linux-kernel - Re: [PATCH] at91: use gpiolib calls for USB vbus pin on at91sam9g45

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Wed, 16 Sep 2009 23:53:28 +0200
From:	Jean-Christophe PLAGNIOL-VILLARD <plagnioj@...osoft.com>
To:	Nicolas Ferre <nicolas.ferre@...el.com>
Cc:	linux-usb@...r.kernel.org, avictor.za@...il.com,
	patrice.vilchez@...el.com, linux-kernel@...r.kernel.org,
	david-b@...bell.net, haavard.skinnemoen@...el.com,
	linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH] at91: use gpiolib calls for USB vbus pin on at91sam9g45

On 19:29 Wed 16 Sep     , Nicolas Ferre wrote:
> Change pin configuration for USB vbus on at91sam9g45: use the generic gpiolib
> call instead of the at91 specific one.
> Use gpio_request() function with same identifier for OHCI and EHCI hosts as
> they are sharing the same pin.
> 
> Signed-off-by: Nicolas Ferre <nicolas.ferre@...el.com>
> ---
> This patch is on top of at91sam9g45 USB integration one:
> "[PATCH 2/2] at91/USB: at91sam9g45 series USB host integration"
> http://lkml.org/lkml/2009/6/9/221
> 
>  arch/arm/mach-at91/at91sam9g45_devices.c |   12 ++++++++----
>  1 files changed, 8 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
> index 5be8cf2..7d939c0 100644
> --- a/arch/arm/mach-at91/at91sam9g45_devices.c
> +++ b/arch/arm/mach-at91/at91sam9g45_devices.c
> @@ -118,8 +118,10 @@ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
>  
>  	/* Enable VBus control for UHP ports */
>  	for (i = 0; i < data->ports; i++) {
> -		if (data->vbus_pin[i])
> -			at91_set_gpio_output(data->vbus_pin[i], 0);
> +		if (data->vbus_pin[i]) {
> +			gpio_request(data->vbus_pin[i], "usb host vbus");
> +			gpio_direction_output(data->vbus_pin[i], 0);
> +		}
>  	}
>  
>  	usbh_ohci_data = *data;
> @@ -173,8 +175,10 @@ void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
>  
>  	/* Enable VBus control for UHP ports */
>  	for (i = 0; i < data->ports; i++) {
> -		if (data->vbus_pin[i])
> -			at91_set_gpio_output(data->vbus_pin[i], 0);
> +		if (data->vbus_pin[i]) {
> +			gpio_request(data->vbus_pin[i], "usb host vbus");
> +			gpio_direction_output(data->vbus_pin[i], 0);
> +		}
>  	}
as you do the same think for ehci & ohci why not factorize it?

Best Regards,
J.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/