[ 4641.872236] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4641.872244] ohci_hcd: block sizes: ed 80 td 96
[ 4641.872295]   alloc irq_desc for 16 on node -1
[ 4641.872300]   alloc kstat_irqs on node -1
[ 4641.872313] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4641.873309] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 4641.873523] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 4641.873550] ohci_hcd 0000:00:12.0: enabled AMD ISO transfers quirk
[ 4641.873576] ohci_hcd 0000:00:12.0: created debug files
[ 4641.873581] ohci_hcd 0000:00:12.0: supports USB remote wakeup
[ 4641.873612] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfddfe000
[ 4641.931511] ohci_hcd 0000:00:12.0: OHCI controller state
[ 4641.931523] ohci_hcd 0000:00:12.0: OHCI 1.0, NO legacy support registers
[ 4641.931533] ohci_hcd 0000:00:12.0: control 0x283 RWC HCFS=operational CBSR=3
[ 4641.931540] ohci_hcd 0000:00:12.0: cmdstatus 0x00000 SOC=0
[ 4641.931548] ohci_hcd 0000:00:12.0: intrstatus 0x00000004 SF
[ 4641.931555] ohci_hcd 0000:00:12.0: intrenable 0x8000001a MIE UE RD WDH
[ 4641.931567] ohci_hcd 0000:00:12.0: hcca frame #0005
[ 4641.931575] ohci_hcd 0000:00:12.0: roothub.a 02001203 POTPGT=2 NOCP NPS NDP=3(3)
[ 4641.931582] ohci_hcd 0000:00:12.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 4641.931589] ohci_hcd 0000:00:12.0: roothub.status 00008000 DRWE
[ 4641.931597] ohci_hcd 0000:00:12.0: roothub.portstatus [0] 0x00000100 PPS
[ 4641.931604] ohci_hcd 0000:00:12.0: roothub.portstatus [1] 0x00000100 PPS
[ 4641.931611] ohci_hcd 0000:00:12.0: roothub.portstatus [2] 0x00000100 PPS
[ 4641.931639] usb usb3: default language 0x0409
[ 4641.931653] usb usb3: udev 1, busnum 3, minor = 256
[ 4641.931658] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4641.931663] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4641.931668] usb usb3: Product: OHCI Host Controller
[ 4641.931672] usb usb3: Manufacturer: Linux 2.6.31r4 ohci_hcd
[ 4641.931676] usb usb3: SerialNumber: 0000:00:12.0
[ 4641.931795] usb usb3: uevent
[ 4641.931944] usb usb3: usb_probe_device
[ 4641.931950] usb usb3: configuration #1 chosen from 1 choice
[ 4641.931967] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 4641.932002] usb 3-0:1.0: uevent
[ 4641.932076] hub 3-0:1.0: usb_probe_interface
[ 4641.932081] hub 3-0:1.0: usb_probe_interface - got id
[ 4641.932087] hub 3-0:1.0: USB hub found
[ 4641.932105] hub 3-0:1.0: 3 ports detected
[ 4641.932109] hub 3-0:1.0: standalone hub
[ 4641.932113] hub 3-0:1.0: no power switching (usb 1.0)
[ 4641.932118] hub 3-0:1.0: no over-current protection
[ 4641.932122] hub 3-0:1.0: power on to power good time: 4ms
[ 4641.932133] hub 3-0:1.0: local power source is good
[ 4641.932138] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 4641.932239] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4641.932290] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 4641.932428] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 4641.932451] ohci_hcd 0000:00:12.1: enabled AMD ISO transfers quirk
[ 4641.932476] ohci_hcd 0000:00:12.1: created debug files
[ 4641.932482] ohci_hcd 0000:00:12.1: supports USB remote wakeup
[ 4641.932497] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfddfd000
[ 4641.988180] ohci_hcd 0000:00:12.1: OHCI controller state
[ 4641.988190] ohci_hcd 0000:00:12.1: OHCI 1.0, NO legacy support registers
[ 4641.988200] ohci_hcd 0000:00:12.1: control 0x283 RWC HCFS=operational CBSR=3
[ 4641.988208] ohci_hcd 0000:00:12.1: cmdstatus 0x00000 SOC=0
[ 4641.988215] ohci_hcd 0000:00:12.1: intrstatus 0x00000004 SF
[ 4641.988223] ohci_hcd 0000:00:12.1: intrenable 0x8000001a MIE UE RD WDH
[ 4641.988235] ohci_hcd 0000:00:12.1: hcca frame #0005
[ 4641.988243] ohci_hcd 0000:00:12.1: roothub.a 02001203 POTPGT=2 NOCP NPS NDP=3(3)
[ 4641.988250] ohci_hcd 0000:00:12.1: roothub.b 00000000 PPCM=0000 DR=0000
[ 4641.988256] ohci_hcd 0000:00:12.1: roothub.status 00008000 DRWE
[ 4641.988264] ohci_hcd 0000:00:12.1: roothub.portstatus [0] 0x00000100 PPS
[ 4641.988271] ohci_hcd 0000:00:12.1: roothub.portstatus [1] 0x00000100 PPS
[ 4641.988278] ohci_hcd 0000:00:12.1: roothub.portstatus [2] 0x00000100 PPS
[ 4641.988304] usb usb4: default language 0x0409
[ 4641.988317] usb usb4: udev 1, busnum 4, minor = 384
[ 4641.988322] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4641.988327] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4641.988332] usb usb4: Product: OHCI Host Controller
[ 4641.988336] usb usb4: Manufacturer: Linux 2.6.31r4 ohci_hcd
[ 4641.988340] usb usb4: SerialNumber: 0000:00:12.1
[ 4641.988445] usb usb4: uevent
[ 4641.989624] usb usb4: usb_probe_device
[ 4641.989631] usb usb4: configuration #1 chosen from 1 choice
[ 4641.989648] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 4641.989685] usb 4-0:1.0: uevent
[ 4641.989770] hub 4-0:1.0: usb_probe_interface
[ 4641.989775] hub 4-0:1.0: usb_probe_interface - got id
[ 4641.989780] hub 4-0:1.0: USB hub found
[ 4641.989797] hub 4-0:1.0: 3 ports detected
[ 4641.989801] hub 4-0:1.0: standalone hub
[ 4641.989805] hub 4-0:1.0: no power switching (usb 1.0)
[ 4641.989809] hub 4-0:1.0: no over-current protection
[ 4641.989814] hub 4-0:1.0: power on to power good time: 4ms
[ 4641.989824] hub 4-0:1.0: local power source is good
[ 4641.989830] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 4641.989929] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4641.989975] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 4641.990115] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 4641.990137] ohci_hcd 0000:00:13.0: enabled AMD ISO transfers quirk
[ 4641.990165] ohci_hcd 0000:00:13.0: created debug files
[ 4641.990170] ohci_hcd 0000:00:13.0: supports USB remote wakeup
[ 4641.990202] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfddfc000
[ 4642.030839] hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000
[ 4642.048175] ohci_hcd 0000:00:13.0: OHCI controller state
[ 4642.048184] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers
[ 4642.048193] ohci_hcd 0000:00:13.0: control 0x283 RWC HCFS=operational CBSR=3
[ 4642.048200] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
[ 4642.048207] ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
[ 4642.048214] ohci_hcd 0000:00:13.0: intrenable 0x8000001a MIE UE RD WDH
[ 4642.048227] ohci_hcd 0000:00:13.0: hcca frame #0005
[ 4642.048234] ohci_hcd 0000:00:13.0: roothub.a 02001203 POTPGT=2 NOCP NPS NDP=3(3)
[ 4642.048241] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 4642.048247] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
[ 4642.048255] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
[ 4642.048262] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS
[ 4642.048269] ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS
[ 4642.048293] usb usb5: default language 0x0409
[ 4642.048306] usb usb5: udev 1, busnum 5, minor = 512
[ 4642.048310] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 4642.048315] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4642.048320] usb usb5: Product: OHCI Host Controller
[ 4642.048324] usb usb5: Manufacturer: Linux 2.6.31r4 ohci_hcd
[ 4642.048328] usb usb5: SerialNumber: 0000:00:13.0
[ 4642.048428] usb usb5: uevent
[ 4642.048551] usb usb5: usb_probe_device
[ 4642.048556] usb usb5: configuration #1 chosen from 1 choice
[ 4642.048571] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 4642.048605] usb 5-0:1.0: uevent
[ 4642.048674] hub 5-0:1.0: usb_probe_interface
[ 4642.048679] hub 5-0:1.0: usb_probe_interface - got id
[ 4642.048684] hub 5-0:1.0: USB hub found
[ 4642.048701] hub 5-0:1.0: 3 ports detected
[ 4642.048704] hub 5-0:1.0: standalone hub
[ 4642.048708] hub 5-0:1.0: no power switching (usb 1.0)
[ 4642.048712] hub 5-0:1.0: no over-current protection
[ 4642.048717] hub 5-0:1.0: power on to power good time: 4ms
[ 4642.048727] hub 5-0:1.0: local power source is good
[ 4642.048731] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 4642.048827] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4642.048864] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 4642.048997] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 4642.049016] ohci_hcd 0000:00:13.1: enabled AMD ISO transfers quirk
[ 4642.049041] ohci_hcd 0000:00:13.1: created debug files
[ 4642.049046] ohci_hcd 0000:00:13.1: supports USB remote wakeup
[ 4642.049060] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfddf7000
[ 4642.090842] hub 4-0:1.0: state 7 ports 3 chg 0000 evt 0000
[ 4642.104844] ohci_hcd 0000:00:13.1: OHCI controller state
[ 4642.104853] ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers
[ 4642.104862] ohci_hcd 0000:00:13.1: control 0x283 RWC HCFS=operational CBSR=3
[ 4642.104869] ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0
[ 4642.104876] ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF
[ 4642.104883] ohci_hcd 0000:00:13.1: intrenable 0x8000001a MIE UE RD WDH
[ 4642.104895] ohci_hcd 0000:00:13.1: hcca frame #0005
[ 4642.104902] ohci_hcd 0000:00:13.1: roothub.a 02001203 POTPGT=2 NOCP NPS NDP=3(3)
[ 4642.104909] ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000
[ 4642.104915] ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE
[ 4642.104923] ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00000100 PPS
[ 4642.104930] ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS
[ 4642.104937] ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00000100 PPS
[ 4642.104960] usb usb6: default language 0x0409
[ 4642.104973] usb usb6: udev 1, busnum 6, minor = 640
[ 4642.104977] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 4642.104982] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4642.104987] usb usb6: Product: OHCI Host Controller
[ 4642.104991] usb usb6: Manufacturer: Linux 2.6.31r4 ohci_hcd
[ 4642.104995] usb usb6: SerialNumber: 0000:00:13.1
[ 4642.105095] usb usb6: uevent
[ 4642.106222] usb usb6: usb_probe_device
[ 4642.106229] usb usb6: configuration #1 chosen from 1 choice
[ 4642.106245] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 4642.106278] usb 6-0:1.0: uevent
[ 4642.106361] hub 6-0:1.0: usb_probe_interface
[ 4642.106365] hub 6-0:1.0: usb_probe_interface - got id
[ 4642.106370] hub 6-0:1.0: USB hub found
[ 4642.106386] hub 6-0:1.0: 3 ports detected
[ 4642.106389] hub 6-0:1.0: standalone hub
[ 4642.106393] hub 6-0:1.0: no power switching (usb 1.0)
[ 4642.106397] hub 6-0:1.0: no over-current protection
[ 4642.106401] hub 6-0:1.0: power on to power good time: 4ms
[ 4642.106411] hub 6-0:1.0: local power source is good
[ 4642.106416] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 4642.106511] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4642.106551] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 4642.106690] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 4642.106710] ohci_hcd 0000:00:14.5: enabled AMD ISO transfers quirk
[ 4642.106737] ohci_hcd 0000:00:14.5: created debug files
[ 4642.106741] ohci_hcd 0000:00:14.5: supports USB remote wakeup
[ 4642.106756] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfddf5000
[ 4642.147506] hub 5-0:1.0: state 7 ports 3 chg 0000 evt 0000
[ 4642.164847] ohci_hcd 0000:00:14.5: OHCI controller state
[ 4642.164856] ohci_hcd 0000:00:14.5: OHCI 1.0, NO legacy support registers
[ 4642.164865] ohci_hcd 0000:00:14.5: control 0x283 RWC HCFS=operational CBSR=3
[ 4642.164872] ohci_hcd 0000:00:14.5: cmdstatus 0x00000 SOC=0
[ 4642.164879] ohci_hcd 0000:00:14.5: intrstatus 0x00000004 SF
[ 4642.164886] ohci_hcd 0000:00:14.5: intrenable 0x8000001a MIE UE RD WDH
[ 4642.164898] ohci_hcd 0000:00:14.5: hcca frame #0005
[ 4642.164905] ohci_hcd 0000:00:14.5: roothub.a 02001202 POTPGT=2 NOCP NPS NDP=2(2)
[ 4642.164912] ohci_hcd 0000:00:14.5: roothub.b 00000000 PPCM=0000 DR=0000
[ 4642.164918] ohci_hcd 0000:00:14.5: roothub.status 00008000 DRWE
[ 4642.164926] ohci_hcd 0000:00:14.5: roothub.portstatus [0] 0x00000100 PPS
[ 4642.164933] ohci_hcd 0000:00:14.5: roothub.portstatus [1] 0x00000100 PPS
[ 4642.164956] usb usb7: default language 0x0409
[ 4642.164970] usb usb7: udev 1, busnum 7, minor = 768
[ 4642.164974] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 4642.164979] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4642.164984] usb usb7: Product: OHCI Host Controller
[ 4642.164988] usb usb7: Manufacturer: Linux 2.6.31r4 ohci_hcd
[ 4642.164992] usb usb7: SerialNumber: 0000:00:14.5
[ 4642.165094] usb usb7: uevent
[ 4642.166223] usb usb7: usb_probe_device
[ 4642.166230] usb usb7: configuration #1 chosen from 1 choice
[ 4642.166246] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 4642.166283] usb 7-0:1.0: uevent
[ 4642.166369] hub 7-0:1.0: usb_probe_interface
[ 4642.166373] hub 7-0:1.0: usb_probe_interface - got id
[ 4642.166378] hub 7-0:1.0: USB hub found
[ 4642.166394] hub 7-0:1.0: 2 ports detected
[ 4642.166398] hub 7-0:1.0: standalone hub
[ 4642.166402] hub 7-0:1.0: no power switching (usb 1.0)
[ 4642.166406] hub 7-0:1.0: no over-current protection
[ 4642.166410] hub 7-0:1.0: power on to power good time: 4ms
[ 4642.166420] hub 7-0:1.0: local power source is good
[ 4642.166425] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 4642.207505] hub 6-0:1.0: state 7 ports 3 chg 0000 evt 0000
[ 4642.267500] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 4643.097483] ohci_hcd 0000:00:12.0: auto-stop root hub
[ 4643.097504] ohci_hcd 0000:00:12.1: auto-stop root hub
[ 4643.097521] ohci_hcd 0000:00:13.0: auto-stop root hub
[ 4643.347483] ohci_hcd 0000:00:13.1: auto-stop root hub
[ 4643.347501] ohci_hcd 0000:00:14.5: auto-stop root hub
[ 4644.317487] hub 3-0:1.0: hub_suspend
[ 4644.317500] usb usb3: bus auto-suspend
[ 4644.317506] ohci_hcd 0000:00:12.0: suspend root hub
[ 4644.317516] hub 4-0:1.0: hub_suspend
[ 4644.317521] usb usb4: bus auto-suspend
[ 4644.317526] ohci_hcd 0000:00:12.1: suspend root hub
[ 4644.317534] hub 5-0:1.0: hub_suspend
[ 4644.317539] usb usb5: bus auto-suspend
[ 4644.317544] ohci_hcd 0000:00:13.0: suspend root hub
[ 4644.317552] hub 6-0:1.0: hub_suspend
[ 4644.317557] usb usb6: bus auto-suspend
[ 4644.317562] ohci_hcd 0000:00:13.1: suspend root hub
[ 4644.317569] hub 7-0:1.0: hub_suspend
[ 4644.317574] usb usb7: bus auto-suspend
[ 4644.317579] ohci_hcd 0000:00:14.5: suspend root hub
[ 4648.692184] usb usb2: usb resume
[ 4648.692193] ehci_hcd 0000:00:13.2: resume root hub
[ 4648.717486] hub 2-0:1.0: hub_resume
[ 4648.717514] ehci_hcd 0000:00:13.2: GetStatus port 3 status 001403 POWER sig=k CSC CONNECT
[ 4648.717521] hub 2-0:1.0: port 3: status 0501 change 0001
[ 4648.820828] hub 2-0:1.0: state 7 ports 6 chg 0008 evt 0000
[ 4648.820846] hub 2-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
[ 4648.820871] ehci_hcd 0000:00:13.2: port 3 low speed --> companion
[ 4648.820930] usb usb5: usb resume
[ 4648.830402] ohci_hcd 0000:00:13.0: wakeup root hub
[ 4648.874163] ehci_hcd 0000:00:13.2: GetStatus port 3 status 001002 POWER sig=se0 CSC
[ 4648.874190] hub 2-0:1.0: unable to enumerate USB device on port 3
[ 4648.874202] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0008
[ 4648.895393] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0008
[ 4648.895410] ehci_hcd 0000:00:13.2: GetStatus port 3 status 001003 POWER sig=se0 CSC CONNECT
[ 4648.895424] hub 2-0:1.0: port 3, status 0501, change 0001, 480 Mb/s
[ 4648.900403] hub 5-0:1.0: hub_resume
[ 4648.900428] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00010100 CSC PPS
[ 4648.924159] ehci_hcd 0000:00:13.2: GetStatus port 3 status 001403 POWER sig=k CSC CONNECT
[ 4649.044158] hub 2-0:1.0: debounce: port 3: total 125ms stable 100ms status 0x501
[ 4649.044175] ehci_hcd 0000:00:13.2: port 3 low speed --> companion
[ 4649.097491] ehci_hcd 0000:00:13.2: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC
[ 4649.097524] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0008
[ 4649.097534] hub 5-0:1.0: state 7 ports 3 chg 0000 evt 0008
[ 4649.097545] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS
[ 4649.097554] hub 5-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s
[ 4649.217491] hub 5-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301
[ 4649.240849] ohci_hcd 0000:00:13.0: port[2] reset timeout, stat 00000311
[ 4649.294156] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
[ 4649.347499] usb 5-3: new low speed USB device using ohci_hcd and address 2
[ 4649.370848] ohci_hcd 0000:00:13.0: port[2] reset timeout, stat 00000313
[ 4649.424156] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
[ 4649.501243] usb 5-3: skipped 1 descriptor after interface
[ 4649.501251] usb 5-3: skipped 1 descriptor after interface
[ 4649.503247] usb 5-3: default language 0x0409
[ 4649.508251] usb 5-3: udev 2, busnum 5, minor = 513
[ 4649.508258] usb 5-3: New USB device found, idVendor=046d, idProduct=c518
[ 4649.508263] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4649.508268] usb 5-3: Product: USB Receiver
[ 4649.508272] usb 5-3: Manufacturer: Logitech
[ 4649.508390] usb 5-3: uevent
[ 4649.509935] usb 5-3: usb_probe_device
[ 4649.509942] usb 5-3: configuration #1 chosen from 1 choice
[ 4649.519242] usb 5-3: adding 5-3:1.0 (config #1, interface 0)
[ 4649.519302] usb 5-3:1.0: uevent
[ 4649.519422] usbhid 5-3:1.0: usb_probe_interface
[ 4649.519428] usbhid 5-3:1.0: usb_probe_interface - got id
[ 4649.526229] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/input/input5
[ 4649.526542] generic-usb 0003:046D:C518.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-3/input0
[ 4649.526582] usb 5-3: adding 5-3:1.1 (config #1, interface 1)
[ 4649.526626] usb 5-3:1.1: uevent
[ 4649.527441] usbhid 5-3:1.1: usb_probe_interface
[ 4649.527448] usbhid 5-3:1.1: usb_probe_interface - got id
[ 4649.531694] usb 5-3:1.0: uevent
[ 4649.531865] usb 5-3: uevent
[ 4649.532064] usb 5-3:1.0: uevent
[ 4649.532234] usb 5-3: uevent
[ 4649.533871] usb 5-3:1.0: uevent
[ 4649.534280] usb 5-3:1.0: uevent
[ 4649.537474] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.1/input/input6
[ 4649.537553] drivers/usb/core/file.c: looking for a minor, starting at 96
[ 4649.537671] generic-usb 0003:046D:C518.0004: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-3/input1
[ 4649.537731] hub 5-0:1.0: state 7 ports 3 chg 0000 evt 0008
[ 4649.543613] usb 5-3:1.1: uevent
[ 4649.543769] usb 5-3: uevent
[ 4649.546227] usb 5-3:1.1: uevent
[ 4651.317487] hub 2-0:1.0: hub_suspend
[ 4651.317501] usb usb2: bus auto-suspend
[ 4651.317507] ehci_hcd 0000:00:13.2: suspend root hub
[ 4772.774530] usb usb7: usb auto-resume
[ 4772.774544] ohci_hcd 0000:00:14.5: resume root hub
[ 4772.844137] hub 7-0:1.0: hub_resume
[ 4772.844172] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 4772.844290] usb usb6: usb auto-resume
[ 4772.844300] ohci_hcd 0000:00:13.1: resume root hub
[ 4772.914136] hub 6-0:1.0: hub_resume
[ 4772.914170] hub 6-0:1.0: state 7 ports 3 chg 0000 evt 0000
[ 4772.914379] usb usb4: usb auto-resume
[ 4772.914389] ohci_hcd 0000:00:12.1: resume root hub
[ 4772.984136] hub 4-0:1.0: hub_resume
[ 4772.984169] hub 4-0:1.0: state 7 ports 3 chg 0000 evt 0000
[ 4772.984274] usb usb3: usb auto-resume
[ 4772.984282] ohci_hcd 0000:00:12.0: resume root hub
[ 4773.054136] hub 3-0:1.0: hub_resume
[ 4773.054169] hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000
[ 4773.054272] usb usb2: usb auto-resume
[ 4773.054279] ehci_hcd 0000:00:13.2: resume root hub
[ 4773.104136] hub 2-0:1.0: hub_resume
[ 4773.104176] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 4773.104280] usb usb1: usb auto-resume
[ 4773.104287] ehci_hcd 0000:00:12.2: resume root hub
[ 4773.130803] hub 1-0:1.0: hub_resume
[ 4773.130823] hub 1-0:1.0: port 2: status 0507 change 0000
[ 4773.130848] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 4773.130864] usb 1-2: usb auto-resume
[ 4773.160823] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
[ 4773.174145] usb 1-2: finish resume
[ 4773.174559] hub 1-2:1.0: hub_resume
[ 4773.175562] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800180 schedule
[ 4773.175570] usb 1-2: link qh256-0001/ffff8800c7800180 start 1 [1/0 us]
[ 4773.175590] hub 1-2:1.0: state 7 ports 4 chg 0000 evt 0000
[ 4773.847469] ohci_hcd 0000:00:14.5: auto-stop root hub
[ 4774.097471] ohci_hcd 0000:00:13.1: auto-stop root hub
[ 4774.097493] ohci_hcd 0000:00:12.1: auto-stop root hub
[ 4774.097510] ohci_hcd 0000:00:12.0: auto-stop root hub
[ 4775.317479] hub 7-0:1.0: hub_suspend
[ 4775.317494] usb usb7: bus auto-suspend
[ 4775.317502] ohci_hcd 0000:00:14.5: suspend root hub
[ 4775.317513] hub 6-0:1.0: hub_suspend
[ 4775.317518] usb usb6: bus auto-suspend
[ 4775.317523] ohci_hcd 0000:00:13.1: suspend root hub
[ 4775.317531] hub 4-0:1.0: hub_suspend
[ 4775.317536] usb usb4: bus auto-suspend
[ 4775.317541] ohci_hcd 0000:00:12.1: suspend root hub
[ 4775.317549] hub 3-0:1.0: hub_suspend
[ 4775.317555] usb usb3: bus auto-suspend
[ 4775.317559] ohci_hcd 0000:00:12.0: suspend root hub
[ 4775.317568] hub 2-0:1.0: hub_suspend
[ 4775.317573] usb usb2: bus auto-suspend
[ 4775.317577] ehci_hcd 0000:00:13.2: suspend root hub
[ 4775.318450] hub 1-2:1.0: hub_suspend
[ 4775.318459] usb 1-2: unlink qh256-0001/ffff8800c7800180 start 1 [1/0 us]
[ 4775.318719] usb 1-2: usb auto-suspend
[ 4778.317505] hub 1-0:1.0: hub_suspend
[ 4778.317519] usb usb1: bus auto-suspend
[ 4778.317524] ehci_hcd 0000:00:12.2: suspend root hub
[ 4781.882644] usb usb7: usb auto-resume
[ 4781.882652] ohci_hcd 0000:00:14.5: resume root hub
[ 4781.951945] hub 7-0:1.0: hub_resume
[ 4781.951980] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 4781.952095] usb usb6: usb auto-resume
[ 4781.952105] ohci_hcd 0000:00:13.1: resume root hub
[ 4782.020803] hub 6-0:1.0: hub_resume
[ 4782.020838] hub 6-0:1.0: state 7 ports 3 chg 0000 evt 0000
[ 4782.021048] usb usb4: usb auto-resume
[ 4782.021057] ohci_hcd 0000:00:12.1: resume root hub
[ 4782.090803] hub 4-0:1.0: hub_resume
[ 4782.090837] hub 4-0:1.0: state 7 ports 3 chg 0000 evt 0000
[ 4782.090942] usb usb3: usb auto-resume
[ 4782.090951] ohci_hcd 0000:00:12.0: resume root hub
[ 4782.160803] hub 3-0:1.0: hub_resume
[ 4782.160837] hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000
[ 4782.160940] usb usb2: usb auto-resume
[ 4782.160947] ehci_hcd 0000:00:13.2: resume root hub
[ 4782.210802] hub 2-0:1.0: hub_resume
[ 4782.210843] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 4782.210952] usb usb1: usb auto-resume
[ 4782.210959] ehci_hcd 0000:00:12.2: resume root hub
[ 4782.237469] hub 1-0:1.0: hub_resume
[ 4782.237489] hub 1-0:1.0: port 2: status 0507 change 0000
[ 4782.237514] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 4782.237530] usb 1-2: usb auto-resume
[ 4782.267493] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
[ 4782.280822] usb 1-2: finish resume
[ 4782.281231] hub 1-2:1.0: hub_resume
[ 4782.282234] ehci_hcd 0000:00:12.2: reused qh ffff8800c7800180 schedule
[ 4782.282241] usb 1-2: link qh256-0001/ffff8800c7800180 start 1 [1/0 us]
[ 4782.282261] hub 1-2:1.0: state 7 ports 4 chg 0000 evt 0000
[ 4783.097469] ohci_hcd 0000:00:14.5: auto-stop root hub
[ 4783.097491] ohci_hcd 0000:00:13.1: auto-stop root hub
[ 4783.097508] ohci_hcd 0000:00:12.1: auto-stop root hub
[ 4783.347470] ohci_hcd 0000:00:12.0: auto-stop root hub
[ 4784.317479] hub 7-0:1.0: hub_suspend
[ 4784.317495] usb usb7: bus auto-suspend
[ 4784.317503] ohci_hcd 0000:00:14.5: suspend root hub
[ 4784.317513] hub 6-0:1.0: hub_suspend
[ 4784.317519] usb usb6: bus auto-suspend
[ 4784.317524] ohci_hcd 0000:00:13.1: suspend root hub
[ 4784.317532] hub 4-0:1.0: hub_suspend
[ 4784.317538] usb usb4: bus auto-suspend
[ 4784.317543] ohci_hcd 0000:00:12.1: suspend root hub
[ 4784.317551] hub 3-0:1.0: hub_suspend
[ 4784.317556] usb usb3: bus auto-suspend
[ 4784.317561] ohci_hcd 0000:00:12.0: suspend root hub
[ 4784.317569] hub 2-0:1.0: hub_suspend
[ 4784.317574] usb usb2: bus auto-suspend
[ 4784.317579] ehci_hcd 0000:00:13.2: suspend root hub
[ 4784.318109] hub 1-2:1.0: hub_suspend
[ 4784.318119] usb 1-2: unlink qh256-0001/ffff8800c7800180 start 1 [1/0 us]
[ 4784.318382] usb 1-2: usb auto-suspend
[ 4787.317475] hub 1-0:1.0: hub_suspend
[ 4787.317491] usb usb1: bus auto-suspend
[ 4787.317497] ehci_hcd 0000:00:12.2: suspend root hub