Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.31 (michich@leela) (gcc version 4.4.1 20090918 (Red Hat 4.4.1-15) (GCC) ) #15 SMP Thu Sep 24 15:46:34 CEST 2009 Command line: ro root=/dev/mapper/luks-c31ea7be-1f06-464c-be0b-5b4a16dec742 rhgb quiet SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us rd_plytheme=charge cpufreq.debug=3 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000077e70000 (usable) BIOS-e820: 0000000077e70000 - 0000000077e82000 (ACPI data) BIOS-e820: 0000000077e82000 - 0000000077e84000 (ACPI NVS) BIOS-e820: 0000000077e84000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) DMI present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x77e70 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DFFFF uncachable E0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 disabled 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-0000000077e70000 0000000000 - 0077e00000 page 2M 0077e00000 - 0077e70000 page 4k kernel direct mapping tables up to 77e70000 @ 10000-14000 RAMDISK: 37ba5000 - 37feff61 ACPI: RSDP 00000000000f82f0 00024 (v02 TOSINV) ACPI: XSDT 0000000077e7a36c 00054 (v01 TOSINV TOSINV00 06040000 INV 00000000) ACPI: FACP 0000000077e81a4a 000F4 (v03 ATI Herring 06040000 ATI 000F4240) ACPI: DSDT 0000000077e7a3c0 0768A (v01 TOSINV SB600 06040000 MSFT 0100000E) ACPI: FACS 0000000077e83fc0 00040 ACPI: SSDT 0000000077e81bb2 00210 (v01 PTLTD POWERNOW 06040000 LTP 00000001) ACPI: APIC 0000000077e81dc2 00054 (v01 TOSINV ? APIC 06040000 INV 00000000) ACPI: SLIC 0000000077e81e16 00176 (v01 TOSINV TOSINV00 06040000 INV 00000000) ACPI: MCFG 0000000077e81f8c 0003C (v01 TOSINV MCFG 06040000 INV 00000000) ACPI: HPET 0000000077e81fc8 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001) ACPI: Local APIC address 0xfee00000 Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-0000000077e70000 Bootmem setup node 0 0000000000000000-0000000077e70000 NODE_DATA [0000000000012000 - 0000000000029fff] bootmap [000000000002a000 - 0000000000038fcf] pages f (7 early reservations) ==> bootmem [0000000000 - 0077e70000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0002704708] TEXT DATA BSS ==> [0001000000 - 0002704708] #3 [0037ba5000 - 0037feff61] RAMDISK ==> [0037ba5000 - 0037feff61] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] #5 [0002705000 - 00027051c8] BRK ==> [0002705000 - 00027051c8] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] found SMP MP-table at [ffff8800000f83b0] f83b0 [ffffea0000000000-ffffea00031fffff] PMD -> [ffff880002c00000-ffff880005dfffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009d 0: 0x00000100 -> 0x00077e70 On node 0 totalpages: 491005 DMA zone: 104 pages used for memmap DMA zone: 103 pages reserved DMA zone: 3774 pages, LIFO batch:0 DMA32 zone: 12366 pages used for memmap DMA32 zone: 474658 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x43538301 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009d000 - 000000000009e000 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000 PM: Registered nosave memory: 00000000000d0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) Booting paravirtualized kernel on bare hardware NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 479 pages/cpu @ffff880005e00000 s1931032 r8192 d22760 u2097152 pcpu-alloc: s1931032 r8192 d22760 u2097152 alloc=1*2097152 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Node order, mobility grouping on. Total pages: 478432 Policy zone: DMA32 Kernel command line: ro root=/dev/mapper/luks-c31ea7be-1f06-464c-be0b-5b4a16dec742 rhgb quiet SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us rd_plytheme=charge cpufreq.debug=3 PID hash table entries: 4096 (order: 3, 32768 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Node 0: aperture @ cc2c000000 size 32 MB Aperture beyond 4GB. Ignoring. Memory: 1880664k/1964480k available (5327k kernel code, 460k absent, 83356k reserved, 3236k data, 3404k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:424 Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 6367 kB per task-struct memory footprint: 2688 bytes allocated 19660800 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups ODEBUG: 10 of 10 active objects replaced hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 1994.859 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.71 BogoMIPS (lpj=1994859) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0x0 -> Node 0 tseg: 0077f00000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks using C1E aware idle routine Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 23276 entries in 92 pages Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found apic 0 pin 0) ... ....... works. CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 01 lockdep: fixing up alternatives. Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3990.15 BogoMIPS (lpj=1995079) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 5 MCE banks System has AMD C1E enabled Switch to broadcast mode on CPU1 CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 01 Brought up 2 CPUs Total of 2 processors activated (7979.87 BogoMIPS). x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 Switch to broadcast mode on CPU0 regulator: core version 0.5 Time: 14:22:28 Date: 09/24/09 NET: Registered protocol family 16 node 0 link 0: io port [1000, fffff] TOM: 0000000080000000 aka 2048M node 0 link 0: mmio [f8100000, ffffffff] node 0 link 0: mmio [f8000000, f80fffff] node 0 link 0: mmio [f8000000, f7ffffff] node 0 link 0: mmio [f0000000, f7ffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [f0000000, efffffff] node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [80000000, dfffffff] bus: [00,ff] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [80000000, fcffffffff] bus: 00 index 2 mmio: [a0000, bffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 24 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - e18fffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x7, I/O: command/status = 0x66, data = 0x62 ACPI: Power Resource [PFA1] (off) ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:12.0: reg 10 io port: [0x8440-0x8447] pci 0000:00:12.0: reg 14 io port: [0x8434-0x8437] pci 0000:00:12.0: reg 18 io port: [0x8438-0x843f] pci 0000:00:12.0: reg 1c io port: [0x8430-0x8433] pci 0000:00:12.0: reg 20 io port: [0x8400-0x840f] pci 0000:00:12.0: reg 24 32bit mmio: [0xf8709000-0xf87093ff] pci 0000:00:12.0: set SATA to AHCI mode pci 0000:00:13.0: reg 10 32bit mmio: [0xf8704000-0xf8704fff] pci 0000:00:13.1: reg 10 32bit mmio: [0xf8705000-0xf8705fff] pci 0000:00:13.2: reg 10 32bit mmio: [0xf8706000-0xf8706fff] pci 0000:00:13.3: reg 10 32bit mmio: [0xf8707000-0xf8707fff] pci 0000:00:13.4: reg 10 32bit mmio: [0xf8708000-0xf8708fff] pci 0000:00:13.5: reg 10 32bit mmio: [0xf8709400-0xf87094ff] pci 0000:00:13.5: supports D1 D2 pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.5: PME# disabled pci 0000:00:14.0: reg 10 io port: [0x8410-0x841f] pci 0000:00:14.1: reg 10 io port: [0x1f0-0x1f7] pci 0000:00:14.1: reg 14 io port: [0x3f4-0x3f7] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] pci 0000:00:14.1: reg 20 io port: [0x8420-0x842f] pci 0000:00:14.2: reg 10 64bit mmio: [0xf8700000-0xf8703fff] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled pci 0000:01:05.0: reg 10 64bit mmio pref: [0xf0000000-0xf7ffffff] pci 0000:01:05.0: reg 18 64bit mmio: [0xf8100000-0xf810ffff] pci 0000:01:05.0: reg 20 io port: [0x9000-0x90ff] pci 0000:01:05.0: reg 24 32bit mmio: [0xf8000000-0xf80fffff] pci 0000:01:05.0: supports D1 D2 pci 0000:00:01.0: bridge io port: [0x9000-0x9fff] pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xf81fffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xf0000000-0xf7ffffff] pci 0000:00:04.0: bridge io port: [0x00-0xfff] pci 0000:00:04.0: bridge 32bit mmio: [0x000000-0x0fffff] pci 0000:08:00.0: reg 10 io port: [0xa000-0xa0ff] pci 0000:08:00.0: reg 18 64bit mmio: [0xf8300000-0xf8300fff] pci 0000:08:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:08:00.0: supports D1 D2 pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold pci 0000:08:00.0: PME# disabled pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:05.0: bridge io port: [0xa000-0xafff] pci 0000:00:05.0: bridge 32bit mmio: [0xf8300000-0xf83fffff] pci 0000:0e:00.0: reg 10 64bit mmio: [0xf8200000-0xf820ffff] pci 0000:0e:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:06.0: bridge 32bit mmio: [0xf8200000-0xf82fffff] pci 0000:14:06.0: reg 10 32bit mmio: [0xf8400000-0xf84007ff] pci 0000:14:06.0: supports D1 D2 pci 0000:14:06.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:14:06.0: PME# disabled pci 0000:14:06.1: reg 10 32bit mmio: [0xf8400800-0xf84008ff] pci 0000:14:06.1: supports D1 D2 pci 0000:14:06.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:14:06.1: PME# disabled pci 0000:14:06.2: reg 10 32bit mmio: [0xf8400c00-0xf8400cff] pci 0000:14:06.2: supports D1 D2 pci 0000:14:06.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:14:06.2: PME# disabled pci 0000:14:06.3: reg 10 32bit mmio: [0xf8401000-0xf84010ff] pci 0000:14:06.3: supports D1 D2 pci 0000:14:06.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:14:06.3: PME# disabled pci 0000:14:06.4: reg 10 32bit mmio: [0xf8401400-0xf84014ff] pci 0000:14:06.4: supports D1 D2 pci 0000:14:06.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:14:06.4: PME# disabled pci 0000:00:14.4: transparent bridge pci 0000:00:14.4: bridge 32bit mmio: [0xf8400000-0xf84fffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB4_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB5_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing pci 0000:00:04.0: BAR 13: can't allocate resource pci 0000:00:04.0: BAR 14: can't allocate resource NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default DMA-API: preallocated 32768 debug entries DMA-API: debugging enabled by kernel config hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 32-bit 14.318180 MHz counter Switching to clocksource hpet kstop/0 used greatest stack depth: 6064 bytes left Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved system 00:08: ioport range 0x1080-0x1080 has been reserved system 00:08: ioport range 0x220-0x22f has been reserved system 00:08: ioport range 0x40b-0x40b has been reserved system 00:08: ioport range 0x4d0-0x4d1 has been reserved system 00:08: ioport range 0x4d6-0x4d6 has been reserved system 00:08: ioport range 0x530-0x537 has been reserved system 00:08: ioport range 0xc00-0xc01 has been reserved system 00:08: ioport range 0xc14-0xc14 has been reserved system 00:08: ioport range 0xc50-0xc52 has been reserved system 00:08: ioport range 0xc6c-0xc6c has been reserved system 00:08: ioport range 0xc6f-0xc6f has been reserved system 00:08: ioport range 0xcd0-0xcd1 has been reserved system 00:08: ioport range 0xcd2-0xcd3 has been reserved system 00:08: ioport range 0xcd4-0xcd5 has been reserved system 00:08: ioport range 0xcd6-0xcd7 has been reserved system 00:08: ioport range 0xcd8-0xcdf has been reserved system 00:08: ioport range 0xfe00-0xfe00 has been reserved system 00:08: ioport range 0x8000-0x805f has been reserved system 00:08: ioport range 0xf40-0xf47 has been reserved system 00:08: ioport range 0x87f-0x87f has been reserved system 00:09: iomem range 0xe0000-0xfffff could not be reserved system 00:09: iomem range 0xff800000-0xff80ffff has been reserved system 00:09: iomem range 0xfff00000-0xffffffff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x9000-0x9fff pci 0000:00:01.0: MEM window: 0xf8000000-0xf81fffff pci 0000:00:01.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 pci 0000:00:04.0: IO window: 0x2000-0x2fff pci 0000:00:04.0: MEM window: 0x80000000-0x801fffff pci 0000:00:04.0: PREFETCH window: 0x00000080200000-0x000000803fffff pci 0000:00:05.0: PCI bridge, secondary bus 0000:08 pci 0000:00:05.0: IO window: 0xa000-0xafff pci 0000:00:05.0: MEM window: 0xf8300000-0xf83fffff pci 0000:00:05.0: PREFETCH window: 0x80400000-0x804fffff pci 0000:00:06.0: PCI bridge, secondary bus 0000:0e pci 0000:00:06.0: IO window: 0x3000-0x3fff pci 0000:00:06.0: MEM window: 0xf8200000-0xf82fffff pci 0000:00:06.0: PREFETCH window: 0x00000080500000-0x000000806fffff pci 0000:00:14.4: PCI bridge, secondary bus 0000:14 pci 0000:00:14.4: IO window: disabled pci 0000:00:14.4: MEM window: 0xf8400000-0xf84fffff pci 0000:00:14.4: PREFETCH window: disabled pci 0000:00:04.0: enabling device (0000 -> 0003) pci 0000:00:04.0: setting latency timer to 64 pci 0000:00:05.0: setting latency timer to 64 pci 0000:00:06.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xf81fffff] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf7ffffff] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] pci_bus 0000:02: resource 1 mem: [0x80000000-0x801fffff] pci_bus 0000:02: resource 2 pref mem [0x80200000-0x803fffff] pci_bus 0000:08: resource 0 io: [0xa000-0xafff] pci_bus 0000:08: resource 1 mem: [0xf8300000-0xf83fffff] pci_bus 0000:08: resource 2 pref mem [0x80400000-0x804fffff] pci_bus 0000:0e: resource 0 io: [0x3000-0x3fff] pci_bus 0000:0e: resource 1 mem: [0xf8200000-0xf82fffff] pci_bus 0000:0e: resource 2 pref mem [0x80500000-0x806fffff] pci_bus 0000:14: resource 1 mem: [0xf8400000-0xf84fffff] pci_bus 0000:14: resource 3 io: [0x00-0xffff] pci_bus 0000:14: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 10, 4718592 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 4395k freed audit: initializing netlink socket (disabled) type=2000 audit(1253802147.914:1): initialized Warning: could not register the kmem tracer HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 3681 SELinux: Registering netfilter hooks cryptomgr_test used greatest stack depth: 5728 bytes left cryptomgr_test used greatest stack depth: 5664 bytes left alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:05.0: Boot video device alloc irq_desc for 24 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:04.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:04.0: setting latency timer to 64 work_for_cpu used greatest stack depth: 5600 bytes left alloc irq_desc for 25 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:05.0: irq 25 for MSI/MSI-X pcieport-driver 0000:00:05.0: setting latency timer to 64 alloc irq_desc for 26 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:06.0: irq 26 for MSI/MSI-X pcieport-driver 0000:00:06.0: setting latency timer to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp: Slot [1] registered pci-stub: invalid id string "" ACPI: AC Adapter [ADP0] (on-line) input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 ACPI: Lid Switch [LID] fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [FAN1] (off) ACPI: processor limited to max C-state 1 processor LNXCPU:00: registered as cooling_device1 ACPI: Processor [CPU0] (supports 8 throttling states) processor LNXCPU:01: registered as cooling_device2 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZCR] (75 C) Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input3 ahci 0000:00:12.0: version 3.0 alloc irq_desc for 22 on node 0 alloc kstat_irqs on node 0 ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:12.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ACPI: Battery Slot [BAT0] (battery present) ata1: SATA max UDMA/133 abar m1024@0xf8709000 port 0xf8709100 irq 22 ata2: SATA max UDMA/133 abar m1024@0xf8709000 port 0xf8709180 irq 22 ata3: SATA max UDMA/133 abar m1024@0xf8709000 port 0xf8709200 irq 22 ata4: SATA max UDMA/133 abar m1024@0xf8709000 port 0xf8709280 irq 22 work_for_cpu used greatest stack depth: 4608 bytes left Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:13.5: power state changed by ACPI to D0 alloc irq_desc for 19 on node 0 alloc kstat_irqs on node 0 ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 19, io mem 0xf8709400 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.31 ehci_hcd usb usb1: SerialNumber: 0000:00:13.5 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected work_for_cpu used greatest stack depth: 3920 bytes left ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver alloc irq_desc for 16 on node 0 alloc kstat_irqs on node 0 ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 16, io mem 0xf8704000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.31 ohci_hcd usb usb2: SerialNumber: 0000:00:13.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected alloc irq_desc for 17 on node 0 alloc kstat_irqs on node 0 ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 17, io mem 0xf8705000 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.31 ohci_hcd usb usb3: SerialNumber: 0000:00:13.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected alloc irq_desc for 18 on node 0 alloc kstat_irqs on node 0 ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.2: irq 18, io mem 0xf8706000 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 2.6.31 ohci_hcd usb usb4: SerialNumber: 0000:00:13.2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.3: irq 17, io mem 0xf8707000 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: OHCI Host Controller usb usb5: Manufacturer: Linux 2.6.31 ohci_hcd usb usb5: SerialNumber: 0000:00:13.3 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected work_for_cpu used greatest stack depth: 3888 bytes left ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.4: irq 18, io mem 0xf8708000 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: OHCI Host Controller usb usb6: Manufacturer: Linux 2.6.31 ohci_hcd usb usb6: SerialNumber: 0000:00:13.4 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd: USB Universal Host Controller Interface driver PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice Driver 'rtc_cmos' needs updating - please use bus_type methods rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 114 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 9:130:385 usb usb3: hash matches thermal cooling_device0: hash matches rtc_cmos 00:04: setting system clock to 2009-09-24 14:22:29 UTC (1253802149) Initalizing network drop monitor service input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata1: softreset failed (device not ready) ata1: applying SB600 PMP SRST workaround and retrying ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: ST9120822AS, 3.ALE, max UDMA/133 ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST9120822AS 3.AL PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk Freeing unused kernel memory: 3404k freed Write protecting the kernel read-only data: 7484k Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04713/0x204000 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. radeon 0000:01:05.0: power state changed by ACPI to D0 radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [drm] radeon: Initializing kernel modesetting. [drm] register mmio base: 0xF8100000 [drm] register mmio size: 65536 ATOM BIOS: ATI [drm] GPU reset succeed (RBBM_STATUS=0x10000140) [drm] Clocks initialized ! [drm] radeon: 1 quad pipes, 1 z pipes initialized. [drm] radeon: VRAM 128M [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF [drm] radeon: GTT 512M [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF [drm] radeon: irq initialized. [drm] Detected VRAM RAM=128M, BAR=128M [drm] RAM width 64bits DDR [TTM] Zone kernel: Available graphics memory: 944232 kiB. [drm] radeon: 128M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] radeon: cp idle (0x10000C03) [drm] Loading RS690/RS740 Microcode platform radeon_cp.0: firmware: requesting radeon/RS690_cp.bin [drm] radeon: ring at 0x0000000020000000 [drm] ring test succeeded in 0 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] radeon: kernel modesetting successfully initialized. [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA [drm] DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] Connector 1: [drm] LVDS [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [drm] Encoders: [drm] LCD1: INTERNAL_LVTM1 [drm] Connector 2: [drm] S-video [drm] Encoders: [drm] TV1: INTERNAL_KLDSCP_DAC1 [drm] fb mappable at 0xF0040000 [drm] vram apper at 0xF0000000 [drm] size 4096000 [drm] fb depth is 24 [drm] pitch is 5120 executing set pll executing set crtc timing [drm] LVDS-10: set mode 1280x800 17 async/4 used greatest stack depth: 3536 bytes left Console: switching to colour frame buffer device 160x50 fb0: radeondrmfb frame buffer device registered panic notifier [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0 work_for_cpu used greatest stack depth: 2976 bytes left EXT4-fs (dm-10): barriers enabled kjournald2 starting: pid 123, dev dm-10:8, commit interval 5 seconds EXT4-fs (dm-10): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (dm-10): mounted filesystem with ordered data mode type=1404 audit(1253802197.182:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 SELinux: 8192 avtab hash slots, 138487 rules. SELinux: 8192 avtab hash slots, 138487 rules. SELinux: 8 users, 12 roles, 2875 types, 129 bools, 1 sens, 1024 cats SELinux: 75 classes, 138487 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-10, type ext4), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1253802198.353:3): policy loaded auid=4294967295 ses=4294967295 readahead[153]: segfault at 0 ip 0000003b16a81272 sp 00007fffe505ec88 error 4 in libc-2.10.90.so[3b16a00000+176000] udev: starting version 145 pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pata_atiixp 0000:00:14.1: setting latency timer to 64 scsi4 : pata_atiixp scsi5 : pata_atiixp ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15 ricoh-mmc: Ricoh MMC Controller disabling driver ricoh-mmc: Copyright(c) Philip Langdale ricoh-mmc: Ricoh MMC controller found at 0000:14:06.2 [1180:0843] (rev 12) ricoh-mmc: Controller is now disabled. ata5.00: ATAPI: TSSTcorp CDDVDW TS-L632H, TO01, max UDMA/33 ata5.00: configured for UDMA/33 scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632H TO01 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 sr 4:0:0:0: Attached scsi generic sg1 type 5 k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 EDAC MC: Ver: 2.1.0 Sep 24 2009 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 r8169 0000:08:00.0: setting latency timer to 64 alloc irq_desc for 27 on node 0 alloc kstat_irqs on node 0 r8169 0000:08:00.0: irq 27 for MSI/MSI-X acpi device:20: registered as cooling_device3 eth0: RTL8101e at 0xffffc900054e8000, 00:a0:d1:85:85:cd, XID 94200000 IRQ 27 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1d/device:1e/input/input6 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) EDAC amd64_edac: Ver: 3.2.0 Sep 24 2009 EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). EDAC amd64: WARNING: ECC is disabled by BIOS. Module will NOT be loaded. Either Enable ECC in the BIOS, or set 'ecc_enable_override'. Also, use of the override can cause unknown side effects. amd64_edac: probe of 0000:00:18.2 failed with error -22 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pci 0000:14:06.1: SDHCI controller found [1180:0822] (rev 22) alloc irq_desc for 21 on node 0 alloc kstat_irqs on node 0 sdhci-pci 0000:14:06.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 sdhci-pci 0000:14:06.1: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:14:06.1: setting latency timer to 64 Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:14:06.1] using DMA alloc irq_desc for 20 on node 0 alloc kstat_irqs on node 0 firewire_ohci 0000:14:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 firewire_ohci: Added fw-ohci device 0000:14:06.0, OHCI version 1.10 cfg80211: Calling CRDA to update world regulatory domain firewire_core: created device fw0: GUID 00080da0d18585cd, S400 cfg80211: World regulatory domain updated: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ALSA sound/pci/hda/hda_codec.c:3881: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3885: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3889: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3890: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3901: inputs: mic=0x18, fmic=0x0, line=0x0, fline=0x0, cd=0x0, aux=0x0 ALSA sound/pci/hda/patch_realtek.c:1282: realtek: No valid SSID, checking pincfg 0x4015812d for NID 0x1d ALSA sound/pci/hda/patch_realtek.c:1298: realtek: Enabling init ASM_ID=0x812d CODEC_ID=10ec0268 input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input7 ath5k 0000:0e:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ath5k 0000:0e:00.0: setting latency timer to 64 ath5k 0000:0e:00.0: registered as 'phy0' ath: EEPROM regdomain: 0x36 ath: EEPROM indicates we should expect a direct regpair map ath: Country alpha2 being used: HR ath: Regpair used: 0x36 phy0: Selected rate control algorithm 'minstrel' ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) cfg80211: Calling CRDA for country: HR cfg80211: Regulatory domain changed to country: HR (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm) (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm) cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2301 mBm) (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 3000 mBm) kvm: Nested Virtualization enabled device-mapper: multipath: version 1.1.0 loaded EXT4-fs (dm-10): internal journal on dm-10:8 kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs EXT4-fs (dm-11): barriers enabled kjournald2 starting: pid 674, dev dm-11:8, commit interval 5 seconds EXT4-fs (dm-11): internal journal on dm-11:8 EXT4-fs (dm-11): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (dm-11): mounted filesystem with ordered data mode SELinux: initialized (dev dm-11, type ext4), uses xattr EXT4-fs (dm-5): barriers enabled kjournald2 starting: pid 675, dev dm-5:8, commit interval 5 seconds EXT4-fs (dm-5): warning: maximal mount count reached, running e2fsck is recommended EXT4-fs (dm-5): internal journal on dm-5:8 EXT4-fs (dm-5): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (dm-5): mounted filesystem with ordered data mode SELinux: initialized (dev dm-5, type ext4), uses xattr Adding 2097144k swap on /dev/dm-12. Priority:-1 extents:1 across:2097144k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.20.00) cpufreq-core: trying to register driver powernow-k8 cpufreq-core: adding CPU 0 powernow-k8: 0 : fid 0xc, vid 0x12 powernow-k8: 1 : fid 0xa, vid 0x13 powernow-k8: 2 : fid 0x8, vid 0x14 powernow-k8: 3 : fid 0x0, vid 0x1e powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x12 powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x13 powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x14 powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e powernow-k8: cpu0, init lo 0x120c, hi 0x1 powernow-k8: policy current frequency 2000000 kHz freq-table: table entry 0: 2000000 kHz, 4620 index freq-table: table entry 1: 1800000 kHz, 4874 index freq-table: table entry 2: 1600000 kHz, 5128 index freq-table: table entry 3: 800000 kHz, 7680 index freq-table: setting show_table for cpu 0 to ffff880065e963b8 powernow-k8: cpu_init done, current fid 0xc, vid 0x12 cpufreq-core: CPU 1 already managed, adding link cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0 freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0 freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0 freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0 cpufreq-core: new min and max freqs are 800000 - 2000000 kHz cpufreq-core: governor switch cpufreq-core: __cpufreq_governor for CPU 0, event 1 cpufreq-core: governor: change or update limits cpufreq-core: __cpufreq_governor for CPU 0, event 3 cpufreq-core: target for CPU 0: 2000000 kHz, relation 0 powernow-k8: targ: cpu 0, 2000000 kHz, min 800000, max 2000000, relation 0 powernow-k8: targ: curr fid 0xc, vid 0x12 freq-table: request for target 2000000 kHz (relation: 0) for cpu 0 freq-table: target is 0 (2000000 kHz, 4620) powernow-k8: cpu 0 transition to index 0 powernow-k8: table matched fid 0xc, giving vid 0x12 powernow-k8: target matches current values (fid 0xc, vid 0x12) cpufreq-core: initialization complete cpufreq-core: adding CPU 1 cpufreq-core: driver powernow-k8 up and running cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0 freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0 freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0 freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0 cpufreq-core: new min and max freqs are 800000 - 2000000 kHz cpufreq-core: governor switch cpufreq-core: __cpufreq_governor for CPU 0, event 2 cpufreq-core: __cpufreq_governor for CPU 0, event 1 cpufreq-core: governor: change or update limits cpufreq-core: __cpufreq_governor for CPU 0, event 3 cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0 freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0 freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0 freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0 cpufreq-core: new min and max freqs are 800000 - 2000000 kHz cpufreq-core: governor: change or update limits cpufreq-core: __cpufreq_governor for CPU 0, event 3 cpufreq-core: target for CPU 0: 1000000 kHz, relation 0 powernow-k8: targ: cpu 0, 1000000 kHz, min 800000, max 2000000, relation 0 powernow-k8: targ: curr fid 0xc, vid 0x12 freq-table: request for target 1000000 kHz (relation: 0) for cpu 0 freq-table: target is 2 (1600000 kHz, 5128) powernow-k8: cpu 0 transition to index 2 powernow-k8: table matched fid 0x8, giving vid 0x14 powernow-k8: cpu 0, changing to fid 0x8, vid 0x14 cpufreq-core: notification 0 of frequency transition to 1600000 kHz cpufreq-core: notification 0 of frequency transition to 1600000 kHz Clocksource tsc unstable (delta = -266309162 ns) NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team __ratelimit: 205 callbacks suppressed cpufreq-core: target for CPU 0: 2000000 kHz, relation 1 powernow-k8: targ: cpu 0, 2000000 kHz, min 800000, max 2000000, relation 1 powernow-k8: targ: curr fid 0x0, vid 0x1e freq-table: request for target 2000000 kHz (relation: 1) for cpu 0 freq-table: target is 0 (2000000 kHz, 4620) powernow-k8: cpu 0 transition to index 0 powernow-k8: table matched fid 0xc, giving vid 0x12 powernow-k8: cpu 0, changing to fid 0xc, vid 0x12 cpufreq-core: notification 0 of frequency transition to 2000000 kHz cpufreq-core: notification 0 of frequency transition to 2000000 kHz r8169: eth0: link up r8169: eth0: link up ADDRCONF(NETDEV_UP): wlan0: link is not ready __ratelimit: 565 callbacks suppressed cpufreq-core: target for CPU 0: 2000000 kHz, relation 1 powernow-k8: targ: cpu 0, 2000000 kHz, min 800000, max 2000000, relation 1 powernow-k8: targ: curr fid 0x0, vid 0x1e freq-table: request for target 2000000 kHz (relation: 1) for cpu 0 freq-table: target is 0 (2000000 kHz, 4620) powernow-k8: cpu 0 transition to index 0 powernow-k8: table matched fid 0xc, giving vid 0x12 powernow-k8: cpu 0, changing to fid 0xc, vid 0x12 cpufreq-core: notification 0 of frequency transition to 2000000 kHz cpufreq-core: notification 0 of frequency transition to 2000000 kHz __ratelimit: 441 callbacks suppressed cpufreq-core: target for CPU 0: 2000000 kHz, relation 1 powernow-k8: targ: cpu 0, 2000000 kHz, min 800000, max 2000000, relation 1 powernow-k8: targ: curr fid 0x0, vid 0x1e freq-table: request for target 2000000 kHz (relation: 1) for cpu 0 freq-table: target is 0 (2000000 kHz, 4620) powernow-k8: cpu 0 transition to index 0 powernow-k8: table matched fid 0xc, giving vid 0x12 powernow-k8: cpu 0, changing to fid 0xc, vid 0x12 cpufreq-core: notification 0 of frequency transition to 2000000 kHz cpufreq-core: notification 0 of frequency transition to 2000000 kHz Bridge firewalling registered virbr0: starting userspace STP failed, starting kernel STP __ratelimit: 437 callbacks suppressed cpufreq-core: target for CPU 0: 2000000 kHz, relation 1 powernow-k8: targ: cpu 0, 2000000 kHz, min 800000, max 2000000, relation 1 powernow-k8: targ: curr fid 0x0, vid 0x1e freq-table: request for target 2000000 kHz (relation: 1) for cpu 0 freq-table: target is 0 (2000000 kHz, 4620) powernow-k8: cpu 0 transition to index 0 powernow-k8: table matched fid 0xc, giving vid 0x12 powernow-k8: cpu 0, changing to fid 0xc, vid 0x12 cpufreq-core: notification 0 of frequency transition to 2000000 kHz cpufreq-core: notification 0 of frequency transition to 2000000 kHz SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs lo: Disabled Privacy Extensions SELinux: initialized (dev proc, type proc), uses genfs_contexts __ratelimit: 414 callbacks suppressed cpufreq-core: target for CPU 0: 2000000 kHz, relation 1 powernow-k8: targ: cpu 0, 2000000 kHz, min 800000, max 2000000, relation 1 powernow-k8: targ: curr fid 0x0, vid 0x1e freq-table: request for target 2000000 kHz (relation: 1) for cpu 0 freq-table: target is 0 (2000000 kHz, 4620) powernow-k8: cpu 0 transition to index 0 powernow-k8: table matched fid 0xc, giving vid 0x12 powernow-k8: cpu 0, changing to fid 0xc, vid 0x12 cpufreq-core: notification 0 of frequency transition to 2000000 kHz cpufreq-core: notification 0 of frequency transition to 2000000 kHz __ratelimit: 394 callbacks suppressed cpufreq-core: target for CPU 0: 891304 kHz, relation 0 powernow-k8: targ: cpu 0, 891304 kHz, min 800000, max 2000000, relation 0 powernow-k8: targ: curr fid 0xc, vid 0x12 freq-table: request for target 891304 kHz (relation: 0) for cpu 0 freq-table: target is 2 (1600000 kHz, 5128) powernow-k8: cpu 0 transition to index 2 powernow-k8: table matched fid 0x8, giving vid 0x14 powernow-k8: cpu 0, changing to fid 0x8, vid 0x14 cpufreq-core: notification 0 of frequency transition to 1600000 kHz cpufreq-core: notification 0 of frequency transition to 1600000 kHz __ratelimit: 455 callbacks suppressed cpufreq-core: target for CPU 0: 2000000 kHz, relation 1 powernow-k8: targ: cpu 0, 2000000 kHz, min 800000, max 2000000, relation 1 powernow-k8: targ: curr fid 0x0, vid 0x1e freq-table: request for target 2000000 kHz (relation: 1) for cpu 0 freq-table: target is 0 (2000000 kHz, 4620) powernow-k8: cpu 0 transition to index 0 powernow-k8: table matched fid 0xc, giving vid 0x12 powernow-k8: cpu 0, changing to fid 0xc, vid 0x12 cpufreq-core: notification 0 of frequency transition to 2000000 kHz cpufreq-core: notification 0 of frequency transition to 2000000 kHz __ratelimit: 303 callbacks suppressed cpufreq-core: target for CPU 0: 2000000 kHz, relation 1 powernow-k8: targ: cpu 0, 2000000 kHz, min 800000, max 2000000, relation 1 powernow-k8: targ: curr fid 0x0, vid 0x1e freq-table: request for target 2000000 kHz (relation: 1) for cpu 0 freq-table: target is 0 (2000000 kHz, 4620) powernow-k8: cpu 0 transition to index 0 powernow-k8: table matched fid 0xc, giving vid 0x12 powernow-k8: cpu 0, changing to fid 0xc, vid 0x12 cpufreq-core: notification 0 of frequency transition to 2000000 kHz cpufreq-core: notification 0 of frequency transition to 2000000 kHz fuse init (API version 7.13) SELinux: initialized (dev fuse, type fuse), uses genfs_contexts __ratelimit: 465 callbacks suppressed cpufreq-core: target for CPU 0: 2000000 kHz, relation 1 powernow-k8: targ: cpu 0, 2000000 kHz, min 800000, max 2000000, relation 1 powernow-k8: targ: curr fid 0x0, vid 0x1e freq-table: request for target 2000000 kHz (relation: 1) for cpu 0 freq-table: target is 0 (2000000 kHz, 4620) powernow-k8: cpu 0 transition to index 0 powernow-k8: table matched fid 0xc, giving vid 0x12 powernow-k8: cpu 0, changing to fid 0xc, vid 0x12 cpufreq-core: notification 0 of frequency transition to 2000000 kHz cpufreq-core: notification 0 of frequency transition to 2000000 kHz __ratelimit: 400 callbacks suppressed cpufreq-core: target for CPU 0: 2000000 kHz, relation 1 powernow-k8: targ: cpu 0, 2000000 kHz, min 800000, max 2000000, relation 1 powernow-k8: targ: curr fid 0x0, vid 0x1e freq-table: request for target 2000000 kHz (relation: 1) for cpu 0 freq-table: target is 0 (2000000 kHz, 4620) powernow-k8: cpu 0 transition to index 0 powernow-k8: table matched fid 0xc, giving vid 0x12 powernow-k8: cpu 0, changing to fid 0xc, vid 0x12 cpufreq-core: notification 0 of frequency transition to 2000000 kHz cpufreq-core: notification 0 of frequency transition to 2000000 kHz __ratelimit: 620 callbacks suppressed cpufreq-core: target for CPU 0: 2000000 kHz, relation 1 powernow-k8: targ: cpu 0, 2000000 kHz, min 800000, max 2000000, relation 1 powernow-k8: targ: curr fid 0x0, vid 0x1e freq-table: request for target 2000000 kHz (relation: 1) for cpu 0 freq-table: target is 0 (2000000 kHz, 4620) powernow-k8: cpu 0 transition to index 0 powernow-k8: table matched fid 0xc, giving vid 0x12 powernow-k8: cpu 0, changing to fid 0xc, vid 0x12 cpufreq-core: notification 0 of frequency transition to 2000000 kHz cpufreq-core: notification 0 of frequency transition to 2000000 kHz __ratelimit: 666 callbacks suppressed cpufreq-core: target for CPU 0: 2000000 kHz, relation 1 powernow-k8: targ: cpu 0, 2000000 kHz, min 800000, max 2000000, relation 1 powernow-k8: targ: curr fid 0x0, vid 0x1e freq-table: request for target 2000000 kHz (relation: 1) for cpu 0 freq-table: target is 0 (2000000 kHz, 4620) powernow-k8: cpu 0 transition to index 0 powernow-k8: table matched fid 0xc, giving vid 0x12 powernow-k8: cpu 0, changing to fid 0xc, vid 0x12 cpufreq-core: notification 0 of frequency transition to 2000000 kHz cpufreq-core: notification 0 of frequency transition to 2000000 kHz __ratelimit: 468 callbacks suppressed cpufreq-core: target for CPU 0: 2000000 kHz, relation 1 powernow-k8: targ: cpu 0, 2000000 kHz, min 800000, max 2000000, relation 1 powernow-k8: targ: curr fid 0x0, vid 0x1e freq-table: request for target 2000000 kHz (relation: 1) for cpu 0 freq-table: target is 0 (2000000 kHz, 4620) powernow-k8: cpu 0 transition to index 0 powernow-k8: table matched fid 0xc, giving vid 0x12 powernow-k8: cpu 0, changing to fid 0xc, vid 0x12 cpufreq-core: notification 0 of frequency transition to 2000000 kHz cpufreq-core: notification 0 of frequency transition to 2000000 kHz __ratelimit: 176 callbacks suppressed cpufreq-core: target for CPU 0: 2000000 kHz, relation 1 powernow-k8: targ: cpu 0, 2000000 kHz, min 800000, max 2000000, relation 1 powernow-k8: targ: curr fid 0x0, vid 0x1e freq-table: request for target 2000000 kHz (relation: 1) for cpu 0 freq-table: target is 0 (2000000 kHz, 4620) powernow-k8: cpu 0 transition to index 0 powernow-k8: table matched fid 0xc, giving vid 0x12 powernow-k8: cpu 0, changing to fid 0xc, vid 0x12 cpufreq-core: notification 0 of frequency transition to 2000000 kHz cpufreq-core: notification 0 of frequency transition to 2000000 kHz __ratelimit: 233 callbacks suppressed cpufreq-core: target for CPU 0: 717391 kHz, relation 0 powernow-k8: targ: cpu 0, 717391 kHz, min 800000, max 2000000, relation 0 powernow-k8: targ: curr fid 0xc, vid 0x12 freq-table: request for target 717391 kHz (relation: 0) for cpu 0 freq-table: target is 3 (800000 kHz, 7680) powernow-k8: cpu 0 transition to index 3 powernow-k8: table matched fid 0x0, giving vid 0x1e powernow-k8: cpu 0, changing to fid 0x0, vid 0x1e cpufreq-core: notification 0 of frequency transition to 800000 kHz cpufreq-core: notification 0 of frequency transition to 800000 kHz __ratelimit: 13 callbacks suppressed cpufreq-core: target for CPU 0: 2000000 kHz, relation 1 powernow-k8: targ: cpu 0, 2000000 kHz, min 800000, max 2000000, relation 1 powernow-k8: targ: curr fid 0x0, vid 0x1e freq-table: request for target 2000000 kHz (relation: 1) for cpu 0 freq-table: target is 0 (2000000 kHz, 4620) powernow-k8: cpu 0 transition to index 0 powernow-k8: table matched fid 0xc, giving vid 0x12 powernow-k8: cpu 0, changing to fid 0xc, vid 0x12 cpufreq-core: notification 0 of frequency transition to 2000000 kHz cpufreq-core: notification 0 of frequency transition to 2000000 kHz cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0 freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0 freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0 freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0 cpufreq-core: new min and max freqs are 800000 - 2000000 kHz cpufreq-core: governor switch cpufreq-core: __cpufreq_governor for CPU 0, event 2 cpufreq-core: __cpufreq_governor for CPU 0, event 1 cpufreq-core: target for CPU 0: 2000000 kHz, relation 1 powernow-k8: targ: cpu 0, 2000000 kHz, min 800000, max 2000000, relation 1 powernow-k8: targ: curr fid 0x0, vid 0x1e freq-table: request for target 2000000 kHz (relation: 1) for cpu 0 freq-table: target is 0 (2000000 kHz, 4620) powernow-k8: cpu 0 transition to index 0 powernow-k8: table matched fid 0xc, giving vid 0x12 powernow-k8: cpu 0, changing to fid 0xc, vid 0x12 cpufreq-core: notification 0 of frequency transition to 2000000 kHz cpufreq-core: notification 0 of frequency transition to 2000000 kHz powernow-k8: ph1 (cpu0): start, currfid 0x0, currvid 0x1e, reqvid 0x12, rvo 0x2 powernow-k8: ph1 maxvid=0x10 powernow-k8: ph1: curr 0x1e, req vid 0x12 powernow-k8: writing vid 0x1d, lo 0x11d00, hi 0x1 powernow-k8: ph1: curr 0x1d, req vid 0x12 powernow-k8: writing vid 0x1c, lo 0x11c00, hi 0x1 powernow-k8: ph1: curr 0x1c, req vid 0x12 powernow-k8: writing vid 0x1b, lo 0x11b00, hi 0x1 powernow-k8: ph1: curr 0x1b, req vid 0x12 powernow-k8: writing vid 0x1a, lo 0x11a00, hi 0x1 powernow-k8: ph1: curr 0x1a, req vid 0x12 powernow-k8: writing vid 0x19, lo 0x11900, hi 0x1 powernow-k8: ph1: curr 0x19, req vid 0x12 powernow-k8: writing vid 0x18, lo 0x11800, hi 0x1 powernow-k8: ph1: curr 0x18, req vid 0x12 powernow-k8: writing vid 0x17, lo 0x11700, hi 0x1 powernow-k8: ph1: curr 0x17, req vid 0x12 powernow-k8: writing vid 0x16, lo 0x11600, hi 0x1 powernow-k8: ph1: curr 0x16, req vid 0x12 powernow-k8: writing vid 0x15, lo 0x11500, hi 0x1 powernow-k8: ph1: curr 0x15, req vid 0x12 powernow-k8: writing vid 0x14, lo 0x11400, hi 0x1 powernow-k8: ph1: curr 0x14, req vid 0x12 powernow-k8: writing vid 0x13, lo 0x11300, hi 0x1 powernow-k8: ph1: curr 0x13, req vid 0x12 powernow-k8: writing vid 0x12, lo 0x11200, hi 0x1 powernow-k8: ph1: changing vid for rvo, req 0x11 powernow-k8: writing vid 0x11, lo 0x11100, hi 0x1 powernow-k8: ph1: changing vid for rvo, req 0x10 powernow-k8: writing vid 0x10, lo 0x11000, hi 0x1 powernow-k8: ph1 complete, currfid 0x0, currvid 0x10 powernow-k8: ph2 (cpu0): starting, currfid 0x0, currvid 0x10, reqfid 0xc powernow-k8: writing fid 0xa, lo 0x1100a, hi 0x258 powernow-k8: writing fid 0xc, lo 0x1100c, hi 0x258 powernow-k8: ph2 complete, currfid 0xc, currvid 0x10 powernow-k8: ph3 (cpu0): starting, currfid 0xc, currvid 0x10 powernow-k8: writing vid 0x12, lo 0x1120c, hi 0x1 powernow-k8: ph3 complete, currfid 0xc, currvid 0x12 powernow-k8: transitioned (cpu0): new fid 0xc, vid 0x12 cpufreq-core: notification 1 of frequency transition to 2000000 kHz cpufreq-core: notification 1 of frequency transition to 2000000 kHz cpufreq-core: governor: change or update limits cpufreq-core: __cpufreq_governor for CPU 0, event 3 cpufreq-core: target for CPU 0: 2000000 kHz, relation 1 powernow-k8: targ: cpu 0, 2000000 kHz, min 800000, max 2000000, relation 1 powernow-k8: targ: curr fid 0xc, vid 0x12 freq-table: request for target 2000000 kHz (relation: 1) for cpu 0 freq-table: target is 0 (2000000 kHz, 4620) powernow-k8: cpu 0 transition to index 0 powernow-k8: table matched fid 0xc, giving vid 0x12 powernow-k8: target matches current values (fid 0xc, vid 0x12) PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Entering mem sleep Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk ACPI handle has no context! ACPI handle has no context! sdhci-pci 0000:14:06.1: PCI INT B disabled ACPI handle has no context! ACPI handle has no context! ath5k 0000:0e:00.0: PCI INT A disabled radeon 0000:01:05.0: PCI INT A disabled radeon 0000:01:05.0: power state changed by ACPI to D3 HDA Intel 0000:00:14.2: PCI INT A disabled pata_atiixp 0000:00:14.1: PCI INT A disabled ehci_hcd 0000:00:13.5: PCI INT D disabled ohci_hcd 0000:00:13.4: PCI INT C disabled ohci_hcd 0000:00:13.3: PCI INT B disabled ohci_hcd 0000:00:13.2: PCI INT C disabled ohci_hcd 0000:00:13.1: PCI INT B disabled ohci_hcd 0000:00:13.0: PCI INT A disabled ahci 0000:00:12.0: PCI INT A disabled PM: suspend devices took 2.810 seconds ricoh-mmc: Suspending. ricoh-mmc: Controller is now re-enabled. r8169 0000:08:00.0: PME# enabled ehci_hcd 0000:00:13.5: power state changed by ACPI to D3 ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... cpufreq-core: unregistering CPU 1 cpufreq-core: removing link Broke affinity for irq 12 Broke affinity for irq 22 kvm: disabling virtualization on CPU1 CPU 1 is now offline lockdep: fixing up alternatives. SMP alternatives: switching to UP code CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching NULL sched-domain. CPU1 is down __ratelimit: 182 callbacks suppressed cpufreq-core: suspending cpu 0 cpufreq-core: suspending cpu 1 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Back to C! cpufreq-core: resuming cpu 0 cpufreq-core: resuming cpu 1 BUG: sleeping function called from invalid context at kernel/mutex.c:280 in_atomic(): 0, irqs_disabled(): 1, pid: 1782, name: pm-suspend 2 locks held by pm-suspend/1782: #0: (&buffer->mutex){+.+.+.}, at: [] sysfs_write_file+0x4b/0x15a #1: (pm_mutex){+.+.+.}, at: [] enter_state+0x48/0x158 irq event stamp: 79758 hardirqs last enabled at (79757): [] __mutex_unlock_slowpath+0x12f/0x158 hardirqs last disabled at (79758): [] arch_suspend_disable_irqs+0x28/0x3e softirqs last enabled at (79644): [] __do_softirq+0x1c6/0x1f4 softirqs last disabled at (79609): [] call_softirq+0x1c/0x30 Pid: 1782, comm: pm-suspend Not tainted 2.6.31 #15 Call Trace: [] __might_sleep+0x116/0x131 [] mutex_lock_nested+0x38/0x68 [] clocksource_resume+0x2b/0x86 [] timekeeping_resume+0x2d/0x1ea [] __sysdev_resume+0x34/0xf5 [] sysdev_resume+0xec/0x19b [] suspend_devices_and_enter+0x14f/0x1fa [] enter_state+0xee/0x158 [] state_store+0xc5/0xf9 [] kobj_attr_store+0x2a/0x40 [] sysfs_write_file+0x10a/0x15a [] vfs_write+0xbd/0x12e [] sys_write+0x59/0x91 [] system_call_fastpath+0x16/0x1b Enabling non-boot CPUs ... cpufreq-core: handle_update for cpu 0 called cpufreq-core: updating policy for CPU 0 cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0 freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0 freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0 freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0 cpufreq-core: new min and max freqs are 800000 - 2000000 kHz cpufreq-core: governor: change or update limits cpufreq-core: __cpufreq_governor for CPU 0, event 3 cpufreq-core: target for CPU 0: 2000000 kHz, relation 1 powernow-k8: targ: cpu 0, 2000000 kHz, min 800000, max 2000000, relation 1 powernow-k8: targ: curr fid 0xc, vid 0x12 freq-table: request for target 2000000 kHz (relation: 1) for cpu 0 freq-table: target is 0 (2000000 kHz, 4620) powernow-k8: cpu 0 transition to index 0 powernow-k8: table matched fid 0xc, giving vid 0x12 powernow-k8: target matches current values (fid 0xc, vid 0x12) lockdep: fixing up alternatives. SMP alternatives: switching to SMP code Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3990.45 BogoMIPS (lpj=1995226) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 5 MCE banks CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 01 kvm: enabling virtualization on CPU1 Switch to broadcast mode on CPU1 CPU0 attaching NULL sched-domain. Switched to high resolution mode on CPU 1 CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 cpufreq-core: adding CPU 1 powernow-k8: 0 : fid 0xc, vid 0x12 powernow-k8: 1 : fid 0xa, vid 0x13 powernow-k8: 2 : fid 0x8, vid 0x14 powernow-k8: 3 : fid 0x0, vid 0x1e powernow-k8: cpu1, init lo 0x120c, hi 0x1 powernow-k8: policy current frequency 2000000 kHz freq-table: table entry 0: 2000000 kHz, 4620 index freq-table: table entry 1: 1800000 kHz, 4874 index freq-table: table entry 2: 1600000 kHz, 5128 index freq-table: table entry 3: 800000 kHz, 7680 index freq-table: setting show_table for cpu 1 to ffff880072d934c8 powernow-k8: cpu_init done, current fid 0xc, vid 0x12 cpufreq-core: CPU already managed, adding link freq-table: clearing show_table for cpu 1 CPU1 is up x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 ACPI: Waking up from system sleep state S3 cpufreq-core: CPU 0: _PPC is 0 - frequency not limited cpufreq-core: updating policy for CPU 0 cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0 freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0 freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0 freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0 cpufreq-core: new min and max freqs are 800000 - 2000000 kHz cpufreq-core: governor: change or update limits cpufreq-core: __cpufreq_governor for CPU 0, event 3 cpufreq-core: target for CPU 0: 2000000 kHz, relation 1 powernow-k8: targ: cpu 0, 2000000 kHz, min 800000, max 2000000, relation 1 powernow-k8: targ: curr fid 0xc, vid 0x12 freq-table: request for target 2000000 kHz (relation: 1) for cpu 0 freq-table: target is 0 (2000000 kHz, 4620) powernow-k8: cpu 0 transition to index 0 powernow-k8: table matched fid 0xc, giving vid 0x12 powernow-k8: target matches current values (fid 0xc, vid 0x12) cpufreq-core: CPU 1: _PPC is 0 - frequency not limited cpufreq-core: updating policy for CPU 1 cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0 freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0 freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0 freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0 cpufreq-core: new min and max freqs are 800000 - 2000000 kHz cpufreq-core: governor: change or update limits cpufreq-core: __cpufreq_governor for CPU 0, event 3 cpufreq-core: target for CPU 0: 2000000 kHz, relation 1 powernow-k8: targ: cpu 0, 2000000 kHz, min 800000, max 2000000, relation 1 powernow-k8: targ: curr fid 0xc, vid 0x12 freq-table: request for target 2000000 kHz (relation: 1) for cpu 0 freq-table: target is 0 (2000000 kHz, 4620) powernow-k8: cpu 0 transition to index 0 powernow-k8: table matched fid 0xc, giving vid 0x12 powernow-k8: target matches current values (fid 0xc, vid 0x12) pci 0000:00:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000) pci 0000:00:01.0: restoring config space at offset 0x9 (was 0x10001, writing 0xf7f1f001) pcieport-driver 0000:00:04.0: restoring config space at offset 0xf (was 0xff, writing 0x400ff) pcieport-driver 0000:00:04.0: restoring config space at offset 0x9 (was 0x10001, writing 0x80318021) pcieport-driver 0000:00:04.0: restoring config space at offset 0x8 (was 0x0, writing 0x80108000) pcieport-driver 0000:00:04.0: restoring config space at offset 0x7 (was 0x101, writing 0x2121) pcieport-driver 0000:00:04.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008) pcieport-driver 0000:00:04.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) pcieport-driver 0000:00:05.0: restoring config space at offset 0xf (was 0xff, writing 0x400ff) pcieport-driver 0000:00:05.0: restoring config space at offset 0x9 (was 0x10001, writing 0x80418041) pcieport-driver 0000:00:05.0: restoring config space at offset 0x8 (was 0x0, writing 0xf830f830) pcieport-driver 0000:00:05.0: restoring config space at offset 0x7 (was 0x20000101, writing 0xa1a1) pcieport-driver 0000:00:05.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008) pcieport-driver 0000:00:05.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) pcieport-driver 0000:00:06.0: restoring config space at offset 0xf (was 0xff, writing 0x400ff) pcieport-driver 0000:00:06.0: restoring config space at offset 0x9 (was 0x10001, writing 0x80618051) pcieport-driver 0000:00:06.0: restoring config space at offset 0x8 (was 0x0, writing 0xf820f820) pcieport-driver 0000:00:06.0: restoring config space at offset 0x7 (was 0x20000101, writing 0x3131) pcieport-driver 0000:00:06.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008) pcieport-driver 0000:00:06.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) ahci 0000:00:12.0: restoring config space at offset 0x2 (was 0x1018f00, writing 0x1060100) ahci 0000:00:12.0: set SATA to AHCI mode ohci_hcd 0000:00:13.0: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00012) ohci_hcd 0000:00:13.1: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00012) ohci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00012) ohci_hcd 0000:00:13.3: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00012) ohci_hcd 0000:00:13.4: restoring config space at offset 0x1 (was 0x2a00002, writing 0x2a00012) ehci_hcd 0000:00:13.5: restoring config space at offset 0x3 (was 0x4008, writing 0x4010) ehci_hcd 0000:00:13.5: restoring config space at offset 0x1 (was 0x2b00002, writing 0x2b00012) pata_atiixp 0000:00:14.1: restoring config space at offset 0x3 (was 0x0, writing 0x4000) HDA Intel 0000:00:14.2: restoring config space at offset 0xf (was 0x10a, writing 0xa) HDA Intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002) r8169 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105) r8169 0000:08:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xf8300004) r8169 0000:08:00.0: restoring config space at offset 0x4 (was 0x1, writing 0xa001) r8169 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) r8169 0000:08:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) ath5k 0000:0e:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) ath5k 0000:0e:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf8200004) ath5k 0000:0e:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) ath5k 0000:0e:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) firewire_ohci 0000:14:06.0: restoring config space at offset 0xf (was 0x4020100, writing 0x402010b) firewire_ohci 0000:14:06.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804008) sdhci-pci 0000:14:06.1: restoring config space at offset 0xf (was 0x200, writing 0x20b) sdhci-pci 0000:14:06.1: restoring config space at offset 0x4 (was 0x0, writing 0xf8400800) sdhci-pci 0000:14:06.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804008) sdhci-pci 0000:14:06.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) ricoh-mmc 0000:14:06.2: restoring config space at offset 0xf (was 0x200, writing 0x20b) ricoh-mmc 0000:14:06.2: restoring config space at offset 0x4 (was 0x0, writing 0xf8400c00) ricoh-mmc 0000:14:06.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804008) ricoh-mmc 0000:14:06.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) ricoh-mmc: Resuming. ricoh-mmc: Controller is now disabled. pci 0000:14:06.3: restoring config space at offset 0xf (was 0x200, writing 0x20b) pci 0000:14:06.3: restoring config space at offset 0x4 (was 0x0, writing 0xf8401400) pci 0000:14:06.3: restoring config space at offset 0x3 (was 0x800000, writing 0x804008) pci 0000:14:06.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ============================================================================= BUG kmalloc-256: Poison overwritten ----------------------------------------------------------------------------- INFO: 0xffff880073bf1bb0-0xffff880073bf1bb7. First byte 0x12 instead of 0x6b INFO: Allocated in powernowk8_cpu_init+0x72/0xc27 [powernow_k8] age=290 cpu=0 pid=1782 INFO: Freed in powernowk8_cpu_exit+0x6b/0x88 [powernow_k8] age=289 cpu=0 pid=1782 INFO: Slab 0xffffea0002f059e8 objects=12 used=10 fp=0xffff880073bf1b88 flags=0x200000000000c3 INFO: Object 0xffff880073bf1b88 @offset=2952 fp=0xffff880073bf1e18 Bytes b4 0xffff880073bf1b78: ec 77 fe ff 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ìwþÿ....ZZZZZZZZ Object 0xffff880073bf1b88: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xffff880073bf1b98: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xffff880073bf1ba8: 6b 6b 6b 6b 6b 6b 6b 6b 12 00 00 00 0c 00 00 00 kkkkkkkk........ Object 0xffff880073bf1bb8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xffff880073bf1bc8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xffff880073bf1bd8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xffff880073bf1be8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xffff880073bf1bf8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xffff880073bf1c08: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xffff880073bf1c18: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xffff880073bf1c28: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xffff880073bf1c38: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xffff880073bf1c48: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xffff880073bf1c58: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xffff880073bf1c68: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xffff880073bf1c78: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk¥ Redzone 0xffff880073bf1c88: bb bb bb bb bb bb bb bb »»»»»»»» Padding 0xffff880073bf1cc8: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ Pid: 1782, comm: pm-suspend Not tainted 2.6.31 #15 Call Trace: [] print_trailer+0x153/0x174 [] check_bytes_and_report+0xc9/0x10e [] check_object+0xd9/0x1d3 [] __slab_alloc+0x332/0x3f0 [] ? __proc_create+0x9c/0x148 [] __kmalloc+0x130/0x1c4 [] ? xlate_proc_name+0xb9/0xde [] ? __proc_create+0x9c/0x148 [] __proc_create+0x9c/0x148 [] proc_mkdir_mode+0x3d/0x7d [] proc_mkdir+0x29/0x3f [] register_handler_proc+0xf3/0x120 [] __setup_irq+0x273/0x32a [] ? azx_interrupt+0x0/0x159 [snd_hda_intel] [] request_threaded_irq+0x15c/0x202 [] azx_acquire_irq+0x5b/0xc8 [snd_hda_intel] [] azx_resume+0xae/0x14d [snd_hda_intel] [] pci_legacy_resume+0x4b/0x70 [] pci_pm_resume+0x63/0xad [] pm_op+0x7e/0x113 [] dpm_resume_end+0xf1/0x45a [] suspend_devices_and_enter+0x1a6/0x1fa [] enter_state+0xee/0x158 [] state_store+0xc5/0xf9 [] kobj_attr_store+0x2a/0x40 [] sysfs_write_file+0x10a/0x15a [] vfs_write+0xbd/0x12e [] sys_write+0x59/0x91 [] system_call_fastpath+0x16/0x1b FIX kmalloc-256: Restoring 0xffff880073bf1bb0-0xffff880073bf1bb7=0x6b FIX kmalloc-256: Marking all objects used radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [drm] GPU reset succeed (RBBM_STATUS=0x10000140) [drm] Clocks initialized ! [drm] radeon: 1 quad pipes, 1 z pipes initialized. [drm] radeon: VRAM 128M [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF [drm] radeon: GTT 512M [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF [drm] radeon: cp idle (0x10000C03) [drm] radeon: ring at 0x0000000020000000 [drm] ring test succeeded in 0 usecs executing set pll executing set crtc timing [drm] LVDS-10: set mode 1280x800 17 r8169 0000:08:00.0: PME# disabled ath5k 0000:0e:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 sdhci-pci 0000:14:06.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 sdhci-pci 0000:14:06.1: Will use DMA mode even though HW doesn't fully claim to support it. firewire_core: skipped bus generations, destroying all nodes sd 0:0:0:0: [sda] Starting disk ata2: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out ata5.00: configured for UDMA/33 firewire_core: rediscovered device fw0 ata1: softreset failed (device not ready) ata1: applying SB600 PMP SRST workaround and retrying ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 PM: resume devices took 2.170 seconds PM: Finishing wakeup. Restarting tasks ... done. cpufreq-core: setting new policy for CPU 0: 800000 - 2000000 kHz freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0 freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0 freq-table: request for verification of policy (800000 - 2000000 kHz) for cpu 0 freq-table: verification lead to (800000 - 2000000 kHz) for cpu 0 cpufreq-core: new min and max freqs are 800000 - 2000000 kHz cpufreq-core: governor switch cpufreq-core: __cpufreq_governor for CPU 0, event 2 cpufreq-core: __cpufreq_governor for CPU 0, event 1 cpufreq-core: governor: change or update limits cpufreq-core: __cpufreq_governor for CPU 0, event 3 r8169: eth0: link up r8169: eth0: link up ADDRCONF(NETDEV_UP): wlan0: link is not ready __ratelimit: 136 callbacks suppressed cpufreq-core: target for CPU 0: 1304347 kHz, relation 0 powernow-k8: targ: cpu 0, 1304347 kHz, min 800000, max 2000000, relation 0 powernow-k8: targ: curr fid 0xc, vid 0x12 freq-table: request for target 1304347 kHz (relation: 0) for cpu 0 freq-table: target is 2 (1600000 kHz, 5128) powernow-k8: cpu 0 transition to index 2 powernow-k8: table matched fid 0x8, giving vid 0x14 powernow-k8: cpu 0, changing to fid 0x8, vid 0x14 cpufreq-core: notification 0 of frequency transition to 1600000 kHz cpufreq-core: notification 0 of frequency transition to 1600000 kHz __ratelimit: 109 callbacks suppressed