linux-kernel - Re: yenta_socket: PCMCIA-Cards are not recognised by kernel

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <200909040149.45066.christian@kraemer-eu.de>
Date:	Fri, 4 Sep 2009 01:49:44 +0200
From:	Christian Krämer <christian@...emer-eu.de>
To:	Wolfram Sang <w.sang@...gutronix.de>
Cc:	linux-pcmcia@...ts.infradead.org, Frans Pop <elendil@...net.nl>,
	linux-kernel@...r.kernel.org
Subject: Re: yenta_socket: PCMCIA-Cards are not recognised by kernel

On Thursday 03 September 2009 21:37:09 Wolfram Sang wrote:
> > Original message with lspci and dmesg output for .24 is at:
> > http://lkml.org/lkml/2009/9/2/199
>
> For a start:
>
> That line
>
> pcmcia: Detected deprecated PCMCIA ioctl usage from process: hwsetup.
>
> has not much to do with pcmcia_cs. It is just that hwsetup uses a
> deprecated interface (new one is sysfs). Is this message still showing up
> with the newer gentoo-version? I seem to recall that hwsetup got fixed
> meanwhile, but I may be wrong here.

As I said, I don't know very much about hwsetup, but It seems that it only 
detects the hardware and loads the modules for it. It does the right thing 
here: loading the yenta_socket module.

>
> What about these lines?
>
> PCI: Probing PCI hardware
> sysfs: duplicate filename 'bridge' can not be created
> WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
> Pid: 1, comm: swapper Not tainted 2.6.24-gentoo-r7 #1
>  [<c0187ceb>] sysfs_add_one+0x54/0xb8
>  [<c01888da>] sysfs_create_link+0xaf/0xfd
>  [<c02c8020>] pci_bus_add_devices+0xba/0xff
>  [<c037ac1d>] pcibios_scan_root+0x25/0x80
>  [<c011ab3d>] printk+0x1b/0x1f
>  [<c052822f>] pci_legacy_init+0x53/0xe1
>  [<c0505769>] kernel_init+0x154/0x2b6
>  [<c0102546>] ret_from_fork+0x6/0x20
>  [<c0505615>] kernel_init+0x0/0x2b6
>  [<c0505615>] kernel_init+0x0/0x2b6
>  [<c0103877>] kernel_thread_helper+0x7/0x10
>  =======================
> pci 0000:00:02.0: Error creating sysfs bridge symlink, continuing...
> sysfs: duplicate filename 'bridge' can not be created
> WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
> Pid: 1, comm: swapper Not tainted 2.6.24-gentoo-r7 #1
>  [<c0187ceb>] sysfs_add_one+0x54/0xb8
>  [<c01888da>] sysfs_create_link+0xaf/0xfd
>  [<c02c8020>] pci_bus_add_devices+0xba/0xff
>  [<c052822f>] pci_legacy_init+0x53/0xe1
>  [<c0505769>] kernel_init+0x154/0x2b6
>  [<c0102546>] ret_from_fork+0x6/0x20
>  [<c0505615>] kernel_init+0x0/0x2b6
>  [<c0505615>] kernel_init+0x0/0x2b6
>  [<c0103877>] kernel_thread_helper+0x7/0x10
>  =======================
> pci 0000:00:02.1: Error creating sysfs bridge symlink, cobeholdenntinuing...
>
> Do they still show up with the latest kernel? Is this a known problem with
> this laptop?

I have also installed a gentoo-system with a new (2.6.30) kernel and there was 
the same problem at all (but I don't know the exacly dmsg output). But as I 
said already, it would be no problem to install any specific kernel and I'am 
also able to patch it if necessary if there is a litte chance to get it 
working.

The only thing that I know at the moment is, that with 2.6.30 the problem at 
all is the same (kernel displays that a card is inserted, but it wont apear 
in lspci without the -H1 parameter) ans also, that the gentoo init-scripts of 
an installed system won't use hwsetup. In the installed system I loaded the 
yenta_socket module manually via modprobe.

For this laptop at all there are a lot of problems with newer linux kernels. 
Some people got it working with serveral hacks in the config file of the 
pcmcia_cs suite, but all those tips only fit with pcmcia_cs and so to the 
2.4 kernel. If you're interessted in those sources, i could search the URLs
again in my browser history.

Maybe it also relevant what I read on a german bsd-board. In FreeBSD 4.10 it 
worked perfectly on this laptop, but since 4.11 the slots won't get an 
interrupt assigned. I don't now very much about hardware and driver 
development, but I'am sure that it has to do something with the assigned 
ressources (and maybe with the interrupt).

Today I found also a patch for another thinkpad with a hardware bug: the irq 
pins are not connected. Maybe that's the thing, reffered on the irq 
difference betwenn lspci with and without the -H1 paramtert; with -H1 it 
shows irq 255 instead of 11 which the kernel assign. I'dont know witch role 
irqs play in detection of hardware, but this could be an interesting track.

Here is the URL I found those patch: 
http://www.thinkwiki.org/wiki/760ed_yenta_patch

I'll try this patch tomorrow with the current 2.6.30 kernel, and if it 
couldn't be applied, I try it with the 2.6.15.1 version the patch was 
designed for.

> So much for a glimpse, maybe I'll have a bit more time tomorrow...
>
> Regards,
>
>    Wolfram

It would be very beholden, when you have a look, a hint or something else at 
could solve this problem.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/