[ 0.000000] Linux version 2.6.30.5r4 (root@energy) (gcc version 4.4.1 (Gentoo 4.4.1 p1.0) ) #1 SMP Tue Aug 18 06:28:18 CEST 2009 [ 0.000000] Command line: root=/dev/md1 md=3,/dev/sda3,/dev/sdb3,/dev/sdc3 nmi_watchdog=0 mtrr_spare_reg_nr=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7eb0000 (usable) [ 0.000000] BIOS-e820: 00000000c7eb0000 - 00000000c7ec0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000c7ec0000 - 00000000c7ef0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000c7ef0000 - 00000000c7f00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000238000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x238000 max_arch_pfn = 0x100000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000238000000 aka 9088M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c8000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xc7eb0 max_arch_pfn = 0x100000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000c7eb0000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00c7e00000 page 2M [ 0.000000] 00c7e00000 - 00c7eb0000 page 4k [ 0.000000] kernel direct mapping tables up to c7eb0000 @ 10000-13000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000238000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] 0100000000 - 0200000000 page 1G [ 0.000000] 0200000000 - 0238000000 page 2M [ 0.000000] kernel direct mapping tables up to 238000000 @ 12000-14000 [ 0.000000] ACPI: RSDP 00000000000fa7c0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000c7eb0000 00040 (v01 050609 RSDT2000 20090506 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000c7eb0200 00084 (v02 A M I OEMFACP 12000601 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000c7eb0440 08512 (v01 AS140 AS140121 00000121 INTL 20051117) [ 0.000000] ACPI: FACS 00000000c7ec0000 00040 [ 0.000000] ACPI: APIC 00000000c7eb0390 0006C (v01 050609 APIC2000 20090506 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000c7eb0400 0003C (v01 050609 OEMMCFG 20090506 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000c7ec0040 00071 (v01 050609 OEMB2000 20090506 MSFT 00000097) [ 0.000000] ACPI: AAFT 00000000c7eb8960 00027 (v01 050609 OEMAAFT 20090506 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000c7eb8990 00038 (v01 050609 OEMHPET 20090506 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000c7eb89d0 0088C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0238000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001575998] TEXT DATA BSS ==> [0001000000 - 0001575998] [ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #4 [0001576000 - 0001576133] BRK ==> [0001576000 - 0001576133] [ 0.000000] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #6 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000] [ 0.000000] [ffffe20000000000-ffffe20007dfffff] PMD -> [ffff880028200000-ffff88002fffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00238000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000c7eb0 [ 0.000000] 0: 0x00100000 -> 0x00238000 [ 0.000000] On node 0 totalpages: 2096703 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3825 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 800488 pages, LIFO batch:31 [ 0.000000] Normal zone: 17472 pages used for memmap [ 0.000000] Normal zone: 1260480 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000c7eb0000 - 00000000c7ec0000 [ 0.000000] PM: Registered nosave memory: 00000000c7ec0000 - 00000000c7ef0000 [ 0.000000] PM: Registered nosave memory: 00000000c7ef0000 - 00000000c7f00000 [ 0.000000] PM: Registered nosave memory: 00000000c7f00000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c8000000 (gap: c7f00000:38000000) [ 0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 24 pages at ffff880028034000, static data 67808 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064793 [ 0.000000] Kernel command line: root=/dev/md1 md=3,/dev/sda3,/dev/sdb3,/dev/sdc3 nmi_watchdog=0 mtrr_spare_reg_nr=1 [ 0.000000] md: Will configure md3 (super-block) from /dev/sda3,/dev/sdb3,/dev/sdc3, below. [ 0.000000] Initializing CPU#0 [ 0.000000] NR_IRQS:384 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3199.396 MHz processor. [ 0.003333] Console: colour VGA+ 80x25 [ 0.003333] console [tty0] enabled [ 0.003333] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.003333] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003333] Checking aperture... [ 0.003333] No AGP bridge found [ 0.003333] Node 0: aperture @ 20000000 size 32 MB [ 0.003333] Aperture pointing to e820 RAM. Ignoring. [ 0.003333] Your BIOS doesn't leave a aperture memory hole [ 0.003333] Please enable the IOMMU option in the BIOS setup [ 0.003333] This costs you 64 MB of RAM [ 0.003333] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.003333] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.003333] Memory: 8172700k/9306112k available (3231k kernel code, 919300k absent, 213188k reserved, 1310k data, 348k init) [ 0.003333] hpet clockevent registered [ 0.003333] HPET: 4 timers in total, 1 timers will be used for per-cpu timer [ 0.003339] Calibrating delay loop (skipped), value calculated using timer frequency.. 6401.40 BogoMIPS (lpj=10664640) [ 0.003445] Mount-cache hash table entries: 256 [ 0.003565] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.003600] CPU: L2 Cache: 512K (64 bytes/line) [ 0.003635] tseg: 0000000000 [ 0.003640] CPU: Physical Processor ID: 0 [ 0.003673] CPU: Processor Core ID: 0 [ 0.003712] using C1E aware idle routine [ 0.003755] ACPI: Core revision 20090320 [ 0.016702] Setting APIC routing to flat [ 0.017042] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.050834] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02 [ 0.053332] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.003333] Initializing CPU#1 [ 0.003333] Calibrating delay using timer specific routine.. 6402.85 BogoMIPS (lpj=10666975) [ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.003333] CPU: L2 Cache: 512K (64 bytes/line) [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 1 [ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.144186] CPU1: AMD Phenom(tm) II X4 955 Processor stepping 02 [ 0.144501] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.146716] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.003333] Initializing CPU#2 [ 0.003333] Calibrating delay using timer specific routine.. 6402.85 BogoMIPS (lpj=10666969) [ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.003333] CPU: L2 Cache: 512K (64 bytes/line) [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 2 [ 0.003333] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.240889] CPU2: AMD Phenom(tm) II X4 955 Processor stepping 02 [ 0.241204] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.243382] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.003333] Initializing CPU#3 [ 0.003333] Calibrating delay using timer specific routine.. 6402.86 BogoMIPS (lpj=10666976) [ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.003333] CPU: L2 Cache: 512K (64 bytes/line) [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 3 [ 0.003333] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.337491] CPU3: AMD Phenom(tm) II X4 955 Processor stepping 02 [ 0.337806] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.340014] Brought up 4 CPUs [ 0.340048] Total of 4 processors activated (25609.97 BogoMIPS). [ 0.340318] net_namespace: 1400 bytes [ 0.340422] xor: automatically using best checksumming function: generic_sse [ 0.356667] generic_sse: 12784.800 MB/sec [ 0.356701] xor: using function: generic_sse (12784.800 MB/sec) [ 0.356755] Time: 1:11:08 Date: 08/27/09 [ 0.356837] NET: Registered protocol family 16 [ 0.357045] node 0 link 0: io port [1000, ffffff] [ 0.357048] TOM: 00000000c8000000 aka 3200M [ 0.357082] Fam 10h mmconf [e0000000, efffffff] [ 0.357084] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.357086] node 0 link 0: mmio [f0000000, ffffffff] [ 0.357088] node 0 link 0: mmio [a0000, bffff] [ 0.357089] node 0 link 0: mmio [c8000000, dfffffff] [ 0.357091] TOM2: 0000000238000000 aka 9088M [ 0.357125] bus: [00,07] on node 0 link 0 [ 0.357126] bus: 00 index 0 io port: [0, ffff] [ 0.357127] bus: 00 index 1 mmio: [f0000000, ffffffff] [ 0.357128] bus: 00 index 2 mmio: [a0000, bffff] [ 0.357129] bus: 00 index 3 mmio: [c8000000, dfffffff] [ 0.357131] bus: 00 index 4 mmio: [238000000, fcffffffff] [ 0.357137] ACPI: bus type pci registered [ 0.357241] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.357277] PCI: Not using MMCONFIG. [ 0.357310] PCI: Using configuration type 1 for base access [ 0.357345] PCI: Using configuration type 1 for extended access [ 0.358938] bio: create slab at 0 [ 0.359389] ACPI: EC: Look up EC in DSDT [ 0.367199] ACPI: Interpreter enabled [ 0.367234] ACPI: (supports S0 S1 S3 S4 S5) [ 0.367351] ACPI: Using IOAPIC for interrupt routing [ 0.367429] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.370599] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.375781] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.381489] ACPI: No dock devices found. [ 0.381718] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.381799] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff] [ 0.381845] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.381880] pci 0000:00:02.0: PME# disabled [ 0.381948] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.381983] pci 0000:00:09.0: PME# disabled [ 0.382532] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.382567] pci 0000:00:0a.0: PME# disabled [ 0.382645] pci 0000:00:11.0: reg 10 io port: [0x9000-0x9007] [ 0.382651] pci 0000:00:11.0: reg 14 io port: [0x8000-0x8003] [ 0.382657] pci 0000:00:11.0: reg 18 io port: [0x7000-0x7007] [ 0.382663] pci 0000:00:11.0: reg 1c io port: [0x6000-0x6003] [ 0.382668] pci 0000:00:11.0: reg 20 io port: [0x5000-0x500f] [ 0.382674] pci 0000:00:11.0: reg 24 32bit mmio: [0xfddff800-0xfddffbff] [ 0.382724] pci 0000:00:12.0: reg 10 32bit mmio: [0xfddfe000-0xfddfefff] [ 0.382775] pci 0000:00:12.1: reg 10 32bit mmio: [0xfddfd000-0xfddfdfff] [ 0.382843] pci 0000:00:12.2: reg 10 32bit mmio: [0xfddff000-0xfddff0ff] [ 0.382892] pci 0000:00:12.2: supports D1 D2 [ 0.382894] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.382930] pci 0000:00:12.2: PME# disabled [ 0.382992] pci 0000:00:13.0: reg 10 32bit mmio: [0xfddfc000-0xfddfcfff] [ 0.383043] pci 0000:00:13.1: reg 10 32bit mmio: [0xfddf7000-0xfddf7fff] [ 0.383111] pci 0000:00:13.2: reg 10 32bit mmio: [0xfddf6800-0xfddf68ff] [ 0.383161] pci 0000:00:13.2: supports D1 D2 [ 0.383162] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.383199] pci 0000:00:13.2: PME# disabled [ 0.383342] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] [ 0.383348] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] [ 0.383353] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.383359] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.383365] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f] [ 0.383490] pci 0000:00:14.5: reg 10 32bit mmio: [0xfddf5000-0xfddf5fff] [ 0.383624] pci 0000:02:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff] [ 0.383631] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdff0000-0xfdffffff] [ 0.383636] pci 0000:02:00.0: reg 20 io port: [0xb000-0xb0ff] [ 0.383643] pci 0000:02:00.0: reg 30 32bit mmio: [0xfdfc0000-0xfdfdffff] [ 0.383659] pci 0000:02:00.0: supports D1 D2 [ 0.383686] pci 0000:02:00.1: reg 10 64bit mmio: [0xfdfec000-0xfdfeffff] [ 0.383717] pci 0000:02:00.1: supports D1 D2 [ 0.383767] pci 0000:00:02.0: bridge io port: [0xb000-0xbfff] [ 0.383769] pci 0000:00:02.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff] [ 0.383772] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.383812] pci 0000:03:00.0: reg 10 io port: [0xd800-0xd8ff] [ 0.383828] pci 0000:03:00.0: reg 18 64bit mmio: [0xfebff000-0xfebfffff] [ 0.383844] pci 0000:03:00.0: reg 30 32bit mmio: [0xfebc0000-0xfebdffff] [ 0.383878] pci 0000:03:00.0: supports D1 D2 [ 0.383879] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.383916] pci 0000:03:00.0: PME# disabled [ 0.383999] pci 0000:00:09.0: bridge io port: [0xc000-0xdfff] [ 0.384001] pci 0000:00:09.0: bridge 32bit mmio: [0xfe000000-0xfebfffff] [ 0.384003] pci 0000:00:09.0: bridge 64bit mmio pref: [0xfa000000-0xfcefffff] [ 0.384035] pci 0000:01:00.0: reg 10 io port: [0xa800-0xa8ff] [ 0.384049] pci 0000:01:00.0: reg 18 64bit mmio: [0xcffff000-0xcfffffff] [ 0.384059] pci 0000:01:00.0: reg 20 64bit mmio: [0xcffe0000-0xcffeffff] [ 0.384065] pci 0000:01:00.0: reg 30 32bit mmio: [0xfdef0000-0xfdefffff] [ 0.384094] pci 0000:01:00.0: supports D1 D2 [ 0.384095] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.384132] pci 0000:01:00.0: PME# disabled [ 0.384219] pci 0000:00:0a.0: bridge io port: [0xa000-0xafff] [ 0.384221] pci 0000:00:0a.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.384223] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xcff00000-0xcfffffff] [ 0.384258] pci 0000:05:06.0: reg 10 32bit mmio: [0xfcfff000-0xfcffffff] [ 0.384338] pci 0000:05:08.0: reg 10 io port: [0xe800-0xe83f] [ 0.384395] pci 0000:05:08.0: supports D1 D2 [ 0.384437] pci 0000:00:14.4: transparent bridge [ 0.384474] pci 0000:00:14.4: bridge io port: [0xe000-0xefff] [ 0.384480] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfcf00000-0xfcffffff] [ 0.384492] pci_bus 0000:00: on NUMA node 0 [ 0.384496] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.384625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.384670] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 0.384715] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.384777] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT] [ 0.387594] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15) [ 0.387840] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15) [ 0.388083] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) [ 0.388326] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15) [ 0.388568] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.388857] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 12 14 15) [ 0.389100] ACPI: PCI Interrupt Link [LNKG] (IRQs *4 10 11 12 14 15) [ 0.389329] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 12 14 15) [ 0.389715] SCSI subsystem initialized [ 0.389800] libata version 3.00 loaded. [ 0.389869] usbcore: registered new interface driver usbfs [ 0.389925] usbcore: registered new interface driver hub [ 0.389988] usbcore: registered new device driver usb [ 0.446681] raid6: int64x1 2808 MB/s [ 0.503341] raid6: int64x2 3611 MB/s [ 0.560017] raid6: int64x4 2846 MB/s [ 0.616667] raid6: int64x8 2701 MB/s [ 0.673348] raid6: sse2x1 4157 MB/s [ 0.730004] raid6: sse2x2 7091 MB/s [ 0.786669] raid6: sse2x4 7848 MB/s [ 0.786702] raid6: using algorithm sse2x4 (7848 MB/s) [ 0.786786] PCI: Using ACPI for IRQ routing [ 0.786825] pci 0000:00:00.0: BAR 3: can't allocate resource [ 0.800198] PCI-DMA: Disabling AGP. [ 0.800313] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.800347] PCI-DMA: using GART IOMMU. [ 0.800382] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.802129] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0 [ 0.802238] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.806695] hpet: hpet2 irq 24 for MSI [ 0.813350] Switched to high resolution mode on CPU 0 [ 0.814492] Switched to high resolution mode on CPU 3 [ 0.814519] Switched to high resolution mode on CPU 1 [ 0.814556] Switched to high resolution mode on CPU 2 [ 0.826700] pnp: PnP ACPI init [ 0.826753] ACPI: bus type pnp registered [ 0.829222] pnp 00:0b: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.829277] pnp 00:0b: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.829332] pnp 00:0b: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.829387] pnp 00:0b: mem resource (0x100000-0xc7efffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.829741] pnp: PnP ACPI: found 12 devices [ 0.829775] ACPI: ACPI bus type pnp unregistered [ 0.829816] system 00:06: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.829869] system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.829907] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.829942] system 00:07: ioport range 0x40b-0x40b has been reserved [ 0.829977] system 00:07: ioport range 0x4d6-0x4d6 has been reserved [ 0.830018] system 00:07: ioport range 0xc00-0xc01 has been reserved [ 0.830053] system 00:07: ioport range 0xc14-0xc14 has been reserved [ 0.830088] system 00:07: ioport range 0xc50-0xc51 has been reserved [ 0.830123] system 00:07: ioport range 0xc52-0xc52 has been reserved [ 0.830158] system 00:07: ioport range 0xc6c-0xc6c has been reserved [ 0.830192] system 00:07: ioport range 0xc6f-0xc6f has been reserved [ 0.830227] system 00:07: ioport range 0xcd0-0xcd1 has been reserved [ 0.830262] system 00:07: ioport range 0xcd2-0xcd3 has been reserved [ 0.830297] system 00:07: ioport range 0xcd4-0xcd5 has been reserved [ 0.830331] system 00:07: ioport range 0xcd6-0xcd7 has been reserved [ 0.830366] system 00:07: ioport range 0xcd8-0xcdf has been reserved [ 0.830401] system 00:07: ioport range 0x800-0x89f has been reserved [ 0.830436] system 00:07: ioport range 0xb00-0xb0f has been reserved [ 0.830471] system 00:07: ioport range 0xb20-0xb3f has been reserved [ 0.830505] system 00:07: ioport range 0x900-0x90f has been reserved [ 0.830540] system 00:07: ioport range 0x910-0x91f has been reserved [ 0.830575] system 00:07: ioport range 0xfe00-0xfefe has been reserved [ 0.830610] system 00:07: iomem range 0xffb80000-0xffbfffff has been reserved [ 0.830645] system 00:07: iomem range 0xfec10000-0xfec1001f has been reserved [ 0.830682] system 00:09: ioport range 0x290-0x29f has been reserved [ 0.830718] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved [ 0.830755] system 00:0b: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.835661] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02 [ 0.835696] pci 0000:00:02.0: IO window: 0xb000-0xbfff [ 0.835732] pci 0000:00:02.0: MEM window: 0xfdf00000-0xfdffffff [ 0.835768] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.835823] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03 [ 0.835857] pci 0000:00:09.0: IO window: 0xc000-0xdfff [ 0.835893] pci 0000:00:09.0: MEM window: 0xfe000000-0xfebfffff [ 0.835928] pci 0000:00:09.0: PREFETCH window: 0x000000fa000000-0x000000fcefffff [ 0.835982] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:01 [ 0.836017] pci 0000:00:0a.0: IO window: 0xa000-0xafff [ 0.836052] pci 0000:00:0a.0: MEM window: 0xfde00000-0xfdefffff [ 0.836088] pci 0000:00:0a.0: PREFETCH window: 0x000000cff00000-0x000000cfffffff [ 0.836142] pci 0000:00:14.4: PCI bridge, secondary bus 0000:05 [ 0.836178] pci 0000:00:14.4: IO window: 0xe000-0xefff [ 0.836215] pci 0000:00:14.4: MEM window: disabled [ 0.836251] pci 0000:00:14.4: PREFETCH window: 0x000000fcf00000-0x000000fcffffff [ 0.836315] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.836351] pci 0000:00:02.0: setting latency timer to 64 [ 0.836357] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.836392] pci 0000:00:09.0: setting latency timer to 64 [ 0.836396] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.836431] pci 0000:00:0a.0: setting latency timer to 64 [ 0.836438] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.836439] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.836441] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff] [ 0.836442] pci_bus 0000:02: resource 1 mem: [0xfdf00000-0xfdffffff] [ 0.836444] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.836445] pci_bus 0000:03: resource 0 io: [0xc000-0xdfff] [ 0.836447] pci_bus 0000:03: resource 1 mem: [0xfe000000-0xfebfffff] [ 0.836448] pci_bus 0000:03: resource 2 pref mem [0xfa000000-0xfcefffff] [ 0.836449] pci_bus 0000:01: resource 0 io: [0xa000-0xafff] [ 0.836451] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.836452] pci_bus 0000:01: resource 2 pref mem [0xcff00000-0xcfffffff] [ 0.836454] pci_bus 0000:05: resource 0 io: [0xe000-0xefff] [ 0.836455] pci_bus 0000:05: resource 2 pref mem [0xfcf00000-0xfcffffff] [ 0.836456] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.836457] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.836508] NET: Registered protocol family 2 [ 0.873408] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.873922] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.874916] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.875314] TCP: Hash tables configured (established 262144 bind 65536) [ 0.875350] TCP reno registered [ 0.883431] NET: Registered protocol family 1 [ 0.885125] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.885268] Loading Reiser4. See www.namesys.com for a description of Reiser4. [ 0.885408] msgmni has been set to 15964 [ 0.885675] alg: No test for stdrng (krng) [ 0.885715] async_tx: api initialized (sync-only) [ 0.885794] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.885848] io scheduler noop registered [ 0.885892] io scheduler cfq registered (default) [ 0.886016] pci 0000:02:00.0: Boot video device [ 0.886115] pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X [ 0.886122] pcieport-driver 0000:00:02.0: setting latency timer to 64 [ 0.886214] pcieport-driver 0000:00:09.0: irq 26 for MSI/MSI-X [ 0.886220] pcieport-driver 0000:00:09.0: setting latency timer to 64 [ 0.886308] pcieport-driver 0000:00:0a.0: irq 27 for MSI/MSI-X [ 0.886315] pcieport-driver 0000:00:0a.0: setting latency timer to 64 [ 0.886532] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.886585] ACPI: Power Button [PWRF] [ 0.886677] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.886730] ACPI: Power Button [PWRB] [ 0.886873] processor ACPI_CPU:00: registered as cooling_device0 [ 0.886908] ACPI: Processor [P001] (supports 8 throttling states) [ 0.887004] processor ACPI_CPU:01: registered as cooling_device1 [ 0.887074] processor ACPI_CPU:02: registered as cooling_device2 [ 0.887145] processor ACPI_CPU:03: registered as cooling_device3 [ 0.890974] Linux agpgart interface v0.103 [ 0.891098] Driver 'sd' needs updating - please use bus_type methods [ 0.891182] ahci 0000:00:11.0: version 3.0 [ 0.891194] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.891338] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.891392] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 0.891907] scsi0 : ahci [ 0.892044] scsi1 : ahci [ 0.892134] scsi2 : ahci [ 0.892222] scsi3 : ahci [ 0.892313] scsi4 : ahci [ 0.892400] scsi5 : ahci [ 0.892527] ata1: SATA max UDMA/133 irq_stat 0x00400000 irq 22, PHY RDY changed [ 0.892582] ata2: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddff980 irq 22 [ 0.892636] ata3: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffa00 irq 22 [ 0.892691] ata4: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffa80 irq 22 [ 0.892745] ata5: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffb00 irq 22 [ 0.892799] ata6: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffb80 irq 22 [ 0.893030] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.893067] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.893532] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.893598] mice: PS/2 mouse device common for all mice [ 0.893731] rtc_cmos 00:02: RTC can wake from S4 [ 0.893805] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.893861] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.893914] md: raid1 personality registered for level 1 [ 0.893948] md: raid6 personality registered for level 6 [ 0.893983] md: raid5 personality registered for level 5 [ 0.894017] md: raid4 personality registered for level 4 [ 0.894124] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 0.894217] cpuidle: using governor ladder [ 0.894335] usbcore: registered new interface driver hiddev [ 0.894389] usbcore: registered new interface driver usbhid [ 0.894424] usbhid: v2.6:USB HID core driver [ 0.894497] TCP cubic registered [ 0.894531] NET: Registered protocol family 17 [ 0.894592] powernow-k8: Found 1 AMD Phenom(tm) II X4 955 Processor processors (4 cpu cores) (version 2.20.00) [ 0.895174] powernow-k8: 0 : pstate 0 (3200 MHz) [ 0.895210] powernow-k8: 1 : pstate 1 (2500 MHz) [ 0.895244] powernow-k8: 2 : pstate 2 (2100 MHz) [ 0.895278] powernow-k8: 3 : pstate 3 (800 MHz) [ 0.895659] PM: Resume from disk failed. [ 0.895752] Magic number: 5:759:155 [ 0.895802] acpi device:22: hash matches [ 0.918908] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.210866] ata5: SATA link down (SStatus 0 SControl 300) [ 1.210927] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.210985] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.211037] ata6: SATA link down (SStatus 0 SControl 300) [ 1.211091] ata3: SATA link down (SStatus 0 SControl 300) [ 1.217280] ata4.00: ATA-7: SAMSUNG HD753LJ, 1AA01113, max UDMA7 [ 1.217321] ata4.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.217367] ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01110, max UDMA7 [ 1.217402] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.223776] ata4.00: configured for UDMA/133 [ 1.223829] ata2.00: configured for UDMA/133 [ 1.610867] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.617221] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01109, max UDMA7 [ 1.617257] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.623677] ata1.00: configured for UDMA/133 [ 1.637999] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5 [ 1.638214] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.638266] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 1.638333] sd 0:0:0:0: [sda] Write Protect is off [ 1.638350] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5 [ 1.638421] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.638433] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.638475] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 1.638482] sd 1:0:0:0: [sdb] Write Protect is off [ 1.638484] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.638486] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.638493] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.638536] sdb:<5>scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5 [ 1.638695] sd 3:0:0:0: [sdc] 1465149168 512-byte hardware sectors: (750 GB/698 GiB) [ 1.638702] sd 3:0:0:0: [sdc] Write Protect is off [ 1.638704] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.638712] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.638755] sdc:<5>sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 1.638933] sda: sda1 sda2 sda3 sda4 < sdc1 sdc2 sdc3 sdc4 < sdb1 sdb2 sdb3 sdb4 < sda5 sdc5 sda6 > [ 1.660539] sdb5<5>sd 0:0:0:0: [sda] Attached SCSI disk [ 1.661819] sdc6 sdb6 > [ 1.672095] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.675012] sdc7 > [ 1.675339] sd 3:0:0:0: [sdc] Attached SCSI disk [ 1.675382] md: Waiting for all devices to be available before autodetect [ 1.675416] md: If you don't use raid, use raid=noautodetect [ 1.675516] md: Autodetecting RAID arrays. [ 1.773512] md: Scanned 12 and added 12 devices. [ 1.773547] md: autorun ... [ 1.773581] md: considering sdc6 ... [ 1.773620] md: adding sdc6 ... [ 1.773654] md: sdc5 has different UUID to sdc6 [ 1.773688] md: sdc3 has different UUID to sdc6 [ 1.773723] md: sdc1 has different UUID to sdc6 [ 1.773758] md: adding sdb6 ... [ 1.773792] md: sdb5 has different UUID to sdc6 [ 1.773826] md: sdb3 has different UUID to sdc6 [ 1.773861] md: sdb1 has different UUID to sdc6 [ 1.773896] md: adding sda6 ... [ 1.773930] md: sda5 has different UUID to sdc6 [ 1.773965] md: sda3 has different UUID to sdc6 [ 1.773999] md: sda1 has different UUID to sdc6 [ 1.774117] md: created md3 [ 1.774151] md: bind [ 1.774188] md: bind [ 1.774225] md: bind [ 1.774261] md: running: [ 1.774392] raid5: device sdc6 operational as raid disk 2 [ 1.774426] raid5: device sdb6 operational as raid disk 1 [ 1.774460] raid5: device sda6 operational as raid disk 0 [ 1.774655] raid5: allocated 3220kB for md3 [ 1.774703] raid5: raid level 5 set md3 active with 3 out of 3 devices, algorithm 2 [ 1.774756] RAID5 conf printout: [ 1.774789] --- rd:3 wd:3 [ 1.774823] disk 0, o:1, dev:sda6 [ 1.774856] disk 1, o:1, dev:sdb6 [ 1.774890] disk 2, o:1, dev:sdc6 [ 1.774953] md: considering sdc5 ... [ 1.774989] md: adding sdc5 ... [ 1.775023] md: sdc3 has different UUID to sdc5 [ 1.775058] md: sdc1 has different UUID to sdc5 [ 1.775093] md: adding sdb5 ... [ 1.775127] md: sdb3 has different UUID to sdc5 [ 1.775162] md: sdb1 has different UUID to sdc5 [ 1.775197] md: adding sda5 ... [ 1.775231] md: sda3 has different UUID to sdc5 [ 1.775265] md: sda1 has different UUID to sdc5 [ 1.775356] md: created md2 [ 1.775389] md: bind [ 1.775426] md: bind [ 1.775463] md: bind [ 1.775499] md: running: [ 1.775629] raid5: device sdc5 operational as raid disk 2 [ 1.775663] raid5: device sdb5 operational as raid disk 1 [ 1.775697] raid5: device sda5 operational as raid disk 0 [ 1.775886] raid5: allocated 3220kB for md2 [ 1.775932] raid5: raid level 5 set md2 active with 3 out of 3 devices, algorithm 2 [ 1.775985] RAID5 conf printout: [ 1.776018] --- rd:3 wd:3 [ 1.776051] disk 0, o:1, dev:sda5 [ 1.776084] disk 1, o:1, dev:sdb5 [ 1.776118] disk 2, o:1, dev:sdc5 [ 1.776180] md: considering sdc3 ... [ 1.776216] md: adding sdc3 ... [ 1.776250] md: sdc1 has different UUID to sdc3 [ 1.776285] md: adding sdb3 ... [ 1.776319] md: sdb1 has different UUID to sdc3 [ 1.776354] md: adding sda3 ... [ 1.776388] md: sda1 has different UUID to sdc3 [ 1.776480] md: created md1 [ 1.776513] md: bind [ 1.776551] md: bind [ 1.776588] md: bind [ 1.776624] md: running: [ 1.776755] raid5: device sdc3 operational as raid disk 2 [ 1.776790] raid5: device sdb3 operational as raid disk 1 [ 1.776824] raid5: device sda3 operational as raid disk 0 [ 1.777017] raid5: allocated 3220kB for md1 [ 1.777064] raid5: raid level 5 set md1 active with 3 out of 3 devices, algorithm 2 [ 1.777116] RAID5 conf printout: [ 1.777150] --- rd:3 wd:3 [ 1.777183] disk 0, o:1, dev:sda3 [ 1.777216] disk 1, o:1, dev:sdb3 [ 1.777250] disk 2, o:1, dev:sdc3 [ 1.777313] md: considering sdc1 ... [ 1.777351] md: adding sdc1 ... [ 1.777386] md: adding sdb1 ... [ 1.777421] md: adding sda1 ... [ 1.777454] md: created md0 [ 1.777487] md: bind [ 1.777524] md: bind [ 1.777560] md: bind [ 1.777597] md: running: [ 1.777755] raid1: raid set md0 active with 3 out of 3 mirrors [ 1.777816] md: ... autorun DONE. [ 1.777867] md: Loading md3: /dev/sda3 [ 1.777906] md3: unknown partition table [ 1.778067] md: couldn't update array info. -22 [ 1.778104] md: could not bd_claim sda3. [ 1.778138] md: md_import_device returned -16 [ 1.778174] md: could not bd_claim sdb3. [ 1.778207] md: md_import_device returned -16 [ 1.778243] md: could not bd_claim sdc3. [ 1.778276] md: md_import_device returned -16 [ 1.778311] md: starting md3 failed [ 1.778386] md1: unknown partition table [ 1.815947] reiser4: md1: found disk format 4.0.0. [ 5.835444] VFS: Mounted root (reiser4 filesystem) readonly on device 9:1. [ 5.835495] Freeing unused kernel memory: 348k freed [ 8.831192] udev: starting version 145 [ 8.956611] md0:<6> md2: unknown partition table [ 8.992687] unknown partition table [ 9.615011] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 9.615028] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 9.615042] r8169 0000:03:00.0: setting latency timer to 64 [ 9.615310] r8169 0000:03:00.0: irq 28 for MSI/MSI-X [ 9.615384] eth0: RTL8168b/8111b at 0xffffc20012dec000, 00:e0:45:46:00:29, XID 38000000 IRQ 28 [ 9.616772] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 9.616780] r8169 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 9.616788] r8169 0000:01:00.0: setting latency timer to 64 [ 9.616840] r8169 0000:01:00.0: irq 29 for MSI/MSI-X [ 9.616887] eth1: RTL8168c/8111c at 0xffffc2000006a000, 00:19:66:86:ce:12, XID 3c4000c0 IRQ 29 [ 9.620294] udev: renamed network interface eth1 to eth0 [ 9.641911] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 9.641933] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 9.641970] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 9.642198] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 9.642222] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 9.642238] ehci_hcd 0000:00:12.2: debug port 1 [ 9.642255] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfddff000 [ 9.651263] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 9.651288] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 9.651290] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.651291] usb usb1: Product: EHCI Host Controller [ 9.651292] usb usb1: Manufacturer: Linux 2.6.30.5r4 ehci_hcd [ 9.651293] usb usb1: SerialNumber: 0000:00:12.2 [ 9.651638] usb usb1: configuration #1 chosen from 1 choice [ 9.651679] hub 1-0:1.0: USB hub found [ 9.651685] hub 1-0:1.0: 6 ports detected [ 9.651813] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 9.651834] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 9.651994] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 9.652012] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 9.652028] ehci_hcd 0000:00:13.2: debug port 1 [ 9.652041] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfddf6800 [ 9.661263] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 9.661274] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 9.661275] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.661276] usb usb2: Product: EHCI Host Controller [ 9.661277] usb usb2: Manufacturer: Linux 2.6.30.5r4 ehci_hcd [ 9.661278] usb usb2: SerialNumber: 0000:00:13.2 [ 9.661346] usb usb2: configuration #1 chosen from 1 choice [ 9.661374] hub 2-0:1.0: USB hub found [ 9.661378] hub 2-0:1.0: 6 ports detected [ 9.670316] udev: renamed network interface _rename to eth1 [ 9.691307] Linux video capture interface: v2.00 [ 9.699465] bttv: driver version 0.9.18 loaded [ 9.699467] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 9.699515] bttv: Bt8xx card found (0). [ 9.699527] bttv 0000:05:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 9.699537] bttv0: Bt848 (rev 18) at 0000:05:06.0, irq: 21, latency: 128, mmio: 0xfcfff000 [ 9.699567] bttv0: using: Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar [card=25,insmod option] [ 9.699569] IRQ 21/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs [ 9.699603] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] [ 9.957103] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 10.082077] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 [ 10.082079] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 10.082081] usb 1-2: Product: USB2.0 Hub [ 10.082130] usb 1-2: configuration #1 chosen from 1 choice [ 10.082560] hub 1-2:1.0: USB hub found [ 10.082825] hub 1-2:1.0: 4 ports detected [ 10.351118] usb 1-2.2: new low speed USB device using ehci_hcd and address 3 [ 10.440497] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c518 [ 10.440499] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 10.440501] usb 1-2.2: Product: USB Receiver [ 10.440502] usb 1-2.2: Manufacturer: Logitech [ 10.440535] usb 1-2.2: configuration #1 chosen from 1 choice [ 10.450750] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.0/input/input3 [ 10.450789] generic-usb 0003:046D:C518.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.2-2.2/input0 [ 10.455931] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.1/input/input4 [ 10.455981] generic-usb 0003:046D:C518.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-2.2/input1 [ 10.700030] bttv0: tea5757: read timeout [ 10.700032] bttv0: tuner type=5 [ 10.711868] All bytes are equal. It is not a TEA5767 [ 10.711899] tuner 0-0060: chip found @ 0xc0 (bt848 #0 [sw]) [ 10.714766] tuner-simple 0-0060: creating new instance [ 10.714768] tuner-simple 0-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) [ 10.727127] bttv0: audio absent, no audio device found! [ 10.727193] bttv0: registered device video0 [ 10.727219] bttv0: registered device vbi0 [ 11.006704] reiser4: md2: found disk format 4.0.0. [ 12.788508] reiser4: md3: found disk format 4.0.0. [ 54.187328] reiser4: sdc7: found disk format 4.0.0. [ 66.507842] Adding 7815612k swap on /dev/sda2. Priority:1 extents:1 across:7815612k [ 66.514717] Adding 7815612k swap on /dev/sdb2. Priority:1 extents:1 across:7815612k [ 66.584800] Adding 7815612k swap on /dev/sdc2. Priority:1 extents:1 across:7815612k [ 67.187645] w83627ehf: Found W83627EHG chip at 0x290 [ 67.569061] r8169: eth0: link up [ 67.569070] r8169: eth0: link up [ 67.573771] r8169: eth1: link down [ 70.343374] EMU10K1_Audigy 0000:05:08.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 70.350367] Audigy2 value: Special config. [ 71.704750] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 71.704759] Disabling lock debugging due to kernel taint [ 71.752696] [fglrx] Maximum main memory to use for locked dma buffers: 7749 MBytes. [ 71.752961] [fglrx] vendor: 1002 device: 9501 count: 1 [ 71.753615] [fglrx] ioport: bar 4, base 0xb000, size: 0x100 [ 71.753637] pci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 71.753646] pci 0000:02:00.0: setting latency timer to 64 [ 71.754126] [fglrx] Kernel PAT support is enabled [ 71.754163] [fglrx] module loaded - fglrx 8.66.2 [Aug 25 2009] with 1 minors [ 71.953696] fglrx_pci 0000:02:00.0: irq 30 for MSI/MSI-X [ 71.954048] [fglrx] Firegl kernel thread PID: 3883 [ 74.083532] [fglrx] Gart USWC size:1279 M. [ 74.083534] [fglrx] Gart cacheable size:508 M. [ 74.083538] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 74.083540] [fglrx] Reserved FB block: Unshared offset:fbff000, size:401000 [ 74.083541] [fglrx] Reserved FB block: Unshared offset:1fffc000, size:4000 [ 611.862435] reiser4[ktxnmgrd:md1:ru(537)]: disable_write_barrier (fs/reiser4/wander.c:235)[zam-1055]: [ 611.862436] NOTICE: md1 does not support write barriers, using synchronous write instead. [ 670.057754] reiser4[pickup(3743)]: disable_write_barrier (fs/reiser4/wander.c:235)[zam-1055]: [ 670.057755] NOTICE: md2 does not support write barriers, using synchronous write instead. [ 692.937317] reiser4[ktxnmgrd:md3:ru(2705)]: disable_write_barrier (fs/reiser4/wander.c:235)[zam-1055]: [ 692.937318] NOTICE: md3 does not support write barriers, using synchronous write instead. [ 6000.574616] usb 1-2.2: reset low speed USB device using ehci_hcd and address 3