| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 01 Oct 2009 09:42:43 +0200
From: Tomaz Mertelj <tomaz.mertelj@...st.arnes.si>
To: Andrew Morton <akpm@...ux-foundation.org>
Cc: khali@...ux-fr.org, linux-kernel@...r.kernel.org,
lm-sensors@...sensors.org
Subject: Re: [lm-sensors] [PATCH] hwmon: Driver for Texas Instruments
amc6821 chip
At 12:44 30. 9. 2009 -0700, Andrew Morton wrote:
>On Wed, 23 Sep 2009 11:32:47 +0200
>tomaz.mertelj@...st.arnes.si wrote:
>
> > On Wed, 9 Sep 2009 09:34:35 +0200
> > Jean Delvare <khali@...ux-fr.org> wrote:
> >
> > > > And then do all the real work in a common function? Rather than
> > > > expanding tens of copies of the same thing?
> > >
> > > Yes please. We got rid of macro-generated callbacks in most hwmon
> > > drivers a couple years ago already.
> >
> > Here is an incremental patch to TI amc6821 chip hwmon driver:
>
>The patch is hopelessly wordwrapped. Please fix and resend?
Sorry,
I was trying to solve \n\r by posting via a web browser on a linux
desktop and did not noticed the wrapping.
Here I resend the patch from a linux mail program. It should be ok this
time.
---
Here is an incremental patch to TI amc6821 chip hwmon driver:
I got rid of macro generated callbacks to reduce memory footprint.
simple_strtol was replaced by strict_strtol.
Fixed some errors in documentation.
---
Signed-off-by: Tomaz Mertelj tomaz.mertelj(at)guest.arnes.si
diff --git a/Documentation/hwmon/amc6821 b/Documentation/hwmon/amc6821
index b7cba86..bc3ab6c 100644
--- a/Documentation/hwmon/amc6821
+++ b/Documentation/hwmon/amc6821
@@ -46,12 +46,12 @@ fan1_div rw Fan divisor can be either 2 or 4.
pwm1 rw pwm1
pwm1_enable rw regulator mode, 1=open loop, 2=fan controlled
by remote temperature, 3=fan controlled by
- combination of on-chip temperature and
+ combination of the on-chip temperature and
remote-sensor temperature,
pwm1_auto_channels_temp ro 1 if pwm_enable==2, 3 if pwm_enable==3
pwm1_auto_point1_pwm ro Hardwired to 0, shared for both
temperature channels.
-pwm1_auto_point2_pwm rw This value, shared for both temperature
+pwm1_auto_point2_pwm rw This value is shared for both temperature
channels.
pwm1_auto_point3_pwm rw Hardwired to 255, shared for both
temperature channels.
@@ -61,9 +61,9 @@ temp1_auto_point1_temp ro Hardwired to temp2_auto_point1_temp
temp1_auto_point2_temp rw The low-temperature limit of the proportional
range. Below this temperature
pwm1 = pwm1_auto_point2_pwm. It can go from
- 0 degree C and 124 degree C in steps of
+ 0 degree C to 124 degree C in steps of
4 degree C. Read it out after writing to get
- actual value.
+ the actual value.
temp1_auto_point3_temp rw Above this temperature fan runs at maximum
speed. It can go from temp1_auto_point2_temp.
It can only have certain discrete values
@@ -72,13 +72,13 @@ temp1_auto_point3_temp rw Above this temperature fan runs at maximum
writing to get the actual value.
temp2_auto_point1_temp rw Must be between 0 degree C and 63 degree C and
- it defines passive cooling temperature.
+ it defines the passive cooling temperature.
Below this temperature the fan stops in
the closed loop mode.
temp2_auto_point2_temp rw The low-temperature limit of the proportional
range. Below this temperature
pwm1 = pwm1_auto_point2_pwm. It can go from
- 0 degree C and 124 degree C in steps
+ 0 degree C to 124 degree C in steps
of 4 degree C.
temp2_auto_point3_temp rw Above this temperature fan runs at maximum
diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c
index 6905c5e..26e7635 100644
--- a/drivers/hwmon/amc6821.c
+++ b/drivers/hwmon/amc6821.c
@@ -123,6 +123,31 @@ I2C_CLIENT_INSMOD_1(amc6821);
#define AMC6821_STAT2_L_THERM 0x40
#define AMC6821_STAT2_THERM_IN 0x80
+enum {IDX_TEMP1_INPUT = 0, IDX_TEMP1_MIN, IDX_TEMP1_MAX,
+ IDX_TEMP1_CRIT, IDX_TEMP2_INPUT, IDX_TEMP2_MIN,
+ IDX_TEMP2_MAX, IDX_TEMP2_CRIT,
+ TEMP_IDX_LEN, };
+
+static const u8 temp_reg[] = {AMC6821_REG_LTEMP_HI,
+ AMC6821_REG_LTEMP_LIMIT_MIN,
+ AMC6821_REG_LTEMP_LIMIT_MAX,
+ AMC6821_REG_LTEMP_CRIT,
+ AMC6821_REG_RTEMP_HI,
+ AMC6821_REG_RTEMP_LIMIT_MIN,
+ AMC6821_REG_RTEMP_LIMIT_MAX,
+ AMC6821_REG_RTEMP_CRIT, };
+
+enum {IDX_FAN1_INPUT = 0, IDX_FAN1_MIN, IDX_FAN1_MAX,
+ FAN1_IDX_LEN, };
+
+static const u8 fan_reg_low[] = {AMC6821_REG_TDATA_LOW,
+ AMC6821_REG_TACH_LLIMITL,
+ AMC6821_REG_TACH_HLIMITL, };
+
+
+static const u8 fan_reg_hi[] = {AMC6821_REG_TDATA_HI,
+ AMC6821_REG_TACH_LLIMITH,
+ AMC6821_REG_TACH_HLIMITH, };
static int amc6821_probe(
struct i2c_client *client,
@@ -170,19 +195,9 @@ struct amc6821_data {
unsigned long last_updated; /* in jiffies */
/* register values */
- int temp1_input;
- int temp1_min;
- int temp1_max;
- int temp1_crit;
-
- int temp2_input;
- int temp2_min;
- int temp2_max;
- int temp2_crit;
-
- u16 fan1_input;
- u16 fan1_min;
- u16 fan1_max;
+ int temp[TEMP_IDX_LEN];
+
+ u16 fan[FAN1_IDX_LEN];
u8 fan1_div;
u8 pwm1;
@@ -197,72 +212,87 @@ struct amc6821_data {
};
-#define get_temp_para(name) \
-static ssize_t get_##name(\
- struct device *dev,\
- struct device_attribute *devattr,\
- char *buf)\
-{\
- struct amc6821_data *data = amc6821_update_device(dev);\
- return sprintf(buf, "%d\n", data->name * 1000);\
+static ssize_t get_temp(
+ struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct amc6821_data *data = amc6821_update_device(dev);
+ int ix = to_sensor_dev_attr(devattr)->index;
+
+ return sprintf(buf, "%d\n", data->temp[ix] * 1000);
}
-get_temp_para(temp1_input);
-get_temp_para(temp1_min);
-get_temp_para(temp1_max);
-get_temp_para(temp2_input);
-get_temp_para(temp2_min);
-get_temp_para(temp2_max);
-get_temp_para(temp1_crit);
-get_temp_para(temp2_crit);
-
-#define set_temp_para(name, reg)\
-static ssize_t set_##name(\
- struct device *dev,\
- struct device_attribute *attr,\
- const char *buf,\
- size_t count)\
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct amc6821_data *data = i2c_get_clientdata(client); \
- int val = simple_strtol(buf, NULL, 10); \
- \
- mutex_lock(&data->update_lock); \
- data->name = SENSORS_LIMIT(val / 1000, -128, 127); \
- if (i2c_smbus_write_byte_data(client, reg, data->name)) {\
- dev_err(&client->dev, "Register write error, aborting.\n");\
- count = -EIO;\
- } \
- mutex_unlock(&data->update_lock); \
- return count; \
+
+
+static ssize_t set_temp(
+ struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct amc6821_data *data = i2c_get_clientdata(client);
+ int ix = to_sensor_dev_attr(attr)->index;
+ long val;
+
+ int ret = strict_strtol(buf, 10, &val);
+ if (ret)
+ return ret;
+ val = SENSORS_LIMIT(val / 1000, -128, 127);
+
+ mutex_lock(&data->update_lock);
+ data->temp[ix] = val;
+ if (i2c_smbus_write_byte_data(client, temp_reg[ix], data->temp[ix])) {
+ dev_err(&client->dev, "Register write error, aborting.\n");
+ count = -EIO;
+ }
+ mutex_unlock(&data->update_lock);
+ return count;
}
-set_temp_para(temp1_min, AMC6821_REG_LTEMP_LIMIT_MIN);
-set_temp_para(temp1_max, AMC6821_REG_LTEMP_LIMIT_MAX);
-set_temp_para(temp2_min, AMC6821_REG_RTEMP_LIMIT_MIN);
-set_temp_para(temp2_max, AMC6821_REG_RTEMP_LIMIT_MAX);
-set_temp_para(temp1_crit, AMC6821_REG_LTEMP_CRIT);
-set_temp_para(temp2_crit, AMC6821_REG_RTEMP_CRIT);
-
-#define get_temp_alarm(name, reg, mask)\
-static ssize_t get_##name(\
- struct device *dev, \
- struct device_attribute *devattr,\
- char *buf)\
-{\
- struct amc6821_data *data = amc6821_update_device(dev);\
- if (data->reg & mask)\
- return sprintf(buf, "1");\
- else \
- return sprintf(buf, "0");\
-} \
-
-get_temp_alarm(temp1_min_alarm, stat1, AMC6821_STAT1_LTL)
-get_temp_alarm(temp1_max_alarm, stat1, AMC6821_STAT1_LTH)
-get_temp_alarm(temp2_min_alarm, stat1, AMC6821_STAT1_RTL)
-get_temp_alarm(temp2_max_alarm, stat1, AMC6821_STAT1_RTH)
-get_temp_alarm(temp1_crit_alarm, stat2, AMC6821_STAT2_LTC)
-get_temp_alarm(temp2_crit_alarm, stat2, AMC6821_STAT2_RTC)
+
+
+
+static ssize_t get_temp_alarm(
+ struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct amc6821_data *data = amc6821_update_device(dev);
+ int ix = to_sensor_dev_attr(devattr)->index;
+ u8 flag;
+
+ switch (ix) {
+ case IDX_TEMP1_MIN:
+ flag = data->stat1 & AMC6821_STAT1_LTL;
+ break;
+ case IDX_TEMP1_MAX:
+ flag = data->stat1 & AMC6821_STAT1_LTH;
+ break;
+ case IDX_TEMP1_CRIT:
+ flag = data->stat2 & AMC6821_STAT2_LTC;
+ break;
+ case IDX_TEMP2_MIN:
+ flag = data->stat1 & AMC6821_STAT1_RTL;
+ break;
+ case IDX_TEMP2_MAX:
+ flag = data->stat1 & AMC6821_STAT1_RTH;
+ break;
+ case IDX_TEMP2_CRIT:
+ flag = data->stat2 & AMC6821_STAT2_RTC;
+ break;
+ default:
+ dev_dbg(dev, "Unknown attr->index (%d).\n", ix);
+ return -EINVAL;
+ }
+ if (flag)
+ return sprintf(buf, "1");
+ else
+ return sprintf(buf, "0");
+}
+
+
static ssize_t get_temp2_fault(
@@ -294,7 +324,10 @@ static ssize_t set_pwm1(
{
struct i2c_client *client = to_i2c_client(dev);
struct amc6821_data *data = i2c_get_clientdata(client);
- int val = simple_strtol(buf, NULL, 10);
+ long val;
+ int ret = strict_strtol(buf, 10, &val);
+ if (ret)
+ return ret;
mutex_lock(&data->update_lock);
data->pwm1 = SENSORS_LIMIT(val , 0, 255);
@@ -320,9 +353,12 @@ static ssize_t set_pwm1_enable(
{
struct i2c_client *client = to_i2c_client(dev);
struct amc6821_data *data = i2c_get_clientdata(client);
- int val = simple_strtol(buf, NULL, 10);
+ long val;
+ int config = strict_strtol(buf, 10, &val);
+ if (config)
+ return config;
- int config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1);
+ config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1);
if (config < 0) {
dev_err(&client->dev,
"Error reading configuration register, aborting.\n");
@@ -366,101 +402,147 @@ static ssize_t get_pwm1_auto_channels_temp(
}
-#define get_auto_point(name)\
-static ssize_t get_##name(\
- struct device *dev,\
- struct device_attribute *devattr,\
- char *buf)\
-{\
- int nr = to_sensor_dev_attr(devattr)->index;\
- struct amc6821_data *data = amc6821_update_device(dev);\
- return sprintf(buf, "%d\n", data->name[nr] * 1000);\
+static ssize_t get_temp_auto_point_temp(
+ struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ int ix = to_sensor_dev_attr_2(devattr)->index;
+ int nr = to_sensor_dev_attr_2(devattr)->nr;
+ struct amc6821_data *data = amc6821_update_device(dev);
+ switch (nr) {
+ case 1:
+ return sprintf(buf, "%d\n",
