Message-Id: <1253793384-31158-18-git-send-email-tomi.valkeinen@nokia.com>
Date:	Thu, 24 Sep 2009 14:56:22 +0300
From:	Tomi Valkeinen <tomi.valkeinen@...ia.com>
To:	linux-kernel@...r.kernel.org
Cc:	linux-omap@...r.kernel.org,
	Tomi Valkeinen <tomi.valkeinen@...ia.com>
Subject: [PATCH 17/19] OMAP: DSS2: Taal DSI command mode panel driver

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@...ia.com>
---
 drivers/video/omap2/displays/Kconfig      |    6 +
 drivers/video/omap2/displays/Makefile     |    2 +
 drivers/video/omap2/displays/panel-taal.c |  900 +++++++++++++++++++++++++++++
 3 files changed, 908 insertions(+), 0 deletions(-)
 create mode 100644 drivers/video/omap2/displays/panel-taal.c

diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig
index 396905d..79d2861 100644
--- a/drivers/video/omap2/displays/Kconfig
+++ b/drivers/video/omap2/displays/Kconfig
@@ -19,4 +19,10 @@ config PANEL_SHARP_LS037V7DW01
         help
           LCD Panel used in TI's SDP3430 and EVM boards
 
+config PANEL_TAAL
+        tristate "Taal DSI Panel"
+        depends on OMAP2_DSS_DSI
+        help
+          Taal DSI command mode panel from TPO.
+
 endmenu
diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile
index a26bbd2..d44e765 100644
--- a/drivers/video/omap2/displays/Makefile
+++ b/drivers/video/omap2/displays/Makefile
@@ -1,3 +1,5 @@
 obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o
 obj-$(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) += panel-samsung-lte430wq-f0c.o
 obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
+
+obj-$(CONFIG_PANEL_TAAL) += panel-taal.o
diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
new file mode 100644
index 0000000..84f0d47
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -0,0 +1,900 @@
+/*
+ * Taal DSI command mode panel
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@...ia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*#define DEBUG*/
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/jiffies.h>
+#include <linux/sched.h>
+#include <linux/backlight.h>
+#include <linux/fb.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/completion.h>
+
+#include <mach/display.h>
+
+/* DSI Virtual channel. Hardcoded for now. */
+#define TCH 0
+
+#define DCS_READ_NUM_ERRORS	0x05
+#define DCS_READ_POWER_MODE	0x0a
+#define DCS_READ_MADCTL		0x0b
+#define DCS_READ_PIXEL_FORMAT	0x0c
+#define DCS_SLEEP_IN		0x10
+#define DCS_SLEEP_OUT		0x11
+#define DCS_DISPLAY_OFF		0x28
+#define DCS_DISPLAY_ON		0x29
+#define DCS_COLUMN_ADDR		0x2a
+#define DCS_PAGE_ADDR		0x2b
+#define DCS_MEMORY_WRITE	0x2c
+#define DCS_TEAR_OFF		0x34
+#define DCS_TEAR_ON		0x35
+#define DCS_MEM_ACC_CTRL	0x36
+#define DCS_PIXEL_FORMAT	0x3a
+#define DCS_BRIGHTNESS		0x51
+#define DCS_CTRL_DISPLAY	0x53
+#define DCS_WRITE_CABC		0x55
+#define DCS_READ_CABC		0x56
+#define DCS_GET_ID1		0xda
+#define DCS_GET_ID2		0xdb
+#define DCS_GET_ID3		0xdc
+
+struct taal_data {
+	struct backlight_device *bldev;
+
+	unsigned long	hw_guard_end;	/* next value of jiffies when we can
+					 * issue the next sleep in/out command
+					 */
+	unsigned long	hw_guard_wait;	/* max guard time in jiffies */
+
+	struct omap_dss_device *dssdev;
+
+	bool enabled;
+	u8 rotate;
+	bool mirror;
+
+	bool te_enabled;
+	bool use_ext_te;
+	struct completion te_completion;
+
+	bool use_dsi_bl;
+
+	bool cabc_broken;
+	unsigned cabc_mode;
+
+	bool intro_printed;
+};
+
+static void hw_guard_start(struct taal_data *td, int guard_msec)
+{
+	td->hw_guard_wait = msecs_to_jiffies(guard_msec);
+	td->hw_guard_end = jiffies + td->hw_guard_wait;
+}
+
+static void hw_guard_wait(struct taal_data *td)
+{
+	unsigned long wait = td->hw_guard_end - jiffies;
+
+	if ((long)wait > 0 && wait <= td->hw_guard_wait) {
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(wait);
+	}
+}
+
+static int taal_dcs_read_1(u8 dcs_cmd, u8 *data)
+{
+	int r;
+	u8 buf[1];
+
+	r = dsi_vc_dcs_read(TCH, dcs_cmd, buf, 1);
+
+	if (r < 0)
+		return r;
+
+	*data = buf[0];
+
+	return 0;
+}
+
+static int taal_dcs_write_0(u8 dcs_cmd)
+{
+	return dsi_vc_dcs_write(TCH, &dcs_cmd, 1);
+}
+
+static int taal_dcs_write_1(u8 dcs_cmd, u8 param)
+{
+	u8 buf[2];
+	buf[0] = dcs_cmd;
+	buf[1] = param;
+	return dsi_vc_dcs_write(TCH, buf, 2);
+}
+
+static int taal_sleep_in(struct taal_data *td)
+
+{
+	u8 cmd;
+	int r;
+
+	hw_guard_wait(td);
+
+	cmd = DCS_SLEEP_IN;
+	r = dsi_vc_dcs_write_nosync(TCH, &cmd, 1);
+	if (r)
+		return r;
+
+	hw_guard_start(td, 120);
+
+	msleep(5);
+
+	return 0;
+}
+
+static int taal_sleep_out(struct taal_data *td)
+{
+	int r;
+
+	hw_guard_wait(td);
+
+	r = taal_dcs_write_0(DCS_SLEEP_OUT);
+	if (r)
+		return r;
+
+	hw_guard_start(td, 120);
+
+	msleep(5);
+
+	return 0;
+}
+
+static int taal_get_id(u8 *id1, u8 *id2, u8 *id3)
+{
+	int r;
+
+	r = taal_dcs_read_1(DCS_GET_ID1, id1);
+	if (r)
+		return r;
+	r = taal_dcs_read_1(DCS_GET_ID2, id2);
+	if (r)
+		return r;
+	r = taal_dcs_read_1(DCS_GET_ID3, id3);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static int taal_set_addr_mode(u8 rotate, bool mirror)
+{
+	int r;
+	u8 mode;
+	int b5, b6, b7;
+
+	r = taal_dcs_read_1(DCS_READ_MADCTL, &mode);
+	if (r)
+		return r;
+
+	switch (rotate) {
+	default:
+	case 0:
+		b7 = 0;
+		b6 = 0;
+		b5 = 0;
+		break;
+	case 1:
+		b7 = 0;
+		b6 = 1;
+		b5 = 1;
+		break;
+	case 2:
+		b7 = 1;
+		b6 = 1;
+		b5 = 0;
+		break;
+	case 3:
+		b7 = 1;
+		b6 = 0;
+		b5 = 1;
+		break;
+	}
+
+	if (mirror)
+		b6 = !b6;
+
+	mode &= ~((1<<7) | (1<<6) | (1<<5));
+	mode |= (b7 << 7) | (b6 << 6) | (b5 << 5);
+
+	return taal_dcs_write_1(DCS_MEM_ACC_CTRL, mode);
+}
+
+static int taal_set_update_window(u16 x, u16 y, u16 w, u16 h)
+{
+	int r;
+	u16 x1 = x;
+	u16 x2 = x + w - 1;
+	u16 y1 = y;
+	u16 y2 = y + h - 1;
+
+	u8 buf[5];
+	buf[0] = DCS_COLUMN_ADDR;
+	buf[1] = (x1 >> 8) & 0xff;
+	buf[2] = (x1 >> 0) & 0xff;
+	buf[3] = (x2 >> 8) & 0xff;
+	buf[4] = (x2 >> 0) & 0xff;
+
+	r = dsi_vc_dcs_write_nosync(TCH, buf, sizeof(buf));
+	if (r)
+		return r;
+
+	buf[0] = DCS_PAGE_ADDR;
+	buf[1] = (y1 >> 8) & 0xff;
+	buf[2] = (y1 >> 0) & 0xff;
+	buf[3] = (y2 >> 8) & 0xff;
+	buf[4] = (y2 >> 0) & 0xff;
+
+	r = dsi_vc_dcs_write_nosync(TCH, buf, sizeof(buf));
+	if (r)
+		return r;
+
+	dsi_vc_send_bta_sync(TCH);
+
+	return r;
+}
+
+static int taal_bl_update_status(struct backlight_device *dev)
+{
+	struct omap_dss_device *dssdev = dev_get_drvdata(&dev->dev);
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	int r;
+	int level;
+
+	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
+			dev->props.power == FB_BLANK_UNBLANK)
+		level = dev->props.brightness;
+	else
+		level = 0;
+
+	dev_dbg(&dssdev->dev, "update brightness to %d\n", level);
+
+	if (td->use_dsi_bl) {
+		if (td->enabled) {
+			dsi_bus_lock();
+			r = taal_dcs_write_1(DCS_BRIGHTNESS, level);
+			dsi_bus_unlock();
+			if (r)
+				return r;
+		}
+	} else {
+		if (!dssdev->set_backlight)
+			return -EINVAL;
+
+		r = dssdev->set_backlight(dssdev, level);
+		if (r)
+			return r;
+	}
+
+	return 0;
+}
+
+static int taal_bl_get_intensity(struct backlight_device *dev)
+{
+	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
+			dev->props.power == FB_BLANK_UNBLANK)
+		return dev->props.brightness;
+
+	return 0;
+}
+
+static struct backlight_ops taal_bl_ops = {
+	.get_brightness = taal_bl_get_intensity,
+	.update_status  = taal_bl_update_status,
+};
+
+static void taal_get_timings(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings)
+{
+	*timings = dssdev->panel.timings;
+}
+
+static void taal_get_resolution(struct omap_dss_device *dssdev,
+		u16 *xres, u16 *yres)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+
+	if (td->rotate == 0 || td->rotate == 2) {
+		*xres = dssdev->panel.timings.x_res;
+		*yres = dssdev->panel.timings.y_res;
+	} else {
+		*yres = dssdev->panel.timings.x_res;
+		*xres = dssdev->panel.timings.y_res;
+	}
+}
+
+static irqreturn_t taal_te_isr(int irq, void *data)
+{
+	struct omap_dss_device *dssdev = data;
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+
+	complete_all(&td->te_completion);
+
+	return IRQ_HANDLED;
+}
+
+static ssize_t taal_num_errors_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	u8 errors;
+	int r;
+
+	if (td->enabled) {
+		dsi_bus_lock();
+		r = taal_dcs_read_1(DCS_READ_NUM_ERRORS, &errors);
+		dsi_bus_unlock();
+	} else {
+		r = -ENODEV;
+	}
+
+	if (r)
+		return r;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", errors);
+}
+
+static ssize_t taal_hw_revision_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	u8 id1, id2, id3;
+	int r;
+
+	if (td->enabled) {
+		dsi_bus_lock();
+		r = taal_get_id(&id1, &id2, &id3);
+		dsi_bus_unlock();
+	} else {
+		r = -ENODEV;
+	}
+
+	if (r)
+		return r;
+
+	return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x\n", id1, id2, id3);
+}
+
+static const char *cabc_modes[] = {
+	"off",		/* used also always when CABC is not supported */
+	"ui",
+	"still-image",
+	"moving-image",
+};
+
+static ssize_t show_cabc_mode(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	const char *mode_str;
+	int mode;
+	int len;
+
+	mode = td->cabc_mode;
+
+	mode_str = "unknown";
+	if (mode >= 0 && mode < ARRAY_SIZE(cabc_modes))
+		mode_str = cabc_modes[mode];
+	len = snprintf(buf, PAGE_SIZE, "%s\n", mode_str);
+
+	return len < PAGE_SIZE - 1 ? len : PAGE_SIZE - 1;
+}
+
+static ssize_t store_cabc_mode(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(cabc_modes); i++) {
+		if (sysfs_streq(cabc_modes[i], buf))
+			break;
+	}
+
+	if (i == ARRAY_SIZE(cabc_modes))
+		return -EINVAL;
+
+	if (td->enabled) {
+		dsi_bus_lock();
+		if (!td->cabc_broken)
+			taal_dcs_write_1(DCS_WRITE_CABC, i);
+		dsi_bus_unlock();
+	}
+
+	td->cabc_mode = i;
+
+	return count;
+}
+
+static ssize_t show_cabc_available_modes(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	int len;
+	int i;
+
+	for (i = 0, len = 0;
+	     len < PAGE_SIZE && i < ARRAY_SIZE(cabc_modes); i++)
+		len += snprintf(&buf[len], PAGE_SIZE - len, "%s%s%s",
+			i ? " " : "", cabc_modes[i],
+			i == ARRAY_SIZE(cabc_modes) - 1 ? "\n" : "");
+
+	return len < PAGE_SIZE ? len : PAGE_SIZE - 1;
+}
+
+static DEVICE_ATTR(num_dsi_errors, S_IRUGO, taal_num_errors_show, NULL);
+static DEVICE_ATTR(hw_revision, S_IRUGO, taal_hw_revision_show, NULL);
+static DEVICE_ATTR(cabc_mode, S_IRUGO | S_IWUSR,
+		show_cabc_mode, store_cabc_mode);
+static DEVICE_ATTR(cabc_available_modes, S_IRUGO,
+		show_cabc_available_modes, NULL);
+
+static struct attribute *taal_attrs[] = {
+	&dev_attr_num_dsi_errors.attr,
+	&dev_attr_hw_revision.attr,
+	&dev_attr_cabc_mode.attr,
+	&dev_attr_cabc_available_modes.attr,
+	NULL,
+};
+
+static struct attribute_group taal_attr_group = {
+	.attrs = taal_attrs,
+};
+
+static int taal_probe(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td;
+	struct backlight_device *bldev;
+	int r;
+
+	const struct omap_video_timings taal_panel_timings = {
+		.x_res		= 864,
+		.y_res		= 480,
+	};
+
+	dev_dbg(&dssdev->dev, "probe\n");
+
+	dssdev->panel.config = OMAP_DSS_LCD_TFT;
+	dssdev->panel.timings = taal_panel_timings;
+	dssdev->ctrl.pixel_size = 24;
+
+	td = kzalloc(sizeof(*td), GFP_KERNEL);
+	if (!td) {
+		r = -ENOMEM;
+		goto err0;
+	}
+
+	dev_set_drvdata(&dssdev->dev, td);
+
+	dssdev->get_timings = taal_get_timings;
+	dssdev->get_resolution = taal_get_resolution;
+
+	/* if no platform set_backlight() defined, presume DSI backlight
+	 * control */
+	if (!dssdev->set_backlight)
+		td->use_dsi_bl = true;
+
+	bldev = backlight_device_register("taal", &dssdev->dev, dssdev,
+			&taal_bl_ops);
+	if (IS_ERR(bldev)) {
+		r = PTR_ERR(bldev);
+		goto err1;
+	}
+
+	td->bldev = bldev;
+
+	bldev->props.fb_blank = FB_BLANK_UNBLANK;
+	bldev->props.power = FB_BLANK_UNBLANK;
+	if (td->use_dsi_bl) {
+		bldev->props.max_brightness = 255;
+		bldev->props.brightness = 255;
+	} else {
+		bldev->props.max_brightness = 127;
+		bldev->props.brightness = 127;
+	}
+
+	taal_bl_update_status(bldev);
+
+	if (dssdev->phy.dsi.ext_te) {
+		int gpio = dssdev->phy.dsi.ext_te_gpio;
+
+		r = gpio_request(gpio, "taal irq");
+		if (r) {
+			dev_err(&dssdev->dev, "GPIO request failed\n");
+			goto err2;
+		}
+
+		gpio_direction_input(gpio);
+
+		r = request_irq(gpio_to_irq(gpio), taal_te_isr,
+				IRQF_DISABLED | IRQF_TRIGGER_RISING,
+				"taal vsync", dssdev);
+
+		if (r) {
+			dev_err(&dssdev->dev, "IRQ request failed\n");
+			gpio_free(gpio);
+			goto err2;
+		}
+
+		init_completion(&td->te_completion);
+
+		td->use_ext_te = true;
+	}
+
+	r = sysfs_create_group(&dssdev->dev.kobj, &taal_attr_group);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to create sysfs files\n");
+		goto err3;
+	}
+
+	return 0;
+err3:
+	if (td->use_ext_te) {
+		int gpio = dssdev->phy.dsi.ext_te_gpio;
+		free_irq(gpio_to_irq(gpio), dssdev);
+		gpio_free(gpio);
+	}
+err2:
+	backlight_device_unregister(bldev);
+err1:
+	kfree(td);
+err0:
+	return r;
+}
+
+static void taal_remove(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	struct backlight_device *bldev;
+
+	dev_dbg(&dssdev->dev, "remove\n");
+
+	sysfs_remove_group(&dssdev->dev.kobj, &taal_attr_group);
+
+	if (td->use_ext_te) {
+		int gpio = dssdev->phy.dsi.ext_te_gpio;
+		free_irq(gpio_to_irq(gpio), dssdev);
+		gpio_free(gpio);
+	}
+
+	bldev = td->bldev;
+	bldev->props.power = FB_BLANK_POWERDOWN;
+	taal_bl_update_status(bldev);
+	backlight_device_unregister(bldev);
+
+	kfree(td);
+}
+
+static int taal_enable(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	u8 id1, id2, id3;
+	int r;
+
+	dev_dbg(&dssdev->dev, "enable\n");
+
+	if (dssdev->platform_enable) {
+		r = dssdev->platform_enable(dssdev);
+		if (r)
+			return r;
+	}
+
+	/* it seems we have to wait a bit until taal is ready */
+	msleep(5);
+
+	r = taal_sleep_out(td);
+	if (r)
+		return r;
+
+	r = taal_get_id(&id1, &id2, &id3);
+	if (r)
+		return r;
+
+	/* on early revisions CABC is broken */
+	if (id2 == 0x00 || id2 == 0xff || id2 == 0x81)
+		td->cabc_broken = true;
+
+	taal_dcs_write_1(DCS_BRIGHTNESS, 0xff);
+	taal_dcs_write_1(DCS_CTRL_DISPLAY, (1<<2) | (1<<5)); /* BL | BCTRL */
+
+	taal_dcs_write_1(DCS_PIXEL_FORMAT, 0x7); /* 24bit/pixel */
+
+	taal_set_addr_mode(td->rotate, td->mirror);
+	if (!td->cabc_broken)
+		taal_dcs_write_1(DCS_WRITE_CABC, td->cabc_mode);
+
+	taal_dcs_write_0(DCS_DISPLAY_ON);
+
+	td->enabled = 1;
+
+	if (!td->intro_printed) {
+		dev_info(&dssdev->dev, "revision %02x.%02x.%02x\n",
+				id1, id2, id3);
+		if (td->cabc_broken)
+			dev_info(&dssdev->dev,
+					"old Taal version, CABC disabled\n");
+		td->intro_printed = true;
+	}
+
+	return 0;
+}
+
+static void taal_disable(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+
+	dev_dbg(&dssdev->dev, "disable\n");
+
+	taal_dcs_write_0(DCS_DISPLAY_OFF);
+	taal_sleep_in(td);
+
+	/* wait a bit so that the message goes through */
+	msleep(10);
+
+	if (dssdev->platform_disable)
+		dssdev->platform_disable(dssdev);
+
+	td->enabled = 0;
+}
+
+static int taal_suspend(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	struct backlight_device *bldev = td->bldev;
+
+	bldev->props.power = FB_BLANK_POWERDOWN;
+	taal_bl_update_status(bldev);
+
+	return 0;
+}
+
+static int taal_resume(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	struct backlight_device *bldev = td->bldev;
+
+	bldev->props.power = FB_BLANK_UNBLANK;
+	taal_bl_update_status(bldev);
+
+	return 0;
+}
+
+static void taal_setup_update(struct omap_dss_device *dssdev,
+				    u16 x, u16 y, u16 w, u16 h)
+{
+	taal_set_update_window(x, y, w, h);
+}
+
+static int taal_enable_te(struct omap_dss_device *dssdev, bool enable)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	int r;
+
+	td->te_enabled = enable;
+
+	if (enable)
+		r = taal_dcs_write_1(DCS_TEAR_ON, 0);
+	else
+		r = taal_dcs_write_0(DCS_TEAR_OFF);
+
+	return r;
+}
+
+static int taal_wait_te(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	long wait = msecs_to_jiffies(500);
+
+	if (!td->use_ext_te || !td->te_enabled)
+		return 0;
+
+	INIT_COMPLETION(td->te_completion);
+	wait = wait_for_completion_timeout(&td->te_completion, wait);
+	if (wait == 0) {
+		dev_err(&dssdev->dev, "timeout waiting TE\n");
+		return -ETIME;
+	}
+
+	return 0;
+}
+
+static int taal_rotate(struct omap_dss_device *dssdev, u8 rotate)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	int r;
+
+	dev_dbg(&dssdev->dev, "rotate %d\n", rotate);
+
+	if (td->enabled) {
+		r = taal_set_addr_mode(rotate, td->mirror);
+
+		if (r)
+			return r;
+	}
+
+	td->rotate = rotate;
+
+	return 0;
+}
+
+static u8 taal_get_rotate(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	return td->rotate;
+}
+
+static int taal_mirror(struct omap_dss_device *dssdev, bool enable)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	int r;
+
+	dev_dbg(&dssdev->dev, "mirror %d\n", enable);
+
+	if (td->enabled) {
+		r = taal_set_addr_mode(td->rotate, enable);
+
+		if (r)
+			return r;
+	}
+
+	td->mirror = enable;
+
+	return 0;
+}
+
+static bool taal_get_mirror(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	return td->mirror;
+}
+
+static int taal_run_test(struct omap_dss_device *dssdev, int test_num)
+{
+	u8 id1, id2, id3;
+	int r;
+
+	r = taal_dcs_read_1(DCS_GET_ID1, &id1);
+	if (r)
+		return r;
+	r = taal_dcs_read_1(DCS_GET_ID2, &id2);
+	if (r)
+		return r;
+	r = taal_dcs_read_1(DCS_GET_ID3, &id3);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static int taal_memory_read(struct omap_dss_device *dssdev,
+		void *buf, size_t size,
+		u16 x, u16 y, u16 w, u16 h)
+{
+	int r;
+	int first = 1;
+	int plen;
+	unsigned buf_used = 0;
+
+	if (size < w * h * 3)
+		return -ENOMEM;
+
+	size = min(w * h * 3,
+			dssdev->panel.timings.x_res *
+			dssdev->panel.timings.y_res * 3);
+
+	/* plen 1 or 2 goes into short packet. until checksum error is fixed,
+	 * use short packets. plen 32 works, but bigger packets seem to cause
+	 * an error. */
+	if (size % 2)
+		plen = 1;
+	else
+		plen = 2;
+
+	taal_setup_update(dssdev, x, y, w, h);
+
+	r = dsi_vc_set_max_rx_packet_size(TCH, plen);
+	if (r)
+		return r;
+
+	while (buf_used < size) {
+		u8 dcs_cmd = first ? 0x2e : 0x3e;
+		first = 0;
+
+		r = dsi_vc_dcs_read(TCH, dcs_cmd,
+				buf + buf_used, size - buf_used);
+
+		if (r < 0) {
+			dev_err(&dssdev->dev, "read error\n");
+			goto err;
+		}
+
+		buf_used += r;
+
+		if (r < plen) {
+			dev_err(&dssdev->dev, "short read\n");
+			break;
+		}
+	}
+
+	r = buf_used;
+
+err:
+	dsi_vc_set_max_rx_packet_size(TCH, 1);
+
+	return r;
+}
+
+static struct omap_dss_driver taal_driver = {
+	.probe		= taal_probe,
+	.remove		= taal_remove,
+
+	.enable		= taal_enable,
+	.disable	= taal_disable,
+	.suspend	= taal_suspend,
+	.resume		= taal_resume,
+
+	.setup_update	= taal_setup_update,
+	.enable_te	= taal_enable_te,
+	.wait_for_te	= taal_wait_te,
+	.set_rotate	= taal_rotate,
+	.get_rotate	= taal_get_rotate,
+	.set_mirror	= taal_mirror,
+	.get_mirror	= taal_get_mirror,
+	.run_test	= taal_run_test,
+	.memory_read	= taal_memory_read,
+
+	.driver         = {
+		.name   = "taal",
+		.owner  = THIS_MODULE,
+	},
+};
+
+static int __init taal_init(void)
+{
+	omap_dss_register_driver(&taal_driver);
+
+	return 0;
+}
+
+static void __exit taal_exit(void)
+{
+	omap_dss_unregister_driver(&taal_driver);
+}
+
+module_init(taal_init);
+module_exit(taal_exit);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@...ia.com>");
+MODULE_DESCRIPTION("Taal Driver");
+MODULE_LICENSE("GPL");
-- 
1.6.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists