| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4AC97C00.7090503@kernel.org>
Date: Sun, 04 Oct 2009 21:54:24 -0700
From: Yinghai Lu <yinghai@...nel.org>
To: Ingo Molnar <mingo@...e.hu>,
Jesse Barnes <jbarnes@...tuousgeek.org>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
Linus Torvalds <torvalds@...ux-foundation.org>,
Thomas Gleixner <tglx@...utronix.de>,
"H. Peter Anvin" <hpa@...or.com>
Subject: [PATCH] x86/pci: intel bus root res with IOH reading -v2
for intel system with multi IOH. we could read peer root resource from PCI conf,
and don't trust _CRS again for root bus
v2: address change request from Ingo
Signed-off-by: Yinghai Lu <yinghai.lu@....com>
---
arch/x86/pci/Makefile | 1
arch/x86/pci/amd_bus.c | 45 +++++++++--------------
arch/x86/pci/bus_numa.h | 26 +++++++++++++
arch/x86/pci/intel_bus.c | 90 +++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 135 insertions(+), 27 deletions(-)
Index: linux-2.6/arch/x86/pci/Makefile
===================================================================
--- linux-2.6.orig/arch/x86/pci/Makefile
+++ linux-2.6/arch/x86/pci/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_X86_NUMAQ) += numaq_32.o
obj-y += common.o early.o
obj-y += amd_bus.o
+obj-$(CONFIG_X86_64) += intel_bus.o
Index: linux-2.6/arch/x86/pci/intel_bus.c
===================================================================
--- /dev/null
+++ linux-2.6/arch/x86/pci/intel_bus.c
@@ -0,0 +1,90 @@
+/*
+ * to read io range from IOH pci conf, need to do it after mmconfig is there
+ */
+
+#include <linux/delay.h>
+#include <linux/dmi.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <asm/pci_x86.h>
+
+#include "bus_numa.h"
+
+static inline void print_ioh_resources(struct pci_root_info *info)
+{
+ int res_num;
+ int busnum;
+ int i;
+
+ printk(KERN_DEBUG "IOH bus: [%02x, %02x]\n",
+ info->bus_min, info->bus_max);
+ res_num = info->res_num;
+ busnum = info->bus_min;
+ for (i = 0; i < res_num; i++) {
+ struct resource *res;
+
+ res = &info->res[i];
+ printk(KERN_DEBUG "IOH bus: %02x index %x %s: [%llx, %llx]\n",
+ busnum, i,
+ (res->flags & IORESOURCE_IO) ? "io port" :
+ "mmio",
+ res->start, res->end);
+ }
+}
+
+#define IOH_LIO 0x108
+#define IOH_LMMIOL 0x10c
+#define IOH_LMMIOH 0x110
+#define IOH_LMMIOH_BASEU 0x114
+#define IOH_LMMIOH_LIMITU 0x118
+#define IOH_LCFGBUS 0x11c
+
+static void __devinit pci_root_bus_res(struct pci_dev *dev)
+{
+ u16 word;
+ u32 dword;
+ struct pci_root_info *info;
+ u16 io_base, io_end;
+ u32 mmiol_base, mmiol_end;
+ u64 mmioh_base, mmioh_end;
+ int bus_base, bus_end;
+
+ if (pci_root_num >= PCI_ROOT_NR) {
+ printk(KERN_DEBUG "intel_bus.c: PCI_ROOT_NR is too small\n");
+ return;
+ }
+
+ info = &pci_root_info[pci_root_num];
+ pci_root_num++;
+
+ pci_read_config_word(dev, IOH_LCFGBUS, &word);
+ bus_base = (word & 0xff);
+ bus_end = (word & 0xff00) >> 8;
+ sprintf(info->name, "PCI Bus #%02x", bus_base);
+ info->bus_min = bus_base;
+ info->bus_max = bus_end;
+
+ pci_read_config_word(dev, IOH_LIO, &word);
+ io_base = (word & 0xf0) << (12 - 4);
+ io_end = (word & 0xf000) | 0xfff;
+ update_res(info, io_base, io_end, IORESOURCE_IO, 0);
+
+ pci_read_config_dword(dev, IOH_LMMIOL, &dword);
+ mmiol_base = (dword & 0xff00) << (24 - 8);
+ mmiol_end = (dword & 0xff000000) | 0xffffff;
+ update_res(info, mmiol_base, mmiol_end, IORESOURCE_MEM, 0);
+
+ pci_read_config_dword(dev, IOH_LMMIOH, &dword);
+ mmioh_base = ((u64)(dword & 0xfc00)) << (26 - 10);
+ mmioh_end = ((u64)(dword & 0xfc000000) | 0x3ffffff);
+ pci_read_config_dword(dev, IOH_LMMIOH_BASEU, &dword);
+ mmioh_base |= ((u64)(dword & 0x7ffff)) << 32;
+ pci_read_config_dword(dev, IOH_LMMIOH_LIMITU, &dword);
+ mmioh_end |= ((u64)(dword & 0x7ffff)) << 32;
+ update_res(info, mmioh_base, mmioh_end, IORESOURCE_MEM, 0);
+
+ print_ioh_resources(info);
+}
+
+/* intel IOH */
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, pci_root_bus_res);
Index: linux-2.6/arch/x86/pci/amd_bus.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/amd_bus.c
+++ linux-2.6/arch/x86/pci/amd_bus.c
@@ -10,6 +10,8 @@
#include <linux/cpumask.h>
#endif
+#include "bus_numa.h"
+
/*
* This discovers the pcibus <-> node mapping on AMD K8.
* also get peer root bus resource for io,mmio
@@ -17,25 +19,9 @@
#ifdef CONFIG_X86_64
-/*
- * sub bus (transparent) will use entres from 3 to store extra from root,
- * so need to make sure have enought slot there, increase PCI_BUS_NUM_RESOURCES?
- */
-#define RES_NUM 16
-struct pci_root_info {
- char name[12];
- unsigned int res_num;
- struct resource res[RES_NUM];
- int bus_min;
- int bus_max;
- int node;
- int link;
-};
-
-/* 4 at this time, it may become to 32 */
-#define PCI_ROOT_NR 4
-static int pci_root_num;
-static struct pci_root_info pci_root_info[PCI_ROOT_NR];
+int pci_root_num;
+struct pci_root_info pci_root_info[PCI_ROOT_NR];
+static int found_all_numa_early;
void x86_pci_root_bus_res_quirks(struct pci_bus *b)
{
@@ -48,8 +34,11 @@ void x86_pci_root_bus_res_quirks(struct
b->resource[1] != &iomem_resource)
return;
- /* if only one root bus, don't need to anything */
- if (pci_root_num < 2)
+ if (!pci_root_num)
+ return;
+
+ /* for amd, if only one root bus, don't need to do anything */
+ if (pci_root_num < 2 && found_all_numa_early)
return;
for (i = 0; i < pci_root_num; i++) {
@@ -130,12 +119,15 @@ static void __init update_range(struct r
}
}
-static void __init update_res(struct pci_root_info *info, size_t start,
+void __init update_res(struct pci_root_info *info, size_t start,
size_t end, unsigned long flags, int merge)
{
int i;
struct resource *res;
+ if (start > end)
+ return;
+
if (!merge)
goto addit;
@@ -230,7 +222,6 @@ static int __init early_fill_mp_bus_info
int j;
unsigned uninitialized_var(bus);
unsigned uninitialized_var(slot);
- int found;
int node;
int link;
int def_node;
@@ -247,7 +238,7 @@ static int __init early_fill_mp_bus_info
if (!early_pci_allowed())
return -1;
- found = 0;
+ found_all_numa_early = 0;
for (i = 0; i < ARRAY_SIZE(pci_probes); i++) {
u32 id;
u16 device;
@@ -261,12 +252,12 @@ static int __init early_fill_mp_bus_info
device = (id>>16) & 0xffff;
if (pci_probes[i].vendor == vendor &&
pci_probes[i].device == device) {
- found = 1;
+ found_all_numa_early = 1;
break;
}
}
- if (!found)
+ if (!found_all_numa_early)
return 0;
pci_root_num = 0;
@@ -490,7 +481,7 @@ static int __init early_fill_mp_bus_info
info = &pci_root_info[i];
res_num = info->res_num;
busnum = info->bus_min;
- printk(KERN_DEBUG "bus: [%02x,%02x] on node %x link %x\n",
+ printk(KERN_DEBUG "bus: [%02x, %02x] on node %x link %x\n",
info->bus_min, info->bus_max, info->node, info->link);
for (j = 0; j < res_num; j++) {
res = &info->res[j];
Index: linux-2.6/arch/x86/pci/bus_numa.h
===================================================================
--- /dev/null
+++ linux-2.6/arch/x86/pci/bus_numa.h
@@ -0,0 +1,26 @@
+#ifdef CONFIG_X86_64
+
+/*
+ * sub bus (transparent) will use entres from 3 to store extra from
+ * root, so need to make sure we have enought slot there, Should we
+ * increase PCI_BUS_NUM_RESOURCES?
+ */
+#define RES_NUM 16
+struct pci_root_info {
+ char name[12];
+ unsigned int res_num;
+ struct resource res[RES_NUM];
+ int bus_min;
+ int bus_max;
+ int node;
+ int link;
+};
+
+/* 4 at this time, it may become to 32 */
+#define PCI_ROOT_NR 4
+extern int pci_root_num;
+extern struct pci_root_info pci_root_info[PCI_ROOT_NR];
+
+extern void update_res(struct pci_root_info *info, size_t start,
+ size_t end, unsigned long flags, int merge);
+#endif
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists