[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-rc9 (root@natasha) (gcc version 4.3.4 (Debian 4.3.4-2) ) #2 SMP Wed Sep 9 08:08:59 MDT 2009 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-rc9 root=UUID=272a1709-267d-4134-a6b4-e8d3884dca37 ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfde0000 (usable) [ 0.000000] BIOS-e820: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfde3000 - 00000000cfdf0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfdf0000 - 00000000cfe00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable [ 0.000000] 4 base 000100000000 mask FFFFE0000000 write-back [ 0.000000] 5 base 000120000000 mask FFFFF0000000 write-back [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000130000000 aka 4864M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcfde0 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfde0000 [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfc00000 page 2M [ 0.000000] 00cfc00000 - 00cfde0000 page 4k [ 0.000000] kernel direct mapping tables up to cfde0000 @ 8000-b000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ a000-c000 [ 0.000000] RAMDISK: 376f1000 - 37fefd50 [ 0.000000] ACPI: RSDP 00000000000f7550 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000cfde3000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000cfde3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000cfde30c0 0731E (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000cfde0000 00040 [ 0.000000] ACPI: SSDT 00000000cfdea4c0 0088C (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 00000000cfdead80 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000cfdeadc0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: TAMG 00000000cfdeae00 0030A (v01 GBT GBT B0 5455312E BG 53450101) [ 0.000000] ACPI: APIC 00000000cfdea400 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000130000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [000000000000b000 - 0000000000012fff] [ 0.000000] bootmap [0000000000013000 - 0000000000038fff] pages 26 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001623dac] TEXT DATA BSS ==> [0001000000 - 0001623dac] [ 0.000000] #3 [00376f1000 - 0037fefd50] RAMDISK ==> [00376f1000 - 0037fefd50] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [0001624000 - 0001624106] BRK ==> [0001624000 - 0001624106] [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000] [ 0.000000] found SMP MP-table at [ffff8800000f5b40] f5b40 [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfde0 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1047935 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3841 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833048 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfde0000 - 00000000cfde3000 [ 0.000000] PM: Registered nosave memory: 00000000cfde3000 - 00000000cfdf0000 [ 0.000000] PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfe00000 [ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000) [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages at ffff880028022000, static data 86368 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030809 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-rc9 root=UUID=272a1709-267d-4134-a6b4-e8d3884dca37 ro [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 8d2c000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 4050584k/4980736k available (2944k kernel code, 788996k absent, 141156k reserved, 1640k data, 584k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2611.766 MHz processor. [ 0.000010] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] hpet clockevent registered [ 0.004000] alloc irq_desc for 24 on node 0 [ 0.004000] alloc kstat_irqs on node 0 [ 0.004000] HPET: 4 timers in total, 1 timers will be used for per-cpu timer [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5223.52 BogoMIPS (lpj=10447048) [ 0.004169] Security Framework initialized [ 0.004225] SELinux: Disabled at boot. [ 0.004502] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.005671] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.006221] Mount-cache hash table entries: 256 [ 0.006374] Initializing cgroup subsys ns [ 0.006429] Initializing cgroup subsys cpuacct [ 0.006485] Initializing cgroup subsys devices [ 0.006539] Initializing cgroup subsys freezer [ 0.006595] Initializing cgroup subsys net_cls [ 0.006665] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.006722] CPU: L2 Cache: 512K (64 bytes/line) [ 0.006778] CPU 0/0x0 -> Node 0 [ 0.006832] tseg: 00cfe00000 [ 0.006833] CPU: Physical Processor ID: 0 [ 0.006887] CPU: Processor Core ID: 0 [ 0.006941] mce: CPU supports 6 MCE banks [ 0.007000] using C1E aware idle routine [ 0.007054] Performance Counters: AMD PMU driver. [ 0.007151] ... version: 0 [ 0.007205] ... bit width: 48 [ 0.007258] ... generic counters: 4 [ 0.007312] ... value mask: 0000ffffffffffff [ 0.007367] ... max period: 00007fffffffffff [ 0.007423] ... fixed-purpose counters: 0 [ 0.007476] ... counter mask: 000000000000000f [ 0.008232] ACPI: Core revision 20090521 [ 0.020059] Setting APIC routing to flat [ 0.020593] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.062906] CPU0: AMD Phenom(tm) II X4 810 Processor stepping 02 [ 0.064001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 5223.83 BogoMIPS (lpj=10447671) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 1/0x1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.148742] CPU1: AMD Phenom(tm) II X4 810 Processor stepping 02 [ 0.149373] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.152017] System has AMD C1E enabled [ 0.152067] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.152140] Switch to broadcast mode on CPU1 [ 0.004000] Initializing CPU#2 [ 0.004000] Calibrating delay using timer specific routine.. 5223.82 BogoMIPS (lpj=10447655) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 2/0x2 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 2 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.244673] CPU2: AMD Phenom(tm) II X4 810 Processor stepping 02 [ 0.245304] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.248018] Switch to broadcast mode on CPU2 [ 0.248073] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.004000] Initializing CPU#3 [ 0.004000] Calibrating delay using timer specific routine.. 5223.83 BogoMIPS (lpj=10447677) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 3/0x3 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 3 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.340711] CPU3: AMD Phenom(tm) II X4 810 Processor stepping 02 [ 0.341341] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.344022] Brought up 4 CPUs [ 0.344022] Switch to broadcast mode on CPU3 [ 0.344129] Total of 4 processors activated (20895.02 BogoMIPS). [ 0.344293] CPU0 attaching sched-domain: [ 0.344295] domain 0: span 0-3 level MC [ 0.344297] groups: 0 1 2 3 [ 0.344302] CPU1 attaching sched-domain: [ 0.344304] domain 0: span 0-3 level MC [ 0.344305] groups: 1 2 3 0 [ 0.344309] CPU2 attaching sched-domain: [ 0.344310] domain 0: span 0-3 level MC [ 0.344312] groups: 2 3 0 1 [ 0.344316] CPU3 attaching sched-domain: [ 0.344317] domain 0: span 0-3 level MC [ 0.344318] groups: 3 0 1 2 [ 0.344381] Switch to broadcast mode on CPU0 [ 0.344381] Booting paravirtualized kernel on bare hardware [ 0.344381] regulator: core version 0.5 [ 0.344381] NET: Registered protocol family 16 [ 0.344381] node 0 link 0: io port [a000, ffff] [ 0.344381] TOM: 00000000d0000000 aka 3328M [ 0.344381] Fam 10h mmconf [e0000000, e00fffff] [ 0.344381] node 0 link 0: mmio [a0000, bffff] [ 0.344381] node 0 link 0: mmio [d0000000, dfffffff] [ 0.344381] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.344381] node 0 link 0: mmio [e0000000, e05fffff] ==> [e0100000, e05fffff] [ 0.344381] TOM2: 0000000130000000 aka 4864M [ 0.344381] bus: [00,05] on node 0 link 0 [ 0.344381] bus: 00 index 0 io port: [0, ffff] [ 0.344381] bus: 00 index 1 mmio: [a0000, bffff] [ 0.344381] bus: 00 index 2 mmio: [d0000000, dfffffff] [ 0.344381] bus: 00 index 3 mmio: [e0600000, ffffffff] [ 0.344381] bus: 00 index 4 mmio: [e0100000, e05fffff] [ 0.344381] bus: 00 index 5 mmio: [130000000, fcffffffff] [ 0.344381] ACPI: bus type pci registered [ 0.344381] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.344381] PCI: MCFG area at e0000000 reserved in E820 [ 0.351426] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.351482] PCI: Using configuration type 1 for base access [ 0.352108] bio: create slab at 0 [ 0.352322] ACPI: EC: Look up EC in DSDT [ 0.360448] ACPI: Interpreter enabled [ 0.360505] ACPI: (supports S0 S3 S4 S5) [ 0.360739] ACPI: Using IOAPIC for interrupt routing [ 0.364369] ACPI: No dock devices found. [ 0.364369] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.364394] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff] [ 0.364394] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.364394] pci 0000:00:02.0: PME# disabled [ 0.364394] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.364394] pci 0000:00:07.0: PME# disabled [ 0.364394] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.364394] pci 0000:00:09.0: PME# disabled [ 0.364468] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold [ 0.364525] pci 0000:00:0b.0: PME# disabled [ 0.364620] pci 0000:00:11.0: reg 10 io port: [0xff00-0xff07] [ 0.364627] pci 0000:00:11.0: reg 14 io port: [0xfe00-0xfe03] [ 0.364633] pci 0000:00:11.0: reg 18 io port: [0xfd00-0xfd07] [ 0.364639] pci 0000:00:11.0: reg 1c io port: [0xfc00-0xfc03] [ 0.364644] pci 0000:00:11.0: reg 20 io port: [0xfb00-0xfb0f] [ 0.364651] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f3ff] [ 0.364698] pci 0000:00:12.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff] [ 0.364747] pci 0000:00:12.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.364813] pci 0000:00:12.2: reg 10 32bit mmio: [0xfe02c000-0xfe02c0ff] [ 0.364860] pci 0000:00:12.2: supports D1 D2 [ 0.364861] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.364919] pci 0000:00:12.2: PME# disabled [ 0.365001] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff] [ 0.365049] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02a000-0xfe02afff] [ 0.365115] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe029000-0xfe0290ff] [ 0.365162] pci 0000:00:13.2: supports D1 D2 [ 0.365163] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.365221] pci 0000:00:13.2: PME# disabled [ 0.365378] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] [ 0.365384] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] [ 0.365390] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.365396] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.365402] pci 0000:00:14.1: reg 20 io port: [0xfa00-0xfa0f] [ 0.365461] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe024000-0xfe027fff] [ 0.365500] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.365558] pci 0000:00:14.2: PME# disabled [ 0.365706] pci 0000:00:14.5: reg 10 32bit mmio: [0xfe028000-0xfe028fff] [ 0.365823] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.365831] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] [ 0.365838] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] [ 0.365843] pci 0000:01:00.0: reg 24 io port: [0xcf00-0xcf7f] [ 0.365848] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.365910] pci 0000:00:02.0: bridge io port: [0xc000-0xcfff] [ 0.365912] pci 0000:00:02.0: bridge 32bit mmio: [0xf8000000-0xfbffffff] [ 0.365915] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.365946] pci 0000:02:00.0: reg 10 io port: [0xbe00-0xbeff] [ 0.365959] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdbff000-0xfdbfffff] [ 0.365969] pci 0000:02:00.0: reg 20 64bit mmio: [0xfdbf8000-0xfdbfbfff] [ 0.365975] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.366001] pci 0000:02:00.0: supports D1 D2 [ 0.366003] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.366061] pci 0000:02:00.0: PME# disabled [ 0.368023] pci 0000:00:07.0: bridge io port: [0xb000-0xbfff] [ 0.368025] pci 0000:00:07.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff] [ 0.368028] pci 0000:00:07.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff] [ 0.368059] pci 0000:03:00.0: reg 10 io port: [0xee00-0xeeff] [ 0.368072] pci 0000:03:00.0: reg 18 64bit mmio: [0xfdfff000-0xfdffffff] [ 0.368082] pci 0000:03:00.0: reg 20 64bit mmio: [0xfdff8000-0xfdffbfff] [ 0.368088] pci 0000:03:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.368114] pci 0000:03:00.0: supports D1 D2 [ 0.368115] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.368174] pci 0000:03:00.0: PME# disabled [ 0.368279] pci 0000:00:09.0: bridge io port: [0xe000-0xefff] [ 0.368282] pci 0000:00:09.0: bridge 32bit mmio: [0xfd800000-0xfd8fffff] [ 0.368285] pci 0000:00:09.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff] [ 0.368319] pci 0000:04:00.0: reg 18 io port: [0xdf00-0xdf7f] [ 0.368331] pci 0000:04:00.0: reg 20 64bit mmio: [0xfdef0000-0xfdefffff] [ 0.368336] pci 0000:04:00.0: reg 30 32bit mmio: [0x000000-0x03ffff] [ 0.368357] pci 0000:04:00.0: supports D1 [ 0.368358] pci 0000:04:00.0: PME# supported from D0 D1 D3hot [ 0.368415] pci 0000:04:00.0: PME# disabled [ 0.368513] pci 0000:00:0b.0: bridge io port: [0xd000-0xdfff] [ 0.368515] pci 0000:00:0b.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.368519] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff] [ 0.368580] pci 0000:05:0e.0: reg 10 32bit mmio: [0xfdaff000-0xfdaff7ff] [ 0.368588] pci 0000:05:0e.0: reg 14 32bit mmio: [0xfdaf8000-0xfdafbfff] [ 0.368642] pci 0000:05:0e.0: supports D1 D2 [ 0.368643] pci 0000:05:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.368702] pci 0000:05:0e.0: PME# disabled [ 0.368787] pci 0000:00:14.4: transparent bridge [ 0.368843] pci 0000:00:14.4: bridge io port: [0xa000-0xafff] [ 0.368847] pci 0000:00:14.4: bridge 32bit mmio: [0xfda00000-0xfdafffff] [ 0.368851] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfd900000-0xfd9fffff] [ 0.368866] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.369104] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.369176] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.369228] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] [ 0.369274] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT] [ 0.369320] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEB._PRT] [ 0.388828] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.388828] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.389253] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.389846] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.392302] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.392895] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.393488] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.394081] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.394635] usbcore: registered new interface driver usbfs [ 0.394635] usbcore: registered new interface driver hub [ 0.394635] usbcore: registered new device driver usb [ 0.394635] PCI: Using ACPI for IRQ routing [ 0.394635] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff] [ 0.394635] pci 0000:00:00.0: BAR 3: can't allocate resource [ 0.408117] PCI-DMA: Disabling AGP. [ 0.408215] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.408215] PCI-DMA: using GART IOMMU. [ 0.408215] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.409515] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0 [ 0.409780] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.416029] hpet: hpet2 irq 24 for MSI [ 0.452132] pnp: PnP ACPI init [ 0.452198] ACPI: bus type pnp registered [ 0.454894] pnp 00:0d: mem resource (0xd2c00-0xd3fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.454963] pnp 00:0d: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.455032] pnp 00:0d: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.455100] pnp 00:0d: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.455169] pnp 00:0d: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.455237] pnp 00:0d: mem resource (0x100000-0xcfddffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.455434] pnp: PnP ACPI: found 14 devices [ 0.455488] ACPI: ACPI bus type pnp unregistered [ 0.455549] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.455606] system 00:01: ioport range 0x220-0x225 has been reserved [ 0.455663] system 00:01: ioport range 0x290-0x294 has been reserved [ 0.455723] system 00:02: ioport range 0x4100-0x411f has been reserved [ 0.455780] system 00:02: ioport range 0x228-0x22f has been reserved [ 0.455837] system 00:02: ioport range 0x40b-0x40b has been reserved [ 0.455893] system 00:02: ioport range 0x4d6-0x4d6 has been reserved [ 0.455950] system 00:02: ioport range 0xc00-0xc01 has been reserved [ 0.456010] system 00:02: ioport range 0xc14-0xc14 has been reserved [ 0.456067] system 00:02: ioport range 0xc50-0xc52 has been reserved [ 0.456123] system 00:02: ioport range 0xc6c-0xc6d has been reserved [ 0.456180] system 00:02: ioport range 0xc6f-0xc6f has been reserved [ 0.456237] system 00:02: ioport range 0xcd0-0xcd1 has been reserved [ 0.456293] system 00:02: ioport range 0xcd2-0xcd3 has been reserved [ 0.456350] system 00:02: ioport range 0xcd4-0xcdf has been reserved [ 0.456407] system 00:02: ioport range 0x4000-0x40fe has been reserved [ 0.456463] system 00:02: ioport range 0x4210-0x4217 has been reserved [ 0.456520] system 00:02: ioport range 0xb00-0xb0f has been reserved [ 0.456577] system 00:02: ioport range 0xb10-0xb1f has been reserved [ 0.456634] system 00:02: ioport range 0xb20-0xb3f has been reserved [ 0.456694] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved [ 0.456754] system 00:0d: iomem range 0xcfde0000-0xcfdfffff could not be reserved [ 0.456820] system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved [ 0.456878] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.456944] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.457001] system 00:0d: iomem range 0xfff80000-0xfffeffff has been reserved [ 0.462011] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 0.462068] pci 0000:00:02.0: IO window: 0xc000-0xcfff [ 0.462124] pci 0000:00:02.0: MEM window: 0xf8000000-0xfbffffff [ 0.462181] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.462249] pci 0000:00:07.0: PCI bridge, secondary bus 0000:02 [ 0.462306] pci 0000:00:07.0: IO window: 0xb000-0xbfff [ 0.462362] pci 0000:00:07.0: MEM window: 0xfdc00000-0xfdcfffff [ 0.462418] pci 0000:00:07.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff [ 0.462486] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03 [ 0.462542] pci 0000:00:09.0: IO window: 0xe000-0xefff [ 0.462598] pci 0000:00:09.0: MEM window: 0xfd800000-0xfd8fffff [ 0.462655] pci 0000:00:09.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff [ 0.462722] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04 [ 0.462778] pci 0000:00:0b.0: IO window: 0xd000-0xdfff [ 0.462834] pci 0000:00:0b.0: MEM window: 0xfde00000-0xfdefffff [ 0.462891] pci 0000:00:0b.0: PREFETCH window: 0x000000fdd00000-0x000000fddfffff [ 0.462958] pci 0000:00:14.4: PCI bridge, secondary bus 0000:05 [ 0.463015] pci 0000:00:14.4: IO window: 0xa000-0xafff [ 0.463073] pci 0000:00:14.4: MEM window: 0xfda00000-0xfdafffff [ 0.463131] pci 0000:00:14.4: PREFETCH window: 0xfd900000-0xfd9fffff [ 0.463193] alloc irq_desc for 18 on node 0 [ 0.463194] alloc kstat_irqs on node 0 [ 0.463202] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.463260] pci 0000:00:02.0: setting latency timer to 64 [ 0.463263] alloc irq_desc for 19 on node 0 [ 0.463265] alloc kstat_irqs on node 0 [ 0.463271] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.463328] pci 0000:00:07.0: setting latency timer to 64 [ 0.463332] alloc irq_desc for 17 on node 0 [ 0.463333] alloc kstat_irqs on node 0 [ 0.463339] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.463396] pci 0000:00:09.0: setting latency timer to 64 [ 0.463400] pci 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.463457] pci 0000:00:0b.0: setting latency timer to 64 [ 0.463463] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.463465] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.463468] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.463469] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbffffff] [ 0.463471] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.463473] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff] [ 0.463475] pci_bus 0000:02: resource 1 mem: [0xfdc00000-0xfdcfffff] [ 0.463477] pci_bus 0000:02: resource 2 pref mem [0xfdb00000-0xfdbfffff] [ 0.463479] pci_bus 0000:03: resource 0 io: [0xe000-0xefff] [ 0.463481] pci_bus 0000:03: resource 1 mem: [0xfd800000-0xfd8fffff] [ 0.463483] pci_bus 0000:03: resource 2 pref mem [0xfdf00000-0xfdffffff] [ 0.463484] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff] [ 0.463486] pci_bus 0000:04: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.463488] pci_bus 0000:04: resource 2 pref mem [0xfdd00000-0xfddfffff] [ 0.463490] pci_bus 0000:05: resource 0 io: [0xa000-0xafff] [ 0.463492] pci_bus 0000:05: resource 1 mem: [0xfda00000-0xfdafffff] [ 0.463494] pci_bus 0000:05: resource 2 pref mem [0xfd900000-0xfd9fffff] [ 0.463496] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.463497] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.463574] NET: Registered protocol family 2 [ 0.463762] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.464653] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.466866] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.467186] TCP: Hash tables configured (established 524288 bind 65536) [ 0.467244] TCP reno registered [ 0.467414] NET: Registered protocol family 1 [ 0.467510] Trying to unpack rootfs image as initramfs... [ 0.503895] Switched to high resolution mode on CPU 1 [ 0.503898] Switched to high resolution mode on CPU 2 [ 0.503902] Switched to high resolution mode on CPU 3 [ 0.504022] Switched to high resolution mode on CPU 0 [ 0.622475] Freeing initrd memory: 9211k freed [ 0.626162] audit: initializing netlink socket (disabled) [ 0.626228] type=2000 audit(1252917058.625:1): initialized [ 0.626578] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.626774] VFS: Disk quotas dquot_6.5.2 [ 0.626854] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.626949] msgmni has been set to 7929 [ 0.627155] alg: No test for stdrng (krng) [ 0.627258] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.627325] io scheduler noop registered [ 0.627378] io scheduler anticipatory registered [ 0.627433] io scheduler deadline registered [ 0.631821] io scheduler cfq registered (default) [ 0.772136] pci 0000:01:00.0: Boot video device [ 0.772281] alloc irq_desc for 25 on node 0 [ 0.772282] alloc kstat_irqs on node 0 [ 0.772289] pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X [ 0.772293] pcieport-driver 0000:00:02.0: setting latency timer to 64 [ 0.772410] alloc irq_desc for 26 on node 0 [ 0.772411] alloc kstat_irqs on node 0 [ 0.772415] pcieport-driver 0000:00:07.0: irq 26 for MSI/MSI-X [ 0.772419] pcieport-driver 0000:00:07.0: setting latency timer to 64 [ 0.772530] alloc irq_desc for 27 on node 0 [ 0.772531] alloc kstat_irqs on node 0 [ 0.772535] pcieport-driver 0000:00:09.0: irq 27 for MSI/MSI-X [ 0.772538] pcieport-driver 0000:00:09.0: setting latency timer to 64 [ 0.772647] alloc irq_desc for 28 on node 0 [ 0.772649] alloc kstat_irqs on node 0 [ 0.772652] pcieport-driver 0000:00:0b.0: irq 28 for MSI/MSI-X [ 0.772656] pcieport-driver 0000:00:0b.0: setting latency timer to 64 [ 0.775299] Linux agpgart interface v0.103 [ 0.775354] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.775527] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.775947] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.777464] brd: module loaded [ 0.777578] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 0.777793] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.777849] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.778023] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.778188] mice: PS/2 mouse device common for all mice [ 0.778293] rtc_cmos 00:05: RTC can wake from S4 [ 0.778385] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.778471] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.778551] cpuidle: using governor ladder [ 0.778605] cpuidle: using governor menu [ 0.778662] No iBFT detected. [ 0.778974] TCP cubic registered [ 0.779082] NET: Registered protocol family 10 [ 0.779485] lo: Disabled Privacy Extensions [ 0.779768] Mobile IPv6 [ 0.779821] NET: Registered protocol family 17 [ 0.780180] registered taskstats version 1 [ 0.780381] rtc_cmos 00:05: setting system clock to 2009-09-14 08:30:59 UTC (1252917059) [ 0.780486] Freeing unused kernel memory: 584k freed [ 0.780679] Write protecting the kernel read-only data: 4000k [ 0.802581] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 0.882270] Floppy drive(s): fd0 is 1.44M [ 0.889776] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.889848] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.889950] r8169 0000:02:00.0: setting latency timer to 64 [ 0.889980] alloc irq_desc for 29 on node 0 [ 0.889982] alloc kstat_irqs on node 0 [ 0.889992] r8169 0000:02:00.0: irq 29 for MSI/MSI-X [ 0.890429] eth0: RTL8168d/8111d at 0xffffc90000674000, 00:24:1d:18:f8:b2, XID 281000c0 IRQ 29 [ 0.894212] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.894277] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.894352] r8169 0000:03:00.0: setting latency timer to 64 [ 0.894380] alloc irq_desc for 30 on node 0 [ 0.894381] alloc kstat_irqs on node 0 [ 0.894389] r8169 0000:03:00.0: irq 30 for MSI/MSI-X [ 0.894818] eth1: RTL8168d/8111d at 0xffffc90000634000, 00:24:1d:18:f8:f3, XID 281000c0 IRQ 30 [ 0.900291] FDC 0 is a post-1991 82077 [ 0.902177] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.902409] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.902491] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 0.902600] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 0.902692] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 0.902772] ehci_hcd 0000:00:12.2: debug port 1 [ 0.902847] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 [ 0.903960] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.912020] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 0.912096] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.912153] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.912219] usb usb1: Product: EHCI Host Controller [ 0.912274] usb usb1: Manufacturer: Linux 2.6.31-rc9 ehci_hcd [ 0.912329] usb usb1: SerialNumber: 0000:00:12.2 [ 0.912431] usb usb1: configuration #1 chosen from 1 choice [ 0.912516] hub 1-0:1.0: USB hub found [ 0.912577] hub 1-0:1.0: 6 ports detected [ 0.912732] SCSI subsystem initialized [ 0.917597] alloc irq_desc for 16 on node 0 [ 0.917600] alloc kstat_irqs on node 0 [ 0.917610] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.917695] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 0.917792] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2 [ 0.917892] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 [ 0.918433] Uniform Multi-Platform E-IDE driver [ 0.928423] libata version 3.00 loaded. [ 0.945623] alloc irq_desc for 22 on node 0 [ 0.945626] alloc kstat_irqs on node 0 [ 0.945637] firewire_ohci 0000:05:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.945779] mvsas 0000:04:00.0: mvsas: driver version 0.8.2 [ 0.945839] mvsas 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.945898] mvsas 0000:04:00.0: setting latency timer to 64 [ 0.947342] mvsas 0000:04:00.0: mvsas: PCI-E x4, Bandwidth Usage: 2.5 Gbps [ 0.988854] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.988914] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.988980] usb usb2: Product: OHCI Host Controller [ 0.989038] usb usb2: Manufacturer: Linux 2.6.31-rc9 ohci_hcd [ 0.989094] usb usb2: SerialNumber: 0000:00:12.0 [ 0.989229] usb usb2: configuration #1 chosen from 1 choice [ 0.989329] hub 2-0:1.0: USB hub found [ 0.989390] hub 2-0:1.0: 3 ports detected [ 0.989627] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.989704] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 0.989789] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 0.989874] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 0.989953] ehci_hcd 0000:00:13.2: debug port 1 [ 0.990032] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 [ 1.000114] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.000185] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.000241] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.000307] usb usb3: Product: EHCI Host Controller [ 1.000361] usb usb3: Manufacturer: Linux 2.6.31-rc9 ehci_hcd [ 1.000417] usb usb3: SerialNumber: 0000:00:13.2 [ 1.000508] usb usb3: configuration #1 chosen from 1 choice [ 1.000585] hub 3-0:1.0: USB hub found [ 1.000644] hub 3-0:1.0: 6 ports detected [ 1.000977] atiixp 0000:00:14.1: IDE controller (0x1002:0x439c rev 0x00) [ 1.001043] ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.001122] atiixp 0000:00:14.1: not 100% native mode: will probe irqs later [ 1.001183] ide0: BM-DMA at 0xfa00-0xfa07 [ 1.001250] atiixp 0000:00:14.1: simplex device: DMA disabled [ 1.001305] ide1: DMA disabled [ 1.001367] Probing IDE interface ide0... [ 1.016139] firewire_ohci: Added fw-ohci device 0000:05:0e.0, OHCI version 1.10 [ 1.460142] usb 2-3: new low speed USB device using ohci_hcd and address 2 [ 1.517668] firewire_core: created device fw0: GUID 001a9c2c0000241d, S400 [ 1.568143] Probing IDE interface ide1... [ 1.571122] ide1: no devices on the port [ 1.571212] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 1.571349] ide1 at 0x170-0x177,0x376 on irq 15 [ 1.571658] ahci 0000:00:11.0: version 3.0 [ 1.571671] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.571847] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.571914] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.572436] scsi1 : ahci [ 1.572648] scsi2 : ahci [ 1.572745] scsi3 : ahci [ 1.572838] scsi4 : ahci [ 1.572928] scsi5 : ahci [ 1.573022] scsi6 : ahci [ 1.573165] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 1.573232] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 1.573299] ata3: SATA max UDMA/133 irq_stat 0x00000040, connection status changed [ 1.573366] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 1.573432] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22 [ 1.573499] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22 [ 1.573652] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.573739] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 1.573838] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.573923] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 [ 1.629951] usb 2-3: New USB device found, idVendor=046d, idProduct=c01d [ 1.630010] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.630067] usb 2-3: Product: USB-PS/2 Optical Mouse [ 1.630122] usb 2-3: Manufacturer: Logitech [ 1.630226] usb 2-3: configuration #1 chosen from 1 choice [ 1.632036] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.632095] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.632160] usb usb4: Product: OHCI Host Controller [ 1.632215] usb usb4: Manufacturer: Linux 2.6.31-rc9 ohci_hcd [ 1.632270] usb usb4: SerialNumber: 0000:00:12.1 [ 1.632368] usb usb4: configuration #1 chosen from 1 choice [ 1.632448] hub 4-0:1.0: USB hub found [ 1.632514] hub 4-0:1.0: 3 ports detected [ 1.632679] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.632748] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.632830] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.632925] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 [ 1.692106] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.692165] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.692230] usb usb5: Product: OHCI Host Controller [ 1.692284] usb usb5: Manufacturer: Linux 2.6.31-rc9 ohci_hcd [ 1.692340] usb usb5: SerialNumber: 0000:00:13.0 [ 1.692434] usb usb5: configuration #1 chosen from 1 choice [ 1.692512] hub 5-0:1.0: USB hub found [ 1.692577] hub 5-0:1.0: 3 ports detected [ 1.692716] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.692784] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.692865] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.692947] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 [ 1.752089] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.752145] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.756490] usb usb6: Product: OHCI Host Controller [ 1.756544] usb usb6: Manufacturer: Linux 2.6.31-rc9 ohci_hcd [ 1.756600] usb usb6: SerialNumber: 0000:00:13.1 [ 1.756694] usb usb6: configuration #1 chosen from 1 choice [ 1.756766] hub 6-0:1.0: USB hub found [ 1.756826] hub 6-0:1.0: 3 ports detected [ 1.756971] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.757040] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.757119] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.757198] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000 [ 1.816089] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.816145] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.816211] usb usb7: Product: OHCI Host Controller [ 1.816265] usb usb7: Manufacturer: Linux 2.6.31-rc9 ohci_hcd [ 1.816321] usb usb7: SerialNumber: 0000:00:14.5 [ 1.816409] usb usb7: configuration #1 chosen from 1 choice [ 1.816480] hub 7-0:1.0: USB hub found [ 1.816543] hub 7-0:1.0: 2 ports detected [ 1.893131] ata4: SATA link down (SStatus 0 SControl 300) [ 2.056108] ata6: softreset failed (device not ready) [ 2.056113] ata1: softreset failed (device not ready) [ 2.056116] ata1: applying SB600 PMP SRST workaround and retrying [ 2.056287] ata6: applying SB600 PMP SRST workaround and retrying [ 2.056357] ata5: softreset failed (device not ready) [ 2.056412] ata5: applying SB600 PMP SRST workaround and retrying [ 2.056481] ata2: softreset failed (device not ready) [ 2.056542] ata2: applying SB600 PMP SRST workaround and retrying [ 2.220149] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.220160] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.220186] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.220215] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.220802] ata1.00: ATA-7: OCZ-VERTEX v1.10, 1370, max UDMA/133 [ 2.220862] ata1.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.221498] ata1.00: configured for UDMA/133 [ 2.236190] scsi 1:0:0:0: Direct-Access ATA OCZ-VERTEX v1.10 1370 PQ: 0 ANSI: 5 [ 2.247396] ata2.00: ATA-8: ST31000528AS, CC34, max UDMA/133 [ 2.247452] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.262851] ata6.00: ATA-8: WDC WD20EADS-00R6B0, 01.00A01, max UDMA/133 [ 2.262908] ata6.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.267599] ata6.00: configured for UDMA/133 [ 2.269157] ata5.00: ATA-8: WDC WD20EADS-00R6B0, 01.00A01, max UDMA/133 [ 2.269214] ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.275112] ata5.00: configured for UDMA/133 [ 2.287189] ata2.00: configured for UDMA/133 [ 2.300128] scsi 2:0:0:0: Direct-Access ATA ST31000528AS CC34 PQ: 0 ANSI: 5 [ 2.460125] ata3: softreset failed (device not ready) [ 2.460181] ata3: applying SB600 PMP SRST workaround and retrying [ 2.624127] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.625490] ata3.00: ATAPI: PIONEER DVD-RW DVR-212D, 1.21, max UDMA/66 [ 2.627143] ata3.00: configured for UDMA/66 [ 2.654687] scsi 3:0:0:0: CD-ROM PIONEER DVD-RW DVR-212D 1.21 PQ: 0 ANSI: 5 [ 2.654856] scsi 5:0:0:0: Direct-Access ATA WDC WD20EADS-00R 01.0 PQ: 0 ANSI: 5 [ 2.654999] scsi 6:0:0:0: Direct-Access ATA WDC WD20EADS-00R 01.0 PQ: 0 ANSI: 5 [ 2.658652] usbcore: registered new interface driver hiddev [ 2.664193] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb2/2-3/2-3:1.0/input/input2 [ 2.664301] generic-usb 0003:046D:C01D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-3/input0 [ 2.664387] usbcore: registered new interface driver usbhid [ 2.664443] usbhid: v2.6:USB HID core driver [ 2.666178] sd 1:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 2.666261] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.666271] sd 1:0:0:0: [sda] Write Protect is off [ 2.666273] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.666285] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.666356] sda: [ 2.666391] sd 5:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 2.666412] sd 5:0:0:0: [sdc] Write Protect is off [ 2.666414] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.666425] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.666486] sdc: sda2 [ 2.666765] sd 2:0:0:0: [sdb] Write Protect is off [ 2.666767] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.666778] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.666958] [ 2.667084] sdb: [ 2.667145] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.667159] sd 6:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 2.667180] sd 6:0:0:0: [sdd] Write Protect is off [ 2.667181] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.667192] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.667251] sdd: sdb1 sdb2 sdb3 sdb4 [ 2.685935] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 2.685994] Uniform CD-ROM driver Revision: 3.20 [ 2.686124] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 2.700049] ldm_parse_tocblock(): Cannot find TOCBLOCK, database may be corrupt. [ 2.700118] ldm_parse_tocblock(): Cannot find TOCBLOCK, database may be corrupt. [ 2.706984] sd 2:0:0:0: [sdb] Attached SCSI disk [ 2.716510] ldm_parse_tocblock(): Cannot find TOCBLOCK, database may be corrupt. [ 2.716579] ldm_parse_tocblock(): Cannot find TOCBLOCK, database may be corrupt. [ 2.735845] [LDM] sdc1 [ 2.736224] sd 5:0:0:0: [sdc] Attached SCSI disk [ 2.749709] [LDM] sdd1 [ 2.750067] sd 6:0:0:0: [sdd] Attached SCSI disk [ 2.754121] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 2.754198] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.754271] sr 3:0:0:0: Attached scsi generic sg2 type 5 [ 2.754343] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 2.754416] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 5.232112] drivers/scsi/mvsas/mv_sas.c 1214:port 0 attach dev info is 0 [ 5.232115] drivers/scsi/mvsas/mv_sas.c 1216:port 0 attach sas addr is 0 [ 5.336121] drivers/scsi/mvsas/mv_sas.c 1214:port 1 attach dev info is 0 [ 5.336123] drivers/scsi/mvsas/mv_sas.c 1216:port 1 attach sas addr is 0 [ 5.440126] drivers/scsi/mvsas/mv_sas.c 1214:port 2 attach dev info is 0 [ 5.440127] drivers/scsi/mvsas/mv_sas.c 1216:port 2 attach sas addr is 0 [ 5.544125] drivers/scsi/mvsas/mv_sas.c 1214:port 3 attach dev info is 0 [ 5.544127] drivers/scsi/mvsas/mv_sas.c 1216:port 3 attach sas addr is 0 [ 5.648111] drivers/scsi/mvsas/mv_sas.c 1214:port 4 attach dev info is 0 [ 5.648112] drivers/scsi/mvsas/mv_sas.c 1216:port 4 attach sas addr is 0 [ 5.752107] drivers/scsi/mvsas/mv_sas.c 1214:port 5 attach dev info is 0 [ 5.752109] drivers/scsi/mvsas/mv_sas.c 1216:port 5 attach sas addr is 0 [ 5.856105] drivers/scsi/mvsas/mv_sas.c 1214:port 6 attach dev info is 0 [ 5.856107] drivers/scsi/mvsas/mv_sas.c 1216:port 6 attach sas addr is 0 [ 5.960125] drivers/scsi/mvsas/mv_sas.c 1214:port 7 attach dev info is 0 [ 5.960127] drivers/scsi/mvsas/mv_sas.c 1216:port 7 attach sas addr is 0 [ 5.960132] scsi0 : mvsas [ 6.017934] device-mapper: uevent: version 1.0.3 [ 6.018168] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 6.033567] kjournald starting. Commit interval 5 seconds [ 6.033572] EXT3-fs: mounted filesystem with ordered data mode. [ 6.183525] udev: starting version 141 [ 6.214940] processor LNXCPU:00: registered as cooling_device0 [ 6.215029] processor LNXCPU:01: registered as cooling_device1 [ 6.215113] processor LNXCPU:02: registered as cooling_device2 [ 6.215196] processor LNXCPU:03: registered as cooling_device3 [ 6.217051] ACPI: WMI: Mapper loaded [ 6.218023] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 6.218093] ACPI: Power Button [PWRF] [ 6.218193] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 [ 6.218260] ACPI: Power Button [PWRB] [ 6.224685] parport_pc 00:0a: reported by Plug and Play ACPI [ 6.224792] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 6.266109] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f] [ 6.266180] ACPI: Device needs an ACPI driver [ 6.266250] piix4_smbus: probe of 0000:00:14.0 failed with error -16 [ 6.268207] EDAC MC: Ver: 2.1.0 Sep 9 2009 [ 6.274408] EDAC amd64_edac: Ver: 3.2.0 Sep 9 2009 [ 6.276436] EDAC amd64: This node reports that Memory ECC is currently disabled. [ 6.276504] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled [ 6.276573] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded. [ 6.276574] Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter. [ 6.276575] Might be a BIOS bug, if BIOS says ECC is enabled [ 6.276576] Use of the override can cause unknown side effects. [ 6.276835] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 6.361783] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.441160] hda_codec: Unknown model for ALC889A, trying auto-probe from BIOS... [ 6.441403] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5 [ 6.642244] Adding 8385920k swap on /dev/sdb4. Priority:-1 extents:1 across:8385920k [ 6.662562] EXT3 FS on sda2, internal journal [ 6.680895] loop: module loaded [ 6.699068] it87: Found IT8720F chip at 0x228, revision 5 [ 6.699132] it87: in3 is VCC (+5V) [ 7.024976] kjournald starting. Commit interval 5 seconds [ 7.025418] EXT3 FS on sdb3, internal journal [ 7.025523] EXT3-fs: mounted filesystem with ordered data mode. [ 7.135226] Bridge firewalling registered [ 7.137827] device eth0 entered promiscuous mode [ 7.138843] r8169: eth0: link up [ 7.138901] r8169: eth0: link up [ 7.140606] br0: port 1(eth0) entering learning state [ 17.716140] br0: no IPv6 routers present [ 17.944120] eth0: no IPv6 routers present [ 22.140134] br0: port 1(eth0) entering forwarding state [ 35.456274] RPC: Registered udp transport module. [ 35.456340] RPC: Registered tcp transport module. [ 35.466800] Slow work thread pool: Starting up [ 35.467033] Slow work thread pool: Ready [ 35.467121] FS-Cache: Loaded [ 35.485760] FS-Cache: Netfs 'nfs' registered for caching [ 35.497079] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 35.686894] svc: failed to register lockdv1 RPC service (errno 97). [ 36.015021] kvm: Nested Paging enabled [ 36.048120] powernow-k8: Found 1 AMD Phenom(tm) II X4 810 Processor processors (4 cpu cores) (version 2.20.00) [ 36.048156] powernow-k8: 0 : pstate 0 (2600 MHz) [ 36.048157] powernow-k8: 1 : pstate 1 (1900 MHz) [ 36.048159] powernow-k8: 2 : pstate 2 (1400 MHz) [ 36.048160] powernow-k8: 3 : pstate 3 (800 MHz) [ 46.962610] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 46.966004] NFSD: starting 90-second grace period [ 47.073495] lo: Disabled Privacy Extensions [ 47.074913] process `upsagentd' is using obsolete setsockopt SO_BSDCOMPAT [ 214.276612] CE: hpet increasing min_delta_ns to 15000 nsec [ 7089.781711] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 7089.781731] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [ 7089.781735] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 7089.781742] ata5.00: status: { DRDY } [ 7089.781754] ata5: hard resetting link [ 7090.264636] ata5: softreset failed (device not ready) [ 7090.264646] ata5: applying SB600 PMP SRST workaround and retrying [ 7090.429567] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 7090.441356] ata5.00: configured for UDMA/133 [ 7090.441384] ata5: EH complete [ 7809.252040] CE: hpet increasing min_delta_ns to 22500 nsec [ 8001.781161] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 8001.781181] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [ 8001.781184] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 8001.781192] ata5.00: status: { DRDY } [ 8001.781204] ata5: hard resetting link [ 8002.264696] ata5: softreset failed (device not ready) [ 8002.264706] ata5: applying SB600 PMP SRST workaround and retrying [ 8002.429687] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8002.442233] ata5.00: configured for UDMA/133 [ 8002.442261] ata5: EH complete [ 8009.781719] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 8009.781739] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [ 8009.781743] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 8009.781750] ata5.00: status: { DRDY } [ 8009.781762] ata5: hard resetting link [ 8010.265634] ata5: softreset failed (device not ready) [ 8010.265644] ata5: applying SB600 PMP SRST workaround and retrying [ 8010.429655] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8010.441260] ata5.00: configured for UDMA/133 [ 8010.441285] ata5: EH complete [ 8071.816076] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 8071.816096] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [ 8071.816100] res 40/00:00:af:88:e0/00:00:e8:00:00/e0 Emask 0x4 (timeout) [ 8071.816108] ata5.00: status: { DRDY } [ 8071.816120] ata5: hard resetting link [ 8072.301610] ata5: softreset failed (device not ready) [ 8072.301620] ata5: applying SB600 PMP SRST workaround and retrying [ 8072.465653] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8072.477309] ata5.00: configured for UDMA/133 [ 8072.477340] ata5: EH complete [ 8079.816153] ata5.00: NCQ disabled due to excessive errors [ 8079.816166] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 8079.816184] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [ 8079.816187] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 8079.816194] ata5.00: status: { DRDY } [ 8079.816206] ata5: hard resetting link [ 8080.301526] ata5: softreset failed (device not ready) [ 8080.301536] ata5: applying SB600 PMP SRST workaround and retrying [ 8080.465648] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8080.477386] ata5.00: configured for UDMA/133 [ 8080.477409] ata5: EH complete [ 9121.781750] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 9121.781770] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [ 9121.781773] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [ 9121.781781] ata5.00: status: { DRDY } [ 9121.781793] ata5: hard resetting link [ 9122.265633] ata5: softreset failed (device not ready) [ 9122.265643] ata5: applying SB600 PMP SRST workaround and retrying [ 9122.429644] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9122.442072] ata5.00: configured for UDMA/133 [ 9122.442097] ata5: EH complete [ 9129.782278] ata5: limiting SATA link speed to 1.5 Gbps [ 9129.782290] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 9129.782308] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [ 9129.782311] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 9129.782318] ata5.00: status: { DRDY } [ 9129.782330] ata5: hard resetting link [ 9130.321162] ata5: softreset failed (device not ready) [ 9130.321172] ata5: applying SB600 PMP SRST workaround and retrying [ 9130.485644] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 9130.497280] ata5.00: configured for UDMA/133 [ 9130.497304] ata5: EH complete [10465.781851] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [10465.781871] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [10465.781874] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [10465.781882] ata5.00: status: { DRDY } [10465.781894] ata5: hard resetting link [10466.265656] ata5: softreset failed (device not ready) [10466.265666] ata5: applying SB600 PMP SRST workaround and retrying [10466.429585] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [10466.441756] ata5.00: configured for UDMA/133 [10466.441789] ata5: EH complete [10941.793179] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [10941.793200] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [10941.793203] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [10941.793210] ata5.00: status: { DRDY } [10941.793222] ata5: hard resetting link [10942.276163] ata5: softreset failed (device not ready) [10942.276174] ata5: applying SB600 PMP SRST workaround and retrying [10942.441223] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [10942.452976] ata5.00: configured for UDMA/133 [10942.453008] ata5: EH complete [10949.792075] ata5.00: limiting speed to UDMA/100:PIO4 [10949.792088] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [10949.792106] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [10949.792109] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [10949.792116] ata5.00: status: { DRDY } [10949.792128] ata5: hard resetting link [10950.277640] ata5: softreset failed (device not ready) [10950.277650] ata5: applying SB600 PMP SRST workaround and retrying [10950.441151] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [10950.453294] ata5.00: configured for UDMA/100 [10950.453326] ata5: EH complete [12271.781785] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [12271.781806] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [12271.781809] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [12271.781816] ata5.00: status: { DRDY } [12271.781828] ata5: hard resetting link [12272.265692] ata5: softreset failed (device not ready) [12272.265703] ata5: applying SB600 PMP SRST workaround and retrying [12272.428666] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [12272.441979] ata5.00: configured for UDMA/100 [12272.442005] ata5: EH complete [12279.781569] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [12279.781590] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [12279.781593] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [12279.781601] ata5.00: status: { DRDY } [12279.781612] ata5: hard resetting link [12280.265637] ata5: softreset failed (device not ready) [12280.265648] ata5: applying SB600 PMP SRST workaround and retrying [12280.428152] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [12280.439793] ata5.00: configured for UDMA/100 [12280.439818] ata5: EH complete [13335.780697] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [13335.780718] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [13335.780721] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [13335.780729] ata5.00: status: { DRDY } [13335.780741] ata5: hard resetting link [13336.264164] ata5: softreset failed (device not ready) [13336.264175] ata5: applying SB600 PMP SRST workaround and retrying [13336.428082] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [13336.440215] ata5.00: configured for UDMA/100 [13336.440246] ata5: EH complete [15688.781367] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [15688.781387] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [15688.781390] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [15688.781397] ata5.00: status: { DRDY } [15688.781409] ata5: hard resetting link [15689.264667] ata5: softreset failed (device not ready) [15689.264677] ata5: applying SB600 PMP SRST workaround and retrying [15689.429174] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [15689.440882] ata5.00: configured for UDMA/100 [15689.440910] ata5: EH complete [15696.780404] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [15696.780424] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [15696.780428] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [15696.780435] ata5.00: status: { DRDY } [15696.780447] ata5: hard resetting link [15697.376681] ata5: softreset failed (device not ready) [15697.376692] ata5: applying SB600 PMP SRST workaround and retrying [15697.541562] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [15697.554171] ata5.00: configured for UDMA/100 [15697.554197] ata5: EH complete [16694.781727] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [16694.781747] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [16694.781751] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [16694.781758] ata5.00: status: { DRDY } [16694.781770] ata5: hard resetting link [16695.265197] ata5: softreset failed (device not ready) [16695.265208] ata5: applying SB600 PMP SRST workaround and retrying [16695.428306] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [16695.440848] ata5.00: configured for UDMA/100 [16695.440874] ata5: EH complete [16702.781522] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [16702.781529] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [16702.781530] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [16702.781533] ata5.00: status: { DRDY } [16702.781537] ata5: hard resetting link [16703.264389] ata5: softreset failed (device not ready) [16703.264399] ata5: applying SB600 PMP SRST workaround and retrying [16703.430387] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [16703.442092] ata5.00: configured for UDMA/100 [16703.442119] ata5: EH complete [17317.818447] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [17317.818468] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [17317.818471] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [17317.818479] ata5.00: status: { DRDY } [17317.818491] ata5: hard resetting link [17318.301567] ata5: softreset failed (device not ready) [17318.301578] ata5: applying SB600 PMP SRST workaround and retrying [17318.465688] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [17318.477730] ata5.00: configured for UDMA/100 [17318.477768] ata5: EH complete [17325.816252] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [17325.816273] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [17325.816276] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [17325.816283] ata5.00: status: { DRDY } [17325.816295] ata5: hard resetting link [17326.413099] ata5: softreset failed (device not ready) [17326.413109] ata5: applying SB600 PMP SRST workaround and retrying [17326.577169] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [17326.589045] ata5.00: configured for UDMA/100 [17326.589072] ata5: EH complete [17669.793632] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [17669.793653] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [17669.793656] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [17669.793663] ata5.00: status: { DRDY } [17669.793675] ata5: hard resetting link [17670.557535] ata5: softreset failed (device not ready) [17670.557545] ata5: applying SB600 PMP SRST workaround and retrying [17670.721646] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [17670.734091] ata5.00: configured for UDMA/100 [17670.734122] ata5: EH complete [17678.793718] ata5.00: limiting speed to UDMA/33:PIO4 [17678.793731] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [17678.793748] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [17678.793751] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [17678.793758] ata5.00: status: { DRDY } [17678.793770] ata5: hard resetting link [17679.277635] ata5: softreset failed (device not ready) [17679.277645] ata5: applying SB600 PMP SRST workaround and retrying [17679.441362] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [17679.453900] ata5.00: configured for UDMA/33 [17679.453927] ata5: EH complete [17949.781871] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [17949.781891] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [17949.781895] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [17949.781902] ata5.00: status: { DRDY } [17949.781914] ata5: hard resetting link [17950.266694] ata5: softreset failed (device not ready) [17950.266705] ata5: applying SB600 PMP SRST workaround and retrying [17950.428175] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [17950.440744] ata5.00: configured for UDMA/33 [17950.440780] ata5: EH complete [17957.781559] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [17957.781566] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [17957.781567] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [17957.781570] ata5.00: status: { DRDY } [17957.781574] ata5: hard resetting link [17958.321043] ata5: softreset failed (device not ready) [17958.321053] ata5: applying SB600 PMP SRST workaround and retrying [17958.485159] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [17958.496978] ata5.00: configured for UDMA/33 [17958.497006] ata5: EH complete [24850.780672] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [24850.780693] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [24850.780696] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [24850.780703] ata5.00: status: { DRDY } [24850.780715] ata5: hard resetting link [24851.264685] ata5: softreset failed (device not ready) [24851.264695] ata5: applying SB600 PMP SRST workaround and retrying [24851.428553] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [24851.440605] ata5.00: configured for UDMA/33 [24851.440634] ata5: EH complete [25814.804655] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [25814.804675] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [25814.804679] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [25814.804686] ata5.00: status: { DRDY } [25814.804698] ata5: hard resetting link [25815.289583] ata5: softreset failed (device not ready) [25815.289594] ata5: applying SB600 PMP SRST workaround and retrying [25815.452425] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [25815.464619] ata5.00: configured for UDMA/33 [25815.464647] ata5: EH complete [25830.793066] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [25830.793087] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [25830.793091] res 40/00:00:af:88:e0/00:00:e8:00:00/e0 Emask 0x4 (timeout) [25830.793099] ata5.00: status: { DRDY } [25830.793111] ata5: hard resetting link [25831.277634] ata5: softreset failed (device not ready) [25831.277645] ata5: applying SB600 PMP SRST workaround and retrying [25831.440651] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [25831.452987] ata5.00: configured for UDMA/33 [25831.453014] ata5: EH complete [25970.816235] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [25970.816255] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [25970.816258] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [25970.816266] ata5.00: status: { DRDY } [25970.816277] ata5: hard resetting link [25971.300058] ata5: softreset failed (device not ready) [25971.300069] ata5: applying SB600 PMP SRST workaround and retrying [25971.464192] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [25971.475957] ata5.00: configured for UDMA/33 [25971.475995] ata5: EH complete [28350.781651] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [28350.781671] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [28350.781675] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [28350.781682] ata5.00: status: { DRDY } [28350.781694] ata5: hard resetting link [28351.265634] ata5: softreset failed (device not ready) [28351.265645] ata5: applying SB600 PMP SRST workaround and retrying [28351.429718] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [28351.441421] ata5.00: configured for UDMA/33 [28351.441445] ata5: EH complete [28964.793120] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [28964.793140] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [28964.793144] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [28964.793151] ata5.00: status: { DRDY } [28964.793163] ata5: hard resetting link [28965.276648] ata5: softreset failed (device not ready) [28965.276659] ata5: applying SB600 PMP SRST workaround and retrying [28965.440495] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [28965.452518] ata5.00: configured for UDMA/33 [28965.452543] ata5: EH complete [28980.816343] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [28980.816364] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [28980.816368] res 40/00:00:af:88:e0/00:00:e8:00:00/e0 Emask 0x4 (timeout) [28980.816375] ata5.00: status: { DRDY } [28980.816387] ata5: hard resetting link [28981.300540] ata5: softreset failed (device not ready) [28981.300551] ata5: applying SB600 PMP SRST workaround and retrying [28981.465697] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [28981.477590] ata5.00: configured for UDMA/33 [28981.477622] ata5: EH complete [29524.781659] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [29524.781680] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [29524.781683] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [29524.781691] ata5.00: status: { DRDY } [29524.781703] ata5: hard resetting link [29525.265541] ata5: softreset failed (device not ready) [29525.265551] ata5: applying SB600 PMP SRST workaround and retrying [29525.429661] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [29525.441658] ata5.00: configured for UDMA/33 [29525.441681] ata5: EH complete [29540.781986] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [29540.782006] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [29540.782009] res 40/00:00:af:88:e0/00:00:e8:00:00/e0 Emask 0x4 (timeout) [29540.782016] ata5.00: status: { DRDY } [29540.782028] ata5: hard resetting link [29541.265537] ata5: softreset failed (device not ready) [29541.265547] ata5: applying SB600 PMP SRST workaround and retrying [29541.429586] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [29541.441953] ata5.00: configured for UDMA/33 [29541.441981] ata5: EH complete [29594.781673] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [29594.781701] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [29594.781704] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [29594.781712] ata5.00: status: { DRDY } [29594.781724] ata5: hard resetting link [29595.264844] ata5: softreset failed (device not ready) [29595.264854] ata5: applying SB600 PMP SRST workaround and retrying [29595.429673] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [29595.441870] ata5.00: configured for UDMA/33 [29595.441896] ata5: EH complete [29610.780196] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [29610.780216] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [29610.780219] res 40/00:00:af:88:e0/00:00:e8:00:00/e0 Emask 0x4 (timeout) [29610.780227] ata5.00: status: { DRDY } [29610.780322] ata5: hard resetting link [29611.265639] ata5: softreset failed (device not ready) [29611.265649] ata5: applying SB600 PMP SRST workaround and retrying [29611.428973] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [29611.441089] ata5.00: configured for UDMA/33 [29611.441116] ata5: EH complete [30224.781660] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [30224.781680] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [30224.781684] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [30224.781699] ata5.00: status: { DRDY } [30224.781711] ata5: hard resetting link [30225.264347] ata5: softreset failed (device not ready) [30225.264358] ata5: applying SB600 PMP SRST workaround and retrying [30225.429672] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [30225.442540] ata5.00: configured for UDMA/33 [30225.442565] ata5: EH complete [30240.781657] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [30240.781677] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [30240.781681] res 40/00:00:af:88:e0/00:00:e8:00:00/e0 Emask 0x4 (timeout) [30240.781688] ata5.00: status: { DRDY } [30240.781724] ata5: hard resetting link [30241.265197] ata5: softreset failed (device not ready) [30241.265207] ata5: applying SB600 PMP SRST workaround and retrying [30241.429542] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [30241.441297] ata5.00: configured for UDMA/33 [30241.441325] ata5: EH complete [30310.781167] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [30310.781188] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [30310.781191] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [30310.781198] ata5.00: status: { DRDY } [30310.781210] ata5: hard resetting link [30311.264860] ata5: softreset failed (device not ready) [30311.264871] ata5: applying SB600 PMP SRST workaround and retrying [30311.429161] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [30311.441444] ata5.00: configured for UDMA/33 [30311.441471] ata5: EH complete [32410.780220] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [32410.780240] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [32410.780243] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [32410.780251] ata5.00: status: { DRDY } [32410.780262] ata5: hard resetting link [32411.264544] ata5: softreset failed (device not ready) [32411.264554] ata5: applying SB600 PMP SRST workaround and retrying [32411.428072] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [32411.440112] ata5.00: configured for UDMA/33 [32411.440148] ata5: EH complete [32452.781180] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [32452.781199] ata5.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 [32452.781202] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [32452.781209] ata5.00: status: { DRDY } [32452.781221] ata5: hard resetting link [32453.264154] ata5: softreset failed (device not ready) [32453.264159] ata5: applying SB600 PMP SRST workaround and retrying [32453.429666] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [32453.441734] ata5.00: configured for UDMA/33 [32453.441762] ata5: EH complete [32464.106741] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [32464.106751] ata5.00: irq_stat 0x40000001 [32464.106769] ata5.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in [32464.106772] res 41/04:00:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error) [32464.106780] ata5.00: status: { DRDY ERR } [32464.106785] ata5.00: error: { ABRT } [32464.118623] ata5.00: configured for UDMA/33 [32464.118646] ata5: EH complete [32473.430229] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [32473.430238] ata5.00: irq_stat 0x40000001 [32473.430257] ata5.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in [32473.430261] res 41/04:00:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error) [32473.430268] ata5.00: status: { DRDY ERR } [32473.430273] ata5.00: error: { ABRT } [32473.442098] ata5.00: configured for UDMA/33 [32473.442122] ata5: EH complete [32482.753530] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [32482.753533] ata5.00: irq_stat 0x40000001 [32482.753539] ata5.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in [32482.753540] res 41/04:00:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error) [32482.753543] ata5.00: status: { DRDY ERR } [32482.753544] ata5.00: error: { ABRT } [32482.765387] ata5.00: configured for UDMA/33 [32482.765399] ata5: EH complete [32492.076167] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [32492.076176] ata5.00: irq_stat 0x40000001 [32492.076195] ata5.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in [32492.076198] res 41/04:00:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error) [32492.076205] ata5.00: status: { DRDY ERR } [32492.076210] ata5.00: error: { ABRT } [32492.088032] ata5.00: configured for UDMA/33 [32492.088050] ata5: EH complete [32501.394658] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [32501.394667] ata5.00: irq_stat 0x40000001 [32501.394685] ata5.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in [32501.394689] res 41/04:00:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error) [32501.394696] ata5.00: status: { DRDY ERR } [32501.394701] ata5.00: error: { ABRT } [32501.406494] ata5.00: configured for UDMA/33 [32501.406518] ata5: EH complete [32510.718100] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [32510.718110] ata5.00: irq_stat 0x40000001 [32510.718128] ata5.00: cmd 25/00:08:00:88:e0/00:00:e8:00:00/e0 tag 0 dma 4096 in [32510.718131] res 41/04:00:00:88:e0/00:00:e8:00:00/e0 Emask 0x1 (device error) [32510.718138] ata5.00: status: { DRDY ERR } [32510.718143] ata5.00: error: { ABRT } [32510.730017] ata5.00: configured for UDMA/33 [32510.730042] sd 5:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [32510.730050] sd 5:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor] [32510.730059] Descriptor sense data with sense descriptors (in hex): [32510.730064] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [32510.730082] e8 e0 88 00 [32510.730090] sd 5:0:0:0: [sdc] Add. Sense: No additional sense information [32510.730098] end_request: I/O error, dev sdc, sector 3907028992 [32510.730106] Buffer I/O error on device sdc, logical block 488378624 [32510.730142] ata5: EH complete [32526.780076] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [32526.780097] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 [32526.780100] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [32526.780107] ata5.00: status: { DRDY } [32526.780119] ata5: hard resetting link [32536.785177] ata5: softreset failed (device not ready) [32536.785189] ata5: hard resetting link [32546.789238] ata5: softreset failed (device not ready) [32546.789249] ata5: hard resetting link [32557.360064] ata5: link is slow to respond, please be patient (ready=0) [32573.836192] ata5: softreset failed (device not ready) [32573.836202] ata5: applying SB600 PMP SRST workaround and retrying [32581.792026] ata5: softreset failed (device not ready) [32581.792039] ata5: hard resetting link [32587.000775] ata5: softreset failed (device not ready) [32587.000784] ata5: reset failed, giving up [32587.000790] ata5.00: disabled [32587.000822] ata5: EH complete [32587.000847] sd 5:0:0:0: [sdc] Unhandled error code [32587.000852] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [32587.000860] end_request: I/O error, dev sdc, sector 3907028904 [32587.000868] Buffer I/O error on device sdc, logical block 488378613 [32587.000958] sd 5:0:0:0: [sdc] Unhandled error code [32587.000967] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [32587.000987] end_request: I/O error, dev sdc, sector 3907028904 [32587.000995] Buffer I/O error on device sdc, logical block 488378613 [32587.001089] sd 5:0:0:0: [sdc] Unhandled error code [32587.001093] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [32587.001100] end_request: I/O error, dev sdc, sector 3907029104 [32587.001106] Buffer I/O error on device sdc, logical block 488378638 [32587.001131] sd 5:0:0:0: [sdc] Unhandled error code [32587.001136] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [32587.001142] end_request: I/O error, dev sdc, sector 3907029104 [32587.001147] Buffer I/O error on device sdc, logical block 488378638 [32587.001455] sd 5:0:0:0: [sdc] Unhandled error code [32587.001460] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [32587.001467] end_request: I/O error, dev sdc, sector 512 [32587.001472] Buffer I/O error on device sdc, logical block 64 [34244.232569] sd 5:0:0:0: [sdc] Unhandled error code [34244.232579] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [34244.232589] end_request: I/O error, dev sdc, sector 3907028904 [34244.232597] Buffer I/O error on device sdc, logical block 488378613 [34244.232645] sd 5:0:0:0: [sdc] Unhandled error code [34244.232650] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [34244.232657] end_request: I/O error, dev sdc, sector 3907029104 [34244.232662] Buffer I/O error on device sdc, logical block 488378638 [34244.232954] sd 5:0:0:0: [sdc] Unhandled error code [34244.232959] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [34244.232966] end_request: I/O error, dev sdc, sector 512 [34244.232972] Buffer I/O error on device sdc, logical block 64 [36044.818014] sd 5:0:0:0: [sdc] Unhandled error code [36044.818023] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [36044.818033] end_request: I/O error, dev sdc, sector 3907028904 [36044.818040] Buffer I/O error on device sdc, logical block 488378613 [36044.818090] sd 5:0:0:0: [sdc] Unhandled error code [36044.818095] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [36044.818102] end_request: I/O error, dev sdc, sector 3907029104 [36044.818108] Buffer I/O error on device sdc, logical block 488378638 [36044.818423] sd 5:0:0:0: [sdc] Unhandled error code [36044.818428] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [36044.818435] end_request: I/O error, dev sdc, sector 512 [36044.818441] Buffer I/O error on device sdc, logical block 64 [37844.396933] sd 5:0:0:0: [sdc] Unhandled error code [37844.396943] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [37844.396952] end_request: I/O error, dev sdc, sector 3907028904 [37844.396960] Buffer I/O error on device sdc, logical block 488378613 [37844.397052] sd 5:0:0:0: [sdc] Unhandled error code [37844.397058] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [37844.397065] end_request: I/O error, dev sdc, sector 3907029104 [37844.397071] Buffer I/O error on device sdc, logical block 488378638 [37844.397398] sd 5:0:0:0: [sdc] Unhandled error code [37844.397406] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [37844.397417] end_request: I/O error, dev sdc, sector 512 [37844.397425] Buffer I/O error on device sdc, logical block 64 [39644.622416] sd 5:0:0:0: [sdc] Unhandled error code [39644.622420] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [39644.622423] end_request: I/O error, dev sdc, sector 3907028904 [39644.622426] Buffer I/O error on device sdc, logical block 488378613 [39644.622442] sd 5:0:0:0: [sdc] Unhandled error code [39644.622443] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [39644.622445] end_request: I/O error, dev sdc, sector 3907029104 [39644.622447] Buffer I/O error on device sdc, logical block 488378638 [39644.622546] sd 5:0:0:0: [sdc] Unhandled error code [39644.622547] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [39644.622549] end_request: I/O error, dev sdc, sector 512 [39644.622551] Buffer I/O error on device sdc, logical block 64 [41444.250375] sd 5:0:0:0: [sdc] Unhandled error code [41444.250385] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [41444.250394] end_request: I/O error, dev sdc, sector 3907028904 [41444.250402] Buffer I/O error on device sdc, logical block 488378613 [41444.250451] sd 5:0:0:0: [sdc] Unhandled error code [41444.250456] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [41444.250463] end_request: I/O error, dev sdc, sector 3907029104 [41444.250469] Buffer I/O error on device sdc, logical block 488378638 [41444.250792] sd 5:0:0:0: [sdc] Unhandled error code [41444.250797] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [41444.250804] end_request: I/O error, dev sdc, sector 512 [41444.250809] Buffer I/O error on device sdc, logical block 64 [43244.870091] sd 5:0:0:0: [sdc] Unhandled error code [43244.870100] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [43244.870110] end_request: I/O error, dev sdc, sector 3907028904 [43244.870118] Buffer I/O error on device sdc, logical block 488378613 [43244.870166] sd 5:0:0:0: [sdc] Unhandled error code [43244.870171] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [43244.870178] end_request: I/O error, dev sdc, sector 3907029104 [43244.870184] Buffer I/O error on device sdc, logical block 488378638 [43244.870503] sd 5:0:0:0: [sdc] Unhandled error code [43244.870508] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [43244.870515] end_request: I/O error, dev sdc, sector 512 [43244.870520] Buffer I/O error on device sdc, logical block 64 [45044.487645] sd 5:0:0:0: [sdc] Unhandled error code [45044.487654] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [45044.487664] end_request: I/O error, dev sdc, sector 3907028904 [45044.487672] Buffer I/O error on device sdc, logical block 488378613 [45044.487720] sd 5:0:0:0: [sdc] Unhandled error code [45044.487725] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [45044.487732] end_request: I/O error, dev sdc, sector 3907029104 [45044.487737] Buffer I/O error on device sdc, logical block 488378638 [45044.488020] sd 5:0:0:0: [sdc] Unhandled error code [45044.488025] sd 5:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [45044.488032] end_request: I/O error, dev sdc, sector 512 [45044.488037] Buffer I/O error on device sdc, logical block 64