Linux version 2.6.32-rc3-git-eric-00343-g35578ca (piel@dutifh) (gcc version 4.4.1 (GCC) ) #17 SMP PREEMPT Mon Oct 12 18:54:14 CEST 2009 Command line: BOOT_IMAGE=2632-rc3-git-eric-00343-g35578c root=UUID=01dc5fcc-55d3-4bae-932b-1119dbe7ff0b resume=UUID=0d777318-dc2d-4ec3-aa25-fbad7e0fa039 splash=silent i8042.debug i8042.reset vga=791 KERNEL supported cpus: Intel GenuineIntel BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007f7b0000 (usable) BIOS-e820: 000000007f7b0000 - 000000007f7c5400 (reserved) BIOS-e820: 000000007f7c5400 - 000000007f7e7fb8 (ACPI NVS) BIOS-e820: 000000007f7e7fb8 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) DMI 2.4 present. last_pfn = 0x7f7b0 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-D3FFF write-protect D4000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 07F800000 mask FFF800000 uncachable 2 base 0FEDA0000 mask FFFFE0000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2040MB, range: 8MB, type UC reg 2, base: 4175488KB, range: 128KB, type UC total RAM coverred: 2040M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 16M num_reg: 2 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2040MB, range: 8MB, type UC initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-000000007f7b0000 0000000000 - 007f600000 page 2M 007f600000 - 007f7b0000 page 4k kernel direct mapping tables up to 7f7b0000 @ 8000-c000 RAMDISK: 37666000 - 37fefab0 ACPI: RSDP 00000000000f7980 00024 (v02 HP ) ACPI: XSDT 000000007f7c81c4 00074 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: FACP 000000007f7c8084 000F4 (v04 HP 30C9 00000003 HP 00000001) ACPI: DSDT 000000007f7c84c0 13484 (v01 HP nc2500 00010000 MSFT 03000001) ACPI: FACS 000000007f7e7d80 00040 ACPI: SLIC 000000007f7c8238 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: HPET 000000007f7c83b0 00038 (v01 HP 30C9 00000001 HP 00000001) ACPI: APIC 000000007f7c83e8 00068 (v01 HP 30C9 00000001 HP 00000001) ACPI: MCFG 000000007f7c8450 0003C (v01 HP 30C9 00000001 HP 00000001) ACPI: TCPA 000000007f7c848c 00032 (v02 HP 30C9 00000001 HP 00000001) ACPI: SSDT 000000007f7db944 002BE (v01 HP HPQPAT 00000001 MSFT 03000001) ACPI: SSDT 000000007f7dc586 0025F (v01 HP Cpu0Tst 00003000 INTL 20060317) ACPI: SSDT 000000007f7dc7e5 000A6 (v01 HP Cpu1Tst 00003000 INTL 20060317) ACPI: SSDT 000000007f7dc88b 004D7 (v01 HP CpuPm 00003000 INTL 20060317) ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 007f7b0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 00019daa64] TEXT DATA BSS ==> [0001000000 - 00019daa64] #3 [0037666000 - 0037fefab0] RAMDISK ==> [0037666000 - 0037fefab0] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [00019db000 - 00019db18c] BRK ==> [00019db000 - 00019db18c] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007f7b0 On node 0 totalpages: 522063 DMA zone: 56 pages used for memmap DMA zone: 101 pages reserved DMA zone: 3842 pages, LIFO batch:0 DMA32 zone: 7083 pages used for memmap DMA32 zone: 510981 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000) Booting paravirtualized kernel on bare hardware NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 28 pages/cpu @ffff880001a00000 s85400 r8192 d21096 u1048576 pcpu-alloc: s85400 r8192 d21096 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 514823 Kernel command line: BOOT_IMAGE=2632-rc3-git-eric-00343-g35578c root=UUID=01dc5fcc-55d3-4bae-932b-1119dbe7ff0b resume=UUID=0d777318-dc2d-4ec3-aa25-fbad7e0fa039 splash=silent i8042.debug i8042.reset vga=791 PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Initializing CPU#0 Memory: 2035536k/2088640k available (4036k kernel code, 388k absent, 51984k reserved, 4576k data, 552k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Experimental preemptable hierarchical RCU implementation. NR_IRQS:33024 nr_irqs:424 Extended CMOS year: 2000 Console: colour dummy device 80x25 console [tty0] enabled hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 1196.971 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 2393.94 BogoMIPS (lpj=1196971) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices Initializing cgroup subsys freezer CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring handled by SMI using mwait in idle threads. Performance Events: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 ACPI: Core revision 20090903 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU U7600 @ 1.20GHz stepping 0d Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 2393.89 BogoMIPS (lpj=1196949) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 6 MCE banks CPU1: Thermal monitoring enabled (TM2) CPU1: Intel(R) Core(TM)2 Duo CPU U7600 @ 1.20GHz stepping 0d checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (4787.84 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: MCFG area at f8000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at f8000000 - fbffffff ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 ACPI: Power Resource [C29F] (on) ACPI: Power Resource [C1C7] (off) ACPI: Power Resource [C3AD] (off) ACPI: Power Resource [C3B0] (off) ACPI: Power Resource [C3C3] (off) ACPI: Power Resource [C3C4] (off) ACPI: Power Resource [C3C5] (off) ACPI: Power Resource [C3C6] (off) ACPI: Power Resource [C3C7] (off) ACPI: No dock devices found. ACPI: PCI Root Bridge [C003] (0000:00) pci 0000:00:02.0: reg 10 64bit mmio: [0xe0400000-0xe04fffff] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:00:02.0: reg 20 io port: [0x2000-0x2007] pci 0000:00:02.1: reg 10 64bit mmio: [0xe0500000-0xe05fffff] pci 0000:00:19.0: reg 10 32bit mmio: [0xe0600000-0xe061ffff] pci 0000:00:19.0: reg 14 32bit mmio: [0xe0620000-0xe0620fff] pci 0000:00:19.0: reg 18 io port: [0x2020-0x203f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0x2040-0x205f] pci 0000:00:1a.1: reg 20 io port: [0x2060-0x207f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe0621000-0xe06213ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xe0624000-0xe0627fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x2080-0x209f] pci 0000:00:1d.1: reg 20 io port: [0x20a0-0x20bf] pci 0000:00:1d.2: reg 20 io port: [0x20c0-0x20df] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe0628000-0xe06283ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007) pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0x20e0-0x20ef] pci 0000:10:00.0: reg 10 64bit mmio: [0xe0000000-0xe0003fff] pci 0000:10:00.0: supports D1 D2 pci 0000:00:1c.1: bridge 32bit mmio: [0xe0000000-0xe00fffff] pci 0000:02:06.0: reg 10 32bit mmio: [0xe0100000-0xe0100fff] pci 0000:02:06.0: supports D1 D2 pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:06.0: PME# disabled pci 0000:02:06.1: reg 10 32bit mmio: [0xe0101000-0xe01017ff] pci 0000:02:06.1: supports D1 D2 pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:06.1: PME# disabled pci 0000:02:06.2: reg 10 32bit mmio: [0xe0102000-0xe01020ff] pci 0000:02:06.2: supports D1 D2 pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:06.2: PME# disabled pci 0000:02:06.3: reg 10 32bit mmio: [0xe0103000-0xe01030ff] pci 0000:02:06.3: supports D1 D2 pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:06.3: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0xe0100000-0xe03fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11F._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C133._PRT] ACPI: PCI Interrupt Link [C12F] (IRQs *10 11) ACPI: PCI Interrupt Link [C130] (IRQs *10 11) ACPI: PCI Interrupt Link [C131] (IRQs 10 *11) ACPI: PCI Interrupt Link [C132] (IRQs 10 11) *5 ACPI: PCI Interrupt Link [C142] (IRQs *10 11) ACPI: PCI Interrupt Link [C143] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C144] (IRQs 10 *11) ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20090903/pci_link-184) SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered alloc irq_desc for 23 on node -1 alloc kstat_irqs on node -1 pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xe0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x7f7fffff could not be reserved system 00:0a: ioport range 0x500-0x55f has been reserved system 00:0a: ioport range 0x800-0x80f has been reserved system 00:0a: iomem range 0xffb00000-0xffbfffff has been reserved system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved system 00:0c: ioport range 0x4d0-0x4d1 has been reserved system 00:0c: ioport range 0x2f8-0x2ff has been reserved system 00:0c: ioport range 0x3f8-0x3ff has been reserved system 00:0c: ioport range 0x1000-0x107f has been reserved system 00:0c: ioport range 0x1100-0x113f has been reserved system 00:0c: ioport range 0x1200-0x121f has been reserved system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved system 00:0c: iomem range 0xfec00000-0xfec000ff could not be reserved system 00:0c: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:0c: iomem range 0xfed45000-0xfed8ffff has been reserved system 00:0c: iomem range 0xfed90000-0xfed99fff has been reserved system 00:0d: iomem range 0xcee00-0xcffff has been reserved system 00:0d: iomem range 0xd2000-0xd3fff has been reserved system 00:0d: iomem range 0xfeda0000-0xfedbffff has been reserved system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:10 pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: 0xe0000000-0xe00fffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03 pci 0000:02:06.0: IO window: 0x003000-0x0030ff pci 0000:02:06.0: IO window: 0x003400-0x0034ff pci 0000:02:06.0: PREFETCH window: 0x80000000-0x83ffffff pci 0000:02:06.0: MEM window: 0x84000000-0x87ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1e.0: IO window: 0x3000-0x3fff pci 0000:00:1e.0: MEM window: 0xe0100000-0xe03fffff pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x83ffffff alloc irq_desc for 16 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 17 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 alloc irq_desc for 18 on node -1 alloc kstat_irqs on node -1 pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:10: resource 1 mem: [0xe0000000-0xe00fffff] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff] pci_bus 0000:02: resource 1 mem: [0xe0100000-0xe03fffff] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x83ffffff] pci_bus 0000:02: resource 3 io: [0x00-0xffff] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:03: resource 0 io: [0x3000-0x30ff] pci_bus 0000:03: resource 1 io: [0x3400-0x34ff] pci_bus 0000:03: resource 2 pref mem [0x80000000-0x83ffffff] pci_bus 0000:03: resource 3 mem: [0x84000000-0x87ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 9766k freed audit: initializing netlink socket (disabled) type=2000 audit(1255634791.705:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 3996 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device alloc irq_desc for 24 on node -1 alloc kstat_irqs on node -1 pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 25 on node -1 alloc kstat_irqs on node -1 pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X pcieport-driver 0000:00:1c.1: setting latency timer to 64 vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004100000, using 3072k, total 7616k vesafb: mode is 1024x768x16, linelength=2048, pages=3 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 965GM Chipset agpgart-intel 0000:00:00.0: detected 7676K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: quirky BIOS, skipping spindown on poweroff and hibernation ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x20e0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x20e8 irq 15 ata2: port disabled. ignoring. PNP: PS/2 Controller [PNP0303:C29C,PNP0f13:C29D] at 0x60,0x64 irq 1,12 drivers/input/serio/i8042.c: aa -> i8042 (command) [1] drivers/input/serio/i8042.c: 55 <- i8042 (return) [1] drivers/input/serio/i8042.c: 20 -> i8042 (command) [1] drivers/input/serio/i8042.c: 30 <- i8042 (return) [1] drivers/input/serio/i8042.c: 60 -> i8042 (command) [1] drivers/input/serio/i8042.c: 30 -> i8042 (parameter) [1] drivers/input/serio/i8042.c: d3 -> i8042 (command) [1] drivers/input/serio/i8042.c: 5a -> i8042 (parameter) [1] drivers/input/serio/i8042.c: 5a <- i8042 (return) [1] drivers/input/serio/i8042.c: a7 -> i8042 (command) [1] drivers/input/serio/i8042.c: 20 -> i8042 (command) [2] drivers/input/serio/i8042.c: 30 <- i8042 (return) [2] drivers/input/serio/i8042.c: a8 -> i8042 (command) [2] drivers/input/serio/i8042.c: 20 -> i8042 (command) [2] drivers/input/serio/i8042.c: 10 <- i8042 (return) [2] drivers/input/serio/i8042.c: 60 -> i8042 (command) [2] drivers/input/serio/i8042.c: 30 -> i8042 (parameter) [2] drivers/input/serio/i8042.c: d3 -> i8042 (command) [2] drivers/input/serio/i8042.c: f0 -> i8042 (parameter) [2] drivers/input/serio/i8042.c: f0 <- i8042 (return) [2] drivers/input/serio/i8042.c: d3 -> i8042 (command) [2] drivers/input/serio/i8042.c: 56 -> i8042 (parameter) [2] drivers/input/serio/i8042.c: 56 <- i8042 (return) [2] drivers/input/serio/i8042.c: d3 -> i8042 (command) [2] drivers/input/serio/i8042.c: a4 -> i8042 (parameter) [2] drivers/input/serio/i8042.c: 11 <- i8042 (return) [3] i8042.c: Detected active multiplexing controller, rev 1.1. drivers/input/serio/i8042.c: 60 -> i8042 (command) [3] drivers/input/serio/i8042.c: 30 -> i8042 (parameter) [3] drivers/input/serio/i8042.c: 90 -> i8042 (command) [3] drivers/input/serio/i8042.c: a8 -> i8042 (command) [3] drivers/input/serio/i8042.c: 91 -> i8042 (command) [3] drivers/input/serio/i8042.c: a8 -> i8042 (command) [3] drivers/input/serio/i8042.c: 92 -> i8042 (command) [3] drivers/input/serio/i8042.c: a8 -> i8042 (command) [3] drivers/input/serio/i8042.c: 93 -> i8042 (command) [3] drivers/input/serio/i8042.c: a8 -> i8042 (command) [3] drivers/input/serio/i8042.c: 60 -> i8042 (command) [3] drivers/input/serio/i8042.c: 12 -> i8042 (parameter) [3] drivers/input/serio/i8042.c: 60 -> i8042 (command) [3] drivers/input/serio/i8042.c: 03 -> i8042 (parameter) [4] serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice Driver 'rtc_cmos' needs updating - please use bus_type methods rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered ata1.00: ATA-7: TOSHIBA MK8009GAH, BS021C, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-U10N, HP06, max MWDMA2 ata1.00: configured for UDMA/100 ata1.01: configured for MWDMA2 scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8009GA BS02 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-U10N HP06 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 sda7 > sd 0:0:0:0: [sda] Attached SCSI disk registered taskstats version 1 rtc_cmos 00:06: setting system clock to 2009-10-15 19:26:32 UTC (1255634792) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 552k freed Write protecting the kernel read-only data: 5604k input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 ACPI: Sleep Button [C2BF] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [C155] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 alloc irq_desc for 26 on node -1 alloc kstat_irqs on node -1 i915 0000:00:02.0: irq 26 for MSI/MSI-X [drm] set up 7M of stolen space [drm] TV-14: set mode NTSC 480i 0 fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver Console: switching to colour dummy device 80x25 Console: switching to colour frame buffer device 160x50 [drm] DAC-6: set mode 1920x1200 2a [drm] LVDS-8: set mode 1280x800 2b fb0: inteldrmfb frame buffer device registered panic notifier acpi device:00: registered as cooling_device0 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 ACPI: Video Device [C09A] (multi-head: yes rom: no post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 drivers/input/serio/i8042.c: f2 -> i8042 (kbd-data) [2206] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [2206] drivers/input/serio/i8042.c: ab <- i8042 (interrupt, 0, 1) [2209] drivers/input/serio/i8042.c: 83 <- i8042 (interrupt, 0, 1) [2212] drivers/input/serio/i8042.c: f4 -> i8042 (kbd-data) [2212] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [2215] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 drivers/input/serio/i8042.c: 90 -> i8042 (command) [2215] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [2215] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [2218] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 2, 12) [2219] drivers/input/serio/i8042.c: 91 -> i8042 (command) [2219] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [2219] drivers/input/serio/i8042.c: MUX error, status is 75, data is fe [2219] drivers/input/serio/i8042.c: fe <- i8042 (interrupt, 3, 12, timeout) [2219] drivers/input/serio/i8042.c: 91 -> i8042 (command) [2219] drivers/input/serio/i8042.c: ed -> i8042 (parameter) [2219] drivers/input/serio/i8042.c: MUX error, status is 75, data is fe [2220] drivers/input/serio/i8042.c: fe <- i8042 (interrupt, 3, 12, timeout) [2220] drivers/input/serio/i8042.c: 92 -> i8042 (command) [2220] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [2220] drivers/input/serio/i8042.c: MUX error, status is b5, data is fe [2221] drivers/input/serio/i8042.c: fe <- i8042 (interrupt, 4, 12, timeout) [2221] drivers/input/serio/i8042.c: 92 -> i8042 (command) [2221] drivers/input/serio/i8042.c: ed -> i8042 (parameter) [2221] drivers/input/serio/i8042.c: MUX error, status is b5, data is fe [2222] drivers/input/serio/i8042.c: fe <- i8042 (interrupt, 4, 12, timeout) [2222] drivers/input/serio/i8042.c: 93 -> i8042 (command) [2222] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [2222] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [2225] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 5, 12) [2226] usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0621000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected alloc irq_desc for 20 on node -1 alloc kstat_irqs on node -1 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe0628000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected b43-pci-bridge 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 b43-pci-bridge 0000:10:00.0: setting latency timer to 64 ssb: Sonics Silicon Backplane found on PCI device 0000:10:00.0 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00002040 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 17, io base 0x00002060 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00002080 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected alloc irq_desc for 22 on node -1 alloc kstat_irqs on node -1 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 22, io base 0x000020a0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000020c0 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. usb 2-6: new high speed USB device using ehci_hcd and address 3 usb 2-6: configuration #1 chosen from 1 choice hub 2-6:1.0: USB hub found hub 2-6:1.0: 2 ports detected usb 3-1: new full speed USB device using uhci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice usb 5-2: new full speed USB device using uhci_hcd and address 2 usb 5-2: configuration #1 chosen from 1 choice usb 2-6.1: new high speed USB device using ehci_hcd and address 4 usb 2-6.1: configuration #1 chosen from 1 choice hub 2-6.1:1.0: USB hub found hub 2-6.1:1.0: 4 ports detected usb 2-6.2: new low speed USB device using ehci_hcd and address 5 usb 2-6.2: configuration #1 chosen from 1 choice input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.2/2-6.2:1.0/input/input5 generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.7-6.2/input0 usb 2-6.1.1: new high speed USB device using ehci_hcd and address 6 usb 2-6.1.1: configuration #1 chosen from 1 choice usb 2-6.1.2: new low speed USB device using ehci_hcd and address 7 usb 2-6.1.2: configuration #1 chosen from 1 choice input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.1/2-6.1.2/2-6.1.2:1.0/input/input6 generic-usb 0003:046D:C018.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.7-6.1.2/input0 usb 2-6: USB disconnect, address 3 usb 2-6.1: USB disconnect, address 4 usb 2-6.1.1: USB disconnect, address 6 usb 2-6.1.2: USB disconnect, address 7 usb 2-6.2: USB disconnect, address 5 udev: starting version 146 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 0:0:1:0: Attached scsi generic sg1 type 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:1:0: Attached scsi CD-ROM sr0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) ACPI: AC Adapter [C23B] (on-line) ACPI: Battery Slot [C23D] (battery present) lis3lv02d: hardware type NC2510 found. lis3lv02d: 12 bits sensor found input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7 Registered led device: hp::hddprotect lis3lv02d driver loaded. cfg80211: Calling CRDA to update world regulatory domain input: PC Speaker as /devices/platform/pcspkr/input/input8 ACPI: WMI: Mapper loaded Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZ6] (25 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [TZ0] (68 C) thermal LNXTHERM:03: registered as thermal_zone2 ACPI: Thermal Zone [TZ1] (69 C) thermal LNXTHERM:04: registered as thermal_zone3 ACPI: Thermal Zone [TZ3] (54 C) thermal LNXTHERM:05: registered as thermal_zone4 ACPI: Thermal Zone [TZ4] (29 C) thermal LNXTHERM:06: registered as thermal_zone5 ACPI: Thermal Zone [TZ5] (30 C) alloc irq_desc for 19 on node -1 alloc kstat_irqs on node -1 ohci1394 0000:02:06.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 cfg80211: World regulatory domain updated: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[e0101000-e01017ff] Max Packet=[2048] IR/IT contexts=[4/4] ACPI: SSDT 000000007f7dbcca 0023D (v01 HP Cpu0Ist 00003000 INTL 20060317) ACPI: SSDT 000000007f7dbf8c 005FA (v01 HP Cpu0Cst 00003001 INTL 20060317) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Marking TSC unstable due to TSC halts in idle Switching to clocksource hpet processor LNXCPU:00: registered as cooling_device1 ACPI: SSDT 000000007f7dbc02 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317) ACPI: SSDT 000000007f7dbf07 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317) processor LNXCPU:01: registered as cooling_device2 Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb ricoh-mmc: Ricoh MMC Controller disabling driver ricoh-mmc: Copyright(c) Philip Langdale ricoh-mmc: Ricoh MMC controller found at 0000:02:06.3 [1180:0843] (rev 11) ricoh-mmc: Controller is now disabled. yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30c9] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 e1000e 0000:00:19.0: setting latency timer to 64 alloc irq_desc for 27 on node -1 alloc kstat_irqs on node -1 e1000e 0000:00:19.0: irq 27 for MSI/MSI-X drivers/input/serio/i8042.c: 90 -> i8042 (command) [34491] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [34491] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34494] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 2, 12) [34495] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34495] drivers/input/serio/i8042.c: f6 -> i8042 (parameter) [34495] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34498] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34498] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [34498] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34500] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34500] drivers/input/serio/i8042.c: 0a -> i8042 (parameter) [34500] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34503] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34503] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [34503] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34506] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34506] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [34506] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34509] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34509] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [34509] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34511] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34511] drivers/input/serio/i8042.c: 14 -> i8042 (parameter) [34512] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34514] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34514] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [34514] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34517] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34517] drivers/input/serio/i8042.c: 3c -> i8042 (parameter) [34517] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34520] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34520] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [34520] tpm_inf_pnp 00:02: Found C284 with ID IFX0102 tpm_inf_pnp 00:02: TPM found: config base 0x560, data base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34526] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34526] drivers/input/serio/i8042.c: 28 -> i8042 (parameter) [34526] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34529] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34529] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [34529] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34531] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34531] drivers/input/serio/i8042.c: 14 -> i8042 (parameter) [34532] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34534] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34534] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [34534] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34537] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34537] drivers/input/serio/i8042.c: 14 -> i8042 (parameter) [34537] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0cb8, PCI irq 18 yenta_cardbus 0000:02:06.0: Socket status: 30000006 pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06 yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe03fffff yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34540] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34540] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [34540] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34543] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34543] drivers/input/serio/i8042.c: 3c -> i8042 (parameter) [34543] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34546] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34546] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [34546] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34548] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34548] drivers/input/serio/i8042.c: 28 -> i8042 (parameter) [34549] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34551] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34551] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [34551] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34554] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34554] drivers/input/serio/i8042.c: 14 -> i8042 (parameter) [34554] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34557] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34557] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [34557] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34560] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34560] drivers/input/serio/i8042.c: 14 -> i8042 (parameter) [34560] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34562] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34569] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [34569] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34571] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 2, 12) [34572] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34572] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [34572] b43-phy0: Broadcom 4311 WLAN found (core revision 13) drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34575] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34575] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [34575] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34578] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34578] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [34578] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34581] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34581] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [34581] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34584] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34584] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [34584] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34587] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34587] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [34587] b43-phy0 debug: Found PHY: Analog 4, Type 2, Revision 9 b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2 drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34590] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34590] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [34590] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34592] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34592] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [34592] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34595] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34595] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [34595] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34598] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 2, 12) [34599] drivers/input/serio/i8042.c: 46 <- i8042 (interrupt, 2, 12) [34601] drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, 2, 12) [34603] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34603] drivers/input/serio/i8042.c: f6 -> i8042 (parameter) [34603] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34606] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34606] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [34606] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34609] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34609] drivers/input/serio/i8042.c: 03 -> i8042 (parameter) [34609] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34612] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34612] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [34612] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34614] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34615] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [34615] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34617] fan PNP0C0B:00: registered as cooling_device3 ACPI: Fan [C3B1] (off) fan PNP0C0B:01: registered as cooling_device4 ACPI: Fan [C3B2] (off) fan PNP0C0B:02: registered as cooling_device5 ACPI: Fan [C3C8] (off) drivers/input/serio/i8042.c: 90 -> i8042 (command) [34619] fan PNP0C0B:03: registered as cooling_device6 ACPI: Fan [C3C9] (off) drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [34619] fan PNP0C0B:04: registered as cooling_device7 ACPI: Fan [C3CA] (off) fan PNP0C0B:05: registered as cooling_device8 ACPI: Fan [C3CB] (off) fan PNP0C0B:06: registered as cooling_device9 ACPI: Fan [C3CC] (off) drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34622] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34622] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [34622] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34625] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 2, 12) [34625] drivers/input/serio/i8042.c: 03 <- i8042 (interrupt, 2, 12) [34627] drivers/input/serio/i8042.c: 64 <- i8042 (interrupt, 2, 12) [34630] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34630] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [34630] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34633] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34633] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [34633] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34635] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34635] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [34635] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34638] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34638] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [34638] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34641] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34641] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [34641] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34644] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34644] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [34644] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34647] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 2, 12) [34648] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 2, 12) [34649] drivers/input/serio/i8042.c: 64 <- i8042 (interrupt, 2, 12) [34652] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34652] drivers/input/serio/i8042.c: e1 -> i8042 (parameter) [34652] drivers/input/serio/i8042.c: fe <- i8042 (interrupt, 2, 12) [34655] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34655] drivers/input/serio/i8042.c: f6 -> i8042 (parameter) [34655] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34657] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34657] drivers/input/serio/i8042.c: ff -> i8042 (parameter) [34657] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34660] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1b:24:ae:b7:02 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: ffffff-0ff udev: renamed network interface eth0 to eth1 phy0: Selected rate control algorithm 'pid' Registered led device: b43-phy0::tx Registered led device: b43-phy0::rx Registered led device: b43-phy0::radio Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] drivers/input/serio/i8042.c: aa <- i8042 (interrupt, 2, 12) [34991] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 2, 12) [34993] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34993] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [34993] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34996] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34996] drivers/input/serio/i8042.c: c8 -> i8042 (parameter) [34996] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [34999] drivers/input/serio/i8042.c: 90 -> i8042 (command) [34999] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [34999] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [35002] drivers/input/serio/i8042.c: 90 -> i8042 (command) [35002] drivers/input/serio/i8042.c: 64 -> i8042 (parameter) [35002] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [35005] drivers/input/serio/i8042.c: 90 -> i8042 (command) [35005] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [35005] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [35008] drivers/input/serio/i8042.c: 90 -> i8042 (command) [35008] drivers/input/serio/i8042.c: 50 -> i8042 (parameter) [35008] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [35010] drivers/input/serio/i8042.c: 90 -> i8042 (command) [35010] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [35010] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [35013] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 2, 12) [35015] drivers/input/serio/i8042.c: 90 -> i8042 (command) [35015] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [35015] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [35017] drivers/input/serio/i8042.c: 90 -> i8042 (command) [35017] drivers/input/serio/i8042.c: c8 -> i8042 (parameter) [35017] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [35020] drivers/input/serio/i8042.c: 90 -> i8042 (command) [35020] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [35020] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [35023] drivers/input/serio/i8042.c: 90 -> i8042 (command) [35023] drivers/input/serio/i8042.c: c8 -> i8042 (parameter) [35023] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [35026] drivers/input/serio/i8042.c: 90 -> i8042 (command) [35026] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [35026] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [35029] drivers/input/serio/i8042.c: 90 -> i8042 (command) [35029] drivers/input/serio/i8042.c: 50 -> i8042 (parameter) [35029] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [35031] drivers/input/serio/i8042.c: 90 -> i8042 (command) [35031] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [35031] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [35034] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 2, 12) [35035] drivers/input/serio/i8042.c: 90 -> i8042 (command) [35035] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [35035] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [35038] drivers/input/serio/i8042.c: 90 -> i8042 (command) [35038] drivers/input/serio/i8042.c: c8 -> i8042 (parameter) [35038] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [35041] drivers/input/serio/i8042.c: 90 -> i8042 (command) [35041] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [35041] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [35044] drivers/input/serio/i8042.c: 90 -> i8042 (command) [35044] drivers/input/serio/i8042.c: 64 -> i8042 (parameter) [35044] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [35047] drivers/input/serio/i8042.c: 90 -> i8042 (command) [35047] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [35047] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [35050] drivers/input/serio/i8042.c: 90 -> i8042 (command) [35050] drivers/input/serio/i8042.c: 50 -> i8042 (parameter) [35050] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [35053] drivers/input/serio/i8042.c: 90 -> i8042 (command) [35053] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [35053] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [35055] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 2, 12) [35057] drivers/input/serio/i8042.c: 90 -> i8042 (command) [35057] drivers/input/serio/i8042.c: ff -> i8042 (parameter) [35057] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [35060] sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman ieee1394: Host added: ID:BUS[0-00:1023] GUID[001b249929bd0f10] drivers/input/serio/i8042.c: aa <- i8042 (interrupt, 2, 12) [35393] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 2, 12) [35395] drivers/input/serio/i8042.c: 90 -> i8042 (command) [35395] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [35395] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [35398] drivers/input/serio/i8042.c: 90 -> i8042 (command) [35398] drivers/input/serio/i8042.c: 64 -> i8042 (parameter) [35398] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [35400] drivers/input/serio/i8042.c: 90 -> i8042 (command) [35400] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [35400] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [35403] drivers/input/serio/i8042.c: 90 -> i8042 (command) [35403] drivers/input/serio/i8042.c: 03 -> i8042 (parameter) [35403] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [35406] drivers/input/serio/i8042.c: 90 -> i8042 (command) [35406] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [35406] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [35409] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input9 drivers/input/serio/i8042.c: 90 -> i8042 (command) [35409] drivers/input/serio/i8042.c: f4 -> i8042 (parameter) [35409] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 2, 12) [35411] drivers/input/serio/i8042.c: 91 -> i8042 (command) [35412] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [35412] drivers/input/serio/i8042.c: MUX error, status is 75, data is fe [35412] drivers/input/serio/i8042.c: fe <- i8042 (interrupt, 3, 12, timeout) [35412] drivers/input/serio/i8042.c: 92 -> i8042 (command) [35412] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [35412] drivers/input/serio/i8042.c: MUX error, status is b5, data is fe [35413] drivers/input/serio/i8042.c: fe <- i8042 (interrupt, 4, 12, timeout) [35413] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35413] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [35413] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35416] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 5, 12) [35417] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35418] drivers/input/serio/i8042.c: f6 -> i8042 (parameter) [35418] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35420] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35421] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [35421] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35423] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35423] drivers/input/serio/i8042.c: 0a -> i8042 (parameter) [35423] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35427] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35427] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [35427] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35430] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35430] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [35430] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35433] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35433] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [35433] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35435] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35435] drivers/input/serio/i8042.c: 14 -> i8042 (parameter) [35435] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35439] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35439] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [35439] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35442] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35442] drivers/input/serio/i8042.c: 3c -> i8042 (parameter) [35442] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35445] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35445] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [35445] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35448] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35448] drivers/input/serio/i8042.c: 28 -> i8042 (parameter) [35448] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35450] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35451] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [35451] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35453] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35453] drivers/input/serio/i8042.c: 14 -> i8042 (parameter) [35453] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35456] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35456] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [35456] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35459] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35459] drivers/input/serio/i8042.c: 14 -> i8042 (parameter) [35459] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35462] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35462] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [35462] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35465] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35465] drivers/input/serio/i8042.c: 3c -> i8042 (parameter) [35465] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35468] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35468] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [35468] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35471] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35471] drivers/input/serio/i8042.c: 28 -> i8042 (parameter) [35471] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35474] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35474] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [35474] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35478] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35478] drivers/input/serio/i8042.c: 14 -> i8042 (parameter) [35478] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35480] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35481] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [35481] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35483] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35483] drivers/input/serio/i8042.c: 14 -> i8042 (parameter) [35483] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35486] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35486] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [35486] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35489] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 5, 12) [35491] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35491] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [35491] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35494] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35494] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [35494] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35497] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35497] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [35497] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35500] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35500] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [35500] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35503] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35503] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [35503] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35506] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35507] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [35507] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35510] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35510] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [35510] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35513] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35513] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [35513] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35516] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35516] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [35516] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35519] drivers/input/serio/i8042.c: 03 <- i8042 (interrupt, 5, 12) [35520] drivers/input/serio/i8042.c: 47 <- i8042 (interrupt, 5, 12) [35523] drivers/input/serio/i8042.c: 16 <- i8042 (interrupt, 5, 12) [35526] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35526] drivers/input/serio/i8042.c: ff -> i8042 (parameter) [35526] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35532] sdhci-pci 0000:02:06.2: SDHCI controller found [1180:0822] (rev 21) sdhci-pci 0000:02:06.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:02:06.2] using PIO HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:00:1b.0: setting latency timer to 64 input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10 drivers/input/serio/i8042.c: aa <- i8042 (interrupt, 5, 12) [35894] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 5, 12) [35897] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35897] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [35897] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35900] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35900] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [35900] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35903] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35903] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [35903] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35906] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35906] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [35906] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35909] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35909] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [35909] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35912] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35912] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [35912] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35915] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35915] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [35915] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35918] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35918] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [35918] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35921] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35921] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [35921] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35924] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35924] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [35924] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35927] drivers/input/serio/i8042.c: 03 <- i8042 (interrupt, 5, 12) [35928] drivers/input/serio/i8042.c: 47 <- i8042 (interrupt, 5, 12) [35930] drivers/input/serio/i8042.c: 16 <- i8042 (interrupt, 5, 12) [35933] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35933] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [35933] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35936] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35936] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [35936] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35939] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35939] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [35939] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35942] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35942] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [35942] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35945] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35945] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [35945] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35948] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35948] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [35948] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35951] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35951] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [35951] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35954] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35954] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [35954] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35957] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35957] drivers/input/serio/i8042.c: 03 -> i8042 (parameter) [35957] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35960] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35960] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [35960] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35963] drivers/input/serio/i8042.c: 01 <- i8042 (interrupt, 5, 12) [35964] drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, 5, 12) [35967] drivers/input/serio/i8042.c: b1 <- i8042 (interrupt, 5, 12) [35970] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35970] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [35970] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35973] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35973] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [35973] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35976] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35976] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [35976] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35979] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35979] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [35979] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35982] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35982] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [35982] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35985] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35985] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [35985] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35988] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35988] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [35988] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35991] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35991] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [35991] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35994] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35994] drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [35994] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [35997] drivers/input/serio/i8042.c: 93 -> i8042 (command) [35997] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [35997] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36000] drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, 5, 12) [36001] drivers/input/serio/i8042.c: 47 <- i8042 (interrupt, 5, 12) [36004] drivers/input/serio/i8042.c: 13 <- i8042 (interrupt, 5, 12) [36007] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36007] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [36007] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36010] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36010] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [36010] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36013] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36013] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [36013] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36016] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36016] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [36016] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36019] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36019] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [36019] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36022] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36022] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [36022] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36025] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36025] drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [36025] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36028] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36028] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [36028] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36031] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36031] drivers/input/serio/i8042.c: 01 -> i8042 (parameter) [36031] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36034] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36034] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [36034] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36037] drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, 5, 12) [36039] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 5, 12) [36042] drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, 5, 12) [36045] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36045] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [36045] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36048] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36048] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [36048] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36051] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36051] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [36051] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36054] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36054] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [36054] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36056] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36056] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [36056] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36059] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36059] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [36059] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36062] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36062] drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [36062] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36065] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36065] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [36065] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36068] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36068] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [36068] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36071] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36071] drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [36071] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36074] drivers/input/serio/i8042.c: 4a <- i8042 (interrupt, 5, 12) [36076] drivers/input/serio/i8042.c: 80 <- i8042 (interrupt, 5, 12) [36079] drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, 5, 12) [36082] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36082] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [36082] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36085] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36085] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [36085] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36088] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36088] drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [36088] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36091] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36091] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [36091] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36094] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36094] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [36094] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36096] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36096] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [36097] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36099] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36099] drivers/input/serio/i8042.c: 01 -> i8042 (parameter) [36100] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36102] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36102] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [36102] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36105] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36105] drivers/input/serio/i8042.c: 01 -> i8042 (parameter) [36105] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36108] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36108] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [36108] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36111] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36111] drivers/input/serio/i8042.c: 14 -> i8042 (parameter) [36111] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36114] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 drivers/input/serio/i8042.c: 93 -> i8042 (command) [36114] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [36114] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36117] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36117] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [36117] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36120] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36120] drivers/input/serio/i8042.c: 03 -> i8042 (parameter) [36120] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36123] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36123] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [36123] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36126] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36126] drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [36126] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36129] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36129] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [36129] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36132] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36132] drivers/input/serio/i8042.c: 01 -> i8042 (parameter) [36132] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36135] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36135] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [36135] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36138] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36138] drivers/input/serio/i8042.c: 01 -> i8042 (parameter) [36138] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36141] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36141] drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [36141] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36144] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36144] drivers/input/serio/i8042.c: 14 -> i8042 (parameter) [36144] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36147] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36147] drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [36147] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36150] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36150] drivers/input/serio/i8042.c: 03 -> i8042 (parameter) [36150] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36153] drivers/input/serio/i8042.c: 93 -> i8042 (command) [36153] drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [36153] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36156] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11 drivers/input/serio/i8042.c: 93 -> i8042 (command) [36157] drivers/input/serio/i8042.c: f4 -> i8042 (parameter) [36157] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 5, 12) [36160] input: HP WMI hotkeys as /devices/virtual/input/input12 Non-volatile memory driver v1.3 EXT3 FS on sda5, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with writeback data mode. fuse init (API version 7.13) loop: module loaded Adding 2401676k swap on /dev/sda6. Priority:-1 extents:1 across:2401676k microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3 platform microcode: firmware: requesting intel-ucode/06-0f-0d drivers/input/serio/i8042.c: ed -> i8042 (kbd-data) [43419] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [43420] drivers/input/serio/i8042.c: 02 -> i8042 (kbd-data) [43420] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [43423] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3 platform microcode: firmware: requesting intel-ucode/06-0f-0d Microcode Update Driver: v2.00 , Peter Oruba NET: Registered protocol family 10 lo: Disabled Privacy Extensions cfg80211: Calling CRDA for country: NL cfg80211: Regulatory domain changed to country: NL (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) e1000e 0000:00:19.0: irq 27 for MSI/MSI-X e1000e 0000:00:19.0: irq 27 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth1: link is not ready b43 ssb0:0: firmware: requesting b43/ucode13.fw b43 ssb0:0: firmware: requesting b43/b0g0initvals13.fw b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) b43-phy0 debug: Chip initialized b43-phy0 debug: 64-bit DMA initialized b43-phy0 debug: QoS enabled b43-phy0 debug: Wireless interface started b43-phy0 debug: Adding Interface type 2 ADDRCONF(NETDEV_UP): wlan0: link is not ready e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None 0000:00:19.0: eth1: 10/100 speed: disabling TSO ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready NET: Registered protocol family 17 wlan0: deauthenticating from 00:1b:90:76:d3:f0 by local choice (reason=3) wlan0: direct probe to AP 00:1b:90:76:d3:f0 (try 1) wlan0: direct probe responded wlan0: authenticate with AP 00:1b:90:76:d3:f0 (try 1) wlan0: authenticated wlan0: associate with AP 00:1b:90:76:d3:f0 (try 1) wlan0: RX AssocResp from 00:1b:90:76:d3:f0 (capab=0x431 status=0 aid=142) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready cfg80211: Calling CRDA for country: NL wlan0: deauthenticating from 00:1b:90:76:d3:f0 by local choice (reason=3) wlan0: deauthenticating from 00:1b:90:76:d3:f0 by local choice (reason=3) cfg80211: Current regulatory domain updated by AP to: NL (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) PPP generic driver version 2.4.2 NET: Registered protocol family 24 drivers/input/serio/i8042.c: ed -> i8042 (kbd-data) [52092] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [52093] drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [52093] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [52096] drivers/input/serio/i8042.c: ed -> i8042 (kbd-data) [52267] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [52267] drivers/input/serio/i8042.c: 02 -> i8042 (kbd-data) [52267] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [52270] eth1: no IPv6 routers present wlan0: no IPv6 routers present CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load drivers/input/serio/i8042.c: ed -> i8042 (kbd-data) [827841] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [827842] drivers/input/serio/i8042.c: 03 -> i8042 (kbd-data) [827842] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [827844] drivers/input/serio/i8042.c: ed -> i8042 (kbd-data) [3600107] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [3600107] drivers/input/serio/i8042.c: 02 -> i8042 (kbd-data) [3600107] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [3600110] drivers/input/serio/i8042.c: ed -> i8042 (kbd-data) [3660206] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [3660207] drivers/input/serio/i8042.c: 03 -> i8042 (kbd-data) [3660207] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [3660209] drivers/input/serio/i8042.c: ed -> i8042 (kbd-data) [3900629] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [3900630] drivers/input/serio/i8042.c: 02 -> i8042 (kbd-data) [3900630] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [3900633]