[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-rc7 (tim@moka) (gcc version 4.4.1 (Ubuntu 4.4.1-1ubuntu1~jaunty1) ) #15 SMP PREEMPT Thu Aug 27 11:40:45 CEST 2009 [ 0.000000] Command line: root=UUID=f4e801b1-b54a-4002-a3e3-328308ad48fb ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4c00 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf680000 (usable) [ 0.000000] BIOS-e820: 00000000bf680000 - 00000000bf698000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf698000 - 00000000bf6dc000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf6dc000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000340000000 (usable) [ 0.000000] DMI 2.5 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x340000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E3FFF write-protect [ 0.000000] E4000-EBFFF write-through [ 0.000000] EC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask F00000000 write-back [ 0.000000] 2 base 300000000 mask FC0000000 write-back [ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 4 base 0BF700000 mask FFFF00000 uncachable [ 0.000000] 5 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] e820 update range: 00000000bf700000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbf680 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e4c00 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bf680000 (usable) [ 0.000000] modified: 00000000bf680000 - 00000000bf698000 (ACPI data) [ 0.000000] modified: 00000000bf698000 - 00000000bf6dc000 (ACPI NVS) [ 0.000000] modified: 00000000bf6dc000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000340000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf680000 [ 0.000000] 0000000000 - 00bf600000 page 2M [ 0.000000] 00bf600000 - 00bf680000 page 4k [ 0.000000] kernel direct mapping tables up to bf680000 @ 10000-15000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000340000000 [ 0.000000] 0100000000 - 0340000000 page 2M [ 0.000000] kernel direct mapping tables up to 340000000 @ 13000-21000 [ 0.000000] RAMDISK: 3783b000 - 37fef5b1 [ 0.000000] ACPI: RSDP 00000000000fabd0 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000bf680100 0005C (v01 022609 XSDT1156 20090226 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bf680290 000F4 (v03 022609 FACP1156 20090226 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bf6804b0 0C3DD (v01 A1146 A1146001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS 00000000bf698000 00040 [ 0.000000] ACPI: APIC 00000000bf680390 000D8 (v01 022609 APIC1156 20090226 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bf680470 0003C (v01 022609 OEMMCFG 20090226 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bf698040 00072 (v01 022609 OEMB1156 20090226 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000bf68f4b0 00038 (v01 022609 OEMHPET 20090226 MSFT 00000097) [ 0.000000] ACPI: OSFR 00000000bf68f4f0 000B0 (v01 022609 OEMOSFR 20090226 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000bf69a8f0 0249F (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0340000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0002171520] TEXT DATA BSS ==> [0001000000 - 0002171520] [ 0.000000] #3 [003783b000 - 0037fef5b1] RAMDISK ==> [003783b000 - 0037fef5b1] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0002172000 - 0002172288] BRK ==> [0002172000 - 0002172288] [ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] [ 0.000000] #7 [0000013000 - 000001c000] PGTABLE ==> [0000013000 - 000001c000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff880028600000-ffff8800377fffff] on node 0 [ 0.000000] [ffffea0010800000-ffffea0011dfffff] PMD -> [ffff880038000000-ffff8800395fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00340000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bf680 [ 0.000000] 0: 0x00100000 -> 0x00340000 [ 0.000000] On node 0 totalpages: 3143183 [ 0.000000] DMA zone: 88 pages used for memmap [ 0.000000] DMA zone: 111 pages reserved [ 0.000000] DMA zone: 3784 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 22440 pages used for memmap [ 0.000000] DMA32 zone: 757464 pages, LIFO batch:31 [ 0.000000] Normal zone: 50688 pages used for memmap [ 0.000000] Normal zone: 2308608 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] 16 Processors exceeds NR_CPUS limit of 8 [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 48 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000 [ 0.000000] PM: Registered nosave memory: 00000000000e5000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bf680000 - 00000000bf698000 [ 0.000000] PM: Registered nosave memory: 00000000bf698000 - 00000000bf6dc000 [ 0.000000] PM: Registered nosave memory: 00000000bf6dc000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages at ffff880028084000, static data 87684 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3069856 [ 0.000000] Kernel command line: root=UUID=f4e801b1-b54a-4002-a3e3-328308ad48fb ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 12183548k/13631488k available (5211k kernel code, 1058756k absent, 388196k reserved, 2999k data, 516k init) [ 0.000000] Preemptible RCU implementation. [ 0.000000] NR_IRQS:512 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2672.356 MHz processor. [ 0.001522] Console: colour VGA+ 80x25 [ 0.001534] console [tty0] enabled [ 0.001558] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001560] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001561] ... MAX_LOCK_DEPTH: 48 [ 0.001562] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001563] ... CLASSHASH_SIZE: 4096 [ 0.001564] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.001566] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.001567] ... CHAINHASH_SIZE: 16384 [ 0.001568] memory used by lock dependency info: 5695 kB [ 0.001569] per task-struct memory footprint: 1920 bytes [ 0.019774] allocated 125829120 bytes of page_cgroup [ 0.019776] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.019979] hpet clockevent registered [ 0.019983] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.019994] Calibrating delay loop (skipped), value calculated using timer frequency.. 5344.71 BogoMIPS (lpj=2672356) [ 0.020115] Security Framework initialized [ 0.020118] SELinux: Disabled at boot. [ 0.020168] Mount-cache hash table entries: 256 [ 0.021093] Initializing cgroup subsys ns [ 0.021096] Initializing cgroup subsys cpuacct [ 0.021101] Initializing cgroup subsys memory [ 0.021136] Initializing cgroup subsys freezer [ 0.021153] CPU: Physical Processor ID: 0 [ 0.021154] CPU: Processor Core ID: 0 [ 0.021157] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.021159] CPU: L2 cache: 256K [ 0.021160] CPU: L3 cache: 8192K [ 0.021163] using mwait in idle threads. [ 0.021164] Performance Counters: Nehalem/Corei7 events, Intel PMU driver. [ 0.021173] ... version: 3 [ 0.021174] ... bit width: 48 [ 0.021175] ... generic counters: 4 [ 0.021177] ... value mask: 0000ffffffffffff [ 0.021178] ... max period: 000000007fffffff [ 0.021179] ... fixed-purpose counters: 3 [ 0.021180] ... counter mask: 000000070000000f [ 0.022006] ACPI: Core revision 20090521 [ 0.060489] Setting APIC routing to flat [ 0.060970] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.070973] CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 [ 0.193926] APIC calibration not consistent with PM-Timer: 120ms instead of 100ms [ 0.193929] APIC delta adjusted to PM-Timer: 835225 (1010608) [ 0.197006] lockdep: fixing up alternatives. [ 0.197129] Booting processor 1 APIC 0x2 ip 0x6000 [ 0.207389] Initializing CPU#1 [ 0.267907] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672338) [ 0.267913] CPU: Physical Processor ID: 0 [ 0.267914] CPU: Processor Core ID: 1 [ 0.267916] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.267917] CPU: L2 cache: 256K [ 0.267918] CPU: L3 cache: 8192K [ 0.268364] CPU1: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 [ 0.268372] Skipping synchronization checks as TSC is reliable. [ 0.268930] lockdep: fixing up alternatives. [ 0.268955] Booting processor 2 APIC 0x4 ip 0x6000 [ 0.279213] Initializing CPU#2 [ 0.339876] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672339) [ 0.339882] CPU: Physical Processor ID: 0 [ 0.339883] CPU: Processor Core ID: 2 [ 0.339885] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.339886] CPU: L2 cache: 256K [ 0.339887] CPU: L3 cache: 8192K [ 0.340374] CPU2: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 [ 0.340381] Skipping synchronization checks as TSC is reliable. [ 0.340896] lockdep: fixing up alternatives. [ 0.340925] Booting processor 3 APIC 0x6 ip 0x6000 [ 0.351182] Initializing CPU#3 [ 0.412845] Calibrating delay using timer specific routine.. 5451.57 BogoMIPS (lpj=2725788) [ 0.412853] CPU: Physical Processor ID: 0 [ 0.412854] CPU: Processor Core ID: 3 [ 0.412857] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.412858] CPU: L2 cache: 256K [ 0.412859] CPU: L3 cache: 8192K [ 0.413351] CPU3: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 [ 0.413359] Skipping synchronization checks as TSC is reliable. [ 0.413864] lockdep: fixing up alternatives. [ 0.413892] Booting processor 4 APIC 0x1 ip 0x6000 [ 0.424150] Initializing CPU#4 [ 0.484813] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672339) [ 0.484821] CPU: Physical Processor ID: 0 [ 0.484823] CPU: Processor Core ID: 0 [ 0.484826] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.484828] CPU: L2 cache: 256K [ 0.484829] CPU: L3 cache: 8192K [ 0.485345] CPU4: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 [ 0.485352] Skipping synchronization checks as TSC is reliable. [ 0.485834] lockdep: fixing up alternatives. [ 0.485862] Booting processor 5 APIC 0x3 ip 0x6000 [ 0.496119] Initializing CPU#5 [ 0.556782] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672338) [ 0.556788] CPU: Physical Processor ID: 0 [ 0.556789] CPU: Processor Core ID: 1 [ 0.556791] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.556792] CPU: L2 cache: 256K [ 0.556793] CPU: L3 cache: 8192K [ 0.557281] CPU5: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 [ 0.557288] Skipping synchronization checks as TSC is reliable. [ 0.557803] lockdep: fixing up alternatives. [ 0.557831] Booting processor 6 APIC 0x5 ip 0x6000 [ 0.568089] Initializing CPU#6 [ 0.628751] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672338) [ 0.628757] CPU: Physical Processor ID: 0 [ 0.628758] CPU: Processor Core ID: 2 [ 0.628760] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.628761] CPU: L2 cache: 256K [ 0.628762] CPU: L3 cache: 8192K [ 0.629250] CPU6: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 [ 0.629258] Skipping synchronization checks as TSC is reliable. [ 0.629771] lockdep: fixing up alternatives. [ 0.629799] Booting processor 7 APIC 0x7 ip 0x6000 [ 0.640057] Initializing CPU#7 [ 0.701720] Calibrating delay using timer specific routine.. 5451.57 BogoMIPS (lpj=2725787) [ 0.701728] CPU: Physical Processor ID: 0 [ 0.701729] CPU: Processor Core ID: 3 [ 0.701731] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.701733] CPU: L2 cache: 256K [ 0.701734] CPU: L3 cache: 8192K [ 0.702271] CPU7: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 [ 0.702278] Skipping synchronization checks as TSC is reliable. [ 0.702298] Brought up 8 CPUs [ 0.702300] Total of 8 processors activated (42971.24 BogoMIPS). [ 0.702409] CPU0 attaching sched-domain: [ 0.702412] domain 0: span 0,4 level SIBLING [ 0.702413] groups: 0 4 [ 0.702417] domain 1: span 0-7 level MC [ 0.702419] groups: 0,4 1,5 2,6 3,7 [ 0.702436] CPU1 attaching sched-domain: [ 0.702438] domain 0: span 1,5 level SIBLING [ 0.702440] groups: 1 5 [ 0.702442] domain 1: span 0-7 level MC [ 0.702444] groups: 1,5 2,6 3,7 0,4 [ 0.702450] CPU2 attaching sched-domain: [ 0.702451] domain 0: span 2,6 level SIBLING [ 0.702453] groups: 2 6 [ 0.702456] domain 1: span 0-7 level MC [ 0.702458] groups: 2,6 3,7 0,4 1,5 [ 0.702464] CPU3 attaching sched-domain: [ 0.702465] domain 0: span 3,7 level SIBLING [ 0.702467] groups: 3 7 [ 0.702470] domain 1: span 0-7 level MC [ 0.702471] groups: 3,7 0,4 1,5 2,6 [ 0.702477] CPU4 attaching sched-domain: [ 0.702478] domain 0: span 0,4 level SIBLING [ 0.702480] groups: 4 0 [ 0.702483] domain 1: span 0-7 level MC [ 0.702485] groups: 0,4 1,5 2,6 3,7 [ 0.702490] CPU5 attaching sched-domain: [ 0.702492] domain 0: span 1,5 level SIBLING [ 0.702494] groups: 5 1 [ 0.702496] domain 1: span 0-7 level MC [ 0.702498] groups: 1,5 2,6 3,7 0,4 [ 0.702504] CPU6 attaching sched-domain: [ 0.702505] domain 0: span 2,6 level SIBLING [ 0.702507] groups: 6 2 [ 0.702510] domain 1: span 0-7 level MC [ 0.702512] groups: 2,6 3,7 0,4 1,5 [ 0.702517] CPU7 attaching sched-domain: [ 0.702519] domain 0: span 3,7 level SIBLING [ 0.702521] groups: 7 3 [ 0.702523] domain 1: span 0-7 level MC [ 0.702525] groups: 3,7 0,4 1,5 2,6 [ 0.703272] Booting paravirtualized kernel on bare hardware [ 0.703528] regulator: core version 0.5 [ 0.703553] Time: 9:55:58 Date: 08/27/09 [ 0.703740] NET: Registered protocol family 16 [ 0.704163] ACPI: bus type pci registered [ 0.704272] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.704274] PCI: Not using MMCONFIG. [ 0.704275] PCI: Using configuration type 1 for base access [ 0.705887] bio: create slab at 0 [ 0.708561] ACPI: EC: Look up EC in DSDT [ 0.747593] ACPI: Interpreter enabled [ 0.747597] ACPI: (supports S0 S1 S3 S4 S5) [ 0.747644] ACPI: Using IOAPIC for interrupt routing [ 0.747711] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.750497] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.752010] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.764254] ACPI Warning: Incorrect checksum in table [OEMB] - 8B, should be 83 20090521 tbutils-246 [ 0.764510] ACPI: No dock devices found. [ 0.764666] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.764889] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.764893] pci 0000:00:00.0: PME# disabled [ 0.764963] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.764966] pci 0000:00:01.0: PME# disabled [ 0.765038] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.765041] pci 0000:00:03.0: PME# disabled [ 0.765114] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.765118] pci 0000:00:07.0: PME# disabled [ 0.765529] pci 0000:00:1a.0: reg 20 io port: [0xb800-0xb81f] [ 0.765607] pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f] [ 0.765687] pci 0000:00:1a.2: reg 20 io port: [0xbc00-0xbc1f] [ 0.765774] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf7fff000-0xf7fff3ff] [ 0.765835] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.765840] pci 0000:00:1a.7: PME# disabled [ 0.765887] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7ff8000-0xf7ffbfff] [ 0.765935] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.765938] pci 0000:00:1b.0: PME# disabled [ 0.766003] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.766007] pci 0000:00:1c.0: PME# disabled [ 0.766078] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.766082] pci 0000:00:1c.2: PME# disabled [ 0.766148] pci 0000:00:1d.0: reg 20 io port: [0xb080-0xb09f] [ 0.766231] pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f] [ 0.766309] pci 0000:00:1d.2: reg 20 io port: [0xb480-0xb49f] [ 0.766395] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7ffe000-0xf7ffe3ff] [ 0.766456] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.766460] pci 0000:00:1d.7: PME# disabled [ 0.766596] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.766600] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO [ 0.766603] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.766608] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f) [ 0.766668] pci 0000:00:1f.2: reg 10 io port: [0xa000-0xa007] [ 0.766674] pci 0000:00:1f.2: reg 14 io port: [0x9c00-0x9c03] [ 0.766680] pci 0000:00:1f.2: reg 18 io port: [0x9880-0x9887] [ 0.766686] pci 0000:00:1f.2: reg 1c io port: [0x9800-0x9803] [ 0.766693] pci 0000:00:1f.2: reg 20 io port: [0x9480-0x948f] [ 0.766699] pci 0000:00:1f.2: reg 24 io port: [0x9400-0x940f] [ 0.766753] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf7ffd000-0xf7ffd0ff] [ 0.766768] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.766819] pci 0000:00:1f.5: reg 10 io port: [0xb000-0xb007] [ 0.766824] pci 0000:00:1f.5: reg 14 io port: [0xac00-0xac03] [ 0.766830] pci 0000:00:1f.5: reg 18 io port: [0xa880-0xa887] [ 0.766836] pci 0000:00:1f.5: reg 1c io port: [0xa800-0xa803] [ 0.766842] pci 0000:00:1f.5: reg 20 io port: [0xa480-0xa48f] [ 0.766848] pci 0000:00:1f.5: reg 24 io port: [0xa400-0xa40f] [ 0.766970] pci 0000:02:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.766980] pci 0000:02:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] [ 0.766990] pci 0000:02:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] [ 0.766996] pci 0000:02:00.0: reg 24 io port: [0xcc00-0xcc7f] [ 0.767002] pci 0000:02:00.0: reg 30 32bit mmio: [0xfb480000-0xfb4fffff] [ 0.767079] pci 0000:00:03.0: bridge io port: [0xc000-0xcfff] [ 0.767083] pci 0000:00:03.0: bridge 32bit mmio: [0xf8000000-0xfb4fffff] [ 0.767088] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.767208] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf4f00000-0xf4ffffff] [ 0.767260] pci 0000:04:00.0: reg 10 io port: [0xd800-0xd8ff] [ 0.767281] pci 0000:04:00.0: reg 18 64bit mmio: [0xfb5ff000-0xfb5fffff] [ 0.767296] pci 0000:04:00.0: reg 20 64bit mmio: [0xf4ef0000-0xf4efffff] [ 0.767304] pci 0000:04:00.0: reg 30 32bit mmio: [0xfb5c0000-0xfb5dffff] [ 0.767348] pci 0000:04:00.0: supports D1 D2 [ 0.767350] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.767355] pci 0000:04:00.0: PME# disabled [ 0.767429] pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff] [ 0.767433] pci 0000:00:1c.2: bridge 32bit mmio: [0xfb500000-0xfb5fffff] [ 0.767439] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf4e00000-0xf4efffff] [ 0.767479] pci 0000:06:00.0: reg 10 32bit mmio: [0xfb6f8000-0xfb6fffff] [ 0.767569] pci 0000:06:01.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.767590] pci 0000:06:01.0: supports D1 D2 [ 0.767592] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.767596] pci 0000:06:01.0: PME# disabled [ 0.767659] pci 0000:00:1e.0: transparent bridge [ 0.767663] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] [ 0.767667] pci 0000:00:1e.0: bridge 32bit mmio: [0xfb600000-0xfbefffff] [ 0.767673] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf5000000-0xf6ffffff] [ 0.767725] pci_bus 0000:00: on NUMA node 0 [ 0.767730] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.768162] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.768316] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.768390] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 0.768473] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT] [ 0.768540] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT] [ 0.768607] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT] [ 0.801367] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15) [ 0.801504] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 0.801636] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.801774] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15) [ 0.801909] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15) [ 0.802059] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15) [ 0.802197] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15) [ 0.802332] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15) [ 0.802653] SCSI subsystem initialized [ 0.802851] libata version 3.00 loaded. [ 0.802951] usbcore: registered new interface driver usbfs [ 0.802973] usbcore: registered new interface driver hub [ 0.803003] usbcore: registered new device driver usb [ 0.803191] ACPI: WMI: Mapper loaded [ 0.803192] PCI: Using ACPI for IRQ routing [ 0.812233] Bluetooth: Core ver 2.15 [ 0.812283] NET: Registered protocol family 31 [ 0.812284] Bluetooth: HCI device and connection manager initialized [ 0.812303] Bluetooth: HCI socket layer initialized [ 0.812305] NET: Registered protocol family 8 [ 0.812307] NET: Registered protocol family 20 [ 0.812324] NetLabel: Initializing [ 0.812325] NetLabel: domain hash size = 128 [ 0.812326] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.812367] NetLabel: unlabeled traffic allowed by default [ 0.812621] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.812626] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.820704] Switched to high resolution mode on CPU 0 [ 0.821117] Switched to high resolution mode on CPU 2 [ 0.821119] Switched to high resolution mode on CPU 3 [ 0.821128] Switched to high resolution mode on CPU 1 [ 0.821183] Switched to high resolution mode on CPU 5 [ 0.821185] Switched to high resolution mode on CPU 6 [ 0.821190] Switched to high resolution mode on CPU 7 [ 0.821194] Switched to high resolution mode on CPU 4 [ 0.834949] pnp: PnP ACPI init [ 0.834979] ACPI: bus type pnp registered [ 0.838629] pnp: PnP ACPI: found 15 devices [ 0.838631] ACPI: ACPI bus type pnp unregistered [ 0.838645] system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved [ 0.838647] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved [ 0.838650] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved [ 0.838652] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved [ 0.838655] system 00:01: iomem range 0xfec8a000-0xfec8afff could not be reserved [ 0.838657] system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved [ 0.838666] system 00:07: ioport range 0x290-0x29f has been reserved [ 0.838673] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.838675] system 00:08: ioport range 0x800-0x87f has been reserved [ 0.838678] system 00:08: ioport range 0x500-0x57f could not be reserved [ 0.838682] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.838685] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.838688] system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved [ 0.838696] system 00:0b: iomem range 0xffc00000-0xffdfffff has been reserved [ 0.838703] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.838706] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.838712] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 0.838721] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.838723] system 00:0e: iomem range 0xc0000-0xcffff has been reserved [ 0.838726] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 0.838728] system 00:0e: iomem range 0x100000-0xbfefffff could not be reserved [ 0.838731] system 00:0e: iomem range 0xfed90000-0xffffffff could not be reserved [ 0.843550] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.843551] pci 0000:00:01.0: IO window: disabled [ 0.843556] pci 0000:00:01.0: MEM window: disabled [ 0.843559] pci 0000:00:01.0: PREFETCH window: disabled [ 0.843563] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02 [ 0.843565] pci 0000:00:03.0: IO window: 0xc000-0xcfff [ 0.843570] pci 0000:00:03.0: MEM window: 0xf8000000-0xfb4fffff [ 0.843573] pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.843579] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03 [ 0.843580] pci 0000:00:07.0: IO window: disabled [ 0.843584] pci 0000:00:07.0: MEM window: disabled [ 0.843587] pci 0000:00:07.0: PREFETCH window: disabled [ 0.843591] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05 [ 0.843592] pci 0000:00:1c.0: IO window: disabled [ 0.843597] pci 0000:00:1c.0: MEM window: disabled [ 0.843600] pci 0000:00:1c.0: PREFETCH window: 0x000000f4f00000-0x000000f4ffffff [ 0.843606] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 [ 0.843609] pci 0000:00:1c.2: IO window: 0xd000-0xdfff [ 0.843614] pci 0000:00:1c.2: MEM window: 0xfb500000-0xfb5fffff [ 0.843618] pci 0000:00:1c.2: PREFETCH window: 0x000000f4e00000-0x000000f4efffff [ 0.843631] pci 0000:06:01.0: CardBus bridge, secondary bus 0000:07 [ 0.843633] pci 0000:06:01.0: IO window: 0x00e000-0x00e0ff [ 0.843637] pci 0000:06:01.0: IO window: 0x00e400-0x00e4ff [ 0.843641] pci 0000:06:01.0: PREFETCH window: 0xc0000000-0xc3ffffff [ 0.843645] pci 0000:06:01.0: MEM window: 0xc4000000-0xc7ffffff [ 0.843650] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 [ 0.843652] pci 0000:00:1e.0: IO window: 0xe000-0xefff [ 0.843657] pci 0000:00:1e.0: MEM window: 0xfb600000-0xfbefffff [ 0.843661] pci 0000:00:1e.0: PREFETCH window: 0x000000f5000000-0x000000f6ffffff [ 0.843674] pci 0000:00:01.0: setting latency timer to 64 [ 0.843684] pci 0000:00:03.0: setting latency timer to 64 [ 0.843691] pci 0000:00:07.0: setting latency timer to 64 [ 0.843702] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.843706] pci 0000:00:1c.0: setting latency timer to 64 [ 0.843715] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.843719] pci 0000:00:1c.2: setting latency timer to 64 [ 0.843725] pci 0000:00:1e.0: setting latency timer to 64 [ 0.843733] pci 0000:06:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.843738] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.843740] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.843742] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff] [ 0.843744] pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfb4fffff] [ 0.843745] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.843747] pci_bus 0000:05: resource 2 pref mem [0xf4f00000-0xf4ffffff] [ 0.843749] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff] [ 0.843751] pci_bus 0000:04: resource 1 mem: [0xfb500000-0xfb5fffff] [ 0.843753] pci_bus 0000:04: resource 2 pref mem [0xf4e00000-0xf4efffff] [ 0.843754] pci_bus 0000:06: resource 0 io: [0xe000-0xefff] [ 0.843756] pci_bus 0000:06: resource 1 mem: [0xfb600000-0xfbefffff] [ 0.843758] pci_bus 0000:06: resource 2 pref mem [0xf5000000-0xf6ffffff] [ 0.843759] pci_bus 0000:06: resource 3 io: [0x00-0xffff] [ 0.843761] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.843763] pci_bus 0000:07: resource 0 io: [0xe000-0xe0ff] [ 0.843764] pci_bus 0000:07: resource 1 io: [0xe400-0xe4ff] [ 0.843766] pci_bus 0000:07: resource 2 pref mem [0xc0000000-0xc3ffffff] [ 0.843768] pci_bus 0000:07: resource 3 mem: [0xc4000000-0xc7ffffff] [ 0.843882] NET: Registered protocol family 2 [ 0.844106] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.845167] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.845792] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) [ 0.849797] TCP: Hash tables configured (established 262144 bind 65536) [ 0.849819] TCP reno registered [ 0.850039] NET: Registered protocol family 1 [ 0.850239] Trying to unpack rootfs image as initramfs... [ 0.992313] Freeing initrd memory: 7889k freed [ 0.994196] Scanning for low memory corruption every 60 seconds [ 0.994440] audit: initializing netlink socket (disabled) [ 0.994475] type=2000 audit(1251366957.818:1): initialized [ 0.998272] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.998666] VFS: Disk quotas dquot_6.5.2 [ 0.998732] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.999671] fuse init (API version 7.12) [ 0.999737] msgmni has been set to 23813 [ 1.000326] alg: No test for stdrng (krng) [ 1.000373] io scheduler noop registered [ 1.000375] io scheduler anticipatory registered [ 1.000376] io scheduler deadline registered [ 1.000415] io scheduler cfq registered (default) [ 1.000573] pci 0000:02:00.0: Boot video device [ 1.000787] pcieport-driver 0000:00:01.0: irq 48 for MSI/MSI-X [ 1.000795] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 1.000942] pcieport-driver 0000:00:03.0: irq 49 for MSI/MSI-X [ 1.000950] pcieport-driver 0000:00:03.0: setting latency timer to 64 [ 1.001086] pcieport-driver 0000:00:07.0: irq 50 for MSI/MSI-X [ 1.001093] pcieport-driver 0000:00:07.0: setting latency timer to 64 [ 1.001225] pcieport-driver 0000:00:1c.0: irq 51 for MSI/MSI-X [ 1.001233] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.001378] pcieport-driver 0000:00:1c.2: irq 52 for MSI/MSI-X [ 1.001386] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 1.001495] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support [ 1.001514] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support [ 1.001524] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support [ 1.001536] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.001678] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.001926] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.001930] ACPI: Power Button [PWRF] [ 1.002012] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.002015] ACPI: Power Button [PWRB] [ 1.003069] ACPI: SSDT 00000000bf6980c0 00403 (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 1.003925] ACPI: SSDT 00000000bf69a140 003B2 (v01 PmRef P001Cst 00003001 INTL 20060113) [ 1.006844] Monitor-Mwait will be used to enter C-1 state [ 1.006906] Monitor-Mwait will be used to enter C-2 state [ 1.006938] Monitor-Mwait will be used to enter C-3 state [ 1.007076] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 1.007208] processor LNXCPU:00: registered as cooling_device0 [ 1.007757] ACPI: SSDT 00000000bf6984d0 00403 (v01 DpgPmm P002Ist 00000012 INTL 20060113) [ 1.008554] ACPI: SSDT 00000000bf69a500 00085 (v01 PmRef P002Cst 00003000 INTL 20060113) [ 1.011513] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 1.011547] processor LNXCPU:01: registered as cooling_device1 [ 1.012101] ACPI: SSDT 00000000bf6988e0 00403 (v01 DpgPmm P003Ist 00000012 INTL 20060113) [ 1.012905] ACPI: SSDT 00000000bf69a590 00085 (v01 PmRef P003Cst 00003000 INTL 20060113) [ 1.015861] ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3]) [ 1.015895] processor LNXCPU:02: registered as cooling_device2 [ 1.016438] ACPI: SSDT 00000000bf698cf0 00403 (v01 DpgPmm P004Ist 00000012 INTL 20060113) [ 1.017246] ACPI: SSDT 00000000bf69a620 00085 (v01 PmRef P004Cst 00003000 INTL 20060113) [ 1.020206] ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3]) [ 1.020247] processor LNXCPU:03: registered as cooling_device3 [ 1.020795] ACPI: SSDT 00000000bf699100 00403 (v01 DpgPmm P005Ist 00000012 INTL 20060113) [ 1.021600] ACPI: SSDT 00000000bf69a6b0 00085 (v01 PmRef P005Cst 00003000 INTL 20060113) [ 1.024572] ACPI: CPU4 (power states: C1[C1] C2[C2] C3[C3]) [ 1.024610] processor LNXCPU:04: registered as cooling_device4 [ 1.025161] ACPI: SSDT 00000000bf699510 00403 (v01 DpgPmm P006Ist 00000012 INTL 20060113) [ 1.025976] ACPI: SSDT 00000000bf69a740 00085 (v01 PmRef P006Cst 00003000 INTL 20060113) [ 1.028940] ACPI: CPU5 (power states: C1[C1] C2[C2] C3[C3]) [ 1.028975] processor LNXCPU:05: registered as cooling_device5 [ 1.029522] ACPI: SSDT 00000000bf699920 00403 (v01 DpgPmm P007Ist 00000012 INTL 20060113) [ 1.030334] ACPI: SSDT 00000000bf69a7d0 00085 (v01 PmRef P007Cst 00003000 INTL 20060113) [ 1.033293] ACPI: CPU6 (power states: C1[C1] C2[C2] C3[C3]) [ 1.033332] processor LNXCPU:06: registered as cooling_device6 [ 1.033891] ACPI: SSDT 00000000bf699d30 00403 (v01 DpgPmm P008Ist 00000012 INTL 20060113) [ 1.034702] ACPI: SSDT 00000000bf69a860 00085 (v01 PmRef P008Cst 00003000 INTL 20060113) [ 1.037658] ACPI: CPU7 (power states: C1[C1] C2[C2] C3[C3]) [ 1.037694] processor LNXCPU:07: registered as cooling_device7 [ 1.040902] XENFS: not registering filesystem on non-xen platform [ 1.042619] Linux agpgart interface v0.103 [ 1.042624] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.044668] brd: module loaded [ 1.045376] loop: module loaded [ 1.045468] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.045651] ata_piix 0000:00:1f.2: version 2.13 [ 1.045669] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 1.045674] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.045726] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.045806] scsi0 : ata_piix [ 1.046109] scsi1 : ata_piix [ 1.047932] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 20 [ 1.047937] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 20 [ 1.047961] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 1.047965] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 1.048005] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 1.048024] ata1.00: hard resetting link [ 1.048058] scsi2 : ata_piix [ 1.048063] ata2.00: hard resetting link [ 1.048130] scsi3 : ata_piix [ 1.049897] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 20 [ 1.049899] ata1.00: XXX bringing up link [ 1.049902] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 20 [ 1.049904] ata2.00: XXX bringing up link [ 1.050997] Fixed MDIO Bus: probed [ 1.051001] PPP generic driver version 2.4.2 [ 1.051219] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.051243] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.051254] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.051257] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.052060] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.055964] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.055970] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 1.055986] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fff000 [ 1.059976] ata3: hard resetting link [ 1.059990] ata4: hard resetting link [ 1.061588] ata4: XXX bringing up link [ 1.061591] ata3: XXX bringing up link [ 1.064612] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.065051] usb usb1: configuration #1 chosen from 1 choice [ 1.065244] hub 1-0:1.0: USB hub found [ 1.065270] hub 1-0:1.0: 6 ports detected [ 1.065573] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.065585] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.065590] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.065708] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.069602] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.069607] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.069622] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7ffe000 [ 1.078583] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.078708] usb usb2: configuration #1 chosen from 1 choice [ 1.078746] hub 2-0:1.0: USB hub found [ 1.078753] hub 2-0:1.0: 6 ports detected [ 1.078859] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.078884] uhci_hcd: USB Universal Host Controller Interface driver [ 1.078923] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.078929] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.078932] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.078989] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.079022] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800 [ 1.079140] usb usb3: configuration #1 chosen from 1 choice [ 1.079179] hub 3-0:1.0: USB hub found [ 1.079223] hub 3-0:1.0: 2 ports detected [ 1.079323] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.079329] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.079332] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.079384] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.079417] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880 [ 1.079520] usb usb4: configuration #1 chosen from 1 choice [ 1.079558] hub 4-0:1.0: USB hub found [ 1.079566] hub 4-0:1.0: 2 ports detected [ 1.079655] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.079661] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 1.079664] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.079716] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.079750] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000bc00 [ 1.079857] usb usb5: configuration #1 chosen from 1 choice [ 1.079895] hub 5-0:1.0: USB hub found [ 1.079901] hub 5-0:1.0: 2 ports detected [ 1.079980] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.079986] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.079989] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.080042] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.080066] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080 [ 1.080166] usb usb6: configuration #1 chosen from 1 choice [ 1.080203] hub 6-0:1.0: USB hub found [ 1.080210] hub 6-0:1.0: 2 ports detected [ 1.080284] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.080289] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.080292] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.080346] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.080369] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 [ 1.080492] usb usb7: configuration #1 chosen from 1 choice [ 1.080529] hub 7-0:1.0: USB hub found [ 1.080562] hub 7-0:1.0: 2 ports detected [ 1.080642] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.080647] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.080650] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.080703] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.080727] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480 [ 1.080834] usb usb8: configuration #1 chosen from 1 choice [ 1.080874] hub 8-0:1.0: USB hub found [ 1.080880] hub 8-0:1.0: 2 ports detected [ 1.081024] PNP: No PS/2 controller found. Probing ports directly. [ 1.083997] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.084026] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.084406] mice: PS/2 mouse device common for all mice [ 1.084527] rtc_cmos 00:03: RTC can wake from S4 [ 1.084735] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.084767] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.084908] device-mapper: uevent: version 1.0.3 [ 1.085014] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.085217] device-mapper: multipath: version 1.1.0 loaded [ 1.085246] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.086105] cpuidle: using governor ladder [ 1.086827] cpuidle: using governor menu [ 1.087483] TCP cubic registered [ 1.087827] NET: Registered protocol family 10 [ 1.088925] lo: Disabled Privacy Extensions [ 1.089558] NET: Registered protocol family 17 [ 1.089677] Bluetooth: L2CAP ver 2.13 [ 1.089678] Bluetooth: L2CAP socket layer initialized [ 1.089682] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.089683] Bluetooth: SCO socket layer initialized [ 1.089863] Bluetooth: RFCOMM TTY layer initialized [ 1.089867] Bluetooth: RFCOMM socket layer initialized [ 1.089868] Bluetooth: RFCOMM ver 1.11 [ 1.098027] PM: Resume from disk failed. [ 1.098044] registered taskstats version 1 [ 1.098229] Magic number: 5:884:930 [ 1.098381] rtc_cmos 00:03: setting system clock to 2009-08-27 09:55:58 UTC (1251366958) [ 1.098384] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.098385] EDD information not available. [ 1.352601] ata1.00: XXX debounced rc=0 [ 1.352610] ata1.01: hard resetting link [ 1.352625] ata2.00: XXX debounced rc=0 [ 1.352631] ata2.01: hard resetting link [ 1.354571] ata2.01: XXX bringing up link [ 1.354582] ata1.01: XXX bringing up link [ 1.364583] ata3: XXX debounced rc=0 [ 1.364589] ata4: XXX debounced rc=0 [ 1.468533] usb 2-3: new high speed USB device using ehci_hcd and address 2 [ 1.515468] ata4.00: XXX CLASSIFY TF 50/01:01:00:00 [ 1.515471] ata4.00: XXX ata_dev_classify=1 [ 1.515497] ata3.00: XXX CLASSIFY TF 50/01:01:00:00 [ 1.515502] ata3.00: XXX ata_dev_classify=1 [ 1.515504] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.515535] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.518926] ata4.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7 [ 1.518930] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.521792] ata4.00: configured for UDMA/133 [ 1.521798] ata4: EH complete [ 1.534837] ata3.00: ATA-7: SAMSUNG HD753LJ, 1AA01112, max UDMA7 [ 1.534840] ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.553789] ata3.00: configured for UDMA/133 [ 1.553794] ata3: EH complete [ 1.584651] usb 2-3: configuration #1 chosen from 1 choice [ 1.657383] ata1.01: XXX debounced rc=0 [ 1.657391] ------------[ cut here ]------------ [ 1.657398] WARNING: at drivers/ata/libata-core.c:5376 ata_link_offline+0x61/0x70() [ 1.657401] Hardware name: System Product Name [ 1.657403] Modules linked in: [ 1.657407] Pid: 120, comm: scsi_eh_0 Not tainted 2.6.31-rc7 #15 [ 1.657410] Call Trace: [ 1.657416] [] warn_slowpath_common+0x78/0xb0 [ 1.657421] [] warn_slowpath_null+0xf/0x20 [ 1.657425] [] ata_link_offline+0x61/0x70 [ 1.657429] [] sata_link_hardreset+0x239/0x350 [ 1.657434] [] ? sata_std_hardreset+0x0/0x40 [ 1.657438] [] sata_std_hardreset+0x2d/0x40 [ 1.657443] [] ata_do_reset+0x38/0x90 [ 1.657447] [] ? sata_std_hardreset+0x0/0x40 [ 1.657451] [] ata_eh_reset+0x3db/0xd80 [ 1.657457] [] ? ata_sff_softreset+0x0/0x180 [ 1.657461] [] ? ata_sff_postreset+0x0/0x90 [ 1.657465] [] ? sata_std_hardreset+0x0/0x40 [ 1.657470] [] ? ata_eh_schedule_probe+0xda/0x100 [ 1.657475] [] ? ata_sff_postreset+0x0/0x90 [ 1.657479] [] ata_eh_recover+0x2c0/0xf10 [ 1.657483] [] ? ata_eh_about_to_do+0x32/0x90 [ 1.657490] [] ? _spin_unlock_irqrestore+0x65/0x80 [ 1.657495] [] ? ata_sff_postreset+0x0/0x90 [ 1.657499] [] ? sata_std_hardreset+0x0/0x40 [ 1.657503] [] ? ata_sff_softreset+0x0/0x180 [ 1.657508] [] ? ata_sff_prereset+0x0/0xc0 [ 1.657512] [] ? _spin_unlock_irqrestore+0x45/0x80 [ 1.657517] [] ? ata_eh_clear_action+0xe0/0x100 [ 1.657521] [] ? ata_sff_softreset+0x0/0x180 [ 1.657529] [] ? ata_sff_prereset+0x0/0xc0 [ 1.657531] [] ? ata_sff_softreset+0x0/0x180 [ 1.657533] [] ? sata_std_hardreset+0x0/0x40 [ 1.657536] [] ? ata_sff_postreset+0x0/0x90 [ 1.657538] [] ata_do_eh+0x4f/0xd0 [ 1.657540] [] ? ata_sff_softreset+0x0/0x180 [ 1.657543] [] ? sata_std_hardreset+0x0/0x40 [ 1.657545] [] ata_sff_error_handler+0x10e/0x220 [ 1.657548] [] ata_scsi_error+0x64c/0x900 [ 1.657551] [] scsi_error_handler+0x11f/0x650 [ 1.657554] [] ? scsi_error_handler+0x0/0x650 [ 1.657557] [] kthread+0xa6/0xb0 [ 1.657560] [] child_rip+0xa/0x20 [ 1.657564] [] ? restore_args+0x0/0x30 [ 1.657566] [] ? kthread+0x0/0xb0 [ 1.657568] [] ? child_rip+0x0/0x20 [ 1.657570] ---[ end trace 9d6661642b6752d6 ]--- [ 1.657574] ata1.01: XXX phys link offline, l=1 p=1 [ 1.657652] ata2.01: XXX debounced rc=0 [ 1.657658] ------------[ cut here ]------------ [ 1.657661] WARNING: at drivers/ata/libata-core.c:5376 ata_link_offline+0x61/0x70() [ 1.657662] Hardware name: System Product Name [ 1.657663] Modules linked in: [ 1.657665] Pid: 121, comm: scsi_eh_1 Tainted: G W 2.6.31-rc7 #15 [ 1.657666] Call Trace: [ 1.657669] [] warn_slowpath_common+0x78/0xb0 [ 1.657671] [] warn_slowpath_null+0xf/0x20 [ 1.657674] [] ata_link_offline+0x61/0x70 [ 1.657676] [] sata_link_hardreset+0x239/0x350 [ 1.657679] [] ? sata_std_hardreset+0x0/0x40 [ 1.657681] [] sata_std_hardreset+0x2d/0x40 [ 1.657683] [] ata_do_reset+0x38/0x90 [ 1.657686] [] ? sata_std_hardreset+0x0/0x40 [ 1.657688] [] ata_eh_reset+0x3db/0xd80 [ 1.657691] [] ? ata_sff_softreset+0x0/0x180 [ 1.657693] [] ? ata_sff_postreset+0x0/0x90 [ 1.657696] [] ? sata_std_hardreset+0x0/0x40 [ 1.657698] [] ? ata_eh_schedule_probe+0xda/0x100 [ 1.657701] [] ? ata_sff_postreset+0x0/0x90 [ 1.657703] [] ata_eh_recover+0x2c0/0xf10 [ 1.657706] [] ? ata_eh_about_to_do+0x32/0x90 [ 1.657709] [] ? _spin_unlock_irqrestore+0x65/0x80 [ 1.657714] [] ? ata_sff_postreset+0x0/0x90 [ 1.657716] [] ? sata_std_hardreset+0x0/0x40 [ 1.657719] [] ? ata_sff_softreset+0x0/0x180 [ 1.657721] [] ? ata_sff_prereset+0x0/0xc0 [ 1.657724] [] ? _spin_unlock_irqrestore+0x45/0x80 [ 1.657726] [] ? ata_eh_clear_action+0xe0/0x100 [ 1.657729] [] ? ata_sff_softreset+0x0/0x180 [ 1.657731] [] ? ata_sff_prereset+0x0/0xc0 [ 1.657733] [] ? ata_sff_softreset+0x0/0x180 [ 1.657736] [] ? sata_std_hardreset+0x0/0x40 [ 1.657738] [] ? ata_sff_postreset+0x0/0x90 [ 1.657740] [] ata_do_eh+0x4f/0xd0 [ 1.657743] [] ? ata_sff_softreset+0x0/0x180 [ 1.657745] [] ? sata_std_hardreset+0x0/0x40 [ 1.657747] [] ata_sff_error_handler+0x10e/0x220 [ 1.657750] [] ata_scsi_error+0x64c/0x900 [ 1.657753] [] scsi_error_handler+0x11f/0x650 [ 1.657755] [] ? scsi_error_handler+0x0/0x650 [ 1.657757] [] kthread+0xa6/0xb0 [ 1.657760] [] child_rip+0xa/0x20 [ 1.657762] [] ? restore_args+0x0/0x30 [ 1.657765] [] ? kthread+0x0/0xb0 [ 1.657766] [] ? child_rip+0x0/0x20 [ 1.657768] ---[ end trace 9d6661642b6752d7 ]--- [ 1.657772] ata2.01: XXX phys link offline, l=1 p=1 [ 1.791329] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 1.808367] ata2.00: XXX CLASSIFY TF 50/01:01:00:00 [ 1.808371] ata2.00: XXX ata_dev_classify=1 [ 1.808382] ata2.01: XXX CLASSIFY TF 00/01:01:00:00 [ 1.808384] ata2.01: XXX ata_dev_classify=1 [ 1.808387] ata2.01: XXX stat==0 -> NONE [ 1.808421] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.808431] ata2.01: SATA link down (SStatus 0 SControl 300) [ 1.808586] ata1.00: XXX CLASSIFY TF 00/01:01:14:eb [ 1.808587] ata1.00: XXX ata_dev_classify=3 [ 1.808596] ata1.01: XXX CLASSIFY TF 00/01:01:14:eb [ 1.808597] ata1.01: XXX ata_dev_classify=3 [ 1.808624] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.808635] ata1.01: SATA link down (SStatus 0 SControl 300) [ 1.811691] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S223B, SB01, max UDMA/100 [ 1.817590] ata1.00: configured for UDMA/100 [ 1.817919] ata1: EH complete [ 1.819270] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223B SB01 PQ: 0 ANSI: 5 [ 1.823382] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.823386] Uniform CD-ROM driver Revision: 3.20 [ 1.823676] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.824018] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.827720] ata2.00: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA7 [ 1.827724] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.846638] ata2.00: configured for UDMA/133 [ 1.846643] ata2: EH complete [ 1.846889] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5 [ 1.847195] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.847218] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.847276] sd 1:0:0:0: [sda] Write Protect is off [ 1.847278] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.847302] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5 [ 1.847305] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.847493] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.847589] sd 2:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 1.847655] sda: [ 1.847662] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 1.847677] sd 2:0:0:0: [sdb] Write Protect is off [ 1.847680] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.847724] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.847901] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.847966] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 1.847984] sd 3:0:0:0: [sdc] Write Protect is off [ 1.847987] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.848034] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.848232] sdb: [ 1.848389] sdc: sdb1 [ 1.853798] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.854949] sda1 sda2 < sdc1 [ 1.875409] sd 3:0:0:0: [sdc] Attached SCSI disk [ 1.877177] sda5 > [ 1.877748] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.877909] Freeing unused kernel memory: 516k freed [ 1.877982] Write protecting the kernel read-only data: 7336k [ 1.957916] usb 3-1: configuration #1 chosen from 1 choice [ 2.051649] Floppy drive(s): fd0 is 1.44M [ 2.067084] FDC 0 is a post-1991 82077 [ 2.069063] usbcore: registered new interface driver hiddev [ 2.071463] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.071484] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.071524] r8169 0000:04:00.0: setting latency timer to 64 [ 2.071588] r8169 0000:04:00.0: irq 53 for MSI/MSI-X [ 2.072880] eth0: RTL8168c/8111c at 0xffffc90000022000, 00:24:8c:a7:6e:2d, XID 3c4000c0 IRQ 53 [ 2.078941] Initializing USB Mass Storage driver... [ 2.079148] scsi4 : SCSI emulation for USB Mass Storage devices [ 2.079348] usb-storage: device found at 2 [ 2.079350] usb-storage: waiting for device to settle before scanning [ 2.079380] usbcore: registered new interface driver usb-storage [ 2.079385] USB Mass Storage support registered. [ 2.094022] input: Cherry GmbH Cherry TouchBoard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input3 [ 2.094672] generic-usb 0003:046A:002F.0001: input,hidraw0: USB HID v1.11 Keyboard [Cherry GmbH Cherry TouchBoard] on usb-0000:00:1a.0-1/input0 [ 2.122954] input: Cherry GmbH Cherry TouchBoard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input4 [ 2.123134] generic-usb 0003:046A:002F.0002: input,hidraw1: USB HID v1.11 Mouse [Cherry GmbH Cherry TouchBoard] on usb-0000:00:1a.0-1/input1 [ 2.123166] usbcore: registered new interface driver usbhid [ 2.123171] usbhid: v2.6:USB HID core driver [ 2.209101] usb 3-2: new low speed USB device using uhci_hcd and address 3 [ 2.372796] usb 3-2: configuration #1 chosen from 1 choice [ 2.388838] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input5 [ 2.388977] generic-usb 0003:046D:C03D.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-2/input0 [ 2.476037] PM: Starting manual resume from disk [ 2.476047] PM: Resume from partition 8:5 [ 2.476048] PM: Checking hibernation image. [ 2.476334] PM: Resume from disk failed. [ 2.519230] EXT4-fs (sda1): barriers enabled [ 2.541076] kjournald2 starting: pid 1010, dev sda1:8, commit interval 5 seconds [ 2.541179] EXT4-fs (sda1): delayed allocation enabled [ 2.541182] EXT4-fs: file extents enabled [ 2.582231] EXT4-fs: mballoc enabled [ 2.582286] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 5.851626] udev: starting version 141 [ 6.331768] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 6.606687] nvidia: module license 'NVIDIA' taints kernel. [ 6.606691] Disabling lock debugging due to kernel taint [ 6.670260] iTCO_vendor_support: vendor-support=0 [ 6.684272] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 6.684348] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860) [ 6.684394] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 6.788354] yenta_cardbus 0000:06:01.0: CardBus bridge found [1524:1410] [ 6.788372] yenta_cardbus 0000:06:01.0: Using CSCINT to route CSC interrupts to PCI [ 6.788374] yenta_cardbus 0000:06:01.0: Routing CardBus interrupts to PCI [ 6.788378] yenta_cardbus 0000:06:01.0: TI: mfunc 0x00001002, devctl 0x44 [ 6.833325] cfg80211: Calling CRDA to update world regulatory domain [ 6.863702] nvidia 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 [ 6.863709] nvidia 0000:02:00.0: setting latency timer to 64 [ 6.863789] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 190.18.03 Fri Jul 31 21:54:40 PDT 2009 [ 6.922555] cfg80211: World regulatory domain updated: [ 6.922558] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6.922560] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.922562] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6.922563] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6.922565] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.922567] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7.012064] yenta_cardbus 0000:06:01.0: ISA IRQ mask 0x0000, PCI irq 17 [ 7.012067] yenta_cardbus 0000:06:01.0: Socket status: 30000020 [ 7.012070] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a [ 7.012077] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff [ 7.012080] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge Memory window: 0xfb600000 - 0xfbefffff [ 7.012082] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge Memory window: 0xf5000000 - 0xf6ffffff [ 7.022537] rt61pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.076226] usb-storage: device scan complete [ 7.076992] scsi 4:0:0:0: Direct-Access SAMSUNG HD103UI 1113 PQ: 0 ANSI: 2 CCS [ 7.078156] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 7.078780] sd 4:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 7.079524] sd 4:0:0:0: [sdd] Write Protect is off [ 7.079526] sd 4:0:0:0: [sdd] Mode Sense: 00 38 00 00 [ 7.079528] sd 4:0:0:0: [sdd] Assuming drive cache: write through [ 7.080898] sd 4:0:0:0: [sdd] Assuming drive cache: write through [ 7.080904] sdd: sdd1 [ 7.083201] sd 4:0:0:0: [sdd] Assuming drive cache: write through [ 7.083204] sd 4:0:0:0: [sdd] Attached SCSI disk [ 7.096332] phy0: Selected rate control algorithm 'minstrel' [ 7.097438] Registered led device: rt61pci-phy0::radio [ 7.097470] Registered led device: rt61pci-phy0::assoc [ 7.117798] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 7.117826] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 7.162952] hda_codec: Unknown model for ALC1200, trying auto-probe from BIOS... [ 7.635584] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0 [ 7.635617] pci 0000:07:00.0: reg 10 32bit mmio: [0x000000-0x00ffff] [ 7.635685] yenta_cardbus 0000:06:01.0: EnE: chaning testregister 0xC9, 0e -> 0c [ 7.677454] RME Hammerfall DSP 0000:07:00.0: enabling device (0000 -> 0002) [ 7.677462] RME Hammerfall DSP 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 10.536195] Hammerfall-DSP: Firmware already present, initializing card. [ 10.651786] lp: driver loaded but no devices found [ 10.810402] Adding 2000052k swap on /dev/sda5. Priority:-1 extents:1 across:2000052k [ 11.348577] EXT4-fs (sda1): internal journal on sda1:8 [ 17.364984] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.364986] Bluetooth: BNEP filters: protocol multicast [ 17.400676] Bridge firewalling registered [ 18.428905] ppdev: user-space parallel port driver [ 22.588331] r8169: eth0: link down [ 22.589707] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.590285] rt61pci 0000:06:00.0: firmware: requesting rt2561.bin [ 22.767914] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 46.676709] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 46.678893] SGI XFS Quota Management subsystem [ 46.680813] XFS mounting filesystem sdd1 [ 46.919799] Ending clean XFS mount for filesystem: sdd1 [ 49.967631] wlan0: authenticate with AP 00:24:fe:09:94:18 [ 49.969429] wlan0: authenticated [ 49.969432] wlan0: associate with AP 00:24:fe:09:94:18 [ 49.972032] wlan0: RX AssocResp from 00:24:fe:09:94:18 (capab=0x401 status=0 aid=1) [ 49.972036] wlan0: associated [ 49.973706] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 60.638529] wlan0: no IPv6 routers present