linux-kernel - [PATCH 1/4] serial: bfin_5xx: remove useless gpio handling with hard flow control

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1253224348-6996-1-git-send-email-vapier@gentoo.org>
Date:	Thu, 17 Sep 2009 17:52:25 -0400
From:	Mike Frysinger <vapier@...too.org>
To:	linux-serial@...r.kernel.org, Alan Cox <alan@...rguk.ukuu.org.uk>
Cc:	linux-kernel@...r.kernel.org,
	uclinux-dist-devel@...ckfin.uclinux.org,
	Sonic Zhang <sonic.zhang@...log.com>
Subject: [PATCH 1/4] serial: bfin_5xx: remove useless gpio handling with hard flow control

From: Sonic Zhang <sonic.zhang@...log.com>

For UARTs that have dedicated hardware flow control support, there will be
no gpios to request/free as they are part of the normal peripheral pins.

Signed-off-by: Sonic Zhang <sonic.zhang@...log.com>
Signed-off-by: Mike Frysinger <vapier@...too.org>
---
 drivers/serial/bfin_5xx.c |   16 +---------------
 1 files changed, 1 insertions(+), 15 deletions(-)

diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index b4a7650..1b7fd62 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -742,15 +742,6 @@ static int bfin_serial_startup(struct uart_port *port)
 			Status interrupt.\n");
 	}
 
-	if (uart->cts_pin >= 0) {
-		gpio_request(uart->cts_pin, DRIVER_NAME);
-		gpio_direction_output(uart->cts_pin, 1);
-	}
-	if (uart->rts_pin >= 0) {
-		gpio_request(uart->rts_pin, DRIVER_NAME);
-		gpio_direction_output(uart->rts_pin, 0);
-	}
-
 	/* CTS RTS PINs are negative assertive. */
 	UART_PUT_MCR(uart, ACTS);
 	UART_SET_IER(uart, EDSSI);
@@ -797,10 +788,6 @@ static void bfin_serial_shutdown(struct uart_port *port)
 		gpio_free(uart->rts_pin);
 #endif
 #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
-	if (uart->cts_pin >= 0)
-		gpio_free(uart->cts_pin);
-	if (uart->rts_pin >= 0)
-		gpio_free(uart->rts_pin);
 	if (UART_GET_IER(uart) && EDSSI)
 		free_irq(uart->status_irq, uart);
 #endif
@@ -1405,8 +1392,7 @@ static int bfin_serial_remove(struct platform_device *dev)
 			continue;
 		uart_remove_one_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
 		bfin_serial_ports[i].port.dev = NULL;
-#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \
-	defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS)
+#if defined(CONFIG_SERIAL_BFIN_CTSRTS)
 		gpio_free(bfin_serial_ports[i].cts_pin);
 		gpio_free(bfin_serial_ports[i].rts_pin);
 #endif
-- 
1.6.5.rc1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/