Message-Id: <200909010316.58715.tfjellstrom@shaw.ca>
Date:	Tue, 1 Sep 2009 03:16:58 -0600
From:	Thomas Fjellstrom <tfjellstrom@...w.ca>
To:	linux-kernel@...r.kernel.org
Subject: sata exception frozen timeout?

I've recently started seeing the following messages from a new WD Green drive, 
not long after I had to RMA a Seagate drive for a strange (but different) 
error. Highlights from my dmesg include:

[59634.792101] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 
frozen
[59634.792121] ata6.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0
[59634.792125]          res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 
(timeout)
[59634.792133] ata6.00: status: { DRDY }
[59634.792145] ata6: hard resetting link
[59635.277695] ata6: softreset failed (device not ready)
[59635.277705] ata6: failed due to HW bug, retry pmp=0
[59635.441570] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[59635.454030] ata6.00: configured for UDMA/133
[59635.454068] ata6: EH complete
...
[59713.792224] ata6.00: NCQ disabled due to excessive errors
[59713.792236] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 
frozen
[59713.792254] ata6.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0
[59713.792257]          res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 
(timeout)
[59713.792264] ata6.00: status: { DRDY }
...
[63484.781764] ata6: hard resetting link
[63485.264204] ata6: softreset failed (device not ready)
[63485.264214] ata6: failed due to HW bug, retry pmp=0
[63485.428205] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[63485.440499] ata6.00: configured for UDMA/100
[63485.440536] ata6: EH complete
[63493.780182] ata6.00: limiting speed to UDMA/33:PIO4
[63493.780194] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 
frozen
[63493.780211] ata6.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0
[63493.780214]          res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 
(timeout)
[63493.780221] ata6.00: status: { DRDY }
...
[99318.070669] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[99318.070679] ata6.00: irq_stat 0x40000001
[99318.070698] ata6.00: cmd 25/00:00:30:bd:01/00:01:1b:00:00/e0 tag 0 dma 
131072 in
[99318.070701]          res 41/04:ef:30:bd:01/00:00:1b:00:00/e0 Emask 0x1 
(device error)
[99318.070709] ata6.00: status: { DRDY ERR }
[99318.070714] ata6.00: error: { ABRT }
[99318.082588] ata6.00: configured for UDMA/33
[99318.082612] ata6: EH complete
...
[99339.780358] ata6: hard resetting link
[99349.785096] ata6: softreset failed (device not ready)
[99349.785108] ata6: hard resetting link
[99359.789033] ata6: softreset failed (device not ready)
[99359.789045] ata6: hard resetting link
[99370.352916] ata6: link is slow to respond, please be patient (ready=0)
..
[99400.016925] ata6: softreset failed (device not ready)
[99400.016936] ata6: reset failed, giving up
[99400.016942] ata6.00: disabled
[99400.016986] ata6: EH complete
[99400.017021] sd 5:0:0:0: [sdf] Unhandled error code
[99400.017026] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET 
driverbyte=DRIVER_OK
[99400.017021] sd 5:0:0:0: [sdf] Unhandled error code
[99400.017026] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET 
driverbyte=DRIVER_OK
[99400.017035] end_request: I/O error, dev sdf, sector 453099568
[99400.017045] Buffer I/O error on device md1, logical block 113274390
[99400.017058] Buffer I/O error on device md1, logical block 113274391
[99400.017064] Buffer I/O error on device md1, logical block 113274392
[99400.017070] Buffer I/O error on device md1, logical block 113274393
[99400.017076] Buffer I/O error on device md1, logical block 113274394
[99400.017082] Buffer I/O error on device md1, logical block 113274395
[99400.017088] Buffer I/O error on device md1, logical block 113274396
[99400.017094] Buffer I/O error on device md1, logical block 113274397
[99400.017100] Buffer I/O error on device md1, logical block 113274398
[99400.017106] Buffer I/O error on device md1, logical block 113274399
[99400.017115] sd 5:0:0:0: [sdf] Unhandled error code
[99400.017123] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET 
driverbyte=DRIVER_OK
[99400.017133] end_request: I/O error, dev sdf, sector 453099824
[99400.017310] sd 5:0:0:0: [sdf] Unhandled error code
[99400.017315] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET 
driverbyte=DRIVER_OK
[99400.017322] end_request: I/O error, dev sdf, sector 453099568
[99400.017383] program smartctl is using a deprecated SCSI ioctl, please 
convert it to SG_IO
[99400.017456] program smartctl is using a deprecated SCSI ioctl, please 
convert it to SG_IO
[99400.018822] sd 5:0:0:0: [sdf] Unhandled error code
[99400.018829] sd 5:0:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET 
driverbyte=DRIVER_OK
[99400.018838] end_request: I/O error, dev sdf, sector 453099568

and a bunch more end_request errors. This happens fairly reliably after a day 
or so of being online. I try and start to play some music or watch a video off 
the array (2xWD Green on md raid0) and it fails. The file system is mostly 
read only right now (that is I don't write to it) so I haven't manged to loose 
any data that I know of, and the fs seems to be fine. A reboot fixes the 
errors and the disk and fs work fine for a day or two before these errors show 
up again.

I'm currently running 2.6.31-rc5 from kernel.org. What would cause these 
errors?

-- 
Thomas Fjellstrom
tfjellstrom@...w.ca
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists