linux-kernel - Re: ipv4 regression in 2.6.31 ?

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20090916100028.654f7893@nehalam>
Date:	Wed, 16 Sep 2009 10:00:28 -0700
From:	Stephen Hemminger <shemminger@...tta.com>
To:	Jarek Poplawski <jarkao2@...il.com>
Cc:	David Miller <davem@...emloft.net>,
	Stephan von Krawczynski <skraw@...net.com>,
	Eric Dumazet <eric.dumazet@...il.com>,
	linux-kernel@...r.kernel.org,
	Linux Netdev List <netdev@...r.kernel.org>
Subject: Re: ipv4 regression in 2.6.31 ?

On Wed, 16 Sep 2009 05:23:04 +0000
Jarek Poplawski <jarkao2@...il.com> wrote:

> On Tue, Sep 15, 2009 at 03:57:19PM -0700, Stephen Hemminger wrote:
> > On Tue, 15 Sep 2009 08:13:55 +0000
> > Jarek Poplawski <jarkao2@...il.com> wrote:
> > 
> > > On 14-09-2009 18:31, Stephen Hemminger wrote:
> > > > On Mon, 14 Sep 2009 17:55:05 +0200
> > > > Stephan von Krawczynski <skraw@...net.com> wrote:
> > > > 
> > > >> On Mon, 14 Sep 2009 15:57:03 +0200
> > > >> Eric Dumazet <eric.dumazet@...il.com> wrote:
> > > >>
> > > >>> Stephan von Krawczynski a A~(c)crit :
> > > >>>> Hello all,
> > > ...
> > > >>> rp_filter - INTEGER
> > > >>>         0 - No source validation.
> > > >>>         1 - Strict mode as defined in RFC3704 Strict Reverse Path
> > > >>>             Each incoming packet is tested against the FIB and if the interface
> > > >>>             is not the best reverse path the packet check will fail.
> > > >>>             By default failed packets are discarded.
> > > >>>         2 - Loose mode as defined in RFC3704 Loose Reverse Path
> > > >>>             Each incoming packet's source address is also tested against the FIB
> > > >>>             and if the source address is not reachable via any interface
> > > >>>             the packet check will fail.
> > > ...
> > > > RP filter did not work correctly in 2.6.30. The code added to to the loose
> > > > mode caused a bug; the rp_filter value was being computed as:
> > > >   rp_filter = interface_value & all_value;
> > > > So in order to get reverse path filter both would have to be set.
> > > > 
> > > > In 2.6.31 this was change to:
> > > >    rp_filter = max(interface_value, all_value);
> > > > 
> > > > This was the intended behaviour, if user asks all interfaces to have rp
> > > > filtering turned on, then set /proc/sys/net/ipv4/conf/all/rp_filter = 1
> > > > or to turn on just one interface, set it for just that interface.
> > > 
> > > Alas this max() formula handles also cases where both values are set
> > > and it doesn't look very natural/"user friendly" to me. Especially
> > > with something like this: all_value = 2; interface_value = 1
> > > Why would anybody care to bother with interface_value in such a case?
> > > 
> > > "All" suggests "default" in this context, so I'd rather expect
> > > something like:
> > >     rp_filter = interface_value ? : all_value;
> > > which gives "the inteded behaviour" too, plus more...
> > > 
> > > We'd only need to add e.g.:
> > >  0 - Default ("all") validation. (No source validation if "all" is 0).
> > >  3 - No source validation on this interface.
> > 
> > More values == more confusion.
> > I chose the maxconf() method to make rp_filter consistent with other
> > multi valued variables (arp_announce and arp_ignore).
> 
> This additional value is not necessary (it'd give as superpowers).
> Max seems logical to me only when values are sorted (especially if
> max is the strictest).

The values had to be unsorted because of the requirement to retain
interface compatibility with older releases.
-- 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/