linux-kernel - PCI Express-to-PCI Bridge: yenta

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1254248605.8881.1.camel@wall-e>
Date:	Tue, 29 Sep 2009 20:23:25 +0200
From:	Stefani Seibold <stefani@...bold.net>
To:	linux-kernel <linux-kernel@...r.kernel.org>
Subject: PCI Express-to-PCI Bridge: yenta_cardbus  no bus associated!

Hi PCI Hackers,

i have trouble with an ExpressCard PCI Express-to-PCI Bridge
manufactured by DUEL System under X86/32 Linux kernel 2.6.31.

The kernel will recognized the Texas Instruments XIO2000(A)/XIO2200(A)
PCI Express-to-PCI Bridge and the attached Texas Instruments PCIxx12
Cardbus Controller, but the yenta socket driver will fail with the
message:

yenta_cardbus 0000:0f:00.0: no bus associated! (try 'pci=assign-busses')

The output of dmesg looks like:

pci 0000:0e:00.0: supports D1 D2
pci 0000:0f:00.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:0f:00.0: supports D1 D2
pci 0000:0f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0f:00.0: PME# disabled
pci 0000:0e:00.0: bridge io port: [0x00-0xfff]
pci 0000:0e:00.0: bridge 32bit mmio: [0x000000-0x0fffff]
pci 0000:0e:00.0: bridge 64bit mmio pref: [0x000000-0x0fffff]
pci 0000:0e:00.0: PCI bridge, secondary bus 0000:0f
pci 0000:0e:00.0:   IO window: disabled
pci 0000:0e:00.0:   MEM window: 0xf1c00000-0xf1cfffff
pci 0000:0e:00.0:   PREFETCH window: disabled
decode_hpp: Could not get hotplug parameters. Use defaults
pci 0000:0e:00.0: enabling device (0000 -> 0002)
pci 0000:0e:00.0: setting latency timer to 64
yenta_cardbus 0000:0f:00.0: no bus associated! (try 'pci=assign-busses')

lspci -v shows:

0e:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200(A) PCI Express-to-PCI Bridge (rev 03) (prog-if 00 [Normal decode])
	Physical Slot: 1
	Flags: bus master, fast devsel, latency 0
	Bus: primary=0e, secondary=0f, subordinate=0f, sec-latency=64
	Memory behind bridge: f1c00000-f1cfffff
	Capabilities: [50] Power Management version 2
	Capabilities: [60] MSI: Enable- Count=1/16 Maskable- 64bit+
	Capabilities: [80] Subsystem: Device 5678:1234
	Capabilities: [90] Express PCI/PCI-X Bridge, MSI 00
	Capabilities: [100] Advanced Error Reporting

0f:00.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
	Subsystem: Texas Instruments Device ac48
	Flags: medium devsel, IRQ 255
	Memory at f1c00000 (32-bit, non-prefetchable) [disabled] [size=4K]
	Bus: primary=00, secondary=00, subordinate=00, sec-latency=0
	I/O window 0: 00000000-00000003 [disabled]
	I/O window 1: 00000000-00000003 [disabled]
	16-bit legacy interface ports at 0001


Any idea where the problem is located or how can i fix it?

If you need further information or dumps please contact me.

Stefani


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/