linux-kernel - Bringing up secondary rtl8169-based interface causes network hang/dma issues

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <4AA6506A.7040900@iinet.net.au>
Date:	Tue, 08 Sep 2009 20:39:06 +0800
From:	Shane Arnold <clontarf_x@...et.net.au>
To:	linux-kernel@...r.kernel.org
Subject: Bringing up secondary rtl8169-based interface causes network hang/dma
 issues

Also posted at:
http://www.linuxquestions.org/questions/linux-networking-3/rtl8169-hanging-networkdma-issues-on-secondary-interface-ifup-753532/

Hi All,

The issue I am having is when bringing up a second Ethernet interface 
that uses the rtl8169 driver, it seems to cause network issues. I lose 
all network connectivity to the machine, and I simultaneously see a DMA 
error occur for my primary IDE drive.

Two interfaces:

Quote:
eth0 (rtl8168 (using rtl8169 driver) - Onboard PCI-E Gigabit Ethernet)
eth1 (rtl8169 (using rtl8169 driver) - RTL8169 PCI Gigabit Ethernet)
The chipset running the IDE drive that experiences the DMA crash is:

Quote:
ATI Technologies Inc SB700/SB800 IDE Controller (atiixp)
Vitals:

Debian 5.0.1 @ Kernel 2.6.30

00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:01.0 PCI bridge: ASUSTeK Computer Inc. Device 9602
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge 
(PCIE port 2)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA 
Controller [IDE mode]
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 
Controller
00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 
Controller
00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a)
00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 
Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3200 
Graphics
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
03:07.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
03:07.1 Input device controller: Creative Labs SB Audigy Game Port (rev 04)
03:07.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04)

The output from kern.log is as follows (right after bringing the link up)

Sep 8 19:36:42 wdhq kernel: r8169: eth1: link up
Sep 8 19:36:45 wdhq kernel: hda: ide_dma_intr: bad DMA status (0x76)
Sep 8 19:36:45 wdhq kernel: hda: dma_intr: status=0x50 { DriveReady 
SeekComplete }
Sep 8 19:36:45 wdhq kernel: hda: possibly failed opcode: 0x35
Sep 8 19:36:45 wdhq kernel: hda: ide_dma_intr: bad DMA status (0x76)
Sep 8 19:36:45 wdhq kernel: hda: dma_intr: status=0x50 { DriveReady 
SeekComplete }
Sep 8 19:36:45 wdhq kernel: hda: possibly failed opcode: 0x35
Sep 8 19:36:45 wdhq kernel: hda: ide_dma_intr: bad DMA status (0x76)
Sep 8 19:36:45 wdhq kernel: hda: dma_intr: status=0x50 { DriveReady 
SeekComplete }
Sep 8 19:36:45 wdhq kernel: hda: possibly failed opcode: 0x35
Sep 8 19:36:45 wdhq kernel: hda: ide_dma_intr: bad DMA status (0x76)
Sep 8 19:36:45 wdhq kernel: hda: dma_intr: status=0x50 { DriveReady 
SeekComplete }
Sep 8 19:36:45 wdhq kernel: hda: possibly failed opcode: 0x35
Sep 8 19:36:46 wdhq kernel: hda: ide_dma_intr: bad DMA status (0x76)
Sep 8 19:36:46 wdhq kernel: hda: dma_intr: status=0x50 { DriveReady 
SeekComplete }
Sep 8 19:36:46 wdhq kernel: hda: possibly failed opcode: 0x35
Sep 8 19:36:46 wdhq kernel: hda: DMA disabled
Sep 8 19:36:46 wdhq kernel: hdb: DMA disabled
Sep 8 19:36:46 wdhq kernel: ide0: reset: success

If you guys need any package versions just ask. Also feel free to point 
me in the direction of a better place to post this issue.

HELP! I want to be able to multihome but this is stopping me :(

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/