[ 0.000000] Linux version 2.6.30.4-15-desktop (root@flash) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP PREEMPT Fri Aug 14 16:13:45 WEST 2009 [ 0.000000] Command line: root=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part2 repair=1 resume=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part1 splash=silent elevator=cfq vga=0x317 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000b5aa1000 (usable) [ 0.000000] BIOS-e820: 00000000b5aa1000 - 00000000b5aa7000 (reserved) [ 0.000000] BIOS-e820: 00000000b5aa7000 - 00000000b5bba000 (usable) [ 0.000000] BIOS-e820: 00000000b5bba000 - 00000000b5c0f000 (reserved) [ 0.000000] BIOS-e820: 00000000b5c0f000 - 00000000b5d08000 (usable) [ 0.000000] BIOS-e820: 00000000b5d08000 - 00000000b5f0f000 (reserved) [ 0.000000] BIOS-e820: 00000000b5f0f000 - 00000000b5f18000 (usable) [ 0.000000] BIOS-e820: 00000000b5f18000 - 00000000b5f1f000 (reserved) [ 0.000000] BIOS-e820: 00000000b5f1f000 - 00000000b5f65000 (usable) [ 0.000000] BIOS-e820: 00000000b5f65000 - 00000000b5f9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000b5f9f000 - 00000000b5fe1000 (usable) [ 0.000000] BIOS-e820: 00000000b5fe1000 - 00000000b5fff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000b5fff000 - 00000000b6000000 (usable) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x100000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 100000000 mask FC0000000 write-back [ 0.000000] 3 base 0B8000000 mask FF8000000 uncachable [ 0.000000] 4 base 0B7E00000 mask FFFE00000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000b7e00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xb6000 max_arch_pfn = 0x100000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f400 (usable) [ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000b5aa1000 (usable) [ 0.000000] modified: 00000000b5aa1000 - 00000000b5aa7000 (reserved) [ 0.000000] modified: 00000000b5aa7000 - 00000000b5bba000 (usable) [ 0.000000] modified: 00000000b5bba000 - 00000000b5c0f000 (reserved) [ 0.000000] modified: 00000000b5c0f000 - 00000000b5d08000 (usable) [ 0.000000] modified: 00000000b5d08000 - 00000000b5f0f000 (reserved) [ 0.000000] modified: 00000000b5f0f000 - 00000000b5f18000 (usable) [ 0.000000] modified: 00000000b5f18000 - 00000000b5f1f000 (reserved) [ 0.000000] modified: 00000000b5f1f000 - 00000000b5f65000 (usable) [ 0.000000] modified: 00000000b5f65000 - 00000000b5f9f000 (ACPI NVS) [ 0.000000] modified: 00000000b5f9f000 - 00000000b5fe1000 (usable) [ 0.000000] modified: 00000000b5fe1000 - 00000000b5fff000 (ACPI data) [ 0.000000] modified: 00000000b5fff000 - 00000000b6000000 (usable) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] init_memory_mapping: 0000000000000000-00000000b6000000 [ 0.000000] 0000000000 - 00b6000000 page 2M [ 0.000000] kernel direct mapping tables up to b6000000 @ 8000-c000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000 [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ a000-10000 [ 0.000000] RAMDISK: 37a6a000 - 37fefd98 [ 0.000000] ACPI: RSDP 00000000000f6e60 00024 (v02 TOSQCI) [ 0.000000] ACPI: XSDT 00000000b5ff4a00 0007C (v01 TOSQCI TOSQCI00 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 00000000b5fe5000 000F4 (v03 T0SQCI TOSQCI00 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT 00000000b5fe6000 09F7C (v02 TOSQCI CANTIGA 06040000 INTL 20061109) [ 0.000000] ACPI: FACS 00000000b5f9efc0 00040 [ 0.000000] ACPI: APIC 00000000b5ffed1e 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: HPET 00000000b5ffed86 00038 (v01 TOSQCI TOSQCI00 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 00000000b5ffedbe 0003C (v01 TOSQCI TOSQCI00 06040000 LOHR 0000005A) [ 0.000000] ACPI: APIC 00000000b5ffedfa 00068 (v01 PTLTD APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000b5ffee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC 00000000b5ffee8a 00176 (v01 TOSQCI TOSQCI00 06040000 LTP 00000000) [ 0.000000] ACPI: SSDT 00000000b5ff4aa4 00196 (v01 SataRe SataAhci 00001000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000b5fe4000 00655 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000b5fe3000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000b5fe2000 0020F (v01 PmRef ApTst 00003000 INTL 20061109) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [000000000000b000 - 0000000000022fff] [ 0.000000] bootmap [0000000000023000 - 000000000004afff] pages 28 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 0000c06870] TEXT DATA BSS ==> [0000200000 - 0000c06870] [ 0.000000] #3 [0037a6a000 - 0037fefd98] RAMDISK ==> [0037a6a000 - 0037fefd98] [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] [ 0.000000] #5 [0000c07000 - 0000c071e4] BRK ==> [0000c07000 - 0000c071e4] [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000] [ 0.000000] found SMP MP-table at [ffff8800000f6f20] f6f20 [ 0.000000] [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002b9fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[10] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000b5aa1 [ 0.000000] 0: 0x000b5aa7 -> 0x000b5bba [ 0.000000] 0: 0x000b5c0f -> 0x000b5d08 [ 0.000000] 0: 0x000b5f0f -> 0x000b5f18 [ 0.000000] 0: 0x000b5f1f -> 0x000b5f65 [ 0.000000] 0: 0x000b5f9f -> 0x000b5fe1 [ 0.000000] 0: 0x000b5fff -> 0x000b6000 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1006809 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 2668 pages reserved [ 0.000000] DMA zone: 1270 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 726391 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000b5aa1000 - 00000000b5aa7000 [ 0.000000] PM: Registered nosave memory: 00000000b5bba000 - 00000000b5c0f000 [ 0.000000] PM: Registered nosave memory: 00000000b5d08000 - 00000000b5f0f000 [ 0.000000] PM: Registered nosave memory: 00000000b5f18000 - 00000000b5f1f000 [ 0.000000] PM: Registered nosave memory: 00000000b5f65000 - 00000000b5f9f000 [ 0.000000] PM: Registered nosave memory: 00000000b5fe1000 - 00000000b5fff000 [ 0.000000] PM: Registered nosave memory: 00000000b6000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at b8000000 (gap: b6000000:4a000000) [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 25 pages at ffff880028023000, static data 72544 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 986221 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part2 repair=1 resume=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part1 splash=silent elevator=cfq vga=0x317 [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Experimental hierarchical RCU implementation. [ 0.000000] Experimental hierarchical RCU init done. [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2527.285 MHz processor. [ 0.000999] Console: colour dummy device 80x25 [ 0.000999] console [tty0] enabled [ 0.000999] Checking aperture... [ 0.000999] No AGP bridge found [ 0.000999] Calgary: detecting Calgary via BIOS EBDA area [ 0.000999] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000999] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000999] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000999] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000999] Memory: 3887480k/5242880k available (5000k kernel code, 1215644k absent, 139756k reserved, 2428k data, 1580k init) [ 0.000999] hpet clockevent registered [ 0.000999] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5054.57 BogoMIPS (lpj=2527285) [ 0.000999] Security Framework initialized [ 0.000999] SELinux: Disabled at boot. [ 0.000999] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.002581] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.003583] Mount-cache hash table entries: 256 [ 0.003770] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.003775] CPU: L2 cache: 3072K [ 0.003779] CPU 0/0x0 -> Node 0 [ 0.003782] CPU: Physical Processor ID: 0 [ 0.003785] CPU: Processor Core ID: 0 [ 0.003794] CPU0: Thermal monitoring enabled (TM2) [ 0.003800] using mwait in idle threads. [ 0.004658] ACPI: Core revision 20090320 [ 0.020064] Setting APIC routing to flat [ 0.020409] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.030788] CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a [ 0.030995] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.000999] Initializing CPU#1 [ 0.000999] Calibrating delay using timer specific routine.. 5053.73 BogoMIPS (lpj=2526869) [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 3072K [ 0.000999] CPU 1/0x1 -> Node 0 [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 1 [ 0.000999] CPU1: Thermal monitoring enabled (TM2) [ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.102562] CPU1: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a [ 0.102603] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.103003] Brought up 2 CPUs [ 0.103009] Total of 2 processors activated (10108.30 BogoMIPS). [ 0.103076] CPU0 attaching sched-domain: [ 0.103079] domain 0: span 0-1 level MC [ 0.103081] groups: 0 1 [ 0.103086] CPU1 attaching sched-domain: [ 0.103088] domain 0: span 0-1 level MC [ 0.103090] groups: 1 0 [ 0.103154] net_namespace: 1888 bytes [ 0.103154] Booting paravirtualized kernel on bare hardware [ 0.104097] regulator: core version 0.5 [ 0.104097] Time: 19:06:56 Date: 08/14/09 [ 0.104097] NET: Registered protocol family 16 [ 0.104218] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.104224] ACPI: bus type pci registered [ 0.104293] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.104298] PCI: Not using MMCONFIG. [ 0.104301] PCI: Using configuration type 1 for base access [ 0.105052] bio: create slab at 0 [ 0.106647] ACPI: EC: Look up EC in DSDT [ 0.112835] ACPI: BIOS _OSI(Linux) query ignored [ 0.114218] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.620003] ACPI: EC: missing confirmations, switch off interrupt mode. [ 0.781142] ACPI: Interpreter enabled [ 0.781147] ACPI: (supports S0 S3 S4 S5) [ 0.781172] ACPI: Using IOAPIC for interrupt routing [ 0.781240] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.784597] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.795143] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.802807] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 0.802812] ACPI: EC: driver started in poll mode [ 0.803280] ACPI: No dock devices found. [ 0.803379] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.803476] pci 0000:00:02.0: reg 10 64bit mmio: [0xf4000000-0xf43fffff] [ 0.803482] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] [ 0.803487] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] [ 0.803521] pci 0000:00:02.1: reg 10 64bit mmio: [0xf4400000-0xf44fffff] [ 0.803641] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f] [ 0.803732] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f] [ 0.803823] pci 0000:00:1a.2: reg 20 io port: [0x1860-0x187f] [ 0.803917] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf4a04800-0xf4a04bff] [ 0.803984] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.803992] pci 0000:00:1a.7: PME# disabled [ 0.804051] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf4800000-0xf4803fff] [ 0.804110] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.804117] pci 0000:00:1b.0: PME# disabled [ 0.804202] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.804209] pci 0000:00:1c.0: PME# disabled [ 0.804299] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.804306] pci 0000:00:1c.4: PME# disabled [ 0.804395] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.804401] pci 0000:00:1c.5: PME# disabled [ 0.804477] pci 0000:00:1d.0: reg 20 io port: [0x1880-0x189f] [ 0.804569] pci 0000:00:1d.1: reg 20 io port: [0x18a0-0x18bf] [ 0.804659] pci 0000:00:1d.2: reg 20 io port: [0x18c0-0x18df] [ 0.804752] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf4a04c00-0xf4a04fff] [ 0.804820] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.804827] pci 0000:00:1d.7: PME# disabled [ 0.805081] pci 0000:00:1f.2: reg 10 io port: [0x1818-0x181f] [ 0.805088] pci 0000:00:1f.2: reg 14 io port: [0x180c-0x180f] [ 0.805095] pci 0000:00:1f.2: reg 18 io port: [0x1810-0x1817] [ 0.805102] pci 0000:00:1f.2: reg 1c io port: [0x1808-0x180b] [ 0.805110] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff] [ 0.805117] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf4a04000-0xf4a047ff] [ 0.805163] pci 0000:00:1f.2: PME# supported from D3hot [ 0.805170] pci 0000:00:1f.2: PME# disabled [ 0.805213] pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff] [ 0.805231] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f] [ 0.805317] pci 0000:00:1c.0: bridge io port: [0x00-0xfff] [ 0.805321] pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff] [ 0.805328] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x000000-0x0fffff] [ 0.805400] pci 0000:07:00.0: reg 10 64bit mmio: [0x000000-0x003fff] [ 0.805410] pci 0000:07:00.0: reg 18 io port: [0x00-0xff] [ 0.805490] pci 0000:07:00.0: supports D1 D2 [ 0.805492] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.805500] pci 0000:07:00.0: PME# disabled [ 0.805579] pci 0000:00:1c.4: bridge io port: [0x00-0xfff] [ 0.805583] pci 0000:00:1c.4: bridge 32bit mmio: [0x000000-0x0fffff] [ 0.805591] pci 0000:00:1c.4: bridge 64bit mmio pref: [0x000000-0x0fffff] [ 0.805680] pci 0000:08:00.0: reg 10 64bit mmio: [0x000000-0x001fff] [ 0.805794] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.805804] pci 0000:08:00.0: PME# disabled [ 0.805887] pci 0000:00:1c.5: bridge io port: [0x00-0xfff] [ 0.805892] pci 0000:00:1c.5: bridge 32bit mmio: [0x000000-0x0fffff] [ 0.805899] pci 0000:00:1c.5: bridge 64bit mmio pref: [0x000000-0x0fffff] [ 0.805942] pci 0000:0a:01.0: reg 10 32bit mmio: [0xff501000-0xff501fff] [ 0.805949] pci 0000:0a:01.0: reg 14 32bit mmio: [0xf4700000-0xf47007ff] [ 0.806002] pci 0000:0a:01.0: supports D1 D2 [ 0.806004] pci 0000:0a:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.806011] pci 0000:0a:01.0: PME# disabled [ 0.806061] pci 0000:0a:01.2: reg 10 32bit mmio: [0xf4700800-0xf47008ff] [ 0.806127] pci 0000:0a:01.2: supports D1 D2 [ 0.806128] pci 0000:0a:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.806136] pci 0000:0a:01.2: PME# disabled [ 0.806184] pci 0000:0a:01.3: reg 10 32bit mmio: [0xf4702000-0xf4702fff] [ 0.806249] pci 0000:0a:01.3: supports D1 D2 [ 0.806251] pci 0000:0a:01.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.806259] pci 0000:0a:01.3: PME# disabled [ 0.806326] pci 0000:00:1e.0: transparent bridge [ 0.806335] pci 0000:00:1e.0: bridge 32bit mmio: [0xf4700000-0xf47fffff] [ 0.806372] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.806538] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.806640] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.806727] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.824805] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.824960] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 0.825119] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 *6 7 10 12 14 15) [ 0.825270] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.825422] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.825575] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.825727] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.825878] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15) [ 0.826082] SCSI subsystem initialized [ 0.826109] libata version 3.00 loaded. [ 0.826109] usbcore: registered new interface driver usbfs [ 0.826109] usbcore: registered new interface driver hub [ 0.826109] usbcore: registered new device driver usb [ 0.826109] PCI: Using ACPI for IRQ routing [ 0.826109] pci 0000:00:1c.0: BAR 13: can't allocate resource [ 0.826109] pci 0000:00:1c.0: BAR 14: can't allocate resource [ 0.826109] pci 0000:00:1c.0: BAR 15: can't allocate resource [ 0.826109] pci 0000:00:1c.4: BAR 13: can't allocate resource [ 0.826109] pci 0000:00:1c.4: BAR 14: can't allocate resource [ 0.826109] pci 0000:00:1c.4: BAR 15: can't allocate resource [ 0.826109] pci 0000:00:1c.5: BAR 13: can't allocate resource [ 0.826109] pci 0000:00:1c.5: BAR 14: can't allocate resource [ 0.826109] pci 0000:00:1c.5: BAR 15: can't allocate resource [ 0.829029] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.829037] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.833008] Switched to high resolution mode on CPU 0 [ 0.833644] Switched to high resolution mode on CPU 1 [ 0.835007] pnp: PnP ACPI init [ 0.835016] ACPI: bus type pnp registered [ 0.836324] pnp 00:04: io resource (0x2e-0x2f) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 0.836330] pnp 00:04: io resource (0x4e-0x4f) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 0.836336] pnp 00:04: io resource (0x61-0x61) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 0.836342] pnp 00:04: io resource (0x63-0x63) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 0.836347] pnp 00:04: io resource (0x65-0x65) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 0.836353] pnp 00:04: io resource (0x67-0x67) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 0.836359] pnp 00:04: io resource (0x68-0x68) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 0.836364] pnp 00:04: io resource (0x6c-0x6c) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 0.836370] pnp 00:04: io resource (0x70-0x70) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 0.836375] pnp 00:04: io resource (0x80-0x80) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 0.836381] pnp 00:04: io resource (0x92-0x92) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 0.836386] pnp 00:04: io resource (0xb2-0xb3) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 0.838090] pnp: PnP ACPI: found 9 devices [ 0.838095] ACPI: ACPI bus type pnp unregistered [ 0.838105] system 00:02: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.838114] system 00:04: ioport range 0x3e0-0x3e1 has been reserved [ 0.838119] system 00:04: ioport range 0x400-0x47f has been reserved [ 0.838123] system 00:04: ioport range 0x680-0x69f has been reserved [ 0.838127] system 00:04: ioport range 0x480-0x48f has been reserved [ 0.838132] system 00:04: ioport range 0xffff-0xffff has been reserved [ 0.838137] system 00:04: ioport range 0xffff-0xffff has been reserved [ 0.838141] system 00:04: ioport range 0x1180-0x11ff has been reserved [ 0.838146] system 00:04: ioport range 0x164e-0x164f has been reserved [ 0.838150] system 00:04: ioport range 0xfe00-0xfe00 has been reserved [ 0.838158] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.838165] system 00:08: iomem range 0xfed10000-0xfed13fff has been reserved [ 0.838169] system 00:08: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.838174] system 00:08: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.838179] system 00:08: iomem range 0xe0000000-0xefffffff has been reserved [ 0.838184] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.838188] system 00:08: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.842931] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.842935] pci 0000:00:1c.0: IO window: disabled [ 0.842942] pci 0000:00:1c.0: MEM window: disabled [ 0.842948] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.842970] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07 [ 0.842975] pci 0000:00:1c.4: IO window: 0x2000-0x2fff [ 0.842983] pci 0000:00:1c.4: MEM window: 0xb8000000-0xb80fffff [ 0.842989] pci 0000:00:1c.4: PREFETCH window: disabled [ 0.843012] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08 [ 0.843016] pci 0000:00:1c.5: IO window: disabled [ 0.843023] pci 0000:00:1c.5: MEM window: 0xb8100000-0xb81fffff [ 0.843029] pci 0000:00:1c.5: PREFETCH window: disabled [ 0.843038] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a [ 0.843042] pci 0000:00:1e.0: IO window: disabled [ 0.843049] pci 0000:00:1e.0: MEM window: 0xf4700000-0xf47fffff [ 0.843055] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.843071] alloc irq_desc for 17 on cpu 0 node 0 [ 0.843073] alloc kstat_irqs on cpu 0 node 0 [ 0.843078] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.843087] pci 0000:00:1c.0: setting latency timer to 64 [ 0.843094] pci 0000:00:1c.4: enabling device (0000 -> 0003) [ 0.843100] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.843107] pci 0000:00:1c.4: setting latency timer to 64 [ 0.843115] pci 0000:00:1c.5: enabling device (0000 -> 0002) [ 0.843120] alloc irq_desc for 16 on cpu 0 node 0 [ 0.843122] alloc kstat_irqs on cpu 0 node 0 [ 0.843125] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.843133] pci 0000:00:1c.5: setting latency timer to 64 [ 0.843141] pci 0000:00:1e.0: setting latency timer to 64 [ 0.843145] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.843147] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.843149] pci_bus 0000:02: resource 0 mem: [0x0-0xfff] [ 0.843151] pci_bus 0000:02: resource 1 mem: [0x0-0xfffff] [ 0.843153] pci_bus 0000:02: resource 2 mem: [0x0-0xfffff] [ 0.843155] pci_bus 0000:07: resource 0 io: [0x2000-0x2fff] [ 0.843157] pci_bus 0000:07: resource 1 mem: [0xb8000000-0xb80fffff] [ 0.843159] pci_bus 0000:07: resource 2 mem: [0x0-0xfffff] [ 0.843162] pci_bus 0000:08: resource 0 mem: [0x0-0xfff] [ 0.843164] pci_bus 0000:08: resource 1 mem: [0xb8100000-0xb81fffff] [ 0.843166] pci_bus 0000:08: resource 2 mem: [0x0-0xfffff] [ 0.843168] pci_bus 0000:0a: resource 1 mem: [0xf4700000-0xf47fffff] [ 0.843170] pci_bus 0000:0a: resource 3 io: [0x00-0xffff] [ 0.843172] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.843227] NET: Registered protocol family 2 [ 0.850146] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.851291] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.854937] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.855432] TCP: Hash tables configured (established 524288 bind 65536) [ 0.855437] TCP reno registered [ 0.858112] NET: Registered protocol family 1 [ 0.858178] Unpacking initramfs... [ 0.947595] Freeing initrd memory: 5655k freed [ 0.949764] Simple Boot Flag at 0x36 set to 0x1 [ 0.950030] Scanning for low memory corruption every 60 seconds [ 0.950217] audit: initializing netlink socket (disabled) [ 0.950237] type=2000 audit(1250276816.950:1): initialized [ 0.952888] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.953008] VFS: Disk quotas dquot_6.5.2 [ 0.953045] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.953178] msgmni has been set to 7603 [ 0.953391] alg: No test for stdrng (krng) [ 0.953423] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.953429] io scheduler noop registered [ 0.953432] io scheduler anticipatory registered [ 0.953435] io scheduler deadline registered [ 0.953454] io scheduler cfq registered (default) [ 0.953513] pci 0000:00:02.0: Boot video device [ 0.953817] alloc irq_desc for 24 on cpu 0 node 0 [ 0.953820] alloc kstat_irqs on cpu 0 node 0 [ 0.953833] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.953851] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.954027] alloc irq_desc for 25 on cpu 0 node 0 [ 0.954029] alloc kstat_irqs on cpu 0 node 0 [ 0.954038] pcieport-driver 0000:00:1c.4: irq 25 for MSI/MSI-X [ 0.954055] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 0.954229] alloc irq_desc for 26 on cpu 0 node 0 [ 0.954231] alloc kstat_irqs on cpu 0 node 0 [ 0.954239] pcieport-driver 0000:00:1c.5: irq 26 for MSI/MSI-X [ 0.954256] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 0.954527] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20011100000, using 3072k, total 131008k [ 0.954534] vesafb: mode is 1024x768x16, linelength=2048, pages=84 [ 0.954537] vesafb: scrolling: redraw [ 0.954541] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.966712] Console: switching to colour frame buffer device 128x48 [ 0.978863] fb0: VESA VGA frame buffer device [ 0.980115] Non-volatile memory driver v1.3 [ 0.980213] Linux agpgart interface v0.103 [ 0.980308] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.980801] Driver 'sd' needs updating - please use bus_type methods [ 0.980989] ahci 0000:00:1f.2: version 3.0 [ 0.981007] alloc irq_desc for 19 on cpu 0 node 0 [ 0.981009] alloc kstat_irqs on cpu 0 node 0 [ 0.981014] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.981204] alloc irq_desc for 27 on cpu 0 node 0 [ 0.981205] alloc kstat_irqs on cpu 0 node 0 [ 0.981215] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X [ 0.981300] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 0.981489] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ems [ 0.981660] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.984829] scsi0 : ahci [ 0.984970] scsi1 : ahci [ 0.985079] scsi2 : ahci [ 0.985181] scsi3 : ahci [ 0.985286] scsi4 : ahci [ 0.985389] scsi5 : ahci [ 0.985587] ata1: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04100 irq 27 [ 0.985759] ata2: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04180 irq 27 [ 0.985929] ata3: DUMMY [ 0.985986] ata4: DUMMY [ 0.986048] ata5: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04300 irq 27 [ 0.986219] ata6: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04380 irq 27 [ 0.986471] Fixed MDIO Bus: probed [ 0.986555] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.986747] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 0.988875] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.988878] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.991064] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.997257] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.999570] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.999582] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf4a04800 [ 1.011006] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.013470] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.016065] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.018756] usb usb1: Product: EHCI Host Controller [ 1.021507] usb usb1: Manufacturer: Linux 2.6.30.4-15-desktop ehci_hcd [ 1.024395] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.027372] usb usb1: configuration #1 chosen from 1 choice [ 1.030429] hub 1-0:1.0: USB hub found [ 1.033518] hub 1-0:1.0: 6 ports detected [ 1.036760] alloc irq_desc for 23 on cpu 0 node 0 [ 1.036762] alloc kstat_irqs on cpu 0 node 0 [ 1.036767] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.040088] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.040092] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.043459] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.050838] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.054352] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.054365] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4a04c00 [ 1.067008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.070670] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.074459] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.078345] usb usb2: Product: EHCI Host Controller [ 1.082291] usb usb2: Manufacturer: Linux 2.6.30.4-15-desktop ehci_hcd [ 1.086375] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.090426] usb usb2: configuration #1 chosen from 1 choice [ 1.094453] hub 2-0:1.0: USB hub found [ 1.098443] hub 2-0:1.0: 6 ports detected [ 1.102483] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.106502] uhci_hcd: USB Universal Host Controller Interface driver [ 1.110542] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.114557] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.114560] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.118510] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.122498] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 [ 1.126419] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.130451] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.134575] usb usb3: Product: UHCI Host Controller [ 1.138775] usb usb3: Manufacturer: Linux 2.6.30.4-15-desktop uhci_hcd [ 1.143075] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.147446] usb usb3: configuration #1 chosen from 1 choice [ 1.151780] hub 3-0:1.0: USB hub found [ 1.156142] hub 3-0:1.0: 2 ports detected [ 1.160510] alloc irq_desc for 21 on cpu 0 node 0 [ 1.160512] alloc kstat_irqs on cpu 0 node 0 [ 1.160516] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.164982] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.164985] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.169384] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.173918] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 [ 1.178377] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.182848] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.187303] usb usb4: Product: UHCI Host Controller [ 1.191735] usb usb4: Manufacturer: Linux 2.6.30.4-15-desktop uhci_hcd [ 1.196218] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.200700] usb usb4: configuration #1 chosen from 1 choice [ 1.205247] hub 4-0:1.0: USB hub found [ 1.209734] hub 4-0:1.0: 2 ports detected [ 1.214218] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 1.218724] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 1.218727] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.223168] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.227653] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860 [ 1.232099] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.236599] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.241103] usb usb5: Product: UHCI Host Controller [ 1.245630] usb usb5: Manufacturer: Linux 2.6.30.4-15-desktop uhci_hcd [ 1.250172] usb usb5: SerialNumber: 0000:00:1a.2 [ 1.254717] usb usb5: configuration #1 chosen from 1 choice [ 1.259266] hub 5-0:1.0: USB hub found [ 1.263775] hub 5-0:1.0: 2 ports detected [ 1.268333] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.272944] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.272948] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.277485] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.282076] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880 [ 1.286608] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.291166] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.295727] usb usb6: Product: UHCI Host Controller [ 1.300272] usb usb6: Manufacturer: Linux 2.6.30.4-15-desktop uhci_hcd [ 1.301283] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.309541] usb usb6: SerialNumber: 0000:00:1d.0 [ 1.309783] ACPI Warning (nspredef-0943): \_SB_.PCI0.SAT0.PRT0._GTF: Return type mismatch - found Integer, expected Buffer [20090320] [ 1.309789] ata1.00: _GTF unexpected object type 0x1 [ 1.328775] usb usb6: configuration #1 chosen from 1 choice [ 1.329267] ata6: SATA link down (SStatus 0 SControl 300) [ 1.329286] ata5: SATA link down (SStatus 0 SControl 300) [ 1.329305] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.331039] ata2.00: ATAPI: MATSHITADVD-RAM UJ862AS, 1.50, max UDMA/33 [ 1.341031] ata1.00: ATA-8: TOSHIBA MK3252GSX, LV010M, max UDMA/100 [ 1.341033] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.342702] ata2.00: configured for UDMA/33 [ 1.343563] ata1.00: _GTF unexpected object type 0x1 [ 1.343960] ata1.00: configured for UDMA/100 [ 1.344068] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3252GS LV01 PQ: 0 ANSI: 5 [ 1.344199] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 1.344213] sd 0:0:0:0: [sda] Write Protect is off [ 1.344215] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.344235] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.344323] sda:<3>ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4 [ 1.390695] ata2: irq_stat 0x40000001 [ 1.390698] ata2: hard resetting link [ 1.390710] sda1 sda2 [ 1.416539] hub 6-0:1.0: USB hub found [ 1.416588] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.417267] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.431104] hub 6-0:1.0: 2 ports detected [ 1.436113] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.441103] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.441107] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.446065] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.451073] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0 [ 1.456079] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.461041] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.466015] usb usb7: Product: UHCI Host Controller [ 1.470931] usb usb7: Manufacturer: Linux 2.6.30.4-15-desktop uhci_hcd [ 1.475889] usb usb7: SerialNumber: 0000:00:1d.1 [ 1.480837] usb usb7: configuration #1 chosen from 1 choice [ 1.485791] hub 7-0:1.0: USB hub found [ 1.490689] hub 7-0:1.0: 2 ports detected [ 1.495673] alloc irq_desc for 18 on cpu 0 node 0 [ 1.495675] alloc kstat_irqs on cpu 0 node 0 [ 1.495679] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.500648] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.500651] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.505587] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.510587] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 [ 1.515540] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.520492] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.525448] usb usb8: Product: UHCI Host Controller [ 1.530359] usb usb8: Manufacturer: Linux 2.6.30.4-15-desktop uhci_hcd [ 1.535297] usb usb8: SerialNumber: 0000:00:1d.2 [ 1.540220] usb usb8: configuration #1 chosen from 1 choice [ 1.545106] hub 8-0:1.0: USB hub found [ 1.549838] hub 8-0:1.0: 2 ports detected [ 1.554458] Initializing USB Mass Storage driver... [ 1.554703] usb 1-1: New USB device found, idVendor=05e3, idProduct=0606 [ 1.554705] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.554707] usb 1-1: Product: USB2.0 Hub [ 1.554744] usb 1-1: configuration #1 chosen from 1 choice [ 1.577372] hub 1-1:1.0: USB hub found [ 1.577387] usbcore: registered new interface driver usb-storage [ 1.577389] USB Mass Storage support registered. [ 1.577420] usbcore: registered new interface driver libusual [ 1.577431] usbcore: registered new interface driver ums-alauda [ 1.577442] usbcore: registered new interface driver ums-cypress [ 1.577453] usbcore: registered new interface driver ums-datafab [ 1.577463] usbcore: registered new interface driver ums-freecom [ 1.577476] usbcore: registered new interface driver ums-isd200 [ 1.577487] usbcore: registered new interface driver ums-jumpshot [ 1.577497] usbcore: registered new interface driver ums-karma [ 1.577508] usbcore: registered new interface driver ums-onetouch [ 1.577519] usbcore: registered new interface driver ums-sddr09 [ 1.577529] usbcore: registered new interface driver ums-sddr55 [ 1.577540] usbcore: registered new interface driver ums-usbat [ 1.577582] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.645193] hub 1-1:1.0: 4 ports detected [ 1.645536] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.647860] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.647865] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.647868] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.647870] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.647872] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.647909] mice: PS/2 mouse device common for all mice [ 1.648007] rtc_cmos 00:05: RTC can wake from S4 [ 1.648043] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.648074] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.648084] cpuidle: using governor ladder [ 1.648085] cpuidle: using governor menu [ 1.648311] usbcore: registered new interface driver hiddev [ 1.648323] usbcore: registered new interface driver usbhid [ 1.648325] usbhid: v2.6:USB HID core driver [ 1.702943] TCP cubic registered [ 1.706406] NET: Registered protocol family 10 [ 1.710162] lo: Disabled Privacy Extensions [ 1.713770] lib80211: common routines for IEEE802.11 drivers [ 1.717123] lib80211_crypt: registered algorithm 'NULL' [ 1.717180] PM: Checking image partition /dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part1 [ 1.731279] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.863010] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 2.122138] usb 2-1: New USB device found, idVendor=07d1, idProduct=3c03 [ 2.125645] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.129176] usb 2-1: Product: 802.11 bg WLAN [ 2.132659] usb 2-1: Manufacturer: Ralink [ 2.136193] usb 2-1: configuration #1 chosen from 1 choice [ 2.170018] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.177253] ata2.00: configured for UDMA/33 [ 2.182304] ata2: EH complete [ 2.197757] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ862AS 1.50 PQ: 0 ANSI: 5 [ 2.201430] PM: Resume from disk failed. [ 2.201446] registered taskstats version 1 [ 2.205162] Magic number: 5:145:142 [ 2.208715] acpi device:13: hash matches [ 2.212235] rtc_cmos 00:05: setting system clock to 2009-08-14 19:06:58 UTC (1250276818) [ 2.215935] Freeing unused kernel memory: 1580k freed [ 2.220103] Write protecting the kernel read-only data: 6960k [ 2.241276] usb 2-4: new high speed USB device using ehci_hcd and address 3 [ 2.269522] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found [ 2.284283] udevd version 128 started [ 2.373113] usb 2-4: New USB device found, idVendor=04f2, idProduct=b008 [ 2.377803] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 2.382390] usb 2-4: Product: Chicony USB 2.0 Camera [ 2.386852] usb 2-4: Manufacturer: Chicony Electronics Co., Ltd. [ 2.391336] usb 2-4: SerialNumber: SN0001 [ 2.396037] usb 2-4: configuration #1 chosen from 1 choice [ 2.540835] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1e0b1, caps: 0xd04711/0xa00000 [ 2.579131] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1 [ 2.595499] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [ 2.595502] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 2.595506] PM: Marking nosave pages: 00000000b5aa1000 - 00000000b5aa7000 [ 2.595508] PM: Marking nosave pages: 00000000b5bba000 - 00000000b5c0f000 [ 2.595512] PM: Marking nosave pages: 00000000b5d08000 - 00000000b5f0f000 [ 2.595525] PM: Marking nosave pages: 00000000b5f18000 - 00000000b5f1f000 [ 2.595527] PM: Marking nosave pages: 00000000b5f65000 - 00000000b5f9f000 [ 2.595530] PM: Marking nosave pages: 00000000b5fe1000 - 00000000b5fff000 [ 2.595533] PM: Marking nosave pages: 00000000b6000000 - 0000000100000000 [ 2.596471] PM: Basic memory bitmaps created [ 2.608023] usb 3-2: new low speed USB device using uhci_hcd and address 2 [ 2.723203] PM: Basic memory bitmaps freed [ 2.730306] PM: Starting manual resume from disk [ 2.730309] PM: Resume from partition 259:0 [ 2.730310] PM: Checking hibernation image. [ 2.735672] PM: Resume from disk failed. [ 2.802232] usb 3-2: New USB device found, idVendor=046d, idProduct=c50a [ 2.808083] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.813947] usb 3-2: Product: USB Receiver [ 2.819774] usb 3-2: Manufacturer: Logitech [ 2.825550] usb 3-2: configuration #1 chosen from 1 choice [ 2.851493] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input2 [ 2.857381] generic-usb 0003:046D:C50A.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-2/input0 [ 2.931307] usb 1-1.1: new high speed USB device using ehci_hcd and address 4 [ 3.044289] usb 1-1.1: New USB device found, idVendor=059b, idProduct=0370 [ 3.050417] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 3.056529] usb 1-1.1: Product: External HD [ 3.062575] usb 1-1.1: Manufacturer: Iomega [ 3.068625] usb 1-1.1: SerialNumber: 152000000733 [ 3.074818] usb 1-1.1: configuration #1 chosen from 1 choice [ 3.082424] scsi6 : SCSI emulation for USB Mass Storage devices [ 3.088547] usb-storage: device found at 4 [ 3.088549] usb-storage: waiting for device to settle before scanning [ 3.162529] usb 1-1.2: new high speed USB device using ehci_hcd and address 5 [ 3.229160] kjournald starting. Commit interval 5 seconds [ 3.229298] EXT3 FS on sda2, internal journal [ 3.229303] EXT3-fs: mounted filesystem with ordered data mode. [ 3.261389] usb 1-1.2: New USB device found, idVendor=1058, idProduct=1001 [ 3.267660] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.274004] usb 1-1.2: Product: External HDD [ 3.280273] usb 1-1.2: Manufacturer: Western Digital [ 3.286491] usb 1-1.2: SerialNumber: 574341505732323139323037 [ 3.292805] usb 1-1.2: configuration #1 chosen from 1 choice [ 3.299445] scsi7 : SCSI emulation for USB Mass Storage devices [ 3.306171] usb-storage: device found at 5 [ 3.306173] usb-storage: waiting for device to settle before scanning [ 3.368266] usb 1-1.4: new high speed USB device using ehci_hcd and address 6 [ 3.450368] usb 1-1.4: New USB device found, idVendor=05e3, idProduct=0606 [ 3.456648] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.462933] usb 1-1.4: Product: USB2.0 Hub [ 3.469264] usb 1-1.4: configuration #1 chosen from 1 choice [ 3.475766] hub 1-1.4:1.0: USB hub found [ 3.482239] hub 1-1.4:1.0: 4 ports detected [ 3.763335] usb 1-1.4.2: new high speed USB device using ehci_hcd and address 7 [ 3.858946] usb 1-1.4.2: New USB device found, idVendor=05e3, idProduct=070e [ 3.864872] usb 1-1.4.2: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 3.870795] usb 1-1.4.2: Product: USB Storage [ 3.876529] usb 1-1.4.2: SerialNumber: 000000009601 [ 3.882216] usb 1-1.4.2: configuration #1 chosen from 1 choice [ 3.888384] scsi8 : SCSI emulation for USB Mass Storage devices [ 3.893978] usb-storage: device found at 7 [ 3.893980] usb-storage: waiting for device to settle before scanning [ 3.968315] usb 1-1.4.3: new high speed USB device using ehci_hcd and address 8 [ 4.048926] usb 1-1.4.3: New USB device found, idVendor=03f0, idProduct=5611 [ 4.054478] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.059923] usb 1-1.4.3: Product: Photosmart C3100 series [ 4.065257] usb 1-1.4.3: Manufacturer: HP [ 4.070523] usb 1-1.4.3: SerialNumber: MY68SC52KM04P9 [ 4.075826] usb 1-1.4.3: configuration #1 chosen from 1 choice [ 4.081614] scsi9 : SCSI emulation for USB Mass Storage devices [ 4.087001] usb-storage: device found at 8 [ 4.087003] usb-storage: waiting for device to settle before scanning [ 4.160291] usb 1-1.4.4: new high speed USB device using ehci_hcd and address 9 [ 4.315395] usb 1-1.4.4: New USB device found, idVendor=0402, idProduct=5621 [ 4.320496] usb 1-1.4.4: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 4.325563] usb 1-1.4.4: Product: USB 2.0 Storage Device [ 4.330583] usb 1-1.4.4: SerialNumber: 00042222200000014305 [ 4.335645] usb 1-1.4.4: configuration #1 chosen from 1 choice [ 4.340832] scsi10 : SCSI emulation for USB Mass Storage devices [ 4.346037] usb-storage: device found at 9 [ 4.346039] usb-storage: waiting for device to settle before scanning [ 6.337596] udevd version 128 started [ 7.052486] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 7.057065] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 7.251650] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset [ 7.257297] agpgart-intel 0000:00:00.0: detected 131068K stolen memory [ 7.263993] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 7.336681] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 7.627296] cfg80211: Calling CRDA to update world regulatory domain [ 7.644422] ACPI: AC Adapter [ACAD] (on-line) [ 8.039228] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 8.044073] ACPI: Power Button [PWRF] [ 8.091994] scsi 6:0:0:0: Direct-Access ST336032 0AS PQ: 0 ANSI: 2 [ 8.096983] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 8.102854] sd 6:0:0:0: [sdb] 703282608 512-byte hardware sectors: (360 GB/335 GiB) [ 8.110229] sd 6:0:0:0: [sdb] Write Protect is off [ 8.115274] sd 6:0:0:0: [sdb] Mode Sense: 38 00 00 00 [ 8.115276] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 8.120604] usb-storage: device scan complete [ 8.123470] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 8.128285] sdb:<6>cfg80211: World regulatory domain updated: [ 8.222368] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.227241] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.306591] scsi 7:0:0:0: Direct-Access WD 5000AAJ External 1.06 PQ: 0 ANSI: 0 [ 8.311774] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 8.317460] sd 7:0:0:0: [sdc] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 8.324089] sd 7:0:0:0: [sdc] Write Protect is off [ 8.329156] sd 7:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 8.329158] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 8.335581] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 8.335587] usb-storage: device scan complete [ 8.340555] sdc: sdc1 [ 8.346134] sd 7:0:0:0: [sdc] Attached SCSI disk [ 8.365280] sky2 driver version 1.22 [ 8.370406] sky2 0000:07:00.0: enabling device (0000 -> 0003) [ 8.375324] sky2 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.380277] sky2 0000:07:00.0: setting latency timer to 64 [ 8.380359] sky2 0000:07:00.0: Yukon-2 FE+ chip revision 0 [ 8.385425] alloc irq_desc for 28 on cpu 0 node 0 [ 8.385427] alloc kstat_irqs on cpu 0 node 0 [ 8.385444] sky2 0000:07:00.0: irq 28 for MSI/MSI-X [ 8.385674] iTCO_vendor_support: vendor-support=0 [ 8.386877] sky2 eth0: addr 00:23:8b:67:11:3b [ 8.420965] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 8.458203] ACPI: Battery Slot [BAT1] (battery present) [ 8.463232] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5 [ 8.468404] ACPI: Power Button [PWRB] [ 8.473869] ACPI: WMI: Mapper loaded [ 8.476325] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6 [ 8.476569] ACPI: Lid Switch [LID] [ 8.528090] thermal LNXTHERM:01: registered as thermal_zone0 [ 8.533208] ACPI: Thermal Zone [THRM] (56 C) [ 8.590225] usblp0: USB Bidirectional printer dev 8 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5611 [ 8.595611] usbcore: registered new interface driver usblp [ 8.625339] ACPI: SSDT 00000000b5f1ac20 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 8.631509] ACPI: SSDT 00000000b5f18620 00594 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 8.639093] ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320] [ 8.644984] Monitor-Mwait will be used to enter C-1 state [ 8.645010] Monitor-Mwait will be used to enter C-2 state [ 8.645048] Monitor-Mwait will be used to enter C-3 state [ 8.645051] Marking TSC unstable due to TSC halts in idle [ 8.650588] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 8.656190] processor ACPI_CPU:00: registered as cooling_device0 [ 8.661567] ACPI: Processor [CPU0] (supports 8 throttling states) [ 8.667554] ACPI: SSDT 00000000b5f19ca0 001CF (v01 PmRef ApIst 00003000 INTL 20061109) [ 8.673621] ACPI: SSDT 00000000b5f19f20 0008D (v01 PmRef ApCst 00003000 INTL 20061109) [ 8.679893] ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320] [ 8.685859] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 8.692147] processor ACPI_CPU:01: registered as cooling_device1 [ 8.697693] ACPI: Processor [CPU1] (supports 8 throttling states) [ 8.894372] scsi 8:0:0:0: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0 [ 8.899948] sd 8:0:0:0: Attached scsi generic sg4 type 0 [ 8.905866] sd 8:0:0:0: [sdd] Attached SCSI removable disk [ 8.911701] scsi 8:0:0:1: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0 [ 8.917255] sd 8:0:0:1: Attached scsi generic sg5 type 0 [ 8.923352] sd 8:0:0:1: [sde] Attached SCSI removable disk [ 8.929306] scsi 8:0:0:2: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0 [ 8.935147] sd 8:0:0:2: Attached scsi generic sg6 type 0 [ 8.941752] sd 8:0:0:2: [sdf] Attached SCSI removable disk [ 8.947806] scsi 8:0:0:3: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0 [ 8.953540] sd 8:0:0:3: Attached scsi generic sg7 type 0 [ 8.960106] sd 8:0:0:3: [sdg] Attached SCSI removable disk [ 8.965736] usb-storage: device scan complete [ 9.087868] scsi 9:0:0:0: Direct-Access HP Photosmart C3180 1.00 PQ: 0 ANSI: 2 [ 9.093510] sd 9:0:0:0: Attached scsi generic sg8 type 0 [ 9.099741] sd 9:0:0:0: [sdh] Attached SCSI removable disk [ 9.105532] usb-storage: device scan complete [ 9.347368] scsi 10:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-W162C TS09 PQ: 0 ANSI: 0 [ 9.353167] scsi 10:0:0:0: Attached scsi generic sg9 type 5 [ 9.359665] usb-storage: device scan complete [ 9.500062] Clocksource tsc unstable (delta = -366423927 ns) [ 12.440114] sdb1 [ 12.445837] sd 6:0:0:0: [sdb] Attached SCSI disk [ 12.622105] ohci1394 0000:0a:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 12.679308] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[ff501000-ff5017ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 13.004508] Driver 'sr' needs updating - please use bus_type methods [ 13.014032] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 13.020090] Uniform CD-ROM driver Revision: 3.20 [ 13.026304] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 13.035971] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 13.042218] sr 10:0:0:0: Attached scsi CD-ROM sr1 [ 13.043779] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 13.049930] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460) [ 13.056096] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 13.201543] sdhci: Secure Digital Host Controller Interface driver [ 13.207411] sdhci: Copyright(c) Pierre Ossman [ 13.360376] Linux video capture interface: v2.00 [ 13.617390] sdhci-pci 0000:0a:01.2: SDHCI controller found [1217:7120] (rev 2) [ 13.623457] sdhci-pci 0000:0a:01.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 13.629432] mmc0: Unknown controller version (2). You may experience problems. [ 13.635375] Registered led device: mmc0:: [ 13.641203] mmc0: SDHCI controller on PCI [0000:0a:01.2] using DMA [ 13.800135] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds [ 13.805978] iwlagn: Copyright(c) 2003-2009 Intel Corporation [ 13.811871] iwlagn 0000:08:00.0: enabling device (0000 -> 0002) [ 13.817688] iwlagn 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 13.823437] iwlagn 0000:08:00.0: setting latency timer to 64 [ 13.823518] iwlagn 0000:08:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 [ 13.851383] iwlagn 0000:08:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 13.857255] alloc irq_desc for 29 on cpu 0 node 0 [ 13.857258] alloc kstat_irqs on cpu 0 node 0 [ 13.857281] iwlagn 0000:08:00.0: irq 29 for MSI/MSI-X [ 13.874056] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 13.938234] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008) [ 13.947323] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input7 [ 13.953346] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001b240001542c7b] [ 13.953431] usbcore: registered new interface driver uvcvideo [ 13.959370] USB Video Class driver (v0.1.0) [ 13.986181] alloc irq_desc for 22 on cpu 0 node 0 [ 13.986185] alloc kstat_irqs on cpu 0 node 0 [ 13.986193] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 13.992269] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 14.101647] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 14.107668] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/input/input9 [ 14.113555] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/input/input10 [ 14.231292] phy1: Selected rate control algorithm 'minstrel' [ 14.231873] Registered led device: rt73usb-phy1::radio [ 14.237774] Registered led device: rt73usb-phy1::assoc [ 14.243513] Registered led device: rt73usb-phy1::quality [ 14.249870] usbcore: registered new interface driver rt73usb [ 14.765800] Adding 4200956k swap on /dev/sda1. Priority:-1 extents:1 across:4200956k [ 15.798788] device-mapper: uevent: version 1.0.3 [ 15.804720] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 16.230998] loop: module loaded [ 17.183110] fuse init (API version 7.11) [ 35.530624] [drm] Initialized drm 1.1.0 20060810 [ 36.292178] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 36.292191] pci 0000:00:02.0: setting latency timer to 64 [ 36.318192] alloc irq_desc for 30 on cpu 0 node 0 [ 36.318196] alloc kstat_irqs on cpu 0 node 0 [ 36.318206] pci 0000:00:02.0: irq 30 for MSI/MSI-X [ 36.378925] acpi device:05: registered as cooling_device2 [ 36.380238] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input11 [ 36.380351] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 36.380436] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 38.844509] Bluetooth: Core ver 2.15 [ 38.844554] NET: Registered protocol family 31 [ 38.844556] Bluetooth: HCI device and connection manager initialized [ 38.844559] Bluetooth: HCI socket layer initialized [ 40.322730] Bluetooth: L2CAP ver 2.13 [ 40.322737] Bluetooth: L2CAP socket layer initialized [ 43.583448] Bluetooth: RFCOMM socket layer initialized [ 43.583465] Bluetooth: RFCOMM TTY layer initialized [ 43.583470] Bluetooth: RFCOMM ver 1.11 [ 43.686585] Bluetooth: SCO (Voice Link) ver 0.6 [ 43.686592] Bluetooth: SCO socket layer initialized [ 44.554090] sky2 eth0: enabling interface [ 44.554675] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 44.592500] rt73usb 2-1:1.0: firmware: requesting rt73.bin [ 45.031727] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 45.034407] iwlagn 0000:08:00.0: firmware: requesting iwlwifi-5000-2.ucode [ 45.138666] iwlagn 0000:08:00.0: loaded firmware version 8.24.2.12 [ 45.275467] Registered led device: iwl-phy0::radio [ 45.275998] Registered led device: iwl-phy0::assoc [ 45.278984] Registered led device: iwl-phy0::RX [ 45.279048] Registered led device: iwl-phy0::TX [ 45.285366] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 45.574810] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 45.574818] Bluetooth: BNEP filters: protocol multicast [ 45.875977] NET: Registered protocol family 17 [ 46.787576] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both [ 46.789359] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 47.916094] Bridge firewalling registered [ 54.250106] [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 [ 57.213542] eth0: no IPv6 routers present