[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1253231273-16423-5-git-send-email-vapier@gentoo.org>
Date: Thu, 17 Sep 2009 19:47:53 -0400
From: Mike Frysinger <vapier@...too.org>
To: spi-devel-general@...ts.sourceforge.net,
David Brownell <dbrownell@...rs.sourceforge.net>
Cc: linux-kernel@...r.kernel.org,
uclinux-dist-devel@...ckfin.uclinux.org, Yi Li <yi.li@...log.com>
Subject: [PATCH 5/5] Blackfin SPI: clean up error handling in client setup
From: Yi Li <yi.li@...log.com>
Make sure we don't leak peripheral/gpio resources when an error occurs
during setup, and make sure we don't call kfree() twice on the same
object. Also add/fix some error messages in the process.
Signed-off-by: Yi Li <yi.li@...log.com>
Signed-off-by: Mike Frysinger <vapier@...too.org>
---
drivers/spi/spi_bfin5xx.c | 33 ++++++++++++++++++++++++++-------
1 files changed, 26 insertions(+), 7 deletions(-)
diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
index a8fc922..0dcc2ca 100644
--- a/drivers/spi/spi_bfin5xx.c
+++ b/drivers/spi/spi_bfin5xx.c
@@ -1118,8 +1118,10 @@ static int bfin_spi_setup(struct spi_device *spi)
chip = spi_get_ctldata(spi);
if (chip == NULL) {
chip = kzalloc(sizeof(*chip), GFP_KERNEL);
- if (!chip)
+ if (!chip) {
+ dev_err(&spi->dev, "cannot allocate chip data\n");
return -ENOMEM;
+ }
chip->enable_dma = 0;
chip_info = spi->controller_data;
@@ -1210,7 +1212,7 @@ static int bfin_spi_setup(struct spi_device *spi)
/* register dma irq handler */
ret = request_dma(drv_data->dma_channel, "BFIN_SPI_DMA");
if (ret) {
- dev_dbg(&spi->dev,
+ dev_err(&spi->dev,
"Unable to request BlackFin SPI DMA channel\n");
goto error;
}
@@ -1219,7 +1221,7 @@ static int bfin_spi_setup(struct spi_device *spi)
ret = set_dma_callback(drv_data->dma_channel,
bfin_spi_dma_irq_handler, drv_data);
if (ret) {
- dev_dbg(&spi->dev, "Unable to set dma callback\n");
+ dev_err(&spi->dev, "Unable to set dma callback\n");
goto error;
}
dma_disable_irq(drv_data->dma_channel);
@@ -1229,7 +1231,7 @@ static int bfin_spi_setup(struct spi_device *spi)
ret = request_irq(drv_data->spi_irq, bfin_spi_pio_irq_handler,
IRQF_DISABLED, "BFIN_SPI", drv_data);
if (ret) {
- printk(KERN_NOTICE "Unable to register spi IRQ\n");
+ dev_err(&spi->dev, "Unable to register spi IRQ\n");
goto error;
}
drv_data->irq_requested = 1;
@@ -1239,8 +1241,10 @@ static int bfin_spi_setup(struct spi_device *spi)
if (chip->chip_select_num == 0) {
ret = gpio_request(chip->cs_gpio, spi->modalias);
- if (ret)
+ if (ret) {
+ dev_err(&spi->dev, "gpio_request() error\n");
goto error;
+ }
gpio_direction_output(chip->cs_gpio, 1);
}
@@ -1256,8 +1260,10 @@ static int bfin_spi_setup(struct spi_device *spi)
chip->chip_select_num <= spi->master->num_chipselect) {
ret = peripheral_request(ssel[spi->master->bus_num]
[chip->chip_select_num-1], spi->modalias);
- if (ret)
+ if (ret) {
+ dev_err(&spi->dev, "peripheral_request() error\n");
goto error;
+ }
}
bfin_spi_cs_deactive(drv_data, chip);
@@ -1265,10 +1271,21 @@ static int bfin_spi_setup(struct spi_device *spi)
error:
if (ret) {
- kfree(chip);
if (drv_data->dma_requested)
free_dma(drv_data->dma_channel);
drv_data->dma_requested = 0;
+
+ if ((chip->chip_select_num > 0)
+ && (chip->chip_select_num <= spi->master->num_chipselect))
+ peripheral_free(ssel[spi->master->bus_num]
+ [chip->chip_select_num-1]);
+
+ if (chip->chip_select_num == 0)
+ gpio_free(chip->cs_gpio);
+
+ kfree(chip);
+ /* prevent free 'chip' twice */
+ spi_set_ctldata(spi, NULL);
}
return ret;
@@ -1294,6 +1311,8 @@ static void bfin_spi_cleanup(struct spi_device *spi)
gpio_free(chip->cs_gpio);
kfree(chip);
+ /* prevent free 'chip' twice */
+ spi_set_ctldata(spi, NULL);
}
static inline int bfin_spi_init_queue(struct driver_data *drv_data)
--
1.6.5.rc1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists