Message-Id: <1255433694-26471-1-git-send-email-mad_soft@inbox.ru>
Date:	Tue, 13 Oct 2009 15:34:54 +0400
From:	Dmitry Artamonow <mad_soft@...ox.ru>
To:	David Woodhouse <dwmw2@...radead.org>
Cc:	Artem Bityutskiy <Artem.Bityutskiy@...ia.com>,
	Russell King <linux@....linux.org.uk>,
	Eric Miao <eric.y.miao@...il.com>,
	Kristoffer Ericson <kristoffer.ericson@...il.com>,
	Anton Vorontsov <cbouatmailru@...il.com>,
	linux-mtd@...ts.infradead.org,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [RESEND][PATCH] mtd: maps: remove obsolete ipaq-flash driver

This driver seems to be obsolete and broken for a long time.
It depends on CONFIG_IPAQ_HANDHELD that simply doesn't exists
anywhere in kernel. Also, it seems that none of machines it
claims to support have any use of it:
 SA11xx-based iPAQs (h3100/h3600) use sa1100-flash
 iPAQ h5000 uses physmap-flash
 Jornada 720 uses sa1100-flash
 Jornada 560 and iPAQ h1910 are not in mainline

Signed-off-by: Dmitry Artamonow <mad_soft@...ox.ru>
---
 drivers/mtd/maps/Kconfig      |    6 -
 drivers/mtd/maps/Makefile     |    1 -
 drivers/mtd/maps/ipaq-flash.c |  460 -----------------------------------------
 3 files changed, 0 insertions(+), 467 deletions(-)
 delete mode 100644 drivers/mtd/maps/ipaq-flash.c

First posted back in February to linux-mtd list here:
http://lists.infradead.org/pipermail/linux-mtd/2009-February/024664.html
and gathered no replies.

diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 841e085..8e4a655 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -361,12 +361,6 @@ config MTD_SA1100
 	  the SA1100 and SA1110, including the Assabet and the Compaq iPAQ.
 	  If you have such a board, say 'Y'.
 
-config MTD_IPAQ
-	tristate "CFI Flash device mapped on Compaq/HP iPAQ"
-	depends on IPAQ_HANDHELD && MTD_CFI
-	help
-	  This provides a driver for the on-board flash of the iPAQ.
-
 config MTD_DC21285
 	tristate "CFI Flash device mapped on DC21285 Footbridge"
 	depends on MTD_CFI && ARCH_FOOTBRIDGE && MTD_COMPLEX_MAPPINGS
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 1d5cf86..34f3cdd 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -29,7 +29,6 @@ obj-$(CONFIG_MTD_PCMCIA)	+= pcmciamtd.o
 obj-$(CONFIG_MTD_RPXLITE)	+= rpxlite.o
 obj-$(CONFIG_MTD_TQM8XXL)	+= tqm8xxl.o
 obj-$(CONFIG_MTD_SA1100)	+= sa1100-flash.o
-obj-$(CONFIG_MTD_IPAQ)		+= ipaq-flash.o
 obj-$(CONFIG_MTD_SBC_GXX)	+= sbc_gxx.o
 obj-$(CONFIG_MTD_SC520CDP)	+= sc520cdp.o
 obj-$(CONFIG_MTD_NETSC520)	+= netsc520.o
diff --git a/drivers/mtd/maps/ipaq-flash.c b/drivers/mtd/maps/ipaq-flash.c
deleted file mode 100644
index 76708e7..0000000
--- a/drivers/mtd/maps/ipaq-flash.c
+++ /dev/null
@@ -1,460 +0,0 @@
-/*
- * Flash memory access on iPAQ Handhelds (either SA1100 or PXA250 based)
- *
- * (C) 2000 Nicolas Pitre <nico@...xnic.net>
- * (C) 2002 Hewlett-Packard Company <jamey.hicks@...com>
- * (C) 2003 Christian Pellegrin <chri@...ensit.com>, <chri@...is.univ.ts.it>: concatenation of multiple flashes
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <asm/page.h>
-#include <asm/mach-types.h>
-#include <asm/system.h>
-#include <asm/errno.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#ifdef CONFIG_MTD_CONCAT
-#include <linux/mtd/concat.h>
-#endif
-
-#include <mach/hardware.h>
-#include <mach/h3600.h>
-#include <asm/io.h>
-
-
-#ifndef CONFIG_IPAQ_HANDHELD
-#error This is for iPAQ Handhelds only
-#endif
-#ifdef CONFIG_SA1100_JORNADA56X
-
-static void jornada56x_set_vpp(struct map_info *map, int vpp)
-{
-	if (vpp)
-		GPSR = GPIO_GPIO26;
-	else
-		GPCR = GPIO_GPIO26;
-	GPDR |= GPIO_GPIO26;
-}
-
-#endif
-
-#ifdef CONFIG_SA1100_JORNADA720
-
-static void jornada720_set_vpp(struct map_info *map, int vpp)
-{
-	if (vpp)
-		PPSR |= 0x80;
-	else
-		PPSR &= ~0x80;
-	PPDR |= 0x80;
-}
-
-#endif
-
-#define MAX_IPAQ_CS 2		/* Number of CS we are going to test */
-
-#define IPAQ_MAP_INIT(X) \
-	{ \
-		name:		"IPAQ flash " X, \
-	}
-
-
-static struct map_info ipaq_map[MAX_IPAQ_CS] = {
-	IPAQ_MAP_INIT("bank 1"),
-	IPAQ_MAP_INIT("bank 2")
-};
-
-static struct mtd_info *my_sub_mtd[MAX_IPAQ_CS] = {
-	NULL,
-	NULL
-};
-
-/*
- * Here are partition information for all known IPAQ-based devices.
- * See include/linux/mtd/partitions.h for definition of the mtd_partition
- * structure.
- *
- * The *_max_flash_size is the maximum possible mapped flash size which
- * is not necessarily the actual flash size.  It must be no more than
- * the value specified in the "struct map_desc *_io_desc" mapping
- * definition for the corresponding machine.
- *
- * Please keep these in alphabetical order, and formatted as per existing
- * entries.  Thanks.
- */
-
-#ifdef CONFIG_IPAQ_HANDHELD
-static unsigned long h3xxx_max_flash_size = 0x04000000;
-static struct mtd_partition h3xxx_partitions[] = {
-	{
-		name:		"H3XXX boot firmware",
-#ifndef CONFIG_LAB
-		size:		0x00040000,
-#else
-		size:		0x00080000,
-#endif
-		offset:		0,
-#ifndef CONFIG_LAB
-		mask_flags:	MTD_WRITEABLE,  /* force read-only */
-#endif
-	},
-	{
-		name:		"H3XXX root jffs2",
-#ifndef CONFIG_LAB
-		size:		0x2000000 - 2*0x40000, /* Warning, this is fixed later */
-		offset:		0x00040000,
-#else
-		size:		0x2000000 - 0x40000 - 0x80000, /* Warning, this is fixed later */
-		offset:		0x00080000,
-#endif
-	},
-	{
-		name:		"asset",
-		size:		0x40000,
-		offset:		0x2000000 - 0x40000, /* Warning, this is fixed later */
-		mask_flags:	MTD_WRITEABLE,  /* force read-only */
-	}
-};
-
-#ifndef CONFIG_MTD_CONCAT
-static struct mtd_partition h3xxx_partitions_bank2[] = {
-	/* this is used only on 2 CS machines when concat is not present */
-	{
-		name:		"second H3XXX root jffs2",
-		size:		0x1000000 - 0x40000, /* Warning, this is fixed later */
-		offset:		0x00000000,
-	},
-	{
-		name:		"second asset",
-		size:		0x40000,
-		offset:		0x1000000 - 0x40000, /* Warning, this is fixed later */
-		mask_flags:	MTD_WRITEABLE,  /* force read-only */
-	}
-};
-#endif
-
-static DEFINE_SPINLOCK(ipaq_vpp_lock);
-
-static void h3xxx_set_vpp(struct map_info *map, int vpp)
-{
-	static int nest = 0;
-
-	spin_lock(&ipaq_vpp_lock);
-	if (vpp)
-		nest++;
-	else
-		nest--;
-	if (nest)
-		assign_h3600_egpio(IPAQ_EGPIO_VPP_ON, 1);
-	else
-		assign_h3600_egpio(IPAQ_EGPIO_VPP_ON, 0);
-	spin_unlock(&ipaq_vpp_lock);
-}
-
-#endif
-
-#if defined(CONFIG_SA1100_JORNADA56X) || defined(CONFIG_SA1100_JORNADA720)
-static unsigned long jornada_max_flash_size = 0x02000000;
-static struct mtd_partition jornada_partitions[] = {
-	{
-		name:		"Jornada boot firmware",
-		size:		0x00040000,
-		offset:		0,
-		mask_flags:	MTD_WRITEABLE,  /* force read-only */
-	}, {
-		name:		"Jornada root jffs2",
-		size:		MTDPART_SIZ_FULL,
-		offset:		0x00040000,
-	}
-};
-#endif
-
-
-static struct mtd_partition *parsed_parts;
-static struct mtd_info *mymtd;
-
-static unsigned long cs_phys[] = {
-#ifdef CONFIG_ARCH_SA1100
-	SA1100_CS0_PHYS,
-	SA1100_CS1_PHYS,
-	SA1100_CS2_PHYS,
-	SA1100_CS3_PHYS,
-	SA1100_CS4_PHYS,
-	SA1100_CS5_PHYS,
-#else
-	PXA_CS0_PHYS,
-	PXA_CS1_PHYS,
-	PXA_CS2_PHYS,
-	PXA_CS3_PHYS,
-	PXA_CS4_PHYS,
-	PXA_CS5_PHYS,
-#endif
-};
-
-static const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
-
-static int __init h1900_special_case(void);
-
-static int __init ipaq_mtd_init(void)
-{
-	struct mtd_partition *parts = NULL;
-	int nb_parts = 0;
-	int parsed_nr_parts = 0;
-	const char *part_type;
-	int i; /* used when we have >1 flash chips */
-	unsigned long tot_flashsize = 0; /* used when we have >1 flash chips */
-
-	/* Default flash bankwidth */
-	// ipaq_map.bankwidth = (MSC0 & MSC_RBW) ? 2 : 4;
-
-	if (machine_is_h1900())
-	{
-		/* For our intents, the h1900 is not a real iPAQ, so we special-case it. */
-		return h1900_special_case();
-	}
-
-	if (machine_is_h3100() || machine_is_h1900())
-		for(i=0; i<MAX_IPAQ_CS; i++)
-			ipaq_map[i].bankwidth = 2;
-	else
-		for(i=0; i<MAX_IPAQ_CS; i++)
-			ipaq_map[i].bankwidth = 4;
-
-	/*
-	 * Static partition definition selection
-	 */
-	part_type = "static";
-
-	simple_map_init(&ipaq_map[0]);
-	simple_map_init(&ipaq_map[1]);
-
-#ifdef CONFIG_IPAQ_HANDHELD
-	if (machine_is_ipaq()) {
-		parts = h3xxx_partitions;
-		nb_parts = ARRAY_SIZE(h3xxx_partitions);
-		for(i=0; i<MAX_IPAQ_CS; i++) {
-			ipaq_map[i].size = h3xxx_max_flash_size;
-			ipaq_map[i].set_vpp = h3xxx_set_vpp;
-			ipaq_map[i].phys = cs_phys[i];
-			ipaq_map[i].virt = ioremap(cs_phys[i], 0x04000000);
-			if (machine_is_h3100 () || machine_is_h1900())
-				ipaq_map[i].bankwidth = 2;
-		}
-		if (machine_is_h3600()) {
-			/* No asset partition here */
-			h3xxx_partitions[1].size += 0x40000;
-			nb_parts--;
-		}
-	}
-#endif
-#ifdef CONFIG_ARCH_H5400
-	if (machine_is_h5400()) {
-		ipaq_map[0].size = 0x02000000;
-		ipaq_map[1].size = 0x02000000;
-		ipaq_map[1].phys = 0x02000000;
-		ipaq_map[1].virt = ipaq_map[0].virt + 0x02000000;
-	}
-#endif
-#ifdef CONFIG_ARCH_H1900
-	if (machine_is_h1900()) {
-		ipaq_map[0].size = 0x00400000;
-		ipaq_map[1].size = 0x02000000;
-		ipaq_map[1].phys = 0x00080000;
-		ipaq_map[1].virt = ipaq_map[0].virt + 0x00080000;
-	}
-#endif
-
-#ifdef CONFIG_SA1100_JORNADA56X
-	if (machine_is_jornada56x()) {
-		parts = jornada_partitions;
-		nb_parts = ARRAY_SIZE(jornada_partitions);
