| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20091016102600.GA17371@havoc.gtf.org>
Date: Fri, 16 Oct 2009 06:26:00 -0400
From: Jeff Garzik <jeff@...zik.org>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-ide@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>,
David Miller <davem@...emloft.net>, Greg KH <greg@...ah.com>
Subject: [git patches] libata fixes
Note that this touches old-IDE and pci/quirks in trivial ways; vendor
patch, SB900 does not exist / will not exist as chip name.
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
drivers/ata/ahci.c | 3 ++-
drivers/ata/libata-core.c | 12 +++++++-----
drivers/ata/libata-eh.c | 6 ++++--
drivers/ata/pata_atiixp.c | 2 +-
drivers/ata/pata_sc1200.c | 3 +--
drivers/ata/pata_via.c | 2 +-
drivers/ata/sata_mv.c | 29 +++++++++++++++++++++++++++--
drivers/ata/sata_nv.c | 18 +++++++++++++++---
drivers/ide/atiixp.c | 2 +-
drivers/pci/quirks.c | 6 +++---
include/linux/pci_ids.h | 6 ++----
11 files changed, 64 insertions(+), 25 deletions(-)
Alan Cox (1):
pata_sc1200: Fix crash on boot
Gwendal Grignou (1):
sata_mv: Prevent PIO commands to be defered too long if traffic in progress.
JosephChan@....com.tw (1):
pata_via: extend the rev_max for VT6330
Shane Huang (1):
ahci / atiixp / pci quirks: rename AMD SB900 into Hudson-2
Tejun Heo (3):
sata_nv: make sure link is brough up online when skipping hardreset
libata: fix PMP initialization
libata: fix internal command failure handling
peer chen (1):
ahci: Add the AHCI controller Linux Device ID for NVIDIA chipsets.
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index b1a2577..a06f5d6 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -575,7 +575,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(ATI, 0x4395), board_ahci_sb700 }, /* ATI SB700/800 */
/* AMD */
- { PCI_VDEVICE(AMD, 0x7800), board_ahci }, /* AMD SB900 */
+ { PCI_VDEVICE(AMD, 0x7800), board_ahci }, /* AMD Hudson-2 */
/* AMD is using RAID class only for ahci controllers */
{ PCI_VENDOR_ID_AMD, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_RAID << 8, 0xffffff, board_ahci },
@@ -605,6 +605,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(NVIDIA, 0x0559), board_ahci_yesncq }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x055a), board_ahci_yesncq }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x055b), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0580), board_ahci_yesncq }, /* Linux ID */
{ PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci_yesncq }, /* MCP73 */
{ PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci_yesncq }, /* MCP73 */
{ PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci_yesncq }, /* MCP73 */
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index b525a09..d7f0f1b 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5028,12 +5028,14 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
qc->flags |= ATA_QCFLAG_FAILED;
if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) {
- if (!ata_tag_internal(qc->tag)) {
- /* always fill result TF for failed qc */
- fill_result_tf(qc);
+ /* always fill result TF for failed qc */
+ fill_result_tf(qc);
+
+ if (!ata_tag_internal(qc->tag))
ata_qc_schedule_eh(qc);
- return;
- }
+ else
+ __ata_qc_complete(qc);
+ return;
}
WARN_ON_ONCE(ap->pflags & ATA_PFLAG_FROZEN);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 0a97822..bba2ae5 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2981,12 +2981,14 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
* device detection messages backwards.
*/
ata_for_each_dev(dev, link, ALL) {
- if (!(new_mask & (1 << dev->devno)) ||
- dev->class == ATA_DEV_PMP)
+ if (!(new_mask & (1 << dev->devno)))
continue;
dev->class = ehc->classes[dev->devno];
+ if (dev->class == ATA_DEV_PMP)
+ continue;
+
ehc->i.flags |= ATA_EHI_PRINTINFO;
rc = ata_dev_configure(dev);
ehc->i.flags &= ~ATA_EHI_PRINTINFO;
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index aa4b3f6..ae4454d 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -246,7 +246,7 @@ static const struct pci_device_id atiixp[] = {
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), },
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), },
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), },
- { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_SB900_IDE), },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_IDE), },
{ },
};
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index f49814d..3bbed83 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -235,8 +235,7 @@ static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
.udma_mask = ATA_UDMA2,
.port_ops = &sc1200_port_ops
};
- /* Can't enable port 2 yet, see top comments */
- const struct ata_port_info *ppi[] = { &info, };
+ const struct ata_port_info *ppi[] = { &info, NULL };
return ata_pci_sff_init_one(dev, ppi, &sc1200_sht, NULL);
}
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 45657ca..88984b8 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -111,7 +111,7 @@ static const struct via_isa_bridge {
{ "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
{ "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES },
- { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES },
+ { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0xff, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES },
{ "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 17f9ff9..6f5093b 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1382,6 +1382,25 @@ static int mv_qc_defer(struct ata_queued_cmd *qc)
*/
if (pp->pp_flags & MV_PP_FLAG_DELAYED_EH)
return ATA_DEFER_PORT;
+
+ /* PIO commands need exclusive link: no other commands [DMA or PIO]
+ * can run concurrently.
+ * set excl_link when we want to send a PIO command in DMA mode
+ * or a non-NCQ command in NCQ mode.
+ * When we receive a command from that link, and there are no
+ * outstanding commands, mark a flag to clear excl_link and let
+ * the command go through.
+ */
+ if (unlikely(ap->excl_link)) {
+ if (link == ap->excl_link) {
+ if (ap->nr_active_links)
+ return ATA_DEFER_PORT;
+ qc->flags |= ATA_QCFLAG_CLEAR_EXCL;
+ return 0;
+ } else
+ return ATA_DEFER_PORT;
+ }
+
/*
* If the port is completely idle, then allow the new qc.
*/
@@ -1395,8 +1414,14 @@ static int mv_qc_defer(struct ata_queued_cmd *qc)
* doesn't allow it.
*/
if ((pp->pp_flags & MV_PP_FLAG_EDMA_EN) &&
- (pp->pp_flags & MV_PP_FLAG_NCQ_EN) && ata_is_ncq(qc->tf.protocol))
- return 0;
+ (pp->pp_flags & MV_PP_FLAG_NCQ_EN)) {
+ if (ata_is_ncq(qc->tf.protocol))
+ return 0;
+ else {
+ ap->excl_link = link;
+ return ATA_DEFER_PORT;
+ }
+ }
return ATA_DEFER_PORT;
}
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 86a4058..1eb4e02 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -1594,9 +1594,21 @@ static int nv_hardreset(struct ata_link *link, unsigned int *class,
!ata_dev_enabled(link->device))
sata_link_hardreset(link, sata_deb_timing_hotplug, deadline,
NULL, NULL);
- else if (!(ehc->i.flags & ATA_EHI_QUIET))
- ata_link_printk(link, KERN_INFO,
- "nv: skipping hardreset on occupied port\n");
+ else {
+ const unsigned long *timing = sata_ehc_deb_timing(ehc);
+ int rc;
+
+ if (!(ehc->i.flags & ATA_EHI_QUIET))
+ ata_link_printk(link, KERN_INFO, "nv: skipping "
+ "hardreset on occupied port\n");
+
+ /* make sure the link is online */
+ rc = sata_link_resume(link, timing, deadline);
+ /* whine about phy resume failure but proceed */
+ if (rc && rc != -EOPNOTSUPP)
+ ata_link_printk(link, KERN_WARNING, "failed to resume "
+ "link (errno=%d)\n", rc);
+ }
/* device signature acquisition is unreliable */
return -EAGAIN;
diff --git a/drivers/ide/atiixp.c b/drivers/ide/atiixp.c
index 6396c3a..837322b 100644
--- a/drivers/ide/atiixp.c
+++ b/drivers/ide/atiixp.c
@@ -177,7 +177,7 @@ static const struct pci_device_id atiixp_pci_tbl[] = {
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), 0 },
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), 1 },
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), 0 },
- { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_SB900_IDE), 0 },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_IDE), 0 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index a790b17..245d2cd 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1009,7 +1009,7 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX,
static void __devinit quirk_amd_ide_mode(struct pci_dev *pdev)
{
- /* set SBX00 SATA in IDE mode to AHCI mode */
+ /* set SBX00/Hudson-2 SATA in IDE mode to AHCI mode */
u8 tmp;
pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &tmp);
@@ -1028,8 +1028,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SB900_SATA_IDE, quirk_amd_ide_mode);
-DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SB900_SATA_IDE, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode);
/*
* Serverworks CSB5 IDE does not fully support native mode
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index f490e7a..86257a4 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -379,9 +379,6 @@
#define PCI_DEVICE_ID_ATI_IXP600_IDE 0x438c
#define PCI_DEVICE_ID_ATI_IXP700_SATA 0x4390
#define PCI_DEVICE_ID_ATI_IXP700_IDE 0x439c
-/* AMD SB Chipset */
-#define PCI_DEVICE_ID_AMD_SB900_IDE 0x780c
-#define PCI_DEVICE_ID_AMD_SB900_SATA_IDE 0x7800
#define PCI_VENDOR_ID_VLSI 0x1004
#define PCI_DEVICE_ID_VLSI_82C592 0x0005
@@ -553,9 +550,10 @@
#define PCI_DEVICE_ID_AMD_CS5536_UDC 0x2096
#define PCI_DEVICE_ID_AMD_CS5536_UOC 0x2097
#define PCI_DEVICE_ID_AMD_CS5536_IDE 0x209A
-
#define PCI_DEVICE_ID_AMD_LX_VIDEO 0x2081
#define PCI_DEVICE_ID_AMD_LX_AES 0x2082
+#define PCI_DEVICE_ID_AMD_HUDSON2_IDE 0x780c
+#define PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE 0x7800
#define PCI_VENDOR_ID_TRIDENT 0x1023
#define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX 0x2000
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists