| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200909161356.26691.volkerarmin@googlemail.com> Date: Wed, 16 Sep 2009 13:56:26 +0200 From: Volker Armin Hemmann <volkerarmin@...glemail.com> To: Oliver Neukum <oliver@...kum.org> Cc: linux-usb@...r.kernel.org, LKML <linux-kernel@...r.kernel.org> Subject: Re: 2.6.31 ehci problem - mouse dead on scroll On Montag 14 September 2009, Oliver Neukum wrote: > Am Montag, 14. September 2009 20:15:56 schrieb Volker Armin Hemmann: > > I turned off > > USB selective suspend/resume and wakeup > > > > and turned on > > Root Hub Transaction Translators > > Improved Transaction Translator scheduling > > > > and haven't had any lockup anymore. > > > > Sorry for the noise. Really. > > Can you please find out whether all the options you found are needed? > > Regards > Oliver > ok, I am done. Was back earlier then expected and had an all-awake-night, so lots of time: with USB selective suspend/resume and wakeup on Root Hub Transaction Translators off Improved Transaction Translator scheduling off mouse unusable with USB selective suspend/resume and wakeup on Root Hub Transaction Translators on Improved Transaction Translator scheduling on mouse is fine with USB selective suspend/resume and wakeup off Root Hub Transaction Translators on Improved Transaction Translator scheduling on mouse is fine with USB selective suspend/resume and wakeup on Root Hub Transaction Translators on Improved Transaction Translator scheduling off mouse is fine with USB selective suspend/resume and wakeup on Root Hub Transaction Translators off Improved Transaction Translator scheduling on mouse is fine with USB selective suspend/resume and wake off Root Hub Transaction Translators off Improved Transaction Translator scheduling off mouse locks up after a couple of minutes, but not as bad as with USB selective suspend/resume and wake on. BUT: The last one (all off) I am only trying it for ~20min at the moment and had 1 lockup with USB selective suspend/resume and wake on I had sometimes 10 minutes or so without lockup too. The difference so far, with that option set, I have douzends of lockups. Without I had one and it is harder to trigger. The other combinations I ran for 1-3h and doing all the stuff that usually results in the problem (fast scrolling, fast moving the mouse a lot with lots changes in direction aka 'shrubbing the desk'). So the problem exists, USB selective suspend/resume and wake makes it worse, and any of the Translator options make it go away. dmesg from lockup: [ 0.000000] Linux version 2.6.31r4 (root@...rgy) (gcc version 4.4.1 (Gentoo 4.4.1 p1.0) ) #8 SMP Wed Sep 16 04:10:01 CEST 2009 [ 0.000000] Command line: root=/dev/md1 md=3,/dev/sda3,/dev/sdb3,/dev/sdc3 nmi_watchdog=0 mtrr_spare_reg_nr=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] AMD AuthenticAMD [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7eb0000 (usable) [ 0.000000] BIOS-e820: 00000000c7eb0000 - 00000000c7ec0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000c7ec0000 - 00000000c7ef0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000c7ef0000 - 00000000c7f00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000238000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x238000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000238000000 aka 9088M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c8000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xc7eb0 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000c7eb0000 (usable) [ 0.000000] modified: 00000000c7eb0000 - 00000000c7ec0000 (ACPI data) [ 0.000000] modified: 00000000c7ec0000 - 00000000c7ef0000 (ACPI NVS) [ 0.000000] modified: 00000000c7ef0000 - 00000000c7f00000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000238000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000c7eb0000 [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00c7e00000 page 2M [ 0.000000] 00c7e00000 - 00c7eb0000 page 4k [ 0.000000] kernel direct mapping tables up to c7eb0000 @ 10000-13000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000238000000 [ 0.000000] 0100000000 - 0200000000 page 1G [ 0.000000] 0200000000 - 0238000000 page 2M [ 0.000000] kernel direct mapping tables up to 238000000 @ 12000-14000 [ 0.000000] ACPI: RSDP 00000000000fa7c0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000c7eb0000 00040 (v01 050609 RSDT2000 20090506 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000c7eb0200 00084 (v02 A M I OEMFACP 12000601 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000c7eb0440 08512 (v01 AS140 AS140121 00000121 INTL 20051117) [ 0.000000] ACPI: FACS 00000000c7ec0000 00040 [ 0.000000] ACPI: APIC 00000000c7eb0390 0006C (v01 050609 APIC2000 20090506 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000c7eb0400 0003C (v01 050609 OEMMCFG 20090506 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000c7ec0040 00071 (v01 050609 OEMB2000 20090506 MSFT 00000097) [ 0.000000] ACPI: AAFT 00000000c7eb8960 00027 (v01 050609 OEMAAFT 20090506 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000c7eb8990 00038 (v01 050609 OEMHPET 20090506 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000c7eb89d0 0088C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0238000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00015f68c0] TEXT DATA BSS ==> [0001000000 - 00015f68c0] [ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #4 [00015f7000 - 00015f7133] BRK ==> [00015f7000 - 00015f7133] [ 0.000000] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #6 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000] [ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880028600000- ffff88002f7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00238000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000c7eb0 [ 0.000000] 0: 0x00100000 -> 0x00238000 [ 0.000000] On node 0 totalpages: 2096703 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3825 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 800488 pages, LIFO batch:31 [ 0.000000] Normal zone: 17472 pages used for memmap [ 0.000000] Normal zone: 1260480 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000c7eb0000 - 00000000c7ec0000 [ 0.000000] PM: Registered nosave memory: 00000000c7ec0000 - 00000000c7ef0000 [ 0.000000] PM: Registered nosave memory: 00000000c7ef0000 - 00000000c7f00000 [ 0.000000] PM: Registered nosave memory: 00000000c7f00000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c7f00000 (gap: c7f00000:38000000) [ 0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 25 pages at ffff880028034000, static data 71904 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064793 [ 0.000000] Kernel command line: root=/dev/md1 md=3,/dev/sda3,/dev/sdb3,/dev/sdc3 nmi_watchdog=0 mtrr_spare_reg_nr=1 [ 0.000000] md: Will configure md3 (super-block) from /dev/sda3,/dev/sdb3,/dev/sdc3, below. [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 2a02000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 8184476k/9306112k available (3484k kernel code, 919300k absent, 201360k reserved, 1750k data, 376k init) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3199.763 MHz processor. [ 0.000612] Console: colour VGA+ 80x25 [ 0.000614] console [tty0] enabled [ 0.003333] hpet clockevent registered [ 0.003333] alloc irq_desc for 24 on node 0 [ 0.003333] alloc kstat_irqs on node 0 [ 0.003333] HPET: 4 timers in total, 1 timers will be used for per-cpu timer [ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 6402.16 BogoMIPS (lpj=10665863) [ 0.003422] Mount-cache hash table entries: 256 [ 0.003546] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.003582] CPU: L2 Cache: 512K (64 bytes/line) [ 0.003616] tseg: 0000000000 [ 0.003622] CPU: Physical Processor ID: 0 [ 0.003656] CPU: Processor Core ID: 0 [ 0.003689] mce: CPU supports 6 MCE banks [ 0.003729] using C1E aware idle routine [ 0.003773] ACPI: Core revision 20090521 [ 0.016707] Setting APIC routing to flat [ 0.017032] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.051000] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02 [ 0.053332] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.003333] Initializing CPU#1 [ 0.003333] Calibrating delay using timer specific routine.. 6402.85 BogoMIPS (lpj=10666963) [ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.003333] CPU: L2 Cache: 512K (64 bytes/line) [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 1 [ 0.003333] mce: CPU supports 6 MCE banks [ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.144155] CPU1: AMD Phenom(tm) II X4 955 Processor stepping 02 [ 0.144504] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.146698] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.003333] Initializing CPU#2 [ 0.003333] Calibrating delay using timer specific routine.. 6402.85 BogoMIPS (lpj=10666967) [ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.003333] CPU: L2 Cache: 512K (64 bytes/line) [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 2 [ 0.003333] mce: CPU supports 6 MCE banks [ 0.003333] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.240808] CPU2: AMD Phenom(tm) II X4 955 Processor stepping 02 [ 0.241156] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.243372] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.003333] Initializing CPU#3 [ 0.003333] Calibrating delay using timer specific routine.. 6402.85 BogoMIPS (lpj=10666962) [ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.003333] CPU: L2 Cache: 512K (64 bytes/line) [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 3 [ 0.003333] mce: CPU supports 6 MCE banks [ 0.003333] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.337566] CPU3: AMD Phenom(tm) II X4 955 Processor stepping 02 [ 0.337917] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.340007] Brought up 4 CPUs [ 0.340041] Total of 4 processors activated (25610.72 BogoMIPS). [ 0.340110] CPU0 attaching sched-domain: [ 0.340112] domain 0: span 0-3 level MC [ 0.340114] groups: 0 1 2 3 [ 0.340117] CPU1 attaching sched-domain: [ 0.340118] domain 0: span 0-3 level MC [ 0.340119] groups: 1 2 3 0 [ 0.340122] CPU2 attaching sched-domain: [ 0.340123] domain 0: span 0-3 level MC [ 0.340124] groups: 2 3 0 1 [ 0.340126] CPU3 attaching sched-domain: [ 0.340127] domain 0: span 0-3 level MC [ 0.340128] groups: 3 0 1 2 [ 0.340394] xor: automatically using best checksumming function: generic_sse [ 0.356667] generic_sse: 12835.200 MB/sec [ 0.356701] xor: using function: generic_sse (12835.200 MB/sec) [ 0.356755] Time: 13:29:25 Date: 09/16/09 [ 0.356804] NET: Registered protocol family 16 [ 0.357122] node 0 link 0: io port [1000, ffffff] [ 0.357124] TOM: 00000000c8000000 aka 3200M [ 0.357158] Fam 10h mmconf [e0000000, efffffff] [ 0.357160] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.357162] node 0 link 0: mmio [f0000000, ffffffff] [ 0.357164] node 0 link 0: mmio [a0000, bffff] [ 0.357166] node 0 link 0: mmio [c8000000, dfffffff] [ 0.357167] TOM2: 0000000238000000 aka 9088M [ 0.357201] bus: [00,07] on node 0 link 0 [ 0.357202] bus: 00 index 0 io port: [0, ffff] [ 0.357204] bus: 00 index 1 mmio: [f0000000, ffffffff] [ 0.357205] bus: 00 index 2 mmio: [a0000, bffff] [ 0.357206] bus: 00 index 3 mmio: [c8000000, dfffffff] [ 0.357207] bus: 00 index 4 mmio: [238000000, fcffffffff] [ 0.357220] ACPI: bus type pci registered [ 0.357325] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.357361] PCI: Not using MMCONFIG. [ 0.357395] PCI: Using configuration type 1 for base access [ 0.357429] PCI: Using configuration type 1 for extended access [ 0.359454] bio: create slab <bio-0> at 0 [ 0.359919] ACPI: EC: Look up EC in DSDT [ 0.367323] ACPI: Interpreter enabled [ 0.367359] ACPI: (supports S0 S1 S3 S4 S5) [ 0.367963] ACPI: Using IOAPIC for interrupt routing [ 0.368035] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.370745] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.376143] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.381448] ACPI: No dock devices found. [ 0.381744] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.381856] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff] [ 0.381902] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.381937] pci 0000:00:02.0: PME# disabled [ 0.382005] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.382040] pci 0000:00:09.0: PME# disabled [ 0.382100] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.382135] pci 0000:00:0a.0: PME# disabled [ 0.382215] pci 0000:00:11.0: reg 10 io port: [0xa000-0xa007] [ 0.382221] pci 0000:00:11.0: reg 14 io port: [0x9000-0x9003] [ 0.382227] pci 0000:00:11.0: reg 18 io port: [0x8000-0x8007] [ 0.382232] pci 0000:00:11.0: reg 1c io port: [0x7000-0x7003] [ 0.382238] pci 0000:00:11.0: reg 20 io port: [0x6000-0x600f] [ 0.382244] pci 0000:00:11.0: reg 24 32bit mmio: [0xfddff800-0xfddffbff] [ 0.382293] pci 0000:00:12.0: reg 10 32bit mmio: [0xfddfe000-0xfddfefff] [ 0.382344] pci 0000:00:12.1: reg 10 32bit mmio: [0xfddfd000-0xfddfdfff] [ 0.382413] pci 0000:00:12.2: reg 10 32bit mmio: [0xfddff000-0xfddff0ff] [ 0.382462] pci 0000:00:12.2: supports D1 D2 [ 0.382464] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.382500] pci 0000:00:12.2: PME# disabled [ 0.382562] pci 0000:00:13.0: reg 10 32bit mmio: [0xfddfc000-0xfddfcfff] [ 0.382613] pci 0000:00:13.1: reg 10 32bit mmio: [0xfddf7000-0xfddf7fff] [ 0.382682] pci 0000:00:13.2: reg 10 32bit mmio: [0xfddf6800-0xfddf68ff] [ 0.382731] pci 0000:00:13.2: supports D1 D2 [ 0.382732] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.382769] pci 0000:00:13.2: PME# disabled [ 0.382911] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] [ 0.382917] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] [ 0.382923] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.382928] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.382934] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f] [ 0.383059] pci 0000:00:14.5: reg 10 32bit mmio: [0xfddf5000-0xfddf5fff] [ 0.383193] pci 0000:02:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff] [ 0.383200] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdff0000-0xfdffffff] [ 0.383205] pci 0000:02:00.0: reg 20 io port: [0xc000-0xc0ff] [ 0.383212] pci 0000:02:00.0: reg 30 32bit mmio: [0xfdfc0000-0xfdfdffff] [ 0.383227] pci 0000:02:00.0: supports D1 D2 [ 0.383255] pci 0000:02:00.1: reg 10 64bit mmio: [0xfdfec000-0xfdfeffff] [ 0.383286] pci 0000:02:00.1: supports D1 D2 [ 0.383338] pci 0000:00:02.0: bridge io port: [0xc000-0xcfff] [ 0.383340] pci 0000:00:02.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff] [ 0.383343] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.383387] pci 0000:00:09.0: bridge io port: [0xd000-0xdfff] [ 0.383389] pci 0000:00:09.0: bridge 32bit mmio: [0xfe000000-0xfebfffff] [ 0.383392] pci 0000:00:09.0: bridge 64bit mmio pref: [0xfa000000-0xfcefffff] [ 0.383422] pci 0000:01:00.0: reg 10 io port: [0xb800-0xb8ff] [ 0.383436] pci 0000:01:00.0: reg 18 64bit mmio: [0xcffff000-0xcfffffff] [ 0.383445] pci 0000:01:00.0: reg 20 64bit mmio: [0xcffe0000-0xcffeffff] [ 0.383451] pci 0000:01:00.0: reg 30 32bit mmio: [0xfdef0000-0xfdefffff] [ 0.383478] pci 0000:01:00.0: supports D1 D2 [ 0.383479] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.383516] pci 0000:01:00.0: PME# disabled [ 0.383602] pci 0000:00:0a.0: bridge io port: [0xb000-0xbfff] [ 0.383604] pci 0000:00:0a.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.383607] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xcff00000-0xcfffffff] [ 0.383642] pci 0000:05:06.0: reg 10 32bit mmio: [0xfcfff000-0xfcffffff] [ 0.383722] pci 0000:05:08.0: reg 10 io port: [0xe800-0xe83f] [ 0.383780] pci 0000:05:08.0: supports D1 D2 [ 0.383822] pci 0000:00:14.4: transparent bridge [ 0.383858] pci 0000:00:14.4: bridge io port: [0xe000-0xefff] [ 0.383864] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfcf00000-0xfcffffff] [ 0.383876] pci_bus 0000:00: on NUMA node 0 [ 0.383879] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.384013] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.384061] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 0.384106] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.384172] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT] [ 0.387104] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15) [ 0.387334] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15) [ 0.387562] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) [ 0.387790] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15) [ 0.388018] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.388292] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 12 14 15) [ 0.388520] ACPI: PCI Interrupt Link [LNKG] (IRQs *4 10 11 12 14 15) [ 0.388734] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 12 14 15) [ 0.389097] SCSI subsystem initialized [ 0.389192] libata version 3.00 loaded. [ 0.389252] usbcore: registered new interface driver usbfs [ 0.389308] usbcore: registered new interface driver hub [ 0.389373] usbcore: registered new device driver usb [ 0.443345] raid6: int64x1 2763 MB/s [ 0.500013] raid6: int64x2 3866 MB/s [ 0.556669] raid6: int64x4 2869 MB/s [ 0.613341] raid6: int64x8 2535 MB/s [ 0.670016] raid6: sse2x1 3994 MB/s [ 0.726669] raid6: sse2x2 6495 MB/s [ 0.783339] raid6: sse2x4 7974 MB/s [ 0.783373] raid6: using algorithm sse2x4 (7974 MB/s) [ 0.783458] PCI: Using ACPI for IRQ routing [ 0.783497] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff] [ 0.783551] pci 0000:00:00.0: BAR 3: can't allocate resource [ 0.796895] PCI-DMA: Disabling AGP. [ 0.797017] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.797052] PCI-DMA: using GART IOMMU. [ 0.797087] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.798881] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0 [ 0.798989] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.803362] hpet: hpet2 irq 24 for MSI [ 0.810016] Switched to high resolution mode on CPU 0 [ 0.811167] Switched to high resolution mode on CPU 2 [ 0.811183] Switched to high resolution mode on CPU 1 [ 0.811263] Switched to high resolution mode on CPU 3 [ 0.823369] pnp: PnP ACPI init [ 0.823419] ACPI: bus type pnp registered [ 0.825667] pnp 00:0b: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.825722] pnp 00:0b: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.825777] pnp 00:0b: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.825832] pnp 00:0b: mem resource (0x100000-0xc7efffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.826140] pnp: PnP ACPI: found 12 devices [ 0.826174] ACPI: ACPI bus type pnp unregistered [ 0.826215] system 00:06: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.826269] system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.826306] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.826341] system 00:07: ioport range 0x40b-0x40b has been reserved [ 0.826377] system 00:07: ioport range 0x4d6-0x4d6 has been reserved [ 0.826412] system 00:07: ioport range 0xc00-0xc01 has been reserved [ 0.826447] system 00:07: ioport range 0xc14-0xc14 has been reserved [ 0.826482] system 00:07: ioport range 0xc50-0xc51 has been reserved [ 0.826517] system 00:07: ioport range 0xc52-0xc52 has been reserved [ 0.826552] system 00:07: ioport range 0xc6c-0xc6c has been reserved [ 0.826587] system 00:07: ioport range 0xc6f-0xc6f has been reserved [ 0.826622] system 00:07: ioport range 0xcd0-0xcd1 has been reserved [ 0.826657] system 00:07: ioport range 0xcd2-0xcd3 has been reserved [ 0.826698] system 00:07: ioport range 0xcd4-0xcd5 has been reserved [ 0.826733] system 00:07: ioport range 0xcd6-0xcd7 has been reserved [ 0.826768] system 00:07: ioport range 0xcd8-0xcdf has been reserved [ 0.826803] system 00:07: ioport range 0x800-0x89f has been reserved [ 0.826839] system 00:07: ioport range 0xb00-0xb0f has been reserved [ 0.826874] system 00:07: ioport range 0xb20-0xb3f has been reserved [ 0.826909] system 00:07: ioport range 0x900-0x90f has been reserved [ 0.826944] system 00:07: ioport range 0x910-0x91f has been reserved [ 0.826979] system 00:07: ioport range 0xfe00-0xfefe has been reserved [ 0.827014] system 00:07: iomem range 0xffb80000-0xffbfffff has been reserved [ 0.827050] system 00:07: iomem range 0xfec10000-0xfec1001f has been reserved [ 0.827087] system 00:09: ioport range 0x290-0x29f has been reserved [ 0.827123] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved [ 0.827160] system 00:0b: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.832057] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02 [ 0.832092] pci 0000:00:02.0: IO window: 0xc000-0xcfff [ 0.832128] pci 0000:00:02.0: MEM window: 0xfdf00000-0xfdffffff [ 0.832164] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.832219] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03 [ 0.832254] pci 0000:00:09.0: IO window: 0xd000-0xdfff [ 0.832289] pci 0000:00:09.0: MEM window: 0xfe000000-0xfebfffff [ 0.832325] pci 0000:00:09.0: PREFETCH window: 0x000000fa000000-0x000000fcefffff [ 0.832380] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:01 [ 0.832415] pci 0000:00:0a.0: IO window: 0xb000-0xbfff [ 0.832450] pci 0000:00:0a.0: MEM window: 0xfde00000-0xfdefffff [ 0.832485] pci 0000:00:0a.0: PREFETCH window: 0x000000cff00000-0x000000cfffffff [ 0.832541] pci 0000:00:14.4: PCI bridge, secondary bus 0000:05 [ 0.832576] pci 0000:00:14.4: IO window: 0xe000-0xefff [ 0.832614] pci 0000:00:14.4: MEM window: disabled [ 0.832650] pci 0000:00:14.4: PREFETCH window: 0xfcf00000-0xfcffffff [ 0.832691] alloc irq_desc for 18 on node -1 [ 0.832693] alloc kstat_irqs on node -1 [ 0.832696] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.832733] pci 0000:00:02.0: setting latency timer to 64 [ 0.832737] alloc irq_desc for 17 on node -1 [ 0.832738] alloc kstat_irqs on node -1 [ 0.832741] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.832776] pci 0000:00:09.0: setting latency timer to 64 [ 0.832780] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.832815] pci 0000:00:0a.0: setting latency timer to 64 [ 0.832822] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.832824] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.832825] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff] [ 0.832827] pci_bus 0000:02: resource 1 mem: [0xfdf00000-0xfdffffff] [ 0.832829] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.832830] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] [ 0.832832] pci_bus 0000:03: resource 1 mem: [0xfe000000-0xfebfffff] [ 0.832833] pci_bus 0000:03: resource 2 pref mem [0xfa000000-0xfcefffff] [ 0.832835] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 0.832836] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.832838] pci_bus 0000:01: resource 2 pref mem [0xcff00000-0xcfffffff] [ 0.832839] pci_bus 0000:05: resource 0 io: [0xe000-0xefff] [ 0.832841] pci_bus 0000:05: resource 2 pref mem [0xfcf00000-0xfcffffff] [ 0.832842] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.832844] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.832855] NET: Registered protocol family 2 [ 0.832911] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.833387] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.834370] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.834772] TCP: Hash tables configured (established 262144 bind 65536) [ 0.834807] TCP reno registered [ 0.834887] NET: Registered protocol family 1 [ 0.836062] Scanning for low memory corruption every 60 seconds [ 0.836794] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.836926] Loading Reiser4. See www.namesys.com for a description of Reiser4. [ 0.837011] msgmni has been set to 15987 [ 0.837314] alg: No test for stdrng (krng) [ 0.837355] async_tx: api initialized (sync-only) [ 0.837430] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.837485] io scheduler noop registered [ 0.837519] io scheduler cfq registered (default) [ 0.837642] pci 0000:02:00.0: Boot video device [ 0.837731] alloc irq_desc for 25 on node -1 [ 0.837732] alloc kstat_irqs on node -1 [ 0.837738] pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X [ 0.837743] pcieport-driver 0000:00:02.0: setting latency timer to 64 [ 0.837834] alloc irq_desc for 26 on node -1 [ 0.837835] alloc kstat_irqs on node -1 [ 0.837838] pcieport-driver 0000:00:09.0: irq 26 for MSI/MSI-X [ 0.837842] pcieport-driver 0000:00:09.0: setting latency timer to 64 [ 0.837932] alloc irq_desc for 27 on node -1 [ 0.837933] alloc kstat_irqs on node -1 [ 0.837936] pcieport-driver 0000:00:0a.0: irq 27 for MSI/MSI-X [ 0.837939] pcieport-driver 0000:00:0a.0: setting latency timer to 64 [ 0.838136] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.838189] ACPI: Power Button [PWRF] [ 0.838281] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.838335] ACPI: Power Button [PWRB] [ 0.838485] processor LNXCPU:00: registered as cooling_device0 [ 0.838520] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.838617] processor LNXCPU:01: registered as cooling_device1 [ 0.838686] processor LNXCPU:02: registered as cooling_device2 [ 0.838757] processor LNXCPU:03: registered as cooling_device3 [ 0.842424] Linux agpgart interface v0.103 [ 0.842616] ahci 0000:00:11.0: version 3.0 [ 0.842625] alloc irq_desc for 22 on node -1 [ 0.842626] alloc kstat_irqs on node -1 [ 0.842630] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.842778] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.842832] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 0.843386] scsi0 : ahci [ 0.843513] scsi1 : ahci [ 0.843610] scsi2 : ahci [ 0.843705] scsi3 : ahci [ 0.843803] scsi4 : ahci [ 0.843899] scsi5 : ahci [ 0.844031] ata1: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 22 [ 0.844085] ata2: SATA max UDMA/133 abar m1024@...ddff800 port 0xfddff980 irq 22 [ 0.844140] ata3: SATA max UDMA/133 abar m1024@...ddff800 port 0xfddffa00 irq 22 [ 0.844195] ata4: SATA max UDMA/133 abar m1024@...ddff800 port 0xfddffa80 irq 22 [ 0.844249] ata5: SATA max UDMA/133 abar m1024@...ddff800 port 0xfddffb00 irq 22 [ 0.844304] ata6: SATA max UDMA/133 abar m1024@...ddff800 port 0xfddffb80 irq 22 [ 0.844549] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.844584] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.845080] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.845201] mice: PS/2 mouse device common for all mice [ 0.845350] rtc_cmos 00:02: RTC can wake from S4 [ 0.845414] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.845470] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.845525] md: raid1 personality registered for level 1 [ 0.845560] md: raid6 personality registered for level 6 [ 0.845594] md: raid5 personality registered for level 5 [ 0.845628] md: raid4 personality registered for level 4 [ 0.846212] cpuidle: using governor ladder [ 0.846661] usbcore: registered new interface driver hiddev [ 0.846723] usbcore: registered new interface driver usbhid [ 0.846758] usbhid: v2.6:USB HID core driver [ 0.846818] Advanced Linux Sound Architecture Driver Version 1.0.20. [ 0.846852] ALSA device list: [ 0.846885] No soundcards found. [ 0.846954] TCP cubic registered [ 0.846994] NET: Registered protocol family 10 [ 0.847130] IPv6 over IPv4 tunneling driver [ 0.847273] NET: Registered protocol family 17 [ 0.847329] powernow-k8: Found 1 AMD Phenom(tm) II X4 955 Processor processors (4 cpu cores) (version 2.20.00) [ 0.847405] powernow-k8: 0 : pstate 0 (3200 MHz) [ 0.847439] powernow-k8: 1 : pstate 1 (2500 MHz) [ 0.847473] powernow-k8: 2 : pstate 2 (2100 MHz) [ 0.847508] powernow-k8: 3 : pstate 3 (800 MHz) [ 0.847905] PM: Resume from disk failed. [ 0.847987] Magic number: 9:524:483 [ 0.870676] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.163787] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.163848] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.163901] ata3: SATA link down (SStatus 0 SControl 300) [ 1.164198] ata6: SATA link down (SStatus 0 SControl 300) [ 1.164257] ata5: SATA link down (SStatus 0 SControl 300) [ 1.170142] ata4.00: ATA-7: SAMSUNG HD753LJ, 1AA01113, max UDMA7 [ 1.170184] ata4.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.170231] ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01110, max UDMA7 [ 1.170266] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.176638] ata4.00: configured for UDMA/133 [ 1.176694] ata2.00: configured for UDMA/133 [ 1.563786] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.570138] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01109, max UDMA7 [ 1.570174] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.576594] ata1.00: configured for UDMA/133 [ 1.587995] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5 [ 1.588225] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.588240] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.588302] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5 [ 1.588389] sd 0:0:0:0: [sda] Write Protect is off [ 1.588415] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.588433] sd 1:0:0:0: [sdb] Write Protect is off [ 1.588434] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.588443] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.588497] sdb: [ 1.588544] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.588603] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5 [ 1.588682] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.588695] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.588704] sd 3:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 1.588720] sd 3:0:0:0: [sdc] Write Protect is off [ 1.588722] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.588730] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.588770] sdc: [ 1.588805] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 1.589014] sda: sdc1 sdc2 sdc3 sdc4 < sda1 sda2 sda3 sda4 < sdb1 sdb2 sdb3 sdb4 < sdc5 sda5 sdc6 sdb5 sda6 > [ 1.614833] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.621354] sdb6 > [ 1.621698] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.622960] sdc7 > [ 1.623335] sd 3:0:0:0: [sdc] Attached SCSI disk [ 1.623379] md: Waiting for all devices to be available before autodetect [ 1.623414] md: If you don't use raid, use raid=noautodetect [ 1.623531] md: Autodetecting RAID arrays. [ 1.721437] md: Scanned 12 and added 12 devices. [ 1.721472] md: autorun ... [ 1.721506] md: considering sdc6 ... [ 1.721541] md: adding sdc6 ... [ 1.721576] md: sdc5 has different UUID to sdc6 [ 1.721610] md: sdc3 has different UUID to sdc6 [ 1.721645] md: sdc1 has different UUID to sdc6 [ 1.721680] md: adding sdb6 ... [ 1.721714] md: sdb5 has different UUID to sdc6 [ 1.721749] md: sdb3 has different UUID to sdc6 [ 1.721784] md: sdb1 has different UUID to sdc6 [ 1.721819] md: adding sda6 ... [ 1.721853] md: sda5 has different UUID to sdc6 [ 1.721887] md: sda3 has different UUID to sdc6 [ 1.721922] md: sda1 has different UUID to sdc6 [ 1.722054] md: created md3 [ 1.722088] md: bind<sda6> [ 1.722125] md: bind<sdb6> [ 1.722162] md: bind<sdc6> [ 1.722198] md: running: <sdc6><sdb6><sda6> [ 1.722339] raid5: device sdc6 operational as raid disk 2 [ 1.722373] raid5: device sdb6 operational as raid disk 1 [ 1.722407] raid5: device sda6 operational as raid disk 0 [ 1.722561] raid5: allocated 3220kB for md3 [ 1.722608] raid5: raid level 5 set md3 active with 3 out of 3 devices, algorithm 2 [ 1.722661] RAID5 conf printout: [ 1.722694] --- rd:3 wd:3 [ 1.722728] disk 0, o:1, dev:sda6 [ 1.722761] disk 1, o:1, dev:sdb6 [ 1.722795] disk 2, o:1, dev:sdc6 [ 1.722841] md3: detected capacity change from 0 to 864065421312 [ 1.722898] md: considering sdc5 ... [ 1.722934] md: adding sdc5 ... [ 1.722968] md: sdc3 has different UUID to sdc5 [ 1.723003] md: sdc1 has different UUID to sdc5 [ 1.723038] md: adding sdb5 ... [ 1.723072] md: sdb3 has different UUID to sdc5 [ 1.723107] md: sdb1 has different UUID to sdc5 [ 1.723142] md: adding sda5 ... [ 1.723176] md: sda3 has different UUID to sdc5 [ 1.723211] md: sda1 has different UUID to sdc5 [ 1.723307] md: created md2 [ 1.723342] md: bind<sda5> [ 1.723378] md: bind<sdb5> [ 1.723416] md: bind<sdc5> [ 1.723452] md: running: <sdc5><sdb5><sda5> [ 1.723586] raid5: device sdc5 operational as raid disk 2 [ 1.723620] raid5: device sdb5 operational as raid disk 1 [ 1.723655] raid5: device sda5 operational as raid disk 0 [ 1.723813] raid5: allocated 3220kB for md2 [ 1.723859] raid5: raid level 5 set md2 active with 3 out of 3 devices, algorithm 2 [ 1.723913] RAID5 conf printout: [ 1.723946] --- rd:3 wd:3 [ 1.723979] disk 0, o:1, dev:sda5 [ 1.724012] disk 1, o:1, dev:sdb5 [ 1.724046] disk 2, o:1, dev:sdc5 [ 1.724090] md2: detected capacity change from 0 to 40007499776 [ 1.724146] md: considering sdc3 ... [ 1.724181] md: adding sdc3 ... [ 1.724216] md: sdc1 has different UUID to sdc3 [ 1.724251] md: adding sdb3 ... [ 1.724285] md: sdb1 has different UUID to sdc3 [ 1.724321] md: adding sda3 ... [ 1.724355] md: sda1 has different UUID to sdc3 [ 1.724452] md: created md1 [ 1.724486] md: bind<sda3> [ 1.724523] md: bind<sdb3> [ 1.724559] md: bind<sdc3> [ 1.724599] md: running: <sdc3><sdb3><sda3> [ 1.724733] raid5: device sdc3 operational as raid disk 2 [ 1.724767] raid5: device sdb3 operational as raid disk 1 [ 1.724802] raid5: device sda3 operational as raid disk 0 [ 1.724960] raid5: allocated 3220kB for md1 [ 1.725006] raid5: raid level 5 set md1 active with 3 out of 3 devices, algorithm 2 [ 1.725059] RAID5 conf printout: [ 1.725093] --- rd:3 wd:3 [ 1.725126] disk 0, o:1, dev:sda3 [ 1.725159] disk 1, o:1, dev:sdb3 [ 1.725193] disk 2, o:1, dev:sdc3 [ 1.725241] md1: detected capacity change from 0 to 79998877696 [ 1.725297] md: considering sdc1 ... [ 1.725333] md: adding sdc1 ... [ 1.725367] md: adding sdb1 ... [ 1.725402] md: adding sda1 ... [ 1.725436] md: created md0 [ 1.725469] md: bind<sda1> [ 1.725505] md: bind<sdb1> [ 1.725543] md: bind<sdc1> [ 1.725579] md: running: <sdc1><sdb1><sda1> [ 1.725747] raid1: raid set md0 active with 3 out of 3 mirrors [ 1.725791] md0: detected capacity change from 0 to 65667072 [ 1.725845] md: ... autorun DONE. [ 1.725897] md: Loading md3: /dev/sda3 [ 1.725935] md3: unknown partition table [ 1.726092] md: couldn't update array info. -22 [ 1.726129] md: could not bd_claim sda3. [ 1.726163] md: md_import_device returned -16 [ 1.726199] md: could not bd_claim sdb3. [ 1.726233] md: md_import_device returned -16 [ 1.726269] md: could not bd_claim sdc3. [ 1.726303] md: md_import_device returned -16 [ 1.726338] md: starting md3 failed [ 1.726412] md1: unknown partition table [ 1.773805] reiser4: md1: found disk format 4.0.0. [ 5.791018] VFS: Mounted root (reiser4 filesystem) readonly on device 9:1. [ 5.791069] Freeing unused kernel memory: 376k freed [ 9.028747] udev: starting version 145 [ 9.229559] md2: [ 9.229712] md0: unknown partition table [ 9.266552] unknown partition table [ 10.399918] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 10.399933] r8169 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 10.400165] r8169 0000:01:00.0: setting latency timer to 64 [ 10.400196] alloc irq_desc for 28 on node -1 [ 10.400198] alloc kstat_irqs on node -1 [ 10.400207] r8169 0000:01:00.0: irq 28 for MSI/MSI-X [ 10.400309] eth0: RTL8168c/8111c at 0xffffc90012fba000, 00:19:66:86:ce:12, XID 3c4000c0 IRQ 28 [ 10.443002] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 10.443005] ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96 [ 10.443032] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 10.443071] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 10.443237] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 10.443244] ehci_hcd 0000:00:12.2: reset hcs_params 0x102306 dbg=1 cc=2 pcc=3 ordered !ppc ports=6 [ 10.443247] ehci_hcd 0000:00:12.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 [ 10.443269] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 10.443275] ehci_hcd 0000:00:12.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 10.443287] ehci_hcd 0000:00:12.2: debug port 1 [ 10.443292] ehci_hcd 0000:00:12.2: MWI active [ 10.443293] ehci_hcd 0000:00:12.2: supports USB remote wakeup [ 10.443307] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfddff000 [ 10.443310] ehci_hcd 0000:00:12.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 10.443315] ehci_hcd 0000:00:12.2: init command 010009 (park)=0 ithresh=1 period=256 RUN [ 10.451257] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 10.451287] usb usb1: default language 0x0409 [ 10.451291] usb usb1: udev 1, busnum 1, minor = 0 [ 10.451292] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 10.451293] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.451295] usb usb1: Product: EHCI Host Controller [ 10.451296] usb usb1: Manufacturer: Linux 2.6.31r4 ehci_hcd [ 10.451297] usb usb1: SerialNumber: 0000:00:12.2 [ 10.451321] usb usb1: uevent [ 10.451642] usb usb1: usb_probe_device [ 10.451644] usb usb1: configuration #1 chosen from 1 choice [ 10.451649] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 10.451658] usb 1-0:1.0: uevent [ 10.451684] hub 1-0:1.0: usb_probe_interface [ 10.451686] hub 1-0:1.0: usb_probe_interface - got id [ 10.451687] hub 1-0:1.0: USB hub found [ 10.451693] hub 1-0:1.0: 6 ports detected [ 10.451694] hub 1-0:1.0: standalone hub [ 10.451695] hub 1-0:1.0: no power switching (usb 1.0) [ 10.451696] hub 1-0:1.0: individual port over-current protection [ 10.451697] hub 1-0:1.0: power on to power good time: 20ms [ 10.451700] hub 1-0:1.0: local power source is good [ 10.451702] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 10.451743] alloc irq_desc for 19 on node -1 [ 10.451745] alloc kstat_irqs on node -1 [ 10.451749] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 10.451769] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 10.451810] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 10.451816] ehci_hcd 0000:00:13.2: reset hcs_params 0x102306 dbg=1 cc=2 pcc=3 ordered !ppc ports=6 [ 10.451819] ehci_hcd 0000:00:13.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 [ 10.451832] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 10.451838] ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 10.451851] ehci_hcd 0000:00:13.2: debug port 1 [ 10.451854] ehci_hcd 0000:00:13.2: MWI active [ 10.451855] ehci_hcd 0000:00:13.2: supports USB remote wakeup [ 10.451865] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfddf6800 [ 10.451868] ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 10.451873] ehci_hcd 0000:00:13.2: init command 010009 (park)=0 ithresh=1 period=256 RUN [ 10.461264] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 10.461284] usb usb2: default language 0x0409 [ 10.461288] usb usb2: udev 1, busnum 2, minor = 128 [ 10.461289] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 10.461290] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.461292] usb usb2: Product: EHCI Host Controller [ 10.461293] usb usb2: Manufacturer: Linux 2.6.31r4 ehci_hcd [ 10.461294] usb usb2: SerialNumber: 0000:00:13.2 [ 10.461316] usb usb2: uevent [ 10.461357] usb usb2: usb_probe_device [ 10.461358] usb usb2: configuration #1 chosen from 1 choice [ 10.461363] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 10.461372] usb 2-0:1.0: uevent [ 10.461389] hub 2-0:1.0: usb_probe_interface [ 10.461390] hub 2-0:1.0: usb_probe_interface - got id [ 10.461391] hub 2-0:1.0: USB hub found [ 10.461396] hub 2-0:1.0: 6 ports detected [ 10.461397] hub 2-0:1.0: standalone hub [ 10.461398] hub 2-0:1.0: no power switching (usb 1.0) [ 10.461399] hub 2-0:1.0: individual port over-current protection [ 10.461400] hub 2-0:1.0: power on to power good time: 20ms [ 10.461402] hub 2-0:1.0: local power source is good [ 10.461403] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 10.482889] Linux video capture interface: v2.00 [ 10.494771] bttv: driver version 0.9.18 loaded [ 10.494773] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 10.494836] bttv: Bt8xx card found (0). [ 10.494844] alloc irq_desc for 21 on node -1 [ 10.494846] alloc kstat_irqs on node -1 [ 10.494850] bttv 0000:05:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 10.494860] bttv0: Bt848 (rev 18) at 0000:05:06.0, irq: 21, latency: 128, mmio: 0xfcfff000 [ 10.494900] bttv0: using: Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar [card=25,insmod option] [ 10.494903] IRQ 21/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs [ 10.494937] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] [ 10.551270] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT [ 10.551272] hub 1-0:1.0: port 2: status 0501 change 0001 [ 10.561275] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 10.651263] hub 1-0:1.0: state 7 ports 6 chg 0004 evt 0000 [ 10.651272] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 10.703779] ehci_hcd 0000:00:12.2: port 2 high speed [ 10.703783] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 10.757102] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 10.810459] ehci_hcd 0000:00:12.2: port 2 high speed [ 10.810462] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 10.881956] usb 1-2: default language 0x0409 [ 10.882205] usb 1-2: udev 2, busnum 1, minor = 1 [ 10.882206] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 [ 10.882207] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 10.882209] usb 1-2: Product: USB2.0 Hub [ 10.882246] usb 1-2: uevent [ 10.882256] usb 1-2: usb_probe_device [ 10.882258] usb 1-2: configuration #1 chosen from 1 choice [ 10.882682] usb 1-2: adding 1-2:1.0 (config #1, interface 0) [ 10.882694] usb 1-2:1.0: uevent [ 10.882702] hub 1-2:1.0: usb_probe_interface [ 10.882703] hub 1-2:1.0: usb_probe_interface - got id [ 10.882707] hub 1-2:1.0: USB hub found [ 10.882955] hub 1-2:1.0: 4 ports detected [ 10.882956] hub 1-2:1.0: standalone hub [ 10.882957] hub 1-2:1.0: individual port power switching [ 10.882958] hub 1-2:1.0: individual port over-current protection [ 10.882960] hub 1-2:1.0: Single TT [ 10.882961] hub 1-2:1.0: TT requires at most 32 FS bit times (2664 ns) [ 10.882962] hub 1-2:1.0: Port indicators are supported [ 10.882963] hub 1-2:1.0: power on to power good time: 100ms [ 10.883330] hub 1-2:1.0: local power source is good [ 10.883332] hub 1-2:1.0: enabling power on all ports [ 10.985086] hub 1-2:1.0: port 2: status 0301 change 0001 [ 11.084589] usb 1-2: link qh256-0001/ffff8800c7800180 start 1 [1/0 us] [ 11.084596] hub 1-2:1.0: state 7 ports 4 chg 0004 evt 0000 [ 11.084835] hub 1-2:1.0: port 2, status 0301, change 0000, 1.5 Mb/s [ 11.151839] usb 1-2.2: new low speed USB device using ehci_hcd and address 3 [ 11.238593] usb 1-2.2: skipped 1 descriptor after interface [ 11.238595] usb 1-2.2: skipped 1 descriptor after interface [ 11.239091] usb 1-2.2: default language 0x0409 [ 11.241347] usb 1-2.2: udev 3, busnum 1, minor = 2 [ 11.241348] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c518 [ 11.241350] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 11.241351] usb 1-2.2: Product: USB Receiver [ 11.241352] usb 1-2.2: Manufacturer: Logitech [ 11.241374] usb 1-2.2: uevent [ 11.241385] usb 1-2.2: usb_probe_device [ 11.241386] usb 1-2.2: configuration #1 chosen from 1 choice [ 11.248723] usb 1-2.2: adding 1-2.2:1.0 (config #1, interface 0) [ 11.248732] usb 1-2.2:1.0: uevent [ 11.248744] usbhid 1-2.2:1.0: usb_probe_interface [ 11.248745] usbhid 1-2.2:1.0: usb_probe_interface - got id [ 11.249081] usb 1-2: clear tt buffer port 2, a3 ep0 t80008d42 [ 11.251955] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.0/input/input3 [ 11.251996] generic-usb 0003:046D:C518.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.2-2.2/input0 [ 11.252005] usb 1-2.2: adding 1-2.2:1.1 (config #1, interface 1) [ 11.252017] usb 1-2.2:1.1: uevent [ 11.252024] usbhid 1-2.2:1.1: usb_probe_interface [ 11.252025] usbhid 1-2.2:1.1: usb_probe_interface - got id [ 11.252330] usb 1-2: clear tt buffer port 2, a3 ep0 t80008d42 [ 11.257642] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.1/input/input4 [ 11.257649] usb 1-2.2: link qh8-0601/ffff8800c7800300 start 2 [1/2 us] [ 11.257662] drivers/usb/core/file.c: looking for a minor, starting at 96 [ 11.257689] generic-usb 0003:046D:C518.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-2.2/input1 [ 11.257703] hub 1-2:1.0: state 7 ports 4 chg 0000 evt 0004 [ 11.280255] usb 1-2.2:1.0: uevent [ 11.280300] usb 1-2.2: uevent [ 11.280684] usb 1-2.2:1.0: uevent [ 11.280733] usb 1-2.2: uevent [ 11.280756] usb 1-2.2:1.1: uevent [ 11.280808] usb 1-2.2: uevent [ 11.281305] usb 1-2.2:1.0: uevent [ 11.281513] usb 1-2.2:1.1: uevent [ 11.289425] usb 1-2.2:1.0: uevent [ 11.500033] bttv0: tea5757: read timeout [ 11.500035] bttv0: tuner type=5 [ 11.514539] bttv0: audio absent, no audio device found! [ 11.524867] TUNER: Unable to find symbol tea5767_autodetection() [ 11.524870] tuner 0-0060: chip found @ 0xc0 (bt848 #0 [sw]) [ 11.527659] tuner-simple 0-0060: creating new instance [ 11.527661] tuner-simple 0-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) [ 11.528497] bttv0: registered device video0 [ 11.528526] bttv0: registered device vbi0 [ 11.821758] reiser4: md2: found disk format 4.0.0. [ 13.632790] reiser4: md3: found disk format 4.0.0. [ 54.809101] reiser4: sdc7: found disk format 4.0.0. [ 67.201688] Adding 7815612k swap on /dev/sda2. Priority:1 extents:1 across:7815612k [ 67.258049] Adding 7815612k swap on /dev/sdb2. Priority:1 extents:1 across:7815612k [ 67.279757] Adding 7815612k swap on /dev/sdc2. Priority:1 extents:1 across:7815612k [ 67.977357] w83627ehf: Found W83627EHG chip at 0x290 [ 68.245636] r8169: eth0: link up [ 68.245642] r8169: eth0: link up [ 70.125283] usb usb1: uevent [ 70.125385] usb 1-0:1.0: uevent [ 70.125475] usb 1-2: uevent [ 70.125577] usb 1-2.2: uevent [ 70.125676] usb 1-2.2:1.0: uevent [ 70.126369] usb 1-2.2:1.1: uevent [ 70.127069] usb 1-2:1.0: uevent [ 70.127444] usb usb2: uevent [ 70.127542] usb 2-0:1.0: uevent [ 71.264971] alloc irq_desc for 23 on node -1 [ 71.264978] alloc kstat_irqs on node -1 [ 71.264992] EMU10K1_Audigy 0000:05:08.0: PCI INT A -> GSI 23 (level, low) - > IRQ 23 [ 71.271929] Audigy2 value: Special config. [ 72.531061] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 72.531064] Disabling lock debugging due to kernel taint [ 72.543985] [fglrx] Maximum main memory to use for locked dma buffers: 7760 MBytes. [ 72.544061] [fglrx] vendor: 1002 device: 9501 count: 1 [ 72.544241] [fglrx] ioport: bar 4, base 0xc000, size: 0x100 [ 72.544251] pci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 72.544255] pci 0000:02:00.0: setting latency timer to 64 [ 72.544384] [fglrx] Kernel PAT support is enabled [ 72.544400] [fglrx] module loaded - fglrx 8.66.2 [Sep 1 2009] with 1 minors [ 72.710232] alloc irq_desc for 29 on node -1 [ 72.710234] alloc kstat_irqs on node -1 [ 72.710243] fglrx_pci 0000:02:00.0: irq 29 for MSI/MSI-X [ 72.710562] [fglrx] Firegl kernel thread PID: 3837 [ 74.814846] [fglrx] Gart USWC size:1279 M. [ 74.814849] [fglrx] Gart cacheable size:508 M. [ 74.814852] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 74.814854] [fglrx] Reserved FB block: Unshared offset:fbff000, size:401000 [ 74.814855] [fglrx] Reserved FB block: Unshared offset:1fffc000, size:4000 [ 75.970462] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 124.835074] reiser4[bogofilter(4037)]: disable_write_barrier (fs/reiser4/wander.c:235)[zam-1055]: [ 124.835078] NOTICE: md3 does not support write barriers, using synchronous write instead. [ 239.027922] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 239.027929] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 239.027931] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 239.027933] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 239.028376] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 239.028378] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 474.084572] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 474.084588] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 474.084597] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 474.084605] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 474.085157] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 474.085167] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 616.832491] reiser4[ktxnmgrd:md1:ru(580)]: disable_write_barrier (fs/reiser4/wander.c:235)[zam-1055]: [ 616.832495] NOTICE: md1 does not support write barriers, using synchronous write instead. [ 672.235774] reiser4[qmgr(3700)]: disable_write_barrier (fs/reiser4/wander.c:235)[zam-1055]: [ 672.235776] NOTICE: md2 does not support write barriers, using synchronous write instead. [ 908.564515] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.564522] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 908.564524] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.564527] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.564926] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 908.564928] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.624512] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.624519] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 908.624521] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.624524] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.625050] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 908.625052] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.634518] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.634525] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 908.634527] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.634529] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.635802] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 908.635805] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.694512] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.694519] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 908.694521] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.694523] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.695301] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 908.695303] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.754510] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.754517] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 908.754519] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.754522] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.755562] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 908.755565] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.814504] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.814509] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 908.814511] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.814513] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.815314] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 908.815317] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.874511] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.874520] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 908.874522] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.874525] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.875566] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 908.875570] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.934521] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.934534] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 908.934541] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.934548] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.935316] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 908.935323] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.994519] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.994532] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 908.994538] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.994545] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 908.995587] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 908.995595] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.054532] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.054546] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 909.054552] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.054559] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.055319] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 909.055326] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.114525] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.114540] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 909.114547] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.114555] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.115588] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 909.115596] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.174526] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.174540] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 909.174547] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.174555] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.175332] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 909.175339] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.234519] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.234532] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 909.234539] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.234547] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.235588] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 909.235597] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.394522] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.394537] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 909.394544] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.394552] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.395073] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 909.395079] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.454523] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.454538] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 909.454544] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.454551] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.455336] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 909.455343] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.514535] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.514550] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 909.514557] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.514565] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.515596] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 909.515605] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.574523] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.574537] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 909.574543] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.574550] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.575353] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 909.575360] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.634526] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.634541] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 909.634548] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.634556] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.635581] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 909.635589] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.694524] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.694539] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 909.694546] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.694554] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.695328] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 909.695335] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.754535] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.754551] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 909.754558] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.754566] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.755597] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 909.755605] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.914524] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.914539] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 909.914546] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.914554] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.915079] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 909.915086] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.974523] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.974537] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 909.974543] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.974551] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 909.975352] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 909.975359] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.034521] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.034534] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.034541] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.034548] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.035599] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.035608] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.094537] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.094552] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.094559] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.094566] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.095353] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.095361] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.154521] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.154535] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.154542] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.154549] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.155600] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.155609] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.214522] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.214536] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.214542] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.214549] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.215342] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.215350] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.274519] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.274532] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.274538] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.274546] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.275602] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.275610] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.334526] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.334541] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.334548] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.334556] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.335363] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.335370] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.394521] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.394535] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.394542] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.394549] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.395603] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.395612] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.454521] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.454534] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.454540] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.454547] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.455348] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.455357] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.514529] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.514542] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.514548] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.514556] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.515604] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.515612] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.574527] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.574542] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.574549] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.574557] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.575355] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.575362] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.634522] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.634536] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.634542] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.634550] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.635606] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.635615] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.694527] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.694543] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.694549] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.694557] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.695352] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.695359] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.754522] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.754537] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.754543] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.754551] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.755961] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.755969] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.814529] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.814544] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.814551] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.814559] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.815363] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.815370] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.874522] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.874536] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.874542] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.874550] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.875593] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.875601] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.934526] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.934542] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.934548] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.934556] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.935353] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.935360] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.994521] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.994535] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.994541] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.994548] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 910.995610] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 910.995618] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.054521] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.054534] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.054540] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.054547] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.055340] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.055347] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.114525] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.114540] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.114547] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.114555] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.115614] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.115622] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.174520] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.174533] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.174539] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.174546] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.175343] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.175350] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.234517] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.234531] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.234537] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.234544] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.235613] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.235621] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.294520] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.294533] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.294539] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.294546] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.295345] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.295352] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.354536] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.354552] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.354559] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.354567] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.355617] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.355625] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.414522] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.414535] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.414541] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.414549] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.415358] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.415366] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.474519] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.474531] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.474537] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.474545] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.475616] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.475624] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.534520] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.534533] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.534539] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.534547] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.535366] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.535374] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.594534] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.594549] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.594555] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.594562] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.595620] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.595629] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.654525] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.654539] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.654545] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.654552] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.655371] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.655379] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.714534] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.714548] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.714554] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.714562] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.715623] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.715631] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.774533] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.774546] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.774552] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.774560] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.775372] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.775381] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.834534] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.834548] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.834554] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.834562] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.835623] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.835632] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.894532] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.894546] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.894552] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.894560] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.895374] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.895382] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.954534] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.954549] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.954555] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.954562] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 911.955625] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 911.955634] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.014534] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.014548] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.014554] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.014562] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.015375] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.015384] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.074531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.074544] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.074550] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.074557] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.075626] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.075634] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.134537] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.134551] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.134557] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.134565] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.135378] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.135386] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.194531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.194545] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.194551] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.194558] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.195627] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.195636] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.254533] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.254546] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.254552] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.254560] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.255378] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.255387] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.314531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.314545] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.314551] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.314558] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.315629] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.315638] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.374536] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.374550] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.374556] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.374564] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.375381] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.375389] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.434531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.434545] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.434551] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.434558] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.435630] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.435639] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.494532] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.494546] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.494552] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.494560] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.495381] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.495389] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.554531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.554544] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.554550] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.554558] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.555632] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.555640] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.614538] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.614553] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.614559] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.614566] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.615384] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.615393] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.674531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.674544] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.674550] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.674557] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.675633] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.675642] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.734536] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.734551] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.734557] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.734565] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.735385] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.735394] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.794531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.794544] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.794550] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.794558] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.795635] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.795643] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.854536] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.854551] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.854557] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.854564] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.855387] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.855396] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.914531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.914544] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.914550] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.914558] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.915636] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.915645] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.974541] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.974555] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.974561] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.974569] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 912.975388] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 912.975397] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.034531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.034544] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 913.034550] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.034558] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.035651] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 913.035660] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.094533] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.094547] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 913.094553] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.094560] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.095388] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 913.095397] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.154536] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.154551] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 913.154557] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.154565] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.155641] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 913.155649] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.214534] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.214548] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 913.214554] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.214561] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.215390] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 913.215399] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.274531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.274545] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 913.274551] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.274558] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.275641] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 913.275649] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.334532] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.334546] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 913.334552] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.334559] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.335384] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 913.335392] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.394535] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.394549] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 913.394555] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.394563] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.395643] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 913.395652] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.454532] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.454546] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 913.454552] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.454559] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.455393] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 913.455402] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.514531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.514545] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 913.514551] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.514558] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.515643] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 913.515652] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.574532] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.574546] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 913.574552] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.574559] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.575395] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 913.575404] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.634539] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.634554] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 913.634560] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.634567] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.635646] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 913.635655] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.694532] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.694546] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 913.694552] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.694559] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.695397] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 913.695406] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.754534] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.754549] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 913.754555] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.754562] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 913.755648] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 913.755656] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 922.914535] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 922.914551] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 922.914560] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 922.914568] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 922.914984] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 922.914991] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 922.974536] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 922.974552] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 922.974558] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 922.974566] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 922.975510] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 922.975520] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.034531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.034545] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.034551] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.034559] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.034984] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.034990] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.094537] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.094552] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.094558] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.094566] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.095513] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.095522] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.154531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.154545] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.154551] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.154559] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.154986] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.154992] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.214539] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.214554] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.214560] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.214568] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.215514] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.215523] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.274531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.274545] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.274551] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.274558] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.274987] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.274993] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.334532] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.334546] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.334552] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.334559] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.335514] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.335523] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.394530] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.394544] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.394550] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.394558] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.394989] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.394995] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.454537] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.454552] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.454559] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.454566] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.455508] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.455517] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.514531] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.514545] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.514551] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.514558] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.514990] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.514996] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.574532] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.574546] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.574552] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.574559] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.575516] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.575525] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.634521] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.634535] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.634541] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.634549] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.634999] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.635006] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.694533] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.694548] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.694554] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.694562] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.695515] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.695524] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.754529] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.754542] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.754548] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.754556] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.754992] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.754998] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.814532] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.814545] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.814551] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.814559] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.815516] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.815524] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.874534] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.874550] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.874556] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.874564] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 923.874996] ehci_hcd 0000:00:12.2: reused qh ffff8800c78003c0 schedule [ 923.875002] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 950.466763] ehci_hcd 0000:00:13.2: remove, state 1 [ 950.466769] ehci_hcd 0000:00:13.2: roothub graceful disconnect [ 950.466782] usb usb2: USB disconnect, address 1 [ 950.466786] usb usb2: unregistering device [ 950.466791] usb usb2: usb_disable_device nuking all URBs [ 950.466801] ehci_hcd 0000:00:13.2: shutdown urb ffff8802349393c0 ep1in-intr [ 950.466807] usb usb2: unregistering interface 2-0:1.0 [ 950.466903] usb 2-0:1.0: uevent [ 950.473459] usb usb2: uevent [ 950.473496] ehci_hcd 0000:00:13.2: stop [ 950.474367] ehci_hcd 0000:00:13.2: reset command 01000a (park)=0 ithresh=1 period=256 Reset HALT [ 950.474401] ehci_hcd 0000:00:13.2: irq normal 0 err 0 reclaim 0 (lost 0) [ 950.474406] ehci_hcd 0000:00:13.2: complete 0 unlink 0 [ 950.474415] ehci_hcd 0000:00:13.2: ehci_stop completed status 1000 Halt [ 950.474428] ehci_hcd 0000:00:13.2: USB bus 2 deregistered [ 950.474636] ehci_hcd 0000:00:13.2: PCI INT B disabled [ 950.475124] ehci_hcd 0000:00:12.2: remove, state 1 [ 950.475129] ehci_hcd 0000:00:12.2: roothub graceful disconnect [ 950.475141] usb usb1: USB disconnect, address 1 [ 950.475146] usb 1-2: USB disconnect, address 2 [ 950.475151] usb 1-2.2: USB disconnect, address 3 [ 950.475155] usb 1-2.2: unregistering device [ 950.475160] usb 1-2.2: usb_disable_device nuking all URBs [ 950.475174] usb 1-2.2: unlink qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 950.475188] ehci_hcd 0000:00:12.2: shutdown urb ffff880235a04c00 ep1in-intr [ 950.475197] usb 1-2.2: unlink qh8-0601/ffff8800c7800300 start 2 [1/2 us] [ 950.475207] ehci_hcd 0000:00:12.2: shutdown urb ffff88023706e240 ep2in-intr [ 950.475214] usb 1-2.2: unregistering interface 1-2.2:1.0 [ 950.493804] usb 1-2.2:1.0: uevent [ 950.493908] usb 1-2.2: unregistering interface 1-2.2:1.1 [ 950.527053] drivers/usb/core/file.c: removing 96 minor [ 950.528459] usb 1-2.2:1.1: uevent [ 950.528792] usb 1-2.2: uevent [ 950.529311] usb 1-2: unregistering device [ 950.529318] usb 1-2: usb_disable_device nuking all URBs [ 950.529332] usb 1-2: unlink qh256-0001/ffff8800c7800180 start 1 [1/0 us] [ 950.529403] ehci_hcd 0000:00:12.2: shutdown urb ffff880233cfa6c0 ep1in-intr [ 950.530699] usb 1-2: unregistering interface 1-2:1.0 [ 950.530803] usb 1-2:1.0: uevent [ 950.531187] usb 1-2: uevent [ 950.531616] usb usb1: unregistering device [ 950.531622] usb usb1: usb_disable_device nuking all URBs [ 950.531632] ehci_hcd 0000:00:12.2: shutdown urb ffff880234822840 ep1in-intr [ 950.531638] usb usb1: unregistering interface 1-0:1.0 [ 950.531719] usb 1-0:1.0: uevent [ 950.532034] usb usb1: uevent [ 950.532436] ehci_hcd 0000:00:12.2: stop [ 950.532810] ehci_hcd 0000:00:12.2: reset command 01000a (park)=0 ithresh=1 period=256 Reset HALT [ 950.532847] ehci_hcd 0000:00:12.2: irq normal 10184 err 2 reclaim 118 (lost 0) [ 950.532853] ehci_hcd 0000:00:12.2: complete 10290 unlink 3 [ 950.532861] ehci_hcd 0000:00:12.2: ehci_stop completed status 1000 Halt [ 950.532874] ehci_hcd 0000:00:12.2: USB bus 1 deregistered [ 950.533341] ehci_hcd 0000:00:12.2: PCI INT B disabled [ 960.865917] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 960.865926] ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96 [ 960.865983] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 960.866052] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 960.866238] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 960.866254] ehci_hcd 0000:00:12.2: reset hcs_params 0x102306 dbg=1 cc=2 pcc=3 ordered !ppc ports=6 [ 960.866263] ehci_hcd 0000:00:12.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 [ 960.866305] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 960.866320] ehci_hcd 0000:00:12.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 960.866341] ehci_hcd 0000:00:12.2: debug port 1 [ 960.866348] ehci_hcd 0000:00:12.2: MWI active [ 960.866352] ehci_hcd 0000:00:12.2: supports USB remote wakeup [ 960.866372] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfddff000 [ 960.866381] ehci_hcd 0000:00:12.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 960.866393] ehci_hcd 0000:00:12.2: init command 010009 (park)=0 ithresh=1 period=256 RUN [ 960.873687] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 960.873741] usb usb1: default language 0x0409 [ 960.873755] usb usb1: udev 1, busnum 1, minor = 0 [ 960.873760] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 960.873766] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 960.873771] usb usb1: Product: EHCI Host Controller [ 960.873775] usb usb1: Manufacturer: Linux 2.6.31r4 ehci_hcd [ 960.873779] usb usb1: SerialNumber: 0000:00:12.2 [ 960.873866] usb usb1: uevent [ 960.873994] usb usb1: usb_probe_device [ 960.874001] usb usb1: configuration #1 chosen from 1 choice [ 960.874017] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 960.874053] usb 1-0:1.0: uevent [ 960.874124] hub 1-0:1.0: usb_probe_interface [ 960.874129] hub 1-0:1.0: usb_probe_interface - got id [ 960.874133] hub 1-0:1.0: USB hub found [ 960.874148] hub 1-0:1.0: 6 ports detected [ 960.874152] hub 1-0:1.0: standalone hub [ 960.874155] hub 1-0:1.0: no power switching (usb 1.0) [ 960.874159] hub 1-0:1.0: individual port over-current protection [ 960.874164] hub 1-0:1.0: power on to power good time: 20ms [ 960.874173] hub 1-0:1.0: local power source is good [ 960.874178] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 960.874278] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 960.874315] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 960.874445] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 960.874459] ehci_hcd 0000:00:13.2: reset hcs_params 0x102306 dbg=1 cc=2 pcc=3 ordered !ppc ports=6 [ 960.874468] ehci_hcd 0000:00:13.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 [ 960.874501] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 960.874515] ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 960.874536] ehci_hcd 0000:00:13.2: debug port 1 [ 960.874544] ehci_hcd 0000:00:13.2: MWI active [ 960.874548] ehci_hcd 0000:00:13.2: supports USB remote wakeup [ 960.874566] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfddf6800 [ 960.874575] ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 960.874587] ehci_hcd 0000:00:13.2: init command 010009 (park)=0 ithresh=1 period=256 RUN [ 960.883687] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 960.883736] usb usb2: default language 0x0409 [ 960.883749] usb usb2: udev 1, busnum 2, minor = 128 [ 960.883754] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 960.883759] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 960.883764] usb usb2: Product: EHCI Host Controller [ 960.883768] usb usb2: Manufacturer: Linux 2.6.31r4 ehci_hcd [ 960.883772] usb usb2: SerialNumber: 0000:00:13.2 [ 960.883852] usb usb2: uevent [ 960.883976] usb usb2: usb_probe_device [ 960.883982] usb usb2: configuration #1 chosen from 1 choice [ 960.883995] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 960.884029] usb 2-0:1.0: uevent [ 960.884114] hub 2-0:1.0: usb_probe_interface [ 960.884118] hub 2-0:1.0: usb_probe_interface - got id [ 960.884122] hub 2-0:1.0: USB hub found [ 960.884136] hub 2-0:1.0: 6 ports detected [ 960.884140] hub 2-0:1.0: standalone hub [ 960.884143] hub 2-0:1.0: no power switching (usb 1.0) [ 960.884147] hub 2-0:1.0: individual port over-current protection [ 960.884152] hub 2-0:1.0: power on to power good time: 20ms [ 960.884160] hub 2-0:1.0: local power source is good [ 960.884165] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 960.973704] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT [ 960.973713] hub 1-0:1.0: port 2: status 0501 change 0001 [ 960.983729] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 961.073705] hub 1-0:1.0: state 7 ports 6 chg 0004 evt 0000 [ 961.073725] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 961.127893] ehci_hcd 0000:00:12.2: port 2 high speed [ 961.127905] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 961.181195] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 961.234546] ehci_hcd 0000:00:12.2: port 2 high speed [ 961.234557] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 961.306035] usb 1-2: default language 0x0409 [ 961.306410] usb 1-2: udev 2, busnum 1, minor = 1 [ 961.306415] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 [ 961.306420] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 961.306426] usb 1-2: Product: USB2.0 Hub [ 961.306529] usb 1-2: uevent [ 961.306558] usb 1-2: usb_probe_device [ 961.306565] usb 1-2: configuration #1 chosen from 1 choice [ 961.308320] usb 1-2: adding 1-2:1.0 (config #1, interface 0) [ 961.308363] usb 1-2:1.0: uevent [ 961.308390] hub 1-2:1.0: usb_probe_interface [ 961.308394] hub 1-2:1.0: usb_probe_interface - got id [ 961.308398] hub 1-2:1.0: USB hub found [ 961.308919] hub 1-2:1.0: 4 ports detected [ 961.308923] hub 1-2:1.0: standalone hub [ 961.308927] hub 1-2:1.0: individual port power switching [ 961.308931] hub 1-2:1.0: individual port over-current protection [ 961.308935] hub 1-2:1.0: Single TT [ 961.308940] hub 1-2:1.0: TT requires at most 32 FS bit times (2664 ns) [ 961.308944] hub 1-2:1.0: Port indicators are supported [ 961.308948] hub 1-2:1.0: power on to power good time: 100ms [ 961.309409] hub 1-2:1.0: local power source is good [ 961.309414] hub 1-2:1.0: enabling power on all ports [ 961.411788] hub 1-2:1.0: port 2: status 0301 change 0001 [ 961.511193] usb 1-2: link qh256-0001/ffff8800c7592180 start 1 [1/0 us] [ 961.511213] hub 1-2:1.0: state 7 ports 4 chg 0004 evt 0000 [ 961.511547] hub 1-2:1.0: port 2, status 0301, change 0000, 1.5 Mb/s [ 961.578584] usb 1-2.2: new low speed USB device using ehci_hcd and address 3 [ 961.665692] usb 1-2.2: skipped 1 descriptor after interface [ 961.665700] usb 1-2.2: skipped 1 descriptor after interface [ 961.666184] usb 1-2.2: default language 0x0409 [ 961.668423] usb 1-2.2: udev 3, busnum 1, minor = 2 [ 961.668429] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c518 [ 961.668435] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 961.668440] usb 1-2.2: Product: USB Receiver [ 961.668444] usb 1-2.2: Manufacturer: Logitech [ 961.668552] usb 1-2.2: uevent [ 961.668578] usb 1-2.2: usb_probe_device [ 961.668584] usb 1-2.2: configuration #1 chosen from 1 choice [ 961.675815] usb 1-2.2: adding 1-2.2:1.0 (config #1, interface 0) [ 961.675868] usb 1-2.2:1.0: uevent [ 961.675901] usbhid 1-2.2:1.0: usb_probe_interface [ 961.675905] usbhid 1-2.2:1.0: usb_probe_interface - got id [ 961.676286] usb 1-2: clear tt buffer port 2, a3 ep0 t80008d42 [ 961.680639] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.0/input/input5 [ 961.680779] generic-usb 0003:046D:C518.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.2-2.2/input0 [ 961.680814] usb 1-2.2: adding 1-2.2:1.1 (config #1, interface 1) [ 961.680846] usb 1-2.2:1.1: uevent [ 961.680871] usbhid 1-2.2:1.1: usb_probe_interface [ 961.680875] usbhid 1-2.2:1.1: usb_probe_interface - got id [ 961.681662] usb 1-2: clear tt buffer port 2, a3 ep0 t80008d42 [ 961.688374] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.1/input/input6 [ 961.688398] usb 1-2.2: link qh8-0601/ffff8800c7592300 start 2 [1/2 us] [ 961.688454] drivers/usb/core/file.c: looking for a minor, starting at 96 [ 961.688561] generic-usb 0003:046D:C518.0004: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-2.2/input1 [ 961.688623] hub 1-2:1.0: state 7 ports 4 chg 0000 evt 0004 [ 961.696088] usb 1-2.2:1.0: uevent [ 961.696263] usb 1-2.2: uevent [ 961.696624] usb 1-2.2:1.0: uevent [ 961.696805] usb 1-2.2: uevent [ 961.698587] usb 1-2.2:1.0: uevent [ 961.699721] usb 1-2.2:1.0: uevent [ 961.699845] usb 1-2.2:1.1: uevent [ 961.700005] usb 1-2.2: uevent [ 961.705651] usb 1-2.2:1.1: uevent [ 961.724537] usb 1-2.2: link qh8-0601/ffff8800c75923c0 start 3 [1/2 us] Glück Auf, Volker -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists