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0 [ 5.624586] sd 8:0:0:1: [sde] Attached SCSI removable disk [ 5.630229] sd 8:0:0:2: [sdf] Attached SCSI removable disk [ 5.635210] sd 8:0:0:3: [sdg] Attached SCSI removable disk [ 5.639555] usb-storage: device scan complete [ 5.809608] scsi 9:0:0:0: Direct-Access HP Photosmart C3180 1.00 PQ: 0 ANSI: 2 [ 5.815598] sd 9:0:0:0: [sdh] Attached SCSI removable disk [ 5.820127] usb-storage: device scan complete [ 6.082126] scsi 10:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-W162C TS09 PQ: 0 ANSI: 0 [ 6.086964] usb-storage: device scan complete [ 7.359583] udevd version 128 started [ 7.680486] sdb1 [ 7.688356] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 7.692923] sd 6:0:0:0: [sdb] Attached SCSI disk [ 7.765648] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 7.770256] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 7.770286] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 7.770315] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 7.770342] sd 8:0:0:0: Attached scsi generic sg4 type 0 [ 7.770368] sd 8:0:0:1: Attached scsi generic sg5 type 0 [ 7.770394] sd 8:0:0:2: Attached scsi generic sg6 type 0 [ 7.770421] sd 8:0:0:3: Attached scsi generic sg7 type 0 [ 7.770448] sd 9:0:0:0: Attached scsi generic sg8 type 0 [ 7.770477] scsi 10:0:0:0: Attached scsi generic sg9 type 5 [ 7.851051] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 7.855190] Uniform CD-ROM driver Revision: 3.20 [ 7.859341] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 7.883237] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 7.887551] sr 10:0:0:0: Attached scsi CD-ROM sr1 [ 7.893133] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 7.918519] ACPI: SSDT 00000000b5f1ac20 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 7.923372] iTCO_vendor_support: vendor-support=0 [ 7.927782] ACPI: SSDT 00000000b5f18620 00594 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 7.934205] ACPI Warning: Invalid throttling state, reset 20090521 processor_throttling-843 [ 7.939510] Monitor-Mwait will be used to enter C-1 state [ 8.023521] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 8.028224] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460) [ 8.032886] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 8.045859] Monitor-Mwait will be used to enter C-2 state [ 8.045893] Monitor-Mwait will be used to enter C-3 state [ 8.045901] Marking TSC unstable due to TSC halts in idle [ 8.050571] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 8.055292] processor LNXCPU:00: registered as cooling_device0 [ 8.059868] ACPI: Processor [CPU0] (supports 8 throttling states) [ 8.064575] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 8.069655] ACPI: Power Button [PWRF] [ 8.075467] ACPI: SSDT 00000000b5f19ca0 001CF (v01 PmRef ApIst 00003000 INTL 20061109) [ 8.081211] ACPI: SSDT 00000000b5f19f20 0008D (v01 PmRef ApCst 00003000 INTL 20061109) [ 8.086826] ACPI Warning: Invalid throttling state, reset 20090521 processor_throttling-843 [ 8.092386] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 8.097155] processor LNXCPU:01: registered as cooling_device1 [ 8.102059] ACPI: Processor [CPU1] (supports 8 throttling states) [ 8.113206] ACPI: AC Adapter [ACAD] (on-line) [ 8.118024] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5 [ 8.123149] ACPI: Power Button [PWRB] [ 8.128296] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6 [ 8.133536] ACPI: Lid Switch [LID] [ 8.295145] sky2 driver version 1.23 [ 8.300025] sky2 0000:07:00.0: enabling device (0000 -> 0003) [ 8.304907] sky2 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.309672] sky2 0000:07:00.0: setting latency timer to 64 [ 8.309720] sky2 0000:07:00.0: unsupported chip type 0xff [ 8.314397] sky2 0000:07:00.0: PCI INT A disabled [ 8.319050] sky2: probe of 0000:07:00.0 failed with error -95 [ 8.345870] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset [ 8.351550] agpgart-intel 0000:00:00.0: detected 131068K stolen memory [ 8.358497] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 8.366829] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 8.372061] ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI region SMBI [0x1c00-0x1c0f] [ 8.377359] ACPI: Device needs an ACPI driver [ 8.382873] i801_smbus: probe of 0000:00:1f.3 failed with error -16 [ 8.434266] cfg80211: Calling CRDA to update world regulatory domain [ 8.478588] usblp0: USB Bidirectional printer dev 8 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5611 [ 8.484326] usbcore: registered new interface driver usblp [ 8.500037] Clocksource tsc unstable (delta = -77775007 ns) [ 8.784303] cfg80211: World regulatory domain updated: [ 8.789823] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.795322] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.000366] thermal LNXTHERM:01: registered as thermal_zone0 [ 9.005878] ACPI: Thermal Zone [THRM] (64 C) [ 9.824459] ACPI: Battery Slot [BAT1] (battery present) [ 9.829956] ACPI: WMI: Mapper loaded [ 9.928091] ohci1394 0000:0a:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.935834] Linux video capture interface: v2.00 [ 9.957340] sdhci: Secure Digital Host Controller Interface driver [ 9.962871] sdhci: Copyright(c) Pierre Ossman [ 9.976166] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008) [ 9.985071] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input7 [ 9.990712] usbcore: registered new interface driver uvcvideo [ 9.996138] USB Video Class driver (v0.1.0) [ 10.002656] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[ff501000-ff5017ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 10.018831] sdhci-pci 0000:0a:01.2: SDHCI controller found [1217:7120] (rev 2) [ 10.024679] sdhci-pci 0000:0a:01.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 10.030607] mmc0: Unknown controller version (2). You may experience problems. [ 10.036549] Registered led device: mmc0:: [ 10.042365] mmc0: SDHCI controller on PCI [0000:0a:01.2] using DMA [ 10.195751] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds [ 10.201482] iwlagn: Copyright(c) 2003-2009 Intel Corporation [ 10.207240] iwlagn 0000:08:00.0: enabling device (0000 -> 0002) [ 10.212776] iwlagn 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 10.218226] iwlagn 0000:08:00.0: setting latency timer to 64 [ 10.218276] iwlagn 0000:08:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0xFDFFFFFF [ 10.375477] iwlagn 0000:08:00.0: Failed, HW not ready [ 10.381217] iwlagn 0000:08:00.0: PCI INT A disabled [ 10.390310] alloc irq_desc for 22 on node 0 [ 10.390313] alloc kstat_irqs on node 0 [ 10.390322] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 10.396039] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 10.525462] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 10.531287] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 10.536920] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 10.678554] phy1: Selected rate control algorithm 'minstrel' [ 10.679034] Registered led device: rt73usb-phy1::radio [ 10.684732] Registered led device: rt73usb-phy1::assoc [ 10.690496] Registered led device: rt73usb-phy1::quality [ 10.696491] usbcore: registered new interface driver rt73usb [ 10.704179] wlan0 renamed to wlan1 by udevd [1695] [ 10.710116] udev: renamed network interface wlan0 to wlan1 [ 11.289448] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001b240001542c7b] [ 11.496270] Adding 4200956k swap on /dev/sda1. Priority:-1 extents:1 across:4200956k [ 12.600376] device-mapper: uevent: version 1.0.3 [ 12.605846] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 12.986411] loop: module loaded [ 13.433601] fuse init (API version 7.12) [ 16.221086] type=1505 audit(1250273395.742:2): operation="profile_load" pid=2058 name=/bin/ping [ 16.243573] type=1505 audit(1250273395.761:3): operation="profile_load" pid=2059 name=/sbin/klogd [ 16.284620] type=1505 audit(1250273395.805:4): operation="profile_load" pid=2060 name=/sbin/syslog-ng [ 16.329822] type=1505 audit(1250273395.850:5): operation="profile_load" pid=2061 name=/sbin/syslogd [ 16.394165] type=1505 audit(1250273395.914:6): operation="profile_load" pid=2078 name=/usr/sbin/avahi-daemon [ 16.478233] type=1505 audit(1250273395.998:7): operation="profile_load" pid=2097 name=/usr/sbin/identd [ 16.557940] type=1505 audit(1250273396.077:8): operation="profile_load" pid=2098 name=/usr/sbin/mdnsd [ 16.604080] type=1505 audit(1250273396.125:9): operation="profile_load" pid=2100 name=/usr/sbin/nscd [ 16.667989] type=1505 audit(1250273396.185:10): operation="profile_load" pid=2103 name=/usr/sbin/ntpd [ 16.707278] type=1505 audit(1250273396.225:11): operation="profile_load" pid=2108 name=/usr/sbin/traceroute [ 33.553050] [drm] Initialized drm 1.1.0 20060810 [ 33.848887] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 33.848900] pci 0000:00:02.0: setting latency timer to 64 [ 33.870743] alloc irq_desc for 28 on node 0 [ 33.870746] alloc kstat_irqs on node 0 [ 33.870756] pci 0000:00:02.0: irq 28 for MSI/MSI-X [ 34.112329] acpi device:05: registered as cooling_device2 [ 34.112893] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input11 [ 34.113023] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 34.113105] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 36.696351] Bluetooth: Core ver 2.15 [ 36.696523] NET: Registered protocol family 31 [ 36.696529] Bluetooth: HCI device and connection manager initialized [ 36.696536] Bluetooth: HCI socket layer initialized [ 37.269452] Bluetooth: L2CAP ver 2.13 [ 37.269459] Bluetooth: L2CAP socket layer initialized [ 37.348557] Bluetooth: RFCOMM TTY layer initialized [ 37.348574] Bluetooth: RFCOMM socket layer initialized [ 37.348579] Bluetooth: RFCOMM ver 1.11 [ 38.200624] Bluetooth: SCO (Voice Link) ver 0.6 [ 38.200632] Bluetooth: SCO socket layer initialized [ 38.953181] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 38.953189] Bluetooth: BNEP filters: protocol multicast [ 39.442504] Bridge firewalling registered [ 47.466590] rt73usb 2-1:1.0: firmware: requesting rt73.bin [ 48.672642] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 48.976492] NET: Registered protocol family 17 [ 49.886651] bootsplash: status on console 0 changed to on [ 3905.683606] [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0