| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 14 Sep 2009 16:07:37 -0400
From: Mike Frysinger <vapier@...too.org>
To: linux-kernel@...r.kernel.org
Cc: uclinux-dist-devel@...ckfin.uclinux.org,
Barry Song <barry.song@...log.com>
Subject: [PATCH 33/72] Blackfin: bf537-stamp: update AD714x resources
From: Barry Song <barry.song@...log.com>
Push the device table to the board resources as data interpretation can be
changed on a per-board basis.
Signed-off-by: Barry Song <barry.song@...log.com>
Signed-off-by: Mike Frysinger <vapier@...too.org>
---
arch/blackfin/mach-bf537/boards/stamp.c | 133 ++++++++++++++++++++++++++++++-
1 files changed, 131 insertions(+), 2 deletions(-)
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 72d11de..e5fffe7 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -540,6 +540,120 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
};
#endif
+#if defined(CONFIG_INPUT_EVAL_AD7147EBZ)
+#include <linux/input.h>
+#include <linux/input/ad714x.h>
+static struct bfin5xx_spi_chip ad7147_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+
+static struct ad714x_slider_plat slider_plat[] = {
+ {
+ .start_stage = 0,
+ .end_stage = 7,
+ .max_coord = 128,
+ },
+};
+
+static struct ad714x_button_plat button_plat[] = {
+ {
+ .keycode = BTN_FORWARD,
+ .l_mask = 0,
+ .h_mask = 0x600,
+ },
+ {
+ .keycode = BTN_LEFT,
+ .l_mask = 0,
+ .h_mask = 0x500,
+ },
+ {
+ .keycode = BTN_MIDDLE,
+ .l_mask = 0,
+ .h_mask = 0x800,
+ },
+ {
+ .keycode = BTN_RIGHT,
+ .l_mask = 0x100,
+ .h_mask = 0x400,
+ },
+ {
+ .keycode = BTN_BACK,
+ .l_mask = 0x200,
+ .h_mask = 0x400,
+ },
+};
+static struct ad714x_platform_data ad7147_platfrom_data = {
+ .slider_num = 1,
+ .button_num = 5,
+ .slider = slider_plat,
+ .button = button_plat,
+ .stage_cfg_reg = {
+ {0xFBFF, 0x1FFF, 0, 0x2626, 1600, 1600, 1600, 1600},
+ {0xEFFF, 0x1FFF, 0, 0x2626, 1650, 1650, 1650, 1650},
+ {0xFFFF, 0x1FFE, 0, 0x2626, 1650, 1650, 1650, 1650},
+ {0xFFFF, 0x1FFB, 0, 0x2626, 1650, 1650, 1650, 1650},
+ {0xFFFF, 0x1FEF, 0, 0x2626, 1650, 1650, 1650, 1650},
+ {0xFFFF, 0x1FBF, 0, 0x2626, 1650, 1650, 1650, 1650},
+ {0xFFFF, 0x1EFF, 0, 0x2626, 1650, 1650, 1650, 1650},
+ {0xFFFF, 0x1BFF, 0, 0x2626, 1600, 1600, 1600, 1600},
+ {0xFF7B, 0x3FFF, 0x506, 0x2626, 1100, 1100, 1150, 1150},
+ {0xFDFE, 0x3FFF, 0x606, 0x2626, 1100, 1100, 1150, 1150},
+ {0xFEBA, 0x1FFF, 0x1400, 0x2626, 1200, 1200, 1300, 1300},
+ {0xFFEF, 0x1FFF, 0x0, 0x2626, 1100, 1100, 1150, 1150},
+ },
+ .sys_cfg_reg = {0x2B2, 0x0, 0x3233, 0x819, 0x832, 0xCFF, 0xCFF, 0x0},
+};
+#endif
+
+#if defined(CONFIG_INPUT_EVAL_AD7142EB)
+#include <linux/input.h>
+#include <linux/input/ad714x.h>
+static struct ad714x_button_plat button_plat[] = {
+ {
+ .keycode = BTN_1,
+ .l_mask = 0,
+ .h_mask = 0x1,
+ },
+ {
+ .keycode = BTN_2,
+ .l_mask = 0,
+ .h_mask = 0x2,
+ },
+ {
+ .keycode = BTN_3,
+ .l_mask = 0,
+ .h_mask = 0x4,
+ },
+ {
+ .keycode = BTN_4,
+ .l_mask = 0x0,
+ .h_mask = 0x8,
+ },
+};
+static struct ad714x_platform_data ad7142_platfrom_data = {
+ .button_num = 4,
+ .button = button_plat,
+ .stage_cfg_reg = {
+ /* fixme: figure out right setting for all comoponent according
+ * to hardware feature of EVAL-AD7142EB board */
+ {0xE7FF, 0x3FFF, 0x0005, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
+ {0xFDBF, 0x3FFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
+ {0xFFFF, 0x2DFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
+ {0xFFFF, 0x37BF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
+ {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+ {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+ {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+ {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+ {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+ {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+ {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+ {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+ },
+ .sys_cfg_reg = {0x0B2, 0x0, 0x690, 0x664, 0x290F, 0xF, 0xF, 0x0},
+};
+#endif
+
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#define MMC_SPI_CARD_DETECT_INT IRQ_PF5
@@ -784,6 +898,20 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.controller_data = &ad9960_spi_chip_info,
},
#endif
+
+#if defined(CONFIG_INPUT_EVAL_AD7147EBZ)
+ {
+ .modalias = "ad714x_captouch",
+ .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
+ .irq = IRQ_PF4,
+ .bus_num = 0,
+ .chip_select = 5,
+ .mode = SPI_MODE_3,
+ .platform_data = &ad7147_platfrom_data,
+ .controller_data = &ad7147_spi_chip_info,
+ },
+#endif
+
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "mmc_spi",
@@ -1337,10 +1465,11 @@ static struct adp5520_platform_data adp5520_pdev_data = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
+#if defined(CONFIG_INPUT_EVAL_AD7142EB)
{
- I2C_BOARD_INFO("ad7142_joystick", 0x2C),
+ I2C_BOARD_INFO("ad7142_captouch", 0x2C),
.irq = IRQ_PG5,
+ .platform_data = (void *)&ad7142_platfrom_data,
},
#endif
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
--
1.6.4.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists