| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <4A94085D02000078000119A5@vpn.id2.novell.com>
Date: Tue, 25 Aug 2009 14:50:53 +0100
From: "Jan Beulich" <JBeulich@...ell.com>
To: <mingo@...e.hu>, <tglx@...utronix.de>, <sam@...nborg.org>,
<hpa@...or.com>
Cc: <linux-kernel@...r.kernel.org>
Subject: [PATCH] x86: fix build with older binutils and consolidate
linker script (v2)
Impact: build fix
binutils prior to 2.17 can't deal with the currently possible situation
of a new segment following the per-CPU segment, but that new segment
being empty - objcopy misplaces the .bss (and perhaps also the .brk)
sections outside of any segment. However, the current ordering of
sections really just appears to be the effect of cumulative unrelated
changes; re-ordering things allows to easily guarantee that the segment
following the per-CPU one is non-empty, and at once eliminates the need
for the bogus data.init2 segment.
Once touching this code, also use the various data section helper
macros from include/asm-generic/vmlinux.lds.h.
Change from previous submission is an adjustment to fix !SMP builds.
Signed-off-by: Jan Beulich <jbeulich@...ell.com>
---
arch/x86/kernel/vmlinux.lds.S | 126 +++++++++++++++---------------------------
1 file changed, 47 insertions(+), 79 deletions(-)
--- linux-2.6.31-rc7/arch/x86/kernel/vmlinux.lds.S 2009-08-25 15:16:34.000000000 +0200
+++ 2.6.31-rc7-x86-link-order/arch/x86/kernel/vmlinux.lds.S 2009-08-25 15:36:42.000000000 +0200
@@ -46,11 +46,10 @@ PHDRS {
data PT_LOAD FLAGS(7); /* RWE */
#ifdef CONFIG_X86_64
user PT_LOAD FLAGS(7); /* RWE */
- data.init PT_LOAD FLAGS(7); /* RWE */
#ifdef CONFIG_SMP
percpu PT_LOAD FLAGS(7); /* RWE */
#endif
- data.init2 PT_LOAD FLAGS(7); /* RWE */
+ init PT_LOAD FLAGS(7); /* RWE */
#endif
note PT_NOTE FLAGS(0); /* ___ */
}
@@ -103,65 +102,43 @@ SECTIONS
__stop___ex_table = .;
} :text = 0x9090
- RODATA
+ RO_DATA(PAGE_SIZE)
/* Data */
- . = ALIGN(PAGE_SIZE);
.data : AT(ADDR(.data) - LOAD_OFFSET) {
/* Start of data section */
_sdata = .;
- DATA_DATA
- CONSTRUCTORS
- } :data
+
+ /* init_task */
+ INIT_TASK_DATA(THREAD_SIZE)
#ifdef CONFIG_X86_32
- /* 32 bit has nosave before _edata */
- . = ALIGN(PAGE_SIZE);
- .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
- __nosave_begin = .;
- *(.data.nosave)
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
- }
+ /* 32 bit has nosave before _edata */
+ NOSAVE_DATA
#endif
- . = ALIGN(PAGE_SIZE);
- .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
- *(.data.page_aligned)
+ PAGE_ALIGNED_DATA(PAGE_SIZE)
*(.data.idt)
- }
-#ifdef CONFIG_X86_32
- . = ALIGN(32);
-#else
- . = ALIGN(PAGE_SIZE);
- . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
-#endif
- .data.cacheline_aligned :
- AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
- *(.data.cacheline_aligned)
- }
+ CACHELINE_ALIGNED_DATA(CONFIG_X86_L1_CACHE_BYTES)
- /* rarely changed data like cpu maps */
-#ifdef CONFIG_X86_32
- . = ALIGN(32);
-#else
- . = ALIGN(CONFIG_X86_INTERNODE_CACHE_BYTES);
-#endif
- .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
- *(.data.read_mostly)
+ DATA_DATA
+ CONSTRUCTORS
+
+ /* rarely changed data like cpu maps */
+ READ_MOSTLY_DATA(CONFIG_X86_INTERNODE_CACHE_BYTES)
/* End of data section */
_edata = .;
- }
+ } :data
#ifdef CONFIG_X86_64
#define VSYSCALL_ADDR (-10*1024*1024)
-#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + \
- SIZEOF(.data.read_mostly) + 4095) & ~(4095))
-#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + \
- SIZEOF(.data.read_mostly) + 4095) & ~(4095))
+#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data) + SIZEOF(.data) + \
+ PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))
+#define VSYSCALL_VIRT_ADDR ((ADDR(.data) + SIZEOF(.data) + \
+ PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))
#define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR)
#define VLOAD(x) (ADDR(x) - VLOAD_OFFSET)
@@ -227,35 +204,29 @@ SECTIONS
#endif /* CONFIG_X86_64 */
- /* init_task */
- . = ALIGN(THREAD_SIZE);
- .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
- *(.data.init_task)
+ /* Init code and data - will be freed after init */
+ . = ALIGN(PAGE_SIZE);
+ .init.begin : AT(ADDR(.init.begin) - LOAD_OFFSET) {
+ __init_begin = .; /* paired with __init_end */
}
-#ifdef CONFIG_X86_64
- :data.init
-#endif
+#if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
/*
- * smp_locks might be freed after init
- * start/end must be page aligned
+ * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the
+ * output PHDR, so the next output section - .init.text - should
+ * start another segment - init.
*/
- . = ALIGN(PAGE_SIZE);
- .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
- __smp_locks = .;
- *(.smp_locks)
- __smp_locks_end = .;
- . = ALIGN(PAGE_SIZE);
- }
+ PERCPU_VADDR(0, :percpu)
+#endif
- /* Init code and data - will be freed after init */
- . = ALIGN(PAGE_SIZE);
.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
- __init_begin = .; /* paired with __init_end */
_sinittext = .;
INIT_TEXT
_einittext = .;
}
+#ifdef CONFIG_X86_64
+ :init
+#endif
.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
INIT_DATA
@@ -326,17 +297,7 @@ SECTIONS
}
#endif
-#if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
- /*
- * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the
- * output PHDR, so the next output section - __data_nosave - should
- * start another section data.init2. Also, pda should be at the head of
- * percpu area. Preallocate it and define the percpu offset symbol
- * so that it can be accessed as a percpu variable.
- */
- . = ALIGN(PAGE_SIZE);
- PERCPU_VADDR(0, :percpu)
-#else
+#if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP)
PERCPU(PAGE_SIZE)
#endif
@@ -347,15 +308,22 @@ SECTIONS
__init_end = .;
}
+ /*
+ * smp_locks might be freed after init
+ * start/end must be page aligned
+ */
+ . = ALIGN(PAGE_SIZE);
+ .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
+ __smp_locks = .;
+ *(.smp_locks)
+ __smp_locks_end = .;
+ . = ALIGN(PAGE_SIZE);
+ }
+
#ifdef CONFIG_X86_64
.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
- . = ALIGN(PAGE_SIZE);
- __nosave_begin = .;
- *(.data.nosave)
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
- } :data.init2
- /* use another section data.init2, see PERCPU_VADDR() above */
+ NOSAVE_DATA
+ }
#endif
/* BSS */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists