Linux version 2.6.32-rc2-dirty (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #92384 Wed Sep 30 11:54:59 CEST 2009 Command line: root=/dev/sda1 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty debug initcall_debug apic=verbose sysrq_always_enabled 5 ignore_loglevel KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ff30000 (usable) BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data) BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS) BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) bootconsole [earlyser0] enabled ERROR: earlyprintk= earlyser already used debug: ignoring loglevel setting. DMI 2.3 present. last_pfn = 0x3ff30 max_arch_pfn = 0x400000000 e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) Scanning 1 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000001000 (usable) modified: 0000000000001000 - 0000000000006000 (reserved) modified: 0000000000006000 - 000000000009fc00 (usable) modified: 000000000009fc00 - 00000000000a0000 (reserved) modified: 00000000000e4000 - 0000000000100000 (reserved) modified: 0000000000100000 - 000000003ff30000 (usable) modified: 000000003ff30000 - 000000003ff40000 (ACPI data) modified: 000000003ff40000 - 000000003fff0000 (ACPI NVS) modified: 000000003fff0000 - 0000000040000000 (reserved) modified: 00000000fff80000 - 0000000100000000 (reserved) initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-000000003ff30000 0000000000 - 003fe00000 page 2M 003fe00000 - 003ff30000 page 4k kernel direct mapping tables up to 3ff30000 @ 8000-b000 ACPI: RSDP 00000000000fa8b0 00014 (v00 ACPIAM) ACPI: RSDT 000000003ff30000 00030 (v01 A M I OEMRSDT 01000415 MSFT 00000097) ACPI: FACP 000000003ff30200 00081 (v01 A M I OEMFACP 01000415 MSFT 00000097) ACPI: DSDT 000000003ff303e0 036A8 (v01 K8V__ K8V__086 00000086 MSFT 0100000D) ACPI: FACS 000000003ff40000 00040 ACPI: APIC 000000003ff30390 0004A (v01 A M I OEMAPIC 01000415 MSFT 00000097) ACPI: OEMB 000000003ff40040 0003F (v01 A M I OEMBIOS 01000415 MSFT 00000097) ACPI: Local APIC address 0xfee00000 (6 early reservations) ==> bootmem [0000000000 - 003ff30000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 00033027cc] TEXT DATA BSS ==> [0001000000 - 00033027cc] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #4 [0003303000 - 0003303290] BRK ==> [0003303000 - 0003303290] #5 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880003800000-ffff8800045fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x00000001 0: 0x00000006 -> 0x0000009f 0: 0x00000100 -> 0x0003ff30 On node 0 totalpages: 261834 DMA zone: 56 pages used for memmap DMA zone: 100 pages reserved DMA zone: 3838 pages, LIFO batch:0 DMA32 zone: 3526 pages used for memmap DMA32 zone: 254314 pages, LIFO batch:31 Looks like a VIA chipset. Disabling IOMMU. Override with iommu=allowed ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information mapped APIC to ffffffffff5fc000 (fee00000) mapped IOAPIC to ffffffffff5fb000 (fec00000) nr_irqs_gsi: 24 PM: Registered nosave memory: 0000000000001000 - 0000000000006000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 Allocating PCI resources starting at 40000000 (gap: 40000000:bff80000) Booting paravirtualized kernel on bare hardware Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258152 Kernel command line: root=/dev/sda1 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty debug initcall_debug apic=verbose sysrq_always_enabled 5 ignore_loglevel debug: sysrq always enabled. PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Initializing CPU#0 Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 994888k/1047744k available (14358k kernel code, 408k absent, 51900k reserved, 8789k data, 800k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. NR_IRQS:288 Console: colour VGA+ 80x25 console [tty0] enabled, bootconsole disabled console [ttyS0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 6367 kB per task-struct memory footprint: 2688 bytes ------------------------ | Locking API testsuite: ---------------------------------------------------------------------------- | spin |wlock |rlock |mutex | wsem | rsem | -------------------------------------------------------------------------- A-A deadlock: ok | ok | ok | ok | ok | ok | A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | double unlock: ok | ok | ok | ok | ok | ok | initialize held: ok | ok | ok | ok | ok | ok | bad unlock order: ok | ok | ok | ok | ok | ok | -------------------------------------------------------------------------- recursive read-lock: | ok | | ok | recursive read-lock #2: | ok | | ok | mixed read-write-lock: | ok | | ok | mixed write-read-lock: | ok | | ok | -------------------------------------------------------------------------- hard-irqs-on + irq-safe-A/12: ok | ok | ok | soft-irqs-on + irq-safe-A/12: ok | ok | ok | hard-irqs-on + irq-safe-A/21: ok | ok | ok | soft-irqs-on + irq-safe-A/21: ok | ok | ok | sirq-safe-A => hirqs-on/12: ok | ok | ok | sirq-safe-A => hirqs-on/21: ok | ok | ok | hard-safe-A + irqs-on/12: ok | ok | ok | soft-safe-A + irqs-on/12: ok | ok | ok | hard-safe-A + irqs-on/21: ok | ok | ok | soft-safe-A + irqs-on/21: ok | ok | ok | hard-safe-A + unsafe-B #1/123: ok | ok | ok | soft-safe-A + unsafe-B #1/123: ok | ok | ok | hard-safe-A + unsafe-B #1/132: ok | ok | ok | soft-safe-A + unsafe-B #1/132: ok | ok | ok | hard-safe-A + unsafe-B #1/213: ok | ok | ok | soft-safe-A + unsafe-B #1/213: ok | ok | ok | hard-safe-A + unsafe-B #1/231: ok | ok | ok | soft-safe-A + unsafe-B #1/231: ok | ok | ok | hard-safe-A + unsafe-B #1/312: ok | ok | ok | soft-safe-A + unsafe-B #1/312: ok | ok | ok | hard-safe-A + unsafe-B #1/321: ok | ok | ok | soft-safe-A + unsafe-B #1/321: ok | ok | ok | hard-safe-A + unsafe-B #2/123: ok | ok | ok | soft-safe-A + unsafe-B #2/123: ok | ok | ok | hard-safe-A + unsafe-B #2/132: ok | ok | ok | soft-safe-A + unsafe-B #2/132: ok | ok | ok | hard-safe-A + unsafe-B #2/213: ok | ok | ok | soft-safe-A + unsafe-B #2/213: ok | ok | ok | hard-safe-A + unsafe-B #2/231: ok | ok | ok | soft-safe-A + unsafe-B #2/231: ok | ok | ok | hard-safe-A + unsafe-B #2/312: ok | ok | ok | soft-safe-A + unsafe-B #2/312: ok | ok | ok | hard-safe-A + unsafe-B #2/321: ok | ok | ok | soft-safe-A + unsafe-B #2/321: ok | ok | ok | hard-irq lock-inversion/123: ok | ok | ok | soft-irq lock-inversion/123: ok | ok | ok | hard-irq lock-inversion/132: ok | ok | ok | soft-irq lock-inversion/132: ok | ok | ok | hard-irq lock-inversion/213: ok | ok | ok | soft-irq lock-inversion/213: ok | ok | ok | hard-irq lock-inversion/231: ok | ok | ok | soft-irq lock-inversion/231: ok | ok | ok | hard-irq lock-inversion/312: ok | ok | ok | soft-irq lock-inversion/312: ok | ok | ok | hard-irq lock-inversion/321: ok | ok | ok | soft-irq lock-inversion/321: ok | ok | ok | hard-irq read-recursion/123: ok | soft-irq read-recursion/123: ok | hard-irq read-recursion/132: ok | soft-irq read-recursion/132: ok | hard-irq read-recursion/213: ok | soft-irq read-recursion/213: ok | hard-irq read-recursion/231: ok | soft-irq read-recursion/231: ok | hard-irq read-recursion/312: ok | soft-irq read-recursion/312: ok | hard-irq read-recursion/321: ok | soft-irq read-recursion/321: ok | ------------------------------------------------------- Good, all 218 testcases passed! | --------------------------------- ODEBUG: 8 of 8 active objects replaced Fast TSC calibration using PIT Detected 2002.511 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4006.89 BogoMIPS (lpj=6675036) Security Framework initialized TOMOYO Linux initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) tseg: 0000000000 mce: CPU supports 5 MCE banks Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 08 ACPI: Core revision 20090903 calling spawn_ksoftirqd+0x0/0x76 @ 1 initcall spawn_ksoftirqd+0x0/0x76 returned 0 after 0 usecs calling relay_init+0x0/0x33 @ 1 initcall relay_init+0x0/0x33 returned 0 after 0 usecs Setting APIC routing to flat enabled ExtINT on CPU#0 ENABLING IO-APIC IRQs init IO_APIC IRQs 1-0 (apicid-pin) not connected IOAPIC[0]: Set routing entry (1-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-9 -> 0x39 -> IRQ 9 Mode:1 Active:1) IOAPIC[0]: Set routing entry (1-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-11 -> 0x3b -> IRQ 11 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) 1-16 1-17 1-18 1-19 1-20 1-21 1-22 1-23 (apicid-pin) not connected ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 Using local APIC timer interrupts. calibrating APIC timer ... ... lapic delta = 1251504 ... PM-Timer delta = 357928 ... PM-Timer result ok ..... delta 1251504 ..... mult: 53755192 ..... calibration result: 667468 ..... CPU clock speed is 2002.2020 MHz. ..... host bus clock speed is 200.0868 MHz. device: 'platform': device_add PM: Adding info for No Bus:platform khelper used greatest stack depth: 5472 bytes left bus: 'platform': registered Registering sysdev class 'cpu' calling init_mmap_min_addr+0x0/0x46 @ 1 initcall init_mmap_min_addr+0x0/0x46 returned 0 after 0 usecs calling net_ns_init+0x0/0x154 @ 1 initcall net_ns_init+0x0/0x154 returned 0 after 0 usecs calling e820_mark_nvs_memory+0x0/0x77 @ 1 initcall e820_mark_nvs_memory+0x0/0x77 returned 0 after 0 usecs calling pci_reboot_init+0x0/0x40 @ 1 initcall pci_reboot_init+0x0/0x40 returned 0 after 0 usecs calling init_lapic_sysfs+0x0/0x54 @ 1 Registering sysdev class 'lapic' Registering sys device of class 'lapic' Registering sys device 'lapic0' initcall init_lapic_sysfs+0x0/0x54 returned 0 after 9765 usecs calling sysctl_init+0x0/0x3d @ 1 initcall sysctl_init+0x0/0x3d returned 0 after 0 usecs calling ksysfs_init+0x0/0xeb @ 1 initcall ksysfs_init+0x0/0xeb returned 0 after 3255 usecs calling async_init+0x0/0x90 @ 1 initcall async_init+0x0/0x90 returned 0 after 0 usecs calling init_jiffies_clocksource+0x0/0x41 @ 1 initcall init_jiffies_clocksource+0x0/0x41 returned 0 after 0 usecs calling pm_init+0x0/0xa0 @ 1 initcall pm_init+0x0/0xa0 returned 0 after 3255 usecs calling pm_disk_init+0x0/0x44 @ 1 initcall pm_disk_init+0x0/0x44 returned 0 after 0 usecs calling swsusp_header_init+0x0/0x60 @ 1 initcall swsusp_header_init+0x0/0x60 returned 0 after 0 usecs calling init_zero_pfn+0x0/0x67 @ 1 initcall init_zero_pfn+0x0/0x67 returned 0 after 0 usecs calling filelock_init+0x0/0x63 @ 1 initcall filelock_init+0x0/0x63 returned 0 after 0 usecs calling init_misc_binfmt+0x0/0x6b @ 1 initcall init_misc_binfmt+0x0/0x6b returned 0 after 0 usecs calling init_script_binfmt+0x0/0x40 @ 1 initcall init_script_binfmt+0x0/0x40 returned 0 after 0 usecs calling init_elf_binfmt+0x0/0x40 @ 1 initcall init_elf_binfmt+0x0/0x40 returned 0 after 0 usecs calling init_compat_elf_binfmt+0x0/0x40 @ 1 initcall init_compat_elf_binfmt+0x0/0x40 returned 0 after 0 usecs calling debugfs_init+0x0/0x8b @ 1 initcall debugfs_init+0x0/0x8b returned 0 after 0 usecs calling securityfs_init+0x0/0x80 @ 1 initcall securityfs_init+0x0/0x80 returned 0 after 0 usecs calling random32_init+0x0/0xd8 @ 1 initcall random32_init+0x0/0xd8 returned 0 after 0 usecs calling cpuidle_init+0x0/0x4d @ 1 initcall cpuidle_init+0x0/0x4d returned 0 after 0 usecs calling virtio_init+0x0/0x60 @ 1 khelper used greatest stack depth: 5232 bytes left bus: 'virtio': registered initcall virtio_init+0x0/0x60 returned 0 after 6510 usecs calling sock_init+0x0/0x90 @ 1 initcall sock_init+0x0/0x90 returned 0 after 0 usecs calling netpoll_init+0x0/0x69 @ 1 initcall netpoll_init+0x0/0x69 returned 0 after 0 usecs calling netlink_proto_init+0x0/0x195 @ 1 NET: Registered protocol family 16 initcall netlink_proto_init+0x0/0x195 returned 0 after 3255 usecs calling bdi_class_init+0x0/0x68 @ 1 device class 'bdi': registering initcall bdi_class_init+0x0/0x68 returned 0 after 3255 usecs calling kobject_uevent_init+0x0/0x7b @ 1 initcall kobject_uevent_init+0x0/0x7b returned 0 after 0 usecs calling pcibus_class_init+0x0/0x43 @ 1 device class 'pci_bus': registering initcall pcibus_class_init+0x0/0x43 returned 0 after 6510 usecs calling pci_driver_init+0x0/0x40 @ 1 bus: 'pci': registered initcall pci_driver_init+0x0/0x40 returned 0 after 3255 usecs calling lcd_class_init+0x0/0x80 @ 1 device class 'lcd': registering initcall lcd_class_init+0x0/0x80 returned 0 after 3255 usecs calling backlight_class_init+0x0/0x93 @ 1 device class 'backlight': registering initcall backlight_class_init+0x0/0x93 returned 0 after 3255 usecs calling video_output_class_init+0x0/0x45 @ 1 device class 'video_output': registering initcall video_output_class_init+0x0/0x45 returned 0 after 3255 usecs calling tty_class_init+0x0/0x5f @ 1 device class 'tty': registering initcall tty_class_init+0x0/0x5f returned 0 after 3255 usecs calling vtconsole_class_init+0x0/0xf1 @ 1 device class 'vtconsole': registering device: 'vtcon0': device_add PM: Adding info for No Bus:vtcon0 initcall vtconsole_class_init+0x0/0xf1 returned 0 after 9765 usecs calling spi_init+0x0/0xa9 @ 1 bus: 'spi': registered device class 'spi_master': registering initcall spi_init+0x0/0xa9 returned 0 after 6510 usecs calling i2c_init+0x0/0x92 @ 1 bus: 'i2c': registered bus: 'i2c': add driver dummy i2c-core: driver [dummy] registered initcall i2c_init+0x0/0x92 returned 0 after 9765 usecs calling amd_postcore_init+0x0/0x77 @ 1 node 0 link 0: io port [1000, ffffff] TOM: 0000000040000000 aka 1024M node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [40000000, fe0bffff] bus: [00,ff] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [a0000, bffff] bus: 00 index 2 mmio: [40000000, fcffffffff] initcall amd_postcore_init+0x0/0x77 returned 0 after 26041 usecs calling arch_kdebugfs_init+0x0/0x250 @ 1 initcall arch_kdebugfs_init+0x0/0x250 returned 0 after 0 usecs calling ffh_cstate_init+0x0/0x5d @ 1 initcall ffh_cstate_init+0x0/0x5d returned -1 after 0 usecs initcall ffh_cstate_init+0x0/0x5d returned with error code -1 calling acpi_pci_init+0x0/0x8b @ 1 ACPI: bus type pci registered initcall acpi_pci_init+0x0/0x8b returned 0 after 3255 usecs calling dmi_id_init+0x0/0x336 @ 1 device class 'dmi': registering device: 'id': device_add PM: Adding info for No Bus:id initcall dmi_id_init+0x0/0x336 returned 0 after 6510 usecs calling dma_bus_init+0x0/0x6b @ 1 device class 'dma': registering initcall dma_bus_init+0x0/0x6b returned 0 after 3255 usecs calling dma_channel_table_init+0x0/0x145 @ 1 initcall dma_channel_table_init+0x0/0x145 returned 0 after 0 usecs calling dca_init+0x0/0x4d @ 1 dca service started, version 1.12.1 device class 'dca': registering initcall dca_init+0x0/0x4d returned 0 after 6510 usecs calling pci_arch_init+0x0/0x80 @ 1 PCI: Using configuration type 1 for base access initcall pci_arch_init+0x0/0x80 returned 0 after 3255 usecs calling topology_init+0x0/0x40 @ 1 Registering sys device of class 'cpu' Registering sys device 'cpu0' initcall topology_init+0x0/0x40 returned 0 after 6510 usecs calling param_sysfs_init+0x0/0x380 @ 1 initcall param_sysfs_init+0x0/0x380 returned 0 after 211588 usecs calling pm_sysrq_init+0x0/0x50 @ 1 initcall pm_sysrq_init+0x0/0x50 returned 0 after 0 usecs calling audit_watch_init+0x0/0x60 @ 1 initcall audit_watch_init+0x0/0x60 returned 0 after 0 usecs calling init_slow_work+0x0/0x63 @ 1 initcall init_slow_work+0x0/0x63 returned 0 after 0 usecs calling default_bdi_init+0x0/0xe3 @ 1 device: 'default': device_add PM: Adding info for No Bus:default initcall default_bdi_init+0x0/0xe3 returned 0 after 6510 usecs calling init_bio+0x0/0xfd @ 1 bio: create slab at 0 initcall init_bio+0x0/0xfd returned 0 after 3255 usecs calling fsnotify_init+0x0/0x3d @ 1 initcall fsnotify_init+0x0/0x3d returned 0 after 0 usecs calling fsnotify_notification_init+0x0/0x129 @ 1 initcall fsnotify_notification_init+0x0/0x129 returned 0 after 0 usecs calling cryptomgr_init+0x0/0x40 @ 1 initcall cryptomgr_init+0x0/0x40 returned 0 after 0 usecs calling blk_settings_init+0x0/0x53 @ 1 initcall blk_settings_init+0x0/0x53 returned 0 after 0 usecs calling blk_ioc_init+0x0/0x56 @ 1 initcall blk_ioc_init+0x0/0x56 returned 0 after 0 usecs calling blk_softirq_init+0x0/0x60 @ 1 initcall blk_softirq_init+0x0/0x60 returned 0 after 0 usecs calling blk_iopoll_setup+0x0/0x60 @ 1 initcall blk_iopoll_setup+0x0/0x60 returned 0 after 0 usecs calling genhd_device_init+0x0/0x8c @ 1 device class 'block': registering initcall genhd_device_init+0x0/0x8c returned 0 after 3255 usecs calling blk_dev_integrity_init+0x0/0x53 @ 1 initcall blk_dev_integrity_init+0x0/0x53 returned 0 after 0 usecs calling pci_slot_init+0x0/0x80 @ 1 initcall pci_slot_init+0x0/0x80 returned 0 after 0 usecs calling fbmem_init+0x0/0xc3 @ 1 device class 'graphics': registering initcall fbmem_init+0x0/0xc3 returned 0 after 3255 usecs calling acpi_init+0x0/0x288 @ 1 ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing bus: 'acpi': registered ACPI: Enumerating devices from [\] device: 'LNXSYSTM:00': device_add bus: 'acpi': add device LNXSYSTM:00 PM: Adding info for acpi:LNXSYSTM:00 acpi LNXSYSTM:00: __pm_runtime_idle()! acpi LNXSYSTM:00: __pm_runtime_idle() returns -11! device: 'LNXCPU:00': device_add bus: 'acpi': add device LNXCPU:00 PM: Adding info for acpi:LNXCPU:00 acpi LNXCPU:00: __pm_runtime_idle()! acpi LNXCPU:00: __pm_runtime_idle() returns -11! device: 'LNXSYBUS:00': device_add bus: 'acpi': add device LNXSYBUS:00 PM: Adding info for acpi:LNXSYBUS:00 acpi LNXSYBUS:00: __pm_runtime_idle()! acpi LNXSYBUS:00: __pm_runtime_idle() returns -11! device: 'PNP0A03:00': device_add bus: 'acpi': add device PNP0A03:00 PM: Adding info for acpi:PNP0A03:00 acpi PNP0A03:00: __pm_runtime_idle()! acpi PNP0A03:00: __pm_runtime_idle() returns -11! device: 'device:00': device_add bus: 'acpi': add device device:00 PM: Adding info for acpi:device:00 acpi device:00: __pm_runtime_idle()! acpi device:00: __pm_runtime_idle() returns -11! device: 'device:01': device_add bus: 'acpi': add device device:01 PM: Adding info for acpi:device:01 acpi device:01: __pm_runtime_idle()! acpi device:01: __pm_runtime_idle() returns -11! device: 'device:02': device_add bus: 'acpi': add device device:02 PM: Adding info for acpi:device:02 acpi device:02: __pm_runtime_idle()! acpi device:02: __pm_runtime_idle() returns -11! device: 'PNP0000:00': device_add bus: 'acpi': add device PNP0000:00 PM: Adding info for acpi:PNP0000:00 acpi PNP0000:00: __pm_runtime_idle()! acpi PNP0000:00: __pm_runtime_idle() returns -11! device: 'PNP0200:00': device_add bus: 'acpi': add device PNP0200:00 PM: Adding info for acpi:PNP0200:00 acpi PNP0200:00: __pm_runtime_idle()! acpi PNP0200:00: __pm_runtime_idle() returns -11! device: 'PNP0100:00': device_add bus: 'acpi': add device PNP0100:00 PM: Adding info for acpi:PNP0100:00 acpi PNP0100:00: __pm_runtime_idle()! acpi PNP0100:00: __pm_runtime_idle() returns -11! device: 'PNP0B00:00': device_add bus: 'acpi': add device PNP0B00:00 PM: Adding info for acpi:PNP0B00:00 acpi PNP0B00:00: __pm_runtime_idle()! acpi PNP0B00:00: __pm_runtime_idle() returns -11! device: 'PNP0800:00': device_add bus: 'acpi': add device PNP0800:00 PM: Adding info for acpi:PNP0800:00 acpi PNP0800:00: __pm_runtime_idle()! acpi PNP0800:00: __pm_runtime_idle() returns -11! device: 'PNP0C04:00': device_add bus: 'acpi': add device PNP0C04:00 PM: Adding info for acpi:PNP0C04:00 acpi PNP0C04:00: __pm_runtime_idle()! acpi PNP0C04:00: __pm_runtime_idle() returns -11! device: 'PNP0700:00': device_add bus: 'acpi': add device PNP0700:00 PM: Adding info for acpi:PNP0700:00 acpi PNP0700:00: __pm_runtime_idle()! acpi PNP0700:00: __pm_runtime_idle() returns -11! device: 'PNP0400:00': device_add bus: 'acpi': add device PNP0400:00 PM: Adding info for acpi:PNP0400:00 acpi PNP0400:00: __pm_runtime_idle()! acpi PNP0400:00: __pm_runtime_idle() returns -11! device: 'PNP0C02:00': device_add bus: 'acpi': add device PNP0C02:00 PM: Adding info for acpi:PNP0C02:00 acpi PNP0C02:00: __pm_runtime_idle()! acpi PNP0C02:00: __pm_runtime_idle() returns -11! device: 'PNP0C02:01': device_add bus: 'acpi': add device PNP0C02:01 PM: Adding info for acpi:PNP0C02:01 acpi PNP0C02:01: __pm_runtime_idle()! acpi PNP0C02:01: __pm_runtime_idle() returns -11! device: 'PNP0501:00': device_add bus: 'acpi': add device PNP0501:00 PM: Adding info for acpi:PNP0501:00 acpi PNP0501:00: __pm_runtime_idle()! acpi PNP0501:00: __pm_runtime_idle() returns -11! device: 'PNP0501:01': device_add bus: 'acpi': add device PNP0501:01 PM: Adding info for acpi:PNP0501:01 acpi PNP0501:01: __pm_runtime_idle()! acpi PNP0501:01: __pm_runtime_idle() returns -11! device: 'device:03': device_add bus: 'acpi': add device device:03 PM: Adding info for acpi:device:03 acpi device:03: __pm_runtime_idle()! acpi device:03: __pm_runtime_idle() returns -11! device: 'device:04': device_add bus: 'acpi': add device device:04 PM: Adding info for acpi:device:04 acpi device:04: __pm_runtime_idle()! acpi device:04: __pm_runtime_idle() returns -11! device: 'device:05': device_add bus: 'acpi': add device device:05 PM: Adding info for acpi:device:05 acpi device:05: __pm_runtime_idle()! acpi device:05: __pm_runtime_idle() returns -11! device: 'device:06': device_add bus: 'acpi': add device device:06 PM: Adding info for acpi:device:06 acpi device:06: __pm_runtime_idle()! acpi device:06: __pm_runtime_idle() returns -11! device: 'device:07': device_add bus: 'acpi': add device device:07 PM: Adding info for acpi:device:07 acpi device:07: __pm_runtime_idle()! acpi device:07: __pm_runtime_idle() returns -11! device: 'device:08': device_add bus: 'acpi': add device device:08 PM: Adding info for acpi:device:08 acpi device:08: __pm_runtime_idle()! acpi device:08: __pm_runtime_idle() returns -11! device: 'device:09': device_add bus: 'acpi': add device device:09 PM: Adding info for acpi:device:09 acpi device:09: __pm_runtime_idle()! acpi device:09: __pm_runtime_idle() returns -11! device: 'device:0a': device_add bus: 'acpi': add device device:0a PM: Adding info for acpi:device:0a acpi device:0a: __pm_runtime_idle()! acpi device:0a: __pm_runtime_idle() returns -11! device: 'device:0b': device_add bus: 'acpi': add device device:0b PM: Adding info for acpi:device:0b acpi device:0b: __pm_runtime_idle()! acpi device:0b: __pm_runtime_idle() returns -11! device: 'device:0c': device_add bus: 'acpi': add device device:0c PM: Adding info for acpi:device:0c acpi device:0c: __pm_runtime_idle()! acpi device:0c: __pm_runtime_idle() returns -11! device: 'device:0d': device_add bus: 'acpi': add device device:0d PM: Adding info for acpi:device:0d acpi device:0d: __pm_runtime_idle()! acpi device:0d: __pm_runtime_idle() returns -11! device: 'device:0e': device_add bus: 'acpi': add device device:0e PM: Adding info for acpi:device:0e acpi device:0e: __pm_runtime_idle()! acpi device:0e: __pm_runtime_idle() returns -11! device: 'device:0f': device_add bus: 'acpi': add device device:0f Clocksource tsc unstable (delta = 137536449 ns) PM: Adding info for acpi:device:0f acpi device:0f: __pm_runtime_idle()! acpi device:0f: __pm_runtime_idle() returns -11! device: 'device:10': device_add bus: 'acpi': add device device:10 PM: Adding info for acpi:device:10 acpi device:10: __pm_runtime_idle()! acpi device:10: __pm_runtime_idle() returns -11! device: 'PNP0C01:00': device_add bus: 'acpi': add device PNP0C01:00 PM: Adding info for acpi:PNP0C01:00 acpi PNP0C01:00: __pm_runtime_idle()! acpi PNP0C01:00: __pm_runtime_idle() returns -11! device: 'PNP0C0C:00': device_add bus: 'acpi': add device PNP0C0C:00 PM: Adding info for acpi:PNP0C0C:00 acpi PNP0C0C:00: __pm_runtime_idle()! acpi PNP0C0C:00: __pm_runtime_idle() returns -11! device: 'PNP0C0F:00': device_add bus: 'acpi': add device PNP0C0F:00 PM: Adding info for acpi:PNP0C0F:00 acpi PNP0C0F:00: __pm_runtime_idle()! acpi PNP0C0F:00: __pm_runtime_idle() returns -11! device: 'PNP0C0F:01': device_add bus: 'acpi': add device PNP0C0F:01 PM: Adding info for acpi:PNP0C0F:01 acpi PNP0C0F:01: __pm_runtime_idle()! acpi PNP0C0F:01: __pm_runtime_idle() returns -11! device: 'PNP0C0F:02': device_add bus: 'acpi': add device PNP0C0F:02 PM: Adding info for acpi:PNP0C0F:02 acpi PNP0C0F:02: __pm_runtime_idle()! acpi PNP0C0F:02: __pm_runtime_idle() returns -11! device: 'PNP0C0F:03': device_add bus: 'acpi': add device PNP0C0F:03 PM: Adding info for acpi:PNP0C0F:03 acpi PNP0C0F:03: __pm_runtime_idle()! acpi PNP0C0F:03: __pm_runtime_idle() returns -11! device: 'PNP0C0F:04': device_add bus: 'acpi': add device PNP0C0F:04 PM: Adding info for acpi:PNP0C0F:04 acpi PNP0C0F:04: __pm_runtime_idle()! acpi PNP0C0F:04: __pm_runtime_idle() returns -11! device: 'PNP0C0F:05': device_add bus: 'acpi': add device PNP0C0F:05 PM: Adding info for acpi:PNP0C0F:05 acpi PNP0C0F:05: __pm_runtime_idle()! acpi PNP0C0F:05: __pm_runtime_idle() returns -11! device: 'PNP0C0F:06': device_add bus: 'acpi': add device PNP0C0F:06 PM: Adding info for acpi:PNP0C0F:06 acpi PNP0C0F:06: __pm_runtime_idle()! acpi PNP0C0F:06: __pm_runtime_idle() returns -11! device: 'PNP0C0F:07': device_add bus: 'acpi': add device PNP0C0F:07 PM: Adding info for acpi:PNP0C0F:07 acpi PNP0C0F:07: __pm_runtime_idle()! acpi PNP0C0F:07: __pm_runtime_idle() returns -11! device: 'PNP0C0E:00': device_add bus: 'acpi': add device PNP0C0E:00 PM: Adding info for acpi:PNP0C0E:00 acpi PNP0C0E:00: __pm_runtime_idle()! acpi PNP0C0E:00: __pm_runtime_idle() returns -11! device: 'LNXTHERM:00': device_add bus: 'acpi': add device LNXTHERM:00 PM: Adding info for acpi:LNXTHERM:00 acpi LNXTHERM:00: __pm_runtime_idle()! acpi LNXTHERM:00: __pm_runtime_idle() returns -11! device: 'LNXPWRBN:00': device_add bus: 'acpi': add device LNXPWRBN:00 PM: Adding info for acpi:LNXPWRBN:00 acpi LNXPWRBN:00: __pm_runtime_idle()! acpi LNXPWRBN:00: __pm_runtime_idle() returns -11! bus: 'acpi': add driver ec bus: 'acpi': add driver power initcall acpi_init+0x0/0x288 returned 0 after 996092 usecs calling dock_init+0x0/0xb4 @ 1 ACPI: No dock devices found. initcall dock_init+0x0/0xb4 returned 0 after 3255 usecs calling acpi_pci_root_init+0x0/0x4f @ 1 bus: 'acpi': add driver pci_root bus: 'acpi': driver_probe_device: matched device PNP0A03:00 with driver pci_root bus: 'acpi': really_probe: probing driver pci_root with device PNP0A03:00 ACPI: PCI Root Bridge [PCI0] (0000:00) device: 'pci0000:00': device_add PM: Adding info for No Bus:pci0000:00 device: '0000:00': device_add PM: Adding info for No Bus:0000:00 PCI: Scanning bus 0000:00 pci 0000:00:00.0: found [1106:3188] class 000600 header type 00 pci 0000:00:00.0: calling quirk_no_ata_d3+0x0/0x42 pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf8000000-0xfbffffff] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x1e4 pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x720 pci 0000:00:01.0: found [1106:b188] class 000604 header type 01 pci 0000:00:01.0: calling quirk_no_ata_d3+0x0/0x42 pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x1e4 pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x720 pci 0000:00:01.0: supports D1 pci 0000:00:07.0: found [1106:3044] class 000c00 header type 00 pci 0000:00:07.0: calling quirk_no_ata_d3+0x0/0x42 pci 0000:00:07.0: reg 10 32bit mmio: [0xfde00000-0xfde007ff] pci 0000:00:07.0: reg 14 io port: [0xec00-0xec7f] pci 0000:00:07.0: calling quirk_resource_alignment+0x0/0x1e4 pci 0000:00:07.0: calling quirk_usb_early_handoff+0x0/0x720 pci 0000:00:07.0: supports D2 pci 0000:00:07.0: PME# supported from D2 D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:0a.0: found [10b7:1700] class 000200 header type 00 pci 0000:00:0a.0: reg 10 32bit mmio: [0xfd900000-0xfd903fff] pci 0000:00:0a.0: reg 14 io port: [0xb000-0xb0ff] pci 0000:00:0a.0: calling quirk_resource_alignment+0x0/0x1e4 pci 0000:00:0a.0: calling quirk_usb_early_handoff+0x0/0x720 pci 0000:00:0a.0: supports D1 D2 pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:0d.0: found [109e:036e] class 000400 header type 00 pci 0000:00:0d.0: reg 10 32bit mmio pref: [0xf7e00000-0xf7e00fff] pci 0000:00:0d.0: calling quirk_resource_alignment+0x0/0x1e4 pci 0000:00:0d.0: calling quirk_usb_early_handoff+0x0/0x720 pci 0000:00:0d.1: found [109e:0878] class 000480 header type 00 pci 0000:00:0d.1: reg 10 32bit mmio pref: [0xf7f00000-0xf7f00fff] pci 0000:00:0d.1: calling quirk_resource_alignment+0x0/0x1e4 pci 0000:00:0d.1: calling quirk_usb_early_handoff+0x0/0x720 pci 0000:00:0f.0: found [1106:3149] class 000104 header type 00 pci 0000:00:0f.0: calling quirk_no_ata_d3+0x0/0x42 pci 0000:00:0f.0: reg 10 io port: [0xe800-0xe807] pci 0000:00:0f.0: reg 14 io port: [0xe400-0xe403] pci 0000:00:0f.0: reg 18 io port: [0xe000-0xe007] pci 0000:00:0f.0: reg 1c io port: [0xd800-0xd803] pci 0000:00:0f.0: reg 20 io port: [0xd400-0xd40f] pci 0000:00:0f.0: reg 24 io port: [0xd000-0xd0ff] pci 0000:00:0f.0: calling quirk_resource_alignment+0x0/0x1e4 pci 0000:00:0f.0: calling quirk_usb_early_handoff+0x0/0x720 pci 0000:00:0f.1: found [1106:0571] class 000101 header type 00 pci 0000:00:0f.1: calling quirk_no_ata_d3+0x0/0x42 pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f] pci 0000:00:0f.1: calling quirk_resource_alignment+0x0/0x1e4 pci 0000:00:0f.1: calling quirk_usb_early_handoff+0x0/0x720 pci 0000:00:10.0: found [1106:3038] class 000c03 header type 00 pci 0000:00:10.0: calling quirk_no_ata_d3+0x0/0x42 pci 0000:00:10.0: reg 20 io port: [0xb400-0xb41f] pci 0000:00:10.0: calling quirk_resource_alignment+0x0/0x1e4 pci 0000:00:10.0: calling quirk_usb_early_handoff+0x0/0x720 pci 0000:00:10.0: supports D1 D2 pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.0: PME# disabled pci 0000:00:10.1: found [1106:3038] class 000c03 header type 00 pci 0000:00:10.1: calling quirk_no_ata_d3+0x0/0x42 pci 0000:00:10.1: reg 20 io port: [0xb800-0xb81f] pci 0000:00:10.1: calling quirk_resource_alignment+0x0/0x1e4 pci 0000:00:10.1: calling quirk_usb_early_handoff+0x0/0x720 pci 0000:00:10.1: supports D1 D2 pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.1: PME# disabled pci 0000:00:10.2: found [1106:3038] class 000c03 header type 00 pci 0000:00:10.2: calling quirk_no_ata_d3+0x0/0x42 pci 0000:00:10.2: reg 20 io port: [0xc000-0xc01f] pci 0000:00:10.2: calling quirk_resource_alignment+0x0/0x1e4 pci 0000:00:10.2: calling quirk_usb_early_handoff+0x0/0x720 pci 0000:00:10.2: supports D1 D2 pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.2: PME# disabled pci 0000:00:10.3: found [1106:3038] class 000c03 header type 00 pci 0000:00:10.3: calling quirk_no_ata_d3+0x0/0x42 pci 0000:00:10.3: reg 20 io port: [0xc400-0xc41f] pci 0000:00:10.3: calling quirk_resource_alignment+0x0/0x1e4 pci 0000:00:10.3: calling quirk_usb_early_handoff+0x0/0x720 pci 0000:00:10.3: supports D1 D2 pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.3: PME# disabled pci 0000:00:10.4: found [1106:3104] class 000c03 header type 00 pci 0000:00:10.4: calling quirk_no_ata_d3+0x0/0x42 pci 0000:00:10.4: reg 10 32bit mmio: [0xfdf00000-0xfdf000ff] pci 0000:00:10.4: calling quirk_resource_alignment+0x0/0x1e4 pci 0000:00:10.4: calling quirk_usb_early_handoff+0x0/0x720 pci 0000:00:10.4: supports D1 D2 pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.4: PME# disabled pci 0000:00:11.0: found [1106:3227] class 000601 header type 00 pci 0000:00:11.0: calling quirk_no_ata_d3+0x0/0x42 pci 0000:00:11.0: calling vt8237_force_enable_hpet+0x0/0x1a0 HPET not enabled in BIOS. You might try hpet=force boot option pci 0000:00:11.0: calling asus_hides_ac97_lpc+0x0/0x120 pci 0000:00:11.0: Enabled onboard AC97/MC97 devices pci 0000:00:11.0: calling quirk_via_bridge+0x0/0xe0 pci 0000:00:11.0: calling quirk_resource_alignment+0x0/0x1e4 pci 0000:00:11.0: calling quirk_usb_early_handoff+0x0/0x720 pci 0000:00:11.0: calling pci_fixup_msi_k8t_onboard_sound+0x0/0x107 pci 0000:00:11.5: found [1106:3059] class 000401 header type 00 pci 0000:00:11.5: calling quirk_no_ata_d3+0x0/0x42 pci 0000:00:11.5: reg 10 io port: [0xc800-0xc8ff] pci 0000:00:11.5: calling quirk_resource_alignment+0x0/0x1e4 pci 0000:00:11.5: calling quirk_usb_early_handoff+0x0/0x720 pci 0000:00:11.5: supports D1 D2 pci 0000:00:11.6: found [1106:3068] class 000780 header type 00 pci 0000:00:11.6: calling quirk_no_ata_d3+0x0/0x42 pci 0000:00:11.6: reg 10 io port: [0x00-0xff] pci 0000:00:11.6: calling quirk_resource_alignment+0x0/0x1e4 pci 0000:00:11.6: calling quirk_usb_early_handoff+0x0/0x720 pci 0000:00:18.0: found [1022:1100] class 000600 header type 00 pci 0000:00:18.0: calling quirk_resource_alignment+0x0/0x1e4 pci 0000:00:18.0: calling quirk_usb_early_handoff+0x0/0x720 pci 0000:00:18.1: found [1022:1101] class 000600 header type 00 pci 0000:00:18.1: calling quirk_resource_alignment+0x0/0x1e4 pci 0000:00:18.1: calling quirk_usb_early_handoff+0x0/0x720 pci 0000:00:18.2: found [1022:1102] class 000600 header type 00 pci 0000:00:18.2: calling quirk_resource_alignment+0x0/0x1e4 pci 0000:00:18.2: calling quirk_usb_early_handoff+0x0/0x720 pci 0000:00:18.3: found [1022:1103] class 000600 header type 00 pci 0000:00:18.3: calling quirk_resource_alignment+0x0/0x1e4 pci 0000:00:18.3: calling quirk_usb_early_handoff+0x0/0x720 PCI: Fixups for bus 0000:00 pci 0000:00:01.0: scanning behind bridge, config 010100, pass 0 PCI: Scanning bus 0000:01 pci 0000:01:00.0: found [1002:5964] class 000300 header type 00 pci 0000:01:00.0: calling quirk_no_ata_d3+0x0/0x42 pci 0000:01:00.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff] pci 0000:01:00.0: reg 14 io port: [0xa000-0xa0ff] pci 0000:01:00.0: reg 18 32bit mmio: [0xfd800000-0xfd80ffff] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfd700000-0xfd71ffff] pci 0000:01:00.0: calling quirk_resource_alignment+0x0/0x1e4 pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0x720 pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: found [1002:5d44] class 000380 header type 00 pci 0000:01:00.1: calling quirk_no_ata_d3+0x0/0x42 pci 0000:01:00.1: reg 10 32bit mmio pref: [0xe0000000-0xe7ffffff] pci 0000:01:00.1: reg 14 32bit mmio: [0xfd600000-0xfd60ffff] pci 0000:01:00.1: calling quirk_resource_alignment+0x0/0x1e4 pci 0000:01:00.1: calling quirk_usb_early_handoff+0x0/0x720 pci 0000:01:00.1: supports D1 D2 PCI: Fixups for bus 0000:01 pci 0000:00:01.0: bridge io port: [0xa000-0xafff] pci 0000:00:01.0: bridge 32bit mmio: [0xfd300000-0xfd8fffff] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd7b00000-0xf7afffff] PCI: Bus scan for 0000:01 returning with max=01 pci 0000:00:01.0: scanning behind bridge, config 010100, pass 1 PCI: Bus scan for 0000:00 returning with max=01 pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] device: '0000:00:00.0': device_add bus: 'pci': add device 0000:00:00.0 PM: Adding info for pci:0000:00:00.0 pci 0000:00:00.0: __pm_runtime_idle()! pci 0000:00:00.0: __pm_runtime_idle() returns -11! device: '0000:00:01.0': device_add bus: 'pci': add device 0000:00:01.0 PM: Adding info for pci:0000:00:01.0 pci 0000:00:01.0: __pm_runtime_idle()! pci 0000:00:01.0: __pm_runtime_idle() returns -11! device: '0000:00:07.0': device_add bus: 'pci': add device 0000:00:07.0 PM: Adding info for pci:0000:00:07.0 pci 0000:00:07.0: __pm_runtime_idle()! pci 0000:00:07.0: __pm_runtime_idle() returns -11! device: '0000:00:0a.0': device_add bus: 'pci': add device 0000:00:0a.0 PM: Adding info for pci:0000:00:0a.0 pci 0000:00:0a.0: __pm_runtime_idle()! pci 0000:00:0a.0: __pm_runtime_idle() returns -11! device: '0000:00:0d.0': device_add bus: 'pci': add device 0000:00:0d.0 PM: Adding info for pci:0000:00:0d.0 pci 0000:00:0d.0: __pm_runtime_idle()! pci 0000:00:0d.0: __pm_runtime_idle() returns -11! device: '0000:00:0d.1': device_add bus: 'pci': add device 0000:00:0d.1 PM: Adding info for pci:0000:00:0d.1 pci 0000:00:0d.1: __pm_runtime_idle()! pci 0000:00:0d.1: __pm_runtime_idle() returns -11! device: '0000:00:0f.0': device_add bus: 'pci': add device 0000:00:0f.0 PM: Adding info for pci:0000:00:0f.0 pci 0000:00:0f.0: __pm_runtime_idle()! pci 0000:00:0f.0: __pm_runtime_idle() returns -11! device: '0000:00:0f.1': device_add bus: 'pci': add device 0000:00:0f.1 PM: Adding info for pci:0000:00:0f.1 pci 0000:00:0f.1: __pm_runtime_idle()! pci 0000:00:0f.1: __pm_runtime_idle() returns -11! device: '0000:00:10.0': device_add bus: 'pci': add device 0000:00:10.0 PM: Adding info for pci:0000:00:10.0 pci 0000:00:10.0: __pm_runtime_idle()! pci 0000:00:10.0: __pm_runtime_idle() returns -11! device: '0000:00:10.1': device_add bus: 'pci': add device 0000:00:10.1 PM: Adding info for pci:0000:00:10.1 pci 0000:00:10.1: __pm_runtime_idle()! pci 0000:00:10.1: __pm_runtime_idle() returns -11! device: '0000:00:10.2': device_add bus: 'pci': add device 0000:00:10.2 PM: Adding info for pci:0000:00:10.2 pci 0000:00:10.2: __pm_runtime_idle()! pci 0000:00:10.2: __pm_runtime_idle() returns -11! device: '0000:00:10.3': device_add bus: 'pci': add device 0000:00:10.3 PM: Adding info for pci:0000:00:10.3 pci 0000:00:10.3: __pm_runtime_idle()! pci 0000:00:10.3: __pm_runtime_idle() returns -11! device: '0000:00:10.4': device_add bus: 'pci': add device 0000:00:10.4 PM: Adding info for pci:0000:00:10.4 pci 0000:00:10.4: __pm_runtime_idle()! pci 0000:00:10.4: __pm_runtime_idle() returns -11! device: '0000:00:11.0': device_add bus: 'pci': add device 0000:00:11.0 PM: Adding info for pci:0000:00:11.0 pci 0000:00:11.0: __pm_runtime_idle()! pci 0000:00:11.0: __pm_runtime_idle() returns -11! device: '0000:00:11.5': device_add bus: 'pci': add device 0000:00:11.5 PM: Adding info for pci:0000:00:11.5 pci 0000:00:11.5: __pm_runtime_idle()! pci 0000:00:11.5: __pm_runtime_idle() returns -11! device: '0000:00:11.6': device_add bus: 'pci': add device 0000:00:11.6 PM: Adding info for pci:0000:00:11.6 pci 0000:00:11.6: __pm_runtime_idle()! pci 0000:00:11.6: __pm_runtime_idle() returns -11! device: '0000:00:18.0': device_add bus: 'pci': add device 0000:00:18.0 PM: Adding info for pci:0000:00:18.0 pci 0000:00:18.0: __pm_runtime_idle()! pci 0000:00:18.0: __pm_runtime_idle() returns -11! device: '0000:00:18.1': device_add bus: 'pci': add device 0000:00:18.1 PM: Adding info for pci:0000:00:18.1 pci 0000:00:18.1: __pm_runtime_idle()! pci 0000:00:18.1: __pm_runtime_idle() returns -11! device: '0000:00:18.2': device_add bus: 'pci': add device 0000:00:18.2 PM: Adding info for pci:0000:00:18.2 pci 0000:00:18.2: __pm_runtime_idle()! pci 0000:00:18.2: __pm_runtime_idle() returns -11! device: '0000:00:18.3': device_add bus: 'pci': add device 0000:00:18.3 PM: Adding info for pci:0000:00:18.3 pci 0000:00:18.3: __pm_runtime_idle()! pci 0000:00:18.3: __pm_runtime_idle() returns -11! device: '0000:01:00.0': device_add bus: 'pci': add device 0000:01:00.0 PM: Adding info for pci:0000:01:00.0 pci 0000:01:00.0: __pm_runtime_idle()! pci 0000:01:00.0: __pm_runtime_idle() returns -11! device: '0000:01:00.1': device_add bus: 'pci': add device 0000:01:00.1 PM: Adding info for pci:0000:01:00.1 pci 0000:01:00.1: __pm_runtime_idle()! pci 0000:01:00.1: __pm_runtime_idle() returns -11! device: '0000:01': device_add PM: Adding info for No Bus:0000:01 driver: 'PNP0A03:00': driver_bound: bound to device 'pci_root' bus: 'acpi': really_probe: bound device PNP0A03:00 to driver pci_root pci_root PNP0A03:00: __pm_runtime_idle()! pci_root PNP0A03:00: __pm_runtime_idle() returns -11! initcall acpi_pci_root_init+0x0/0x4f returned 0 after 1022133 usecs calling acpi_pci_link_init+0x0/0x6a @ 1 bus: 'acpi': add driver pci_link bus: 'acpi': driver_probe_device: matched device PNP0C0F:00 with driver pci_link bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:00 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) driver: 'PNP0C0F:00': driver_bound: bound to device 'pci_link' bus: 'acpi': really_probe: bound device PNP0C0F:00 to driver pci_link pci_link PNP0C0F:00: __pm_runtime_idle()! pci_link PNP0C0F:00: __pm_runtime_idle() returns -11! bus: 'acpi': driver_probe_device: matched device PNP0C0F:01 with driver pci_link bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:01 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15) driver: 'PNP0C0F:01': driver_bound: bound to device 'pci_link' bus: 'acpi': really_probe: bound device PNP0C0F:01 to driver pci_link pci_link PNP0C0F:01: __pm_runtime_idle()! pci_link PNP0C0F:01: __pm_runtime_idle() returns -11! bus: 'acpi': driver_probe_device: matched device PNP0C0F:02 with driver pci_link bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:02 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) driver: 'PNP0C0F:02': driver_bound: bound to device 'pci_link' bus: 'acpi': really_probe: bound device PNP0C0F:02 to driver pci_link pci_link PNP0C0F:02: __pm_runtime_idle()! pci_link PNP0C0F:02: __pm_runtime_idle() returns -11! bus: 'acpi': driver_probe_device: matched device PNP0C0F:03 with driver pci_link bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:03 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. driver: 'PNP0C0F:03': driver_bound: bound to device 'pci_link' bus: 'acpi': really_probe: bound device PNP0C0F:03 to driver pci_link pci_link PNP0C0F:03: __pm_runtime_idle()! pci_link PNP0C0F:03: __pm_runtime_idle() returns -11! bus: 'acpi': driver_probe_device: matched device PNP0C0F:04 with driver pci_link bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:04 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. driver: 'PNP0C0F:04': driver_bound: bound to device 'pci_link' bus: 'acpi': really_probe: bound device PNP0C0F:04 to driver pci_link pci_link PNP0C0F:04: __pm_runtime_idle()! pci_link PNP0C0F:04: __pm_runtime_idle() returns -11! bus: 'acpi': driver_probe_device: matched device PNP0C0F:05 with driver pci_link bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:05 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. driver: 'PNP0C0F:05': driver_bound: bound to device 'pci_link' bus: 'acpi': really_probe: bound device PNP0C0F:05 to driver pci_link pci_link PNP0C0F:05: __pm_runtime_idle()! pci_link PNP0C0F:05: __pm_runtime_idle() returns -11! bus: 'acpi': driver_probe_device: matched device PNP0C0F:06 with driver pci_link bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:06 ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. driver: 'PNP0C0F:06': driver_bound: bound to device 'pci_link' bus: 'acpi': really_probe: bound device PNP0C0F:06 to driver pci_link pci_link PNP0C0F:06: __pm_runtime_idle()! pci_link PNP0C0F:06: __pm_runtime_idle() returns -11! bus: 'acpi': driver_probe_device: matched device PNP0C0F:07 with driver pci_link bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:07 ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. driver: 'PNP0C0F:07': driver_bound: bound to device 'pci_link' bus: 'acpi': really_probe: bound device PNP0C0F:07 to driver pci_link pci_link PNP0C0F:07: __pm_runtime_idle()! pci_link PNP0C0F:07: __pm_runtime_idle() returns -11! initcall acpi_pci_link_init+0x0/0x6a returned 0 after 195312 usecs calling pnp_init+0x0/0x3d @ 1 bus: 'pnp': registered initcall pnp_init+0x0/0x3d returned 0 after 3255 usecs calling misc_init+0x0/0xde @ 1 device class 'misc': registering initcall misc_init+0x0/0xde returned 0 after 3255 usecs calling vga_arb_device_init+0x0/0xb3 @ 1 device: 'vga_arbiter': device_add PM: Adding info for No Bus:vga_arbiter vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded initcall vga_arb_device_init+0x0/0xb3 returned 0 after 13020 usecs calling tifm_init+0x0/0xad @ 1 bus: 'tifm': registered device class 'tifm_adapter': registering initcall tifm_init+0x0/0xad returned 0 after 6510 usecs calling wm8400_module_init+0x0/0x5b @ 1 bus: 'i2c': add driver WM8400 i2c-core: driver [WM8400] registered initcall wm8400_module_init+0x0/0x5b returned 0 after 6510 usecs calling wm831x_i2c_init+0x0/0x60 @ 1 bus: 'i2c': add driver wm831x i2c-core: driver [wm831x] registered initcall wm831x_i2c_init+0x0/0x60 returned 0 after 6510 usecs calling twl4030_init+0x0/0x40 @ 1 bus: 'i2c': add driver twl4030 i2c-core: driver [twl4030] registered initcall twl4030_init+0x0/0x40 returned 0 after 6510 usecs calling ezx_pcap_init+0x0/0x40 @ 1 bus: 'spi': add driver ezx-pcap initcall ezx_pcap_init+0x0/0x40 returned 0 after 3255 usecs calling init_scsi+0x0/0xb8 @ 1 device class 'scsi_host': registering bus: 'scsi': registered device class 'scsi_device': registering SCSI subsystem initialized initcall init_scsi+0x0/0xb8 returned 0 after 13020 usecs calling ata_init+0x0/0x440 @ 1 libata version 3.00 loaded. initcall ata_init+0x0/0x440 returned 0 after 3255 usecs calling phy_init+0x0/0x65 @ 1 device class 'mdio_bus': registering bus: 'mdio_bus': registered bus: 'mdio_bus': add driver Generic PHY initcall phy_init+0x0/0x65 returned 0 after 9765 usecs calling usb_init+0x0/0x1e9 @ 1 bus: 'usb': registered bus: 'usb': add driver usbfs usbcore: registered new interface driver usbfs device class 'usb_device': registering bus: 'usb': add driver hub usbcore: registered new interface driver hub bus: 'usb': add driver usb usbcore: registered new device driver usb initcall usb_init+0x0/0x1e9 returned 0 after 22786 usecs calling serio_init+0x0/0xc0 @ 1 bus: 'serio': registered initcall serio_init+0x0/0xc0 returned 0 after 3255 usecs calling gameport_init+0x0/0xc0 @ 1 bus: 'gameport': registered initcall gameport_init+0x0/0xc0 returned 0 after 3255 usecs calling input_init+0x0/0x173 @ 1 device class 'input': registering initcall input_init+0x0/0x173 returned 0 after 3255 usecs calling rtc_init+0x0/0x87 @ 1 device class 'rtc': registering initcall rtc_init+0x0/0x87 returned 0 after 3255 usecs calling init_dvbdev+0x0/0x100 @ 1 device class 'dvb': registering initcall init_dvbdev+0x0/0x100 returned 0 after 3255 usecs calling power_supply_class_init+0x0/0x60 @ 1 device class 'power_supply': registering initcall power_supply_class_init+0x0/0x60 returned 0 after 3255 usecs calling hwmon_init+0x0/0x145 @ 1 device class 'hwmon': registering initcall hwmon_init+0x0/0x145 returned 0 after 3255 usecs calling thermal_init+0x0/0x83 @ 1 device class 'thermal': registering initcall thermal_init+0x0/0x83 returned 0 after 3255 usecs calling mmc_init+0x0/0xa0 @ 1 bus: 'mmc': registered device class 'mmc_host': registering bus: 'sdio': registered initcall mmc_init+0x0/0xa0 returned 0 after 6510 usecs calling leds_init+0x0/0x70 @ 1 device class 'leds': registering initcall leds_init+0x0/0x70 returned 0 after 3255 usecs calling pci_subsys_init+0x0/0x170 @ 1 PCI: Using ACPI for IRQ routing initcall pci_subsys_init+0x0/0x170 returned 0 after 3255 usecs calling proto_init+0x0/0x3b @ 1 initcall proto_init+0x0/0x3b returned 0 after 0 usecs calling net_dev_init+0x0/0x19f @ 1 device class 'net': registering device: 'lo': device_add PM: Adding info for No Bus:lo initcall net_dev_init+0x0/0x19f returned 0 after 9765 usecs calling neigh_init+0x0/0x9d @ 1 initcall neigh_init+0x0/0x9d returned 0 after 0 usecs calling fib_rules_init+0x0/0xd8 @ 1 initcall fib_rules_init+0x0/0xd8 returned 0 after 0 usecs calling pktsched_init+0x0/0x100 @ 1 initcall pktsched_init+0x0/0x100 returned 0 after 0 usecs calling tc_filter_init+0x0/0x80 @ 1 initcall tc_filter_init+0x0/0x80 returned 0 after 0 usecs calling tc_action_init+0x0/0x80 @ 1 initcall tc_action_init+0x0/0x80 returned 0 after 0 usecs calling genl_init+0x0/0xc3 @ 1 initcall genl_init+0x0/0xc3 returned 0 after 0 usecs calling cipso_v4_init+0x0/0xac @ 1 initcall cipso_v4_init+0x0/0xac returned 0 after 0 usecs calling wanrouter_init+0x0/0x7d @ 1 Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc. initcall wanrouter_init+0x0/0x7d returned 0 after 3255 usecs calling irda_init+0x0/0x100 @ 1 irda_init() NET: Registered protocol family 23 initcall irda_init+0x0/0x100 returned 0 after 3255 usecs calling atm_init+0x0/0xe0 @ 1 NET: Registered protocol family 8 NET: Registered protocol family 20 device class 'atm': registering initcall atm_init+0x0/0xe0 returned 0 after 9765 usecs calling netlbl_init+0x0/0xb5 @ 1 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default initcall netlbl_init+0x0/0xb5 returned 0 after 13020 usecs calling rfkill_init+0x0/0xa5 @ 1 device class 'rfkill': registering device: 'rfkill': device_add PM: Adding info for No Bus:rfkill initcall rfkill_init+0x0/0xa5 returned 0 after 9765 usecs calling wpan_phy_class_init+0x0/0x45 @ 1 device class 'ieee802154': registering initcall wpan_phy_class_init+0x0/0x45 returned 0 after 3255 usecs calling sysctl_init+0x0/0x6f @ 1 initcall sysctl_init+0x0/0x6f returned 0 after 0 usecs calling pci_iommu_init+0x0/0x58 @ 1 bus: 'pci': add driver agpgart-amd64 bus: 'pci': driver_probe_device: matched device 0000:00:00.0 with driver agpgart-amd64 bus: 'pci': really_probe: probing driver agpgart-amd64 with device 0000:00:00.0 agpgart-amd64 0000:00:00.0: AGP bridge [1106/3188] device: 'agpgart': device_add PM: Adding info for No Bus:agpgart agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 driver: '0000:00:00.0': driver_bound: bound to device 'agpgart-amd64' bus: 'pci': really_probe: bound device 0000:00:00.0 to driver agpgart-amd64 agpgart-amd64 0000:00:00.0: __pm_runtime_idle()! agpgart-amd64 0000:00:00.0: __pm_runtime_idle() returns -11! initcall pci_iommu_init+0x0/0x58 returned 0 after 35807 usecs calling print_all_ICs+0x0/0x5a0 @ 1 printing PIC contents ... PIC IMR: ffff ... PIC IRR: 0001 ... PIC ISR: 0000 ... PIC ELCR: 0e20 printing local APIC contents on CPU#0/0: ... APIC ID: 00000000 (0) ... APIC VERSION: 00040010 ... APIC TASKPRI: 00000000 (00) ... APIC ARBPRI: 000000e0 (e0) ... APIC PROCPRI: 00000000 ... APIC LDR: 01000000 ... APIC DFR: ffffffff ... APIC SPIV: 000001ff ... APIC ISR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC TMR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC IRR field: 0000000000000000000000000000000000000000000000000000000000008000 ... APIC ESR: 00000000 ... APIC ICR: 00000000 ... APIC ICR2: 00000000 ... APIC LVTT: 000200ef ... APIC LVTPC: 00000400 ... APIC LVT0: 00010700 ... APIC LVT1: 00000400 ... APIC LVTERR: 000000fe ... APIC TMICT: 0000a2f4 ... APIC TMCCT: 000046b0 ... APIC TDCR: 00000003 number of MP IRQ sources: 15. number of IO-APIC #1 registers: 24. testing the IO APIC....................... IO APIC #1...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178003 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0003 .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 000 1 0 0 0 0 0 0 00 01 001 0 0 0 0 0 1 1 31 02 001 0 0 0 0 0 1 1 30 03 001 0 0 0 0 0 1 1 33 04 001 0 0 0 0 0 1 1 34 05 001 0 0 0 0 0 1 1 35 06 001 0 0 0 0 0 1 1 36 07 001 0 0 0 0 0 1 1 37 08 001 0 0 0 0 0 1 1 38 09 001 0 1 0 1 0 1 1 39 0a 001 0 0 0 0 0 1 1 3A 0b 001 0 0 0 0 0 1 1 3B 0c 001 0 0 0 0 0 1 1 3C 0d 001 0 0 0 0 0 1 1 3D 0e 001 0 0 0 0 0 1 1 3E 0f 001 0 0 0 0 0 1 1 3F 10 000 1 0 0 0 0 0 0 00 11 000 1 0 0 0 0 0 0 00 12 000 1 0 0 0 0 0 0 00 13 000 1 0 0 0 0 0 0 00 14 000 1 0 0 0 0 0 0 00 15 000 1 0 0 0 0 0 0 00 16 000 1 0 0 0 0 0 0 00 17 000 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. initcall print_all_ICs+0x0/0x5a0 returned 0 after 175780 usecs calling hpet_late_init+0x0/0x238 @ 1 initcall hpet_late_init+0x0/0x238 returned -19 after 0 usecs calling clocksource_done_booting+0x0/0x65 @ 1 Switching to clocksource jiffies initcall clocksource_done_booting+0x0/0x65 returned 0 after 3255 usecs calling init_pipe_fs+0x0/0x74 @ 1 initcall init_pipe_fs+0x0/0x74 returned 0 after 0 usecs calling eventpoll_init+0x0/0x120 @ 1 initcall eventpoll_init+0x0/0x120 returned 0 after 0 usecs calling anon_inode_init+0x0/0x166 @ 1 initcall anon_inode_init+0x0/0x166 returned 0 after 0 usecs calling tomoyo_initerface_init+0x0/0x185 @ 1 initcall tomoyo_initerface_init+0x0/0x185 returned 0 after 0 usecs calling blk_scsi_ioctl_init+0x0/0x2ae @ 1 initcall blk_scsi_ioctl_init+0x0/0x2ae returned 0 after 0 usecs calling acpi_event_init+0x0/0xa7 @ 1 initcall acpi_event_init+0x0/0xa7 returned 0 after 0 usecs calling pnpacpi_init+0x0/0xb5 @ 1 pnp: PnP ACPI init device: 'pnp0': device_add PM: Adding info for No Bus:pnp0 ACPI: bus type pnp registered device: '00:00': device_add bus: 'pnp': add device 00:00 PM: Adding info for pnp:00:00 pnp 00:00: __pm_runtime_idle()! pnp 00:00: __pm_runtime_idle() returns -11! device: '00:01': device_add bus: 'pnp': add device 00:01 PM: Adding info for pnp:00:01 pnp 00:01: __pm_runtime_idle()! pnp 00:01: __pm_runtime_idle() returns -11! IOAPIC[0]: Set routing entry (1-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) device: '00:02': device_add bus: 'pnp': add device 00:02 PM: Adding info for pnp:00:02 pnp 00:02: __pm_runtime_idle()! pnp 00:02: __pm_runtime_idle() returns -11! device: '00:03': device_add bus: 'pnp': add device 00:03 PM: Adding info for pnp:00:03 pnp 00:03: __pm_runtime_idle()! pnp 00:03: __pm_runtime_idle() returns -11! IOAPIC[0]: Set routing entry (1-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) device: '00:04': device_add bus: 'pnp': add device 00:04 PM: Adding info for pnp:00:04 pnp 00:04: __pm_runtime_idle()! pnp 00:04: __pm_runtime_idle() returns -11! IOAPIC[0]: Set routing entry (1-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) device: '00:05': device_add bus: 'pnp': add device 00:05 PM: Adding info for pnp:00:05 pnp 00:05: __pm_runtime_idle()! pnp 00:05: __pm_runtime_idle() returns -11! IOAPIC[0]: Set routing entry (1-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) device: '00:06': device_add bus: 'pnp': add device 00:06 PM: Adding info for pnp:00:06 pnp 00:06: __pm_runtime_idle()! pnp 00:06: __pm_runtime_idle() returns -11! pnp 00:07: io resource (0x10-0x1f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:07: io resource (0x22-0x3f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:07: io resource (0x44-0x5f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:07: io resource (0x62-0x63) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:07: io resource (0x65-0x6f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:07: io resource (0x72-0x7f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:07: io resource (0x80-0x80) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:07: io resource (0x84-0x86) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:07: io resource (0x88-0x88) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:07: io resource (0x8c-0x8e) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:07: io resource (0x90-0x9f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:07: io resource (0xa2-0xbf) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:07: io resource (0xe0-0xef) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling device: '00:07': device_add bus: 'pnp': add device 00:07 PM: Adding info for pnp:00:07 pnp 00:07: __pm_runtime_idle()! pnp 00:07: __pm_runtime_idle() returns -11! device: '00:08': device_add bus: 'pnp': add device 00:08 PM: Adding info for pnp:00:08 pnp 00:08: __pm_runtime_idle()! pnp 00:08: __pm_runtime_idle() returns -11! IOAPIC[0]: Set routing entry (1-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) device: '00:09': device_add bus: 'pnp': add device 00:09 PM: Adding info for pnp:00:09 pnp 00:09: __pm_runtime_idle()! pnp 00:09: __pm_runtime_idle() returns -11! IOAPIC[0]: Set routing entry (1-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) device: '00:0a': device_add bus: 'pnp': add device 00:0a PM: Adding info for pnp:00:0a pnp 00:0a: __pm_runtime_idle()! pnp 00:0a: __pm_runtime_idle() returns -11! device: '00:0b': device_add bus: 'pnp': add device 00:0b PM: Adding info for pnp:00:0b pnp 00:0b: __pm_runtime_idle()! pnp 00:0b: __pm_runtime_idle() returns -11! pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered initcall pnpacpi_init+0x0/0xb5 returned 0 after 296223 usecs calling pnp_system_init+0x0/0x40 @ 1 bus: 'pnp': add driver system bus: 'pnp': driver_probe_device: matched device 00:07 with driver system bus: 'pnp': really_probe: probing driver system with device 00:07 system 00:07: ioport range 0x295-0x296 has been reserved system 00:07: ioport range 0x3e1-0x3e7 has been reserved system 00:07: ioport range 0x4d0-0x4d1 has been reserved system 00:07: ioport range 0x800-0x87f has been reserved system 00:07: ioport range 0x400-0x41f has been reserved driver: '00:07': driver_bound: bound to device 'system' bus: 'pnp': really_probe: bound device 00:07 to driver system system 00:07: __pm_runtime_idle()! system 00:07: __pm_runtime_idle() returns -11! bus: 'pnp': driver_probe_device: matched device 00:08 with driver system bus: 'pnp': really_probe: probing driver system with device 00:08 system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved system 00:08: iomem range 0xfff80000-0xffffffff has been reserved driver: '00:08': driver_bound: bound to device 'system' bus: 'pnp': really_probe: bound device 00:08 to driver system system 00:08: __pm_runtime_idle()! system 00:08: __pm_runtime_idle() returns -11! bus: 'pnp': driver_probe_device: matched device 00:0b with driver system bus: 'pnp': really_probe: probing driver system with device 00:0b system 00:0b: iomem range 0x0-0x9ffff could not be reserved system 00:0b: iomem range 0xc0000-0xdffff has been reserved system 00:0b: iomem range 0xe0000-0xfffff could not be reserved system 00:0b: iomem range 0x100000-0x3ffeffff could not be reserved driver: '00:0b': driver_bound: bound to device 'system' bus: 'pnp': really_probe: bound device 00:0b to driver system system 00:0b: __pm_runtime_idle()! system 00:0b: __pm_runtime_idle() returns -11! initcall pnp_system_init+0x0/0x40 returned 0 after 91145 usecs calling chr_dev_init+0x0/0x100 @ 1 device class 'mem': registering device: 'mem': device_add PM: Adding info for No Bus:mem device: 'null': device_add PM: Adding info for No Bus:null device: 'port': device_add PM: Adding info for No Bus:port device: 'zero': device_add PM: Adding info for No Bus:zero device: 'full': device_add PM: Adding info for No Bus:full device: 'random': device_add PM: Adding info for No Bus:random device: 'urandom': device_add PM: Adding info for No Bus:urandom device: 'kmsg': device_add PM: Adding info for No Bus:kmsg device: 'oldmem': device_add PM: Adding info for No Bus:oldmem initcall chr_dev_init+0x0/0x100 returned 0 after 58593 usecs calling firmware_class_init+0x0/0xa3 @ 1 device class 'firmware': registering initcall firmware_class_init+0x0/0xa3 returned 0 after 6510 usecs calling ieee1394_init+0x0/0x2c4 @ 1 bus: 'ieee1394': registered device class 'ieee1394_host': registering device class 'ieee1394_protocol': registering device class 'ieee1394_node': registering device class 'ieee1394': registering bus: 'ieee1394': add driver nodemgr initcall ieee1394_init+0x0/0x2c4 returned 0 after 22786 usecs calling init_acpi_pm_clocksource+0x0/0x12f @ 1 Switching to clocksource acpi_pm initcall init_acpi_pm_clocksource+0x0/0x12f returned 0 after 6512 usecs Switched to high resolution mode on CPU 0 calling ssb_modinit+0x0/0x8c @ 1 bus: 'ssb': registered initcall ssb_modinit+0x0/0x8c returned 0 after 2535 usecs calling pcibios_assign_resources+0x0/0x9c @ 1 pci 0000:00:11.6: BAR 0: got res [0x1000-0x10ff] bus [0x1000-0x10ff] flags 0x20101 pci 0000:00:11.6: BAR 0: moved to bus [0x1000-0x10ff] flags 0x20101 pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xa000-0xafff pci 0000:00:01.0: MEM window: 0xfd300000-0xfd8fffff pci 0000:00:01.0: PREFETCH window: 0xd7b00000-0xf7afffff pci 0000:00:01.0: calling quirk_via_vlink+0x0/0x120 pci 0000:00:01.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0xa000-0xafff] pci_bus 0000:01: resource 1 mem: [0xfd300000-0xfd8fffff] pci_bus 0000:01: resource 2 pref mem [0xd7b00000-0xf7afffff] initcall pcibios_assign_resources+0x0/0x9c returned 0 after 65097 usecs calling sysctl_core_init+0x0/0x65 @ 1 initcall sysctl_core_init+0x0/0x65 returned 0 after 40 usecs calling inet_init+0x0/0x2cc @ 1 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 32768 (order: 9, 2359296 bytes) TCP: Hash tables configured (established 131072 bind 32768) TCP reno registered initcall inet_init+0x0/0x2cc returned 0 after 34272 usecs calling af_unix_init+0x0/0x82 @ 1 NET: Registered protocol family 1 initcall af_unix_init+0x0/0x82 returned 0 after 3092 usecs calling populate_rootfs+0x0/0x14b @ 1 initcall populate_rootfs+0x0/0x14b returned 0 after 824 usecs calling calgary_fixup_tce_spaces+0x0/0x129 @ 1 initcall calgary_fixup_tce_spaces+0x0/0x129 returned -19 after 1 usecs calling i8259A_init_sysfs+0x0/0x50 @ 1 Registering sysdev class 'i8259' Registering sys device of class 'i8259' Registering sys device 'i82590' initcall i8259A_init_sysfs+0x0/0x50 returned 0 after 10452 usecs calling vsyscall_init+0x0/0xcf @ 1 initcall vsyscall_init+0x0/0xcf returned 0 after 10 usecs calling sbf_init+0x0/0x140 @ 1 initcall sbf_init+0x0/0x140 returned 0 after 0 usecs calling i8237A_init_sysfs+0x0/0x50 @ 1 Registering sysdev class 'i8237' Registering sys device of class 'i8237' Registering sys device 'i82370' initcall i8237A_init_sysfs+0x0/0x50 returned 0 after 10225 usecs calling add_rtc_cmos+0x0/0xfe @ 1 initcall add_rtc_cmos+0x0/0xfe returned 0 after 2 usecs calling cache_sysfs_init+0x0/0x245 @ 1 initcall cache_sysfs_init+0x0/0x245 returned 0 after 1696 usecs calling mce_init_device+0x0/0x26c @ 1 Registering sysdev class 'machinecheck' Registering sys device of class 'machinecheck' Registering sys device 'machinecheck0' device: 'mcelog': device_add PM: Adding info for No Bus:mcelog initcall mce_init_device+0x0/0x26c returned 0 after 18496 usecs calling thermal_throttle_init_device+0x0/0x70 @ 1 initcall thermal_throttle_init_device+0x0/0x70 returned 0 after 0 usecs calling msr_init+0x0/0x108 @ 1 device class 'msr': registering device: 'msr0': device_add PM: Adding info for No Bus:msr0 initcall msr_init+0x0/0x108 returned 0 after 9152 usecs calling cpuid_init+0x0/0x10f @ 1 device class 'cpuid': registering device: 'cpu0': device_add PM: Adding info for No Bus:cpu0 initcall cpuid_init+0x0/0x10f returned 0 after 9323 usecs calling ioapic_init_sysfs+0x0/0xf3 @ 1 Registering sysdev class 'ioapic' Registering sys device of class 'ioapic' Registering sys device 'ioapic0' initcall ioapic_init_sysfs+0x0/0xf3 returned 0 after 10416 usecs calling add_pcspkr+0x0/0x5c @ 1 Registering platform device 'pcspkr'. Parent at platform device: 'pcspkr': device_add bus: 'platform': add device pcspkr PM: Adding info for platform:pcspkr platform pcspkr: __pm_runtime_idle()! platform pcspkr: __pm_runtime_idle() returns -11! initcall add_pcspkr+0x0/0x5c returned 0 after 22224 usecs calling microcode_init+0x0/0x141 @ 1 microcode: no support for this CPU vendor initcall microcode_init+0x0/0x141 returned -19 after 3706 usecs calling start_periodic_check_for_corruption+0x0/0x70 @ 1 Scanning for low memory corruption every 60 seconds initcall start_periodic_check_for_corruption+0x0/0x70 returned 0 after 4554 usecs calling audit_classes_init+0x0/0xe0 @ 1 initcall audit_classes_init+0x0/0xe0 returned 0 after 58 usecs calling start_pageattr_test+0x0/0x80 @ 1 initcall start_pageattr_test+0x0/0x80 returned 0 after 171 usecs calling pt_dump_init+0x0/0x60 @ 1 initcall pt_dump_init+0x0/0x60 returned 0 after 27 usecs calling crypto_fpu_module_init+0x0/0x40 @ 1 initcall crypto_fpu_module_init+0x0/0x40 returned 0 after 67 usecs calling aes_init+0x0/0x40 @ 1 initcall aes_init+0x0/0x40 returned 0 after 331 usecs calling init+0x0/0x3d @ 1 initcall init+0x0/0x3d returned 0 after 336 usecs calling aesni_init+0x0/0x173 @ 1 Intel AES-NI instructions are not detected. initcall aesni_init+0x0/0x173 returned -19 after 3874 usecs calling init_vdso_vars+0x0/0x268 @ 1 initcall init_vdso_vars+0x0/0x268 returned 0 after 31 usecs calling ia32_binfmt_init+0x0/0x3c @ 1 initcall ia32_binfmt_init+0x0/0x3c returned 0 after 10 usecs calling sysenter_setup+0x0/0x3a3 @ 1 initcall sysenter_setup+0x0/0x3a3 returned 0 after 5 usecs calling init_aout_binfmt+0x0/0x40 @ 1 initcall init_aout_binfmt+0x0/0x40 returned 0 after 1 usecs calling init_sched_debug_procfs+0x0/0x53 @ 1 initcall init_sched_debug_procfs+0x0/0x53 returned 0 after 31 usecs calling proc_schedstat_init+0x0/0x50 @ 1 initcall proc_schedstat_init+0x0/0x50 returned 0 after 22 usecs calling proc_execdomains_init+0x0/0x50 @ 1 initcall proc_execdomains_init+0x0/0x50 returned 0 after 21 usecs calling ioresources_init+0x0/0x65 @ 1 initcall ioresources_init+0x0/0x65 returned 0 after 40 usecs calling uid_cache_init+0x0/0xb5 @ 1 initcall uid_cache_init+0x0/0xb5 returned 0 after 24 usecs calling init_posix_timers+0x0/0x1bd @ 1 initcall init_posix_timers+0x0/0x1bd returned 0 after 13 usecs calling init_posix_cpu_timers+0x0/0x113 @ 1 initcall init_posix_cpu_timers+0x0/0x113 returned 0 after 1 usecs calling nsproxy_cache_init+0x0/0x5b @ 1 initcall nsproxy_cache_init+0x0/0x5b returned 0 after 11 usecs calling create_proc_profile+0x0/0x80 @ 1 initcall create_proc_profile+0x0/0x80 returned 0 after 0 usecs calling timekeeping_init_device+0x0/0x4d @ 1 Registering sysdev class 'timekeeping' Registering sys device of class 'timekeeping' Registering sys device 'timekeeping0' initcall timekeeping_init_device+0x0/0x4d returned 0 after 11639 usecs calling init_clocksource_sysfs+0x0/0x7d @ 1 Registering sysdev class 'clocksource' Registering sys device of class 'clocksource' Registering sys device 'clocksource0' initcall init_clocksource_sysfs+0x0/0x7d returned 0 after 11659 usecs calling init_timer_list_procfs+0x0/0x5b @ 1 initcall init_timer_list_procfs+0x0/0x5b returned 0 after 24 usecs calling init_tstats_procfs+0x0/0x53 @ 1 initcall init_tstats_procfs+0x0/0x53 returned 0 after 22 usecs calling lockdep_proc_init+0x0/0xa5 @ 1 initcall lockdep_proc_init+0x0/0xa5 returned 0 after 84 usecs calling futex_init+0x0/0xfb @ 1 initcall futex_init+0x0/0xfb returned 0 after 39 usecs calling init_rttest+0x0/0x1a0 @ 1 Registering sysdev class 'rttest' Registering sys device of class 'rttest' Registering sys device 'rttest0' Registering sys device of class 'rttest' Registering sys device 'rttest1' Registering sys device of class 'rttest' Registering sys device 'rttest2' Registering sys device of class 'rttest' Registering sys device 'rttest3' Registering sys device of class 'rttest' Registering sys device 'rttest4' Registering sys device of class 'rttest' Registering sys device 'rttest5' Registering sys device of class 'rttest' Registering sys device 'rttest6' Registering sys device of class 'rttest' Registering sys device 'rttest7' Initializing RT-Tester: OK initcall init_rttest+0x0/0x1a0 returned 0 after 63140 usecs calling proc_dma_init+0x0/0x50 @ 1 initcall proc_dma_init+0x0/0x50 returned 0 after 24 usecs calling kallsyms_init+0x0/0x50 @ 1 initcall kallsyms_init+0x0/0x50 returned 0 after 25 usecs calling snapshot_device_init+0x0/0x40 @ 1 device: 'snapshot': device_add PM: Adding info for No Bus:snapshot initcall snapshot_device_init+0x0/0x40 returned 0 after 6462 usecs calling crash_save_vmcoreinfo_init+0x0/0x4d2 @ 1 initcall crash_save_vmcoreinfo_init+0x0/0x4d2 returned 0 after 21 usecs calling crash_notes_memory_init+0x0/0x63 @ 1 initcall crash_notes_memory_init+0x0/0x63 returned 0 after 7 usecs calling pid_namespaces_init+0x0/0x54 @ 1 initcall pid_namespaces_init+0x0/0x54 returned 0 after 13 usecs calling ikconfig_init+0x0/0x60 @ 1 initcall ikconfig_init+0x0/0x60 returned 0 after 22 usecs calling audit_init+0x0/0x191 @ 1 audit: initializing netlink socket (disabled) type=2000 audit(1254304040.465:1): initialized initcall audit_init+0x0/0x191 returned 0 after 8293 usecs calling audit_tree_init+0x0/0x77 @ 1 initcall audit_tree_init+0x0/0x77 returned 0 after 9 usecs calling rcu_torture_init+0x0/0x6c0 @ 1 rcu-torture:--- Start of test: nreaders=2 nfakewriters=4 stat_interval=0 verbose=0 test_no_idle_hz=0 shuffle_interval=3 stutter=5 irqreader=1 initcall rcu_torture_init+0x0/0x6c0 returned 0 after 13069 usecs calling utsname_sysctl_init+0x0/0x40 @ 1 initcall utsname_sysctl_init+0x0/0x40 returned 0 after 11 usecs calling init_lstats_procfs+0x0/0x4d @ 1 initcall init_lstats_procfs+0x0/0x4d returned 0 after 23 usecs calling perf_event_sysfs_init+0x0/0x45 @ 1 initcall perf_event_sysfs_init+0x0/0x45 returned 0 after 36 usecs calling init_per_zone_wmark_min+0x0/0x9c @ 1 initcall init_per_zone_wmark_min+0x0/0x9c returned 0 after 31 usecs calling kswapd_init+0x0/0x45 @ 1 initcall kswapd_init+0x0/0x45 returned 0 after 2157 usecs calling setup_vmstat+0x0/0xa5 @ 1 initcall setup_vmstat+0x0/0xa5 returned 0 after 85 usecs calling mm_sysfs_init+0x0/0x50 @ 1 initcall mm_sysfs_init+0x0/0x50 returned 0 after 37 usecs calling proc_vmalloc_init+0x0/0x50 @ 1 initcall proc_vmalloc_init+0x0/0x50 returned 0 after 22 usecs calling procswaps_init+0x0/0x53 @ 1 initcall procswaps_init+0x0/0x53 returned 0 after 21 usecs calling ksm_init+0x0/0x180 @ 1 initcall ksm_init+0x0/0x180 returned 0 after 250 usecs calling slab_proc_init+0x0/0x50 @ 1 initcall slab_proc_init+0x0/0x50 returned 0 after 24 usecs calling slab_sysfs_init+0x0/0x123 @ 1 initcall slab_sysfs_init+0x0/0x123 returned 0 after 85301 usecs calling pfn_inject_init+0x0/0xa0 @ 1 initcall pfn_inject_init+0x0/0xa0 returned 0 after 48 usecs calling kmemleak_test_init+0x0/0x2ce @ 1 Kmemleak testing kmemleak: kmalloc(32) = ffff88003ebb89c0 kmemleak: kmalloc(32) = ffff88003ebb8a28 kmemleak: kmalloc(1024) = ffff88003f25ef50 kmemleak: kmalloc(1024) = ffff88003f25f398 kmemleak: kmalloc(2048) = ffff88003f2739f8 kmemleak: kmalloc(2048) = ffff88003f274240 kmemleak: kmalloc(4096) = ffff88003eb51048 kmemleak: kmalloc(4096) = ffff88003eb52090 kmemleak: kmem_cache_alloc(files_cachep) = ffff88003fab6300 kmemleak: kmem_cache_alloc(files_cachep) = ffff88003fab6900 kmemleak: vmalloc(64) = ffffc90000020000 kmemleak: vmalloc(64) = ffffc90000023000 kmemleak: vmalloc(64) = ffffc90000026000 kmemleak: vmalloc(64) = ffffc90000029000 kmemleak: vmalloc(64) = ffffc9000002c000 kmemleak: kmalloc(sizeof(*elem)) = ffff88003eb59918 kmemleak: kmalloc(sizeof(*elem)) = ffff88003eb59b60 kmemleak: kmalloc(sizeof(*elem)) = ffff88003eb59da8 kmemleak: kmalloc(sizeof(*elem)) = ffff88003ee14000 kmemleak: kmalloc(sizeof(*elem)) = ffff88003ee14248 kmemleak: kmalloc(sizeof(*elem)) = ffff88003ee14490 kmemleak: kmalloc(sizeof(*elem)) = ffff88003ee146d8 kmemleak: kmalloc(sizeof(*elem)) = ffff88003ee14920 kmemleak: kmalloc(sizeof(*elem)) = ffff88003ee14b68 kmemleak: kmalloc(sizeof(*elem)) = ffff88003ee14db0 kmemleak: kmalloc(129) = ffff88003f223318 initcall kmemleak_test_init+0x0/0x2ce returned 0 after 109704 usecs calling fasync_init+0x0/0x57 @ 1 initcall fasync_init+0x0/0x57 returned 0 after 1089 usecs calling proc_filesystems_init+0x0/0x4d @ 1 initcall proc_filesystems_init+0x0/0x4d returned 0 after 31 usecs calling inotify_setup+0x0/0x37 @ 1 initcall inotify_setup+0x0/0x37 returned 0 after 0 usecs calling inotify_user_setup+0x0/0xed @ 1 initcall inotify_user_setup+0x0/0xed returned 0 after 1728 usecs calling aio_setup+0x0/0xd0 @ 1 initcall aio_setup+0x0/0xd0 returned 0 after 1821 usecs calling proc_locks_init+0x0/0x4d @ 1 initcall proc_locks_init+0x0/0x4d returned 0 after 25 usecs calling init_sys32_ioctl+0x0/0xb5 @ 1 initcall init_sys32_ioctl+0x0/0xb5 returned 0 after 16 usecs calling init_mbcache+0x0/0x40 @ 1 initcall init_mbcache+0x0/0x40 returned 0 after 3 usecs calling dquot_init+0x0/0x140 @ 1 VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) initcall dquot_init+0x0/0x140 returned 0 after 8607 usecs calling init_v1_quota_format+0x0/0x40 @ 1 initcall init_v1_quota_format+0x0/0x40 returned 0 after 20 usecs calling proc_cmdline_init+0x0/0x50 @ 1 initcall proc_cmdline_init+0x0/0x50 returned 0 after 25 usecs calling proc_cpuinfo_init+0x0/0x50 @ 1 initcall proc_cpuinfo_init+0x0/0x50 returned 0 after 22 usecs calling proc_devices_init+0x0/0x50 @ 1 initcall proc_devices_init+0x0/0x50 returned 0 after 22 usecs calling proc_interrupts_init+0x0/0x50 @ 1 initcall proc_interrupts_init+0x0/0x50 returned 0 after 22 usecs calling proc_loadavg_init+0x0/0x50 @ 1 initcall proc_loadavg_init+0x0/0x50 returned 0 after 23 usecs calling proc_meminfo_init+0x0/0x50 @ 1 initcall proc_meminfo_init+0x0/0x50 returned 0 after 22 usecs calling proc_stat_init+0x0/0x50 @ 1 initcall proc_stat_init+0x0/0x50 returned 0 after 23 usecs calling proc_uptime_init+0x0/0x50 @ 1 initcall proc_uptime_init+0x0/0x50 returned 0 after 27 usecs calling proc_version_init+0x0/0x50 @ 1 initcall proc_version_init+0x0/0x50 returned 0 after 22 usecs calling proc_softirqs_init+0x0/0x4d @ 1 initcall proc_softirqs_init+0x0/0x4d returned 0 after 22 usecs calling proc_kcore_init+0x0/0xc0 @ 1 initcall proc_kcore_init+0x0/0xc0 returned 0 after 65 usecs calling proc_kmsg_init+0x0/0x50 @ 1 initcall proc_kmsg_init+0x0/0x50 returned 0 after 27 usecs calling proc_page_init+0x0/0x70 @ 1 initcall proc_page_init+0x0/0x70 returned 0 after 43 usecs calling configfs_init+0x0/0xf9 @ 1 initcall configfs_init+0x0/0xf9 returned 0 after 813 usecs calling init_devpts_fs+0x0/0x7a @ 1 initcall init_devpts_fs+0x0/0x7a returned 0 after 254 usecs calling init_dlm+0x0/0xd6 @ 1 device: 'dlm-control': device_add PM: Adding info for No Bus:dlm-control device: 'dlm-monitor': device_add PM: Adding info for No Bus:dlm-monitor device: 'dlm_plock': device_add PM: Adding info for No Bus:dlm_plock DLM (built Sep 30 2009 11:54:39) installed initcall init_dlm+0x0/0xd6 returned 0 after 26082 usecs calling init_reiserfs_fs+0x0/0xb8 @ 1 initcall init_reiserfs_fs+0x0/0xb8 returned 0 after 817 usecs calling init_ext3_fs+0x0/0x95 @ 1 initcall init_ext3_fs+0x0/0x95 returned 0 after 1679 usecs calling init_ext2_fs+0x0/0x95 @ 1 initcall init_ext2_fs+0x0/0x95 returned 0 after 1724 usecs calling journal_init+0x0/0xd3 @ 1 initcall journal_init+0x0/0xd3 returned 0 after 3139 usecs calling journal_init+0x0/0xe3 @ 1 initcall journal_init+0x0/0xe3 returned 0 after 3684 usecs calling init_ramfs_fs+0x0/0x3d @ 1 initcall init_ramfs_fs+0x0/0x3d returned 0 after 3 usecs calling init_nls_cp775+0x0/0x40 @ 1 initcall init_nls_cp775+0x0/0x40 returned 0 after 31 usecs calling init_nls_cp850+0x0/0x40 @ 1 initcall init_nls_cp850+0x0/0x40 returned 0 after 1 usecs calling init_nls_cp852+0x0/0x40 @ 1 initcall init_nls_cp852+0x0/0x40 returned 0 after 1 usecs calling init_nls_cp855+0x0/0x40 @ 1 initcall init_nls_cp855+0x0/0x40 returned 0 after 1 usecs calling init_nls_cp862+0x0/0x40 @ 1 initcall init_nls_cp862+0x0/0x40 returned 0 after 1 usecs calling init_nls_cp863+0x0/0x40 @ 1 initcall init_nls_cp863+0x0/0x40 returned 0 after 1 usecs calling init_nls_cp864+0x0/0x40 @ 1 initcall init_nls_cp864+0x0/0x40 returned 0 after 1 usecs calling init_nls_cp865+0x0/0x40 @ 1 initcall init_nls_cp865+0x0/0x40 returned 0 after 1 usecs calling init_nls_cp869+0x0/0x40 @ 1 initcall init_nls_cp869+0x0/0x40 returned 0 after 1 usecs calling init_nls_cp874+0x0/0x40 @ 1 initcall init_nls_cp874+0x0/0x40 returned 0 after 1 usecs calling init_nls_cp932+0x0/0x40 @ 1 initcall init_nls_cp932+0x0/0x40 returned 0 after 1 usecs calling init_nls_euc_jp+0x0/0x80 @ 1 initcall init_nls_euc_jp+0x0/0x80 returned 0 after 1 usecs calling init_nls_cp936+0x0/0x40 @ 1 initcall init_nls_cp936+0x0/0x40 returned 0 after 1 usecs calling init_nls_cp949+0x0/0x40 @ 1 initcall init_nls_cp949+0x0/0x40 returned 0 after 1 usecs calling init_nls_cp950+0x0/0x40 @ 1 initcall init_nls_cp950+0x0/0x40 returned 0 after 1 usecs calling init_nls_cp1251+0x0/0x40 @ 1 initcall init_nls_cp1251+0x0/0x40 returned 0 after 1 usecs calling init_nls_ascii+0x0/0x40 @ 1 initcall init_nls_ascii+0x0/0x40 returned 0 after 1 usecs calling init_nls_iso8859_1+0x0/0x40 @ 1 initcall init_nls_iso8859_1+0x0/0x40 returned 0 after 1 usecs calling init_nls_iso8859_3+0x0/0x40 @ 1 initcall init_nls_iso8859_3+0x0/0x40 returned 0 after 1 usecs calling init_nls_iso8859_4+0x0/0x40 @ 1 initcall init_nls_iso8859_4+0x0/0x40 returned 0 after 1 usecs calling init_nls_iso8859_5+0x0/0x40 @ 1 initcall init_nls_iso8859_5+0x0/0x40 returned 0 after 1 usecs calling init_nls_iso8859_7+0x0/0x40 @ 1 initcall init_nls_iso8859_7+0x0/0x40 returned 0 after 1 usecs calling init_nls_cp1255+0x0/0x40 @ 1 initcall init_nls_cp1255+0x0/0x40 returned 0 after 1 usecs calling init_nls_iso8859_15+0x0/0x40 @ 1 initcall init_nls_iso8859_15+0x0/0x40 returned 0 after 1 usecs calling init_nls_koi8_r+0x0/0x40 @ 1 initcall init_nls_koi8_r+0x0/0x40 returned 0 after 1 usecs calling init_nls_utf8+0x0/0x4d @ 1 initcall init_nls_utf8+0x0/0x4d returned 0 after 1 usecs calling init_ntfs_fs+0x0/0x273 @ 1 NTFS driver 2.1.29 [Flags: R/W DEBUG]. initcall init_ntfs_fs+0x0/0x273 returned 0 after 7523 usecs calling init_autofs_fs+0x0/0x3d @ 1 initcall init_autofs_fs+0x0/0x3d returned 0 after 2 usecs calling init_autofs4_fs+0x0/0x53 @ 1 initcall init_autofs4_fs+0x0/0x53 returned -16 after 1 usecs initcall init_autofs4_fs+0x0/0x53 returned with error code -16 calling fuse_init+0x0/0x190 @ 1 fuse init (API version 7.13) device: 'fuse': device_add PM: Adding info for No Bus:fuse initcall fuse_init+0x0/0x190 returned 0 after 10385 usecs calling init_udf_fs+0x0/0x93 @ 1 initcall init_udf_fs+0x0/0x93 returned 0 after 748 usecs calling init_jfs_fs+0x0/0x1ff @ 1 JFS: nTxBlock = 7776, nTxLock = 62214 initcall init_jfs_fs+0x0/0x1ff returned 0 after 12330 usecs calling init_xfs_fs+0x0/0xe3 @ 1 SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, debug enabled khelper used greatest stack depth: 4752 bytes left SGI XFS Quota Management subsystem initcall init_xfs_fs+0x0/0xe3 returned 0 after 30733 usecs calling ocfs2_init+0x0/0x367 @ 1 OCFS2 1.5.0 initcall ocfs2_init+0x0/0x367 returned 0 after 4695 usecs calling ocfs2_stack_glue_init+0x0/0xc0 @ 1 initcall ocfs2_stack_glue_init+0x0/0xc0 returned 0 after 75 usecs calling o2cb_stack_init+0x0/0x40 @ 1 ocfs2: Registered cluster interface o2cb initcall o2cb_stack_init+0x0/0x40 returned 0 after 3623 usecs calling ocfs2_user_plugin_init+0x0/0x90 @ 1 device: 'ocfs2_control': device_add PM: Adding info for No Bus:ocfs2_control ocfs2: Registered cluster interface user initcall ocfs2_user_plugin_init+0x0/0x90 returned 0 after 11075 usecs calling init_o2nm+0x0/0xe0 @ 1 OCFS2 Node Manager 1.5.0 initcall init_o2nm+0x0/0xe0 returned 0 after 8930 usecs calling dlm_init+0x0/0x29c @ 1 OCFS2 DLM 1.5.0 initcall dlm_init+0x0/0x29c returned 0 after 5014 usecs calling init_dlmfs_fs+0x0/0x114 @ 1 OCFS2 DLMFS 1.5.0 OCFS2 User DLM kernel interface loaded initcall init_dlmfs_fs+0x0/0x114 returned 0 after 6276 usecs calling init_btrfs_fs+0x0/0xdc @ 1 device: 'btrfs-control': device_add PM: Adding info for No Bus:btrfs-control Btrfs loaded initcall init_btrfs_fs+0x0/0xdc returned 0 after 14943 usecs calling init_gfs2_fs+0x0/0x230 @ 1 Slow work thread pool: Starting up Slow work thread pool: Ready GFS2 (built Sep 30 2009 11:54:51) installed initcall init_gfs2_fs+0x0/0x230 returned 0 after 15081 usecs calling ipc_init+0x0/0x4d @ 1 msgmni has been set to 1944 initcall ipc_init+0x0/0x4d returned 0 after 2625 usecs calling ipc_sysctl_init+0x0/0x3d @ 1 initcall ipc_sysctl_init+0x0/0x3d returned 0 after 13 usecs calling init_mqueue_fs+0x0/0xf3 @ 1 initcall init_mqueue_fs+0x0/0xf3 returned 0 after 1069 usecs calling key_proc_init+0x0/0x5a @ 1 initcall key_proc_init+0x0/0x5a returned 0 after 25 usecs calling crypto_wq_init+0x0/0x60 @ 1 initcall crypto_wq_init+0x0/0x60 returned 0 after 106 usecs calling crypto_algapi_init+0x0/0x40 @ 1 initcall crypto_algapi_init+0x0/0x40 returned 0 after 25 usecs calling skcipher_module_init+0x0/0x43 @ 1 initcall skcipher_module_init+0x0/0x43 returned 0 after 0 usecs calling chainiv_module_init+0x0/0x40 @ 1 initcall chainiv_module_init+0x0/0x40 returned 0 after 6 usecs calling eseqiv_module_init+0x0/0x40 @ 1 initcall eseqiv_module_init+0x0/0x40 returned 0 after 3 usecs calling seqiv_module_init+0x0/0x40 @ 1 initcall seqiv_module_init+0x0/0x40 returned 0 after 3 usecs calling hmac_module_init+0x0/0x40 @ 1 initcall hmac_module_init+0x0/0x40 returned 0 after 3 usecs calling vmac_module_init+0x0/0x3d @ 1 initcall vmac_module_init+0x0/0x3d returned 0 after 3 usecs calling crypto_null_mod_init+0x0/0xa3 @ 1 alg: No test for cipher_null (cipher_null-generic) alg: No test for ecb(cipher_null) (ecb-cipher_null) alg: No test for digest_null (digest_null-generic) alg: No test for compress_null (compress_null-generic) initcall crypto_null_mod_init+0x0/0xa3 returned 0 after 19117 usecs calling md4_mod_init+0x0/0x40 @ 1 initcall md4_mod_init+0x0/0x40 returned 0 after 214 usecs calling md5_mod_init+0x0/0x40 @ 1 initcall md5_mod_init+0x0/0x40 returned 0 after 204 usecs calling rmd128_mod_init+0x0/0x40 @ 1 initcall rmd128_mod_init+0x0/0x40 returned 0 after 208 usecs calling rmd160_mod_init+0x0/0x40 @ 1 initcall rmd160_mod_init+0x0/0x40 returned 0 after 216 usecs calling rmd256_mod_init+0x0/0x40 @ 1 initcall rmd256_mod_init+0x0/0x40 returned 0 after 213 usecs calling sha1_generic_mod_init+0x0/0x3d @ 1 initcall sha1_generic_mod_init+0x0/0x3d returned 0 after 202 usecs calling sha512_generic_mod_init+0x0/0x73 @ 1 initcall sha512_generic_mod_init+0x0/0x73 returned 0 after 412 usecs calling wp512_mod_init+0x0/0xa0 @ 1 initcall wp512_mod_init+0x0/0xa0 returned 0 after 710 usecs calling crypto_cbc_module_init+0x0/0x40 @ 1 initcall crypto_cbc_module_init+0x0/0x40 returned 0 after 3 usecs calling crypto_pcbc_module_init+0x0/0x40 @ 1 initcall crypto_pcbc_module_init+0x0/0x40 returned 0 after 3 usecs calling crypto_cts_module_init+0x0/0x40 @ 1 initcall crypto_cts_module_init+0x0/0x40 returned 0 after 3 usecs calling crypto_module_init+0x0/0x3d @ 1 initcall crypto_module_init+0x0/0x3d returned 0 after 3 usecs calling crypto_ctr_module_init+0x0/0x67 @ 1 initcall crypto_ctr_module_init+0x0/0x67 returned 0 after 5 usecs calling crypto_gcm_module_init+0x0/0xb1 @ 1 initcall crypto_gcm_module_init+0x0/0xb1 returned 0 after 15 usecs calling crypto_ccm_module_init+0x0/0x85 @ 1 initcall crypto_ccm_module_init+0x0/0x85 returned 0 after 8 usecs calling cryptd_init+0x0/0xcc @ 1 initcall cryptd_init+0x0/0xcc returned 0 after 9 usecs calling des_generic_mod_init+0x0/0x6a @ 1 initcall des_generic_mod_init+0x0/0x6a returned 0 after 482 usecs calling fcrypt_mod_init+0x0/0x40 @ 1 alg: No test for fcrypt (fcrypt-generic) initcall fcrypt_mod_init+0x0/0x40 returned 0 after 3869 usecs calling blowfish_mod_init+0x0/0x3d @ 1 initcall blowfish_mod_init+0x0/0x3d returned 0 after 882 usecs calling serpent_mod_init+0x0/0x73 @ 1 initcall serpent_mod_init+0x0/0x73 returned 0 after 490 usecs calling aes_init+0x0/0x40 @ 1 initcall aes_init+0x0/0x40 returned 0 after 252 usecs calling cast6_mod_init+0x0/0x40 @ 1 initcall cast6_mod_init+0x0/0x40 returned 0 after 224 usecs calling arc4_init+0x0/0x40 @ 1 initcall arc4_init+0x0/0x40 returned 0 after 220 usecs calling tea_mod_init+0x0/0xa0 @ 1 initcall tea_mod_init+0x0/0xa0 returned 0 after 764 usecs calling khazad_mod_init+0x0/0x40 @ 1 initcall khazad_mod_init+0x0/0x40 returned 0 after 289 usecs calling anubis_mod_init+0x0/0x40 @ 1 initcall anubis_mod_init+0x0/0x40 returned 0 after 277 usecs calling salsa20_generic_mod_init+0x0/0x40 @ 1 initcall salsa20_generic_mod_init+0x0/0x40 returned 0 after 152 usecs calling deflate_mod_init+0x0/0x40 @ 1 initcall deflate_mod_init+0x0/0x40 returned 0 after 653 usecs calling crc32c_mod_init+0x0/0x40 @ 1 initcall crc32c_mod_init+0x0/0x40 returned 0 after 308 usecs calling crypto_authenc_module_init+0x0/0x40 @ 1 initcall crypto_authenc_module_init+0x0/0x40 returned 0 after 4 usecs calling krng_mod_init+0x0/0x40 @ 1 alg: No test for stdrng (krng) initcall krng_mod_init+0x0/0x40 returned 0 after 2996 usecs calling prng_mod_init+0x0/0x40 @ 1 initcall prng_mod_init+0x0/0x40 returned 0 after 9996 usecs calling ghash_mod_init+0x0/0x40 @ 1 alg: No test for ghash (ghash-generic) initcall ghash_mod_init+0x0/0x40 returned 0 after 3657 usecs calling proc_genhd_init+0x0/0x65 @ 1 initcall proc_genhd_init+0x0/0x65 returned 0 after 53 usecs calling noop_init+0x0/0x40 @ 1 io scheduler noop registered initcall noop_init+0x0/0x40 returned 0 after 2623 usecs calling as_init+0x0/0x40 @ 1 io scheduler anticipatory registered (default) initcall as_init+0x0/0x40 returned 0 after 4130 usecs calling deadline_init+0x0/0x40 @ 1 io scheduler deadline registered initcall deadline_init+0x0/0x40 returned 0 after 2944 usecs calling cfq_init+0x0/0xcd @ 1 io scheduler cfq registered initcall cfq_init+0x0/0xcd returned 0 after 4641 usecs calling debug_objects_init_debugfs+0x0/0x91 @ 1 initcall debug_objects_init_debugfs+0x0/0x91 returned 0 after 51 usecs calling libcrc32c_mod_init+0x0/0x53 @ 1 initcall libcrc32c_mod_init+0x0/0x53 returned 0 after 11 usecs calling init_kmp+0x0/0x40 @ 1 initcall init_kmp+0x0/0x40 returned 0 after 16 usecs calling init_bm+0x0/0x40 @ 1 initcall init_bm+0x0/0x40 returned 0 after 1 usecs calling init_fsm+0x0/0x40 @ 1 initcall init_fsm+0x0/0x40 returned 0 after 1 usecs calling dynamic_debug_init+0x0/0x180 @ 1 initcall dynamic_debug_init+0x0/0x180 returned 0 after 2487 usecs calling pci_init+0x0/0x6c @ 1 agpgart-amd64 0000:00:00.0: calling via_no_dac+0x0/0x7d agpgart-amd64 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x60 agpgart-amd64 0000:00:00.0: calling pci_fixup_video+0x0/0xf1 pci 0000:00:01.0: calling via_no_dac+0x0/0x7d pci 0000:00:01.0: disabling DAC on VIA PCI bridge pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x60 pci 0000:00:01.0: calling pci_fixup_video+0x0/0xf1 pci 0000:00:07.0: calling via_no_dac+0x0/0x7d pci 0000:00:07.0: calling quirk_cardbus_legacy+0x0/0x60 pci 0000:00:07.0: calling pci_fixup_video+0x0/0xf1 pci 0000:00:0a.0: calling quirk_cardbus_legacy+0x0/0x60 pci 0000:00:0a.0: calling pci_fixup_video+0x0/0xf1 pci 0000:00:0d.0: calling quirk_cardbus_legacy+0x0/0x60 pci 0000:00:0d.0: calling pci_fixup_video+0x0/0xf1 pci 0000:00:0d.1: calling quirk_cardbus_legacy+0x0/0x60 pci 0000:00:0d.1: calling pci_fixup_video+0x0/0xf1 pci 0000:00:0f.0: calling via_no_dac+0x0/0x7d pci 0000:00:0f.0: calling quirk_cardbus_legacy+0x0/0x60 pci 0000:00:0f.0: calling pci_fixup_video+0x0/0xf1 pci 0000:00:0f.1: calling via_no_dac+0x0/0x7d pci 0000:00:0f.1: calling quirk_cardbus_legacy+0x0/0x60 pci 0000:00:0f.1: calling pci_fixup_video+0x0/0xf1 pci 0000:00:10.0: calling via_no_dac+0x0/0x7d pci 0000:00:10.0: calling quirk_cardbus_legacy+0x0/0x60 pci 0000:00:10.0: calling pci_fixup_video+0x0/0xf1 pci 0000:00:10.1: calling via_no_dac+0x0/0x7d pci 0000:00:10.1: calling quirk_cardbus_legacy+0x0/0x60 pci 0000:00:10.1: calling pci_fixup_video+0x0/0xf1 pci 0000:00:10.2: calling via_no_dac+0x0/0x7d pci 0000:00:10.2: calling quirk_cardbus_legacy+0x0/0x60 pci 0000:00:10.2: calling pci_fixup_video+0x0/0xf1 pci 0000:00:10.3: calling via_no_dac+0x0/0x7d pci 0000:00:10.3: calling quirk_cardbus_legacy+0x0/0x60 pci 0000:00:10.3: calling pci_fixup_video+0x0/0xf1 pci 0000:00:10.4: calling via_no_dac+0x0/0x7d pci 0000:00:10.4: calling quirk_cardbus_legacy+0x0/0x60 pci 0000:00:10.4: calling pci_fixup_video+0x0/0xf1 pci 0000:00:11.0: calling via_no_dac+0x0/0x7d pci 0000:00:11.0: calling quirk_cardbus_legacy+0x0/0x60 pci 0000:00:11.0: calling quirk_via_vt8237_bypass_apic_deassert+0x0/0xb0 pci 0000:00:11.0: calling pci_fixup_video+0x0/0xf1 pci 0000:00:11.5: calling via_no_dac+0x0/0x7d pci 0000:00:11.5: calling quirk_cardbus_legacy+0x0/0x60 pci 0000:00:11.5: calling pci_fixup_video+0x0/0xf1 pci 0000:00:11.6: calling via_no_dac+0x0/0x7d pci 0000:00:11.6: calling quirk_cardbus_legacy+0x0/0x60 pci 0000:00:11.6: calling pci_fixup_video+0x0/0xf1 pci 0000:00:18.0: calling quirk_cardbus_legacy+0x0/0x60 pci 0000:00:18.0: calling pci_fixup_video+0x0/0xf1 pci 0000:00:18.1: calling quirk_cardbus_legacy+0x0/0x60 pci 0000:00:18.1: calling pci_fixup_video+0x0/0xf1 pci 0000:00:18.2: calling quirk_cardbus_legacy+0x0/0x60 pci 0000:00:18.2: calling pci_fixup_video+0x0/0xf1 pci 0000:00:18.3: calling quirk_cardbus_legacy+0x0/0x60 pci 0000:00:18.3: calling pci_fixup_video+0x0/0xf1 pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x60 pci 0000:01:00.0: calling pci_fixup_video+0x0/0xf1 pci 0000:01:00.0: Boot video device pci 0000:01:00.1: calling quirk_cardbus_legacy+0x0/0x60 pci 0000:01:00.1: calling pci_fixup_video+0x0/0xf1 initcall pci_init+0x0/0x6c returned 0 after 275374 usecs calling pci_proc_init+0x0/0x93 @ 1 initcall pci_proc_init+0x0/0x93 returned 0 after 871 usecs calling pcie_portdrv_init+0x0/0x81 @ 1 bus: 'pci_express': registered bus: 'pci': add driver pcieport-driver bus: 'pci': driver_probe_device: matched device 0000:00:01.0 with driver pcieport-driver bus: 'pci': really_probe: probing driver pcieport-driver with device 0000:00:01.0 pci 0000:00:01.0: __pm_runtime_idle()! pci 0000:00:01.0: __pm_runtime_idle() returns -11! initcall pcie_portdrv_init+0x0/0x81 returned 0 after 30192 usecs calling aer_service_init+0x0/0x60 @ 1 bus: 'pci_express': add driver aer initcall aer_service_init+0x0/0x60 returned 0 after 3499 usecs calling aer_inject_init+0x0/0x40 @ 1 device: 'aer_inject': device_add PM: Adding info for No Bus:aer_inject initcall aer_inject_init+0x0/0x40 returned 0 after 6800 usecs calling pci_hotplug_init+0x0/0x74 @ 1 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 initcall pci_hotplug_init+0x0/0x74 returned 0 after 4213 usecs calling pcied_init+0x0/0xb0 @ 1 bus: 'pci_express': add driver pciehp_dummy bus: 'pci_express': remove driver pciehp_dummy driver: 'pciehp_dummy': driver_release bus: 'pci_express': add driver pciehp pciehp: PCI Express Hot Plug Controller Driver version: 0.4 initcall pcied_init+0x0/0xb0 returned 0 after 21614 usecs calling acpiphp_init+0x0/0x90 @ 1 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 initcall acpiphp_init+0x0/0x90 returned -19 after 7050 usecs calling zt5550_init+0x0/0xa5 @ 1 cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2 bus: 'pci': add driver zt5550_hc initcall zt5550_init+0x0/0xa5 returned 0 after 8777 usecs calling shpcd_init+0x0/0x8b @ 1 bus: 'pci': add driver shpchp bus: 'pci': driver_probe_device: matched device 0000:00:01.0 with driver shpchp bus: 'pci': really_probe: probing driver shpchp with device 0000:00:01.0 pci 0000:00:01.0: __pm_runtime_idle()! pci 0000:00:01.0: __pm_runtime_idle() returns -11! shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 initcall shpcd_init+0x0/0x8b returned 0 after 29903 usecs calling init_legacy+0x0/0x6b @ 1 initcall init_legacy+0x0/0x6b returned 0 after 1116 usecs calling pci_stub_init+0x0/0x168 @ 1 bus: 'pci': add driver pci-stub pci-stub: invalid id string "" initcall pci_stub_init+0x0/0x168 returned 0 after 6186 usecs calling fb_console_init+0x0/0x15e @ 1 device: 'fbcon': device_add PM: Adding info for No Bus:fbcon initcall fb_console_init+0x0/0x15e returned 0 after 6124 usecs calling platform_lcd_init+0x0/0x40 @ 1 bus: 'platform': add driver platform-lcd initcall platform_lcd_init+0x0/0x40 returned 0 after 4010 usecs calling tdo24m_init+0x0/0x3d @ 1 bus: 'spi': add driver tdo24m initcall tdo24m_init+0x0/0x3d returned 0 after 3074 usecs calling genericbl_init+0x0/0x40 @ 1 bus: 'platform': add driver generic-bl initcall genericbl_init+0x0/0x40 returned 0 after 3831 usecs calling mbp_init+0x0/0x130 @ 1 initcall mbp_init+0x0/0x130 returned -19 after 3 usecs calling kb3886_init+0x0/0x70 @ 1 initcall kb3886_init+0x0/0x70 returned -19 after 1 usecs calling wm831x_backlight_init+0x0/0x3d @ 1 bus: 'platform': add driver wm831x-backlight initcall wm831x_backlight_init+0x0/0x3d returned 0 after 4347 usecs calling display_class_init+0x0/0xa5 @ 1 device class 'display': registering initcall display_class_init+0x0/0xa5 returned 0 after 3573 usecs calling arcfb_init+0x0/0x9d @ 1 initcall arcfb_init+0x0/0x9d returned -6 after 0 usecs initcall arcfb_init+0x0/0x9d returned with error code -6 calling pm2fb_init+0x0/0x155 @ 1 bus: 'pci': add driver pm2fb initcall pm2fb_init+0x0/0x155 returned 0 after 3035 usecs calling pm3fb_init+0x0/0x114 @ 1 bus: 'pci': add driver pm3fb initcall pm3fb_init+0x0/0x114 returned 0 after 3026 usecs calling rivafb_init+0x0/0x1aa @ 1 bus: 'pci': add driver rivafb initcall rivafb_init+0x0/0x1aa returned 0 after 3122 usecs calling nvidiafb_init+0x0/0x29b @ 1 bus: 'pci': add driver nvidiafb initcall nvidiafb_init+0x0/0x29b returned 0 after 3286 usecs calling atyfb_init+0x0/0x215 @ 1 bus: 'pci': add driver atyfb initcall atyfb_init+0x0/0x215 returned 0 after 3169 usecs calling aty128fb_init+0x0/0x14e @ 1 bus: 'pci': add driver aty128fb initcall aty128fb_init+0x0/0x14e returned 0 after 3319 usecs calling sisfb_init+0x0/0x848 @ 1 bus: 'pci': add driver sisfb initcall sisfb_init+0x0/0x848 returned 0 after 3058 usecs calling viafb_init+0x0/0x41a @ 1 VIA Graphics Intergration Chipset framebuffer 2.4 initializing bus: 'pci': add driver viafb initcall viafb_init+0x0/0x41a returned 0 after 8509 usecs calling savagefb_init+0x0/0x9d @ 1 bus: 'pci': add driver savagefb initcall savagefb_init+0x0/0x9d returned 0 after 3291 usecs calling neofb_init+0x0/0x16e @ 1 bus: 'pci': add driver neofb initcall neofb_init+0x0/0x16e returned 0 after 3028 usecs calling vt8623fb_init+0x0/0xa8 @ 1 bus: 'pci': add driver vt8623fb initcall vt8623fb_init+0x0/0xa8 returned 0 after 3277 usecs calling tridentfb_init+0x0/0x21d @ 1 bus: 'pci': add driver tridentfb initcall tridentfb_init+0x0/0x21d returned 0 after 3368 usecs calling vmlfb_init+0x0/0xc6 @ 1 vmlfb: initializing bus: 'pci': add driver vmlfb initcall vmlfb_init+0x0/0xc6 returned 0 after 4873 usecs calling s3fb_init+0x0/0x111 @ 1 bus: 'pci': add driver s3fb initcall s3fb_init+0x0/0x111 returned 0 after 2941 usecs calling arkfb_init+0x0/0xa7 @ 1 bus: 'pci': add driver arkfb initcall arkfb_init+0x0/0xa7 returned 0 after 3133 usecs calling sstfb_init+0x0/0x1ee @ 1 bus: 'pci': add driver sstfb initcall sstfb_init+0x0/0x1ee returned 0 after 3032 usecs calling tmiofb_init+0x0/0x92 @ 1 bus: 'platform': add driver tmio-fb initcall tmiofb_init+0x0/0x92 returned 0 after 3597 usecs calling broadsheetfb_init+0x0/0x40 @ 1 bus: 'platform': add driver broadsheetfb initcall broadsheetfb_init+0x0/0x40 returned 0 after 4013 usecs calling s1d13xxxfb_init+0x0/0x60 @ 1 bus: 'platform': add driver s1d13xxxfb initcall s1d13xxxfb_init+0x0/0x60 returned 0 after 3833 usecs calling sm501fb_init+0x0/0x3d @ 1 bus: 'platform': add driver sm501-fb initcall sm501fb_init+0x0/0x3d returned 0 after 3669 usecs calling mb862xxfb_init+0x0/0x32 @ 1 initcall mb862xxfb_init+0x0/0x32 returned -19 after 0 usecs calling acpi_reserve_resources+0x0/0x112 @ 1 initcall acpi_reserve_resources+0x0/0x112 returned 0 after 26 usecs calling irqrouter_init_sysfs+0x0/0x5f @ 1 Registering sysdev class 'irqrouter' Registering sys device of class 'irqrouter' Registering sys device 'irqrouter0' initcall irqrouter_init_sysfs+0x0/0x5f returned 0 after 11173 usecs calling acpi_ac_init+0x0/0x4f @ 1 bus: 'acpi': add driver ac initcall acpi_ac_init+0x0/0x4f returned 0 after 2851 usecs calling acpi_button_init+0x0/0x7d @ 1 bus: 'acpi': add driver button bus: 'acpi': driver_probe_device: matched device PNP0C0C:00 with driver button bus: 'acpi': really_probe: probing driver button with device PNP0C0C:00 device: 'input0': device_add PM: Adding info for No Bus:input0 input: Power Button as /class/input/input0 ACPI: Power Button [PWRB] driver: 'PNP0C0C:00': driver_bound: bound to device 'button' bus: 'acpi': really_probe: bound device PNP0C0C:00 to driver button button PNP0C0C:00: __pm_runtime_idle()! button PNP0C0C:00: __pm_runtime_idle() returns -11! bus: 'acpi': driver_probe_device: matched device PNP0C0E:00 with driver button bus: 'acpi': really_probe: probing driver button with device PNP0C0E:00 device: 'input1': device_add PM: Adding info for No Bus:input1 input: Sleep Button as /class/input/input1 ACPI: Sleep Button [SLPB] driver: 'PNP0C0E:00': driver_bound: bound to device 'button' bus: 'acpi': really_probe: bound device PNP0C0E:00 to driver button button PNP0C0E:00: __pm_runtime_idle()! button PNP0C0E:00: __pm_runtime_idle() returns -11! bus: 'acpi': driver_probe_device: matched device LNXPWRBN:00 with driver button bus: 'acpi': really_probe: probing driver button with device LNXPWRBN:00 device: 'input2': device_add PM: Adding info for No Bus:input2 input: Power Button as /class/input/input2 ACPI: Power Button [PWRF] driver: 'LNXPWRBN:00': driver_bound: bound to device 'button' bus: 'acpi': really_probe: bound device LNXPWRBN:00 to driver button button LNXPWRBN:00: __pm_runtime_idle()! button LNXPWRBN:00: __pm_runtime_idle() returns -11! initcall acpi_button_init+0x0/0x7d returned 0 after 139266 usecs calling acpi_video_init+0x0/0x3e @ 1 bus: 'acpi': add driver video initcall acpi_video_init+0x0/0x3e returned 0 after 3130 usecs calling acpi_pci_slot_init+0x0/0x47 @ 1 initcall acpi_pci_slot_init+0x0/0x47 returned 0 after 2189 usecs calling acpi_processor_init+0x0/0x95 @ 1 bus: 'acpi': add driver processor bus: 'acpi': driver_probe_device: matched device LNXCPU:00 with driver processor bus: 'acpi': really_probe: probing driver processor with device LNXCPU:00 ACPI: processor limited to max C-state 1 device: 'cooling_device0': device_add PM: Adding info for No Bus:cooling_device0 processor LNXCPU:00: registered as cooling_device0 driver: 'LNXCPU:00': driver_bound: bound to device 'processor' bus: 'acpi': really_probe: bound device LNXCPU:00 to driver processor processor LNXCPU:00: __pm_runtime_idle()! processor LNXCPU:00: __pm_runtime_idle() returns -11! initcall acpi_processor_init+0x0/0x95 returned 0 after 53318 usecs calling acpi_container_init+0x0/0x65 @ 1 bus: 'acpi': add driver container initcall acpi_container_init+0x0/0x65 returned 0 after 70878 usecs calling acpi_thermal_init+0x0/0xa2 @ 1 bus: 'acpi': add driver thermal bus: 'acpi': driver_probe_device: matched device LNXTHERM:00 with driver thermal bus: 'acpi': really_probe: probing driver thermal with device LNXTHERM:00 acpi LNXTHERM:00: __pm_runtime_idle()! acpi LNXTHERM:00: __pm_runtime_idle() returns -11! initcall acpi_thermal_init+0x0/0xa2 returned 0 after 24815 usecs calling acpi_battery_init+0x0/0x3d @ 1 initcall acpi_battery_init+0x0/0x3d returned 0 after 45 usecs calling acpi_smb_hc_init+0x0/0x3f @ 1 bus: 'acpi': add driver smbus_hc calling 1_acpi_battery_init_async+0x0/0x42 @ 926 bus: 'acpi': add driver battery initcall 1_acpi_battery_init_async+0x0/0x42 returned 0 after 3256 usecs initcall acpi_smb_hc_init+0x0/0x3f returned 0 after 17600 usecs calling acpi_sbs_init+0x0/0x4f @ 1 bus: 'acpi': add driver sbs initcall acpi_sbs_init+0x0/0x4f returned 0 after 2931 usecs calling acpi_power_meter_init+0x0/0x5c @ 1 bus: 'acpi': add driver power_meter initcall acpi_power_meter_init+0x0/0x5c returned 0 after 3598 usecs calling rand_initialize+0x0/0x60 @ 1 initcall rand_initialize+0x0/0x60 returned 0 after 30 usecs calling tty_init+0x0/0x126 @ 1 device: 'tty': device_add PM: Adding info for No Bus:tty device: 'console': device_add PM: Adding info for No Bus:console device: 'tty0': device_add PM: Adding info for No Bus:tty0 device class 'vc': registering device: 'vcs': device_add PM: Adding info for No Bus:vcs device: 'vcsa': device_add PM: Adding info for No Bus:vcsa device: 'vcs1': device_add PM: Adding info for No Bus:vcs1 device: 'vcsa1': device_add PM: Adding info for No Bus:vcsa1 device: 'tty1': device_add PM: Adding info for No Bus:tty1 device: 'tty2': device_add PM: Adding info for No Bus:tty2 device: 'tty3': device_add PM: Adding info for No Bus:tty3 device: 'tty4': device_add PM: Adding info for No Bus:tty4 device: 'tty5': device_add PM: Adding info for No Bus:tty5 device: 'tty6': device_add PM: Adding info for No Bus:tty6 device: 'tty7': device_add PM: Adding info for No Bus:tty7 device: 'tty8': device_add PM: Adding info for No Bus:tty8 device: 'tty9': device_add PM: Adding info for No Bus:tty9 device: 'tty10': device_add PM: Adding info for No Bus:tty10 device: 'tty11': device_add PM: Adding info for No Bus:tty11 device: 'tty12': device_add PM: Adding info for No Bus:tty12 device: 'tty13': device_add PM: Adding info for No Bus:tty13 device: 'tty14': device_add PM: Adding info for No Bus:tty14 device: 'tty15': device_add PM: Adding info for No Bus:tty15 device: 'tty16': device_add PM: Adding info for No Bus:tty16 device: 'tty17': device_add PM: Adding info for No Bus:tty17 device: 'tty18': device_add PM: Adding info for No Bus:tty18 device: 'tty19': device_add PM: Adding info for No Bus:tty19 device: 'tty20': device_add PM: Adding info for No Bus:tty20 device: 'tty21': device_add PM: Adding info for No Bus:tty21 device: 'tty22': device_add PM: Adding info for No Bus:tty22 device: 'tty23': device_add PM: Adding info for No Bus:tty23 device: 'tty24': device_add PM: Adding info for No Bus:tty24 device: 'tty25': device_add PM: Adding info for No Bus:tty25 device: 'tty26': device_add PM: Adding info for No Bus:tty26 device: 'tty27': device_add PM: Adding info for No Bus:tty27 device: 'tty28': device_add PM: Adding info for No Bus:tty28 device: 'tty29': device_add PM: Adding info for No Bus:tty29 device: 'tty30': device_add PM: Adding info for No Bus:tty30 device: 'tty31': device_add PM: Adding info for No Bus:tty31 device: 'tty32': device_add PM: Adding info for No Bus:tty32 device: 'tty33': device_add PM: Adding info for No Bus:tty33 device: 'tty34': device_add PM: Adding info for No Bus:tty34 device: 'tty35': device_add PM: Adding info for No Bus:tty35 device: 'tty36': device_add PM: Adding info for No Bus:tty36 device: 'tty37': device_add PM: Adding info for No Bus:tty37 device: 'tty38': device_add PM: Adding info for No Bus:tty38 device: 'tty39': device_add PM: Adding info for No Bus:tty39 device: 'tty40': device_add PM: Adding info for No Bus:tty40 device: 'tty41': device_add PM: Adding info for No Bus:tty41 device: 'tty42': device_add PM: Adding info for No Bus:tty42 device: 'tty43': device_add PM: Adding info for No Bus:tty43 device: 'tty44': device_add PM: Adding info for No Bus:tty44 device: 'tty45': device_add PM: Adding info for No Bus:tty45 device: 'tty46': device_add PM: Adding info for No Bus:tty46 device: 'tty47': device_add PM: Adding info for No Bus:tty47 device: 'tty48': device_add PM: Adding info for No Bus:tty48 device: 'tty49': device_add PM: Adding info for No Bus:tty49 device: 'tty50': device_add PM: Adding info for No Bus:tty50 device: 'tty51': device_add PM: Adding info for No Bus:tty51 device: 'tty52': device_add PM: Adding info for No Bus:tty52 device: 'tty53': device_add PM: Adding info for No Bus:tty53 device: 'tty54': device_add PM: Adding info for No Bus:tty54 device: 'tty55': device_add PM: Adding info for No Bus:tty55 device: 'tty56': device_add PM: Adding info for No Bus:tty56 device: 'tty57': device_add PM: Adding info for No Bus:tty57 device: 'tty58': device_add PM: Adding info for No Bus:tty58 device: 'tty59': device_add PM: Adding info for No Bus:tty59 device: 'tty60': device_add PM: Adding info for No Bus:tty60 device: 'tty61': device_add PM: Adding info for No Bus:tty61 device: 'tty62': device_add PM: Adding info for No Bus:tty62 device: 'tty63': device_add PM: Adding info for No Bus:tty63 initcall tty_init+0x0/0x126 returned 0 after 424370 usecs calling pty_init+0x0/0x72d @ 1 device: 'ptyp0': device_add PM: Adding info for No Bus:ptyp0 device: 'ptyp1': device_add PM: Adding info for No Bus:ptyp1 device: 'ptyp2': device_add PM: Adding info for No Bus:ptyp2 device: 'ptyp3': device_add PM: Adding info for No Bus:ptyp3 device: 'ptyp4': device_add PM: Adding info for No Bus:ptyp4 device: 'ptyp5': device_add PM: Adding info for No Bus:ptyp5 device: 'ptyp6': device_add PM: Adding info for No Bus:ptyp6 device: 'ptyp7': device_add PM: Adding info for No Bus:ptyp7 device: 'ptyp8': device_add PM: Adding info for No Bus:ptyp8 device: 'ptyp9': device_add PM: Adding info for No Bus:ptyp9 device: 'ptypa': device_add PM: Adding info for No Bus:ptypa device: 'ptypb': device_add PM: Adding info for No Bus:ptypb device: 'ptypc': device_add PM: Adding info for No Bus:ptypc device: 'ptypd': device_add PM: Adding info for No Bus:ptypd device: 'ptype': device_add PM: Adding info for No Bus:ptype device: 'ptypf': device_add PM: Adding info for No Bus:ptypf device: 'ptyq0': device_add PM: Adding info for No Bus:ptyq0 device: 'ptyq1': device_add PM: Adding info for No Bus:ptyq1 device: 'ptyq2': device_add PM: Adding info for No Bus:ptyq2 device: 'ptyq3': device_add PM: Adding info for No Bus:ptyq3 device: 'ptyq4': device_add PM: Adding info for No Bus:ptyq4 device: 'ptyq5': device_add PM: Adding info for No Bus:ptyq5 device: 'ptyq6': device_add PM: Adding info for No Bus:ptyq6 device: 'ptyq7': device_add PM: Adding info for No Bus:ptyq7 device: 'ptyq8': device_add PM: Adding info for No Bus:ptyq8 device: 'ptyq9': device_add PM: Adding info for No Bus:ptyq9 device: 'ptyqa': device_add PM: Adding info for No Bus:ptyqa device: 'ptyqb': device_add PM: Adding info for No Bus:ptyqb device: 'ptyqc': device_add PM: Adding info for No Bus:ptyqc device: 'ptyqd': device_add PM: Adding info for No Bus:ptyqd device: 'ptyqe': device_add PM: Adding info for No Bus:ptyqe device: 'ptyqf': device_add PM: Adding info for No Bus:ptyqf device: 'ptyr0': device_add PM: Adding info for No Bus:ptyr0 device: 'ptyr1': device_add PM: Adding info for No Bus:ptyr1 device: 'ptyr2': device_add PM: Adding info for No Bus:ptyr2 device: 'ptyr3': device_add PM: Adding info for No Bus:ptyr3 device: 'ptyr4': device_add PM: Adding info for No Bus:ptyr4 device: 'ptyr5': device_add PM: Adding info for No Bus:ptyr5 device: 'ptyr6': device_add PM: Adding info for No Bus:ptyr6 device: 'ptyr7': device_add PM: Adding info for No Bus:ptyr7 device: 'ptyr8': device_add PM: Adding info for No Bus:ptyr8 device: 'ptyr9': device_add PM: Adding info for No Bus:ptyr9 device: 'ptyra': device_add PM: Adding info for No Bus:ptyra device: 'ptyrb': device_add PM: Adding info for No Bus:ptyrb device: 'ptyrc': device_add PM: Adding info for No Bus:ptyrc device: 'ptyrd': device_add PM: Adding info for No Bus:ptyrd device: 'ptyre': device_add PM: Adding info for No Bus:ptyre device: 'ptyrf': device_add PM: Adding info for No Bus:ptyrf device: 'ptys0': device_add PM: Adding info for No Bus:ptys0 device: 'ptys1': device_add PM: Adding info for No Bus:ptys1 device: 'ptys2': device_add PM: Adding info for No Bus:ptys2 device: 'ptys3': device_add PM: Adding info for No Bus:ptys3 device: 'ptys4': device_add PM: Adding info for No Bus:ptys4 device: 'ptys5': device_add PM: Adding info for No Bus:ptys5 device: 'ptys6': device_add PM: Adding info for No Bus:ptys6 device: 'ptys7': device_add PM: Adding info for No Bus:ptys7 device: 'ptys8': device_add PM: Adding info for No Bus:ptys8 device: 'ptys9': device_add PM: Adding info for No Bus:ptys9 device: 'ptysa': device_add PM: Adding info for No Bus:ptysa device: 'ptysb': device_add PM: Adding info for No Bus:ptysb device: 'ptysc': device_add PM: Adding info for No Bus:ptysc device: 'ptysd': device_add PM: Adding info for No Bus:ptysd device: 'ptyse': device_add PM: Adding info for No Bus:ptyse device: 'ptysf': device_add PM: Adding info for No Bus:ptysf device: 'ptyt0': device_add PM: Adding info for No Bus:ptyt0 device: 'ptyt1': device_add PM: Adding info for No Bus:ptyt1 device: 'ptyt2': device_add PM: Adding info for No Bus:ptyt2 device: 'ptyt3': device_add PM: Adding info for No Bus:ptyt3 device: 'ptyt4': device_add PM: Adding info for No Bus:ptyt4 device: 'ptyt5': device_add PM: Adding info for No Bus:ptyt5 device: 'ptyt6': device_add PM: Adding info for No Bus:ptyt6 device: 'ptyt7': device_add PM: Adding info for No Bus:ptyt7 device: 'ptyt8': device_add PM: Adding info for No Bus:ptyt8 device: 'ptyt9': device_add PM: Adding info for No Bus:ptyt9 device: 'ptyta': device_add PM: Adding info for No Bus:ptyta device: 'ptytb': device_add PM: Adding info for No Bus:ptytb device: 'ptytc': device_add PM: Adding info for No Bus:ptytc device: 'ptytd': device_add PM: Adding info for No Bus:ptytd device: 'ptyte': device_add PM: Adding info for No Bus:ptyte device: 'ptytf': device_add PM: Adding info for No Bus:ptytf device: 'ptyu0': device_add PM: Adding info for No Bus:ptyu0 device: 'ptyu1': device_add PM: Adding info for No Bus:ptyu1 device: 'ptyu2': device_add PM: Adding info for No Bus:ptyu2 device: 'ptyu3': device_add PM: Adding info for No Bus:ptyu3 device: 'ptyu4': device_add PM: Adding info for No Bus:ptyu4 device: 'ptyu5': device_add PM: Adding info for No Bus:ptyu5 device: 'ptyu6': device_add PM: Adding info for No Bus:ptyu6 device: 'ptyu7': device_add PM: Adding info for No Bus:ptyu7 device: 'ptyu8': device_add PM: Adding info for No Bus:ptyu8 device: 'ptyu9': device_add PM: Adding info for No Bus:ptyu9 device: 'ptyua': device_add PM: Adding info for No Bus:ptyua device: 'ptyub': device_add PM: Adding info for No Bus:ptyub device: 'ptyuc': device_add PM: Adding info for No Bus:ptyuc device: 'ptyud': device_add PM: Adding info for No Bus:ptyud device: 'ptyue': device_add PM: Adding info for No Bus:ptyue device: 'ptyuf': device_add PM: Adding info for No Bus:ptyuf device: 'ptyv0': device_add PM: Adding info for No Bus:ptyv0 device: 'ptyv1': device_add PM: Adding info for No Bus:ptyv1 device: 'ptyv2': device_add PM: Adding info for No Bus:ptyv2 device: 'ptyv3': device_add PM: Adding info for No Bus:ptyv3 device: 'ptyv4': device_add PM: Adding info for No Bus:ptyv4 device: 'ptyv5': device_add PM: Adding info for No Bus:ptyv5 device: 'ptyv6': device_add PM: Adding info for No Bus:ptyv6 device: 'ptyv7': device_add PM: Adding info for No Bus:ptyv7 device: 'ptyv8': device_add PM: Adding info for No Bus:ptyv8 device: 'ptyv9': device_add PM: Adding info for No Bus:ptyv9 device: 'ptyva': device_add PM: Adding info for No Bus:ptyva device: 'ptyvb': device_add PM: Adding info for No Bus:ptyvb device: 'ptyvc': device_add PM: Adding info for No Bus:ptyvc device: 'ptyvd': device_add PM: Adding info for No Bus:ptyvd device: 'ptyve': device_add PM: Adding info for No Bus:ptyve device: 'ptyvf': device_add PM: Adding info for No Bus:ptyvf device: 'ptyw0': device_add PM: Adding info for No Bus:ptyw0 device: 'ptyw1': device_add PM: Adding info for No Bus:ptyw1 device: 'ptyw2': device_add PM: Adding info for No Bus:ptyw2 device: 'ptyw3': device_add PM: Adding info for No Bus:ptyw3 device: 'ptyw4': device_add PM: Adding info for No Bus:ptyw4 device: 'ptyw5': device_add PM: Adding info for No Bus:ptyw5 device: 'ptyw6': device_add PM: Adding info for No Bus:ptyw6 device: 'ptyw7': device_add PM: Adding info for No Bus:ptyw7 device: 'ptyw8': device_add PM: Adding info for No Bus:ptyw8 device: 'ptyw9': device_add PM: Adding info for No Bus:ptyw9 device: 'ptywa': device_add PM: Adding info for No Bus:ptywa device: 'ptywb': device_add PM: Adding info for No Bus:ptywb device: 'ptywc': device_add PM: Adding info for No Bus:ptywc device: 'ptywd': device_add PM: Adding info for No Bus:ptywd device: 'ptywe': device_add PM: Adding info for No Bus:ptywe device: 'ptywf': device_add PM: Adding info for No Bus:ptywf device: 'ptyx0': device_add PM: Adding info for No Bus:ptyx0 device: 'ptyx1': device_add PM: Adding info for No Bus:ptyx1 device: 'ptyx2': device_add PM: Adding info for No Bus:ptyx2 device: 'ptyx3': device_add PM: Adding info for No Bus:ptyx3 device: 'ptyx4': device_add PM: Adding info for No Bus:ptyx4 device: 'ptyx5': device_add PM: Adding info for No Bus:ptyx5 device: 'ptyx6': device_add PM: Adding info for No Bus:ptyx6 device: 'ptyx7': device_add PM: Adding info for No Bus:ptyx7 device: 'ptyx8': device_add PM: Adding info for No Bus:ptyx8 device: 'ptyx9': device_add PM: Adding info for No Bus:ptyx9 device: 'ptyxa': device_add PM: Adding info for No Bus:ptyxa device: 'ptyxb': device_add PM: Adding info for No Bus:ptyxb device: 'ptyxc': device_add PM: Adding info for No Bus:ptyxc device: 'ptyxd': device_add PM: Adding info for No Bus:ptyxd device: 'ptyxe': device_add PM: Adding info for No Bus:ptyxe device: 'ptyxf': device_add PM: Adding info for No Bus:ptyxf device: 'ptyy0': device_add PM: Adding info for No Bus:ptyy0 device: 'ptyy1': device_add PM: Adding info for No Bus:ptyy1 device: 'ptyy2': device_add PM: Adding info for No Bus:ptyy2 device: 'ptyy3': device_add PM: Adding info for No Bus:ptyy3 device: 'ptyy4': device_add PM: Adding info for No Bus:ptyy4 device: 'ptyy5': device_add PM: Adding info for No Bus:ptyy5 device: 'ptyy6': device_add PM: Adding info for No Bus:ptyy6 device: 'ptyy7': device_add PM: Adding info for No Bus:ptyy7 device: 'ptyy8': device_add PM: Adding info for No Bus:ptyy8 device: 'ptyy9': device_add PM: Adding info for No Bus:ptyy9 device: 'ptyya': device_add PM: Adding info for No Bus:ptyya device: 'ptyyb': device_add PM: Adding info for No Bus:ptyyb device: 'ptyyc': device_add PM: Adding info for No Bus:ptyyc device: 'ptyyd': device_add PM: Adding info for No Bus:ptyyd device: 'ptyye': device_add PM: Adding info for No Bus:ptyye device: 'ptyyf': device_add PM: Adding info for No Bus:ptyyf device: 'ptyz0': device_add PM: Adding info for No Bus:ptyz0 device: 'ptyz1': device_add PM: Adding info for No Bus:ptyz1 device: 'ptyz2': device_add PM: Adding info for No Bus:ptyz2 device: 'ptyz3': device_add PM: Adding info for No Bus:ptyz3 device: 'ptyz4': device_add PM: Adding info for No Bus:ptyz4 device: 'ptyz5': device_add PM: Adding info for No Bus:ptyz5 device: 'ptyz6': device_add PM: Adding info for No Bus:ptyz6 device: 'ptyz7': device_add PM: Adding info for No Bus:ptyz7 device: 'ptyz8': device_add PM: Adding info for No Bus:ptyz8 device: 'ptyz9': device_add PM: Adding info for No Bus:ptyz9 device: 'ptyza': device_add PM: Adding info for No Bus:ptyza device: 'ptyzb': device_add PM: Adding info for No Bus:ptyzb device: 'ptyzc': device_add PM: Adding info for No Bus:ptyzc device: 'ptyzd': device_add PM: Adding info for No Bus:ptyzd device: 'ptyze': device_add PM: Adding info for No Bus:ptyze device: 'ptyzf': device_add PM: Adding info for No Bus:ptyzf device: 'ptya0': device_add PM: Adding info for No Bus:ptya0 device: 'ptya1': device_add PM: Adding info for No Bus:ptya1 device: 'ptya2': device_add PM: Adding info for No Bus:ptya2 device: 'ptya3': device_add PM: Adding info for No Bus:ptya3 device: 'ptya4': device_add PM: Adding info for No Bus:ptya4 device: 'ptya5': device_add PM: Adding info for No Bus:ptya5 device: 'ptya6': device_add PM: Adding info for No Bus:ptya6 device: 'ptya7': device_add PM: Adding info for No Bus:ptya7 device: 'ptya8': device_add PM: Adding info for No Bus:ptya8 device: 'ptya9': device_add PM: Adding info for No Bus:ptya9 device: 'ptyaa': device_add PM: Adding info for No Bus:ptyaa device: 'ptyab': device_add PM: Adding info for No Bus:ptyab device: 'ptyac': device_add PM: Adding info for No Bus:ptyac device: 'ptyad': device_add PM: Adding info for No Bus:ptyad device: 'ptyae': device_add PM: Adding info for No Bus:ptyae device: 'ptyaf': device_add PM: Adding info for No Bus:ptyaf device: 'ptyb0': device_add PM: Adding info for No Bus:ptyb0 device: 'ptyb1': device_add PM: Adding info for No Bus:ptyb1 device: 'ptyb2': device_add PM: Adding info for No Bus:ptyb2 device: 'ptyb3': device_add PM: Adding info for No Bus:ptyb3 device: 'ptyb4': device_add PM: Adding info for No Bus:ptyb4 device: 'ptyb5': device_add PM: Adding info for No Bus:ptyb5 device: 'ptyb6': device_add PM: Adding info for No Bus:ptyb6 device: 'ptyb7': device_add PM: Adding info for No Bus:ptyb7 device: 'ptyb8': device_add PM: Adding info for No Bus:ptyb8 device: 'ptyb9': device_add PM: Adding info for No Bus:ptyb9 device: 'ptyba': device_add PM: Adding info for No Bus:ptyba device: 'ptybb': device_add PM: Adding info for No Bus:ptybb device: 'ptybc': device_add PM: Adding info for No Bus:ptybc device: 'ptybd': device_add PM: Adding info for No Bus:ptybd device: 'ptybe': device_add PM: Adding info for No Bus:ptybe device: 'ptybf': device_add PM: Adding info for No Bus:ptybf device: 'ptyc0': device_add PM: Adding info for No Bus:ptyc0 device: 'ptyc1': device_add PM: Adding info for No Bus:ptyc1 device: 'ptyc2': device_add PM: Adding info for No Bus:ptyc2 device: 'ptyc3': device_add PM: Adding info for No Bus:ptyc3 device: 'ptyc4': device_add PM: Adding info for No Bus:ptyc4 device: 'ptyc5': device_add PM: Adding info for No Bus:ptyc5 device: 'ptyc6': device_add PM: Adding info for No Bus:ptyc6 device: 'ptyc7': device_add PM: Adding info for No Bus:ptyc7 device: 'ptyc8': device_add PM: Adding info for No Bus:ptyc8 device: 'ptyc9': device_add PM: Adding info for No Bus:ptyc9 device: 'ptyca': device_add PM: Adding info for No Bus:ptyca device: 'ptycb': device_add PM: Adding info for No Bus:ptycb device: 'ptycc': device_add PM: Adding info for No Bus:ptycc device: 'ptycd': device_add PM: Adding info for No Bus:ptycd device: 'ptyce': device_add PM: Adding info for No Bus:ptyce device: 'ptycf': device_add PM: Adding info for No Bus:ptycf device: 'ptyd0': device_add PM: Adding info for No Bus:ptyd0 device: 'ptyd1': device_add PM: Adding info for No Bus:ptyd1 device: 'ptyd2': device_add PM: Adding info for No Bus:ptyd2 device: 'ptyd3': device_add PM: Adding info for No Bus:ptyd3 device: 'ptyd4': device_add PM: Adding info for No Bus:ptyd4 device: 'ptyd5': device_add PM: Adding info for No Bus:ptyd5 device: 'ptyd6': device_add PM: Adding info for No Bus:ptyd6 device: 'ptyd7': device_add PM: Adding info for No Bus:ptyd7 device: 'ptyd8': device_add PM: Adding info for No Bus:ptyd8 device: 'ptyd9': device_add PM: Adding info for No Bus:ptyd9 device: 'ptyda': device_add PM: Adding info for No Bus:ptyda device: 'ptydb': device_add PM: Adding info for No Bus:ptydb device: 'ptydc': device_add PM: Adding info for No Bus:ptydc device: 'ptydd': device_add PM: Adding info for No Bus:ptydd device: 'ptyde': device_add PM: Adding info for No Bus:ptyde device: 'ptydf': device_add PM: Adding info for No Bus:ptydf device: 'ptye0': device_add PM: Adding info for No Bus:ptye0 device: 'ptye1': device_add PM: Adding info for No Bus:ptye1 device: 'ptye2': device_add PM: Adding info for No Bus:ptye2 device: 'ptye3': device_add PM: Adding info for No Bus:ptye3 device: 'ptye4': device_add PM: Adding info for No Bus:ptye4 device: 'ptye5': device_add PM: Adding info for No Bus:ptye5 device: 'ptye6': device_add PM: Adding info for No Bus:ptye6 device: 'ptye7': device_add PM: Adding info for No Bus:ptye7 device: 'ptye8': device_add PM: Adding info for No Bus:ptye8 device: 'ptye9': device_add PM: Adding info for No Bus:ptye9 device: 'ptyea': device_add PM: Adding info for No Bus:ptyea device: 'ptyeb': device_add PM: Adding info for No Bus:ptyeb device: 'ptyec': device_add PM: Adding info for No Bus:ptyec device: 'ptyed': device_add PM: Adding info for No Bus:ptyed device: 'ptyee': device_add PM: Adding info for No Bus:ptyee device: 'ptyef': device_add PM: Adding info for No Bus:ptyef device: 'ttyp0': device_add PM: Adding info for No Bus:ttyp0 device: 'ttyp1': device_add PM: Adding info for No Bus:ttyp1 device: 'ttyp2': device_add PM: Adding info for No Bus:ttyp2 device: 'ttyp3': device_add PM: Adding info for No Bus:ttyp3 device: 'ttyp4': device_add PM: Adding info for No Bus:ttyp4 device: 'ttyp5': device_add PM: Adding info for No Bus:ttyp5 device: 'ttyp6': device_add PM: Adding info for No Bus:ttyp6 device: 'ttyp7': device_add PM: Adding info for No Bus:ttyp7 device: 'ttyp8': device_add PM: Adding info for No Bus:ttyp8 device: 'ttyp9': device_add PM: Adding info for No Bus:ttyp9 device: 'ttypa': device_add PM: Adding info for No Bus:ttypa device: 'ttypb': device_add PM: Adding info for No Bus:ttypb device: 'ttypc': device_add PM: Adding info for No Bus:ttypc device: 'ttypd': device_add PM: Adding info for No Bus:ttypd device: 'ttype': device_add PM: Adding info for No Bus:ttype device: 'ttypf': device_add PM: Adding info for No Bus:ttypf device: 'ttyq0': device_add PM: Adding info for No Bus:ttyq0 device: 'ttyq1': device_add PM: Adding info for No Bus:ttyq1 device: 'ttyq2': device_add PM: Adding info for No Bus:ttyq2 device: 'ttyq3': device_add PM: Adding info for No Bus:ttyq3 device: 'ttyq4': device_add PM: Adding info for No Bus:ttyq4 device: 'ttyq5': device_add PM: Adding info for No Bus:ttyq5 device: 'ttyq6': device_add PM: Adding info for No Bus:ttyq6 device: 'ttyq7': device_add PM: Adding info for No Bus:ttyq7 device: 'ttyq8': device_add PM: Adding info for No Bus:ttyq8 device: 'ttyq9': device_add PM: Adding info for No Bus:ttyq9 device: 'ttyqa': device_add PM: Adding info for No Bus:ttyqa device: 'ttyqb': device_add PM: Adding info for No Bus:ttyqb device: 'ttyqc': device_add PM: Adding info for No Bus:ttyqc device: 'ttyqd': device_add PM: Adding info for No Bus:ttyqd device: 'ttyqe': device_add PM: Adding info for No Bus:ttyqe device: 'ttyqf': device_add PM: Adding info for No Bus:ttyqf device: 'ttyr0': device_add PM: Adding info for No Bus:ttyr0 device: 'ttyr1': device_add PM: Adding info for No Bus:ttyr1 device: 'ttyr2': device_add PM: Adding info for No Bus:ttyr2 device: 'ttyr3': device_add PM: Adding info for No Bus:ttyr3 device: 'ttyr4': device_add PM: Adding info for No Bus:ttyr4 device: 'ttyr5': device_add PM: Adding info for No Bus:ttyr5 device: 'ttyr6': device_add PM: Adding info for No Bus:ttyr6 device: 'ttyr7': device_add PM: Adding info for No Bus:ttyr7 device: 'ttyr8': device_add PM: Adding info for No Bus:ttyr8 device: 'ttyr9': device_add PM: Adding info for No Bus:ttyr9 device: 'ttyra': device_add PM: Adding info for No Bus:ttyra device: 'ttyrb': device_add PM: Adding info for No Bus:ttyrb device: 'ttyrc': device_add PM: Adding info for No Bus:ttyrc device: 'ttyrd': device_add PM: Adding info for No Bus:ttyrd device: 'ttyre': device_add PM: Adding info for No Bus:ttyre device: 'ttyrf': device_add PM: Adding info for No Bus:ttyrf device: 'ttys0': device_add PM: Adding info for No Bus:ttys0 device: 'ttys1': device_add PM: Adding info for No Bus:ttys1 device: 'ttys2': device_add PM: Adding info for No Bus:ttys2 device: 'ttys3': device_add PM: Adding info for No Bus:ttys3 device: 'ttys4': device_add PM: Adding info for No Bus:ttys4 device: 'ttys5': device_add PM: Adding info for No Bus:ttys5 device: 'ttys6': device_add PM: Adding info for No Bus:ttys6 device: 'ttys7': device_add PM: Adding info for No Bus:ttys7 device: 'ttys8': device_add PM: Adding info for No Bus:ttys8 device: 'ttys9': device_add PM: Adding info for No Bus:ttys9 device: 'ttysa': device_add PM: Adding info for No Bus:ttysa device: 'ttysb': device_add PM: Adding info for No Bus:ttysb device: 'ttysc': device_add PM: Adding info for No Bus:ttysc device: 'ttysd': device_add PM: Adding info for No Bus:ttysd device: 'ttyse': device_add PM: Adding info for No Bus:ttyse device: 'ttysf': device_add PM: Adding info for No Bus:ttysf device: 'ttyt0': device_add PM: Adding info for No Bus:ttyt0 device: 'ttyt1': device_add PM: Adding info for No Bus:ttyt1 device: 'ttyt2': device_add PM: Adding info for No Bus:ttyt2 device: 'ttyt3': device_add PM: Adding info for No Bus:ttyt3 device: 'ttyt4': device_add PM: Adding info for No Bus:ttyt4 device: 'ttyt5': device_add PM: Adding info for No Bus:ttyt5 device: 'ttyt6': device_add PM: Adding info for No Bus:ttyt6 device: 'ttyt7': device_add PM: Adding info for No Bus:ttyt7 device: 'ttyt8': device_add PM: Adding info for No Bus:ttyt8 device: 'ttyt9': device_add PM: Adding info for No Bus:ttyt9 device: 'ttyta': device_add PM: Adding info for No Bus:ttyta device: 'ttytb': device_add PM: Adding info for No Bus:ttytb device: 'ttytc': device_add PM: Adding info for No Bus:ttytc device: 'ttytd': device_add PM: Adding info for No Bus:ttytd device: 'ttyte': device_add PM: Adding info for No Bus:ttyte device: 'ttytf': device_add PM: Adding info for No Bus:ttytf device: 'ttyu0': device_add PM: Adding info for No Bus:ttyu0 device: 'ttyu1': device_add PM: Adding info for No Bus:ttyu1 device: 'ttyu2': device_add PM: Adding info for No Bus:ttyu2 device: 'ttyu3': device_add PM: Adding info for No Bus:ttyu3 device: 'ttyu4': device_add PM: Adding info for No Bus:ttyu4 device: 'ttyu5': device_add PM: Adding info for No Bus:ttyu5 device: 'ttyu6': device_add PM: Adding info for No Bus:ttyu6 device: 'ttyu7': device_add PM: Adding info for No Bus:ttyu7 device: 'ttyu8': device_add PM: Adding info for No Bus:ttyu8 device: 'ttyu9': device_add PM: Adding info for No Bus:ttyu9 device: 'ttyua': device_add PM: Adding info for No Bus:ttyua device: 'ttyub': device_add PM: Adding info for No Bus:ttyub device: 'ttyuc': device_add PM: Adding info for No Bus:ttyuc device: 'ttyud': device_add PM: Adding info for No Bus:ttyud device: 'ttyue': device_add PM: Adding info for No Bus:ttyue device: 'ttyuf': device_add PM: Adding info for No Bus:ttyuf device: 'ttyv0': device_add PM: Adding info for No Bus:ttyv0 device: 'ttyv1': device_add PM: Adding info for No Bus:ttyv1 device: 'ttyv2': device_add PM: Adding info for No Bus:ttyv2 device: 'ttyv3': device_add PM: Adding info for No Bus:ttyv3 device: 'ttyv4': device_add PM: Adding info for No Bus:ttyv4 device: 'ttyv5': device_add PM: Adding info for No Bus:ttyv5 device: 'ttyv6': device_add PM: Adding info for No Bus:ttyv6 device: 'ttyv7': device_add PM: Adding info for No Bus:ttyv7 device: 'ttyv8': device_add PM: Adding info for No Bus:ttyv8 device: 'ttyv9': device_add PM: Adding info for No Bus:ttyv9 device: 'ttyva': device_add PM: Adding info for No Bus:ttyva device: 'ttyvb': device_add PM: Adding info for No Bus:ttyvb device: 'ttyvc': device_add PM: Adding info for No Bus:ttyvc device: 'ttyvd': device_add PM: Adding info for No Bus:ttyvd device: 'ttyve': device_add PM: Adding info for No Bus:ttyve device: 'ttyvf': device_add PM: Adding info for No Bus:ttyvf device: 'ttyw0': device_add PM: Adding info for No Bus:ttyw0 device: 'ttyw1': device_add PM: Adding info for No Bus:ttyw1 device: 'ttyw2': device_add PM: Adding info for No Bus:ttyw2 device: 'ttyw3': device_add PM: Adding info for No Bus:ttyw3 device: 'ttyw4': device_add PM: Adding info for No Bus:ttyw4 device: 'ttyw5': device_add PM: Adding info for No Bus:ttyw5 device: 'ttyw6': device_add PM: Adding info for No Bus:ttyw6 device: 'ttyw7': device_add PM: Adding info for No Bus:ttyw7 device: 'ttyw8': device_add PM: Adding info for No Bus:ttyw8 device: 'ttyw9': device_add PM: Adding info for No Bus:ttyw9 device: 'ttywa': device_add PM: Adding info for No Bus:ttywa device: 'ttywb': device_add PM: Adding info for No Bus:ttywb device: 'ttywc': device_add PM: Adding info for No Bus:ttywc device: 'ttywd': device_add PM: Adding info for No Bus:ttywd device: 'ttywe': device_add PM: Adding info for No Bus:ttywe device: 'ttywf': device_add PM: Adding info for No Bus:ttywf device: 'ttyx0': device_add PM: Adding info for No Bus:ttyx0 device: 'ttyx1': device_add PM: Adding info for No Bus:ttyx1 device: 'ttyx2': device_add PM: Adding info for No Bus:ttyx2 device: 'ttyx3': device_add PM: Adding info for No Bus:ttyx3 device: 'ttyx4': device_add PM: Adding info for No Bus:ttyx4 device: 'ttyx5': device_add PM: Adding info for No Bus:ttyx5 device: 'ttyx6': device_add PM: Adding info for No Bus:ttyx6 device: 'ttyx7': device_add PM: Adding info for No Bus:ttyx7 device: 'ttyx8': device_add PM: Adding info for No Bus:ttyx8 device: 'ttyx9': device_add PM: Adding info for No Bus:ttyx9 device: 'ttyxa': device_add PM: Adding info for No Bus:ttyxa device: 'ttyxb': device_add PM: Adding info for No Bus:ttyxb device: 'ttyxc': device_add PM: Adding info for No Bus:ttyxc device: 'ttyxd': device_add PM: Adding info for No Bus:ttyxd device: 'ttyxe': device_add PM: Adding info for No Bus:ttyxe device: 'ttyxf': device_add PM: Adding info for No Bus:ttyxf device: 'ttyy0': device_add PM: Adding info for No Bus:ttyy0 device: 'ttyy1': device_add PM: Adding info for No Bus:ttyy1 device: 'ttyy2': device_add PM: Adding info for No Bus:ttyy2 device: 'ttyy3': device_add PM: Adding info for No Bus:ttyy3 device: 'ttyy4': device_add PM: Adding info for No Bus:ttyy4 device: 'ttyy5': device_add PM: Adding info for No Bus:ttyy5 device: 'ttyy6': device_add PM: Adding info for No Bus:ttyy6 device: 'ttyy7': device_add PM: Adding info for No Bus:ttyy7 device: 'ttyy8': device_add PM: Adding info for No Bus:ttyy8 device: 'ttyy9': device_add PM: Adding info for No Bus:ttyy9 device: 'ttyya': device_add PM: Adding info for No Bus:ttyya device: 'ttyyb': device_add PM: Adding info for No Bus:ttyyb device: 'ttyyc': device_add PM: Adding info for No Bus:ttyyc device: 'ttyyd': device_add PM: Adding info for No Bus:ttyyd device: 'ttyye': device_add PM: Adding info for No Bus:ttyye device: 'ttyyf': device_add PM: Adding info for No Bus:ttyyf device: 'ttyz0': device_add PM: Adding info for No Bus:ttyz0 device: 'ttyz1': device_add PM: Adding info for No Bus:ttyz1 device: 'ttyz2': device_add PM: Adding info for No Bus:ttyz2 device: 'ttyz3': device_add PM: Adding info for No Bus:ttyz3 device: 'ttyz4': device_add PM: Adding info for No Bus:ttyz4 device: 'ttyz5': device_add PM: Adding info for No Bus:ttyz5 device: 'ttyz6': device_add PM: Adding info for No Bus:ttyz6 device: 'ttyz7': device_add PM: Adding info for No Bus:ttyz7 device: 'ttyz8': device_add PM: Adding info for No Bus:ttyz8 device: 'ttyz9': device_add PM: Adding info for No Bus:ttyz9 device: 'ttyza': device_add PM: Adding info for No Bus:ttyza device: 'ttyzb': device_add PM: Adding info for No Bus:ttyzb device: 'ttyzc': device_add PM: Adding info for No Bus:ttyzc device: 'ttyzd': device_add PM: Adding info for No Bus:ttyzd device: 'ttyze': device_add PM: Adding info for No Bus:ttyze device: 'ttyzf': device_add PM: Adding info for No Bus:ttyzf device: 'ttya0': device_add PM: Adding info for No Bus:ttya0 device: 'ttya1': device_add PM: Adding info for No Bus:ttya1 device: 'ttya2': device_add PM: Adding info for No Bus:ttya2 device: 'ttya3': device_add PM: Adding info for No Bus:ttya3 device: 'ttya4': device_add PM: Adding info for No Bus:ttya4 device: 'ttya5': device_add PM: Adding info for No Bus:ttya5 device: 'ttya6': device_add PM: Adding info for No Bus:ttya6 device: 'ttya7': device_add PM: Adding info for No Bus:ttya7 device: 'ttya8': device_add PM: Adding info for No Bus:ttya8 device: 'ttya9': device_add PM: Adding info for No Bus:ttya9 device: 'ttyaa': device_add PM: Adding info for No Bus:ttyaa device: 'ttyab': device_add PM: Adding info for No Bus:ttyab device: 'ttyac': device_add PM: Adding info for No Bus:ttyac device: 'ttyad': device_add PM: Adding info for No Bus:ttyad device: 'ttyae': device_add PM: Adding info for No Bus:ttyae device: 'ttyaf': device_add PM: Adding info for No Bus:ttyaf device: 'ttyb0': device_add PM: Adding info for No Bus:ttyb0 device: 'ttyb1': device_add PM: Adding info for No Bus:ttyb1 device: 'ttyb2': device_add PM: Adding info for No Bus:ttyb2 device: 'ttyb3': device_add PM: Adding info for No Bus:ttyb3 device: 'ttyb4': device_add PM: Adding info for No Bus:ttyb4 device: 'ttyb5': device_add PM: Adding info for No Bus:ttyb5 device: 'ttyb6': device_add PM: Adding info for No Bus:ttyb6 device: 'ttyb7': device_add PM: Adding info for No Bus:ttyb7 device: 'ttyb8': device_add PM: Adding info for No Bus:ttyb8 device: 'ttyb9': device_add PM: Adding info for No Bus:ttyb9 device: 'ttyba': device_add PM: Adding info for No Bus:ttyba device: 'ttybb': device_add PM: Adding info for No Bus:ttybb device: 'ttybc': device_add PM: Adding info for No Bus:ttybc device: 'ttybd': device_add PM: Adding info for No Bus:ttybd device: 'ttybe': device_add PM: Adding info for No Bus:ttybe device: 'ttybf': device_add PM: Adding info for No Bus:ttybf device: 'ttyc0': device_add PM: Adding info for No Bus:ttyc0 device: 'ttyc1': device_add PM: Adding info for No Bus:ttyc1 device: 'ttyc2': device_add PM: Adding info for No Bus:ttyc2 device: 'ttyc3': device_add PM: Adding info for No Bus:ttyc3 device: 'ttyc4': device_add PM: Adding info for No Bus:ttyc4 device: 'ttyc5': device_add PM: Adding info for No Bus:ttyc5 device: 'ttyc6': device_add PM: Adding info for No Bus:ttyc6 device: 'ttyc7': device_add PM: Adding info for No Bus:ttyc7 device: 'ttyc8': device_add PM: Adding info for No Bus:ttyc8 device: 'ttyc9': device_add PM: Adding info for No Bus:ttyc9 device: 'ttyca': device_add PM: Adding info for No Bus:ttyca device: 'ttycb': device_add PM: Adding info for No Bus:ttycb device: 'ttycc': device_add PM: Adding info for No Bus:ttycc device: 'ttycd': device_add PM: Adding info for No Bus:ttycd device: 'ttyce': device_add PM: Adding info for No Bus:ttyce device: 'ttycf': device_add PM: Adding info for No Bus:ttycf device: 'ttyd0': device_add PM: Adding info for No Bus:ttyd0 device: 'ttyd1': device_add PM: Adding info for No Bus:ttyd1 device: 'ttyd2': device_add PM: Adding info for No Bus:ttyd2 device: 'ttyd3': device_add PM: Adding info for No Bus:ttyd3 device: 'ttyd4': device_add PM: Adding info for No Bus:ttyd4 device: 'ttyd5': device_add PM: Adding info for No Bus:ttyd5 device: 'ttyd6': device_add PM: Adding info for No Bus:ttyd6 device: 'ttyd7': device_add PM: Adding info for No Bus:ttyd7 device: 'ttyd8': device_add PM: Adding info for No Bus:ttyd8 device: 'ttyd9': device_add PM: Adding info for No Bus:ttyd9 device: 'ttyda': device_add PM: Adding info for No Bus:ttyda device: 'ttydb': device_add PM: Adding info for No Bus:ttydb device: 'ttydc': device_add PM: Adding info for No Bus:ttydc device: 'ttydd': device_add PM: Adding info for No Bus:ttydd device: 'ttyde': device_add PM: Adding info for No Bus:ttyde device: 'ttydf': device_add PM: Adding info for No Bus:ttydf device: 'ttye0': device_add PM: Adding info for No Bus:ttye0 device: 'ttye1': device_add PM: Adding info for No Bus:ttye1 device: 'ttye2': device_add PM: Adding info for No Bus:ttye2 device: 'ttye3': device_add PM: Adding info for No Bus:ttye3 device: 'ttye4': device_add PM: Adding info for No Bus:ttye4 device: 'ttye5': device_add PM: Adding info for No Bus:ttye5 device: 'ttye6': device_add PM: Adding info for No Bus:ttye6 device: 'ttye7': device_add PM: Adding info for No Bus:ttye7 device: 'ttye8': device_add PM: Adding info for No Bus:ttye8 device: 'ttye9': device_add PM: Adding info for No Bus:ttye9 device: 'ttyea': device_add PM: Adding info for No Bus:ttyea device: 'ttyeb': device_add PM: Adding info for No Bus:ttyeb device: 'ttyec': device_add PM: Adding info for No Bus:ttyec device: 'ttyed': device_add PM: Adding info for No Bus:ttyed device: 'ttyee': device_add PM: Adding info for No Bus:ttyee device: 'ttyef': device_add PM: Adding info for No Bus:ttyef device: 'ptmx': device_add PM: Adding info for No Bus:ptmx initcall pty_init+0x0/0x72d returned 0 after 3112055 usecs calling sysrq_init+0x0/0x53 @ 1 initcall sysrq_init+0x0/0x53 returned 0 after 34 usecs calling init+0x0/0x3d @ 1 bus: 'virtio': add driver virtio_console initcall init+0x0/0x3d returned 0 after 4020 usecs calling raw_init+0x0/0x10d @ 1 device class 'raw': registering device: 'rawctl': device_add PM: Adding info for No Bus:rawctl initcall raw_init+0x0/0x10d returned 0 after 9547 usecs calling lp_init_module+0x0/0x2ce @ 1 device class 'printer': registering lp: driver loaded but no devices found initcall lp_init_module+0x0/0x2ce returned 0 after 7176 usecs calling applicom_init+0x0/0x55d @ 1 Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ ac.o: No PCI boards found. ac.o: For an ISA board you must supply memory and irq parameters. initcall applicom_init+0x0/0x55d returned -6 after 13929 usecs initcall applicom_init+0x0/0x55d returned with error code -6 calling hpet_init+0x0/0x90 @ 1 device: 'hpet': device_add PM: Adding info for No Bus:hpet bus: 'acpi': add driver hpet initcall hpet_init+0x0/0x90 returned 0 after 8971 usecs calling nvram_init+0x0/0xa8 @ 1 device: 'nvram': device_add PM: Adding info for No Bus:nvram Non-volatile memory driver v1.3 initcall nvram_init+0x0/0xa8 returned 0 after 9005 usecs calling mod_init+0x0/0xe6 @ 1 initcall mod_init+0x0/0xe6 returned -19 after 314 usecs calling mod_init+0x0/0x75 @ 1 initcall mod_init+0x0/0x75 returned -19 after 0 usecs calling init+0x0/0x75 @ 1 bus: 'virtio': add driver virtio_rng initcall init+0x0/0x75 returned 0 after 3689 usecs calling ppdev_init+0x0/0xf0 @ 1 device class 'ppdev': registering ppdev: user-space parallel port driver initcall ppdev_init+0x0/0xf0 returned 0 after 7029 usecs calling pc8736x_gpio_init+0x0/0x42b @ 1 Registering platform device 'pc8736x_gpio.0'. Parent at platform device: 'pc8736x_gpio.0': device_add bus: 'platform': add device pc8736x_gpio.0 PM: Adding info for platform:pc8736x_gpio.0 platform pc8736x_gpio.0: __pm_runtime_idle()! platform pc8736x_gpio.0: __pm_runtime_idle() returns -11! platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing platform pc8736x_gpio.0: no device found PM: Removing info for platform:pc8736x_gpio.0 bus: 'platform': remove device pc8736x_gpio.0 initcall pc8736x_gpio_init+0x0/0x42b returned -19 after 44218 usecs calling nsc_gpio_init+0x0/0x3d @ 1 nsc_gpio initializing initcall nsc_gpio_init+0x0/0x3d returned 0 after 2013 usecs calling tlclk_init+0x0/0x20e @ 1 telclk_interrup = 0xf non-mcpbl0010 hw. initcall tlclk_init+0x0/0x20e returned -6 after 3643 usecs initcall tlclk_init+0x0/0x20e returned with error code -6 calling mwave_init+0x0/0x2b5 @ 1 smapi::smapi_init, ERROR invalid usSmapiID mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine mwave: mwavedd::mwave_init: Error: Failed to initialize board data mwave: mwavedd::mwave_init: Error: Failed to initialize initcall mwave_init+0x0/0x2b5 returned -5 after 22400 usecs initcall mwave_init+0x0/0x2b5 returned with error code -5 calling agp_init+0x0/0x51 @ 1 Linux agpgart interface v0.103 initcall agp_init+0x0/0x51 returned 0 after 2774 usecs calling agp_sis_init+0x0/0x60 @ 1 bus: 'pci': add driver agpgart-sis initcall agp_sis_init+0x0/0x60 returned 0 after 3548 usecs calling agp_via_init+0x0/0x55 @ 1 bus: 'pci': add driver agpgart-via initcall agp_via_init+0x0/0x55 returned 0 after 3538 usecs calling init_tis+0x0/0xbe @ 1 bus: 'pnp': add driver tpm_tis initcall init_tis+0x0/0xbe returned 0 after 3178 usecs calling init_nsc+0x0/0x7a7 @ 1 initcall init_nsc+0x0/0x7a7 returned -19 after 9 usecs calling init_atmel+0x0/0x1b6 @ 1 bus: 'platform': add driver tpm_atmel bus: 'platform': remove driver tpm_atmel driver: 'tpm_atmel': driver_release initcall init_atmel+0x0/0x1b6 returned -19 after 11186 usecs calling drm_core_init+0x0/0x170 @ 1 device class 'drm': registering [drm] Initialized drm 1.1.0 20060810 initcall drm_core_init+0x0/0x170 returned 0 after 6754 usecs calling ttm_init+0x0/0xa0 @ 1 device: 'ttm': device_add PM: Adding info for No Bus:ttm initcall ttm_init+0x0/0xa0 returned 0 after 5580 usecs calling tdfx_init+0x0/0x40 @ 1 initcall tdfx_init+0x0/0x40 returned 0 after 139 usecs calling r128_init+0x0/0x50 @ 1 initcall r128_init+0x0/0x50 returned 0 after 844 usecs calling radeon_init+0x0/0x100 @ 1 [drm] radeon defaulting to userspace modesetting. IOAPIC[0]: Set routing entry (1-16 -> 0x49 -> IRQ 16 Mode:1 Active:1) pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 device: 'card0': device_add PM: Adding info for No Bus:card0 [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0 initcall radeon_init+0x0/0x100 returned 0 after 37303 usecs calling mga_init+0x0/0x50 @ 1 initcall mga_init+0x0/0x50 returned 0 after 91 usecs calling savage_init+0x0/0x50 @ 1 initcall savage_init+0x0/0x50 returned 0 after 527 usecs calling via_init+0x0/0x4d @ 1 initcall via_init+0x0/0x4d returned 0 after 213 usecs calling serial8250_init+0x0/0x185 @ 1 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled Registering platform device 'serial8250'. Parent at platform device: 'serial8250': device_add bus: 'platform': add device serial8250 PM: Adding info for platform:serial8250 platform serial8250: __pm_runtime_idle()! platform serial8250: __pm_runtime_idle() returns -11! async_waiting @ 1 async_continuing @ 1 after 9 usec async_waiting @ 1 async_continuing @ 1 after 1 usec ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A device: 'ttyS0': device_add PM: Adding info for No Bus:ttyS0 async_waiting @ 1 async_continuing @ 1 after 1 usec async_waiting @ 1 async_continuing @ 1 after 1 usec serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A device: 'ttyS1': device_add PM: Adding info for No Bus:ttyS1 device: 'ttyS2': device_add PM: Adding info for No Bus:ttyS2 device: 'ttyS3': device_add PM: Adding info for No Bus:ttyS3 bus: 'platform': add driver serial8250 bus: 'platform': driver_probe_device: matched device serial8250 with driver serial8250 bus: 'platform': really_probe: probing driver serial8250 with device serial8250 driver: 'serial8250': driver_bound: bound to device 'serial8250' bus: 'platform': really_probe: bound device serial8250 to driver serial8250 serial8250 serial8250: __pm_runtime_idle()! serial8250 serial8250: __pm_runtime_idle() returns -11! initcall serial8250_init+0x0/0x185 returned 0 after 615785 usecs calling serial8250_pnp_init+0x0/0x40 @ 1 bus: 'pnp': add driver serial bus: 'pnp': driver_probe_device: matched device 00:09 with driver serial bus: 'pnp': really_probe: probing driver serial with device 00:09 device: 'ttyS1': device_unregister PM: Removing info for No Bus:ttyS1 device: 'ttyS1': device_create_release 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A device: 'ttyS1': device_add PM: Adding info for No Bus:ttyS1 driver: '00:09': driver_bound: bound to device 'serial' bus: 'pnp': really_probe: bound device 00:09 to driver serial serial 00:09: __pm_runtime_idle()! serial 00:09: __pm_runtime_idle() returns -11! bus: 'pnp': driver_probe_device: matched device 00:0a with driver serial bus: 'pnp': really_probe: probing driver serial with device 00:0a device: 'ttyS0': device_unregister PM: Removing info for No Bus:ttyS0 device: 'ttyS0': device_create_release 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A device: 'ttyS0': device_add PM: Adding info for No Bus:ttyS0 driver: '00:0a': driver_bound: bound to device 'serial' bus: 'pnp': really_probe: bound device 00:0a to driver serial serial 00:0a: __pm_runtime_idle()! serial 00:0a: __pm_runtime_idle() returns -11! initcall serial8250_pnp_init+0x0/0x40 returned 0 after 105398 usecs calling serial8250_pci_init+0x0/0x50 @ 1 bus: 'pci': add driver serial initcall serial8250_pci_init+0x0/0x50 returned 0 after 3138 usecs calling max3100_init+0x0/0x3d @ 1 bus: 'spi': add driver max3100 initcall max3100_init+0x0/0x3d returned 0 after 3159 usecs calling jsm_init_module+0x0/0x73 @ 1 bus: 'pci': add driver jsm initcall jsm_init_module+0x0/0x73 returned 0 after 3092 usecs calling init_kgdboc+0x0/0x50 @ 1 initcall init_kgdboc+0x0/0x50 returned 0 after 1 usecs calling parport_default_proc_register+0x0/0x50 @ 1 initcall parport_default_proc_register+0x0/0x50 returned 0 after 15 usecs calling parport_ax88796_init+0x0/0x40 @ 1 bus: 'platform': add driver ax88796-pp initcall parport_ax88796_init+0x0/0x40 returned 0 after 3842 usecs calling loop_init+0x0/0x1f5 @ 1 device: 'loop0': device_add PM: Adding info for No Bus:loop0 device: '7:0': device_add PM: Adding info for No Bus:7:0 device: 'loop1': device_add PM: Adding info for No Bus:loop1 device: '7:1': device_add PM: Adding info for No Bus:7:1 device: 'loop2': device_add PM: Adding info for No Bus:loop2 device: '7:2': device_add PM: Adding info for No Bus:7:2 device: 'loop3': device_add PM: Adding info for No Bus:loop3 device: '7:3': device_add PM: Adding info for No Bus:7:3 device: 'loop4': device_add PM: Adding info for No Bus:loop4 device: '7:4': device_add PM: Adding info for No Bus:7:4 device: 'loop5': device_add PM: Adding info for No Bus:loop5 device: '7:5': device_add PM: Adding info for No Bus:7:5 device: 'loop6': device_add PM: Adding info for No Bus:loop6 device: '7:6': device_add PM: Adding info for No Bus:7:6 device: 'loop7': device_add PM: Adding info for No Bus:loop7 device: '7:7': device_add PM: Adding info for No Bus:7:7 loop: module loaded initcall loop_init+0x0/0x1f5 returned 0 after 99100 usecs calling cpqarray_init+0x0/0x2ef @ 1 Compaq SMART2 Driver (v 2.6.0) bus: 'pci': add driver cpqarray bus: 'pci': remove driver cpqarray driver: 'cpqarray': driver_release initcall cpqarray_init+0x0/0x2ef returned -19 after 12922 usecs calling DAC960_init_module+0x0/0x7c @ 1 bus: 'pci': add driver DAC960 device: 'dac960_gam': device_add PM: Adding info for No Bus:dac960_gam initcall DAC960_init_module+0x0/0x7c returned 0 after 10269 usecs calling mm_init+0x0/0x200 @ 1 bus: 'pci': add driver umem MM: desc_per_page = 128 initcall mm_init+0x0/0x200 returned 0 after 5167 usecs calling nbd_init+0x0/0x3c0 @ 1 nbd: registered device at major 43 device: 'nbd0': device_add PM: Adding info for No Bus:nbd0 device: '43:0': device_add PM: Adding info for No Bus:43:0 device: 'nbd1': device_add PM: Adding info for No Bus:nbd1 device: '43:1': device_add PM: Adding info for No Bus:43:1 device: 'nbd2': device_add PM: Adding info for No Bus:nbd2 device: '43:2': device_add PM: Adding info for No Bus:43:2 device: 'nbd3': device_add PM: Adding info for No Bus:nbd3 device: '43:3': device_add PM: Adding info for No Bus:43:3 device: 'nbd4': device_add PM: Adding info for No Bus:nbd4 device: '43:4': device_add PM: Adding info for No Bus:43:4 device: 'nbd5': device_add PM: Adding info for No Bus:nbd5 device: '43:5': device_add PM: Adding info for No Bus:43:5 device: 'nbd6': device_add PM: Adding info for No Bus:nbd6 device: '43:6': device_add PM: Adding info for No Bus:43:6 device: 'nbd7': device_add PM: Adding info for No Bus:nbd7 device: '43:7': device_add PM: Adding info for No Bus:43:7 device: 'nbd8': device_add PM: Adding info for No Bus:nbd8 device: '43:8': device_add PM: Adding info for No Bus:43:8 device: 'nbd9': device_add PM: Adding info for No Bus:nbd9 device: '43:9': device_add PM: Adding info for No Bus:43:9 device: 'nbd10': device_add PM: Adding info for No Bus:nbd10 device: '43:10': device_add PM: Adding info for No Bus:43:10 device: 'nbd11': device_add PM: Adding info for No Bus:nbd11 device: '43:11': device_add PM: Adding info for No Bus:43:11 device: 'nbd12': device_add PM: Adding info for No Bus:nbd12 device: '43:12': device_add PM: Adding info for No Bus:43:12 device: 'nbd13': device_add PM: Adding info for No Bus:nbd13 device: '43:13': device_add PM: Adding info for No Bus:43:13 device: 'nbd14': device_add PM: Adding info for No Bus:nbd14 device: '43:14': device_add PM: Adding info for No Bus:43:14 device: 'nbd15': device_add PM: Adding info for No Bus:nbd15 device: '43:15': device_add PM: Adding info for No Bus:43:15 initcall nbd_init+0x0/0x3c0 returned 0 after 201823 usecs calling carm_init+0x0/0x50 @ 1 bus: 'pci': add driver sx8 initcall carm_init+0x0/0x50 returned 0 after 2873 usecs calling ub_init+0x0/0xc0 @ 1 bus: 'usb': add driver ub usbcore: registered new interface driver ub initcall ub_init+0x0/0xc0 returned 0 after 6794 usecs calling ibmasm_init+0x0/0xa0 @ 1 bus: 'pci': add driver ibmasm ibmasm: IBM ASM Service Processor Driver version 1.0 loaded initcall ibmasm_init+0x0/0xa0 returned 0 after 8488 usecs calling ics932s401_init+0x0/0x3d @ 1 bus: 'i2c': add driver ics932s401 i2c-core: driver [ics932s401] registered initcall ics932s401_init+0x0/0x3d returned 0 after 7163 usecs calling phantom_init+0x0/0x13a @ 1 device class 'phantom': registering bus: 'pci': add driver phantom Phantom Linux Driver, version n0.9.8, init OK initcall phantom_init+0x0/0x13a returned 0 after 11568 usecs calling ioc4_init+0x0/0x50 @ 1 bus: 'pci': add driver IOC4 initcall ioc4_init+0x0/0x50 returned 0 after 2943 usecs calling ilo_init+0x0/0xbc @ 1 device class 'iLO': registering bus: 'pci': add driver hpilo initcall ilo_init+0x0/0xbc returned 0 after 6382 usecs calling isl29003_init+0x0/0x3d @ 1 bus: 'i2c': add driver isl29003 i2c-core: driver [isl29003] registered initcall isl29003_init+0x0/0x3d returned 0 after 6805 usecs calling c2port_init+0x0/0x83 @ 1 Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti device class 'c2port': registering initcall c2port_init+0x0/0x83 returned 0 after 9309 usecs calling at24_init+0x0/0x60 @ 1 bus: 'i2c': add driver at24 i2c-core: driver [at24] registered initcall at24_init+0x0/0x60 returned 0 after 6146 usecs calling max6875_init+0x0/0x40 @ 1 bus: 'i2c': add driver max6875 i2c-core: driver [max6875] registered initcall max6875_init+0x0/0x40 returned 0 after 6643 usecs calling cb710_init_module+0x0/0x50 @ 1 bus: 'pci': add driver cb710 initcall cb710_init_module+0x0/0x50 returned 0 after 3037 usecs calling sm501_base_init+0x0/0x55 @ 1 bus: 'platform': add driver sm501 bus: 'pci': add driver sm501 initcall sm501_base_init+0x0/0x55 returned 0 after 6635 usecs calling raid_init+0x0/0x40 @ 1 device class 'raid_devices': registering initcall raid_init+0x0/0x40 returned 0 after 3983 usecs calling spi_transport_init+0x0/0xb0 @ 1 device class 'spi_transport': registering device class 'spi_host': registering initcall spi_transport_init+0x0/0xb0 returned 0 after 7886 usecs calling fc_transport_init+0x0/0x80 @ 1 device class 'fc_host': registering device class 'fc_vports': registering device class 'fc_remote_ports': registering device class 'fc_transport': registering initcall fc_transport_init+0x0/0x80 returned 0 after 15913 usecs calling iscsi_transport_init+0x0/0x182 @ 1 Loading iSCSI transport class v2.0-870. device class 'iscsi_transport': registering device class 'iscsi_endpoint': registering device class 'iscsi_host': registering device class 'iscsi_connection': registering device class 'iscsi_session': registering initcall iscsi_transport_init+0x0/0x182 returned 0 after 24739 usecs calling sas_transport_init+0x0/0xe6 @ 1 device class 'sas_host': registering device class 'sas_phy': registering device class 'sas_port': registering device class 'sas_device': registering device class 'sas_end_device': registering device class 'sas_expander': registering initcall sas_transport_init+0x0/0xe6 returned 0 after 23391 usecs calling sas_class_init+0x0/0x58 @ 1 initcall sas_class_init+0x0/0x58 returned 0 after 804 usecs calling scsi_dh_init+0x0/0x70 @ 1 initcall scsi_dh_init+0x0/0x70 returned 0 after 2 usecs calling hp_sw_init+0x0/0x3d @ 1 hp_sw: device handler registered initcall hp_sw_init+0x0/0x3d returned 0 after 2962 usecs calling alua_init+0x0/0x63 @ 1 alua: device handler registered initcall alua_init+0x0/0x63 returned 0 after 2860 usecs calling ahc_linux_init+0x0/0xa0 @ 1 bus: 'pci': add driver aic7xxx initcall ahc_linux_init+0x0/0xa0 returned 0 after 3250 usecs calling init_st+0x0/0x1e8 @ 1 st: Version 20081215, fixed bufsize 32768, s/g segs 256 device class 'scsi_tape': registering bus: 'scsi': add driver st initcall init_st+0x0/0x1e8 returned 0 after 11613 usecs calling init_osst+0x0/0x17b @ 1 osst :I: Tape driver with OnStream support version 0.99.4 osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ device class 'onstream_tape': registering bus: 'scsi': add driver osst initcall init_osst+0x0/0x17b returned 0 after 17613 usecs calling init_sd+0x0/0x152 @ 1 device class 'scsi_disk': registering bus: 'scsi': add driver sd initcall init_sd+0x0/0x152 returned 0 after 6831 usecs calling init_sr+0x0/0x71 @ 1 bus: 'scsi': add driver sr initcall init_sr+0x0/0x71 returned 0 after 2837 usecs calling init_sg+0x0/0xfd @ 1 device class 'scsi_generic': registering initcall init_sg+0x0/0xfd returned 0 after 4035 usecs calling init_ch_module+0x0/0xf0 @ 1 SCSI Media Changer driver v0.25 device class 'scsi_changer': registering bus: 'scsi': add driver ch initcall init_ch_module+0x0/0xf0 returned 0 after 10006 usecs calling ahci_init+0x0/0x50 @ 1 bus: 'pci': add driver ahci initcall ahci_init+0x0/0x50 returned 0 after 3000 usecs calling k2_sata_init+0x0/0x50 @ 1 bus: 'pci': add driver sata_svw initcall k2_sata_init+0x0/0x50 returned 0 after 3320 usecs calling piix_init+0x0/0x60 @ 1 bus: 'pci': add driver ata_piix initcall piix_init+0x0/0x60 returned 0 after 3294 usecs calling qs_ata_init+0x0/0x50 @ 1 bus: 'pci': add driver sata_qstor initcall qs_ata_init+0x0/0x50 returned 0 after 3565 usecs calling sil_init+0x0/0x50 @ 1 bus: 'pci': add driver sata_sil initcall sil_init+0x0/0x50 returned 0 after 3286 usecs calling nv_init+0x0/0x50 @ 1 bus: 'pci': add driver sata_nv initcall nv_init+0x0/0x50 returned 0 after 3210 usecs calling uli_init+0x0/0x45 @ 1 bus: 'pci': add driver sata_uli initcall uli_init+0x0/0x45 returned 0 after 3285 usecs calling mv_init+0x0/0x7b @ 1 bus: 'pci': add driver sata_mv bus: 'platform': add driver sata_mv initcall mv_init+0x0/0x7b returned 0 after 6894 usecs calling inic_init+0x0/0x50 @ 1 bus: 'pci': add driver sata_inic162x initcall inic_init+0x0/0x50 returned 0 after 3725 usecs calling amd_init+0x0/0x50 @ 1 bus: 'pci': add driver pata_amd initcall amd_init+0x0/0x50 returned 0 after 3299 usecs calling atp867x_init+0x0/0x50 @ 1 bus: 'pci': add driver pata_atp867x initcall atp867x_init+0x0/0x50 returned 0 after 3636 usecs calling cmd64x_init+0x0/0x50 @ 1 bus: 'pci': add driver pata_cmd64x initcall cmd64x_init+0x0/0x50 returned 0 after 3538 usecs calling hpt37x_init+0x0/0x50 @ 1 bus: 'pci': add driver pata_hpt37x initcall hpt37x_init+0x0/0x50 returned 0 after 3540 usecs calling hpt3x2n_init+0x0/0x50 @ 1 bus: 'pci': add driver pata_hpt3x2n initcall hpt3x2n_init+0x0/0x50 returned 0 after 3749 usecs calling it821x_init+0x0/0x50 @ 1 bus: 'pci': add driver pata_it821x initcall it821x_init+0x0/0x50 returned 0 after 3543 usecs calling jmicron_init+0x0/0x50 @ 1 bus: 'pci': add driver pata_jmicron initcall jmicron_init+0x0/0x50 returned 0 after 3621 usecs calling netcell_init+0x0/0x50 @ 1 bus: 'pci': add driver pata_netcell initcall netcell_init+0x0/0x50 returned 0 after 3625 usecs calling ninja32_init+0x0/0x50 @ 1 bus: 'pci': add driver pata_ninja32 initcall ninja32_init+0x0/0x50 returned 0 after 3626 usecs calling ns87415_init+0x0/0x50 @ 1 bus: 'pci': add driver pata_ns87415 initcall ns87415_init+0x0/0x50 returned 0 after 3630 usecs calling opti_init+0x0/0x50 @ 1 bus: 'pci': add driver pata_opti initcall opti_init+0x0/0x50 returned 0 after 3375 usecs calling optidma_init+0x0/0x50 @ 1 bus: 'pci': add driver pata_optidma initcall optidma_init+0x0/0x50 returned 0 after 3627 usecs calling mpiix_init+0x0/0x50 @ 1 bus: 'pci': add driver pata_mpiix initcall mpiix_init+0x0/0x50 returned 0 after 3573 usecs calling oldpiix_init+0x0/0x50 @ 1 bus: 'pci': add driver pata_oldpiix initcall oldpiix_init+0x0/0x50 returned 0 after 3629 usecs calling pdc2027x_init+0x0/0x50 @ 1 bus: 'pci': add driver pata_pdc2027x initcall pdc2027x_init+0x0/0x50 returned 0 after 3713 usecs calling pdc202xx_init+0x0/0x50 @ 1 bus: 'pci': add driver pata_pdc202xx_old initcall pdc202xx_init+0x0/0x50 returned 0 after 4051 usecs calling radisys_init+0x0/0x50 @ 1 bus: 'pci': add driver pata_radisys initcall radisys_init+0x0/0x50 returned 0 after 3746 usecs calling rdc_init+0x0/0x50 @ 1 bus: 'pci': add driver pata_rdc initcall rdc_init+0x0/0x50 returned 0 after 3765 usecs calling sc1200_init+0x0/0x50 @ 1 bus: 'pci': add driver sc1200 initcall sc1200_init+0x0/0x50 returned 0 after 3120 usecs calling via_init+0x0/0x50 @ 1 bus: 'pci': add driver pata_via bus: 'pci': driver_probe_device: matched device 0000:00:0f.1 with driver pata_via bus: 'pci': really_probe: probing driver pata_via with device 0000:00:0f.1 pata_via 0000:00:0f.1: version 0.3.4 IOAPIC[0]: Set routing entry (1-20 -> 0x51 -> IRQ 20 Mode:1 Active:1) pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pata_via 0000:00:0f.1: calling quirk_via_vlink+0x0/0x120 scsi0 : pata_via device: 'host0': device_add PM: Adding info for No Bus:host0 device: 'host0': device_add PM: Adding info for No Bus:host0 scsi1 : pata_via device: 'host1': device_add PM: Adding info for No Bus:host1 device: 'host1': device_add PM: Adding info for No Bus:host1 ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 driver: '0000:00:0f.1': driver_bound: bound to device 'pata_via' bus: 'pci': really_probe: bound device 0000:00:0f.1 to driver pata_via pata_via 0000:00:0f.1: __pm_runtime_idle()! pata_via 0000:00:0f.1: __pm_runtime_idle() returns -11! calling 2_async_port_probe+0x0/0x110 @ 1684 calling 3_async_port_probe+0x0/0x110 @ 1685 async_waiting @ 1685 initcall via_init+0x0/0x50 returned 0 after 245345 usecs calling sl82c105_init+0x0/0x50 @ 1 bus: 'pci': add driver pata_sl82c105 initcall sl82c105_init+0x0/0x50 returned 0 after 3736 usecs calling sis_init+0x0/0x50 @ 1 bus: 'pci': add driver pata_sis initcall sis_init+0x0/0x50 returned 0 after 3366 usecs calling triflex_init+0x0/0x50 @ 1 bus: 'pci': add driver pata_triflex initcall triflex_init+0x0/0x50 returned 0 after 3616 usecs calling sch_init+0x0/0x50 @ 1 bus: 'pci': add driver pata_sch initcall sch_init+0x0/0x50 returned 0 after 3366 usecs calling pacpi_init+0x0/0x50 @ 1 bus: 'pci': add driver pata_acpi initcall pacpi_init+0x0/0x50 returned 0 after 3372 usecs calling butterfly_init+0x0/0x40 @ 1 initcall butterfly_init+0x0/0x40 returned 0 after 2 usecs calling init_spi_lm70llp+0x0/0x3d @ 1 initcall init_spi_lm70llp+0x0/0x3d returned 0 after 1 usecs calling spidev_init+0x0/0xe3 @ 1 device class 'spidev': registering bus: 'spi': add driver spidev initcall spidev_init+0x0/0xe3 returned 0 after 6672 usecs calling e1000_init_module+0x0/0xab @ 1 Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI Copyright (c) 1999-2006 Intel Corporation. bus: 'pci': add driver e1000 initcall e1000_init_module+0x0/0xab returned 0 after 11882 usecs calling e1000_init_module+0x0/0x95 @ 1 e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. bus: 'pci': add driver e1000e initcall e1000_init_module+0x0/0x95 returned 0 after 12158 usecs calling igb_init_module+0x0/0x8d @ 1 Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2 Copyright (c) 2007-2009 Intel Corporation. bus: 'pci': add driver igb async_waiting @ 1684 async_continuing @ 1684 after 1 usec initcall 2_async_port_probe+0x0/0x110 returned 0 after 175371 usecs async_continuing @ 1685 after 174580 usec initcall igb_init_module+0x0/0x8d returned 0 after 38116 usecs calling igbvf_init_module+0x0/0x93 @ 1 Intel(R) Virtual Function Network Driver - version 1.0.0-k0 Copyright (c) 2009 Intel Corporation. bus: 'pci': add driver igbvf initcall igbvf_init_module+0x0/0x93 returned 0 after 11630 usecs calling bonding_init+0x0/0xa50 @ 1 Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008) bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. device: 'bond0': device_add PM: Adding info for No Bus:bond0 initcall bonding_init+0x0/0xa50 returned 0 after 27796 usecs calling atl1c_init_module+0x0/0x50 @ 1 bus: 'pci': add driver atl1c initcall atl1c_init_module+0x0/0x50 returned 0 after 3160 usecs calling plip_init+0x0/0x97 @ 1 initcall plip_init+0x0/0x97 returned 0 after 2 usecs calling happy_meal_probe+0x0/0x50 @ 1 bus: 'pci': add driver hme initcall happy_meal_probe+0x0/0x50 returned 0 after 2961 usecs calling gem_init+0x0/0x45 @ 1 bus: 'pci': add driver gem initcall gem_init+0x0/0x45 returned 0 after 2861 usecs calling vortex_init+0x0/0xeb @ 1 bus: 'pci': add driver 3c59x initcall vortex_init+0x0/0xeb returned 0 after 3032 usecs calling typhoon_init+0x0/0x45 @ 1 bus: 'pci': add driver typhoon initcall typhoon_init+0x0/0x45 returned 0 after 3205 usecs calling e100_init_module+0x0/0x8b @ 1 e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation bus: 'pci': add driver e100 initcall e100_init_module+0x0/0x8b returned 0 after 11795 usecs calling epic_init+0x0/0x50 @ 1 bus: 'pci': add driver epic100 initcall epic_init+0x0/0x50 returned 0 after 14590 usecs calling sis190_init_module+0x0/0x50 @ 1 bus: 'pci': add driver sis190 initcall sis190_init_module+0x0/0x50 returned 0 after 3532 usecs calling yellowfin_init+0x0/0x50 @ 1 bus: 'pci': add driver yellowfin initcall yellowfin_init+0x0/0x50 returned 0 after 3511 usecs calling acenic_init+0x0/0x50 @ 1 bus: 'pci': add driver acenic initcall acenic_init+0x0/0x50 returned 0 after 3641 usecs calling natsemi_init_mod+0x0/0x50 @ 1 bus: 'pci': add driver natsemi ata2.01: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100 ata2.01: 488397168 sectors, multi 16: LBA48 initcall natsemi_init_mod+0x0/0x50 returned 0 after 12314 usecs calling ns83820_init+0x0/0x60 @ 1 ns83820.c: National Semiconductor DP83820 10/100/1000 driver. bus: 'pci': add driver ns83820 initcall ns83820_init+0x0/0x60 returned 0 after 8754 usecs calling tg3_init+0x0/0x45 @ 1 bus: 'pci': add driver tg3 initcall tg3_init+0x0/0x45 returned 0 after 3117 usecs calling skge_init_module+0x0/0x8b @ 1 bus: 'pci': add driver skge bus: 'pci': driver_probe_device: matched device 0000:00:0a.0 with driver skge bus: 'pci': really_probe: probing driver skge with device 0000:00:0a.0 IOAPIC[0]: Set routing entry (1-17 -> 0x59 -> IRQ 17 Mode:1 Active:1) skge 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 skge 0000:00:0a.0: PCI: Disallowing DAC for device skge 1.13 addr 0xfd900000 irq 17 chip Yukon rev 1 device: 'eth0': device_add PM: Adding info for No Bus:eth0 skge eth0: addr 00:0c:6e:b3:3d:c6 driver: '0000:00:0a.0': driver_bound: bound to device 'skge' bus: 'pci': really_probe: bound device 0000:00:0a.0 to driver skge skge 0000:00:0a.0: __pm_runtime_idle()! skge 0000:00:0a.0: __pm_runtime_idle() returns -11! initcall skge_init_module+0x0/0x8b returned 0 after 66030 usecs calling sky2_init_module+0x0/0x90 @ 1 sky2 driver version 1.25 bus: 'pci': add driver sky2 ata2.01: configured for UDMA/100 async_waiting @ 1685 async_continuing @ 1685 after 1 usec scsi 1:0:1:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5 device: 'target1:0:1': device_add PM: Adding info for No Bus:target1:0:1 device: '1:0:1:0': device_add bus: 'scsi': add device 1:0:1:0 PM: Adding info for scsi:1:0:1:0 initcall sky2_init_module+0x0/0x90 returned 0 after 36829 usecs calling ks8842_init+0x0/0x3d @ 1 bus: 'platform': add driver ks8842 initcall ks8842_init+0x0/0x3d returned 0 after 3657 usecs calling rhine_init+0x0/0x94 @ 1 bus: 'pci': add driver via-rhine bus: 'scsi': driver_probe_device: matched device 1:0:1:0 with driver st bus: 'scsi': really_probe: probing driver st with device 1:0:1:0 bus: 'scsi': driver_probe_device: matched device 1:0:1:0 with driver osst bus: 'scsi': really_probe: probing driver osst with device 1:0:1:0 bus: 'scsi': driver_probe_device: matched device 1:0:1:0 with driver sd bus: 'scsi': really_probe: probing driver sd with device 1:0:1:0 device: '1:0:1:0': device_add PM: Adding info for No Bus:1:0:1:0 initcall rhine_init+0x0/0x94 returned 0 after 46279 usecs calling velocity_init_module+0x0/0x6f @ 1 bus: 'pci': add driver via-velocity initcall velocity_init_module+0x0/0x6f returned 0 after 3753 usecs calling starfire_init+0x0/0x50 @ 1 bus: 'pci': add driver starfire initcall starfire_init+0x0/0x50 returned 0 after 3272 usecs calling marvell_init+0x0/0x9d @ 1 bus: 'mdio_bus': add driver Marvell 88E1101 driver: '1:0:1:0': driver_bound: bound to device 'sd' bus: 'scsi': really_probe: bound device 1:0:1:0 to driver sd sd 1:0:1:0: __pm_runtime_idle()! sd 1:0:1:0: __pm_runtime_idle() returns -11! device: '1:0:1:0': device_add PM: Adding info for No Bus:1:0:1:0 calling 4_sd_probe_async+0x0/0x240 @ 1684 sd 1:0:1:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) bus: 'mdio_bus': add driver Marvell 88E1112 bus: 'mdio_bus': add driver Marvell 88E1111 sd 1:0:1:0: [sda] Write Protect is off sd 1:0:1:0: [sda] Mode Sense: 00 3a 00 00 bus: 'mdio_bus': add driver Marvell 88E1118 sd 1:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA device: 'sda': device_add PM: Adding info for No Bus:sda bus: 'mdio_bus': add driver Marvell 88E1121R bus: 'mdio_bus': add driver Marvell 88E1145 device: 'sg0': device_add PM: Adding info for No Bus:sg0 bus: 'mdio_bus': add driver Marvell 88E1240 sd 1:0:1:0: Attached scsi generic sg0 type 0 initcall 3_async_port_probe+0x0/0x110 returned 0 after 750551 usecs sda:initcall marvell_init+0x0/0x9d returned 0 after 104299 usecs calling davicom_init+0x0/0x85 @ 1 bus: 'mdio_bus': add driver Davicom DM9161E sda1 sda2 bus: 'mdio_bus': add driver Davicom DM9161A bus: 'mdio_bus': add driver Davicom DM9131 initcall davicom_init+0x0/0x85 returned 0 after 14226 usecs calling cicada_init+0x0/0x6e @ 1 bus: 'mdio_bus': add driver Cicada Cis8204 device: 'sda1': device_add PM: Adding info for No Bus:sda1 device: 'sda2': device_add PM: Adding info for No Bus:sda2 bus: 'mdio_bus': add driver Cicada Cis8201 initcall cicada_init+0x0/0x6e returned 0 after 20231 usecs calling qs6612_init+0x0/0x3d @ 1 bus: 'mdio_bus': add driver QS6612 initcall qs6612_init+0x0/0x3d returned 0 after 3842 usecs calling smsc_init+0x0/0xc8 @ 1 bus: 'mdio_bus': add driver SMSC LAN83C185 bus: 'mdio_bus': add driver SMSC LAN8187 device: '8:0': device_add PM: Adding info for No Bus:8:0 bus: 'mdio_bus': add driver SMSC LAN8700 sd 1:0:1:0: [sda] Attached SCSI disk initcall 4_sd_probe_async+0x0/0x240 returned 0 after 168202 usecs bus: 'mdio_bus': add driver SMSC LAN911x Internal PHY bus: 'mdio_bus': add driver SMSC LAN8710/LAN8720 initcall smsc_init+0x0/0xc8 returned 0 after 39520 usecs calling vsc82xx_init+0x0/0x67 @ 1 bus: 'mdio_bus': add driver Vitesse VSC8244 bus: 'mdio_bus': add driver Vitesse VSC8221 initcall vsc82xx_init+0x0/0x67 returned 0 after 8607 usecs calling broadcom_init+0x0/0x174 @ 1 bus: 'mdio_bus': add driver Broadcom BCM5411 bus: 'mdio_bus': add driver Broadcom BCM5421 bus: 'mdio_bus': add driver Broadcom BCM5461 bus: 'mdio_bus': add driver Broadcom BCM5464 bus: 'mdio_bus': add driver Broadcom BCM5481 bus: 'mdio_bus': add driver Broadcom BCM5482 bus: 'mdio_bus': add driver Broadcom BCM50610 bus: 'mdio_bus': add driver Broadcom BCM50610M bus: 'mdio_bus': add driver Broadcom BCM57780 bus: 'mdio_bus': add driver Broadcom BCMAC131 initcall broadcom_init+0x0/0x174 returned 0 after 44813 usecs calling ip175c_init+0x0/0x40 @ 1 bus: 'mdio_bus': add driver ICPlus IP175C initcall ip175c_init+0x0/0x40 returned 0 after 4078 usecs calling realtek_init+0x0/0x40 @ 1 bus: 'mdio_bus': add driver RTL821x Gigabit Ethernet initcall realtek_init+0x0/0x40 returned 0 after 5015 usecs calling ns_init+0x0/0x40 @ 1 bus: 'mdio_bus': add driver NatSemi DP83865 initcall ns_init+0x0/0x40 returned 0 after 4255 usecs calling sundance_init+0x0/0x50 @ 1 bus: 'pci': add driver sundance initcall sundance_init+0x0/0x50 returned 0 after 3305 usecs calling hamachi_init+0x0/0x50 @ 1 bus: 'pci': add driver hamachi initcall hamachi_init+0x0/0x50 returned 0 after 3198 usecs calling net_olddevs_init+0x0/0xcb @ 1 initcall net_olddevs_init+0x0/0xcb returned 0 after 5 usecs calling sb1000_init+0x0/0x3d @ 1 bus: 'pnp': add driver sb1000 initcall sb1000_init+0x0/0x3d returned 0 after 3082 usecs calling b44_init+0x0/0x93 @ 1 bus: 'pci': add driver b44 bus: 'ssb': add driver b44 initcall b44_init+0x0/0x93 returned 0 after 5796 usecs calling init_nic+0x0/0x50 @ 1 bus: 'pci': add driver forcedeth initcall init_nic+0x0/0x50 returned 0 after 3381 usecs calling ql3xxx_init_module+0x0/0x45 @ 1 bus: 'pci': add driver qla3xxx initcall ql3xxx_init_module+0x0/0x45 returned 0 after 3195 usecs calling ppp_init+0x0/0x117 @ 1 PPP generic driver version 2.4.2 device class 'ppp': registering device: 'ppp': device_add PM: Adding info for No Bus:ppp initcall ppp_init+0x0/0x117 returned 0 after 12170 usecs calling ppp_async_init+0x0/0x5e @ 1 initcall ppp_async_init+0x0/0x5e returned 0 after 1 usecs calling ppp_sync_init+0x0/0x5e @ 1 initcall ppp_sync_init+0x0/0x5e returned 0 after 1 usecs calling deflate_init+0x0/0x63 @ 1 PPP Deflate Compression module registered initcall deflate_init+0x0/0x63 returned 0 after 3740 usecs calling bsdcomp_init+0x0/0x5e @ 1 PPP BSD Compression module registered initcall bsdcomp_init+0x0/0x5e returned 0 after 3385 usecs calling pppox_init+0x0/0x3d @ 1 NET: Registered protocol family 24 initcall pppox_init+0x0/0x3d returned 0 after 3113 usecs calling pppoe_init+0x0/0xbf @ 1 initcall pppoe_init+0x0/0xbf returned 0 after 54 usecs calling pppol2tp_init+0x0/0xa8 @ 1 PPPoL2TP kernel driver, V1.0 initcall pppol2tp_init+0x0/0xa8 returned 0 after 2631 usecs calling dummy_init_module+0x0/0x120 @ 1 device: 'dummy0': device_add PM: Adding info for No Bus:dummy0 initcall dummy_init_module+0x0/0x120 returned 0 after 6917 usecs calling ifb_init_module+0x0/0x11d @ 1 device: 'ifb0': device_add PM: Adding info for No Bus:ifb0 device: 'ifb1': device_add PM: Adding info for No Bus:ifb1 initcall ifb_init_module+0x0/0x11d returned 0 after 12726 usecs calling de600_init+0x0/0x3a3 @ 1 eth%d: D-Link DE-600 pocket adapter: not at I/O 0x378. initcall de600_init+0x0/0x3a3 returned -19 after 4918 usecs calling cp_init+0x0/0x50 @ 1 bus: 'pci': add driver 8139cp initcall cp_init+0x0/0x50 returned 0 after 3161 usecs calling rtl8139_init_module+0x0/0x50 @ 1 bus: 'pci': add driver 8139too initcall rtl8139_init_module+0x0/0x50 returned 0 after 3200 usecs calling atp_init_module+0x0/0xd8 @ 1 atp.c:v1.09=ac 2002/10/01 Donald Becker initcall atp_init_module+0x0/0xd8 returned -19 after 5175 usecs calling eql_init_module+0x0/0x89 @ 1 Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com) device: 'eql': device_add PM: Adding info for No Bus:eql initcall eql_init_module+0x0/0x89 returned 0 after 13355 usecs calling amd8111e_init+0x0/0x50 @ 1 bus: 'pci': add driver amd8111e initcall amd8111e_init+0x0/0x50 returned 0 after 3295 usecs calling ethoc_init+0x0/0x40 @ 1 bus: 'platform': add driver ethoc initcall ethoc_init+0x0/0x40 returned 0 after 3411 usecs calling dnet_init+0x0/0x40 @ 1 bus: 'platform': add driver dnet initcall dnet_init+0x0/0x40 returned 0 after 3327 usecs calling olympic_pci_init+0x0/0x50 @ 1 bus: 'pci': add driver olympic initcall olympic_pci_init+0x0/0x50 returned 0 after 3193 usecs calling kaweth_init+0x0/0x45 @ 1 bus: 'usb': add driver kaweth usbcore: registered new interface driver kaweth initcall kaweth_init+0x0/0x45 returned 0 after 7409 usecs calling hso_init+0x0/0x21b @ 1 hso: drivers/net/usb/hso.c: 1.2 Option Wireless bus: 'usb': add driver hso usbcore: registered new interface driver hso initcall hso_init+0x0/0x21b returned 0 after 11185 usecs calling usbpn_init+0x0/0x50 @ 1 bus: 'usb': add driver cdc_phonet usbcore: registered new interface driver cdc_phonet initcall usbpn_init+0x0/0x50 returned 0 after 8571 usecs calling dmfe_init_module+0x0/0x120 @ 1 dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) bus: 'pci': add driver dmfe initcall dmfe_init_module+0x0/0x120 returned 0 after 8254 usecs calling w840_init+0x0/0x60 @ 1 winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker http://www.scyld.com/network/drivers.html bus: 'pci': add driver winbond-840 initcall w840_init+0x0/0x60 returned 0 after 14254 usecs calling tulip_init+0x0/0x60 @ 1 bus: 'pci': add driver tulip initcall tulip_init+0x0/0x60 returned 0 after 3028 usecs calling de4x5_module_init+0x0/0x50 @ 1 bus: 'pci': add driver de4x5 initcall de4x5_module_init+0x0/0x50 returned 0 after 3026 usecs calling uli526x_init_module+0x0/0xd0 @ 1 uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) bus: 'pci': add driver uli526x initcall uli526x_init_module+0x0/0xd0 returned 0 after 8676 usecs calling mkiss_init_driver+0x0/0x6a @ 1 mkiss: AX.25 Multikiss, Hans Albas PE1AYX initcall mkiss_init_driver+0x0/0x6a returned 0 after 3705 usecs calling bpq_init_driver+0x0/0x8c @ 1 AX.25: bpqether driver version 004 initcall bpq_init_driver+0x0/0x8c returned 0 after 3148 usecs calling init_baycomserfdx+0x0/0x135 @ 1 baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA baycom_ser_fdx: version 0.10 compiled 11:54:34 Sep 30 2009 device: 'bcsf0': device_add PM: Adding info for No Bus:bcsf0 device: 'bcsf1': device_add PM: Adding info for No Bus:bcsf1 device: 'bcsf2': device_add PM: Adding info for No Bus:bcsf2 device: 'bcsf3': device_add PM: Adding info for No Bus:bcsf3 initcall init_baycomserfdx+0x0/0x135 returned 0 after 36496 usecs calling hdlcdrv_init_driver+0x0/0x50 @ 1 hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA hdlcdrv: version 0.8 compiled 11:54:34 Sep 30 2009 initcall hdlcdrv_init_driver+0x0/0x50 returned 0 after 8850 usecs calling init_baycomserhdx+0x0/0x118 @ 1 baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA baycom_ser_hdx: version 0.10 compiled 11:54:35 Sep 30 2009 device: 'bcsh0': device_add PM: Adding info for No Bus:bcsh0 device: 'bcsh1': device_add PM: Adding info for No Bus:bcsh1 device: 'bcsh2': device_add PM: Adding info for No Bus:bcsh2 device: 'bcsh3': device_add PM: Adding info for No Bus:bcsh3 initcall init_baycomserhdx+0x0/0x118 returned 0 after 36455 usecs calling smsc_ircc_init+0x0/0x69c @ 1 bus: 'platform': add driver smsc-ircc2 bus: 'platform': remove driver smsc-ircc2 driver: 'smsc-ircc2': driver_release initcall smsc_ircc_init+0x0/0x69c returned -19 after 11922 usecs calling vlsi_mod_init+0x0/0x180 @ 1 bus: 'pci': add driver vlsi_ir initcall vlsi_mod_init+0x0/0x180 returned 0 after 3238 usecs calling via_ircc_init+0x0/0x90 @ 1 bus: 'pci': add driver via-ircc initcall via_ircc_init+0x0/0x90 returned 0 after 3282 usecs calling mcs_init+0x0/0x80 @ 1 bus: 'usb': add driver mcs7780 usbcore: registered new interface driver mcs7780 initcall mcs_init+0x0/0x80 returned 0 after 7574 usecs calling irtty_sir_init+0x0/0x69 @ 1 initcall irtty_sir_init+0x0/0x69 returned 0 after 1 usecs calling sir_wq_init+0x0/0x67 @ 1 initcall sir_wq_init+0x0/0x67 returned 0 after 107 usecs calling kingsun_init+0x0/0x50 @ 1 bus: 'usb': add driver kingsun-sir usbcore: registered new interface driver kingsun-sir initcall kingsun_init+0x0/0x50 returned 0 after 8205 usecs calling ksdazzle_init+0x0/0x50 @ 1 bus: 'usb': add driver ksdazzle-sir usbcore: registered new interface driver ksdazzle-sir initcall ksdazzle_init+0x0/0x50 returned 0 after 8438 usecs calling ks959_init+0x0/0x50 @ 1 bus: 'usb': add driver ks959-sir usbcore: registered new interface driver ks959-sir initcall ks959_init+0x0/0x50 returned 0 after 7886 usecs calling init_netconsole+0x0/0x293 @ 1 console [netcon0] enabled netconsole: network logging started initcall init_netconsole+0x0/0x293 returned 0 after 5601 usecs calling init+0x0/0x40 @ 1 bus: 'virtio': add driver virtio_net initcall init+0x0/0x40 returned 0 after 3684 usecs calling i2400m_driver_init+0x0/0x30 @ 1 initcall i2400m_driver_init+0x0/0x30 returned 0 after 0 usecs calling i2400ms_driver_init+0x0/0x40 @ 1 bus: 'sdio': add driver i2400m_sdio async/1 used greatest stack depth: 4632 bytes left initcall i2400ms_driver_init+0x0/0x40 returned 0 after 8176 usecs calling zatm_init_module+0x0/0x45 @ 1 bus: 'pci': add driver zatm initcall zatm_init_module+0x0/0x45 returned 0 after 2948 usecs calling uPD98402_module_init+0x0/0x2d @ 1 initcall uPD98402_module_init+0x0/0x2d returned 0 after 0 usecs calling amb_module_init+0x0/0x210 @ 1 Madge ATM Ambassador driver version 1.2.4 amb: debug bitmap is 0 bus: 'pci': add driver amb initcall amb_module_init+0x0/0x210 returned 0 after 8762 usecs calling hrz_module_init+0x0/0x101 @ 1 Madge ATM Horizon [Ultra] driver version 1.2.1 hrz: debug bitmap is 0 bus: 'pci': add driver horizon initcall hrz_module_init+0x0/0x101 returned 0 after 9430 usecs calling ia_module_init+0x0/0x8d @ 1 bus: 'pci': add driver ia initcall ia_module_init+0x0/0x8d returned 0 after 2786 usecs calling idt77252_init+0x0/0x70 @ 1 idt77252_init: at ffffffff826dd600 bus: 'pci': add driver idt77252 initcall idt77252_init+0x0/0x70 returned 0 after 6398 usecs calling solos_pci_init+0x0/0x55 @ 1 Solos PCI Driver Version 0.07 bus: 'pci': add driver solos async/0 used greatest stack depth: 4080 bytes left initcall solos_pci_init+0x0/0x55 returned 0 after 10336 usecs calling adummy_init+0x0/0xdb @ 1 adummy: version 1.0 device: 'adummy0': device_add PM: Adding info for No Bus:adummy0 initcall adummy_init+0x0/0xdb returned 0 after 8473 usecs calling atmtcp_init+0x0/0x3d @ 1 initcall atmtcp_init+0x0/0x3d returned 0 after 18 usecs calling lanai_module_init+0x0/0x63 @ 1 bus: 'pci': add driver lanai initcall lanai_module_init+0x0/0x63 returned 0 after 3025 usecs calling i2o_iop_init+0x0/0x7a @ 1 I2O subsystem v1.325 i2o: max drivers = 8 bus: 'i2o': registered bus: 'i2o': add driver exec-osm bus: 'pci': add driver PCI_I2O initcall i2o_iop_init+0x0/0x7a returned 0 after 13266 usecs calling i2o_bus_init+0x0/0x6a @ 1 I2O Bus Adapter OSM v1.317 bus: 'i2o': add driver bus-osm initcall i2o_bus_init+0x0/0x6a returned 0 after 5695 usecs calling i2o_scsi_init+0x0/0x79 @ 1 I2O SCSI Peripheral OSM v1.316 bus: 'i2o': add driver scsi-osm initcall i2o_scsi_init+0x0/0x79 returned 0 after 6027 usecs calling i2o_proc_init+0x0/0x236 @ 1 I2O ProcFS OSM v1.316 bus: 'i2o': add driver proc-osm initcall i2o_proc_init+0x0/0x236 returned 0 after 5275 usecs calling fusion_init+0x0/0x165 @ 1 Fusion MPT base driver 3.04.12 Copyright (c) 1999-2008 LSI Corporation initcall fusion_init+0x0/0x165 returned 0 after 6382 usecs calling mptspi_init+0x0/0x102 @ 1 Fusion MPT SPI Host driver 3.04.12 bus: 'pci': add driver mptspi initcall mptspi_init+0x0/0x102 returned 0 after 6248 usecs calling mptfc_init+0x0/0x11f @ 1 Fusion MPT FC Host driver 3.04.12 bus: 'pci': add driver mptfc initcall mptfc_init+0x0/0x11f returned 0 after 6115 usecs calling mptsas_init+0x0/0x130 @ 1 Fusion MPT SAS Host driver 3.04.12 bus: 'pci': add driver mptsas initcall mptsas_init+0x0/0x130 returned 0 after 6261 usecs calling mptctl_init+0x0/0x154 @ 1 Fusion MPT misc device (ioctl) driver 3.04.12 device: 'mptctl': device_add PM: Adding info for No Bus:mptctl mptctl: Registered with Fusion MPT base driver mptctl: /dev/mptctl @ (major,minor=10,220) initcall mptctl_init+0x0/0x154 returned 0 after 18304 usecs calling fw_core_init+0x0/0xc0 @ 1 bus: 'firewire': registered initcall fw_core_init+0x0/0xc0 returned 0 after 3148 usecs calling fw_ohci_init+0x0/0x50 @ 1 bus: 'pci': add driver firewire_ohci bus: 'pci': driver_probe_device: matched device 0000:00:07.0 with driver firewire_ohci bus: 'pci': really_probe: probing driver firewire_ohci with device 0000:00:07.0 firewire_ohci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 firewire_ohci 0000:00:07.0: calling quirk_via_vlink+0x0/0x120 firewire_ohci: Added fw-ohci device 0000:00:07.0, OHCI version 1.0 driver: '0000:00:07.0': driver_bound: bound to device 'firewire_ohci' bus: 'pci': really_probe: bound device 0000:00:07.0 to driver firewire_ohci firewire_ohci 0000:00:07.0: __pm_runtime_idle()! firewire_ohci 0000:00:07.0: __pm_runtime_idle() returns -11! initcall fw_ohci_init+0x0/0x50 returned 0 after 129247 usecs calling sbp2_init+0x0/0x6d @ 1 bus: 'firewire': add driver sbp2 initcall sbp2_init+0x0/0x6d returned 0 after 3530 usecs calling fwnet_init+0x0/0xa3 @ 1 bus: 'firewire': add driver net initcall fwnet_init+0x0/0xa3 returned 0 after 7906 usecs calling init_raw1394+0x0/0x116 @ 1 device: 'raw1394': device_add PM: Adding info for No Bus:raw1394 ieee1394: raw1394: /dev/raw1394 device initialized bus: 'ieee1394': add driver raw1394 initcall init_raw1394+0x0/0x116 returned 0 after 14551 usecs calling sbp2_module_init+0x0/0xa0 @ 1 bus: 'ieee1394': add driver sbp2 initcall sbp2_module_init+0x0/0xa0 returned 0 after 3456 usecs calling ether1394_init_module+0x0/0x96 @ 1 bus: 'ieee1394': add driver eth1394 initcall ether1394_init_module+0x0/0x96 returned 0 after 4511 usecs calling cdrom_init+0x0/0x9b @ 1 initcall cdrom_init+0x0/0x9b returned 0 after 14 usecs calling uwb_subsys_init+0x0/0x80 @ 1 device class 'uwb_rc': registering initcall uwb_subsys_init+0x0/0x80 returned 0 after 3562 usecs calling hwarc_driver_init+0x0/0x50 @ 1 bus: 'usb': add driver hwa-rc usbcore: registered new interface driver hwa-rc initcall hwarc_driver_init+0x0/0x50 returned 0 after 7480 usecs calling mon_init+0x0/0x14d @ 1 device class 'usbmon': registering device: 'usbmon0': device_add PM: Adding info for No Bus:usbmon0 initcall mon_init+0x0/0x14d returned 0 after 10069 usecs calling ehci_hcd_init+0x0/0xf0 @ 1 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver bus: 'pci': add driver ehci_hcd bus: 'pci': driver_probe_device: matched device 0000:00:10.4 with driver ehci_hcd bus: 'pci': really_probe: probing driver ehci_hcd with device 0000:00:10.4 IOAPIC[0]: Set routing entry (1-21 -> 0x61 -> IRQ 21 Mode:1 Active:1) ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:10.4: calling quirk_via_vlink+0x0/0x120 ehci_hcd 0000:00:10.4: EHCI Host Controller device: 'usbmon1': device_add PM: Adding info for No Bus:usbmon1 ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: irq 21, io mem 0xfdf00000 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 device: 'usb1': device_add bus: 'usb': add device usb1 PM: Adding info for usb:usb1 bus: 'usb': driver_probe_device: matched device usb1 with driver usb bus: 'usb': really_probe: probing driver usb with device usb1 usb usb1: configuration #1 chosen from 1 choice device: '1-0:1.0': device_add bus: 'usb': add device 1-0:1.0 PM: Adding info for usb:1-0:1.0 bus: 'usb': driver_probe_device: matched device 1-0:1.0 with driver hub bus: 'usb': really_probe: probing driver hub with device 1-0:1.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected driver: '1-0:1.0': driver_bound: bound to device 'hub' bus: 'usb': really_probe: bound device 1-0:1.0 to driver hub hub 1-0:1.0: __pm_runtime_idle()! hub 1-0:1.0: __pm_runtime_idle() returns -11! device: 'ep_81': device_add PM: Adding info for No Bus:ep_81 device: 'usbdev1.1': device_add PM: Adding info for No Bus:usbdev1.1 driver: 'usb1': driver_bound: bound to device 'usb' bus: 'usb': really_probe: bound device usb1 to driver usb usb usb1: __pm_runtime_idle()! usb usb1: __pm_runtime_idle() returns -11! device: 'ep_00': device_add PM: Adding info for No Bus:ep_00 driver: '0000:00:10.4': driver_bound: bound to device 'ehci_hcd' bus: 'pci': really_probe: bound device 0000:00:10.4 to driver ehci_hcd ehci_hcd 0000:00:10.4: __pm_runtime_idle()! ehci_hcd 0000:00:10.4: __pm_runtime_idle() returns -11! initcall ehci_hcd_init+0x0/0xf0 returned 0 after 197960 usecs calling oxu_module_init+0x0/0x40 @ 1 bus: 'platform': add driver oxu210hp-hcd initcall oxu_module_init+0x0/0x40 returned 0 after 4018 usecs calling isp116x_init+0x0/0x70 @ 1 116x: driver isp116x-hcd, 03 Nov 2005 bus: 'platform': add driver isp116x-hcd initcall isp116x_init+0x0/0x70 returned 0 after 7722 usecs calling ohci_hcd_mod_init+0x0/0x120 @ 1 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver bus: 'pci': add driver ohci_hcd bus: 'ssb': add driver ohci_hcd bus: 'platform': add driver sm501-usb initcall ohci_hcd_mod_init+0x0/0x120 returned 0 after 15429 usecs calling uhci_hcd_init+0x0/0x100 @ 1 uhci_hcd: USB Universal Host Controller Interface driver bus: 'pci': add driver uhci_hcd bus: 'pci': driver_probe_device: matched device 0000:00:10.0 with driver uhci_hcd bus: 'pci': really_probe: probing driver uhci_hcd with device 0000:00:10.0 uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.0: calling quirk_via_vlink+0x0/0x120 uhci_hcd 0000:00:10.0: UHCI Host Controller device: 'usbmon2': device_add PM: Adding info for No Bus:usbmon2 uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b400 device: 'usb2': device_add bus: 'usb': add device usb2 PM: Adding info for usb:usb2 device: 'fw0': device_add bus: 'firewire': add device fw0 PM: Adding info for firewire:fw0 bus: 'usb': driver_probe_device: matched device usb2 with driver usb bus: 'usb': really_probe: probing driver usb with device usb2 usb usb2: configuration #1 chosen from 1 choice device: '2-0:1.0': device_add bus: 'usb': add device 2-0:1.0 PM: Adding info for usb:2-0:1.0 firewire fw0: __pm_runtime_idle()! firewire fw0: __pm_runtime_idle() returns -11! device: 'fw0.0': device_add bus: 'firewire': add device fw0.0 PM: Adding info for firewire:fw0.0 bus: 'firewire': driver_probe_device: matched device fw0.0 with driver net bus: 'firewire': really_probe: probing driver net with device fw0.0 device: 'firewire0': device_add PM: Adding info for No Bus:firewire0 bus: 'usb': driver_probe_device: matched device 2-0:1.0 with driver hub bus: 'usb': really_probe: probing driver hub with device 2-0:1.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected driver: '2-0:1.0': driver_bound: bound to device 'hub' bus: 'usb': really_probe: bound device 2-0:1.0 to driver hub hub 2-0:1.0: __pm_runtime_idle()! hub 2-0:1.0: __pm_runtime_idle() returns -11! device: 'ep_81': device_add PM: Adding info for No Bus:ep_81 device: 'usbdev2.1': device_add PM: Adding info for No Bus:usbdev2.1 firewire_net: firewire0: IPv4 over FireWire on device 00e0180000330efd driver: 'fw0.0': driver_bound: bound to device 'net' bus: 'firewire': really_probe: bound device fw0.0 to driver net net fw0.0: __pm_runtime_idle()! net fw0.0: __pm_runtime_idle() returns -11! firewire_core: created device fw0: GUID 00e0180000330efd, S400 driver: 'usb2': driver_bound: bound to device 'usb' bus: 'usb': really_probe: bound device usb2 to driver usb usb usb2: __pm_runtime_idle()! usb usb2: __pm_runtime_idle() returns -11! device: 'ep_00': device_add PM: Adding info for No Bus:ep_00 driver: '0000:00:10.0': driver_bound: bound to device 'uhci_hcd' bus: 'pci': really_probe: bound device 0000:00:10.0 to driver uhci_hcd uhci_hcd 0000:00:10.0: __pm_runtime_idle()! uhci_hcd 0000:00:10.0: __pm_runtime_idle() returns -11! bus: 'pci': driver_probe_device: matched device 0000:00:10.1 with driver uhci_hcd bus: 'pci': really_probe: probing driver uhci_hcd with device 0000:00:10.1 uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.1: calling quirk_via_vlink+0x0/0x120 uhci_hcd 0000:00:10.1: UHCI Host Controller device: 'usbmon3': device_add PM: Adding info for No Bus:usbmon3 uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b800 device: 'usb3': device_add bus: 'usb': add device usb3 PM: Adding info for usb:usb3 bus: 'usb': driver_probe_device: matched device usb3 with driver usb bus: 'usb': really_probe: probing driver usb with device usb3 usb usb3: configuration #1 chosen from 1 choice device: '3-0:1.0': device_add bus: 'usb': add device 3-0:1.0 PM: Adding info for usb:3-0:1.0 bus: 'usb': driver_probe_device: matched device 3-0:1.0 with driver hub bus: 'usb': really_probe: probing driver hub with device 3-0:1.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected driver: '3-0:1.0': driver_bound: bound to device 'hub' bus: 'usb': really_probe: bound device 3-0:1.0 to driver hub hub 3-0:1.0: __pm_runtime_idle()! hub 3-0:1.0: __pm_runtime_idle() returns -11! device: 'ep_81': device_add PM: Adding info for No Bus:ep_81 device: 'usbdev3.1': device_add PM: Adding info for No Bus:usbdev3.1 driver: 'usb3': driver_bound: bound to device 'usb' bus: 'usb': really_probe: bound device usb3 to driver usb usb usb3: __pm_runtime_idle()! usb usb3: __pm_runtime_idle() returns -11! device: 'ep_00': device_add PM: Adding info for No Bus:ep_00 driver: '0000:00:10.1': driver_bound: bound to device 'uhci_hcd' bus: 'pci': really_probe: bound device 0000:00:10.1 to driver uhci_hcd uhci_hcd 0000:00:10.1: __pm_runtime_idle()! uhci_hcd 0000:00:10.1: __pm_runtime_idle() returns -11! bus: 'pci': driver_probe_device: matched device 0000:00:10.2 with driver uhci_hcd bus: 'pci': really_probe: probing driver uhci_hcd with device 0000:00:10.2 uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.2: calling quirk_via_vlink+0x0/0x120 uhci_hcd 0000:00:10.2: UHCI Host Controller device: 'usbmon4': device_add PM: Adding info for No Bus:usbmon4 uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c000 device: 'usb4': device_add bus: 'usb': add device usb4 PM: Adding info for usb:usb4 bus: 'usb': driver_probe_device: matched device usb4 with driver usb bus: 'usb': really_probe: probing driver usb with device usb4 usb usb4: configuration #1 chosen from 1 choice device: '4-0:1.0': device_add bus: 'usb': add device 4-0:1.0 PM: Adding info for usb:4-0:1.0 bus: 'usb': driver_probe_device: matched device 4-0:1.0 with driver hub bus: 'usb': really_probe: probing driver hub with device 4-0:1.0 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected driver: '4-0:1.0': driver_bound: bound to device 'hub' bus: 'usb': really_probe: bound device 4-0:1.0 to driver hub hub 4-0:1.0: __pm_runtime_idle()! hub 4-0:1.0: __pm_runtime_idle() returns -11! device: 'ep_81': device_add PM: Adding info for No Bus:ep_81 device: 'usbdev4.1': device_add PM: Adding info for No Bus:usbdev4.1 driver: 'usb4': driver_bound: bound to device 'usb' bus: 'usb': really_probe: bound device usb4 to driver usb usb usb4: __pm_runtime_idle()! usb usb4: __pm_runtime_idle() returns -11! device: 'ep_00': device_add PM: Adding info for No Bus:ep_00 driver: '0000:00:10.2': driver_bound: bound to device 'uhci_hcd' bus: 'pci': really_probe: bound device 0000:00:10.2 to driver uhci_hcd uhci_hcd 0000:00:10.2: __pm_runtime_idle()! uhci_hcd 0000:00:10.2: __pm_runtime_idle() returns -11! bus: 'pci': driver_probe_device: matched device 0000:00:10.3 with driver uhci_hcd bus: 'pci': really_probe: probing driver uhci_hcd with device 0000:00:10.3 uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.3: calling quirk_via_vlink+0x0/0x120 uhci_hcd 0000:00:10.3: UHCI Host Controller device: 'usbmon5': device_add PM: Adding info for No Bus:usbmon5 uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c400 device: 'usb5': device_add bus: 'usb': add device usb5 PM: Adding info for usb:usb5 bus: 'usb': driver_probe_device: matched device usb5 with driver usb bus: 'usb': really_probe: probing driver usb with device usb5 usb usb5: configuration #1 chosen from 1 choice device: '5-0:1.0': device_add bus: 'usb': add device 5-0:1.0 PM: Adding info for usb:5-0:1.0 bus: 'usb': driver_probe_device: matched device 5-0:1.0 with driver hub bus: 'usb': really_probe: probing driver hub with device 5-0:1.0 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected driver: '5-0:1.0': driver_bound: bound to device 'hub' bus: 'usb': really_probe: bound device 5-0:1.0 to driver hub hub 5-0:1.0: __pm_runtime_idle()! hub 5-0:1.0: __pm_runtime_idle() returns -11! device: 'ep_81': device_add PM: Adding info for No Bus:ep_81 device: 'usbdev5.1': device_add PM: Adding info for No Bus:usbdev5.1 driver: 'usb5': driver_bound: bound to device 'usb' bus: 'usb': really_probe: bound device usb5 to driver usb usb usb5: __pm_runtime_idle()! usb usb5: __pm_runtime_idle() returns -11! device: 'ep_00': device_add PM: Adding info for No Bus:ep_00 driver: '0000:00:10.3': driver_bound: bound to device 'uhci_hcd' bus: 'pci': really_probe: bound device 0000:00:10.3 to driver uhci_hcd uhci_hcd 0000:00:10.3: __pm_runtime_idle()! uhci_hcd 0000:00:10.3: __pm_runtime_idle() returns -11! initcall uhci_hcd_init+0x0/0x100 returned 0 after 763391 usecs calling sl811h_init+0x0/0x70 @ 1 sl811: driver sl811-hcd, 19 May 2005 bus: 'platform': add driver sl811-hcd initcall sl811h_init+0x0/0x70 returned 0 after 7037 usecs calling r8a66597_init+0x0/0x6a @ 1 r8a66597_hcd: driver r8a66597_hcd, 2009-05-26 bus: 'platform': add driver r8a66597_hcd initcall r8a66597_init+0x0/0x6a returned 0 after 8274 usecs calling isp1760_init+0x0/0x90 @ 1 bus: 'platform': add driver isp1760 bus: 'pci': add driver isp1760 initcall isp1760_init+0x0/0x90 returned 0 after 8722 usecs calling hwahc_driver_init+0x0/0x50 @ 1 bus: 'usb': add driver hwa-hc usbcore: registered new interface driver hwa-hc initcall hwahc_driver_init+0x0/0x50 returned 0 after 7450 usecs calling c67x00_init+0x0/0x40 @ 1 bus: 'platform': add driver c67x00 initcall c67x00_init+0x0/0x40 returned 0 after 3501 usecs calling wusbcore_init+0x0/0xa0 @ 1 initcall wusbcore_init+0x0/0xa0 returned 0 after 110 usecs calling acm_init+0x0/0x170 @ 1 bus: 'usb': add driver cdc_acm usbcore: registered new interface driver cdc_acm cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters initcall acm_init+0x0/0x170 returned 0 after 14697 usecs calling usblp_init+0x0/0x50 @ 1 bus: 'usb': add driver usblp usbcore: registered new interface driver usblp initcall usblp_init+0x0/0x50 returned 0 after 7266 usecs calling wdm_init+0x0/0x45 @ 1 bus: 'usb': add driver cdc_wdm usbcore: registered new interface driver cdc_wdm initcall wdm_init+0x0/0x45 returned 0 after 7598 usecs calling usbtmc_init+0x0/0x6b @ 1 bus: 'usb': add driver usbtmc usbcore: registered new interface driver usbtmc initcall usbtmc_init+0x0/0x6b returned 0 after 7432 usecs calling usb_stor_init+0x0/0x7d @ 1 Initializing USB Mass Storage driver... bus: 'usb': add driver usb-storage usbcore: registered new interface driver usb-storage USB Mass Storage support registered. initcall usb_stor_init+0x0/0x7d returned 0 after 15125 usecs calling usb_usual_init+0x0/0x73 @ 1 bus: 'usb': add driver libusual usbcore: registered new interface driver libusual initcall usb_usual_init+0x0/0x73 returned 0 after 8007 usecs calling cypress_init+0x0/0x50 @ 1 bus: 'usb': add driver ums-cypress usbcore: registered new interface driver ums-cypress initcall cypress_init+0x0/0x50 returned 0 after 8276 usecs calling isd200_init+0x0/0x50 @ 1 bus: 'usb': add driver ums-isd200 usbcore: registered new interface driver ums-isd200 initcall isd200_init+0x0/0x50 returned 0 after 8101 usecs calling onetouch_init+0x0/0x50 @ 1 bus: 'usb': add driver ums-onetouch usbcore: registered new interface driver ums-onetouch initcall onetouch_init+0x0/0x50 returned 0 after 8436 usecs calling sddr55_init+0x0/0x50 @ 1 bus: 'usb': add driver ums-sddr55 usbcore: registered new interface driver ums-sddr55 initcall sddr55_init+0x0/0x50 returned 0 after 8102 usecs calling usbat_init+0x0/0x45 @ 1 bus: 'usb': add driver ums-usbat usbcore: registered new interface driver ums-usbat initcall usbat_init+0x0/0x45 returned 0 after 7931 usecs calling usb_mdc800_init+0x0/0x2db @ 1 bus: 'usb': add driver mdc800 usbcore: registered new interface driver mdc800 mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera initcall usb_mdc800_init+0x0/0x2db returned 0 after 13727 usecs calling adu_init+0x0/0xbe @ 1 bus: 'usb': add driver adutux usbcore: registered new interface driver adutux adutux adutux (see www.ontrak.net) v0.0.13 adutux is an experimental driver. Use at your own risk initcall adu_init+0x0/0xbe returned 0 after 16027 usecs calling appledisplay_init+0x0/0x82 @ 1 bus: 'usb': add driver appledisplay usbcore: registered new interface driver appledisplay initcall appledisplay_init+0x0/0x82 returned 0 after 8591 usecs calling berry_init+0x0/0x45 @ 1 bus: 'usb': add driver berry_charge usbcore: registered new interface driver berry_charge initcall berry_init+0x0/0x45 returned 0 after 8450 usecs calling usb_cytherm_init+0x0/0x7b @ 1 bus: 'usb': add driver cytherm usbcore: registered new interface driver cytherm cytherm: v1.0:Cypress USB Thermometer driver initcall usb_cytherm_init+0x0/0x7b returned 0 after 11534 usecs calling emi26_init+0x0/0x45 @ 1 bus: 'usb': add driver emi26 - firmware loader usbcore: registered new interface driver emi26 - firmware loader initcall emi26_init+0x0/0x45 returned 0 after 10319 usecs calling emi62_init+0x0/0x60 @ 1 bus: 'usb': add driver emi62 - firmware loader usbcore: registered new interface driver emi62 - firmware loader initcall emi62_init+0x0/0x60 returned 0 after 10326 usecs calling ftdi_elan_init+0x0/0x193 @ 1 driver ftdi-elan built at 11:54:45 on Sep 30 2009 bus: 'usb': add driver ftdi-elan usbcore: registered new interface driver ftdi-elan initcall ftdi_elan_init+0x0/0x193 returned 0 after 12713 usecs calling usb_idmouse_init+0x0/0x78 @ 1 idmouse: 0.6:Siemens ID Mouse FingerTIP Sensor Driver bus: 'usb': add driver idmouse usbcore: registered new interface driver idmouse initcall usb_idmouse_init+0x0/0x78 returned 0 after 12326 usecs calling iowarrior_init+0x0/0x50 @ 1 bus: 'usb': add driver iowarrior usbcore: registered new interface driver iowarrior initcall iowarrior_init+0x0/0x50 returned 0 after 7897 usecs calling isight_firmware_init+0x0/0x45 @ 1 bus: 'usb': add driver isight_firmware usbcore: registered new interface driver isight_firmware initcall isight_firmware_init+0x0/0x45 returned 0 after 8958 usecs calling usb_lcd_init+0x0/0x62 @ 1 bus: 'usb': add driver usblcd usbcore: registered new interface driver usblcd initcall usb_lcd_init+0x0/0x62 returned 0 after 7412 usecs calling ld_usb_init+0x0/0x62 @ 1 bus: 'usb': add driver ldusb usbcore: registered new interface driver ldusb initcall ld_usb_init+0x0/0x62 returned 0 after 7257 usecs calling usb_led_init+0x0/0x62 @ 1 bus: 'usb': add driver usbled usbcore: registered new interface driver usbled initcall usb_led_init+0x0/0x62 returned 0 after 7432 usecs calling usb_rio_init+0x0/0x65 @ 1 bus: 'usb': add driver rio500 usbcore: registered new interface driver rio500 rio500: v1.1:USB Rio 500 driver initcall usb_rio_init+0x0/0x65 returned 0 after 10284 usecs calling usbtest_init+0x0/0x83 @ 1 bus: 'usb': add driver usbtest usbcore: registered new interface driver usbtest initcall usbtest_init+0x0/0x83 returned 0 after 7611 usecs calling tv_init+0x0/0x70 @ 1 bus: 'usb': add driver trancevibrator usbcore: registered new interface driver trancevibrator trancevibrator: v1.1:PlayStation 2 Trance Vibrator driver initcall tv_init+0x0/0x70 returned 0 after 13845 usecs calling uss720_init+0x0/0x8a @ 1 bus: 'usb': add driver uss720 usbcore: registered new interface driver uss720 uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip uss720: NOTE: this is a special purpose driver to allow nonstandard uss720: protocols (eg. bitbang) over USS720 usb to parallel cables uss720: If you just want to connect to a printer, use usblp instead initcall uss720_init+0x0/0x8a returned 0 after 33008 usecs calling vstusb_init+0x0/0x73 @ 1 bus: 'usb': add driver vstusb usbcore: registered new interface driver vstusb initcall vstusb_init+0x0/0x73 returned 0 after 7453 usecs calling usb_sisusb_init+0x0/0x50 @ 1 bus: 'usb': add driver sisusb usbcore: registered new interface driver sisusb initcall usb_sisusb_init+0x0/0x50 returned 0 after 7397 usecs calling cxacru_init+0x0/0x50 @ 1 bus: 'usb': add driver cxacru usbcore: registered new interface driver cxacru initcall cxacru_init+0x0/0x50 returned 0 after 7432 usecs calling speedtch_usb_init+0x0/0x50 @ 1 bus: 'usb': add driver speedtch usbcore: registered new interface driver speedtch initcall speedtch_usb_init+0x0/0x50 returned 0 after 7754 usecs calling usbatm_usb_init+0x0/0x80 @ 1 initcall usbatm_usb_init+0x0/0x80 returned 0 after 0 usecs calling i8042_init+0x0/0x49b @ 1 bus: 'pnp': add driver i8042 kbd bus: 'pnp': add driver i8042 aux bus: 'pnp': remove driver i8042 kbd driver: 'i8042 kbd': driver_release bus: 'pnp': remove driver i8042 aux driver: 'i8042 aux': driver_release PNP: No PS/2 controller found. Probing ports directly. Registering platform device 'i8042'. Parent at platform device: 'i8042': device_add bus: 'platform': add device i8042 PM: Adding info for platform:i8042 platform i8042: __pm_runtime_idle()! platform i8042: __pm_runtime_idle() returns -11! bus: 'platform': add driver i8042 bus: 'platform': driver_probe_device: matched device i8042 with driver i8042 bus: 'platform': really_probe: probing driver i8042 with device i8042 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 driver: 'i8042': driver_bound: bound to device 'i8042' bus: 'platform': really_probe: bound device i8042 to driver i8042 i8042 i8042: __pm_runtime_idle()! i8042 i8042: __pm_runtime_idle() returns -11! device: 'serio0': device_add bus: 'serio': add device serio0 PM: Adding info for serio:serio0 serio serio0: __pm_runtime_idle()! serio serio0: __pm_runtime_idle() returns -11! device: 'serio1': device_add bus: 'serio': add device serio1 PM: Adding info for serio:serio1 initcall i8042_init+0x0/0x49b returned 0 after 114468 usecs calling serport_init+0x0/0x5c @ 1 initcall serport_init+0x0/0x5c returned 0 after 1 usecs calling ct82c710_init+0x0/0x1ec @ 1 initcall ct82c710_init+0x0/0x1ec returned -19 after 8 usecs calling pcips2_init+0x0/0x50 @ 1 bus: 'pci': add driver pcips2 serio serio1: __pm_runtime_idle()! serio serio1: __pm_runtime_idle() returns -11! initcall pcips2_init+0x0/0x50 returned 0 after 10621 usecs calling emu_init+0x0/0x50 @ 1 bus: 'pci': add driver Emu10k1_gameport initcall emu_init+0x0/0x50 returned 0 after 3961 usecs calling mousedev_init+0x0/0xbd @ 1 device: 'mice': device_add PM: Adding info for No Bus:mice device: 'psaux': device_add PM: Adding info for No Bus:psaux mice: PS/2 mouse device common for all mice initcall mousedev_init+0x0/0xbd returned 0 after 16143 usecs calling joydev_init+0x0/0x40 @ 1 initcall joydev_init+0x0/0x40 returned 0 after 3 usecs calling evdev_init+0x0/0x40 @ 1 device: 'event0': device_add PM: Adding info for No Bus:event0 device: 'event1': device_add PM: Adding info for No Bus:event1 device: 'event2': device_add PM: Adding info for No Bus:event2 initcall evdev_init+0x0/0x40 returned 0 after 19358 usecs calling adp5588_init+0x0/0x40 @ 1 bus: 'i2c': add driver adp5588_keys i2c-core: driver [adp5588_keys] registered initcall adp5588_init+0x0/0x40 returned 0 after 7489 usecs calling atkbd_init+0x0/0x58 @ 1 bus: 'serio': add driver atkbd initcall atkbd_init+0x0/0x58 returned 0 after 3197 usecs calling lkkbd_init+0x0/0x50 @ 1 bus: 'serio': add driver lkkbd bus: 'serio': driver_probe_device: matched device serio0 with driver atkbd bus: 'serio': really_probe: probing driver atkbd with device serio0 initcall lkkbd_init+0x0/0x50 returned 0 after 16090 usecs calling lm8323_init+0x0/0x40 @ 1 bus: 'i2c': add driver lm8323 i2c-core: driver [lm8323] registered initcall lm8323_init+0x0/0x40 returned 0 after 6538 usecs calling max7359_init+0x0/0x40 @ 1 bus: 'i2c': add driver max7359 i2c-core: driver [max7359] registered initcall max7359_init+0x0/0x40 returned 0 after 6643 usecs calling nkbd_init+0x0/0x50 @ 1 bus: 'serio': add driver newtonkbd serio serio0: __pm_runtime_idle()! serio serio0: __pm_runtime_idle() returns -11! bus: 'serio': driver_probe_device: matched device serio1 with driver atkbd bus: 'serio': really_probe: probing driver atkbd with device serio1 initcall nkbd_init+0x0/0x50 returned 0 after 23556 usecs calling skbd_init+0x0/0x50 @ 1 bus: 'serio': add driver stowaway initcall skbd_init+0x0/0x50 returned 0 after 3441 usecs calling sunkbd_init+0x0/0x50 @ 1 bus: 'serio': add driver sunkbd initcall sunkbd_init+0x0/0x50 returned 0 after 3297 usecs calling xtkbd_init+0x0/0x50 @ 1 bus: 'serio': add driver xtkbd initcall xtkbd_init+0x0/0x50 returned 0 after 3195 usecs calling ad7877_init+0x0/0x40 @ 1 bus: 'spi': add driver ad7877 serio serio1: __pm_runtime_idle()! serio serio1: __pm_runtime_idle() returns -11! initcall ad7877_init+0x0/0x40 returned 0 after 10646 usecs calling ad7879_init+0x0/0x40 @ 1 bus: 'i2c': add driver ad7879 i2c-core: driver [ad7879] registered initcall ad7879_init+0x0/0x40 returned 0 after 6430 usecs calling gunze_init+0x0/0x50 @ 1 bus: 'serio': add driver gunze initcall gunze_init+0x0/0x50 returned 0 after 3180 usecs calling fujitsu_init+0x0/0x50 @ 1 bus: 'serio': add driver fujitsu_ts initcall fujitsu_init+0x0/0x50 returned 0 after 3647 usecs calling inexio_init+0x0/0x50 @ 1 bus: 'serio': add driver inexio initcall inexio_init+0x0/0x50 returned 0 after 3286 usecs calling mtouch_init+0x0/0x45 @ 1 bus: 'serio': add driver mtouch initcall mtouch_init+0x0/0x45 returned 0 after 3295 usecs calling mk712_init+0x0/0x21b @ 1 mk712: device not present initcall mk712_init+0x0/0x21b returned -19 after 2357 usecs calling usbtouch_init+0x0/0x50 @ 1 bus: 'usb': add driver usbtouchscreen usbcore: registered new interface driver usbtouchscreen initcall usbtouch_init+0x0/0x50 returned 0 after 8808 usecs calling pm_init+0x0/0x50 @ 1 bus: 'serio': add driver penmountlpc initcall pm_init+0x0/0x50 returned 0 after 3698 usecs calling touchit213_init+0x0/0x50 @ 1 bus: 'serio': add driver touchit213 initcall touchit213_init+0x0/0x50 returned 0 after 3633 usecs calling tw_init+0x0/0x50 @ 1 bus: 'serio': add driver touchwin initcall tw_init+0x0/0x50 returned 0 after 3583 usecs calling tsc2007_init+0x0/0x40 @ 1 bus: 'i2c': add driver tsc2007 i2c-core: driver [tsc2007] registered initcall tsc2007_init+0x0/0x40 returned 0 after 6645 usecs calling w8001_init+0x0/0x50 @ 1 bus: 'serio': add driver w8001 initcall w8001_init+0x0/0x50 returned 0 after 3298 usecs calling pcap_ts_init+0x0/0x40 @ 1 bus: 'platform': add driver pcap-ts initcall pcap_ts_init+0x0/0x40 returned 0 after 3600 usecs calling cmos_init+0x0/0x93 @ 1 Driver 'rtc_cmos' needs updating - please use bus_type methods bus: 'pnp': add driver rtc_cmos bus: 'pnp': driver_probe_device: matched device 00:02 with driver rtc_cmos bus: 'pnp': really_probe: probing driver rtc_cmos with device 00:02 rtc_cmos 00:02: RTC can wake from S4 device: 'rtc0': device_add PM: Adding info for No Bus:rtc0 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 114 bytes nvram driver: '00:02': driver_bound: bound to device 'rtc_cmos' bus: 'pnp': really_probe: bound device 00:02 to driver rtc_cmos rtc_cmos 00:02: __pm_runtime_idle()! rtc_cmos 00:02: __pm_runtime_idle() returns -11! initcall cmos_init+0x0/0x93 returned 0 after 58099 usecs calling ds1307_init+0x0/0x40 @ 1 bus: 'i2c': add driver rtc-ds1307 i2c-core: driver [rtc-ds1307] registered initcall ds1307_init+0x0/0x40 returned 0 after 7151 usecs calling ds1374_init+0x0/0x40 @ 1 bus: 'i2c': add driver rtc-ds1374 i2c-core: driver [rtc-ds1374] registered initcall ds1374_init+0x0/0x40 returned 0 after 7141 usecs calling ds1511_rtc_init+0x0/0x40 @ 1 bus: 'platform': add driver ds1511 initcall ds1511_rtc_init+0x0/0x40 returned 0 after 3621 usecs calling ds1553_init+0x0/0x40 @ 1 bus: 'platform': add driver rtc-ds1553 initcall ds1553_init+0x0/0x40 returned 0 after 3842 usecs calling ds1672_init+0x0/0x40 @ 1 bus: 'i2c': add driver rtc-ds1672 i2c-core: driver [rtc-ds1672] registered initcall ds1672_init+0x0/0x40 returned 0 after 7142 usecs calling ds1742_init+0x0/0x40 @ 1 bus: 'platform': add driver rtc-ds1742 initcall ds1742_init+0x0/0x40 returned 0 after 3851 usecs calling ds3234_init+0x0/0x40 @ 1 bus: 'spi': add driver ds3234 initcall ds3234_init+0x0/0x40 returned 0 after 3080 usecs calling m41t80_rtc_init+0x0/0x40 @ 1 bus: 'i2c': add driver rtc-m41t80 i2c-core: driver [rtc-m41t80] registered initcall m41t80_rtc_init+0x0/0x40 returned 0 after 7151 usecs calling m41t94_init+0x0/0x40 @ 1 bus: 'spi': add driver rtc-m41t94 initcall m41t94_init+0x0/0x40 returned 0 after 3414 usecs calling m48t59_rtc_init+0x0/0x40 @ 1 bus: 'platform': add driver rtc-m48t59 initcall m48t59_rtc_init+0x0/0x40 returned 0 after 3840 usecs calling max6900_init+0x0/0x40 @ 1 bus: 'i2c': add driver rtc-max6900 i2c-core: driver [rtc-max6900] registered initcall max6900_init+0x0/0x40 returned 0 after 7324 usecs calling max6902_init+0x0/0x40 @ 1 bus: 'spi': add driver rtc-max6902 initcall max6902_init+0x0/0x40 returned 0 after 3508 usecs calling rtc_pcap_init+0x0/0x50 @ 1 bus: 'platform': add driver pcap-rtc bus: 'platform': remove driver pcap-rtc driver: 'pcap-rtc': driver_release initcall rtc_pcap_init+0x0/0x50 returned -19 after 10942 usecs calling r9701_init+0x0/0x40 @ 1 bus: 'spi': add driver rtc-r9701 initcall r9701_init+0x0/0x40 returned 0 after 3456 usecs calling rs5c348_init+0x0/0x40 @ 1 bus: 'spi': add driver rtc-rs5c348 initcall rs5c348_init+0x0/0x40 returned 0 after 3495 usecs calling rs5c372_init+0x0/0x40 @ 1 bus: 'i2c': add driver rtc-rs5c372 i2c-core: driver [rtc-rs5c372] registered initcall rs5c372_init+0x0/0x40 returned 0 after 7296 usecs calling rx8025_init+0x0/0x40 @ 1 bus: 'i2c': add driver rtc-rx8025 i2c-core: driver [rtc-rx8025] registered initcall rx8025_init+0x0/0x40 returned 0 after 7214 usecs calling s35390a_rtc_init+0x0/0x3d @ 1 bus: 'i2c': add driver rtc-s35390a i2c-core: driver [rtc-s35390a] registered initcall s35390a_rtc_init+0x0/0x3d returned 0 after 7322 usecs calling test_init+0x0/0xf3 @ 1 bus: 'platform': add driver rtc-test Registering platform device 'rtc-test.0'. Parent at platform device: 'rtc-test.0': device_add bus: 'platform': add device rtc-test.0 PM: Adding info for platform:rtc-test.0 bus: 'platform': driver_probe_device: matched device rtc-test.0 with driver rtc-test bus: 'platform': really_probe: probing driver rtc-test with device rtc-test.0 device: 'rtc1': device_add PM: Adding info for No Bus:rtc1 rtc-test rtc-test.0: rtc core: registered test as rtc1 driver: 'rtc-test.0': driver_bound: bound to device 'rtc-test' bus: 'platform': really_probe: bound device rtc-test.0 to driver rtc-test rtc-test rtc-test.0: __pm_runtime_idle()! rtc-test rtc-test.0: __pm_runtime_idle() returns -11! Registering platform device 'rtc-test.1'. Parent at platform device: 'rtc-test.1': device_add bus: 'platform': add device rtc-test.1 PM: Adding info for platform:rtc-test.1 bus: 'platform': driver_probe_device: matched device rtc-test.1 with driver rtc-test bus: 'platform': really_probe: probing driver rtc-test with device rtc-test.1 device: 'rtc2': device_add PM: Adding info for No Bus:rtc2 rtc-test rtc-test.1: rtc core: registered test as rtc2 driver: 'rtc-test.1': driver_bound: bound to device 'rtc-test' bus: 'platform': really_probe: bound device rtc-test.1 to driver rtc-test rtc-test rtc-test.1: __pm_runtime_idle()! rtc-test rtc-test.1: __pm_runtime_idle() returns -11! initcall test_init+0x0/0xf3 returned 0 after 125909 usecs calling v3020_init+0x0/0x40 @ 1 bus: 'platform': add driver v3020 initcall v3020_init+0x0/0x40 returned 0 after 3416 usecs calling wm831x_rtc_init+0x0/0x40 @ 1 bus: 'platform': add driver wm831x-rtc initcall wm831x_rtc_init+0x0/0x40 returned 0 after 3838 usecs calling i2c_dev_init+0x0/0xe3 @ 1 i2c /dev entries driver device class 'i2c-dev': registering bus: 'i2c': add driver dev_driver i2c-core: driver [dev_driver] registered initcall i2c_dev_init+0x0/0xe3 returned 0 after 13042 usecs calling acpi_smbus_cmi_init+0x0/0x40 @ 1 bus: 'acpi': add driver cmi initcall acpi_smbus_cmi_init+0x0/0x40 returned 0 after 3060 usecs calling i2c_ali15x3_init+0x0/0x50 @ 1 bus: 'pci': add driver ali15x3_smbus initcall i2c_ali15x3_init+0x0/0x50 returned 0 after 3750 usecs calling amd756_init+0x0/0x50 @ 1 bus: 'pci': add driver amd756_smbus initcall amd756_init+0x0/0x50 returned 0 after 3629 usecs calling i2c_i801_init+0x0/0x50 @ 1 bus: 'pci': add driver i801_smbus initcall i2c_i801_init+0x0/0x50 returned 0 after 3458 usecs calling nforce2_init+0x0/0x50 @ 1 bus: 'pci': add driver nForce2_smbus initcall nforce2_init+0x0/0x50 returned 0 after 3710 usecs calling i2c_piix4_init+0x0/0x50 @ 1 bus: 'pci': add driver piix4_smbus initcall i2c_piix4_init+0x0/0x50 returned 0 after 3544 usecs calling i2c_sis5595_init+0x0/0x50 @ 1 bus: 'pci': add driver sis5595_smbus initcall i2c_sis5595_init+0x0/0x50 returned 0 after 3705 usecs calling i2c_sis630_init+0x0/0x50 @ 1 bus: 'pci': add driver sis630_smbus initcall i2c_sis630_init+0x0/0x50 returned 0 after 3621 usecs calling i2c_sis96x_init+0x0/0x50 @ 1 bus: 'pci': add driver sis96x_smbus initcall i2c_sis96x_init+0x0/0x50 returned 0 after 3980 usecs calling i2c_vt586b_init+0x0/0x50 @ 1 bus: 'pci': add driver vt586b_smbus initcall i2c_vt586b_init+0x0/0x50 returned 0 after 3636 usecs calling i2c_adap_simtec_init+0x0/0x3d @ 1 bus: 'platform': add driver simtec-i2c initcall i2c_adap_simtec_init+0x0/0x3d returned 0 after 3844 usecs calling i2c_parport_init+0x0/0x70 @ 1 i2c-parport: adapter type unspecified initcall i2c_parport_init+0x0/0x70 returned -19 after 3367 usecs calling i2c_parport_init+0x0/0x193 @ 1 i2c-parport-light: adapter type unspecified initcall i2c_parport_init+0x0/0x193 returned -19 after 3874 usecs calling taos_init+0x0/0x50 @ 1 bus: 'serio': add driver taos-evm initcall taos_init+0x0/0x50 returned 0 after 3447 usecs calling usb_i2c_tiny_usb_init+0x0/0x50 @ 1 bus: 'usb': add driver i2c-tiny-usb usbcore: registered new interface driver i2c-tiny-usb initcall usb_i2c_tiny_usb_init+0x0/0x50 returned 0 after 8473 usecs calling i2c_voodoo3_init+0x0/0x50 @ 1 bus: 'pci': add driver voodoo3_smbus initcall i2c_voodoo3_init+0x0/0x50 returned 0 after 3718 usecs calling i2c_pca_pf_init+0x0/0x40 @ 1 bus: 'platform': add driver i2c-pca-platform initcall i2c_pca_pf_init+0x0/0x40 returned 0 after 4362 usecs calling ds1682_init+0x0/0x40 @ 1 bus: 'i2c': add driver ds1682 i2c-core: driver [ds1682] registered initcall ds1682_init+0x0/0x40 returned 0 after 6469 usecs calling tsl2550_init+0x0/0x40 @ 1 bus: 'i2c': add driver tsl2550 i2c-core: driver [tsl2550] registered initcall tsl2550_init+0x0/0x40 returned 0 after 6648 usecs calling ttusb_dec_init+0x0/0x6b @ 1 bus: 'usb': add driver ttusb-dec usbcore: registered new interface driver ttusb-dec initcall ttusb_dec_init+0x0/0x6b returned 0 after 7935 usecs calling ttusb_init+0x0/0x6b @ 1 bus: 'usb': add driver ttusb usbcore: registered new interface driver ttusb initcall ttusb_init+0x0/0x6b returned 0 after 7258 usecs calling flexcop_module_init+0x0/0x40 @ 1 b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully initcall flexcop_module_init+0x0/0x40 returned 0 after 7285 usecs calling vp7045_usb_module_init+0x0/0x62 @ 1 bus: 'usb': add driver dvb_usb_vp7045 usbcore: registered new interface driver dvb_usb_vp7045 initcall vp7045_usb_module_init+0x0/0x62 returned 0 after 8778 usecs calling gp8psk_usb_module_init+0x0/0x62 @ 1 bus: 'usb': add driver dvb_usb_gp8psk usbcore: registered new interface driver dvb_usb_gp8psk initcall gp8psk_usb_module_init+0x0/0x62 returned 0 after 8791 usecs calling dtt200u_usb_module_init+0x0/0x62 @ 1 bus: 'usb': add driver dvb_usb_dtt200u usbcore: registered new interface driver dvb_usb_dtt200u initcall dtt200u_usb_module_init+0x0/0x62 returned 0 after 8942 usecs calling a800_module_init+0x0/0x62 @ 1 bus: 'usb': add driver dvb_usb_a800 usbcore: registered new interface driver dvb_usb_a800 initcall a800_module_init+0x0/0x62 returned 0 after 8445 usecs calling dibusb_module_init+0x0/0x62 @ 1 bus: 'usb': add driver dvb_usb_dibusb_mb usbcore: registered new interface driver dvb_usb_dibusb_mb initcall dibusb_module_init+0x0/0x62 returned 0 after 9297 usecs calling dibusb_mc_module_init+0x0/0x62 @ 1 bus: 'usb': add driver dvb_usb_dibusb_mc usbcore: registered new interface driver dvb_usb_dibusb_mc initcall dibusb_mc_module_init+0x0/0x62 returned 0 after 9303 usecs calling umt_module_init+0x0/0x62 @ 1 bus: 'usb': add driver dvb_usb_umt_010 usbcore: registered new interface driver dvb_usb_umt_010 initcall umt_module_init+0x0/0x62 returned 0 after 8955 usecs calling gl861_module_init+0x0/0x62 @ 1 bus: 'usb': add driver dvb_usb_gl861 usbcore: registered new interface driver dvb_usb_gl861 initcall gl861_module_init+0x0/0x62 returned 0 after 8621 usecs calling digitv_module_init+0x0/0x62 @ 1 bus: 'usb': add driver dvb_usb_digitv usbcore: registered new interface driver dvb_usb_digitv initcall digitv_module_init+0x0/0x62 returned 0 after 8781 usecs calling ttusb2_module_init+0x0/0x62 @ 1 bus: 'usb': add driver dvb_usb_ttusb2 usbcore: registered new interface driver dvb_usb_ttusb2 initcall ttusb2_module_init+0x0/0x62 returned 0 after 8777 usecs calling opera1_module_init+0x0/0x62 @ 1 bus: 'usb': add driver opera1 usbcore: registered new interface driver opera1 initcall opera1_module_init+0x0/0x62 returned 0 after 7427 usecs calling anysee_module_init+0x0/0x69 @ 1 bus: 'usb': add driver dvb_usb_anysee usbcore: registered new interface driver dvb_usb_anysee initcall anysee_module_init+0x0/0x69 returned 0 after 8783 usecs calling cinergyt2_usb_init+0x0/0x62 @ 1 bus: 'usb': add driver cinergyT2 usbcore: registered new interface driver cinergyT2 initcall cinergyt2_usb_init+0x0/0x62 returned 0 after 7931 usecs calling friio_module_init+0x0/0x69 @ 1 bus: 'usb': add driver dvb_usb_friio usbcore: registered new interface driver dvb_usb_friio initcall friio_module_init+0x0/0x69 returned 0 after 8608 usecs calling dm1105_init+0x0/0x50 @ 1 bus: 'pci': add driver dm1105 initcall dm1105_init+0x0/0x50 returned 0 after 3118 usecs calling pt1_init+0x0/0x50 @ 1 bus: 'pci': add driver earth-pt1 initcall pt1_init+0x0/0x50 returned 0 after 3370 usecs calling fdtv_init+0x0/0x3d @ 1 bus: 'ieee1394': add driver firedtv initcall fdtv_init+0x0/0x3d returned 0 after 3620 usecs calling w1_init+0x0/0xd0 @ 1 Driver for 1-wire Dallas network protocol. bus: 'w1': registered bus: 'w1': add driver w1_master_driver bus: 'w1': add driver w1_slave_driver initcall w1_init+0x0/0xd0 returned 0 after 14074 usecs calling matrox_w1_init+0x0/0x50 @ 1 bus: 'pci': add driver matrox_w1 initcall matrox_w1_init+0x0/0x50 returned 0 after 3502 usecs calling ds_init+0x0/0x70 @ 1 bus: 'usb': add driver DS9490R usbcore: registered new interface driver DS9490R initcall ds_init+0x0/0x70 returned 0 after 7587 usecs calling w1_therm_init+0x0/0x80 @ 1 initcall w1_therm_init+0x0/0x80 returned 0 after 53 usecs calling w1_f2d_init+0x0/0x40 @ 1 initcall w1_f2d_init+0x0/0x40 returned 0 after 1 usecs calling w1_ds2760_init+0x0/0x60 @ 1 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko initcall w1_ds2760_init+0x0/0x60 returned 0 after 7380 usecs calling w1_bq27000_init+0x0/0x50 @ 1 initcall w1_bq27000_init+0x0/0x50 returned 0 after 1 usecs calling pda_power_init+0x0/0x40 @ 1 bus: 'platform': add driver pda-power initcall pda_power_init+0x0/0x40 returned 0 after 3765 usecs calling wm831x_power_init+0x0/0x40 @ 1 bus: 'platform': add driver wm831x-power initcall wm831x_power_init+0x0/0x40 returned 0 after 4012 usecs calling ds2760_battery_init+0x0/0x3d @ 1 bus: 'platform': add driver ds2760-battery initcall ds2760_battery_init+0x0/0x3d returned 0 after 4182 usecs calling bq27x00_battery_init+0x0/0x63 @ 1 bus: 'i2c': add driver bq27200-battery i2c-core: driver [bq27200-battery] registered initcall bq27x00_battery_init+0x0/0x63 returned 0 after 8481 usecs calling max17040_init+0x0/0x40 @ 1 bus: 'i2c': add driver max17040 i2c-core: driver [max17040] registered initcall max17040_init+0x0/0x40 returned 0 after 6814 usecs calling atk0110_init+0x0/0x5b @ 1 bus: 'acpi': add driver ATK0110 initcall atk0110_init+0x0/0x5b returned 0 after 3280 usecs calling asb100_init+0x0/0x40 @ 1 bus: 'i2c': add driver asb100 i2c-core: driver [asb100] registered initcall asb100_init+0x0/0x40 returned 0 after 6484 usecs calling sensors_w83627hf_init+0x0/0x1ab @ 1 w83627hf: Found W83697HF chip at 0x290 bus: 'platform': add driver w83627hf Registering platform device 'w83627hf.656'. Parent at platform device: 'w83627hf.656': device_add bus: 'platform': add device w83627hf.656 PM: Adding info for platform:w83627hf.656 bus: 'platform': driver_probe_device: matched device w83627hf.656 with driver w83627hf bus: 'platform': really_probe: probing driver w83627hf with device w83627hf.656 device: 'hwmon0': device_add PM: Adding info for No Bus:hwmon0 driver: 'w83627hf.656': driver_bound: bound to device 'w83627hf' bus: 'platform': really_probe: bound device w83627hf.656 to driver w83627hf w83627hf w83627hf.656: __pm_runtime_idle()! w83627hf w83627hf.656: __pm_runtime_idle() returns -11! initcall sensors_w83627hf_init+0x0/0x1ab returned 0 after 66608 usecs calling sensors_w83793_init+0x0/0x40 @ 1 bus: 'i2c': add driver w83793 i2c-core: driver [w83793] registered initcall sensors_w83793_init+0x0/0x40 returned 0 after 6490 usecs calling sensors_w83781d_init+0x0/0x40 @ 1 bus: 'i2c': add driver w83781d i2c-core: driver [w83781d] registered initcall sensors_w83781d_init+0x0/0x40 returned 0 after 6647 usecs calling abituguru3_init+0x0/0x300 @ 1 initcall abituguru3_init+0x0/0x300 returned -19 after 0 usecs calling ad7414_init+0x0/0x40 @ 1 bus: 'i2c': add driver ad7414 i2c-core: driver [ad7414] registered initcall ad7414_init+0x0/0x40 returned 0 after 6477 usecs calling init_adcxx+0x0/0x40 @ 1 bus: 'spi': add driver adcxx initcall init_adcxx+0x0/0x40 returned 0 after 2993 usecs calling sensors_adm1021_init+0x0/0x40 @ 1 bus: 'i2c': add driver adm1021 i2c-core: driver [adm1021] registered initcall sensors_adm1021_init+0x0/0x40 returned 0 after 6635 usecs calling sensors_adm1025_init+0x0/0x40 @ 1 bus: 'i2c': add driver adm1025 i2c-core: driver [adm1025] registered initcall sensors_adm1025_init+0x0/0x40 returned 0 after 6645 usecs calling sm_adm1026_init+0x0/0x40 @ 1 bus: 'i2c': add driver adm1026 i2c-core: driver [adm1026] registered initcall sm_adm1026_init+0x0/0x40 returned 0 after 6648 usecs calling sensors_adm1029_init+0x0/0x40 @ 1 bus: 'i2c': add driver adm1029 i2c-core: driver [adm1029] registered initcall sensors_adm1029_init+0x0/0x40 returned 0 after 6645 usecs calling sensors_adm1031_init+0x0/0x40 @ 1 bus: 'i2c': add driver adm1031 i2c-core: driver [adm1031] registered initcall sensors_adm1031_init+0x0/0x40 returned 0 after 6647 usecs calling sensors_adm9240_init+0x0/0x40 @ 1 bus: 'i2c': add driver adm9240 i2c-core: driver [adm9240] registered initcall sensors_adm9240_init+0x0/0x40 returned 0 after 6638 usecs calling adt7462_init+0x0/0x40 @ 1 bus: 'i2c': add driver adt7462 i2c-core: driver [adt7462] registered initcall adt7462_init+0x0/0x40 returned 0 after 6646 usecs calling adt7473_init+0x0/0x40 @ 1 bus: 'i2c': add driver adt7473 i2c-core: driver [adt7473] registered initcall adt7473_init+0x0/0x40 returned 0 after 6646 usecs calling coretemp_init+0x0/0x230 @ 1 initcall coretemp_init+0x0/0x230 returned -19 after 0 usecs calling ds1621_init+0x0/0x40 @ 1 bus: 'i2c': add driver ds1621 i2c-core: driver [ds1621] registered initcall ds1621_init+0x0/0x40 returned 0 after 6479 usecs calling sensors_f75375_init+0x0/0x40 @ 1 bus: 'i2c': add driver f75375 i2c-core: driver [f75375] registered initcall sensors_f75375_init+0x0/0x40 returned 0 after 6479 usecs calling fschmd_init+0x0/0x40 @ 1 bus: 'i2c': add driver fschmd i2c-core: driver [fschmd] registered initcall fschmd_init+0x0/0x40 returned 0 after 6641 usecs calling g760a_init+0x0/0x40 @ 1 bus: 'i2c': add driver g760a i2c-core: driver [g760a] registered initcall g760a_init+0x0/0x40 returned 0 after 6299 usecs calling sensors_gl518sm_init+0x0/0x40 @ 1 bus: 'i2c': add driver gl518sm i2c-core: driver [gl518sm] registered initcall sensors_gl518sm_init+0x0/0x40 returned 0 after 6626 usecs calling sensors_gl520sm_init+0x0/0x3d @ 1 bus: 'i2c': add driver gl520sm i2c-core: driver [gl520sm] registered initcall sensors_gl520sm_init+0x0/0x3d returned 0 after 6639 usecs calling hdaps_init+0x0/0x25d @ 1 hdaps: supported laptop not found! hdaps: driver init failed (ret=-19)! initcall hdaps_init+0x0/0x25d returned -19 after 6397 usecs calling k8temp_init+0x0/0x45 @ 1 bus: 'pci': add driver k8temp bus: 'pci': driver_probe_device: matched device 0000:00:18.3 with driver k8temp bus: 'pci': really_probe: probing driver k8temp with device 0000:00:18.3 device: 'hwmon1': device_add PM: Adding info for No Bus:hwmon1 driver: '0000:00:18.3': driver_bound: bound to device 'k8temp' bus: 'pci': really_probe: bound device 0000:00:18.3 to driver k8temp k8temp 0000:00:18.3: __pm_runtime_idle()! k8temp 0000:00:18.3: __pm_runtime_idle() returns -11! initcall k8temp_init+0x0/0x45 returned 0 after 42672 usecs calling lis3lv02d_init_module+0x0/0x6b @ 1 bus: 'acpi': add driver lis3lv02d lis3lv02d driver loaded. initcall lis3lv02d_init_module+0x0/0x6b returned 0 after 5821 usecs calling init_lm70+0x0/0x40 @ 1 bus: 'spi': add driver lm70 initcall init_lm70+0x0/0x40 returned 0 after 2910 usecs calling sensors_lm75_init+0x0/0x40 @ 1 bus: 'i2c': add driver lm75 i2c-core: driver [lm75] registered initcall sensors_lm75_init+0x0/0x40 returned 0 after 6140 usecs calling sensors_lm83_init+0x0/0x40 @ 1 bus: 'i2c': add driver lm83 i2c-core: driver [lm83] registered initcall sensors_lm83_init+0x0/0x40 returned 0 after 6127 usecs calling sm_lm85_init+0x0/0x40 @ 1 bus: 'i2c': add driver lm85 i2c-core: driver [lm85] registered initcall sm_lm85_init+0x0/0x40 returned 0 after 6141 usecs calling sensors_lm90_init+0x0/0x40 @ 1 bus: 'i2c': add driver lm90 i2c-core: driver [lm90] registered initcall sensors_lm90_init+0x0/0x40 returned 0 after 6204 usecs calling sensors_lm92_init+0x0/0x40 @ 1 bus: 'i2c': add driver lm92 i2c-core: driver [lm92] registered initcall sensors_lm92_init+0x0/0x40 returned 0 after 6134 usecs calling sensors_lm95241_init+0x0/0x40 @ 1 bus: 'i2c': add driver lm95241 i2c-core: driver [lm95241] registered initcall sensors_lm95241_init+0x0/0x40 returned 0 after 6619 usecs calling ltc4245_init+0x0/0x40 @ 1 bus: 'i2c': add driver ltc4245 i2c-core: driver [ltc4245] registered initcall ltc4245_init+0x0/0x40 returned 0 after 6646 usecs calling max1111_init+0x0/0x40 @ 1 bus: 'spi': add driver max1111 initcall max1111_init+0x0/0x40 returned 0 after 3164 usecs calling pc87360_init+0x0/0x1f0 @ 1 pc87360: PC8736x not detected, module not inserted. initcall pc87360_init+0x0/0x1f0 returned -19 after 4559 usecs calling pc87427_init+0x0/0x178 @ 1 initcall pc87427_init+0x0/0x178 returned -19 after 10 usecs calling sm_sis5595_init+0x0/0x50 @ 1 bus: 'pci': add driver sis5595 initcall sm_sis5595_init+0x0/0x50 returned 0 after 3207 usecs calling smsc47b397_init+0x0/0x20f @ 1 initcall smsc47b397_init+0x0/0x20f returned -19 after 5 usecs calling sm_smsc47m1_init+0x0/0x2c1 @ 1 initcall sm_smsc47m1_init+0x0/0x2c1 returned -19 after 4 usecs calling smsc47m192_init+0x0/0x40 @ 1 bus: 'i2c': add driver smsc47m192 i2c-core: driver [smsc47m192] registered initcall smsc47m192_init+0x0/0x40 returned 0 after 7164 usecs calling sm_thmc50_init+0x0/0x40 @ 1 bus: 'i2c': add driver thmc50 i2c-core: driver [thmc50] registered initcall sm_thmc50_init+0x0/0x40 returned 0 after 6481 usecs calling tmp401_init+0x0/0x40 @ 1 bus: 'i2c': add driver tmp401 i2c-core: driver [tmp401] registered initcall tmp401_init+0x0/0x40 returned 0 after 6954 usecs calling tmp421_init+0x0/0x40 @ 1 bus: 'i2c': add driver tmp421 i2c-core: driver [tmp421] registered initcall tmp421_init+0x0/0x40 returned 0 after 6479 usecs calling vt1211_init+0x0/0x1b8 @ 1 initcall vt1211_init+0x0/0x1b8 returned -19 after 12 usecs calling sm_vt8231_init+0x0/0x50 @ 1 bus: 'pci': add driver vt8231 initcall sm_vt8231_init+0x0/0x50 returned 0 after 3127 usecs calling sensors_w83l785ts_init+0x0/0x40 @ 1 bus: 'i2c': add driver w83l785ts i2c-core: driver [w83l785ts] registered initcall sensors_w83l785ts_init+0x0/0x40 returned 0 after 6996 usecs calling sensors_w83l786ng_init+0x0/0x3d @ 1 bus: 'i2c': add driver w83l786ng i2c-core: driver [w83l786ng] registered initcall sensors_w83l786ng_init+0x0/0x3d returned 0 after 6995 usecs calling pcipcwd_init_module+0x0/0x70 @ 1 bus: 'pci': add driver pcwd_pci initcall pcipcwd_init_module+0x0/0x70 returned 0 after 3292 usecs calling wdtpci_init+0x0/0x45 @ 1 bus: 'pci': add driver wdt_pci initcall wdtpci_init+0x0/0x45 returned 0 after 3201 usecs calling usb_pcwd_init+0x0/0x70 @ 1 bus: 'usb': add driver pcwd_usb usbcore: registered new interface driver pcwd_usb pcwd_usb: Berkshire USB-PC Watchdog driver v1.02 initcall usb_pcwd_init+0x0/0x70 returned 0 after 12152 usecs calling twl4030_wdt_init+0x0/0x3d @ 1 bus: 'platform': add driver twl4030_wdt initcall twl4030_wdt_init+0x0/0x3d returned 0 after 3935 usecs calling acq_init+0x0/0x8b @ 1 WDT driver for Acquire single board computer initialising. bus: 'platform': add driver acquirewdt Registering platform device 'acquirewdt'. Parent at platform device: 'acquirewdt': device_add bus: 'platform': add device acquirewdt PM: Adding info for platform:acquirewdt bus: 'platform': driver_probe_device: matched device acquirewdt with driver acquirewdt bus: 'platform': really_probe: probing driver acquirewdt with device acquirewdt acquirewdt: I/O address 0x0043 already in use acquirewdt: probe of acquirewdt failed with error -5 platform acquirewdt: __pm_runtime_idle()! platform acquirewdt: __pm_runtime_idle() returns -11! initcall acq_init+0x0/0x8b returned 0 after 56671 usecs calling watchdog_init+0x0/0x1aa @ 1 initcall watchdog_init+0x0/0x1aa returned -19 after 46 usecs calling alim7101_wdt_init+0x0/0x1f5 @ 1 alim7101_wdt: Steve Hill . alim7101_wdt: ALi M7101 PMU not present - WDT not set initcall alim7101_wdt_init+0x0/0x1f5 returned -16 after 8876 usecs initcall alim7101_wdt_init+0x0/0x1f5 returned with error code -16 calling watchdog_init+0x0/0x8e @ 1 i6300ESB timer: Intel 6300ESB WatchDog Timer Driver v0.04 bus: 'platform': add driver i6300ESB timer Registering platform device 'i6300ESB timer'. Parent at platform device: 'i6300ESB timer': device_add bus: 'platform': add device i6300ESB timer PM: Adding info for platform:i6300ESB timer bus: 'platform': driver_probe_device: matched device i6300ESB timer with driver i6300ESB timer bus: 'platform': really_probe: probing driver i6300ESB timer with device i6300ESB timer platform i6300ESB timer: __pm_runtime_idle()! platform i6300ESB timer: __pm_runtime_idle() returns -11! initcall watchdog_init+0x0/0x8e returned 0 after 51604 usecs calling it8712f_wdt_init+0x0/0x263 @ 1 initcall it8712f_wdt_init+0x0/0x263 returned -19 after 53 usecs calling it87_wdt_init+0x0/0x610 @ 1 IT87 WDT: no device initcall it87_wdt_init+0x0/0x610 returned -19 after 1863 usecs calling hpwdt_init+0x0/0x50 @ 1 bus: 'pci': add driver hpwdt initcall hpwdt_init+0x0/0x50 returned 0 after 3049 usecs calling sc1200wdt_init+0x0/0x1a4 @ 1 sc1200wdt: build 20020303 bus: 'pnp': add driver scl200wdt sc1200wdt: io parameter must be specified bus: 'pnp': remove driver scl200wdt driver: 'scl200wdt': driver_release initcall sc1200wdt_init+0x0/0x1a4 returned -22 after 16399 usecs initcall sc1200wdt_init+0x0/0x1a4 returned with error code -22 calling pc87413_init+0x0/0xb7 @ 1 pc87413 WDT: Version 1.1 at io 0x2E device: 'watchdog': device_add PM: Adding info for No Bus:watchdog pc87413 WDT: initialized. timeout=1 min initcall pc87413_init+0x0/0xb7 returned 0 after 13539 usecs calling sbc60xxwdt_init+0x0/0x1c5 @ 1 sbc60xxwdt: cannot register miscdev on minor=130 (err=-16) initcall sbc60xxwdt_init+0x0/0x1c5 returned -16 after 5160 usecs initcall sbc60xxwdt_init+0x0/0x1c5 returned with error code -16 calling sbc8360_init+0x0/0x1e4 @ 1 sbc8360: failed to register misc device initcall sbc8360_init+0x0/0x1e4 returned -16 after 3559 usecs initcall sbc8360_init+0x0/0x1e4 returned with error code -16 calling wb_smsc_wdt_init+0x0/0x1fc @ 1 SMsC 37B787 watchdog component driver 1.1 initialising... smsc37b787_wdt: Unable to register miscdev on minor 130 initcall wb_smsc_wdt_init+0x0/0x1fc returned -16 after 10984 usecs initcall wb_smsc_wdt_init+0x0/0x1fc returned with error code -16 calling wdt_init+0x0/0x240 @ 1 w83697hf/hg WDT: WDT driver for W83697HF/HG initializing w83697hf/hg WDT: Looking for watchdog at address 0x2e w83697hf/hg WDT: watchdog found at address 0x2e w83697hf/hg WDT: cannot register miscdev on minor=130 (err=-16) initcall wdt_init+0x0/0x240 returned -16 after 19544 usecs initcall wdt_init+0x0/0x240 returned with error code -16 calling wdt_init+0x0/0x200 @ 1 WDT driver for the Winbond(TM) W83697UG/UF Super I/O chip initialising. w83697ug/uf WDT: No W83697UG/UF could be found initcall wdt_init+0x0/0x200 returned -19 after 10390 usecs calling w83877f_wdt_init+0x0/0x19e @ 1 w83877f_wdt: cannot register miscdev on minor=130 (err=-16) initcall w83877f_wdt_init+0x0/0x19e returned -16 after 5259 usecs initcall w83877f_wdt_init+0x0/0x19e returned with error code -16 calling w83977f_wdt_init+0x0/0x196 @ 1 W83977F WDT: W83977F WDT driver, v1.00 W83977F WDT: cannot register miscdev on minor=130 (err=-16) initcall w83977f_wdt_init+0x0/0x196 returned -16 after 8697 usecs initcall w83977f_wdt_init+0x0/0x196 returned with error code -16 calling watchdog_init+0x0/0xdc @ 1 epx_c3: cannot register miscdev on minor=130 (err=-16) initcall watchdog_init+0x0/0xdc returned -16 after 4820 usecs initcall watchdog_init+0x0/0xdc returned with error code -16 calling wm831x_wdt_init+0x0/0x3d @ 1 bus: 'platform': add driver wm831x-watchdog initcall wm831x_wdt_init+0x0/0x3d returned 0 after 4267 usecs calling watchdog_init+0x0/0xe3 @ 1 SoftDog: cannot register miscdev on minor=130 (err=-16) initcall watchdog_init+0x0/0xe3 returned -16 after 4889 usecs initcall watchdog_init+0x0/0xe3 returned with error code -16 calling init_ladder+0x0/0x40 @ 1 cpuidle: using governor ladder initcall init_ladder+0x0/0x40 returned 0 after 2794 usecs calling init_menu+0x0/0x40 @ 1 cpuidle: using governor menu initcall init_menu+0x0/0x40 returned 0 after 2598 usecs calling mmc_test_init+0x0/0x40 @ 1 bus: 'mmc': add driver mmc_test initcall mmc_test_init+0x0/0x40 returned 0 after 3252 usecs calling tifm_sd_init+0x0/0x40 @ 1 bus: 'tifm': add driver tifm_sd initcall tifm_sd_init+0x0/0x40 returned 0 after 3298 usecs calling cb710_mmc_init_module+0x0/0x40 @ 1 bus: 'platform': add driver cb710-mmc initcall cb710_mmc_init_module+0x0/0x40 returned 0 after 3763 usecs calling via_sd_drv_init+0x0/0x60 @ 1 via_sdmmc: VIA SD/MMC Card Reader driver (C) 2008 VIA Technologies, Inc. bus: 'pci': add driver via_sdmmc initcall via_sd_drv_init+0x0/0x60 returned 0 after 9719 usecs calling memstick_init+0x0/0xad @ 1 bus: 'memstick': registered device class 'memstick_host': registering initcall memstick_init+0x0/0xad returned 0 after 7328 usecs calling mspro_block_init+0x0/0xa3 @ 1 bus: 'memstick': add driver mspro_block initcall mspro_block_init+0x0/0xa3 returned 0 after 3932 usecs calling lp3944_module_init+0x0/0x40 @ 1 bus: 'i2c': add driver lp3944 i2c-core: driver [lp3944] registered initcall lp3944_module_init+0x0/0x40 returned 0 after 6478 usecs calling clevo_mail_led_init+0x0/0xcb @ 1 initcall clevo_mail_led_init+0x0/0xcb returned -19 after 2 usecs calling timer_trig_init+0x0/0x40 @ 1 initcall timer_trig_init+0x0/0x40 returned 0 after 85 usecs calling bl_trig_init+0x0/0x40 @ 1 initcall bl_trig_init+0x0/0x40 returned 0 after 3 usecs calling defon_trig_init+0x0/0x40 @ 1 initcall defon_trig_init+0x0/0x40 returned 0 after 3 usecs calling dcdrbu_init+0x0/0x16c @ 1 Registering platform device 'dell_rbu'. Parent at platform device: 'dell_rbu': device_add bus: 'platform': add device dell_rbu PM: Adding info for platform:dell_rbu platform dell_rbu: __pm_runtime_idle()! platform dell_rbu: __pm_runtime_idle() returns -11! initcall dcdrbu_init+0x0/0x16c returned 0 after 23817 usecs calling dcdbas_init+0x0/0x91 @ 1 bus: 'platform': add driver dcdbas Registering platform device 'dcdbas'. Parent at platform device: 'dcdbas': device_add bus: 'platform': add device dcdbas PM: Adding info for platform:dcdbas bus: 'platform': driver_probe_device: matched device dcdbas with driver dcdbas bus: 'platform': really_probe: probing driver dcdbas with device dcdbas dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) driver: 'dcdbas': driver_bound: bound to device 'dcdbas' bus: 'platform': really_probe: bound device dcdbas to driver dcdbas dcdbas dcdbas: __pm_runtime_idle()! dcdbas dcdbas: __pm_runtime_idle() returns -11! initcall dcdbas_init+0x0/0x91 returned 0 after 55749 usecs calling ibft_init+0x0/0x699 @ 1 No iBFT detected. initcall ibft_init+0x0/0x699 returned 0 after 1693 usecs calling ioat_init_module+0x0/0xa7 @ 1 ioatdma: Intel(R) QuickData Technology Driver 4.00 bus: 'pci': add driver ioatdma initcall ioat_init_module+0x0/0xa7 returned 0 after 8601 usecs calling hid_init+0x0/0x92 @ 1 bus: 'hid': registered device class 'hidraw': registering initcall hid_init+0x0/0x92 returned 0 after 6194 usecs calling a4_init+0x0/0x45 @ 1 bus: 'hid': add driver a4tech initcall a4_init+0x0/0x45 returned 0 after 3217 usecs calling apple_init+0x0/0x6b @ 1 bus: 'hid': add driver apple initcall apple_init+0x0/0x6b returned 0 after 3030 usecs calling belkin_init+0x0/0x50 @ 1 bus: 'hid': add driver belkin initcall belkin_init+0x0/0x50 returned 0 after 3106 usecs calling ch_init+0x0/0x50 @ 1 bus: 'hid': add driver cherry initcall ch_init+0x0/0x50 returned 0 after 3089 usecs calling ch_init+0x0/0x50 @ 1 bus: 'hid': add driver chicony initcall ch_init+0x0/0x50 returned 0 after 3167 usecs calling cp_init+0x0/0x50 @ 1 bus: 'hid': add driver cypress initcall cp_init+0x0/0x50 returned 0 after 3167 usecs calling dr_init+0x0/0x50 @ 1 bus: 'hid': add driver dragonrise initcall dr_init+0x0/0x50 returned 0 after 3424 usecs calling ez_init+0x0/0x50 @ 1 bus: 'hid': add driver ezkey initcall ez_init+0x0/0x50 returned 0 after 3127 usecs calling gyration_init+0x0/0x50 @ 1 bus: 'hid': add driver gyration initcall gyration_init+0x0/0x50 returned 0 after 3260 usecs calling ks_init+0x0/0x50 @ 1 bus: 'hid': add driver kensington initcall ks_init+0x0/0x50 returned 0 after 3434 usecs calling kye_init+0x0/0x50 @ 1 bus: 'hid': add driver kye initcall kye_init+0x0/0x50 returned 0 after 2827 usecs calling lg_init+0x0/0x50 @ 1 bus: 'hid': add driver logitech initcall lg_init+0x0/0x50 returned 0 after 3257 usecs calling ms_init+0x0/0x50 @ 1 bus: 'hid': add driver microsoft initcall ms_init+0x0/0x50 returned 0 after 3352 usecs calling mr_init+0x0/0x50 @ 1 bus: 'hid': add driver monterey initcall mr_init+0x0/0x50 returned 0 after 3255 usecs calling ntrig_init+0x0/0x50 @ 1 bus: 'hid': add driver ntrig initcall ntrig_init+0x0/0x50 returned 0 after 3010 usecs calling pl_init+0x0/0x50 @ 1 bus: 'hid': add driver pantherlord initcall pl_init+0x0/0x50 returned 0 after 3653 usecs calling pl_init+0x0/0x50 @ 1 bus: 'hid': add driver petalynx initcall pl_init+0x0/0x50 returned 0 after 3254 usecs calling samsung_init+0x0/0x50 @ 1 bus: 'hid': add driver samsung initcall samsung_init+0x0/0x50 returned 0 after 3180 usecs calling sjoy_init+0x0/0x50 @ 1 bus: 'hid': add driver smartjoyplus initcall sjoy_init+0x0/0x50 returned 0 after 3592 usecs calling sony_init+0x0/0x50 @ 1 bus: 'hid': add driver sony initcall sony_init+0x0/0x50 returned 0 after 2925 usecs calling sp_init+0x0/0x50 @ 1 bus: 'hid': add driver sunplus initcall sp_init+0x0/0x50 returned 0 after 3296 usecs calling ga_init+0x0/0x50 @ 1 bus: 'hid': add driver greenasia initcall ga_init+0x0/0x50 returned 0 after 3339 usecs calling tm_init+0x0/0x50 @ 1 bus: 'hid': add driver thrustmaster initcall tm_init+0x0/0x50 returned 0 after 3599 usecs calling ts_init+0x0/0x50 @ 1 bus: 'hid': add driver topseed initcall ts_init+0x0/0x50 returned 0 after 3172 usecs calling twinhan_init+0x0/0x50 @ 1 bus: 'hid': add driver twinhan initcall twinhan_init+0x0/0x50 returned 0 after 3182 usecs calling zp_init+0x0/0x50 @ 1 bus: 'hid': add driver zeroplus initcall zp_init+0x0/0x50 returned 0 after 3257 usecs calling hid_init+0x0/0x100 @ 1 bus: 'hid': add driver generic-usb bus: 'usb': add driver hiddev usbcore: registered new interface driver hiddev bus: 'usb': add driver usbhid usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver initcall hid_init+0x0/0x100 returned 0 after 21560 usecs calling usb_mouse_init+0x0/0x6b @ 1 bus: 'usb': add driver usbmouse usbcore: registered new interface driver usbmouse usbmouse: v1.6:USB HID Boot Protocol mouse driver initcall usb_mouse_init+0x0/0x6b returned 0 after 12162 usecs calling virtio_pci_init+0x0/0x84 @ 1 device: 'virtio-pci': device_add PM: Adding info for No Bus:virtio-pci bus: 'pci': add driver virtio-pci initcall virtio_pci_init+0x0/0x84 returned 0 after 9870 usecs calling fake_init+0x0/0x60 @ 1 Registering platform device 'ieee802154hardmac'. Parent at platform device: 'ieee802154hardmac': device_add bus: 'platform': add device ieee802154hardmac PM: Adding info for platform:ieee802154hardmac platform ieee802154hardmac: __pm_runtime_idle()! platform ieee802154hardmac: __pm_runtime_idle() returns -11! bus: 'platform': add driver ieee802154hardmac bus: 'platform': driver_probe_device: matched device ieee802154hardmac with driver ieee802154hardmac bus: 'platform': really_probe: probing driver ieee802154hardmac with device ieee802154hardmac device: 'wpan-phy0': device_add PM: Adding info for No Bus:wpan-phy0 device: 'hardwpan0': device_add PM: Adding info for No Bus:hardwpan0 ieee802154hardmac ieee802154hardmac: Added ieee802154 HardMAC hardware driver: 'ieee802154hardmac': driver_bound: bound to device 'ieee802154hardmac' bus: 'platform': really_probe: bound device ieee802154hardmac to driver ieee802154hardmac ieee802154hardmac ieee802154hardmac: __pm_runtime_idle()! ieee802154hardmac ieee802154hardmac: __pm_runtime_idle() returns -11! initcall fake_init+0x0/0x60 returned 0 after 95582 usecs calling flow_cache_init+0x0/0x159 @ 1 initcall flow_cache_init+0x0/0x159 returned 0 after 800 usecs calling pg_init+0x0/0x2bf @ 1 pktgen 2.72: Packet Generator for packet performance testing. initcall pg_init+0x0/0x2bf returned 0 after 5796 usecs calling llc_init+0x0/0x50 @ 1 initcall llc_init+0x0/0x50 returned 0 after 2 usecs calling llc2_init+0x0/0xf8 @ 1 NET: Registered protocol family 26 initcall llc2_init+0x0/0xf8 returned 0 after 3224 usecs calling snap_init+0x0/0x70 @ 1 initcall snap_init+0x0/0x70 returned 0 after 42 usecs calling rif_init+0x0/0xc0 @ 1 initcall rif_init+0x0/0xc0 returned 0 after 42 usecs calling blackhole_module_init+0x0/0x40 @ 1 initcall blackhole_module_init+0x0/0x40 returned 0 after 1 usecs calling police_init_module+0x0/0x40 @ 1 initcall police_init_module+0x0/0x40 returned 0 after 19 usecs calling mirred_init_module+0x0/0x50 @ 1 Mirror/redirect action on initcall mirred_init_module+0x0/0x50 returned 0 after 2354 usecs calling nat_init_module+0x0/0x40 @ 1 initcall nat_init_module+0x0/0x40 returned 0 after 1 usecs calling pedit_init_module+0x0/0x3d @ 1 initcall pedit_init_module+0x0/0x3d returned 0 after 1 usecs calling simp_init_module+0x0/0x63 @ 1 Simple TC action Loaded initcall simp_init_module+0x0/0x63 returned 0 after 2183 usecs calling skbedit_init_module+0x0/0x40 @ 1 initcall skbedit_init_module+0x0/0x40 returned 0 after 1 usecs calling cbq_module_init+0x0/0x40 @ 1 initcall cbq_module_init+0x0/0x40 returned 0 after 1 usecs calling htb_module_init+0x0/0x40 @ 1 initcall htb_module_init+0x0/0x40 returned 0 after 1 usecs calling hfsc_init+0x0/0x40 @ 1 initcall hfsc_init+0x0/0x40 returned 0 after 1 usecs calling red_module_init+0x0/0x40 @ 1 initcall red_module_init+0x0/0x40 returned 0 after 1 usecs calling gred_module_init+0x0/0x40 @ 1 initcall gred_module_init+0x0/0x40 returned 0 after 1 usecs calling ingress_module_init+0x0/0x40 @ 1 initcall ingress_module_init+0x0/0x40 returned 0 after 1 usecs calling dsmark_module_init+0x0/0x40 @ 1 initcall dsmark_module_init+0x0/0x40 returned 0 after 1 usecs calling sfq_module_init+0x0/0x40 @ 1 initcall sfq_module_init+0x0/0x40 returned 0 after 1 usecs calling tbf_module_init+0x0/0x40 @ 1 initcall tbf_module_init+0x0/0x40 returned 0 after 1 usecs calling teql_init+0x0/0x107 @ 1 device: 'teql0': device_add PM: Adding info for No Bus:teql0 initcall teql_init+0x0/0x107 returned 0 after 6525 usecs calling atm_init+0x0/0x40 @ 1 initcall atm_init+0x0/0x40 returned 0 after 1 usecs calling drr_init+0x0/0x40 @ 1 initcall drr_init+0x0/0x40 returned 0 after 1 usecs calling init_u32+0x0/0x80 @ 1 u32 classifier Performance counters on input device check on Actions configured initcall init_u32+0x0/0x80 returned 0 after 8541 usecs calling init_fw+0x0/0x40 @ 1 initcall init_fw+0x0/0x40 returned 0 after 1 usecs calling init_rsvp+0x0/0x40 @ 1 initcall init_rsvp+0x0/0x40 returned 0 after 1 usecs calling init_tcindex+0x0/0x40 @ 1 initcall init_tcindex+0x0/0x40 returned 0 after 1 usecs calling init_rsvp+0x0/0x40 @ 1 initcall init_rsvp+0x0/0x40 returned 0 after 1 usecs calling cls_flow_init+0x0/0x40 @ 1 initcall cls_flow_init+0x0/0x40 returned 0 after 1 usecs calling init_em_nbyte+0x0/0x40 @ 1 initcall init_em_nbyte+0x0/0x40 returned 0 after 18 usecs calling init_em_u32+0x0/0x40 @ 1 initcall init_em_u32+0x0/0x40 returned 0 after 1 usecs calling nfnetlink_init+0x0/0x88 @ 1 Netfilter messages via NETLINK v0.30. initcall nfnetlink_init+0x0/0x88 returned 0 after 3413 usecs calling nfnetlink_queue_init+0x0/0xd3 @ 1 initcall nfnetlink_queue_init+0x0/0xd3 returned 0 after 46 usecs calling nfnetlink_log_init+0x0/0x110 @ 1 initcall nfnetlink_log_init+0x0/0x110 returned 0 after 51 usecs calling xt_init+0x0/0x13b @ 1 initcall xt_init+0x0/0x13b returned 0 after 54 usecs calling tcpudp_mt_init+0x0/0x50 @ 1 initcall tcpudp_mt_init+0x0/0x50 returned 0 after 27 usecs calling classify_tg_init+0x0/0x40 @ 1 initcall classify_tg_init+0x0/0x40 returned 0 after 1 usecs calling hl_tg_init+0x0/0x50 @ 1 initcall hl_tg_init+0x0/0x50 returned 0 after 2 usecs calling led_tg_init+0x0/0x40 @ 1 initcall led_tg_init+0x0/0x40 returned 0 after 1 usecs calling mark_tg_init+0x0/0x40 @ 1 initcall mark_tg_init+0x0/0x40 returned 0 after 1 usecs calling xt_rateest_tg_init+0x0/0x70 @ 1 initcall xt_rateest_tg_init+0x0/0x70 returned 0 after 6 usecs calling tcpmss_tg_init+0x0/0x50 @ 1 initcall tcpmss_tg_init+0x0/0x50 returned 0 after 2 usecs calling tcpoptstrip_tg_init+0x0/0x50 @ 1 initcall tcpoptstrip_tg_init+0x0/0x50 returned 0 after 2 usecs calling trace_tg_init+0x0/0x3d @ 1 initcall trace_tg_init+0x0/0x3d returned 0 after 1 usecs calling dccp_mt_init+0x0/0x83 @ 1 initcall dccp_mt_init+0x0/0x83 returned 0 after 12 usecs calling esp_mt_init+0x0/0x50 @ 1 initcall esp_mt_init+0x0/0x50 returned 0 after 2 usecs calling hashlimit_mt_init+0x0/0x120 @ 1 initcall hashlimit_mt_init+0x0/0x120 returned 0 after 909 usecs calling hl_mt_init+0x0/0x50 @ 1 initcall hl_mt_init+0x0/0x50 returned 0 after 2 usecs calling iprange_mt_init+0x0/0x50 @ 1 initcall iprange_mt_init+0x0/0x50 returned 0 after 2 usecs calling mac_mt_init+0x0/0x40 @ 1 initcall mac_mt_init+0x0/0x40 returned 0 after 1 usecs calling multiport_mt_init+0x0/0x50 @ 1 initcall multiport_mt_init+0x0/0x50 returned 0 after 3 usecs calling owner_mt_init+0x0/0x40 @ 1 initcall owner_mt_init+0x0/0x40 returned 0 after 1 usecs calling pkttype_mt_init+0x0/0x40 @ 1 initcall pkttype_mt_init+0x0/0x40 returned 0 after 1 usecs calling policy_mt_init+0x0/0x50 @ 1 initcall policy_mt_init+0x0/0x50 returned 0 after 2 usecs calling quota_mt_init+0x0/0x40 @ 1 initcall quota_mt_init+0x0/0x40 returned 0 after 1 usecs calling xt_rateest_mt_init+0x0/0x40 @ 1 initcall xt_rateest_mt_init+0x0/0x40 returned 0 after 1 usecs calling realm_mt_init+0x0/0x3d @ 1 initcall realm_mt_init+0x0/0x3d returned 0 after 1 usecs calling recent_mt_init+0x0/0x103 @ 1 initcall recent_mt_init+0x0/0x103 returned 0 after 51 usecs calling string_mt_init+0x0/0x50 @ 1 initcall string_mt_init+0x0/0x50 returned 0 after 2 usecs calling tcpmss_mt_init+0x0/0x45 @ 1 initcall tcpmss_mt_init+0x0/0x45 returned 0 after 2 usecs calling time_mt_init+0x0/0xbb @ 1 xt_time: kernel timezone is -0000 initcall time_mt_init+0x0/0xbb returned 0 after 3031 usecs calling u32_mt_init+0x0/0x40 @ 1 initcall u32_mt_init+0x0/0x40 returned 0 after 1 usecs calling ip_vs_init+0x0/0xf2 @ 1 IPVS: Registered protocols (TCP, AH, ESP) IPVS: Connection hash table configured (size=4096, memory=64Kbytes) IPVS: Each connection entry needs 360 bytes at least IPVS: ipvs loaded. initcall ip_vs_init+0x0/0xf2 returned 0 after 17337 usecs calling ip_vs_rr_init+0x0/0x40 @ 1 IPVS: [rr] scheduler registered. initcall ip_vs_rr_init+0x0/0x40 returned 0 after 2961 usecs calling ip_vs_wrr_init+0x0/0x40 @ 1 IPVS: [wrr] scheduler registered. initcall ip_vs_wrr_init+0x0/0x40 returned 0 after 3029 usecs calling ip_vs_lc_init+0x0/0x3d @ 1 IPVS: [lc] scheduler registered. initcall ip_vs_lc_init+0x0/0x3d returned 0 after 2944 usecs calling ip_vs_lblc_init+0x0/0x6d @ 1 IPVS: [lblc] scheduler registered. initcall ip_vs_lblc_init+0x0/0x6d returned 0 after 3123 usecs calling ip_vs_lblcr_init+0x0/0x76 @ 1 IPVS: [lblcr] scheduler registered. initcall ip_vs_lblcr_init+0x0/0x76 returned 0 after 3207 usecs calling ip_vs_sh_init+0x0/0x40 @ 1 IPVS: [sh] scheduler registered. initcall ip_vs_sh_init+0x0/0x40 returned 0 after 2944 usecs calling ip_vs_nq_init+0x0/0x3d @ 1 IPVS: [nq] scheduler registered. initcall ip_vs_nq_init+0x0/0x3d returned 0 after 2944 usecs calling ip_vs_ftp_init+0x0/0xc3 @ 1 IPVS: ftp: loaded support on port[0] = 21 initcall ip_vs_ftp_init+0x0/0xc3 returned 0 after 3766 usecs calling sysctl_ipv4_init+0x0/0x76 @ 1 initcall sysctl_ipv4_init+0x0/0x76 returned 0 after 32 usecs calling ipip_init+0x0/0x95 @ 1 IPv4 over IPv4 tunneling driver device: 'tunl0': device_add PM: Adding info for No Bus:tunl0 initcall ipip_init+0x0/0x95 returned 0 after 9452 usecs calling init_syncookies+0x0/0x50 @ 1 initcall init_syncookies+0x0/0x50 returned 0 after 34 usecs calling ipcomp4_init+0x0/0xa0 @ 1 initcall ipcomp4_init+0x0/0xa0 returned 0 after 3 usecs calling ipip_init+0x0/0xf0 @ 1 initcall ipip_init+0x0/0xf0 returned 0 after 3 usecs calling xfrm4_beet_init+0x0/0x50 @ 1 initcall xfrm4_beet_init+0x0/0x50 returned 0 after 1 usecs calling tunnel4_init+0x0/0xa0 @ 1 initcall tunnel4_init+0x0/0xa0 returned 0 after 1 usecs calling xfrm4_transport_init+0x0/0x50 @ 1 initcall xfrm4_transport_init+0x0/0x50 returned 0 after 1 usecs calling ipv4_netfilter_init+0x0/0x40 @ 1 initcall ipv4_netfilter_init+0x0/0x40 returned 0 after 22 usecs calling ip_queue_init+0x0/0x165 @ 1 initcall ip_queue_init+0x0/0x165 returned 0 after 122 usecs calling inet_diag_init+0x0/0x95 @ 1 initcall inet_diag_init+0x0/0x95 returned 0 after 42 usecs calling tcp_diag_init+0x0/0x40 @ 1 initcall tcp_diag_init+0x0/0x40 returned 0 after 20 usecs calling cubictcp_register+0x0/0x9d @ 1 TCP cubic registered initcall cubictcp_register+0x0/0x9d returned 0 after 1919 usecs calling inet6_init+0x0/0x314 @ 1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions tunl0: Disabled Privacy Extensions initcall inet6_init+0x0/0x314 returned 0 after 20846 usecs calling ah6_init+0x0/0xa0 @ 1 initcall ah6_init+0x0/0xa0 returned 0 after 2 usecs calling esp6_init+0x0/0xa0 @ 1 initcall esp6_init+0x0/0xa0 returned 0 after 1 usecs calling xfrm6_mode_tunnel_init+0x0/0x50 @ 1 initcall xfrm6_mode_tunnel_init+0x0/0x50 returned 0 after 1 usecs calling xfrm6_ro_init+0x0/0x50 @ 1 initcall xfrm6_ro_init+0x0/0x50 returned 0 after 1 usecs calling xfrm6_beet_init+0x0/0x50 @ 1 initcall xfrm6_beet_init+0x0/0x50 returned 0 after 1 usecs calling mip6_init+0x0/0xf0 @ 1 Mobile IPv6 initcall mip6_init+0x0/0xf0 returned 0 after 1160 usecs calling ip6_tables_init+0x0/0xd1 @ 1 ip6_tables: (C) 2000-2006 Netfilter Core Team initcall ip6_tables_init+0x0/0xd1 returned 0 after 4131 usecs calling ip6table_mangle_init+0x0/0x6c @ 1 initcall ip6table_mangle_init+0x0/0x6c returned 0 after 54 usecs calling ip6table_raw_init+0x0/0x6c @ 1 initcall ip6table_raw_init+0x0/0x6c returned 0 after 30 usecs calling ip6table_security_init+0x0/0x6c @ 1 initcall ip6table_security_init+0x0/0x6c returned 0 after 37 usecs calling ah_mt6_init+0x0/0x40 @ 1 initcall ah_mt6_init+0x0/0x40 returned 0 after 1 usecs calling ipv6header_mt6_init+0x0/0x40 @ 1 initcall ipv6header_mt6_init+0x0/0x40 returned 0 after 1 usecs calling hbh_mt6_init+0x0/0x50 @ 1 initcall hbh_mt6_init+0x0/0x50 returned 0 after 2 usecs calling rt_mt6_init+0x0/0x40 @ 1 initcall rt_mt6_init+0x0/0x40 returned 0 after 1 usecs calling log_tg6_init+0x0/0x55 @ 1 initcall log_tg6_init+0x0/0x55 returned 0 after 3 usecs calling sit_init+0x0/0x97 @ 1 IPv6 over IPv4 tunneling driver device: 'sit0': device_add PM: Adding info for No Bus:sit0 sit0: Disabled Privacy Extensions initcall sit_init+0x0/0x97 returned 0 after 13201 usecs calling packet_init+0x0/0x74 @ 1 NET: Registered protocol family 17 initcall packet_init+0x0/0x74 returned 0 after 3194 usecs calling dsa_init_module+0x0/0x40 @ 1 bus: 'platform': add driver dsa initcall dsa_init_module+0x0/0x40 returned 0 after 3297 usecs calling atalk_init+0x0/0xd0 @ 1 NET: Registered protocol family 5 initcall atalk_init+0x0/0xd0 returned 0 after 3205 usecs calling x25_init+0x0/0x90 @ 1 NET: Registered protocol family 9 X.25 for Linux Version 0.2 initcall x25_init+0x0/0x90 returned 0 after 5563 usecs calling lapb_init+0x0/0x2d @ 1 initcall lapb_init+0x0/0x2d returned 0 after 0 usecs calling nr_proto_init+0x0/0x2e0 @ 1 device: 'nr0': device_add PM: Adding info for No Bus:nr0 device: 'nr1': device_add PM: Adding info for No Bus:nr1 device: 'nr2': device_add PM: Adding info for No Bus:nr2 device: 'nr3': device_add PM: Adding info for No Bus:nr3 NET: Registered protocol family 6 initcall nr_proto_init+0x0/0x2e0 returned 0 after 28706 usecs calling rose_proto_init+0x0/0x308 @ 1 device: 'rose0': device_add PM: Adding info for No Bus:rose0 device: 'rose1': device_add PM: Adding info for No Bus:rose1 device: 'rose2': device_add PM: Adding info for No Bus:rose2 device: 'rose3': device_add PM: Adding info for No Bus:rose3 device: 'rose4': device_add PM: Adding info for No Bus:rose4 device: 'rose5': device_add PM: Adding info for No Bus:rose5 device: 'rose6': device_add PM: Adding info for No Bus:rose6 device: 'rose7': device_add PM: Adding info for No Bus:rose7 device: 'rose8': device_add PM: Adding info for No Bus:rose8 device: 'rose9': device_add PM: Adding info for No Bus:rose9 NET: Registered protocol family 11 initcall rose_proto_init+0x0/0x308 returned 0 after 69731 usecs calling ax25_init+0x0/0xe1 @ 1 NET: Registered protocol family 3 initcall ax25_init+0x0/0xe1 returned 0 after 3136 usecs calling ircomm_init+0x0/0xe0 @ 1 IrCOMM protocol (Dag Brattli) initcall ircomm_init+0x0/0xe0 returned 0 after 2718 usecs calling ircomm_tty_init+0x0/0x1a8 @ 1 device: 'ircomm0': device_add PM: Adding info for No Bus:ircomm0 device: 'ircomm1': device_add PM: Adding info for No Bus:ircomm1 device: 'ircomm2': device_add PM: Adding info for No Bus:ircomm2 device: 'ircomm3': device_add PM: Adding info for No Bus:ircomm3 device: 'ircomm4': device_add PM: Adding info for No Bus:ircomm4 device: 'ircomm5': device_add PM: Adding info for No Bus:ircomm5 device: 'ircomm6': device_add PM: Adding info for No Bus:ircomm6 device: 'ircomm7': device_add PM: Adding info for No Bus:ircomm7 device: 'ircomm8': device_add PM: Adding info for No Bus:ircomm8 device: 'ircomm9': device_add PM: Adding info for No Bus:ircomm9 device: 'ircomm10': device_add PM: Adding info for No Bus:ircomm10 device: 'ircomm11': device_add PM: Adding info for No Bus:ircomm11 device: 'ircomm12': device_add PM: Adding info for No Bus:ircomm12 device: 'ircomm13': device_add PM: Adding info for No Bus:ircomm13 device: 'ircomm14': device_add PM: Adding info for No Bus:ircomm14 device: 'ircomm15': device_add PM: Adding info for No Bus:ircomm15 device: 'ircomm16': device_add PM: Adding info for No Bus:ircomm16 device: 'ircomm17': device_add PM: Adding info for No Bus:ircomm17 device: 'ircomm18': device_add PM: Adding info for No Bus:ircomm18 device: 'ircomm19': device_add PM: Adding info for No Bus:ircomm19 device: 'ircomm20': device_add PM: Adding info for No Bus:ircomm20 device: 'ircomm21': device_add PM: Adding info for No Bus:ircomm21 device: 'ircomm22': device_add PM: Adding info for No Bus:ircomm22 device: 'ircomm23': device_add PM: Adding info for No Bus:ircomm23 device: 'ircomm24': device_add PM: Adding info for No Bus:ircomm24 device: 'ircomm25': device_add PM: Adding info for No Bus:ircomm25 device: 'ircomm26': device_add PM: Adding info for No Bus:ircomm26 device: 'ircomm27': device_add PM: Adding info for No Bus:ircomm27 device: 'ircomm28': device_add PM: Adding info for No Bus:ircomm28 device: 'ircomm29': device_add PM: Adding info for No Bus:ircomm29 device: 'ircomm30': device_add PM: Adding info for No Bus:ircomm30 device: 'ircomm31': device_add PM: Adding info for No Bus:ircomm31 initcall ircomm_tty_init+0x0/0x1a8 returned 0 after 209937 usecs calling af_rxrpc_init+0x0/0x1cc @ 1 NET: Registered protocol family 33 initcall af_rxrpc_init+0x0/0x1cc returned 0 after 5123 usecs calling rxkad_init+0x0/0x9c @ 1 RxRPC: Registered security type 2 'rxkad' initcall rxkad_init+0x0/0x9c returned 0 after 4313 usecs calling atm_clip_init+0x0/0xe5 @ 1 initcall atm_clip_init+0x0/0xe5 returned 0 after 939 usecs calling lane_module_init+0x0/0x8b @ 1 lec.c: Sep 30 2009 11:54:30 initialized initcall lane_module_init+0x0/0x8b returned 0 after 3560 usecs calling pppoatm_init+0x0/0x40 @ 1 initcall pppoatm_init+0x0/0x40 returned 0 after 1 usecs calling decnet_init+0x0/0xba @ 1 NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team DECnet: Routing cache hash table of 512 buckets, 36Kbytes NET: Registered protocol family 12 initcall decnet_init+0x0/0xba returned 0 after 18806 usecs calling dn_rtmsg_init+0x0/0x95 @ 1 initcall dn_rtmsg_init+0x0/0x95 returned 0 after 39 usecs calling econet_proto_init+0x0/0x207 @ 1 NET: Registered protocol family 19 initcall econet_proto_init+0x0/0x207 returned 0 after 3282 usecs calling phonet_init+0x0/0xa5 @ 1 NET: Registered protocol family 35 initcall phonet_init+0x0/0xa5 returned 0 after 4024 usecs calling pep_register+0x0/0x50 @ 1 initcall pep_register+0x0/0x50 returned 0 after 776 usecs calling vlan_proto_init+0x0/0xf0 @ 1 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller initcall vlan_proto_init+0x0/0xf0 returned 0 after 10651 usecs calling dccp_init+0x0/0x3c0 @ 1 CCID: Activated CCID 2 (TCP-like) CCID: Activated CCID 3 (TCP-Friendly Rate Control) initcall dccp_init+0x0/0x3c0 returned 0 after 23604 usecs calling dccp_v4_init+0x0/0xac @ 1 initcall dccp_v4_init+0x0/0xac returned 0 after 2455 usecs calling dccp_v6_init+0x0/0xaf @ 1 initcall dccp_v6_init+0x0/0xaf returned 0 after 2958 usecs calling dccp_diag_init+0x0/0x40 @ 1 initcall dccp_diag_init+0x0/0x40 returned 0 after 2 usecs calling sctp_init+0x0/0x86f @ 1 SCTP: Hash tables configured (established 16384 bind 14563) sctp_init_sock(sk: ffff88003c858000) initcall sctp_init+0x0/0x86f returned 0 after 15815 usecs calling tipc_init+0x0/0xf1 @ 1 TIPC: Activated (version 1.6.4 compiled Sep 30 2009 11:54:40) NET: Registered protocol family 30 TIPC: Started in single node mode initcall tipc_init+0x0/0xf1 returned 0 after 15097 usecs calling dcbnl_init+0x0/0x60 @ 1 initcall dcbnl_init+0x0/0x60 returned 0 after 1 usecs calling ieee802154_nl_init+0x0/0xb4 @ 1 initcall ieee802154_nl_init+0x0/0xb4 returned 0 after 181 usecs calling af_ieee802154_init+0x0/0xac @ 1 NET: Registered protocol family 36 initcall af_ieee802154_init+0x0/0xac returned 0 after 4877 usecs calling wimax_subsys_init+0x0/0x27c @ 1 initcall wimax_subsys_init+0x0/0x27c returned 0 after 125 usecs calling mce_debugfs_init+0x0/0x76 @ 1 initcall mce_debugfs_init+0x0/0x76 returned 0 after 53 usecs calling severities_debugfs_init+0x0/0x70 @ 1 initcall severities_debugfs_init+0x0/0x70 returned 0 after 22 usecs calling hpet_insert_resource+0x0/0x4a @ 1 initcall hpet_insert_resource+0x0/0x4a returned 1 after 0 usecs initcall hpet_insert_resource+0x0/0x4a returned with error code 1 calling lapic_insert_resource+0x0/0x6f @ 1 initcall lapic_insert_resource+0x0/0x6f returned 0 after 3 usecs calling init_lapic_nmi_sysfs+0x0/0x60 @ 1 initcall init_lapic_nmi_sysfs+0x0/0x60 returned 0 after 0 usecs calling io_apic_bug_finalize+0x0/0x42 @ 1 initcall io_apic_bug_finalize+0x0/0x42 returned 0 after 0 usecs calling check_early_ioremap_leak+0x0/0xa0 @ 1 initcall check_early_ioremap_leak+0x0/0xa0 returned 0 after 0 usecs calling sched_init_debug+0x0/0x4b @ 1 initcall sched_init_debug+0x0/0x4b returned 0 after 25 usecs calling init_oops_id+0x0/0x60 @ 1 initcall init_oops_id+0x0/0x60 returned 0 after 8 usecs calling disable_boot_consoles+0x0/0x75 @ 1 initcall disable_boot_consoles+0x0/0x75 returned 0 after 0 usecs calling pm_qos_power_init+0x0/0x108 @ 1 device: 'cpu_dma_latency': device_add PM: Adding info for No Bus:cpu_dma_latency device: 'network_latency': device_add PM: Adding info for No Bus:network_latency device: 'network_throughput': device_add PM: Adding info for No Bus:network_throughput initcall pm_qos_power_init+0x0/0x108 returned 0 after 24021 usecs calling software_resume+0x0/0x340 @ 1 initcall software_resume+0x0/0x340 returned -2 after 22 usecs initcall software_resume+0x0/0x340 returned with error code -2 calling max_swapfiles_check+0x0/0x2d @ 1 initcall max_swapfiles_check+0x0/0x2d returned 0 after 0 usecs calling kmemleak_late_init+0x0/0xb2 @ 1 kmemleak: Kernel memory leak detector initialized initcall kmemleak_late_init+0x0/0xb2 returned 0 after 4693 usecs calling init_ima+0x0/0x4d @ 1 kmemleak: Automatic memory scanning thread started No TPM chip found, activating TPM-bypass! initcall init_ima+0x0/0x4d returned 0 after 9290 usecs calling random32_reseed+0x0/0x88 @ 1 initcall random32_reseed+0x0/0x88 returned 0 after 8 usecs calling pci_resource_alignment_sysfs_init+0x0/0x45 @ 1 initcall pci_resource_alignment_sysfs_init+0x0/0x45 returned 0 after 12 usecs calling pci_sysfs_init+0x0/0x7d @ 1 initcall pci_sysfs_init+0x0/0x7d returned 0 after 1627 usecs calling seqgen_init+0x0/0x40 @ 1 initcall seqgen_init+0x0/0x40 returned 0 after 19 usecs calling scsi_complete_async_scans+0x0/0x140 @ 1 initcall scsi_complete_async_scans+0x0/0x140 returned 0 after 1 usecs calling edd_init+0x0/0x2e3 @ 1 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found initcall edd_init+0x0/0x2e3 returned 0 after 5313 usecs calling memmap_init+0x0/0xd5 @ 1 initcall memmap_init+0x0/0xd5 returned 0 after 422 usecs calling dmatest_init+0x0/0x189 @ 1 initcall dmatest_init+0x0/0x189 returned 0 after 29 usecs calling tcp_congestion_default+0x0/0x40 @ 1 initcall tcp_congestion_default+0x0/0x40 returned 0 after 2 usecs calling ip_auto_config+0x0/0xfbc @ 1 initcall ip_auto_config+0x0/0xfbc returned 0 after 42 usecs calling initialize_hashrnd+0x0/0x40 @ 1 initcall initialize_hashrnd+0x0/0x40 returned 0 after 5 usecs async_waiting @ 1 async_continuing @ 1 after 1 usec EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly on device 8:1. async_waiting @ 1 async_continuing @ 1 after 1 usec Freeing unused kernel memory: 800k freed Write protecting the kernel read-only data: 19852k Testing CPA: undo ffffffff81009000-ffffffff8236c000 Testing CPA: again Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist. runlevel used greatest stack depth: 3592 bytes left mount used greatest stack depth: 2528 bytes left sed used greatest stack depth: 2320 bytes left CPA self-test: 4k 2864 large 506 gb 0 x 3066[ffff880000000000-ffff88003fc00000] miss 0 4k 147248 large 224 gb 0 x 147168[ffff880000000000-ffff88003fdff000] miss 0 4k 147248 large 224 gb 0 x 147168[ffff880000000000-ffff88003fdff000] miss 0 ok. Press any key to enter the menu