| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20090911193227.GA24320@elte.hu>
Date: Fri, 11 Sep 2009 21:32:27 +0200
From: Ingo Molnar <mingo@...e.hu>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-kernel@...r.kernel.org, "H. Peter Anvin" <hpa@...or.com>,
Thomas Gleixner <tglx@...utronix.de>
Subject: [GIT PULL] x86/apic for v2.6.32
Linus,
Please pull the latest x86-apic-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git x86-apic-for-linus
Thanks,
Ingo
------------------>
Bartlomiej Zolnierkiewicz (1):
x86: Remove superfluous NULL pointer check in destroy_irq()
Cyrill Gorcunov (7):
x86, ioapic: Introduce for_each_irq_pin() helper
x86, ioapic: Throw BUG instead of NULL dereference
x86, apic: Drop redundant bit assignment
x86, ioapic: Panic on irq-pin binding only if needed
x86, ioapic: Define IO_APIC_DEFAULT_PHYS_BASE constant
x86, ioapic: Get rid of needless check and simplify ioapic_setup_resources()
x86, apic: Slim down stack usage in early_init_lapic_mapping()
Feng Tang (1):
ACPI, x86: expose some IO-APIC routines when CONFIG_ACPI=n
Gleb Natapov (1):
x86/apic: Enable x2APIC without interrupt remapping under KVM
Jeremy Fitzhardinge (12):
x86/acpi: acpi_parse_madt_ioapic_entries: remove redundant braces
x86/ioapic.c: ioapic_modify_irq is too large to inline
x86/ioapic.c: unify __mask_IO_APIC_irq()
x86/ioapic.c: remove #ifdef for 82093AA workaround
x86/ioapic.c: remove redundant declaration of irq_pin_list
x86/ioapic.c: move lost comment to what seems like appropriate place
x86/ioapic.c: convert io_apic_level_ack_pending loop to normal for() loop
x86/ioapic.c: simplify add_pin_to_irq_node()
x86/ioapic.c: convert replace_pin_at_irq_node to conventional for() loop
x86/ioapic.c: clean up replace_pin_at_irq_node logic and comments
x86/ioapic.c: convert __target_IO_APIC_irq to conventional for() loop
x86/ioapic.c: unify ioapic_retrigger_irq()
Roel Kluin (1):
x86: Fix x86_model test in es7000_apic_is_cluster()
Yinghai Lu (1):
x86, apic: Move dmar_table_init() out of enable_IR()
arch/x86/include/asm/apic.h | 7 +
arch/x86/include/asm/apicdef.h | 3 +-
arch/x86/include/asm/io_apic.h | 13 ++-
arch/x86/kernel/acpi/boot.c | 105 +------------
arch/x86/kernel/apic/apic.c | 110 +++++++------
arch/x86/kernel/apic/es7000_32.c | 2 +-
arch/x86/kernel/apic/io_apic.c | 324 +++++++++++++++++++++-----------------
arch/x86/kernel/apic/probe_64.c | 6 +-
arch/x86/kernel/mpparse.c | 10 +-
9 files changed, 269 insertions(+), 311 deletions(-)
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index bb7d479..586b7ad 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -183,6 +183,10 @@ static inline int x2apic_enabled(void)
}
#define x2apic_supported() (cpu_has_x2apic)
+static inline void x2apic_force_phys(void)
+{
+ x2apic_phys = 1;
+}
#else
static inline void check_x2apic(void)
{
@@ -194,6 +198,9 @@ static inline int x2apic_enabled(void)
{
return 0;
}
+static inline void x2apic_force_phys(void)
+{
+}
#define x2apic_preenabled 0
#define x2apic_supported() 0
diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h
index 7ddb36a..7386bfa 100644
--- a/arch/x86/include/asm/apicdef.h
+++ b/arch/x86/include/asm/apicdef.h
@@ -8,7 +8,8 @@
* Ingo Molnar <mingo@...hat.com>, 1999, 2000
*/
-#define APIC_DEFAULT_PHYS_BASE 0xfee00000
+#define IO_APIC_DEFAULT_PHYS_BASE 0xfec00000
+#define APIC_DEFAULT_PHYS_BASE 0xfee00000
#define APIC_ID 0x20
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 330ee80..85232d3 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -150,11 +150,10 @@ extern int timer_through_8259;
#define io_apic_assign_pci_irqs \
(mp_irq_entries && !skip_ioapic_setup && io_apic_irqs)
-#ifdef CONFIG_ACPI
+extern u8 io_apic_unique_id(u8 id);
extern int io_apic_get_unique_id(int ioapic, int apic_id);
extern int io_apic_get_version(int ioapic);
extern int io_apic_get_redir_entries(int ioapic);
-#endif /* CONFIG_ACPI */
struct io_apic_irq_attr;
extern int io_apic_set_pci_routing(struct device *dev, int irq,
@@ -177,6 +176,16 @@ extern int setup_ioapic_entry(int apic, int irq,
int polarity, int vector, int pin);
extern void ioapic_write_entry(int apic, int pin,
struct IO_APIC_route_entry e);
+
+struct mp_ioapic_gsi{
+ int gsi_base;
+ int gsi_end;
+};
+extern struct mp_ioapic_gsi mp_gsi_routing[];
+int mp_find_ioapic(int gsi);
+int mp_find_ioapic_pin(int ioapic, int gsi);
+void __init mp_register_ioapic(int id, u32 address, u32 gsi_base);
+
#else /* !CONFIG_X86_IO_APIC */
#define io_apic_assign_pci_irqs 0
static const int timer_through_8259 = 0;
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 6b8ca3a..67e929b 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -833,106 +833,6 @@ static int __init acpi_parse_madt_lapic_entries(void)
extern int es7000_plat;
#endif
-static struct {
- int gsi_base;
- int gsi_end;
-} mp_ioapic_routing[MAX_IO_APICS];
-
-int mp_find_ioapic(int gsi)
-{
- int i = 0;
-
- /* Find the IOAPIC that manages this GSI. */
- for (i = 0; i < nr_ioapics; i++) {
- if ((gsi >= mp_ioapic_routing[i].gsi_base)
- && (gsi <= mp_ioapic_routing[i].gsi_end))
- return i;
- }
-
- printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
- return -1;
-}
-
-int mp_find_ioapic_pin(int ioapic, int gsi)
-{
- if (WARN_ON(ioapic == -1))
- return -1;
- if (WARN_ON(gsi > mp_ioapic_routing[ioapic].gsi_end))
- return -1;
-
- return gsi - mp_ioapic_routing[ioapic].gsi_base;
-}
-
-static u8 __init uniq_ioapic_id(u8 id)
-{
-#ifdef CONFIG_X86_32
- if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
- !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
- return io_apic_get_unique_id(nr_ioapics, id);
- else
- return id;
-#else
- int i;
- DECLARE_BITMAP(used, 256);
- bitmap_zero(used, 256);
- for (i = 0; i < nr_ioapics; i++) {
- struct mpc_ioapic *ia = &mp_ioapics[i];
- __set_bit(ia->apicid, used);
- }
- if (!test_bit(id, used))
- return id;
- return find_first_zero_bit(used, 256);
-#endif
-}
-
-static int bad_ioapic(unsigned long address)
-{
- if (nr_ioapics >= MAX_IO_APICS) {
- printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
- "(found %d)\n", MAX_IO_APICS, nr_ioapics);
- panic("Recompile kernel with bigger MAX_IO_APICS!\n");
- }
- if (!address) {
- printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
- " found in table, skipping!\n");
- return 1;
- }
- return 0;
-}
-
-void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
-{
- int idx = 0;
-
- if (bad_ioapic(address))
- return;
-
- idx = nr_ioapics;
-
- mp_ioapics[idx].type = MP_IOAPIC;
- mp_ioapics[idx].flags = MPC_APIC_USABLE;
- mp_ioapics[idx].apicaddr = address;
-
- set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
- mp_ioapics[idx].apicid = uniq_ioapic_id(id);
- mp_ioapics[idx].apicver = io_apic_get_version(idx);
-
- /*
- * Build basic GSI lookup table to facilitate gsi->io_apic lookups
- * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
- */
- mp_ioapic_routing[idx].gsi_base = gsi_base;
- mp_ioapic_routing[idx].gsi_end = gsi_base +
- io_apic_get_redir_entries(idx);
-
- printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
- "GSI %d-%d\n", idx, mp_ioapics[idx].apicid,
- mp_ioapics[idx].apicver, mp_ioapics[idx].apicaddr,
- mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end);
-
- nr_ioapics++;
-}
-
int __init acpi_probe_gsi(void)
{
int idx;
@@ -947,7 +847,7 @@ int __init acpi_probe_gsi(void)
max_gsi = 0;
for (idx = 0; idx < nr_ioapics; idx++) {
- gsi = mp_ioapic_routing[idx].gsi_end;
+ gsi = mp_gsi_routing[idx].gsi_end;
if (gsi > max_gsi)
max_gsi = gsi;
@@ -1179,9 +1079,8 @@ static int __init acpi_parse_madt_ioapic_entries(void)
* If MPS is present, it will handle them,
* otherwise the system will stay in PIC mode
*/
- if (acpi_disabled || acpi_noirq) {
+ if (acpi_disabled || acpi_noirq)
return -ENODEV;
- }
if (!cpu_has_apic)
return -ENODEV;
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 0a1c283..159740d 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -49,6 +49,7 @@
#include <asm/mtrr.h>
#include <asm/smp.h>
#include <asm/mce.h>
+#include <asm/kvm_para.h>
unsigned int num_processors;
@@ -1361,52 +1362,80 @@ void enable_x2apic(void)
}
#endif /* CONFIG_X86_X2APIC */
-void __init enable_IR_x2apic(void)
+int __init enable_IR(void)
{
#ifdef CONFIG_INTR_REMAP
- int ret;
- unsigned long flags;
- struct IO_APIC_route_entry **ioapic_entries = NULL;
-
- ret = dmar_table_init();
- if (ret) {
- pr_debug("dmar_table_init() failed with %d:\n", ret);
- goto ir_failed;
- }
-
if (!intr_remapping_supported()) {
pr_debug("intr-remapping not supported\n");
- goto ir_failed;
+ return 0;
}
-
if (!x2apic_preenabled && skip_ioapic_setup) {
pr_info("Skipped enabling intr-remap because of skipping "
"io-apic setup\n");
- return;
+ return 0;
}
+ if (enable_intr_remapping(x2apic_supported()))
+ return 0;
+
+ pr_info("Enabled Interrupt-remapping\n");
+
+ return 1;
+
+#endif
+ return 0;
+}
+
+void __init enable_IR_x2apic(void)
+{
+ unsigned long flags;
+ struct IO_APIC_route_entry **ioapic_entries = NULL;
+ int ret, x2apic_enabled = 0;
+ int dmar_table_init_ret = 0;
+
+#ifdef CONFIG_INTR_REMAP
+ dmar_table_init_ret = dmar_table_init();
+ if (dmar_table_init_ret)
+ pr_debug("dmar_table_init() failed with %d:\n",
+ dmar_table_init_ret);
+#endif
+
ioapic_entries = alloc_ioapic_entries();
if (!ioapic_entries) {
- pr_info("Allocate ioapic_entries failed: %d\n", ret);
- goto end;
+ pr_err("Allocate ioapic_entries failed\n");
+ goto out;
}
ret = save_IO_APIC_setup(ioapic_entries);
if (ret) {
pr_info("Saving IO-APIC state failed: %d\n", ret);
- goto end;
+ goto out;
}
local_irq_save(flags);
- mask_IO_APIC_setup(ioapic_entries);
mask_8259A();
+ mask_IO_APIC_setup(ioapic_entries);
- ret = enable_intr_remapping(x2apic_supported());
- if (ret)
- goto end_restore;
+ if (dmar_table_init_ret)
+ ret = 0;
+ else
+ ret = enable_IR();
- pr_info("Enabled Interrupt-remapping\n");
+ if (!ret) {
+ /* IR is required if there is APIC ID > 255 even when running
+ * under KVM
+ */
+ if (max_physical_apicid > 255 || !kvm_para_available())
+ goto nox2apic;
+ /*
+ * without IR all CPUs can be addressed by IOAPIC/MSI
+ * only in physical mode
+ */
+ x2apic_force_phys();
+ }
+
+ x2apic_enabled = 1;
if (x2apic_supported() && !x2apic_mode) {
x2apic_mode = 1;
@@ -1414,41 +1443,25 @@ void __init enable_IR_x2apic(void)
pr_info("Enabled x2apic\n");
}
-end_restore:
- if (ret)
- /*
- * IR enabling failed
- */
+nox2apic:
+ if (!ret) /* IR enabling failed */
restore_IO_APIC_setup(ioapic_entries);
-
unmask_8259A();
local_irq_restore(flags);
-end:
+out:
if (ioapic_entries)
free_ioapic_entries(ioapic_entries);
- if (!ret)
+ if (x2apic_enabled)
return;
-ir_failed:
if (x2apic_preenabled)
- panic("x2apic enabled by bios. But IR enabling failed");
+ panic("x2apic: enabled by BIOS but kernel init failed.");
else if (cpu_has_x2apic)
- pr_info("Not enabling x2apic,Intr-remapping\n");
-#else
- if (!cpu_has_x2apic)
- return;
-
- if (x2apic_preenabled)
- panic("x2apic enabled prior OS handover,"
- " enable CONFIG_X86_X2APIC, CONFIG_INTR_REMAP");
-#endif
-
- return;
+ pr_info("Not enabling x2apic, Intr-remapping init failed.\n");
}
-
#ifdef CONFIG_X86_64
/*
* Detect and enable local APICs on non-SMP boards.
@@ -1549,8 +1562,6 @@ no_apic:
#ifdef CONFIG_X86_64
void __init early_init_lapic_mapping(void)
{
- unsigned long phys_addr;
-
/*
* If no local APIC can be found then go out
* : it means there is no mpatable and MADT
@@ -1558,11 +1569,9 @@ void __init early_init_lapic_mapping(void)
if (!smp_found_config)
return;
- phys_addr = mp_lapic_addr;
-
- set_fixmap_nocache(FIX_APIC_BASE, phys_addr);
+ set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
- APIC_BASE, phys_addr);
+ APIC_BASE, mp_lapic_addr);
/*
* Fetch the APIC ID of the BSP in case we have a
@@ -1651,7 +1660,6 @@ int __init APIC_init_uniprocessor(void)
APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
pr_err("BIOS bug, local APIC 0x%x not detected!...\n",
boot_cpu_physical_apicid);
- clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
return -1;
}
#endif
diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index 8952a58..89174f8 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -167,7 +167,7 @@ static int es7000_apic_is_cluster(void)
{
/* MPENTIUMIII */
if (boot_cpu_data.x86 == 6 &&
- (boot_cpu_data.x86_model >= 7 || boot_cpu_data.x86_model <= 11))
+ (boot_cpu_data.x86_model >= 7 && boot_cpu_data.x86_model <= 11))
return 1;
return 0;
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index d2ed6c5..3c8f9e7 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -66,6 +66,8 @@
#include <asm/apic.h>
#define __apicdebuginit(type) static type __init
+#define for_each_irq_pin(entry, head) \
+ for (entry = head; entry; entry = entry->next)
/*
* Is the SiS APIC rmw bug present ?
@@ -85,6 +87,9 @@ int nr_ioapic_registers[MAX_IO_APICS];
struct mpc_ioapic mp_ioapics[MAX_IO_APICS];
int nr_ioapics;
+/* IO APIC gsi routing info */
+struct mp_ioapic_gsi mp_gsi_routing[MAX_IO_APICS];
+
/* MP IRQ source entries */
struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES];
@@ -116,15 +121,6 @@ static int __init parse_noapic(char *str)
}
early_param("noapic", parse_noapic);
-struct irq_pin_list;
-
-/*
- * This is performance-critical, we want to do it O(1)
- *
- * the indexing order of this array favors 1:1 mappings
- * between pins and IRQs.
- */
-
struct irq_pin_list {
int apic, pin;
struct irq_pin_list *next;
@@ -139,6 +135,11 @@ static struct irq_pin_list *get_one_free_irq_2_pin(int node)
return pin;
}
+/*
+ * This is performance-critical, we want to do it O(1)
+ *
+ * Most irqs are mapped 1:1 with pins.
+ */
struct irq_cfg {
struct irq_pin_list *irq_2_pin;
cpumask_var_t domain;
@@ -414,13 +415,10 @@ static bool io_apic_level_ack_pending(struct irq_cfg *cfg)
unsigned long flags;
spin_lock_irqsave(&ioapic_lock, flags);
- entry = cfg->irq_2_pin;
- for (;;) {
+ for_each_irq_pin(entry, cfg->irq_2_pin) {
unsigned int reg;
int pin;
- if (!entry)
- break;
pin = entry->pin;
reg = io_apic_read(entry->apic, 0x10 + pin*2);
/* Is the remote IRR bit set? */
@@ -428,9 +426,6 @@ static bool io_apic_level_ack_pending(struct irq_cfg *cfg)
spin_unlock_irqrestore(&ioapic_lock, flags);
return true;
}
- if (!entry->next)
- break;
- entry = entry->next;
}
spin_unlock_irqrestore(&ioapic_lock, flags);
@@ -498,72 +493,68 @@ static void ioapic_mask_entry(int apic, int pin)
* shared ISA-space IRQs, so we have to support them. We are super
* fast in the common case, and fast for shared ISA-space IRQs.
*/
-static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin)
+static int
+add_pin_to_irq_node_nopanic(struct irq_cfg *cfg, int node, int apic, int pin)
{
- struct irq_pin_list *entry;
+ struct irq_pin_list **last, *entry;
- entry = cfg->irq_2_pin;
- if (!entry) {
- entry = get_one_free_irq_2_pin(node);
- if (!entry) {
- printk(KERN_ERR "can not alloc irq_2_pin to add %d - %d\n",
- apic, pin);
- return;
- }
- cfg->irq_2_pin = entry;
- entry->apic = apic;
- entry->pin = pin;
- return;
- }
-
- while (entry->next) {
- /* not again, please */
+ /* don't allow duplicates */
+ last = &cfg->irq_2_pin;
+ for_each_irq_pin(entry, cfg->irq_2_pin) {
if (entry->apic == apic && entry->pin == pin)
- return;
-
- entry = entry->next;
+ return 0;
+ last = &entry->next;
}
- entry->next = get_one_free_irq_2_pin(node);
- entry = entry->next;
+ entry = get_one_free_irq_2_pin(node);
+ if (!entry) {
+ printk(KERN_ERR "can not alloc irq_pin_list (%d,%d,%d)\n",
+ node, apic, pin);
+ return -ENOMEM;
+ }
entry->apic = apic;
entry->pin = pin;
+
+ *last = entry;
+ return 0;
+}
+
+static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin)
+{
+ if (add_pin_to_irq_node_nopanic(cfg, node, apic, pin))
+ panic("IO-APIC: failed to add irq-pin. Can not proceed\n");
}
/*
* Reroute an IRQ to a different pin.
*/
static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node,
- int oldapic, int oldpin,
- int newapic, int newpin)
+ int oldapic, int oldpin,
+ int newapic, int newpin)
{
- struct irq_pin_list *entry = cfg->irq_2_pin;
- int replaced = 0;
+ struct irq_pin_list *entry;
- while (entry) {
+ for_each_irq_pin(entry, cfg->irq_2_pin) {
if (entry->apic == oldapic && entry->pin == oldpin) {
entry->apic = newapic;
entry->pin = newpin;
- replaced = 1;
/* every one is different, right? */
- break;
+ return;
}
- entry = entry->next;
}
- /* why? call replace before add? */
- if (!replaced)
- add_pin_to_irq_node(cfg, node, newapic, newpin);
+ /* old apic/pin didn't exist, so just add new ones */
+ add_pin_to_irq_node(cfg, node, newapic, newpin);
}
-static inline void io_apic_modify_irq(struct irq_cfg *cfg,
- int mask_and, int mask_or,
- void (*final)(struct irq_pin_list *entry))
+static void io_apic_modify_irq(struct irq_cfg *cfg,
+ int mask_and, int mask_or,
+ void (*final)(struct irq_pin_list *entry))
{
int pin;
struct irq_pin_list *entry;
- for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) {
+ for_each_irq_pin(entry, cfg->irq_2_pin) {
unsigned int reg;
pin = entry->pin;
reg = io_apic_read(entry->apic, 0x10 + pin * 2);
@@ -580,7 +571,6 @@ static void __unmask_IO_APIC_irq(struct irq_cfg *cfg)
io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED, 0, NULL);
}
-#ifdef CONFIG_X86_64
static void io_apic_sync(struct irq_pin_list *entry)
{
/*
@@ -596,11 +586,6 @@ static void __mask_IO_APIC_irq(struct irq_cfg *cfg)
{
io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, &io_apic_sync);
}
-#else /* CONFIG_X86_32 */
-static void __mask_IO_APIC_irq(struct irq_cfg *cfg)
-{
- io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, NULL);
-}
static void __mask_and_edge_IO_APIC_irq(struct irq_cfg *cfg)
{
@@ -613,7 +598,6 @@ static void __unmask_and_level_IO_APIC_irq(struct irq_cfg *cfg)
io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED,
IO_APIC_REDIR_LEVEL_TRIGGER, NULL);
}
-#endif /* CONFIG_X86_32 */
static void mask_IO_APIC_irq_desc(struct irq_desc *desc)
{
@@ -1702,12 +1686,8 @@ __apicdebuginit(void) print_IO_APIC(void)
if (!entry)
continue;
printk(KERN_DEBUG "IRQ%d ", irq);
- for (;;) {
+ for_each_irq_pin(entry, cfg->irq_2_pin)
printk("-> %d:%d", entry->apic, entry->pin);
- if (!entry->next)
- break;
- entry = entry->next;
- }
printk("\n");
}
@@ -2211,7 +2191,6 @@ static unsigned int startup_ioapic_irq(unsigned int irq)
return was_pending;
}
-#ifdef CONFIG_X86_64
static int ioapic_retrigger_irq(unsigned int irq)
{
@@ -2224,14 +2203,6 @@ static int ioapic_retrigger_irq(unsigned int irq)
return 1;
}
-#else
-static int ioapic_retrigger_irq(unsigned int irq)
-{
- apic->send_IPI_self(irq_cfg(irq)->vector);
-
- return 1;
-}
-#endif
/*
* Level and edge triggered IO-APIC interrupts need different handling,
@@ -2269,13 +2240,9 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq
struct irq_pin_list *entry;
u8 vector = cfg->vector;
- entry = cfg->irq_2_pin;
- for (;;) {
+ for_each_irq_pin(entry, cfg->irq_2_pin) {
unsigned int reg;
- if (!entry)
- break;
-
apic = entry->apic;
pin = entry->pin;
/*
@@ -2288,9 +2255,6 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq
reg &= ~IO_APIC_REDIR_VECTOR_MASK;
reg |= vector;
io_apic_modify(apic, 0x10 + pin*2, reg);
- if (!entry->next)
- break;
- entry = entry->next;
}
}
@@ -2515,11 +2479,8 @@ atomic_t irq_mis_count;
static void ack_apic_level(unsigned int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
-
-#ifdef CONFIG_X86_32
unsigned long v;
int i;
-#endif
struct irq_cfg *cfg;
int do_unmask_irq = 0;
@@ -2532,31 +2493,28 @@ static void ack_apic_level(unsigned int irq)
}
#endif
-#ifdef CONFIG_X86_32
/*
- * It appears there is an erratum which affects at least version 0x11
- * of I/O APIC (that's the 82093AA and cores integrated into various
- * chipsets). Under certain conditions a level-triggered interrupt is
- * erroneously delivered as edge-triggered one but the respective IRR
- * bit gets set nevertheless. As a result the I/O unit expects an EOI
- * message but it will never arrive and further interrupts are blocked
- * from the source. The exact reason is so far unknown, but the
- * phenomenon was observed when two consecutive interrupt requests
- * from a given source get delivered to the same CPU and the source is
- * temporarily disabled in between.
- *
- * A workaround is to simulate an EOI message manually. We achieve it
- * by setting the trigger mode to edge and then to level when the edge
- * trigger mode gets detected in the TMR of a local APIC for a
- * level-triggered interrupt. We mask the source for the time of the
- * operation to prevent an edge-triggered interrupt escaping meanwhile.
- * The idea is from Manfred Spraul. --macro
- */
+ * It appears there is an erratum which affects at least version 0x11
+ * of I/O APIC (that's the 82093AA and cores integrated into various
+ * chipsets). Under certain conditions a level-triggered interrupt is
+ * erroneously delivered as edge-triggered one but the respective IRR
+ * bit gets set nevertheless. As a result the I/O unit expects an EOI
+ * message but it will never arrive and further interrupts are blocked
+ * from the source. The exact reason is so far unknown, but the
+ * phenomenon was observed when two consecutive interrupt requests
+ * from a given source get delivered to the same CPU and the source is
+ * temporarily disabled in between.
+ *
+ * A workaround is to simulate an EOI message manually. We achieve it
+ * by setting the trigger mode to edge and then to level when the edge
+ * trigger mode gets detected in the TMR of a local APIC for a
+ * level-triggered interrupt. We mask the source for the time of the
+ * operation to prevent an edge-triggered interrupt escaping meanwhile.
+ * The idea is from Manfred Spraul. --macro
+ */
cfg = desc->chip_data;
i = cfg->vector;
-
v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1));
-#endif
/*
* We must acknowledge the irq before we move it or the acknowledge will
@@ -2598,7 +2556,7 @@ static void ack_apic_level(unsigned int irq)
unmask_IO_APIC_irq_desc(desc);
}
-#ifdef CONFIG_X86_32
+ /* Tail end of version 0x11 I/O APIC bug workaround */
if (!(v & (1 << (i & 0x1f)))) {
atomic_inc(&irq_mis_count);
spin_lock(&ioapic_lock);
@@ -2606,26 +2564,15 @@ static void ack_apic_level(unsigned int irq)
__unmask_and_level_IO_APIC_irq(cfg);
spin_unlock(&ioapic_lock);
}
-#endif
}
#ifdef CONFIG_INTR_REMAP
static void __eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
{
- int apic, pin;
struct irq_pin_list *entry;
- entry = cfg->irq_2_pin;
- for (;;) {
-
- if (!entry)
- break;
-
- apic = entry->apic;
- pin = entry->pin;
- io_apic_eoi(apic, pin);
- entry = entry->next;
- }
+ for_each_irq_pin(entry, cfg->irq_2_pin)
+ io_apic_eoi(entry->apic, entry->pin);
}
static void
@@ -3241,8 +3188,7 @@ void destroy_irq(unsigned int irq)
cfg = desc->chip_data;
dynamic_irq_cleanup(irq);
/* connect back irq_cfg */
- if (desc)
- desc->chip_data = cfg;
+ desc->chip_data = cfg;
free_irte(irq);
spin_lock_irqsave(&vector_lock, flags);
@@ -3912,7 +3858,11 @@ static int __io_apic_set_pci_routing(struct device *dev, int irq,
*/
if (irq >= NR_IRQS_LEGACY) {
cfg = desc->chip_data;
- add_pin_to_irq_node(cfg, node, ioapic, pin);
+ if (add_pin_to_irq_node_nopanic(cfg, node, ioapic, pin)) {
+ printk(KERN_INFO "can not add pin %d for irq %d\n",
+ pin, irq);
+ return 0;
+ }
}
setup_IO_APIC_irq(ioapic, pin, irq, desc, trigger, polarity);
@@ -3941,11 +3891,28 @@ int io_apic_set_pci_routing(struct device *dev, int irq,
return __io_apic_set_pci_routing(dev, irq, irq_attr);
}
-/* --------------------------------------------------------------------------
- ACPI-based IOAPIC Configuration
- -------------------------------------------------------------------------- */
+u8 __init io_apic_unique_id(u8 id)
+{
+#ifdef CONFIG_X86_32
+ if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
+ !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
+ return io_apic_get_unique_id(nr_ioapics, id);
+ else
+ return id;
+#else
+ int i;
+ DECLARE_BITMAP(used, 256);
-#ifdef CONFIG_ACPI
+ bitmap_zero(used, 256);
+ for (i = 0; i < nr_ioapics; i++) {
+ struct mpc_ioapic *ia = &mp_ioapics[i];
+ __set_bit(ia->apicid, used);
+ }
+ if (!test_bit(id, used))
+ return id;
+ return find_first_zero_bit(used, 256);
+#endif
+}
#ifdef CONFIG_X86_32
int __init io_apic_get_unique_id(int ioapic, int apic_id)
@@ -4054,8 +4021,6 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
return 0;
}
-#endif /* CONFIG_ACPI */
-
/*
* This function currently is only a helper for the i386 smp boot process where
* we need to reprogram the ioredtbls to cater for the cpus which have come online
@@ -4109,7 +4074,7 @@ void __init setup_ioapic_dest(void)
static struct resource *ioapic_resources;
-static struct resource * __init ioapic_setup_resources(void)
+static struct resource * __init ioapic_setup_resources(int nr_ioapics)
{
unsigned long n;
struct resource *res;
@@ -4125,15 +4090,13 @@ static struct resource * __init ioapic_setup_resources(void)
mem = alloc_bootmem(n);
res = (void *)mem;
- if (mem != NULL) {
- mem += sizeof(struct resource) * nr_ioapics;
+ mem += sizeof(struct resource) * nr_ioapics;
- for (i = 0; i < nr_ioapics; i++) {
- res[i].name = mem;
- res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
- sprintf(mem, "IOAPIC %u", i);
- mem += IOAPIC_RESOURCE_NAME_SIZE;
- }
+ for (i = 0; i < nr_ioapics; i++) {
+ res[i].name = mem;
+ res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ sprintf(mem, "IOAPIC %u", i);
+ mem += IOAPIC_RESOURCE_NAME_SIZE;
}
ioapic_resources = res;
@@ -4147,7 +4110,7 @@ void __init ioapic_init_mappings(void)
struct resource *ioapic_res;
int i;
- ioapic_res = ioapic_setup_resources();
+ ioapic_res = ioapic_setup_resources(nr_ioapics);
for (i = 0; i < nr_ioapics; i++) {
if (smp_found_config) {
ioapic_phys = mp_ioapics[i].apicaddr;
@@ -4176,11 +4139,9 @@ fake_ioapic_page:
__fix_to_virt(idx), ioapic_phys);
idx++;
- if (ioapic_res != NULL) {
- ioapic_res->start = ioapic_phys;
- ioapic_res->end = ioapic_phys + (4 * 1024) - 1;
- ioapic_res++;
- }
+ ioapic_res->start = ioapic_phys;
+ ioapic_res->end = ioapic_phys + (4 * 1024) - 1;
+ ioapic_res++;
}
}
@@ -4201,3 +4162,76 @@ void __init ioapic_insert_resources(void)
r++;
}
}
+
+int mp_find_ioapic(int gsi)
+{
+ int i = 0;
+
+ /* Find the IOAPIC that manages this GSI. */
+ for (i = 0; i < nr_ioapics; i++) {
+ if ((gsi >= mp_gsi_routing[i].gsi_base)
+ && (gsi <= mp_gsi_routing[i].gsi_end))
+ return i;
+ }
+
+ printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
+ return -1;
+}
+
+int mp_find_ioapic_pin(int ioapic, int gsi)
+{
+ if (WARN_ON(ioapic == -1))
+ return -1;
+ if (WARN_ON(gsi > mp_gsi_routing[ioapic].gsi_end))
+ return -1;
+
+ return gsi - mp_gsi_routing[ioapic].gsi_base;
+}
+
+static int bad_ioapic(unsigned long address)
+{
+ if (nr_ioapics >= MAX_IO_APICS) {
+ printk(KERN_WARNING "WARING: Max # of I/O APICs (%d) exceeded "
+ "(found %d), skipping\n", MAX_IO_APICS, nr_ioapics);
+ return 1;
+ }
+ if (!address) {
+ printk(KERN_WARNING "WARNING: Bogus (zero) I/O APIC address"
+ " found in table, skipping!\n");
+ return 1;
+ }
+ return 0;
+}
+
+void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
+{
+ int idx = 0;
+
+ if (bad_ioapic(address))
+ return;
+
+ idx = nr_ioapics;
+
+ mp_ioapics[idx].type = MP_IOAPIC;
+ mp_ioapics[idx].flags = MPC_APIC_USABLE;
+ mp_ioapics[idx].apicaddr = address;
+
+ set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
+ mp_ioapics[idx].apicid = io_apic_unique_id(id);
+ mp_ioapics[idx].apicver = io_apic_get_version(idx);
+
+ /*
+ * Build basic GSI lookup table to facilitate gsi->io_apic lookups
+ * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
+ */
+ mp_gsi_routing[idx].gsi_base = gsi_base;
+ mp_gsi_routing[idx].gsi_end = gsi_base +
+ io_apic_get_redir_entries(idx);
+
+ printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
+ "GSI %d-%d\n", idx, mp_ioapics[idx].apicid,
+ mp_ioapics[idx].apicver, mp_ioapics[idx].apicaddr,
+ mp_gsi_routing[idx].gsi_base, mp_gsi_routing[idx].gsi_end);
+
+ nr_ioapics++;
+}
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index bc3e880..f3b1037 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -50,11 +50,11 @@ static struct apic *apic_probe[] __initdata = {
void __init default_setup_apic_routing(void)
{
#ifdef CONFIG_X86_X2APIC
- if (x2apic_mode && (apic != &apic_x2apic_phys &&
+ if (x2apic_mode
#ifdef CONFIG_X86_UV
- apic != &apic_x2apic_uv_x &&
+ && apic != &apic_x2apic_uv_x
#endif
- apic != &apic_x2apic_cluster)) {
+ ) {
if (x2apic_phys)
apic = &apic_x2apic_phys;
else
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 651c93b..fcd513b 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -482,11 +482,11 @@ static void __init construct_ioapic_table(int mpc_default_type)
MP_bus_info(&bus);
}
- ioapic.type = MP_IOAPIC;
- ioapic.apicid = 2;
- ioapic.apicver = mpc_default_type > 4 ? 0x10 : 0x01;
- ioapic.flags = MPC_APIC_USABLE;
- ioapic.apicaddr = 0xFEC00000;
+ ioapic.type = MP_IOAPIC;
+ ioapic.apicid = 2;
+ ioapic.apicver = mpc_default_type > 4 ? 0x10 : 0x01;
+ ioapic.flags = MPC_APIC_USABLE;
+ ioapic.apicaddr = IO_APIC_DEFAULT_PHYS_BASE;
MP_ioapic_info(&ioapic);
/*
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists