| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200908211814.56800.volkerarmin@googlemail.com>
Date: Fri, 21 Aug 2009 18:14:56 +0200
From: Volker Armin Hemmann <volkerarmin@...glemail.com>
To: linux-kernel@...r.kernel.org
Subject: amd64 + mtrr: only 3.1gb of 8gb are covered, kernel 2.6.30 and earlier.
Hi,
I have an amd64 system with 8GB ram. Of these only 3.1GB are currently covered
with mtrr:
cat /proc/mtrr
reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back
reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back
reg02: base=0x0c0000000 ( 3072MB), size= 128MB, count=1: write-back
This is with a Phenom II X4. Mobo is an Asrock A770Crossfire with AMD 770
chipset. Ram is 1066 ddr2 running at 800.
Before that I had a X2 6000 where I had one more mtrr, covering additional
256mb with 6gb ram total.
When I use the opensource driver, I get a 'mtrr disabled' message when X
starts, nothing like that with fglrx. The results are the same.
Is there anything that I can do about it? I already played with mtrr cleanup
options - without any results.
Except for reiser4 the kernel is 'vanilla', config is attached, dmesg and lspci
are folloiwing:
dmesg:
[ 0.000000] Linux version 2.6.30.5r4 (root@...rgy) (gcc version 4.4.1
(Gentoo 4.4.1 p1.0) ) #1 SMP Tue Aug 18 06:28:18 CEST 2009
[ 0.000000] Command line: root=/dev/md1 md=3,/dev/sda3,/dev/sdb3,/dev/sdc3
nmi_watchdog=0 mtrr_spare_reg_nr=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7eb0000 (usable)
[ 0.000000] BIOS-e820: 00000000c7eb0000 - 00000000c7ec0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000c7ec0000 - 00000000c7ef0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000c7ef0000 - 00000000c7f00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000238000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0x238000 max_arch_pfn = 0x100000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000238000000 aka 9088M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820 update range: 00000000c8000000 - 0000000100000000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0xc7eb0 max_arch_pfn = 0x100000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000c7eb0000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00c7e00000 page 2M
[ 0.000000] 00c7e00000 - 00c7eb0000 page 4k
[ 0.000000] kernel direct mapping tables up to c7eb0000 @ 10000-13000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000238000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 0238000000 page 2M
[ 0.000000] kernel direct mapping tables up to 238000000 @ 12000-14000
[ 0.000000] ACPI: RSDP 00000000000fa7c0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000c7eb0000 00040 (v01 050609 RSDT2000 20090506
MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000c7eb0200 00084 (v02 A M I OEMFACP 12000601
MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000c7eb0440 08512 (v01 AS140 AS140121 00000121
INTL 20051117)
[ 0.000000] ACPI: FACS 00000000c7ec0000 00040
[ 0.000000] ACPI: APIC 00000000c7eb0390 0006C (v01 050609 APIC2000 20090506
MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000c7eb0400 0003C (v01 050609 OEMMCFG 20090506
MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000c7ec0040 00071 (v01 050609 OEMB2000 20090506
MSFT 00000097)
[ 0.000000] ACPI: AAFT 00000000c7eb8960 00027 (v01 050609 OEMAAFT 20090506
MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000c7eb8990 00038 (v01 050609 OEMHPET 20090506
MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000c7eb89d0 0088C (v01 A M I POWERNOW 00000001
AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0238000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000
- 0000008000]
[ 0.000000] #2 [0001000000 - 0001575998] TEXT DATA BSS ==> [0001000000
- 0001575998]
[ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00
- 0000100000]
[ 0.000000] #4 [0001576000 - 0001576133] BRK ==> [0001576000
- 0001576133]
[ 0.000000] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000
- 0000012000]
[ 0.000000] #6 [0000012000 - 0000013000] PGTABLE ==> [0000012000
- 0000013000]
[ 0.000000] [ffffe20000000000-ffffe20007dfffff] PMD -> [ffff880028200000-
ffff88002fffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00238000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000c7eb0
[ 0.000000] 0: 0x00100000 -> 0x00238000
[ 0.000000] On node 0 totalpages: 2096703
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 102 pages reserved
[ 0.000000] DMA zone: 3825 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 800488 pages, LIFO batch:31
[ 0.000000] Normal zone: 17472 pages used for memmap
[ 0.000000] Normal zone: 1260480 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000c7eb0000 -
00000000c7ec0000
[ 0.000000] PM: Registered nosave memory: 00000000c7ec0000 -
00000000c7ef0000
[ 0.000000] PM: Registered nosave memory: 00000000c7ef0000 -
00000000c7f00000
[ 0.000000] PM: Registered nosave memory: 00000000c7f00000 -
00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at c8000000 (gap:
c7f00000:38000000)
[ 0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 24 pages at ffff880028034000, static data 67808
bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 2064793
[ 0.000000] Kernel command line: root=/dev/md1
md=3,/dev/sda3,/dev/sdb3,/dev/sdc3 nmi_watchdog=0 mtrr_spare_reg_nr=1
[ 0.000000] md: Will configure md3 (super-block) from
/dev/sda3,/dev/sdb3,/dev/sdc3, below.
[ 0.000000] Initializing CPU#0
[ 0.000000] NR_IRQS:384
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3199.760 MHz processor.
[ 0.003333] Console: colour VGA+ 80x25
[ 0.003333] console [tty0] enabled
[ 0.003333] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[ 0.003333] Inode-cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.003333] Checking aperture...
[ 0.003333] No AGP bridge found
[ 0.003333] Node 0: aperture @ 20000000 size 32 MB
[ 0.003333] Aperture pointing to e820 RAM. Ignoring.
[ 0.003333] Your BIOS doesn't leave a aperture memory hole
[ 0.003333] Please enable the IOMMU option in the BIOS setup
[ 0.003333] This costs you 64 MB of RAM
[ 0.003333] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.003333] PM: Registered nosave memory: 0000000020000000 -
0000000024000000
[ 0.003333] Memory: 8172700k/9306112k available (3231k kernel code, 919300k
absent, 213188k reserved, 1310k data, 348k init)
[ 0.003333] hpet clockevent registered
[ 0.003333] HPET: 4 timers in total, 1 timers will be used for per-cpu
timer
[ 0.003339] Calibrating delay loop (skipped), value calculated using timer
frequency.. 6402.15 BogoMIPS (lpj=10665853)
[ 0.003445] Mount-cache hash table entries: 256
[ 0.003564] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.003599] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003634] tseg: 0000000000
[ 0.003639] CPU: Physical Processor ID: 0
[ 0.003672] CPU: Processor Core ID: 0
[ 0.003710] using C1E aware idle routine
[ 0.003754] ACPI: Core revision 20090320
[ 0.016700] Setting APIC routing to flat
[ 0.017036] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.050750] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.053332] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.003333] Initializing CPU#1
[ 0.003333] Calibrating delay using timer specific routine.. 6402.85
BogoMIPS (lpj=10666967)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.003333] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 1
[ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new
0x7010600070106
[ 0.144205] CPU1: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.144518] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.146715] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.003333] Initializing CPU#2
[ 0.003333] Calibrating delay using timer specific routine.. 6402.85
BogoMIPS (lpj=10666975)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.003333] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 2
[ 0.003333] x86 PAT enabled: cpu 2, old 0x7040600070406, new
0x7010600070106
[ 0.240829] CPU2: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.241142] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.243382] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.003333] Initializing CPU#3
[ 0.003333] Calibrating delay using timer specific routine.. 6402.85
BogoMIPS (lpj=10666968)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.003333] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 3
[ 0.003333] x86 PAT enabled: cpu 3, old 0x7040600070406, new
0x7010600070106
[ 0.337453] CPU3: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.337766] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.340014] Brought up 4 CPUs
[ 0.340047] Total of 4 processors activated (25610.72 BogoMIPS).
[ 0.340316] net_namespace: 1400 bytes
[ 0.340419] xor: automatically using best checksumming function:
generic_sse
[ 0.356667] generic_sse: 12784.800 MB/sec
[ 0.356701] xor: using function: generic_sse (12784.800 MB/sec)
[ 0.356754] Time: 18:06:22 Date: 08/21/09
[ 0.356835] NET: Registered protocol family 16
[ 0.357041] node 0 link 0: io port [1000, ffffff]
[ 0.357043] TOM: 00000000c8000000 aka 3200M
[ 0.357077] Fam 10h mmconf [e0000000, efffffff]
[ 0.357079] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.357081] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.357083] node 0 link 0: mmio [a0000, bffff]
[ 0.357085] node 0 link 0: mmio [c8000000, dfffffff]
[ 0.357086] TOM2: 0000000238000000 aka 9088M
[ 0.357120] bus: [00,07] on node 0 link 0
[ 0.357121] bus: 00 index 0 io port: [0, ffff]
[ 0.357122] bus: 00 index 1 mmio: [f0000000, ffffffff]
[ 0.357123] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.357124] bus: 00 index 3 mmio: [c8000000, dfffffff]
[ 0.357125] bus: 00 index 4 mmio: [238000000, fcffffffff]
[ 0.357133] ACPI: bus type pci registered
[ 0.357237] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.357272] PCI: Not using MMCONFIG.
[ 0.357305] PCI: Using configuration type 1 for base access
[ 0.357339] PCI: Using configuration type 1 for extended access
[ 0.358962] bio: create slab <bio-0> at 0
[ 0.359408] ACPI: EC: Look up EC in DSDT
[ 0.367191] ACPI: Interpreter enabled
[ 0.367226] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.367342] ACPI: Using IOAPIC for interrupt routing
[ 0.367420] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.370575] PCI: MCFG area at e0000000 reserved in ACPI motherboard
resources
[ 0.375709] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.381422] ACPI: No dock devices found.
[ 0.381651] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.381732] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
[ 0.381778] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.381813] pci 0000:00:02.0: PME# disabled
[ 0.381881] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.381916] pci 0000:00:09.0: PME# disabled
[ 0.382462] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.382497] pci 0000:00:0a.0: PME# disabled
[ 0.382575] pci 0000:00:11.0: reg 10 io port: [0x9000-0x9007]
[ 0.382581] pci 0000:00:11.0: reg 14 io port: [0x8000-0x8003]
[ 0.382587] pci 0000:00:11.0: reg 18 io port: [0x7000-0x7007]
[ 0.382593] pci 0000:00:11.0: reg 1c io port: [0x6000-0x6003]
[ 0.382598] pci 0000:00:11.0: reg 20 io port: [0x5000-0x500f]
[ 0.382604] pci 0000:00:11.0: reg 24 32bit mmio: [0xfddff800-0xfddffbff]
[ 0.382653] pci 0000:00:12.0: reg 10 32bit mmio: [0xfddfe000-0xfddfefff]
[ 0.382705] pci 0000:00:12.1: reg 10 32bit mmio: [0xfddfd000-0xfddfdfff]
[ 0.382773] pci 0000:00:12.2: reg 10 32bit mmio: [0xfddff000-0xfddff0ff]
[ 0.382823] pci 0000:00:12.2: supports D1 D2
[ 0.382824] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.382860] pci 0000:00:12.2: PME# disabled
[ 0.382922] pci 0000:00:13.0: reg 10 32bit mmio: [0xfddfc000-0xfddfcfff]
[ 0.382973] pci 0000:00:13.1: reg 10 32bit mmio: [0xfddf7000-0xfddf7fff]
[ 0.383041] pci 0000:00:13.2: reg 10 32bit mmio: [0xfddf6800-0xfddf68ff]
[ 0.383091] pci 0000:00:13.2: supports D1 D2
[ 0.383092] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.383128] pci 0000:00:13.2: PME# disabled
[ 0.383271] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.383277] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.383283] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.383288] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.383294] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
[ 0.383421] pci 0000:00:14.5: reg 10 32bit mmio: [0xfddf5000-0xfddf5fff]
[ 0.383555] pci 0000:02:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.383563] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdff0000-0xfdffffff]
[ 0.383567] pci 0000:02:00.0: reg 20 io port: [0xb000-0xb0ff]
[ 0.383574] pci 0000:02:00.0: reg 30 32bit mmio: [0xfdfc0000-0xfdfdffff]
[ 0.383590] pci 0000:02:00.0: supports D1 D2
[ 0.383617] pci 0000:02:00.1: reg 10 64bit mmio: [0xfdfec000-0xfdfeffff]
[ 0.383647] pci 0000:02:00.1: supports D1 D2
[ 0.383697] pci 0000:00:02.0: bridge io port: [0xb000-0xbfff]
[ 0.383699] pci 0000:00:02.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
[ 0.383702] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.383743] pci 0000:03:00.0: reg 10 io port: [0xd800-0xd8ff]
[ 0.383759] pci 0000:03:00.0: reg 18 64bit mmio: [0xfebff000-0xfebfffff]
[ 0.383774] pci 0000:03:00.0: reg 30 32bit mmio: [0xfebc0000-0xfebdffff]
[ 0.383809] pci 0000:03:00.0: supports D1 D2
[ 0.383810] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.383847] pci 0000:03:00.0: PME# disabled
[ 0.383929] pci 0000:00:09.0: bridge io port: [0xc000-0xdfff]
[ 0.383931] pci 0000:00:09.0: bridge 32bit mmio: [0xfe000000-0xfebfffff]
[ 0.383933] pci 0000:00:09.0: bridge 64bit mmio pref: [0xfa000000-0xfcefffff]
[ 0.383964] pci 0000:01:00.0: reg 10 io port: [0xa800-0xa8ff]
[ 0.383977] pci 0000:01:00.0: reg 18 64bit mmio: [0xcffff000-0xcfffffff]
[ 0.383987] pci 0000:01:00.0: reg 20 64bit mmio: [0xcffe0000-0xcffeffff]
[ 0.383992] pci 0000:01:00.0: reg 30 32bit mmio: [0xfdef0000-0xfdefffff]
[ 0.384019] pci 0000:01:00.0: supports D1 D2
[ 0.384021] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.384057] pci 0000:01:00.0: PME# disabled
[ 0.384143] pci 0000:00:0a.0: bridge io port: [0xa000-0xafff]
[ 0.384145] pci 0000:00:0a.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.384148] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xcff00000-0xcfffffff]
[ 0.384182] pci 0000:05:06.0: reg 10 32bit mmio: [0xfcfff000-0xfcffffff]
[ 0.384262] pci 0000:05:08.0: reg 10 io port: [0xe800-0xe83f]
[ 0.384320] pci 0000:05:08.0: supports D1 D2
[ 0.384362] pci 0000:00:14.4: transparent bridge
[ 0.384398] pci 0000:00:14.4: bridge io port: [0xe000-0xefff]
[ 0.384404] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfcf00000-0xfcffffff]
[ 0.384415] pci_bus 0000:00: on NUMA node 0
[ 0.384419] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.384552] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.384597] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.384641] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.384703] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.387518] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[ 0.387762] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
[ 0.388006] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.388247] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.388489] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0,
disabled.
[ 0.388777] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 12 14 15)
[ 0.389019] ACPI: PCI Interrupt Link [LNKG] (IRQs *4 10 11 12 14 15)
[ 0.389247] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 12 14 15)
[ 0.389635] SCSI subsystem initialized
[ 0.389721] libata version 3.00 loaded.
[ 0.389792] usbcore: registered new interface driver usbfs
[ 0.389850] usbcore: registered new interface driver hub
[ 0.389913] usbcore: registered new device driver usb
[ 0.446682] raid6: int64x1 2800 MB/s
[ 0.503351] raid6: int64x2 3604 MB/s
[ 0.560006] raid6: int64x4 2847 MB/s
[ 0.616678] raid6: int64x8 2701 MB/s
[ 0.673335] raid6: sse2x1 4094 MB/s
[ 0.730007] raid6: sse2x2 7122 MB/s
[ 0.786672] raid6: sse2x4 7749 MB/s
[ 0.786705] raid6: using algorithm sse2x4 (7749 MB/s)
[ 0.786789] PCI: Using ACPI for IRQ routing
[ 0.786827] pci 0000:00:00.0: BAR 3: can't allocate resource
[ 0.800198] PCI-DMA: Disabling AGP.
[ 0.800311] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.800346] PCI-DMA: using GART IOMMU.
[ 0.800380] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.802138] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
[ 0.802246] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.806695] hpet: hpet2 irq 24 for MSI
[ 0.816682] Switched to high resolution mode on CPU 0
[ 0.817787] Switched to high resolution mode on CPU 3
[ 0.817830] Switched to high resolution mode on CPU 2
[ 0.817873] Switched to high resolution mode on CPU 1
[ 0.826700] pnp: PnP ACPI init
[ 0.826753] ACPI: bus type pnp registered
[ 0.829214] pnp 00:0b: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3
(0x0-0x1fffffff), disabling
[ 0.829269] pnp 00:0b: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0
BAR 3 (0x0-0x1fffffff), disabling
[ 0.829324] pnp 00:0b: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0
BAR 3 (0x0-0x1fffffff), disabling
[ 0.829378] pnp 00:0b: mem resource (0x100000-0xc7efffff) overlaps
0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.829732] pnp: PnP ACPI: found 12 devices
[ 0.829766] ACPI: ACPI bus type pnp unregistered
[ 0.829806] system 00:06: iomem range 0xfec00000-0xfec00fff could not be
reserved
[ 0.829859] system 00:06: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 0.829897] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.829932] system 00:07: ioport range 0x40b-0x40b has been reserved
[ 0.829966] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
[ 0.830007] system 00:07: ioport range 0xc00-0xc01 has been reserved
[ 0.830042] system 00:07: ioport range 0xc14-0xc14 has been reserved
[ 0.830077] system 00:07: ioport range 0xc50-0xc51 has been reserved
[ 0.830111] system 00:07: ioport range 0xc52-0xc52 has been reserved
[ 0.830146] system 00:07: ioport range 0xc6c-0xc6c has been reserved
[ 0.830180] system 00:07: ioport range 0xc6f-0xc6f has been reserved
[ 0.830215] system 00:07: ioport range 0xcd0-0xcd1 has been reserved
[ 0.830249] system 00:07: ioport range 0xcd2-0xcd3 has been reserved
[ 0.830284] system 00:07: ioport range 0xcd4-0xcd5 has been reserved
[ 0.830319] system 00:07: ioport range 0xcd6-0xcd7 has been reserved
[ 0.830353] system 00:07: ioport range 0xcd8-0xcdf has been reserved
[ 0.830388] system 00:07: ioport range 0x800-0x89f has been reserved
[ 0.830423] system 00:07: ioport range 0xb00-0xb0f has been reserved
[ 0.830457] system 00:07: ioport range 0xb20-0xb3f has been reserved
[ 0.830492] system 00:07: ioport range 0x900-0x90f has been reserved
[ 0.830526] system 00:07: ioport range 0x910-0x91f has been reserved
[ 0.830561] system 00:07: ioport range 0xfe00-0xfefe has been reserved
[ 0.830596] system 00:07: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.830631] system 00:07: iomem range 0xfec10000-0xfec1001f has been
reserved
[ 0.830668] system 00:09: ioport range 0x290-0x29f has been reserved
[ 0.830704] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.830740] system 00:0b: iomem range 0xfec00000-0xffffffff could not be
reserved
[ 0.835633] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
[ 0.835668] pci 0000:00:02.0: IO window: 0xb000-0xbfff
[ 0.835703] pci 0000:00:02.0: MEM window: 0xfdf00000-0xfdffffff
[ 0.835739] pci 0000:00:02.0: PREFETCH window:
0x000000d0000000-0x000000dfffffff
[ 0.835793] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03
[ 0.835828] pci 0000:00:09.0: IO window: 0xc000-0xdfff
[ 0.835863] pci 0000:00:09.0: MEM window: 0xfe000000-0xfebfffff
[ 0.835898] pci 0000:00:09.0: PREFETCH window:
0x000000fa000000-0x000000fcefffff
[ 0.835952] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:01
[ 0.835987] pci 0000:00:0a.0: IO window: 0xa000-0xafff
[ 0.836022] pci 0000:00:0a.0: MEM window: 0xfde00000-0xfdefffff
[ 0.836057] pci 0000:00:0a.0: PREFETCH window:
0x000000cff00000-0x000000cfffffff
[ 0.836112] pci 0000:00:14.4: PCI bridge, secondary bus 0000:05
[ 0.836147] pci 0000:00:14.4: IO window: 0xe000-0xefff
[ 0.836184] pci 0000:00:14.4: MEM window: disabled
[ 0.836220] pci 0000:00:14.4: PREFETCH window:
0x000000fcf00000-0x000000fcffffff
[ 0.836284] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.836320] pci 0000:00:02.0: setting latency timer to 64
[ 0.836325] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.836361] pci 0000:00:09.0: setting latency timer to 64
[ 0.836364] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.836399] pci 0000:00:0a.0: setting latency timer to 64
[ 0.836406] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.836408] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.836409] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff]
[ 0.836411] pci_bus 0000:02: resource 1 mem: [0xfdf00000-0xfdffffff]
[ 0.836412] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.836413] pci_bus 0000:03: resource 0 io: [0xc000-0xdfff]
[ 0.836415] pci_bus 0000:03: resource 1 mem: [0xfe000000-0xfebfffff]
[ 0.836416] pci_bus 0000:03: resource 2 pref mem [0xfa000000-0xfcefffff]
[ 0.836418] pci_bus 0000:01: resource 0 io: [0xa000-0xafff]
[ 0.836419] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.836420] pci_bus 0000:01: resource 2 pref mem [0xcff00000-0xcfffffff]
[ 0.836422] pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
[ 0.836423] pci_bus 0000:05: resource 2 pref mem [0xfcf00000-0xfcffffff]
[ 0.836424] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.836426] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.836479] NET: Registered protocol family 2
[ 0.873408] IP route cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.873918] TCP established hash table entries: 262144 (order: 10, 4194304
bytes)
[ 0.874895] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.875292] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.875327] TCP reno registered
[ 0.883428] NET: Registered protocol family 1
[ 0.885125] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.885267] Loading Reiser4. See www.namesys.com for a description of
Reiser4.
[ 0.885403] msgmni has been set to 15964
[ 0.885668] alg: No test for stdrng (krng)
[ 0.885707] async_tx: api initialized (sync-only)
[ 0.885786] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.885839] io scheduler noop registered
[ 0.885883] io scheduler cfq registered (default)
[ 0.886008] pci 0000:02:00.0: Boot video device
[ 0.886108] pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X
[ 0.886115] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 0.886207] pcieport-driver 0000:00:09.0: irq 26 for MSI/MSI-X
[ 0.886214] pcieport-driver 0000:00:09.0: setting latency timer to 64
[ 0.886303] pcieport-driver 0000:00:0a.0: irq 27 for MSI/MSI-X
[ 0.886309] pcieport-driver 0000:00:0a.0: setting latency timer to 64
[ 0.886528] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.886581] ACPI: Power Button [PWRF]
[ 0.886662] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.886724] ACPI: Power Button [PWRB]
[ 0.886868] processor ACPI_CPU:00: registered as cooling_device0
[ 0.886903] ACPI: Processor [P001] (supports 8 throttling states)
[ 0.886998] processor ACPI_CPU:01: registered as cooling_device1
[ 0.887066] processor ACPI_CPU:02: registered as cooling_device2
[ 0.887134] processor ACPI_CPU:03: registered as cooling_device3
[ 0.890988] Linux agpgart interface v0.103
[ 0.891110] Driver 'sd' needs updating - please use bus_type methods
[ 0.891197] ahci 0000:00:11.0: version 3.0
[ 0.891209] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.891353] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f
impl SATA mode
[ 0.891407] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio
slum part
[ 0.891916] scsi0 : ahci
[ 0.892055] scsi1 : ahci
[ 0.892146] scsi2 : ahci
[ 0.892234] scsi3 : ahci
[ 0.892323] scsi4 : ahci
[ 0.892413] scsi5 : ahci
[ 0.892540] ata1: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed
[ 0.892576] ata2: SATA max UDMA/133 abar m1024@...ddff800 port 0xfddff980 irq
22
[ 0.892630] ata3: SATA max UDMA/133 abar m1024@...ddff800 port 0xfddffa00 irq
22
[ 0.892683] ata4: SATA max UDMA/133 abar m1024@...ddff800 port 0xfddffa80 irq
22
[ 0.892737] ata5: SATA max UDMA/133 abar m1024@...ddff800 port 0xfddffb00 irq
22
[ 0.892791] ata6: SATA max UDMA/133 abar m1024@...ddff800 port 0xfddffb80 irq
22
[ 0.893006] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.893043] PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 0.893561] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.893654] mice: PS/2 mouse device common for all mice
[ 0.893782] rtc_cmos 00:02: RTC can wake from S4
[ 0.893847] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.893902] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.893957] md: raid1 personality registered for level 1
[ 0.893991] md: raid6 personality registered for level 6
[ 0.894025] md: raid5 personality registered for level 5
[ 0.894059] md: raid4 personality registered for level 4
[ 0.894169] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
dm-devel@...hat.com
[ 0.894264] cpuidle: using governor ladder
[ 0.894400] usbcore: registered new interface driver hiddev
[ 0.894454] usbcore: registered new interface driver usbhid
[ 0.894488] usbhid: v2.6:USB HID core driver
[ 0.894562] TCP cubic registered
[ 0.894596] NET: Registered protocol family 17
[ 0.894654] powernow-k8: Found 1 AMD Phenom(tm) II X4 955 Processor
processors (4 cpu cores) (version 2.20.00)
[ 0.895233] powernow-k8: 0 : pstate 0 (3200 MHz)
[ 0.895269] powernow-k8: 1 : pstate 1 (2500 MHz)
[ 0.895303] powernow-k8: 2 : pstate 2 (2100 MHz)
[ 0.895336] powernow-k8: 3 : pstate 3 (800 MHz)
[ 0.895713] PM: Resume from disk failed.
[ 0.895806] Magic number: 5:564:140
[ 0.895863] acpi device:11: hash matches
[ 0.920790] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input2
[ 1.211283] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.211344] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.211396] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.211450] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.214613] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.217640] ata4.00: ATA-7: SAMSUNG HD753LJ, 1AA01113, max UDMA7
[ 1.217680] ata4.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.217726] ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01110, max UDMA7
[ 1.217761] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.224134] ata4.00: configured for UDMA/133
[ 1.224187] ata2.00: configured for UDMA/133
[ 1.611284] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.617637] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01109, max UDMA7
[ 1.617674] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.624092] ata1.00: configured for UDMA/133
[ 1.637994] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0
PQ: 0 ANSI: 5
[ 1.638206] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.638258] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500
GB/465 GiB)
[ 1.638325] sd 0:0:0:0: [sda] Write Protect is off
[ 1.638359] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.638372] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.638432] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0
PQ: 0 ANSI: 5
[ 1.638468] sda:<5>sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors:
(500 GB/465 GiB)
[ 1.638628] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.638719] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.638754] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.638763] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.638857] sdb:<5>scsi 3:0:0:0: Direct-Access ATA SAMSUNG
HD753LJ 1AA0 PQ: 0 ANSI: 5
[ 1.639075] sd 3:0:0:0: [sdc] 1465149168 512-byte hardware sectors: (750
GB/698 GiB)
[ 1.639079] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1.639167] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.639201] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.639209] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.639290] sdc: sda1 sda2 sda3 sda4 < sdc1 sdc2 sdc3 sdc4 < sdb1 sdb2
sdb3 sdb4 < sdb5 sda5 sdc5 sdc6 sda6 >
[ 1.661815] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.667853] sdb6 >
[ 1.668156] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.671409] sdc7 >
[ 1.671734] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.671776] md: Waiting for all devices to be available before autodetect
[ 1.671811] md: If you don't use raid, use raid=noautodetect
[ 1.671909] md: Autodetecting RAID arrays.
[ 1.778184] md: Scanned 12 and added 12 devices.
[ 1.778219] md: autorun ...
[ 1.778252] md: considering sdc6 ...
[ 1.778289] md: adding sdc6 ...
[ 1.778323] md: sdc5 has different UUID to sdc6
[ 1.778357] md: sdc3 has different UUID to sdc6
[ 1.778392] md: sdc1 has different UUID to sdc6
[ 1.778427] md: adding sdb6 ...
[ 1.778461] md: sdb5 has different UUID to sdc6
[ 1.778495] md: sdb3 has different UUID to sdc6
[ 1.778529] md: sdb1 has different UUID to sdc6
[ 1.778564] md: adding sda6 ...
[ 1.778598] md: sda5 has different UUID to sdc6
[ 1.778632] md: sda3 has different UUID to sdc6
[ 1.778667] md: sda1 has different UUID to sdc6
[ 1.778789] md: created md3
[ 1.778822] md: bind<sda6>
[ 1.778859] md: bind<sdb6>
[ 1.778895] md: bind<sdc6>
[ 1.778932] md: running: <sdc6><sdb6><sda6>
[ 1.779059] raid5: device sdc6 operational as raid disk 2
[ 1.779093] raid5: device sdb6 operational as raid disk 1
[ 1.779127] raid5: device sda6 operational as raid disk 0
[ 1.779316] raid5: allocated 3220kB for md3
[ 1.779368] raid5: raid level 5 set md3 active with 3 out of 3 devices,
algorithm 2
[ 1.779421] RAID5 conf printout:
[ 1.779454] --- rd:3 wd:3
[ 1.779487] disk 0, o:1, dev:sda6
[ 1.779520] disk 1, o:1, dev:sdb6
[ 1.779554] disk 2, o:1, dev:sdc6
[ 1.779626] md: considering sdc5 ...
[ 1.779661] md: adding sdc5 ...
[ 1.779695] md: sdc3 has different UUID to sdc5
[ 1.779730] md: sdc1 has different UUID to sdc5
[ 1.779764] md: adding sdb5 ...
[ 1.779798] md: sdb3 has different UUID to sdc5
[ 1.779833] md: sdb1 has different UUID to sdc5
[ 1.779868] md: adding sda5 ...
[ 1.779901] md: sda3 has different UUID to sdc5
[ 1.779936] md: sda1 has different UUID to sdc5
[ 1.780031] md: created md2
[ 1.780064] md: bind<sda5>
[ 1.780101] md: bind<sdb5>
[ 1.780137] md: bind<sdc5>
[ 1.780173] md: running: <sdc5><sdb5><sda5>
[ 1.780292] raid5: device sdc5 operational as raid disk 2
[ 1.780326] raid5: device sdb5 operational as raid disk 1
[ 1.780359] raid5: device sda5 operational as raid disk 0
[ 1.780550] raid5: allocated 3220kB for md2
[ 1.780600] raid5: raid level 5 set md2 active with 3 out of 3 devices,
algorithm 2
[ 1.780653] RAID5 conf printout:
[ 1.780686] --- rd:3 wd:3
[ 1.780719] disk 0, o:1, dev:sda5
[ 1.780752] disk 1, o:1, dev:sdb5
[ 1.780785] disk 2, o:1, dev:sdc5
[ 1.780856] md: considering sdc3 ...
[ 1.780892] md: adding sdc3 ...
[ 1.780926] md: sdc1 has different UUID to sdc3
[ 1.780961] md: adding sdb3 ...
[ 1.780994] md: sdb1 has different UUID to sdc3
[ 1.781029] md: adding sda3 ...
[ 1.781063] md: sda1 has different UUID to sdc3
[ 1.781160] md: created md1
[ 1.781193] md: bind<sda3>
[ 1.781229] md: bind<sdb3>
[ 1.781269] md: bind<sdc3>
[ 1.781305] md: running: <sdc3><sdb3><sda3>
[ 1.781441] raid5: device sdc3 operational as raid disk 2
[ 1.781475] raid5: device sdb3 operational as raid disk 1
[ 1.781509] raid5: device sda3 operational as raid disk 0
[ 1.781707] raid5: allocated 3220kB for md1
[ 1.781755] raid5: raid level 5 set md1 active with 3 out of 3 devices,
algorithm 2
[ 1.781807] RAID5 conf printout:
[ 1.781840] --- rd:3 wd:3
[ 1.781873] disk 0, o:1, dev:sda3
[ 1.781907] disk 1, o:1, dev:sdb3
[ 1.781940] disk 2, o:1, dev:sdc3
[ 1.782006] md: considering sdc1 ...
[ 1.782042] md: adding sdc1 ...
[ 1.782077] md: adding sdb1 ...
[ 1.782111] md: adding sda1 ...
[ 1.782144] md: created md0
[ 1.782177] md: bind<sda1>
[ 1.782213] md: bind<sdb1>
[ 1.782250] md: bind<sdc1>
[ 1.782286] md: running: <sdc1><sdb1><sda1>
[ 1.782435] raid1: raid set md0 active with 3 out of 3 mirrors
[ 1.782496] md: ... autorun DONE.
[ 1.782545] md: Loading md3: /dev/sda3
[ 1.782584] md3: unknown partition table
[ 1.782743] md: couldn't update array info. -22
[ 1.782780] md: could not bd_claim sda3.
[ 1.782814] md: md_import_device returned -16
[ 1.782849] md: could not bd_claim sdb3.
[ 1.782883] md: md_import_device returned -16
[ 1.782918] md: could not bd_claim sdc3.
[ 1.782951] md: md_import_device returned -16
[ 1.782986] md: starting md3 failed
[ 1.783062] md1: unknown partition table
[ 1.828578] reiser4: md1: found disk format 4.0.0.
[ 5.831455] VFS: Mounted root (reiser4 filesystem) readonly on device 9:1.
[ 5.831506] Freeing unused kernel memory: 348k freed
[ 9.678802] udev: starting version 145
[ 9.860154] md2:<6> md0: unknown partition table
[ 9.941283] unknown partition table
[ 10.440126] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 10.440143] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 10.440157] r8169 0000:03:00.0: setting latency timer to 64
[ 10.440428] r8169 0000:03:00.0: irq 28 for MSI/MSI-X
[ 10.440505] eth0: RTL8168b/8111b at 0xffffc20012f54000, 00:e0:45:46:00:29,
XID 38000000 IRQ 28
[ 10.441896] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 10.441905] r8169 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.441912] r8169 0000:01:00.0: setting latency timer to 64
[ 10.441963] r8169 0000:01:00.0: irq 29 for MSI/MSI-X
[ 10.442010] eth1: RTL8168c/8111c at 0xffffc2000006a000, 00:19:66:86:ce:12,
XID 3c4000c0 IRQ 29
[ 10.445199] udev: renamed network interface eth1 to eth0
[ 10.463384] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.463405] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 10.463437] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 10.463663] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus
number 1
[ 10.463685] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze
workaround
[ 10.463701] ehci_hcd 0000:00:12.2: debug port 1
[ 10.463717] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfddff000
[ 10.474599] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 10.474625] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.474626] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 10.474628] usb usb1: Product: EHCI Host Controller
[ 10.474630] usb usb1: Manufacturer: Linux 2.6.30.5r4 ehci_hcd
[ 10.474631] usb usb1: SerialNumber: 0000:00:12.2
[ 10.474997] usb usb1: configuration #1 chosen from 1 choice
[ 10.475042] hub 1-0:1.0: USB hub found
[ 10.475047] hub 1-0:1.0: 6 ports detected
[ 10.475268] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 10.475293] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 10.475443] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus
number 2
[ 10.475463] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze
workaround
[ 10.475480] ehci_hcd 0000:00:13.2: debug port 1
[ 10.475493] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfddf6800
[ 10.484596] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 10.484608] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.484609] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 10.484611] usb usb2: Product: EHCI Host Controller
[ 10.484612] usb usb2: Manufacturer: Linux 2.6.30.5r4 ehci_hcd
[ 10.484613] usb usb2: SerialNumber: 0000:00:13.2
[ 10.484681] usb usb2: configuration #1 chosen from 1 choice
[ 10.484709] hub 2-0:1.0: USB hub found
[ 10.484714] hub 2-0:1.0: 6 ports detected
[ 10.495237] udev: renamed network interface _rename to eth1
[ 10.520914] Linux video capture interface: v2.00
[ 10.528998] bttv: driver version 0.9.18 loaded
[ 10.529000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 10.529041] bttv: Bt8xx card found (0).
[ 10.529053] bttv 0000:05:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 10.529063] bttv0: Bt848 (rev 18) at 0000:05:06.0, irq: 21, latency: 128,
mmio: 0xfcfff000
[ 10.529090] bttv0: using: Terratec TerraTV+ Version 1.0 (Bt848)/ Terra
TValue Version 1.0/ Vobis TV-Boostar [card=25,insmod option]
[ 10.529093] IRQ 21/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
[ 10.529127] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
[ 10.780436] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 10.905489] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[ 10.905491] usb 1-2: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 10.905492] usb 1-2: Product: USB2.0 Hub
[ 10.905542] usb 1-2: configuration #1 chosen from 1 choice
[ 10.905975] hub 1-2:1.0: USB hub found
[ 10.906238] hub 1-2:1.0: 4 ports detected
[ 11.175248] usb 1-2.1: new low speed USB device using ehci_hcd and address
3
[ 11.265001] usb 1-2.1: New USB device found, idVendor=046d, idProduct=c518
[ 11.265002] usb 1-2.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 11.265003] usb 1-2.1: Product: USB Receiver
[ 11.265005] usb 1-2.1: Manufacturer: Logitech
[ 11.265037] usb 1-2.1: configuration #1 chosen from 1 choice
[ 11.275244] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.1/1-2.1:1.0/input/input3
[ 11.275280] generic-usb 0003:046D:C518.0001: input,hidraw0: USB HID v1.11
Mouse [Logitech USB Receiver] on usb-0000:00:12.2-2.1/input0
[ 11.280796] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.1/1-2.1:1.1/input/input4
[ 11.280842] generic-usb 0003:046D:C518.0002: input,hiddev96,hidraw1: USB
HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-2.1/input1
[ 11.530027] bttv0: tea5757: read timeout
[ 11.530028] bttv0: tuner type=5
[ 11.545289] All bytes are equal. It is not a TEA5767
[ 11.545319] tuner 0-0060: chip found @ 0xc0 (bt848 #0 [sw])
[ 11.548613] tuner-simple 0-0060: creating new instance
[ 11.548616] tuner-simple 0-0060: type set to 5 (Philips PAL_BG (FI1216 and
compatibles))
[ 11.560954] bttv0: audio absent, no audio device found!
[ 11.560985] bttv0: registered device video0
[ 11.560997] bttv0: registered device vbi0
[ 11.860360] reiser4: md2: found disk format 4.0.0.
[ 13.670978] reiser4: md3: found disk format 4.0.0.
[ 55.040308] reiser4: sdc7: found disk format 4.0.0.
[ 67.430760] Adding 7815612k swap on /dev/sda2. Priority:1 extents:1
across:7815612k
[ 67.446393] Adding 7815612k swap on /dev/sdb2. Priority:1 extents:1
across:7815612k
[ 67.469538] Adding 7815612k swap on /dev/sdc2. Priority:1 extents:1
across:7815612k
[ 68.044789] w83627ehf: Found W83627EHG chip at 0x290
[ 68.383049] r8169: eth1: link down
[ 68.405254] r8169: eth0: link up
[ 68.405264] r8169: eth0: link up
[ 71.210164] EMU10K1_Audigy 0000:05:08.0: PCI INT A -> GSI 23 (level, low) -
> IRQ 23
[ 71.217149] Audigy2 value: Special config.
[ 72.532724] fglrx: module license 'Proprietary. (C) 2002 - ATI
Technologies, Starnberg, GERMANY' taints kernel.
[ 72.532733] Disabling lock debugging due to kernel taint
[ 72.580553] [fglrx] Maximum main memory to use for locked dma buffers: 7749
MBytes.
[ 72.580833] [fglrx] vendor: 1002 device: 9501 count: 1
[ 72.581529] [fglrx] ioport: bar 4, base 0xb000, size: 0x100
[ 72.581552] pci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 72.581561] pci 0000:02:00.0: setting latency timer to 64
[ 72.582058] [fglrx] Kernel PAT support is enabled
[ 72.582095] [fglrx] module loaded - fglrx 8.66.1 [Aug 18 2009] with 1
minors
[ 72.754245] fglrx_pci 0000:02:00.0: irq 30 for MSI/MSI-X
[ 72.754717] [fglrx] Firegl kernel thread PID: 3773
[ 74.849325] [fglrx] Gart USWC size:1279 M.
[ 74.849328] [fglrx] Gart cacheable size:508 M.
[ 74.849331] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 74.849333] [fglrx] Reserved FB block: Unshared offset:fbff000, size:401000
[ 74.849334] [fglrx] Reserved FB block: Unshared offset:1fffc000, size:4000
[ 145.542137] reiser4[kopete(3948)]: disable_write_barrier
(fs/reiser4/wander.c:235)[zam-1055]:
[ 145.542139] NOTICE: md3 does not support write barriers, using synchronous
write instead.
lspci:
00:00.0 Host bridge: ATI Technologies Inc RX780/RX790 Chipset Host Bridge
Subsystem: ASRock Incorporation Device 5957
Flags: bus master, 66MHz, medium devsel, latency 0
Memory at <ignored> (64-bit, non-prefetchable)
Capabilities: [c4] HyperTransport: Slave or Primary Interface
Capabilities: [40] HyperTransport: Retry Mode
Capabilities: [54] HyperTransport: UnitID Clumping
Capabilities: [9c] HyperTransport: #1a
00:02.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (external
gfx0 port A) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot-), MSI 00
Capabilities: [a0] MSI: Mask- 64bit- Count=1/1 Enable+
Capabilities: [b0] Subsystem: ASRock Incorporation Device 5957
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information <?>
Capabilities: [110] Virtual Channel <?>
Kernel driver in use: pcieport-driver
00:09.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express
gpp port E) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: fe000000-febfffff
Prefetchable memory behind bridge: 00000000fa000000-00000000fcefffff
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot-), MSI 00
Capabilities: [a0] MSI: Mask- 64bit- Count=1/1 Enable+
Capabilities: [b0] Subsystem: ASRock Incorporation Device 5957
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information <?>
Capabilities: [110] Virtual Channel <?>
Kernel driver in use: pcieport-driver
00:0a.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express
gpp port F) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: 00000000cff00000-00000000cfffffff
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot-), MSI 00
Capabilities: [a0] MSI: Mask- 64bit- Count=1/1 Enable+
Capabilities: [b0] Subsystem: ASRock Incorporation Device 5957
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information <?>
Capabilities: [110] Virtual Channel <?>
Kernel driver in use: pcieport-driver
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller
[AHCI mode] (prog-if 01 [AHCI 1.0])
Subsystem: ASRock Incorporation Device 4391
Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 22
I/O ports at 9000 [size=8]
I/O ports at 8000 [size=4]
I/O ports at 7000 [size=8]
I/O ports at 6000 [size=4]
I/O ports at 5000 [size=16]
Memory at fddff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [60] Power Management version 2
Capabilities: [70] SATA HBA <?>
Kernel driver in use: ahci
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
(prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device 4397
Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 7
Memory at fddfe000 (32-bit, non-prefetchable) [size=4K]
Kernel modules: ohci-hcd
00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller (prog-
if 10 [OHCI])
Subsystem: ASRock Incorporation Device 4398
Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 7
Memory at fddfd000 (32-bit, non-prefetchable) [size=4K]
Kernel modules: ohci-hcd
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
(prog-if 20 [EHCI])
Subsystem: ASRock Incorporation Device 4396
Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 17
Memory at fddff000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
(prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device 4397
Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 10
Memory at fddfc000 (32-bit, non-prefetchable) [size=4K]
Kernel modules: ohci-hcd
00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller (prog-
if 10 [OHCI])
Subsystem: ASRock Incorporation Device 4398
Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 10
Memory at fddf7000 (32-bit, non-prefetchable) [size=4K]
Kernel modules: ohci-hcd
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
(prog-if 20 [EHCI])
Subsystem: ASRock Incorporation Device 4396
Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 19
Memory at fddf6800 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a)
Subsystem: ASRock Incorporation Device 4385
Flags: 66MHz, medium devsel
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
Kernel modules: i2c-piix4
00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller (prog-
if 8a [Master SecP PriP])
Subsystem: ASRock Incorporation Device 439c
Flags: bus master, 66MHz, medium devsel, latency 0
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at ff00 [size=16]
Capabilities: [70] MSI: Mask- 64bit- Count=1/1 Enable-
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
Subsystem: ASRock Incorporation Device 439d
Flags: bus master, 66MHz, medium devsel, latency 0
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (prog-if 01
[Subtractive decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=05, subordinate=05, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Prefetchable memory behind bridge: fcf00000-fcffffff
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller
(prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device 4399
Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 10
Memory at fddf5000 (32-bit, non-prefetchable) [size=4K]
Kernel modules: ohci-hcd
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] HyperTransport Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] Address Map
Flags: fast devsel
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] DRAM Controller
Flags: fast devsel
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] Miscellaneous Control
Flags: fast devsel
Capabilities: [f0] Secure device <?>
Kernel driver in use: k10temp
Kernel modules: k8temp
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] Link Control
Flags: fast devsel
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI
Express Gigabit Ethernet controller (rev 02)
Subsystem: ASRock Incorporation A770CrossFire motherboard
Flags: bus master, fast devsel, latency 0, IRQ 29
I/O ports at a800 [size=256]
Memory at cffff000 (64-bit, prefetchable) [size=4K]
Memory at cffe0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at fdef0000 [disabled] [size=64K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable- Mask- TabSize=2
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel <?>
Capabilities: [160] Device Serial Number 00-e0-4c-68-12-34-56-78
Kernel driver in use: r8169
Kernel modules: r8169
02:00.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3870 (prog-
if 00 [VGA controller])
Subsystem: Info-Tek Corp. Device 4070
Flags: bus master, fast devsel, latency 0, IRQ 30
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at fdff0000 (64-bit, non-prefetchable) [size=64K]
I/O ports at b000 [size=256]
Expansion ROM at fdfc0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] MSI: Mask- 64bit+ Count=1/1 Enable+
Capabilities: [100] Vendor Specific Information <?>
Kernel driver in use: fglrx_pci
Kernel modules: fglrx
02:00.1 Audio device: ATI Technologies Inc Radeon HD 3870 Audio device
Subsystem: Info-Tek Corp. Device aa18
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at fdfec000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] MSI: Mask- 64bit+ Count=1/1 Enable-
Capabilities: [100] Vendor Specific Information <?>
Kernel modules: snd-hda-intel
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI
Express Gigabit Ethernet controller (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express
Gigabit Ethernet controller
Flags: bus master, fast devsel, latency 0, IRQ 28
I/O ports at d800 [size=256]
Memory at febff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at febc0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Capabilities: [48] Vital Product Data
Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+
Capabilities: [60] Express Endpoint, MSI 00
Capabilities: [84] Vendor Specific Information <?>
Capabilities: [100] Advanced Error Reporting
Capabilities: [12c] Virtual Channel <?>
Capabilities: [148] Device Serial Number 68-81-ec-10-00-00-0d-36
Capabilities: [154] Power Budgeting <?>
Kernel driver in use: r8169
Kernel modules: r8169
05:06.0 Multimedia video controller: Brooktree Corporation Bt848 Video Capture
(rev 12)
Flags: bus master, medium devsel, latency 128, IRQ 21
Memory at fcfff000 (32-bit, prefetchable) [size=4K]
Kernel driver in use: bttv
Kernel modules: bttv
05:08.0 Multimedia audio controller: Creative Labs SB0400 Audigy2 Value
Subsystem: Creative Labs Device 1001
Flags: bus master, medium devsel, latency 128, IRQ 23
I/O ports at e800 [size=64]
Capabilities: [dc] Power Management version 2
Kernel driver in use: EMU10K1_Audigy
Kernel modules: snd-emu10k1
Glück Auf
Volker
View attachment "config-2.6.30.5r4" of type "text/plain" (53485 bytes)
Powered by blists - more mailing lists