+ data->temp1_auto_point_temp[ix] * 1000);
+ break;
+ case 2:
+ return sprintf(buf, "%d\n",
+ data->temp2_auto_point_temp[ix] * 1000);
+ break;
+ default:
+ dev_dbg(dev, "Unknown attr->nr (%d).\n", nr);
+ return -EINVAL;
+ }
}
-get_auto_point(temp1_auto_point_temp);
-get_auto_point(temp2_auto_point_temp);
static ssize_t get_pwm1_auto_point_pwm(
struct device *dev,
struct device_attribute *devattr,
char *buf)
{
- int nr = to_sensor_dev_attr(devattr)->index;
+ int ix = to_sensor_dev_attr(devattr)->index;
struct amc6821_data *data = amc6821_update_device(dev);
- return sprintf(buf, "%d\n", data->pwm1_auto_point_pwm[nr]);
+ return sprintf(buf, "%d\n", data->pwm1_auto_point_pwm[ix]);
+}
+
+
+static inline ssize_t set_slope_register(struct i2c_client *client,
+ u8 reg,
+ u8 dpwm,
+ u8 *ptemp)
+{
+ int dt;
+ u8 tmp;
+
+ dt = ptemp[2]-ptemp[1];
+ for (tmp = 4; tmp > 0; tmp--) {
+ if (dt * (0x20 >> tmp) >= dpwm)
+ break;
+ }
+ tmp |= (ptemp[1] & 0x7C) << 1;
+ if (i2c_smbus_write_byte_data(client,
+ reg, tmp)) {
+ dev_err(&client->dev, "Register write error, aborting.\n");
+ return -EIO;
+ }
+ return 0;
}
-#define set_temp_auto_point_temp(name, reg)\
-static ssize_t set_##name(\
- struct device *dev,\
- struct device_attribute *attr,\
- const char *buf,\
- size_t count)\
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct amc6821_data *data = amc6821_update_device(dev);\
- int nr = to_sensor_dev_attr(attr)->index;\
- int val = simple_strtol(buf, NULL, 10); \
- u8 tmp;\
- int dt;\
- int dpwm;\
- \
- mutex_lock(&data->update_lock); \
- switch (nr) {\
- case 0:\
- data->name[0] = SENSORS_LIMIT(val / 1000, 0,\
- data->temp1_auto_point_temp[1]);\
- data->name[0] = SENSORS_LIMIT(data->name[0], 0,\
- data->temp2_auto_point_temp[1]);\
- data->name[0] = SENSORS_LIMIT(data->name[0], 0, 63); \
- data->valid = 0;\
- if (i2c_smbus_write_byte_data(\
- client,\
- AMC6821_REG_PSV_TEMP,\
- data->name[0])) {\
- dev_err(&client->dev,\
- "Register write error, aborting.\n");\
- count = -EIO;\
- } \
- goto EXIT;\
- break;\
- case 1:\
- data->name[1] = SENSORS_LIMIT(\
- val / 1000,\
- (data->name[0] & 0x7C) + 4,\
- 124);\
- data->name[1] &= 0x7C;\
- data->name[2] = SENSORS_LIMIT(\
- data->name[2], data->name[1] + 1,\
- 255);\
- break;\
- case 2:\
- data->name[2] = SENSORS_LIMIT(\
- val / 1000,\
- data->name[1]+1,\
- 255); \
- break;\
- } \
- dt = data->name[2]-data->name[1];\
- dpwm = data->pwm1_auto_point_pwm[2] - data->pwm1_auto_point_pwm[1];\
- for (tmp = 4; tmp > 0; tmp--) {\
- if (dt * (0x20 >> tmp) >= dpwm)\
- break;\
- } \
- tmp |= (data->name[1] & 0x7C) << 1;\
- if (i2c_smbus_write_byte_data(client, reg, tmp)) {\
- dev_err(&client->dev, "Register write error, aborting.\n");\
- count = -EIO;\
- } \
- data->valid = 0;\
-EXIT:\
- mutex_unlock(&data->update_lock); \
- return count; \
+
+static ssize_t set_temp_auto_point_temp(
+ struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct amc6821_data *data = amc6821_update_device(dev);
+ int ix = to_sensor_dev_attr_2(attr)->index;
+ int nr = to_sensor_dev_attr_2(attr)->nr;
+ u8 *ptemp;
+ u8 reg;
+ int dpwm;
+ long val;
+ int ret = strict_strtol(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ switch (nr) {
+ case 1:
+ ptemp = data->temp1_auto_point_temp;
+ reg = AMC6821_REG_LTEMP_FAN_CTRL;
+ break;
+ case 2:
+ ptemp = data->temp2_auto_point_temp;
+ reg = AMC6821_REG_RTEMP_FAN_CTRL;
+ break;
+ default:
+ dev_dbg(dev, "Unknown attr->nr (%d).\n", nr);
+ return -EINVAL;
+ }
+
+ data->valid = 0;
+ mutex_lock(&data->update_lock);
+ switch (ix) {
+ case 0:
+ ptemp[0] = SENSORS_LIMIT(val / 1000, 0,
+ data->temp1_auto_point_temp[1]);
+ ptemp[0] = SENSORS_LIMIT(ptemp[0], 0,
+ data->temp2_auto_point_temp[1]);
+ ptemp[0] = SENSORS_LIMIT(ptemp[0], 0, 63);
+ if (i2c_smbus_write_byte_data(
+ client,
+ AMC6821_REG_PSV_TEMP,
+ ptemp[0])) {
+ dev_err(&client->dev,
+ "Register write error, aborting.\n");
+ count = -EIO;
+ }
+ goto EXIT;
+ break;
+ case 1:
+ ptemp[1] = SENSORS_LIMIT(
+ val / 1000,
+ (ptemp[0] & 0x7C) + 4,
+ 124);
+ ptemp[1] &= 0x7C;
+ ptemp[2] = SENSORS_LIMIT(
+ ptemp[2], ptemp[1] + 1,
+ 255);
+ break;
+ case 2:
+ ptemp[2] = SENSORS_LIMIT(
+ val / 1000,
+ ptemp[1]+1,
+ 255);
+ break;
+ default:
+ dev_dbg(dev, "Unknown attr->index (%d).\n", ix);
+ count = -EINVAL;
+ goto EXIT;
+ }
+ dpwm = data->pwm1_auto_point_pwm[2] - data->pwm1_auto_point_pwm[1];
+ if (set_slope_register(client, reg, dpwm, ptemp))
+ count = -EIO;
+
+EXIT:
+ mutex_unlock(&data->update_lock);
+ return count;
}
-set_temp_auto_point_temp(temp1_auto_point_temp, AMC6821_REG_LTEMP_FAN_CTRL);
-set_temp_auto_point_temp(temp2_auto_point_temp, AMC6821_REG_RTEMP_FAN_CTRL);
+
static ssize_t set_pwm1_auto_point_pwm(
struct device *dev,
@@ -470,10 +552,11 @@ static ssize_t set_pwm1_auto_point_pwm(
{
struct i2c_client *client = to_i2c_client(dev);
struct amc6821_data *data = i2c_get_clientdata(client);
- int val = simple_strtol(buf, NULL, 10);
- u8 tmp;
- int dt;
int dpwm;
+ long val;
+ int ret = strict_strtol(buf, 10, &val);
+ if (ret)
+ return ret;
mutex_lock(&data->update_lock);
data->pwm1_auto_point_pwm[1] = SENSORS_LIMIT(val, 0, 254);
@@ -481,52 +564,39 @@ static ssize_t set_pwm1_auto_point_pwm(
data->pwm1_auto_point_pwm[1])) {
dev_err(&client->dev, "Register write error, aborting.\n");
count = -EIO;
+ goto EXIT;
}
-
dpwm = data->pwm1_auto_point_pwm[2] - data->pwm1_auto_point_pwm[1];
- dt = data->temp1_auto_point_temp[2]-data->temp1_auto_point_temp[1];
- for (tmp = 4; tmp > 0; tmp--) {
- if (dt * (0x20 >> tmp) >= dpwm)
- break;
- }
- tmp |= (data->temp1_auto_point_temp[1] & 0x7C) << 1;
- if (i2c_smbus_write_byte_data(client,
- AMC6821_REG_LTEMP_FAN_CTRL, tmp)) {
- dev_err(&client->dev, "Register write error, aborting.\n");
+ if (set_slope_register(client, AMC6821_REG_LTEMP_FAN_CTRL, dpwm,
+ data->temp1_auto_point_temp)) {
count = -EIO;
+ goto EXIT;
}
-
- dt = data->temp2_auto_point_temp[2]-data->temp2_auto_point_temp[1];
- for (tmp = 4; tmp > 0; tmp--) {
- if (dt * (0x20 >> tmp) >= dpwm)
- break;
- }
- tmp |= (data->temp2_auto_point_temp[1] & 0x7C) << 1;
- if (i2c_smbus_write_byte_data(client,
- AMC6821_REG_RTEMP_FAN_CTRL, tmp)) {
- dev_err(&client->dev, "Register write error, aborting.\n");
+ if (set_slope_register(client, AMC6821_REG_RTEMP_FAN_CTRL, dpwm,
+ data->temp2_auto_point_temp)) {
count = -EIO;
+ goto EXIT;
}
+
+EXIT:
data->valid = 0;
mutex_unlock(&data->update_lock);
return count;
}
-
-#define get_fan_para(name) static ssize_t get_##name(\
- struct device *dev,\
- struct device_attribute *devattr,\
- char *buf)\
-{ \
- struct amc6821_data *data = amc6821_update_device(dev); \
- if (0 == data->name)\
- return sprintf(buf, "0");\
- return sprintf(buf, "%d\n", (int)(6000000 / data->name)); \
+static ssize_t get_fan(
+ struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct amc6821_data *data = amc6821_update_device(dev);
+ int ix = to_sensor_dev_attr(devattr)->index;
+ if (0 == data->fan[ix])
+ return sprintf(buf, "0");
+ return sprintf(buf, "%d\n", (int)(6000000 / data->fan[ix]));
}
-get_fan_para(fan1_input);
-get_fan_para(fan1_min);
-get_fan_para(fan1_max);
+
static ssize_t get_fan1_fault(
struct device *dev,
@@ -541,34 +611,39 @@ static ssize_t get_fan1_fault(
}
-#define set_fan_para(name, reg) \
-static ssize_t set_##name(\
- struct device *dev,\
- struct device_attribute *attr,\
- const char *buf, size_t count)\
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct amc6821_data *data = i2c_get_clientdata(client); \
- int val = simple_strtol(buf, NULL, 10); \
- val = 1 > val ? 0xFFFF : 6000000/val; \
-\
- mutex_lock(&data->update_lock); \
- data->name = (u16) SENSORS_LIMIT(val, 1, 0xFFFF); \
- if (i2c_smbus_write_byte_data(client, reg, data->name & 0xFF)) { \
- dev_err(&client->dev, "Register write error, aborting.\n");\
- count = -EIO;\
- } \
- if (i2c_smbus_write_byte_data(client, reg+1, data->name >> 8)) { \
- dev_err(&client->dev, "Register write error, aborting.\n");\
- count = -EIO;\
- } \
- mutex_unlock(&data->update_lock); \
- return count; \
-}
+static ssize_t set_fan(
+ struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct amc6821_data *data = i2c_get_clientdata(client);
+ long val;
+ int ix = to_sensor_dev_attr(attr)->index;
+ int ret = strict_strtol(buf, 10, &val);
+ if (ret)
+ return ret;
+ val = 1 > val ? 0xFFFF : 6000000/val;
+
+ mutex_lock(&data->update_lock);
+ data->fan[ix] = (u16) SENSORS_LIMIT(val, 1, 0xFFFF);
+ if (i2c_smbus_write_byte_data(client, fan_reg_low[ix],
+ data->fan[ix] & 0xFF)) {
+ dev_err(&client->dev, "Register write error, aborting.\n");
+ count = -EIO;
+ goto EXIT;
+ }
+ if (i2c_smbus_write_byte_data(client,
+ fan_reg_hi[ix], data->fan[ix] >> 8)) {
+ dev_err(&client->dev, "Register write error, aborting.\n");
+ count = -EIO;
+ }
+EXIT:
+ mutex_unlock(&data->update_lock);
+ return count;
+}
-set_fan_para(fan1_min, AMC6821_REG_TACH_LLIMITL);
-set_fan_para(fan1_max, AMC6821_REG_TACH_HLIMITL);
static ssize_t get_fan1_div(
@@ -587,9 +662,12 @@ static ssize_t set_fan1_div(
{
struct i2c_client *client = to_i2c_client(dev);
struct amc6821_data *data = i2c_get_clientdata(client);
- int val = simple_strtol(buf, NULL, 10);
- int config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF4);
+ long val;
+ int config = strict_strtol(buf, 10, &val);
+ if (config)
+ return config;
+ config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF4);
if (config < 0) {
dev_err(&client->dev,
"Error reading configuration register, aborting.\n");
@@ -607,53 +685,56 @@ static ssize_t set_fan1_div(
break;
default:
mutex_unlock(&data->update_lock);
- return -EINVAL;
+ count = -EINVAL;
+ goto EXIT;
}
if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF4, config)) {
dev_err(&client->dev,
"Configuration register write error, aborting.\n");
count = -EIO;
}
+EXIT:
mutex_unlock(&data->update_lock);
return count;
}
-static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, get_temp1_input, NULL, 0);
-static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO | S_IWUSR, get_temp1_min,
- set_temp1_min, 0);
-static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, get_temp1_max,
- set_temp1_max, 0);
-static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO | S_IWUSR, get_temp1_crit,
- set_temp1_crit, 0);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
+ get_temp, NULL, IDX_TEMP1_INPUT);
+static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO | S_IWUSR, get_temp,
+ set_temp, IDX_TEMP1_MIN);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, get_temp,
+ set_temp, IDX_TEMP1_MAX);
+static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO | S_IWUSR, get_temp,
+ set_temp, IDX_TEMP1_CRIT);
static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO,
- get_temp1_min_alarm, NULL, 0);
+ get_temp_alarm, NULL, IDX_TEMP1_MIN);
static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO,
- get_temp1_max_alarm, NULL, 0);
+ get_temp_alarm, NULL, IDX_TEMP1_MAX);
static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO,
- get_temp1_crit_alarm, NULL, 0);
+ get_temp_alarm, NULL, IDX_TEMP1_CRIT);
static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO | S_IWUSR,
- get_temp2_input, NULL, 0);
-static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO | S_IWUSR, get_temp2_min,
- set_temp2_min, 0);
-static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO | S_IWUSR, get_temp2_max,
- set_temp2_max, 0);
-static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO | S_IWUSR, get_temp2_crit,
- set_temp2_crit, 0);
+ get_temp, NULL, IDX_TEMP2_INPUT);
+static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO | S_IWUSR, get_temp,
+ set_temp, IDX_TEMP2_MIN);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO | S_IWUSR, get_temp,
+ set_temp, IDX_TEMP2_MAX);
+static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO | S_IWUSR, get_temp,
+ set_temp, IDX_TEMP2_CRIT);
static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO,
get_temp2_fault, NULL, 0);
static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO,
- get_temp2_min_alarm, NULL, 0);
+ get_temp_alarm, NULL, IDX_TEMP2_MIN);
static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO,
- get_temp2_max_alarm, NULL, 0);
+ get_temp_alarm, NULL, IDX_TEMP2_MAX);
static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO,
- get_temp2_crit_alarm, NULL, 0);
-static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, get_fan1_input, NULL, 0);
+ get_temp_alarm, NULL, IDX_TEMP2_CRIT);
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, get_fan, NULL, IDX_FAN1_INPUT);
static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO | S_IWUSR,
- get_fan1_min, set_fan1_min, 0);
+ get_fan, set_fan, IDX_FAN1_MIN);
static SENSOR_DEVICE_ATTR(fan1_max, S_IRUGO | S_IWUSR,
- get_fan1_max, set_fan1_max, 0);
+ get_fan, set_fan, IDX_FAN1_MAX);
static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, get_fan1_fault, NULL, 0);
static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR,
get_fan1_div, set_fan1_div, 0);
@@ -669,19 +750,19 @@ static SENSOR_DEVICE_ATTR(pwm1_auto_point3_pwm, S_IRUGO,
get_pwm1_auto_point_pwm, NULL, 2);
static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IRUGO,
get_pwm1_auto_channels_temp, NULL, 0);
-static SENSOR_DEVICE_ATTR(temp1_auto_point1_temp, S_IRUGO,
- get_temp1_auto_point_temp, NULL, 0);
-static SENSOR_DEVICE_ATTR(temp1_auto_point2_temp, S_IWUSR | S_IRUGO,
- get_temp1_auto_point_temp, set_temp1_auto_point_temp, 1);
-static SENSOR_DEVICE_ATTR(temp1_auto_point3_temp, S_IWUSR | S_IRUGO,
- get_temp1_auto_point_temp, set_temp1_auto_point_temp, 2);
+static SENSOR_DEVICE_ATTR_2(temp1_auto_point1_temp, S_IRUGO,
+ get_temp_auto_point_temp, NULL, 1, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_auto_point2_temp, S_IWUSR | S_IRUGO,
+ get_temp_auto_point_temp, set_temp_auto_point_temp, 1, 1);
+static SENSOR_DEVICE_ATTR_2(temp1_auto_point3_temp, S_IWUSR | S_IRUGO,
+ get_temp_auto_point_temp, set_temp_auto_point_temp, 1, 2);
-static SENSOR_DEVICE_ATTR(temp2_auto_point1_temp, S_IWUSR | S_IRUGO,
- get_temp2_auto_point_temp, set_temp2_auto_point_temp, 0);
-static SENSOR_DEVICE_ATTR(temp2_auto_point2_temp, S_IWUSR | S_IRUGO,
- get_temp2_auto_point_temp, set_temp2_auto_point_temp, 1);
-static SENSOR_DEVICE_ATTR(temp2_auto_point3_temp, S_IWUSR | S_IRUGO,
- get_temp2_auto_point_temp, set_temp2_auto_point_temp, 2);
+static SENSOR_DEVICE_ATTR_2(temp2_auto_point1_temp, S_IWUSR | S_IRUGO,
+ get_temp_auto_point_temp, set_temp_auto_point_temp, 2, 0);
+static SENSOR_DEVICE_ATTR_2(temp2_auto_point2_temp, S_IWUSR | S_IRUGO,
+ get_temp_auto_point_temp, set_temp_auto_point_temp, 2, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_auto_point3_temp, S_IWUSR | S_IRUGO,
+ get_temp_auto_point_temp, set_temp_auto_point_temp, 2, 2);
@@ -736,7 +817,7 @@ static int amc6821_detect(
struct i2c_adapter *adapter = client->adapter;
int address = client->addr;
- dev_dbg(&adapter->dev, "amc6821_detect called, kind = %d\n", kind);
+ dev_dbg(&adapter->dev, "amc6821_detect called, kind = %d.\n", kind);
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
dev_dbg(&adapter->dev,
@@ -904,28 +985,16 @@ static struct amc6821_data *amc6821_update_device(struct device *dev)
struct amc6821_data *data = i2c_get_clientdata(client);
int timeout = HZ;
u8 reg;
+ int i;
mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + timeout) ||
!data->valid) {
- data->temp1_input = i2c_smbus_read_byte_data(client,
- AMC6821_REG_LTEMP_HI);
- data->temp1_min = i2c_smbus_read_byte_data(client,
- AMC6821_REG_LTEMP_LIMIT_MIN);
- data->temp1_max = i2c_smbus_read_byte_data(client,
- AMC6821_REG_LTEMP_LIMIT_MAX);
- data->temp1_crit = i2c_smbus_read_byte_data(client,
- AMC6821_REG_LTEMP_CRIT);
-
- data->temp2_input = i2c_smbus_read_byte_data(client,
- AMC6821_REG_RTEMP_HI);
- data->temp2_min = i2c_smbus_read_byte_data(client,
- AMC6821_REG_RTEMP_LIMIT_MIN);
- data->temp2_max = i2c_smbus_read_byte_data(client,
- AMC6821_REG_RTEMP_LIMIT_MAX);
- data->temp2_crit = i2c_smbus_read_byte_data(client,
- AMC6821_REG_RTEMP_CRIT);
+
+ for (i = 0; i < TEMP_IDX_LEN; i++)
+ data->temp[i] = i2c_smbus_read_byte_data(client,
+ temp_reg[i]);
data->stat1 = i2c_smbus_read_byte_data(client,
AMC6821_REG_STAT1);
@@ -934,18 +1003,14 @@ static struct amc6821_data *amc6821_update_device(struct device *dev)
data->pwm1 = i2c_smbus_read_byte_data(client,
AMC6821_REG_DCY);
- data->fan1_input = i2c_smbus_read_byte_data(client,
- AMC6821_REG_TDATA_LOW);
- data->fan1_input += i2c_smbus_read_byte_data(client,
- AMC6821_REG_TDATA_HI) << 8;
- data->fan1_min = i2c_smbus_read_byte_data(client,
- AMC6821_REG_TACH_LLIMITL);
- data->fan1_min += i2c_smbus_read_byte_data(client,
- AMC6821_REG_TACH_LLIMITL+1) << 8;
- data->fan1_max = i2c_smbus_read_byte_data(client,
- AMC6821_REG_TACH_HLIMITL);
- data->fan1_max += i2c_smbus_read_byte_data(client,
- AMC6821_REG_TACH_HLIMITL+1) << 8;
+ for (i = 0; i < FAN1_IDX_LEN; i++) {
+ data->fan[i] = i2c_smbus_read_byte_data(
+ client,
+ fan_reg_low[i]);
+ data->fan[i] += i2c_smbus_read_byte_data(
+ client,
+ fan_reg_hi[i]) << 8;
+ }
data->fan1_div = i2c_smbus_read_byte_data(client,
AMC6821_REG_CONF4);
data->fan1_div = data->fan1_div & AMC6821_CONF4_PSPR ? 4 : 2;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists