linux-kernel - Re: [git patches] libata updates

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <200910070026.15259.bzolnier@gmail.com>
Date:	Wed, 7 Oct 2009 00:26:15 +0200
From:	Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
To:	Jeff Garzik <jeff@...zik.org>
Cc:	"Jung-Ik (John) Lee" <jilee@...gle.com>,
	Andrew Morton <akpm@...ux-foundation.org>,
	Linus Torvalds <torvalds@...ux-foundation.org>,
	linux-ide@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>,
	Grant Grundler <grundler@...gle.com>,
	Gwendal Gringo <gwendal@...gle.com>
Subject: Re: [git patches] libata updates

On Tuesday 06 October 2009 06:24:05 Jeff Garzik wrote:
> On 09/28/2009 11:34 AM, Bartlomiej Zolnierkiewicz wrote:
> > Thanks, your patch looks good to me but since there are still some
> > leftover issues left we would also need something like the incremental
> > patch below:
> >
> > From: Bartlomiej Zolnierkiewicz<bzolnier@...il.com>
> > Subject: [PATCH] pata_atp867x: PIO support fixes
> >
> > * use  8 clk setting for active clocks == 7 (was 12 clk)
> > * use 12 clk setting for active clocks>  12 (was  8 clk)
> > * do 66MHz bus fixup before mapping active clocks
> > * fix setup of PIO command timings
> >
> > Signed-off-by: Bartlomiej Zolnierkiewicz<bzolnier@...il.com>
> > ---
> >   drivers/ata/pata_atp867x.c |   36 +++++++++++++++++++-----------------
> >   1 file changed, 19 insertions(+), 17 deletions(-)
> >
> > Index: b/drivers/ata/pata_atp867x.c
> > ===================================================================
> > --- a/drivers/ata/pata_atp867x.c
> > +++ b/drivers/ata/pata_atp867x.c
> > @@ -155,30 +155,31 @@ static int atp867x_get_active_clocks_shi
> >   	struct atp867x_priv *dp = ap->private_data;
> >   	unsigned char clocks = clk;
> >
> > +	/*
> > +	 * Doc 6.6.9: increase the clock value by 1 for safer PIO speed
> > +	 * on 66MHz bus
> > +	 */
> > +	if (dp->pci66mhz)
> > +		clocks++;
> > +
> >   	switch (clocks) {
> >   	case 0:
> >   		clocks = 1;
> >   		break;
> > -	case 1 ... 7:
> > -		break;
> > -	case 9 ... 12:
> > -		clocks = 7;
> > +	case 1 ... 6:
> >   		break;
> >   	default:
> >   		printk(KERN_WARNING "ATP867X: active %dclk is invalid. "
> > -			"Using default 8clk.\n", clk);
> > +			"Using 12clk.\n", clk);
> > +	case 9 ... 12:
> > +		clocks = 7;	/* 12 clk */
> > +		break;
> > +	case 7:
> >   	case 8:	/* default 8 clk */
> >   		clocks = 0;
> >   		goto active_clock_shift_done;
> >   	}
> >
> > -	/*
> > -	 * Doc 6.6.9: increase the clock value by 1 for safer PIO speed
> > -	 * on 66MHz bus
> > -	 */
> > -	if (dp->pci66mhz&&  clocks<  7)
> > -		clocks++;
> > -
> >   active_clock_shift_done:
> >   	return clocks<<  ATP867X_IO_PIOSPD_ACTIVE_SHIFT;
> >   }
> > @@ -193,7 +194,8 @@ static int atp867x_get_recover_clocks_sh
> >   		break;
> >   	case 1 ... 11:
> >   		break;
> > -	case 13: case 14:
> > +	case 13:
> > +	case 14:
> >   		--clocks;	/* by the spec */
> >   		break;
> >   	case 15:
> > @@ -235,16 +237,16 @@ static void atp867x_set_piomode(struct a
> >   	iowrite8(b, dp->dma_mode);
> >
> >   	b = atp867x_get_active_clocks_shifted(ap, t.active) |
> > -		atp867x_get_recover_clocks_shifted(t.recover);
> > +	    atp867x_get_recover_clocks_shifted(t.recover);
> >
> >   	if (adev->devno&  1)
> >   		iowrite8(b, dp->slave_piospd);
> >   	else
> >   		iowrite8(b, dp->mstr_piospd);
> >
> > -	/*
> > -	 * use the same value for comand timing as for PIO timimg
> > -	 */
> > +	b = atp867x_get_active_clocks_shifted(ap, t.act8b) |
> > +	    atp867x_get_recover_clocks_shifted(t.rec8b);
> > +
> >   	iowrite8(b, dp->eightb_piospd);
> >   }
> >
> >
> 
> This was incremental to the previous patch, or upstream?

To the previous patch.  For your convenience I'll re-post all overdue
pata_atp867x patches to the date on linux-ide ML..
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/