-		ipaq_map[0].size = jornada_max_flash_size;
-		ipaq_map[0].set_vpp = jornada56x_set_vpp;
-		ipaq_map[0].virt = (__u32)ioremap(0x0, 0x04000000);
-	}
-#endif
-#ifdef CONFIG_SA1100_JORNADA720
-	if (machine_is_jornada720()) {
-		parts = jornada_partitions;
-		nb_parts = ARRAY_SIZE(jornada_partitions);
-		ipaq_map[0].size = jornada_max_flash_size;
-		ipaq_map[0].set_vpp = jornada720_set_vpp;
-	}
-#endif
-
-
-	if (machine_is_ipaq()) { /* for iPAQs only */
-		for(i=0; i<MAX_IPAQ_CS; i++) {
-			printk(KERN_NOTICE "iPAQ flash: probing %d-bit flash bus, window=%lx with CFI.\n", ipaq_map[i].bankwidth*8, ipaq_map[i].virt);
-			my_sub_mtd[i] = do_map_probe("cfi_probe", &ipaq_map[i]);
-			if (!my_sub_mtd[i]) {
-				printk(KERN_NOTICE "iPAQ flash: probing %d-bit flash bus, window=%lx with JEDEC.\n", ipaq_map[i].bankwidth*8, ipaq_map[i].virt);
-				my_sub_mtd[i] = do_map_probe("jedec_probe", &ipaq_map[i]);
-			}
-			if (!my_sub_mtd[i]) {
-				printk(KERN_NOTICE "iPAQ flash: failed to find flash.\n");
-				if (i)
-					break;
-				else
-					return -ENXIO;
-			} else
-				printk(KERN_NOTICE "iPAQ flash: found %d bytes\n", my_sub_mtd[i]->size);
-
-			/* do we really need this debugging? --joshua 20030703 */
-			// printk("my_sub_mtd[%d]=%p\n", i, my_sub_mtd[i]);
-			my_sub_mtd[i]->owner = THIS_MODULE;
-			tot_flashsize += my_sub_mtd[i]->size;
-		}
-#ifdef CONFIG_MTD_CONCAT
-		/* fix the asset location */
-#	ifdef CONFIG_LAB
-		h3xxx_partitions[1].size = tot_flashsize - 0x40000 - 0x80000 /* extra big boot block */;
-#	else
-		h3xxx_partitions[1].size = tot_flashsize - 2 * 0x40000;
-#	endif
-		h3xxx_partitions[2].offset = tot_flashsize - 0x40000;
-		/* and concat the devices */
-		mymtd = mtd_concat_create(&my_sub_mtd[0], i,
-					  "ipaq");
-		if (!mymtd) {
-			printk("Cannot create iPAQ concat device\n");
-			return -ENXIO;
-		}
-#else
-		mymtd = my_sub_mtd[0];
-
-		/*
-		 *In the very near future, command line partition parsing
-		 * will use the device name as 'mtd-id' instead of a value
-		 * passed to the parse_cmdline_partitions() routine. Since
-		 * the bootldr says 'ipaq', make sure it continues to work.
-		 */
-		mymtd->name = "ipaq";
-
-		if ((machine_is_h3600())) {
-#	ifdef CONFIG_LAB
-			h3xxx_partitions[1].size = my_sub_mtd[0]->size - 0x80000;
-#	else
-			h3xxx_partitions[1].size = my_sub_mtd[0]->size - 0x40000;
-#	endif
-			nb_parts = 2;
-		} else {
-#	ifdef CONFIG_LAB
-			h3xxx_partitions[1].size = my_sub_mtd[0]->size - 0x40000 - 0x80000; /* extra big boot block */
-#	else
-			h3xxx_partitions[1].size = my_sub_mtd[0]->size - 2*0x40000;
-#	endif
-			h3xxx_partitions[2].offset = my_sub_mtd[0]->size - 0x40000;
-		}
-
-		if (my_sub_mtd[1]) {
-#	ifdef CONFIG_LAB
-			h3xxx_partitions_bank2[0].size = my_sub_mtd[1]->size - 0x80000;
-#	else
-			h3xxx_partitions_bank2[0].size = my_sub_mtd[1]->size - 0x40000;
-#	endif
-			h3xxx_partitions_bank2[1].offset = my_sub_mtd[1]->size - 0x40000;
-		}
-#endif
-	}
-	else {
-		/*
-		 * Now let's probe for the actual flash.  Do it here since
-		 * specific machine settings might have been set above.
-		 */
-		printk(KERN_NOTICE "IPAQ flash: probing %d-bit flash bus, window=%lx\n", ipaq_map[0].bankwidth*8, ipaq_map[0].virt);
-		mymtd = do_map_probe("cfi_probe", &ipaq_map[0]);
-		if (!mymtd)
-			return -ENXIO;
-		mymtd->owner = THIS_MODULE;
-	}
-
-
-	/*
-	 * Dynamic partition selection stuff (might override the static ones)
-	 */
-
-	 i = parse_mtd_partitions(mymtd, part_probes, &parsed_parts, 0);
-
-	 if (i > 0) {
-		 nb_parts = parsed_nr_parts = i;
-		 parts = parsed_parts;
-		 part_type = "dynamic";
-	 }
-
-	 if (!parts) {
-		 printk(KERN_NOTICE "IPAQ flash: no partition info available, registering whole flash at once\n");
-		 add_mtd_device(mymtd);
-#ifndef CONFIG_MTD_CONCAT
-		 if (my_sub_mtd[1])
-			 add_mtd_device(my_sub_mtd[1]);
-#endif
-	 } else {
-		 printk(KERN_NOTICE "Using %s partition definition\n", part_type);
-		 add_mtd_partitions(mymtd, parts, nb_parts);
-#ifndef CONFIG_MTD_CONCAT
-		 if (my_sub_mtd[1])
-			 add_mtd_partitions(my_sub_mtd[1], h3xxx_partitions_bank2, ARRAY_SIZE(h3xxx_partitions_bank2));
-#endif
-	 }
-
-	 return 0;
-}
-
-static void __exit ipaq_mtd_cleanup(void)
-{
-	int i;
-
-	if (mymtd) {
-		del_mtd_partitions(mymtd);
-#ifndef CONFIG_MTD_CONCAT
-		if (my_sub_mtd[1])
-			del_mtd_partitions(my_sub_mtd[1]);
-#endif
-		map_destroy(mymtd);
-#ifdef CONFIG_MTD_CONCAT
-		for(i=0; i<MAX_IPAQ_CS; i++)
-#else
-			for(i=1; i<MAX_IPAQ_CS; i++)
-#endif
-			{
-				if (my_sub_mtd[i])
-					map_destroy(my_sub_mtd[i]);
-			}
-		kfree(parsed_parts);
-	}
-}
-
-static int __init h1900_special_case(void)
-{
-	/* The iPAQ h1900 is a special case - it has weird ROM. */
-	simple_map_init(&ipaq_map[0]);
-	ipaq_map[0].size = 0x80000;
-	ipaq_map[0].set_vpp = h3xxx_set_vpp;
-	ipaq_map[0].phys = 0x0;
-	ipaq_map[0].virt = ioremap(0x0, 0x04000000);
-	ipaq_map[0].bankwidth = 2;
-
-	printk(KERN_NOTICE "iPAQ flash: probing %d-bit flash bus, window=%lx with JEDEC.\n", ipaq_map[0].bankwidth*8, ipaq_map[0].virt);
-	mymtd = do_map_probe("jedec_probe", &ipaq_map[0]);
-	if (!mymtd)
-		return -ENODEV;
-	add_mtd_device(mymtd);
-	printk(KERN_NOTICE "iPAQ flash: registered h1910 flash\n");
-
-	return 0;
-}
-
-module_init(ipaq_mtd_init);
-module_exit(ipaq_mtd_cleanup);
-
-MODULE_AUTHOR("Jamey Hicks");
-MODULE_DESCRIPTION("IPAQ CFI map driver");
-MODULE_LICENSE("MIT");
-- 
1.6.3.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists