| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1256015830-12700-4-git-send-email-linville@tuxdriver.com>
Date: Tue, 20 Oct 2009 14:17:10 +0900
From: "John W. Linville" <linville@...driver.com>
To: linux-kernel@...r.kernel.org
Cc: gregkh@...e.de, "John W. Linville" <linville@...driver.com>
Subject: [PATCH 4/4] netwave: move driver to staging
Move the netwave driver to drivers/staging. This is another pre-802.11
driver that has seen virtually no non-API-fixup activity in years, and
for which no active hardware is likely to still exist. This driver
represents unnecessary ongoing maintenance for no clear benefit.
This patch brought to you by the "hacking" session at the 2009 Kernel
Summit in Tokyo, Japan...
Signed-off-by: John W. Linville <linville@...driver.com>
---
drivers/net/wireless/Kconfig | 65 +--
drivers/net/wireless/Makefile | 3 -
drivers/net/wireless/netwave_cs.c | 1389 ----------------------------------
drivers/staging/Kconfig | 2 +
drivers/staging/Makefile | 1 +
drivers/staging/netwave/Kconfig | 10 +
drivers/staging/netwave/Makefile | 1 +
drivers/staging/netwave/netwave_cs.c | 1389 ++++++++++++++++++++++++++++++++++
8 files changed, 1420 insertions(+), 1440 deletions(-)
delete mode 100644 drivers/net/wireless/netwave_cs.c
create mode 100644 drivers/staging/netwave/Kconfig
create mode 100644 drivers/staging/netwave/Makefile
create mode 100644 drivers/staging/netwave/netwave_cs.c
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index fc1eae1..18cadf0 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -7,47 +7,17 @@ menuconfig WLAN
depends on !S390
default y
---help---
- This section contains all the pre 802.11 and 802.11 wireless
- device drivers. For a complete list of drivers and documentation
+ This section contains all the 802.11 wireless LAN device
+ drivers. For a complete list of drivers and documentation
on them refer to the wireless wiki:
http://wireless.kernel.org/en/users/Drivers
if WLAN
-menuconfig WLAN_PRE80211
- bool "Wireless LAN (pre-802.11)"
- depends on NETDEVICES
- ---help---
- Say Y if you have any pre-802.11 wireless LAN hardware.
-
- This option does not affect the kernel build, it only
- lets you choose drivers.
-
-config PCMCIA_NETWAVE
- tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
- depends on PCMCIA && WLAN_PRE80211
- select WIRELESS_EXT
- help
- Say Y here if you intend to attach this type of PCMCIA (PC-card)
- wireless Ethernet networking card to your computer.
-
- To compile this driver as a module, choose M here: the module will be
- called netwave_cs. If unsure, say N.
-
-
-menuconfig WLAN_80211
- bool "Wireless LAN (IEEE 802.11)"
- depends on NETDEVICES
- ---help---
- Say Y if you have any 802.11 wireless LAN hardware.
-
- This option does not affect the kernel build, it only
- lets you choose drivers.
-
config PCMCIA_RAYCS
tristate "Aviator/Raytheon 2.4GHz wireless support"
- depends on PCMCIA && WLAN_80211
+ depends on PCMCIA
select WIRELESS_EXT
---help---
Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
@@ -60,7 +30,6 @@ config PCMCIA_RAYCS
config LIBERTAS
tristate "Marvell 8xxx Libertas WLAN driver support"
- depends on WLAN_80211
select WIRELESS_EXT
select LIB80211
select FW_LOADER
@@ -100,7 +69,7 @@ config LIBERTAS_DEBUG
config LIBERTAS_THINFIRM
tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
- depends on WLAN_80211 && MAC80211
+ depends on MAC80211
select FW_LOADER
---help---
A library for Marvell Libertas 8xxx devices using thinfirm.
@@ -113,7 +82,7 @@ config LIBERTAS_THINFIRM_USB
config AIRO
tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
- depends on ISA_DMA_API && WLAN_80211 && (PCI || BROKEN)
+ depends on ISA_DMA_API && (PCI || BROKEN)
select WIRELESS_EXT
select CRYPTO
---help---
@@ -131,7 +100,7 @@ config AIRO
config ATMEL
tristate "Atmel at76c50x chipset 802.11b support"
- depends on (PCI || PCMCIA) && WLAN_80211
+ depends on (PCI || PCMCIA)
select WIRELESS_EXT
select FW_LOADER
select CRC32
@@ -165,7 +134,7 @@ config PCMCIA_ATMEL
config AT76C50X_USB
tristate "Atmel at76c503/at76c505/at76c505a USB cards"
- depends on MAC80211 && WLAN_80211 && USB
+ depends on MAC80211 && USB
select FW_LOADER
---help---
Enable support for USB Wireless devices using Atmel at76c503,
@@ -173,7 +142,7 @@ config AT76C50X_USB
config AIRO_CS
tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
- depends on PCMCIA && (BROKEN || !M32R) && WLAN_80211
+ depends on PCMCIA && (BROKEN || !M32R)
select WIRELESS_EXT
select CRYPTO
select CRYPTO_AES
@@ -193,7 +162,7 @@ config AIRO_CS
config PCMCIA_WL3501
tristate "Planet WL3501 PCMCIA cards"
- depends on EXPERIMENTAL && PCMCIA && WLAN_80211
+ depends on EXPERIMENTAL && PCMCIA
select WIRELESS_EXT
---help---
A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
@@ -202,7 +171,7 @@ config PCMCIA_WL3501
config PRISM54
tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'
- depends on PCI && EXPERIMENTAL && WLAN_80211
+ depends on PCI && EXPERIMENTAL
select WIRELESS_EXT
select FW_LOADER
---help---
@@ -224,7 +193,7 @@ config PRISM54
config USB_ZD1201
tristate "USB ZD1201 based Wireless device support"
- depends on USB && WLAN_80211
+ depends on USB
select WIRELESS_EXT
select FW_LOADER
---help---
@@ -242,7 +211,7 @@ config USB_ZD1201
config USB_NET_RNDIS_WLAN
tristate "Wireless RNDIS USB support"
- depends on USB && WLAN_80211 && EXPERIMENTAL
+ depends on USB && EXPERIMENTAL
depends on CFG80211
select USB_USBNET
select USB_NET_CDCETHER
@@ -270,7 +239,7 @@ config USB_NET_RNDIS_WLAN
config RTL8180
tristate "Realtek 8180/8185 PCI support"
- depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
+ depends on MAC80211 && PCI && EXPERIMENTAL
select EEPROM_93CX6
---help---
This is a driver for RTL8180 and RTL8185 based cards.
@@ -326,7 +295,7 @@ config RTL8180
config RTL8187
tristate "Realtek 8187 and 8187B USB support"
- depends on MAC80211 && USB && WLAN_80211
+ depends on MAC80211 && USB
select EEPROM_93CX6
---help---
This is a driver for RTL8187 and RTL8187B based cards.
@@ -355,7 +324,7 @@ config RTL8187_LEDS
config ADM8211
tristate "ADMtek ADM8211 support"
- depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
+ depends on MAC80211 && PCI && EXPERIMENTAL
select CRC32
select EEPROM_93CX6
---help---
@@ -382,7 +351,7 @@ config ADM8211
config MAC80211_HWSIM
tristate "Simulated radio testing tool for mac80211"
- depends on MAC80211 && WLAN_80211
+ depends on MAC80211
---help---
This driver is a developer testing tool that can be used to test
IEEE 802.11 networking stack (mac80211) functionality. This is not
@@ -395,7 +364,7 @@ config MAC80211_HWSIM
config MWL8K
tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
- depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
+ depends on MAC80211 && PCI && EXPERIMENTAL
---help---
This driver supports Marvell TOPDOG 802.11 wireless cards.
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index f4a7c8a..5d4ce4d 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -5,9 +5,6 @@
obj-$(CONFIG_IPW2100) += ipw2x00/
obj-$(CONFIG_IPW2200) += ipw2x00/
-# Obsolete cards
-obj-$(CONFIG_PCMCIA_NETWAVE) += netwave_cs.o
-
obj-$(CONFIG_HERMES) += orinoco/
obj-$(CONFIG_AIRO) += airo.o
diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c
deleted file mode 100644
index 9498b46..0000000
--- a/drivers/net/wireless/netwave_cs.c
+++ /dev/null
@@ -1,1389 +0,0 @@
-/*********************************************************************
- *
- * Filename: netwave_cs.c
- * Version: 0.4.1
- * Description: Netwave AirSurfer Wireless LAN PC Card driver
- * Status: Experimental.
- * Authors: John Markus Bjørndalen <johnm@...uit.no>
- * Dag Brattli <dagb@...uit.no>
- * David Hinds <dahinds@...rs.sourceforge.net>
- * Created at: A long time ago!
- * Modified at: Mon Nov 10 11:54:37 1997
- * Modified by: Dag Brattli <dagb@...uit.no>
- *
- * Copyright (c) 1997 University of Tromsø, Norway
- *
- * Revision History:
- *
- * 08-Nov-97 15:14:47 John Markus Bjørndalen <johnm@...uit.no>
- * - Fixed some bugs in netwave_rx and cleaned it up a bit.
- * (One of the bugs would have destroyed packets when receiving
- * multiple packets per interrupt).
- * - Cleaned up parts of newave_hw_xmit.
- * - A few general cleanups.
- * 24-Oct-97 13:17:36 Dag Brattli <dagb@...uit.no>
- * - Fixed netwave_rx receive function (got updated docs)
- * Others:
- * - Changed name from xircnw to netwave, take a look at
- * http://www.netwave-wireless.com
- * - Some reorganizing of the code
- * - Removed possible race condition between interrupt handler and transmit
- * function
- * - Started to add wireless extensions, but still needs some coding
- * - Added watchdog for better handling of transmission timeouts
- * (hopefully this works better)
- ********************************************************************/
-
-/* To have statistics (just packets sent) define this */
-#undef NETWAVE_STATS
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/errno.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/bitops.h>
-#include <linux/wireless.h>
-#include <net/iw_handler.h>
-
-#include <pcmcia/cs_types.h>
-#include <pcmcia/cs.h>
-#include <pcmcia/cistpl.h>
-#include <pcmcia/cisreg.h>
-#include <pcmcia/ds.h>
-#include <pcmcia/mem_op.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-
-#define NETWAVE_REGOFF 0x8000
-/* The Netwave IO registers, offsets to iobase */
-#define NETWAVE_REG_COR 0x0
-#define NETWAVE_REG_CCSR 0x2
-#define NETWAVE_REG_ASR 0x4
-#define NETWAVE_REG_IMR 0xa
-#define NETWAVE_REG_PMR 0xc
-#define NETWAVE_REG_IOLOW 0x6
-#define NETWAVE_REG_IOHI 0x7
-#define NETWAVE_REG_IOCONTROL 0x8
-#define NETWAVE_REG_DATA 0xf
-/* The Netwave Extended IO registers, offsets to RamBase */
-#define NETWAVE_EREG_ASCC 0x114
-#define NETWAVE_EREG_RSER 0x120
-#define NETWAVE_EREG_RSERW 0x124
-#define NETWAVE_EREG_TSER 0x130
-#define NETWAVE_EREG_TSERW 0x134
-#define NETWAVE_EREG_CB 0x100
-#define NETWAVE_EREG_SPCQ 0x154
-#define NETWAVE_EREG_SPU 0x155
-#define NETWAVE_EREG_LIF 0x14e
-#define NETWAVE_EREG_ISPLQ 0x156
-#define NETWAVE_EREG_HHC 0x158
-#define NETWAVE_EREG_NI 0x16e
-#define NETWAVE_EREG_MHS 0x16b
-#define NETWAVE_EREG_TDP 0x140
-#define NETWAVE_EREG_RDP 0x150
-#define NETWAVE_EREG_PA 0x160
-#define NETWAVE_EREG_EC 0x180
-#define NETWAVE_EREG_CRBP 0x17a
-#define NETWAVE_EREG_ARW 0x166
-
-/*
- * Commands used in the extended command buffer
- * NETWAVE_EREG_CB (0x100-0x10F)
- */
-#define NETWAVE_CMD_NOP 0x00
-#define NETWAVE_CMD_SRC 0x01
-#define NETWAVE_CMD_STC 0x02
-#define NETWAVE_CMD_AMA 0x03
-#define NETWAVE_CMD_DMA 0x04
-#define NETWAVE_CMD_SAMA 0x05
-#define NETWAVE_CMD_ER 0x06
-#define NETWAVE_CMD_DR 0x07
-#define NETWAVE_CMD_TL 0x08
-#define NETWAVE_CMD_SRP 0x09
-#define NETWAVE_CMD_SSK 0x0a
-#define NETWAVE_CMD_SMD 0x0b
-#define NETWAVE_CMD_SAPD 0x0c
-#define NETWAVE_CMD_SSS 0x11
-/* End of Command marker */
-#define NETWAVE_CMD_EOC 0x00
-
-/* ASR register bits */
-#define NETWAVE_ASR_RXRDY 0x80
-#define NETWAVE_ASR_TXBA 0x01
-
-#define TX_TIMEOUT ((32*HZ)/100)
-
-static const unsigned int imrConfRFU1 = 0x10; /* RFU interrupt mask, keep high */
-static const unsigned int imrConfIENA = 0x02; /* Interrupt enable */
-
-static const unsigned int corConfIENA = 0x01; /* Interrupt enable */
-static const unsigned int corConfLVLREQ = 0x40; /* Keep high */
-
-static const unsigned int rxConfRxEna = 0x80; /* Receive Enable */
-static const unsigned int rxConfMAC = 0x20; /* MAC host receive mode*/
-static const unsigned int rxConfPro = 0x10; /* Promiscuous */
-static const unsigned int rxConfAMP = 0x08; /* Accept Multicast Packets */
-static const unsigned int rxConfBcast = 0x04; /* Accept Broadcast Packets */
-
-static const unsigned int txConfTxEna = 0x80; /* Transmit Enable */
-static const unsigned int txConfMAC = 0x20; /* Host sends MAC mode */
-static const unsigned int txConfEUD = 0x10; /* Enable Uni-Data packets */
-static const unsigned int txConfKey = 0x02; /* Scramble data packets */
-static const unsigned int txConfLoop = 0x01; /* Loopback mode */
-
-/*
- All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
- you do not define PCMCIA_DEBUG at all, all the debug code will be
- left out. If you compile with PCMCIA_DEBUG=0, the debug code will
- be present but disabled -- but it can then be enabled for specific
- modules at load time with a 'pc_debug=#' option to insmod.
-*/
-
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version =
-"netwave_cs.c 0.3.0 Thu Jul 17 14:36:02 1997 (John Markus Bjørndalen)\n";
-#else
-#define DEBUG(n, args...)
-#endif
-
-/*====================================================================*/
-
-/* Parameters that can be set with 'insmod' */
-
-/* Choose the domain, default is 0x100 */
-static u_int domain = 0x100;
-
-/* Scramble key, range from 0x0 to 0xffff.
- * 0x0 is no scrambling.
- */
-static u_int scramble_key = 0x0;
-
-/* Shared memory speed, in ns. The documentation states that
- * the card should not be read faster than every 400ns.
- * This timing should be provided by the HBA. If it becomes a
- * problem, try setting mem_speed to 400.
- */
-static int mem_speed;
-
-module_param(domain, int, 0);
-module_param(scramble_key, int, 0);
-module_param(mem_speed, int, 0);
-
-/*====================================================================*/
-
-/* PCMCIA (Card Services) related functions */
-static void netwave_release(struct pcmcia_device *link); /* Card removal */
-static int netwave_pcmcia_config(struct pcmcia_device *arg); /* Runs after card
- insertion */
-static void netwave_detach(struct pcmcia_device *p_dev); /* Destroy instance */
-
-/* Hardware configuration */
-static void netwave_doreset(unsigned int iobase, u_char __iomem *ramBase);
-static void netwave_reset(struct net_device *dev);
-
-/* Misc device stuff */
-static int netwave_open(struct net_device *dev); /* Open the device */
-static int netwave_close(struct net_device *dev); /* Close the device */
-
-/* Packet transmission and Packet reception */
-static netdev_tx_t netwave_start_xmit( struct sk_buff *skb,
- struct net_device *dev);
-static int netwave_rx( struct net_device *dev);
-
-/* Interrupt routines */
-static irqreturn_t netwave_interrupt(int irq, void *dev_id);
-static void netwave_watchdog(struct net_device *);
-
-/* Wireless extensions */
-static struct iw_statistics* netwave_get_wireless_stats(struct net_device *dev);
-
-static void set_multicast_list(struct net_device *dev);
-
-/*
- A struct pcmcia_device structure has fields for most things that are needed
- to keep track of a socket, but there will usually be some device
- specific information that also needs to be kept track of. The
- 'priv' pointer in a struct pcmcia_device structure can be used to point to
- a device-specific private data structure, like this.
-
- A driver needs to provide a dev_node_t structure for each device
- on a card. In some cases, there is only one device per card (for
- example, ethernet cards, modems). In other cases, there may be
- many actual or logical devices (SCSI adapters, memory cards with
- multiple partitions). The dev_node_t structures need to be kept
- in a linked list starting at the 'dev' field of a struct pcmcia_device
- structure. We allocate them in the card's private data structure,
- because they generally can't be allocated dynamically.
-*/
-
-static const struct iw_handler_def netwave_handler_def;
-
-#define SIOCGIPSNAP SIOCIWFIRSTPRIV + 1 /* Site Survey Snapshot */
-
-#define MAX_ESA 10
-
-typedef struct net_addr {
- u_char addr48[6];
-} net_addr;
-
-struct site_survey {
- u_short length;
- u_char struct_revision;
- u_char roaming_state;
-
- u_char sp_existsFlag;
- u_char sp_link_quality;
- u_char sp_max_link_quality;
- u_char linkQualityGoodFairBoundary;
- u_char linkQualityFairPoorBoundary;
- u_char sp_utilization;
- u_char sp_goodness;
- u_char sp_hotheadcount;
- u_char roaming_condition;
-
- net_addr sp;
- u_char numAPs;
- net_addr nearByAccessPoints[MAX_ESA];
-};
-
-typedef struct netwave_private {
- struct pcmcia_device *p_dev;
- spinlock_t spinlock; /* Serialize access to the hardware (SMP) */
- dev_node_t node;
- u_char __iomem *ramBase;
- int timeoutCounter;
- int lastExec;
- struct timer_list watchdog; /* To avoid blocking state */
- struct site_survey nss;
- struct iw_statistics iw_stats; /* Wireless stats */
-} netwave_private;
-
-/*
- * The Netwave card is little-endian, so won't work for big endian
- * systems.
- */
-static inline unsigned short get_uint16(u_char __iomem *staddr)
-{
- return readw(staddr); /* Return only 16 bits */
-}
-
-static inline short get_int16(u_char __iomem * staddr)
-{
- return readw(staddr);
-}
-
-/*
- * Wait until the WOC (Write Operation Complete) bit in the
- * ASR (Adapter Status Register) is asserted.
- * This should have aborted if it takes too long time.
- */
-static inline void wait_WOC(unsigned int iobase)
-{
- /* Spin lock */
- while ((inb(iobase + NETWAVE_REG_ASR) & 0x8) != 0x8) ;
-}
-
-static void netwave_snapshot(netwave_private *priv, u_char __iomem *ramBase,
- unsigned int iobase) {
- u_short resultBuffer;
-
- /* if time since last snapshot is > 1 sec. (100 jiffies?) then take
- * new snapshot, else return cached data. This is the recommended rate.
- */
- if ( jiffies - priv->lastExec > 100) {
- /* Take site survey snapshot */
- /*printk( KERN_DEBUG "Taking new snapshot. %ld\n", jiffies -
- priv->lastExec); */
- wait_WOC(iobase);
- writeb(NETWAVE_CMD_SSS, ramBase + NETWAVE_EREG_CB + 0);
- writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1);
- wait_WOC(iobase);
-
- /* Get result and copy to cach */
- resultBuffer = readw(ramBase + NETWAVE_EREG_CRBP);
- copy_from_pc( &priv->nss, ramBase+resultBuffer,
- sizeof(struct site_survey));
- }
-}
-
-/*
- * Function netwave_get_wireless_stats (dev)
- *
- * Wireless extensions statistics
- *
- */
-static struct iw_statistics *netwave_get_wireless_stats(struct net_device *dev)
-{
- unsigned long flags;
- unsigned int iobase = dev->base_addr;
- netwave_private *priv = netdev_priv(dev);
- u_char __iomem *ramBase = priv->ramBase;
- struct iw_statistics* wstats;
-
- wstats = &priv->iw_stats;
-
- spin_lock_irqsave(&priv->spinlock, flags);
-
- netwave_snapshot( priv, ramBase, iobase);
-
- wstats->status = priv->nss.roaming_state;
- wstats->qual.qual = readb( ramBase + NETWAVE_EREG_SPCQ);
- wstats->qual.level = readb( ramBase + NETWAVE_EREG_ISPLQ);
- wstats->qual.noise = readb( ramBase + NETWAVE_EREG_SPU) & 0x3f;
- wstats->discard.nwid = 0L;
- wstats->discard.code = 0L;
- wstats->discard.misc = 0L;
-
- spin_unlock_irqrestore(&priv->spinlock, flags);
-
- return &priv->iw_stats;
-}
-
-static const struct net_device_ops netwave_netdev_ops = {
- .ndo_open = netwave_open,
- .ndo_stop = netwave_close,
- .ndo_start_xmit = netwave_start_xmit,
- .ndo_set_multicast_list = set_multicast_list,
- .ndo_tx_timeout = netwave_watchdog,
- .ndo_change_mtu = eth_change_mtu,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_validate_addr = eth_validate_addr,
-};
-
-/*
- * Function netwave_attach (void)
- *
- * Creates an "instance" of the driver, allocating local data
- * structures for one device. The device is registered with Card
- * Services.
- *
- * The dev_link structure is initialized, but we don't actually
- * configure the card at this point -- we wait until we receive a
- * card insertion event.
- */
-static int netwave_probe(struct pcmcia_device *link)
-{
- struct net_device *dev;
- netwave_private *priv;
-
- DEBUG(0, "netwave_attach()\n");
-
- /* Initialize the struct pcmcia_device structure */
- dev = alloc_etherdev(sizeof(netwave_private));
- if (!dev)
- return -ENOMEM;
- priv = netdev_priv(dev);
- priv->p_dev = link;
- link->priv = dev;
-
- /* The io structure describes IO port mapping */
- link->io.NumPorts1 = 16;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- /* link->io.NumPorts2 = 16;
- link->io.Attributes2 = IO_DATA_PATH_WIDTH_16; */
- link->io.IOAddrLines = 5;
-
- /* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
- link->irq.IRQInfo1 = IRQ_LEVEL_ID;
- link->irq.Handler = &netwave_interrupt;
-
- /* General socket configuration */
- link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
- link->conf.ConfigIndex = 1;
-
- /* Netwave private struct init. link/dev/node already taken care of,
- * other stuff zero'd - Jean II */
- spin_lock_init(&priv->spinlock);
-
- /* Netwave specific entries in the device structure */
- dev->netdev_ops = &netwave_netdev_ops;
- /* wireless extensions */
- dev->wireless_handlers = &netwave_handler_def;
-
- dev->watchdog_timeo = TX_TIMEOUT;
-
- link->irq.Instance = dev;
-
- return netwave_pcmcia_config( link);
-} /* netwave_attach */
-
-/*
- * Function netwave_detach (link)
- *
- * This deletes a driver "instance". The device is de-registered
- * with Card Services. If it has been released, all local data
- * structures are freed. Otherwise, the structures will be freed
- * when the device is released.
- */
-static void netwave_detach(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
-
- DEBUG(0, "netwave_detach(0x%p)\n", link);
-
- netwave_release(link);
-
- if (link->dev_node)
- unregister_netdev(dev);
-
- free_netdev(dev);
-} /* netwave_detach */
-
-/*
- * Wireless Handler : get protocol name
- */
-static int netwave_get_name(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- strcpy(wrqu->name, "Netwave");
- return 0;
-}
-
-/*
- * Wireless Handler : set Network ID
- */
-static int netwave_set_nwid(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- unsigned long flags;
- unsigned int iobase = dev->base_addr;
- netwave_private *priv = netdev_priv(dev);
- u_char __iomem *ramBase = priv->ramBase;
-
- /* Disable interrupts & save flags */
- spin_lock_irqsave(&priv->spinlock, flags);
-
- if(!wrqu->nwid.disabled) {
- domain = wrqu->nwid.value;
- printk( KERN_DEBUG "Setting domain to 0x%x%02x\n",
- (domain >> 8) & 0x01, domain & 0xff);
- wait_WOC(iobase);
- writeb(NETWAVE_CMD_SMD, ramBase + NETWAVE_EREG_CB + 0);
- writeb( domain & 0xff, ramBase + NETWAVE_EREG_CB + 1);
- writeb((domain >>8 ) & 0x01,ramBase + NETWAVE_EREG_CB+2);
- writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3);
- }
-
- /* ReEnable interrupts & restore flags */
- spin_unlock_irqrestore(&priv->spinlock, flags);
-
- return 0;
-}
-
-/*
- * Wireless Handler : get Network ID
- */
-static int netwave_get_nwid(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- wrqu->nwid.value = domain;
- wrqu->nwid.disabled = 0;
- wrqu->nwid.fixed = 1;
- return 0;
-}
-
-/*
- * Wireless Handler : set scramble key
- */
-static int netwave_set_scramble(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *key)
-{
- unsigned long flags;
- unsigned int iobase = dev->base_addr;
- netwave_private *priv = netdev_priv(dev);
- u_char __iomem *ramBase = priv->ramBase;
-
- /* Disable interrupts & save flags */
- spin_lock_irqsave(&priv->spinlock, flags);
-
- scramble_key = (key[0] << 8) | key[1];
- wait_WOC(iobase);
- writeb(NETWAVE_CMD_SSK, ramBase + NETWAVE_EREG_CB + 0);
- writeb(scramble_key & 0xff, ramBase + NETWAVE_EREG_CB + 1);
- writeb((scramble_key>>8) & 0xff, ramBase + NETWAVE_EREG_CB + 2);
- writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3);
-
- /* ReEnable interrupts & restore flags */
- spin_unlock_irqrestore(&priv->spinlock, flags);
-
- return 0;
-}
-
-/*
- * Wireless Handler : get scramble key
- */
-static int netwave_get_scramble(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *key)
-{
- key[1] = scramble_key & 0xff;
- key[0] = (scramble_key>>8) & 0xff;
- wrqu->encoding.flags = IW_ENCODE_ENABLED;
- wrqu->encoding.length = 2;
- return 0;
-}
-
-/*
- * Wireless Handler : get mode
- */
-static int netwave_get_mode(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- if(domain & 0x100)
- wrqu->mode = IW_MODE_INFRA;
- else
- wrqu->mode = IW_MODE_ADHOC;
-
- return 0;
-}
-
-/*
- * Wireless Handler : get range info
- */
-static int netwave_get_range(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- struct iw_range *range = (struct iw_range *) extra;
- int ret = 0;
-
- /* Set the length (very important for backward compatibility) */
- wrqu->data.length = sizeof(struct iw_range);
-
- /* Set all the info we don't care or don't know about to zero */
- memset(range, 0, sizeof(struct iw_range));
-
- /* Set the Wireless Extension versions */
- range->we_version_compiled = WIRELESS_EXT;
- range->we_version_source = 9; /* Nothing for us in v10 and v11 */
-
- /* Set information in the range struct */
- range->throughput = 450 * 1000; /* don't argue on this ! */
- range->min_nwid = 0x0000;
- range->max_nwid = 0x01FF;
-
- range->num_channels = range->num_frequency = 0;
-
- range->sensitivity = 0x3F;
- range->max_qual.qual = 255;
- range->max_qual.level = 255;
- range->max_qual.noise = 0;
-
- range->num_bitrates = 1;
- range->bitrate[0] = 1000000; /* 1 Mb/s */
-
- range->encoding_size[0] = 2; /* 16 bits scrambling */
- range->num_encoding_sizes = 1;
- range->max_encoding_tokens = 1; /* Only one key possible */
-
- return ret;
-}
-
-/*
- * Wireless Private Handler : get snapshot
- */
-static int netwave_get_snap(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- unsigned long flags;
- unsigned int iobase = dev->base_addr;
- netwave_private *priv = netdev_priv(dev);
- u_char __iomem *ramBase = priv->ramBase;
-
- /* Disable interrupts & save flags */
- spin_lock_irqsave(&priv->spinlock, flags);
-
- /* Take snapshot of environment */
- netwave_snapshot( priv, ramBase, iobase);
- wrqu->data.length = priv->nss.length;
- memcpy(extra, (u_char *) &priv->nss, sizeof( struct site_survey));
-
- priv->lastExec = jiffies;
-
- /* ReEnable interrupts & restore flags */
- spin_unlock_irqrestore(&priv->spinlock, flags);
-
- return(0);
-}
-
-/*
- * Structures to export the Wireless Handlers
- * This is the stuff that are treated the wireless extensions (iwconfig)
- */
-
-static const struct iw_priv_args netwave_private_args[] = {
-/*{ cmd, set_args, get_args, name } */
- { SIOCGIPSNAP, 0,
- IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | sizeof(struct site_survey),
- "getsitesurvey" },
-};
-
-static const iw_handler netwave_handler[] =
-{
- NULL, /* SIOCSIWNAME */
- netwave_get_name, /* SIOCGIWNAME */
- netwave_set_nwid, /* SIOCSIWNWID */
- netwave_get_nwid, /* SIOCGIWNWID */
- NULL, /* SIOCSIWFREQ */
- NULL, /* SIOCGIWFREQ */
- NULL, /* SIOCSIWMODE */
- netwave_get_mode, /* SIOCGIWMODE */
- NULL, /* SIOCSIWSENS */
- NULL, /* SIOCGIWSENS */
- NULL, /* SIOCSIWRANGE */
- netwave_get_range, /* SIOCGIWRANGE */
- NULL, /* SIOCSIWPRIV */
- NULL, /* SIOCGIWPRIV */
- NULL, /* SIOCSIWSTATS */
- NULL, /* SIOCGIWSTATS */
- NULL, /* SIOCSIWSPY */
- NULL, /* SIOCGIWSPY */
- NULL, /* -- hole -- */
- NULL, /* -- hole -- */
- NULL, /* SIOCSIWAP */
- NULL, /* SIOCGIWAP */
- NULL, /* -- hole -- */
- NULL, /* SIOCGIWAPLIST */
- NULL, /* -- hole -- */
- NULL, /* -- hole -- */
- NULL, /* SIOCSIWESSID */
- NULL, /* SIOCGIWESSID */
- NULL, /* SIOCSIWNICKN */
- NULL, /* SIOCGIWNICKN */
- NULL, /* -- hole -- */
- NULL, /* -- hole -- */
- NULL, /* SIOCSIWRATE */
- NULL, /* SIOCGIWRATE */
- NULL, /* SIOCSIWRTS */
- NULL, /* SIOCGIWRTS */
- NULL, /* SIOCSIWFRAG */
- NULL, /* SIOCGIWFRAG */
- NULL, /* SIOCSIWTXPOW */
- NULL, /* SIOCGIWTXPOW */
- NULL, /* SIOCSIWRETRY */
- NULL, /* SIOCGIWRETRY */
- netwave_set_scramble, /* SIOCSIWENCODE */
- netwave_get_scramble, /* SIOCGIWENCODE */
-};
-
-static const iw_handler netwave_private_handler[] =
-{
- NULL, /* SIOCIWFIRSTPRIV */
- netwave_get_snap, /* SIOCIWFIRSTPRIV + 1 */
-};
-
-static const struct iw_handler_def netwave_handler_def =
-{
- .num_standard = ARRAY_SIZE(netwave_handler),
- .num_private = ARRAY_SIZE(netwave_private_handler),
- .num_private_args = ARRAY_SIZE(netwave_private_args),
- .standard = (iw_handler *) netwave_handler,
- .private = (iw_handler *) netwave_private_handler,
- .private_args = (struct iw_priv_args *) netwave_private_args,
- .get_wireless_stats = netwave_get_wireless_stats,
-};
-
-/*
- * Function netwave_pcmcia_config (link)
- *
- * netwave_pcmcia_config() is scheduled to run after a CARD_INSERTION
- * event is received, to configure the PCMCIA socket, and to make the
- * device available to the system.
- *
- */
-
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
-static int netwave_pcmcia_config(struct pcmcia_device *link) {
- struct net_device *dev = link->priv;
- netwave_private *priv = netdev_priv(dev);
- int i, j, last_ret, last_fn;
- win_req_t req;
- memreq_t mem;
- u_char __iomem *ramBase = NULL;
-
- DEBUG(0, "netwave_pcmcia_config(0x%p)\n", link);
-
- /*
- * Try allocating IO ports. This tries a few fixed addresses.
- * If you want, you can also read the card's config table to
- * pick addresses -- see the serial driver for an example.
- */
- for (i = j = 0x0; j < 0x400; j += 0x20) {
- link->io.BasePort1 = j ^ 0x300;
- i = pcmcia_request_io(link, &link->io);
- if (i == 0)
- break;
- }
- if (i != 0) {
- cs_error(link, RequestIO, i);
- goto failed;
- }
-
- /*
- * Now allocate an interrupt line. Note that this does not
- * actually assign a handler to the interrupt.
- */
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
-
- /*
- * This actually configures the PCMCIA socket -- setting up
- * the I/O windows and the interrupt mapping.
- */
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
-
- /*
- * Allocate a 32K memory window. Note that the struct pcmcia_device
- * structure provides space for one window handle -- if your
- * device needs several windows, you'll need to keep track of
- * the handles in your private data structure, dev->priv.
- */
- DEBUG(1, "Setting mem speed of %d\n", mem_speed);
-
- req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_CM|WIN_ENABLE;
- req.Base = 0; req.Size = 0x8000;
- req.AccessSpeed = mem_speed;
- CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &link->win));
- mem.CardOffset = 0x20000; mem.Page = 0;
- CS_CHECK(MapMemPage, pcmcia_map_mem_page(link->win, &mem));
-
- /* Store base address of the common window frame */
- ramBase = ioremap(req.Base, 0x8000);
- priv->ramBase = ramBase;
-
- dev->irq = link->irq.AssignedIRQ;
- dev->base_addr = link->io.BasePort1;
- SET_NETDEV_DEV(dev, &handle_to_dev(link));
-
- if (register_netdev(dev) != 0) {
- printk(KERN_DEBUG "netwave_cs: register_netdev() failed\n");
- goto failed;
- }
-
- strcpy(priv->node.dev_name, dev->name);
- link->dev_node = &priv->node;
-
- /* Reset card before reading physical address */
- netwave_doreset(dev->base_addr, ramBase);
-
- /* Read the ethernet address and fill in the Netwave registers. */
- for (i = 0; i < 6; i++)
- dev->dev_addr[i] = readb(ramBase + NETWAVE_EREG_PA + i);
-
- printk(KERN_INFO "%s: Netwave: port %#3lx, irq %d, mem %lx, "
- "id %c%c, hw_addr %pM\n",
- dev->name, dev->base_addr, dev->irq,
- (u_long) ramBase,
- (int) readb(ramBase+NETWAVE_EREG_NI),
- (int) readb(ramBase+NETWAVE_EREG_NI+1),
- dev->dev_addr);
-
- /* get revision words */
- printk(KERN_DEBUG "Netwave_reset: revision %04x %04x\n",
- get_uint16(ramBase + NETWAVE_EREG_ARW),
- get_uint16(ramBase + NETWAVE_EREG_ARW+2));
- return 0;
-
-cs_failed:
- cs_error(link, last_fn, last_ret);
-failed:
- netwave_release(link);
- return -ENODEV;
-} /* netwave_pcmcia_config */
-
-/*
- * Function netwave_release (arg)
- *
- * After a card is removed, netwave_release() will unregister the net
- * device, and release the PCMCIA configuration. If the device is
- * still open, this will be postponed until it is closed.
- */
-static void netwave_release(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- netwave_private *priv = netdev_priv(dev);
-
- DEBUG(0, "netwave_release(0x%p)\n", link);
-
- pcmcia_disable_device(link);
- if (link->win)
- iounmap(priv->ramBase);
-}
-
-static int netwave_suspend(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
-
- if (link->open)
- netif_device_detach(dev);
-
- return 0;
-}
-
-static int netwave_resume(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
-
- if (link->open) {
- netwave_reset(dev);
- netif_device_attach(dev);
- }
-
- return 0;
-}
-
-
-/*
- * Function netwave_doreset (ioBase, ramBase)
- *
- * Proper hardware reset of the card.
- */
-static void netwave_doreset(unsigned int ioBase, u_char __iomem *ramBase)
-{
- /* Reset card */
- wait_WOC(ioBase);
- outb(0x80, ioBase + NETWAVE_REG_PMR);
- writeb(0x08, ramBase + NETWAVE_EREG_ASCC); /* Bit 3 is WOC */
- outb(0x0, ioBase + NETWAVE_REG_PMR); /* release reset */
-}
-
-/*
- * Function netwave_reset (dev)
- *
- * Reset and restore all of the netwave registers
- */
-static void netwave_reset(struct net_device *dev) {
- /* u_char state; */
- netwave_private *priv = netdev_priv(dev);
- u_char __iomem *ramBase = priv->ramBase;
- unsigned int iobase = dev->base_addr;
-
- DEBUG(0, "netwave_reset: Done with hardware reset\n");
-
- priv->timeoutCounter = 0;
-
- /* Reset card */
- netwave_doreset(iobase, ramBase);
- printk(KERN_DEBUG "netwave_reset: Done with hardware reset\n");
-
- /* Write a NOP to check the card */
- wait_WOC(iobase);
- writeb(NETWAVE_CMD_NOP, ramBase + NETWAVE_EREG_CB + 0);
- writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1);
-
- /* Set receive conf */
- wait_WOC(iobase);
- writeb(NETWAVE_CMD_SRC, ramBase + NETWAVE_EREG_CB + 0);
- writeb(rxConfRxEna + rxConfBcast, ramBase + NETWAVE_EREG_CB + 1);
- writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 2);
-
- /* Set transmit conf */
- wait_WOC(iobase);
- writeb(NETWAVE_CMD_STC, ramBase + NETWAVE_EREG_CB + 0);
- writeb(txConfTxEna, ramBase + NETWAVE_EREG_CB + 1);
- writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 2);
-
- /* Now set the MU Domain */
- printk(KERN_DEBUG "Setting domain to 0x%x%02x\n", (domain >> 8) & 0x01, domain & 0xff);
- wait_WOC(iobase);
- writeb(NETWAVE_CMD_SMD, ramBase + NETWAVE_EREG_CB + 0);
- writeb(domain & 0xff, ramBase + NETWAVE_EREG_CB + 1);
- writeb((domain>>8) & 0x01, ramBase + NETWAVE_EREG_CB + 2);
- writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3);
-
- /* Set scramble key */
- printk(KERN_DEBUG "Setting scramble key to 0x%x\n", scramble_key);
- wait_WOC(iobase);
- writeb(NETWAVE_CMD_SSK, ramBase + NETWAVE_EREG_CB + 0);
- writeb(scramble_key & 0xff, ramBase + NETWAVE_EREG_CB + 1);
- writeb((scramble_key>>8) & 0xff, ramBase + NETWAVE_EREG_CB + 2);
- writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3);
-
- /* Enable interrupts, bit 4 high to keep unused
- * source from interrupting us, bit 2 high to
- * set interrupt enable, 567 to enable TxDN,
- * RxErr and RxRdy
- */
- wait_WOC(iobase);
- outb(imrConfIENA+imrConfRFU1, iobase + NETWAVE_REG_IMR);
-
- /* Hent 4 bytes fra 0x170. Skal vaere 0a,29,88,36
- * waitWOC
- * skriv 80 til d000:3688
- * sjekk om det ble 80
- */
-
- /* Enable Receiver */
- wait_WOC(iobase);
- writeb(NETWAVE_CMD_ER, ramBase + NETWAVE_EREG_CB + 0);
- writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1);
-
- /* Set the IENA bit in COR */
- wait_WOC(iobase);
- outb(corConfIENA + corConfLVLREQ, iobase + NETWAVE_REG_COR);
-}
-
-/*
- * Function netwave_hw_xmit (data, len, dev)
- */
-static int netwave_hw_xmit(unsigned char* data, int len,
- struct net_device* dev) {
- unsigned long flags;
- unsigned int TxFreeList,
- curBuff,
- MaxData,
- DataOffset;
- int tmpcount;
-
- netwave_private *priv = netdev_priv(dev);
- u_char __iomem * ramBase = priv->ramBase;
- unsigned int iobase = dev->base_addr;
-
- /* Disable interrupts & save flags */
- spin_lock_irqsave(&priv->spinlock, flags);
-
- /* Check if there are transmit buffers available */
- wait_WOC(iobase);
- if ((inb(iobase+NETWAVE_REG_ASR) & NETWAVE_ASR_TXBA) == 0) {
- /* No buffers available */
- printk(KERN_DEBUG "netwave_hw_xmit: %s - no xmit buffers available.\n",
- dev->name);
- spin_unlock_irqrestore(&priv->spinlock, flags);
- return 1;
- }
-
- dev->stats.tx_bytes += len;
-
- DEBUG(3, "Transmitting with SPCQ %x SPU %x LIF %x ISPLQ %x\n",
- readb(ramBase + NETWAVE_EREG_SPCQ),
- readb(ramBase + NETWAVE_EREG_SPU),
- readb(ramBase + NETWAVE_EREG_LIF),
- readb(ramBase + NETWAVE_EREG_ISPLQ));
-
- /* Now try to insert it into the adapters free memory */
- wait_WOC(iobase);
- TxFreeList = get_uint16(ramBase + NETWAVE_EREG_TDP);
- MaxData = get_uint16(ramBase + NETWAVE_EREG_TDP+2);
- DataOffset = get_uint16(ramBase + NETWAVE_EREG_TDP+4);
-
- DEBUG(3, "TxFreeList %x, MaxData %x, DataOffset %x\n",
- TxFreeList, MaxData, DataOffset);
-
- /* Copy packet to the adapter fragment buffers */
- curBuff = TxFreeList;
- tmpcount = 0;
- while (tmpcount < len) {
- int tmplen = len - tmpcount;
- copy_to_pc(ramBase + curBuff + DataOffset, data + tmpcount,
- (tmplen < MaxData) ? tmplen : MaxData);
- tmpcount += MaxData;
-
- /* Advance to next buffer */
- curBuff = get_uint16(ramBase + curBuff);
- }
-
- /* Now issue transmit list */
- wait_WOC(iobase);
- writeb(NETWAVE_CMD_TL, ramBase + NETWAVE_EREG_CB + 0);
- writeb(len & 0xff, ramBase + NETWAVE_EREG_CB + 1);
- writeb((len>>8) & 0xff, ramBase + NETWAVE_EREG_CB + 2);
- writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3);
-
- spin_unlock_irqrestore(&priv->spinlock, flags);
- return 0;
-}
-
-static netdev_tx_t netwave_start_xmit(struct sk_buff *skb,
- struct net_device *dev) {
- /* This flag indicate that the hardware can't perform a transmission.
- * Theoritically, NET3 check it before sending a packet to the driver,
- * but in fact it never do that and pool continuously.
- * As the watchdog will abort too long transmissions, we are quite safe...
- */
-
- netif_stop_queue(dev);
-
- {
- short length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
- unsigned char* buf = skb->data;
-
- if (netwave_hw_xmit( buf, length, dev) == 1) {
- /* Some error, let's make them call us another time? */
- netif_start_queue(dev);
- }
- dev->trans_start = jiffies;
- }
- dev_kfree_skb(skb);
-
- return NETDEV_TX_OK;
-} /* netwave_start_xmit */
-
-/*
- * Function netwave_interrupt (irq, dev_id)
- *
- * This function is the interrupt handler for the Netwave card. This
- * routine will be called whenever:
- * 1. A packet is received.
- * 2. A packet has successfully been transferred and the unit is
- * ready to transmit another packet.
- * 3. A command has completed execution.
- */
-static irqreturn_t netwave_interrupt(int irq, void* dev_id)
-{
- unsigned int iobase;
- u_char __iomem *ramBase;
- struct net_device *dev = (struct net_device *)dev_id;
- struct netwave_private *priv = netdev_priv(dev);
- struct pcmcia_device *link = priv->p_dev;
- int i;
-
- if (!netif_device_present(dev))
- return IRQ_NONE;
-
- iobase = dev->base_addr;
- ramBase = priv->ramBase;
-
- /* Now find what caused the interrupt, check while interrupts ready */
- for (i = 0; i < 10; i++) {
- u_char status;
-
- wait_WOC(iobase);
- if (!(inb(iobase+NETWAVE_REG_CCSR) & 0x02))
- break; /* None of the interrupt sources asserted (normal exit) */
-
- status = inb(iobase + NETWAVE_REG_ASR);
-
- if (!pcmcia_dev_present(link)) {
- DEBUG(1, "netwave_interrupt: Interrupt with status 0x%x "
- "from removed or suspended card!\n", status);
- break;
- }
-
- /* RxRdy */
- if (status & 0x80) {
- netwave_rx(dev);
- /* wait_WOC(iobase); */
- /* RxRdy cannot be reset directly by the host */
- }
- /* RxErr */
- if (status & 0x40) {
- u_char rser;
-
- rser = readb(ramBase + NETWAVE_EREG_RSER);
-
- if (rser & 0x04) {
- ++dev->stats.rx_dropped;
- ++dev->stats.rx_crc_errors;
- }
- if (rser & 0x02)
- ++dev->stats.rx_frame_errors;
-
- /* Clear the RxErr bit in RSER. RSER+4 is the
- * write part. Also clear the RxCRC (0x04) and
- * RxBig (0x02) bits if present */
- wait_WOC(iobase);
- writeb(0x40 | (rser & 0x06), ramBase + NETWAVE_EREG_RSER + 4);
-
- /* Write bit 6 high to ASCC to clear RxErr in ASR,
- * WOC must be set first!
- */
- wait_WOC(iobase);
- writeb(0x40, ramBase + NETWAVE_EREG_ASCC);
-
- /* Remember to count up dev->stats on error packets */
- ++dev->stats.rx_errors;
- }
- /* TxDN */
- if (status & 0x20) {
- int txStatus;
-
- txStatus = readb(ramBase + NETWAVE_EREG_TSER);
- DEBUG(3, "Transmit done. TSER = %x id %x\n",
- txStatus, readb(ramBase + NETWAVE_EREG_TSER + 1));
-
- if (txStatus & 0x20) {
- /* Transmitting was okay, clear bits */
- wait_WOC(iobase);
- writeb(0x2f, ramBase + NETWAVE_EREG_TSER + 4);
- ++dev->stats.tx_packets;
- }
-
- if (txStatus & 0xd0) {
- if (txStatus & 0x80) {
- ++dev->stats.collisions; /* Because of /proc/net/dev*/
- /* ++dev->stats.tx_aborted_errors; */
- /* printk("Collision. %ld\n", jiffies - dev->trans_start); */
- }
- if (txStatus & 0x40)
- ++dev->stats.tx_carrier_errors;
- /* 0x80 TxGU Transmit giveup - nine times and no luck
- * 0x40 TxNOAP No access point. Discarded packet.
- * 0x10 TxErr Transmit error. Always set when
- * TxGU and TxNOAP is set. (Those are the only ones
- * to set TxErr).
- */
- DEBUG(3, "netwave_interrupt: TxDN with error status %x\n",
- txStatus);
-
- /* Clear out TxGU, TxNOAP, TxErr and TxTrys */
- wait_WOC(iobase);
- writeb(0xdf & txStatus, ramBase+NETWAVE_EREG_TSER+4);
- ++dev->stats.tx_errors;
- }
- DEBUG(3, "New status is TSER %x ASR %x\n",
- readb(ramBase + NETWAVE_EREG_TSER),
- inb(iobase + NETWAVE_REG_ASR));
-
- netif_wake_queue(dev);
- }
- /* TxBA, this would trigger on all error packets received */
- /* if (status & 0x01) {
- DEBUG(4, "Transmit buffers available, %x\n", status);
- }
- */
- }
- /* Handled if we looped at least one time - Jean II */
- return IRQ_RETVAL(i);
-} /* netwave_interrupt */
-
-/*
- * Function netwave_watchdog (a)
- *
- * Watchdog : when we start a transmission, we set a timer in the
- * kernel. If the transmission complete, this timer is disabled. If
- * it expire, we reset the card.
- *
- */
-static void netwave_watchdog(struct net_device *dev) {
-
- DEBUG(1, "%s: netwave_watchdog: watchdog timer expired\n", dev->name);
- netwave_reset(dev);
- dev->trans_start = jiffies;
- netif_wake_queue(dev);
-} /* netwave_watchdog */
-
-static int netwave_rx(struct net_device *dev)
-{
- netwave_private *priv = netdev_priv(dev);
- u_char __iomem *ramBase = priv->ramBase;
- unsigned int iobase = dev->base_addr;
- u_char rxStatus;
- struct sk_buff *skb = NULL;
- unsigned int curBuffer,
- rcvList;
- int rcvLen;
- int tmpcount = 0;
- int dataCount, dataOffset;
- int i;
- u_char *ptr;
-
- DEBUG(3, "xinw_rx: Receiving ... \n");
-
- /* Receive max 10 packets for now. */
- for (i = 0; i < 10; i++) {
- /* Any packets? */
- wait_WOC(iobase);
- rxStatus = readb(ramBase + NETWAVE_EREG_RSER);
- if ( !( rxStatus & 0x80)) /* No more packets */
- break;
-
- /* Check if multicast/broadcast or other */
- /* multicast = (rxStatus & 0x20); */
-
- /* The receive list pointer and length of the packet */
- wait_WOC(iobase);
- rcvLen = get_int16( ramBase + NETWAVE_EREG_RDP);
- rcvList = get_uint16( ramBase + NETWAVE_EREG_RDP + 2);
-
- if (rcvLen < 0) {
- printk(KERN_DEBUG "netwave_rx: Receive packet with len %d\n",
- rcvLen);
- return 0;
- }
-
- skb = dev_alloc_skb(rcvLen+5);
- if (skb == NULL) {
- DEBUG(1, "netwave_rx: Could not allocate an sk_buff of "
- "length %d\n", rcvLen);
- ++dev->stats.rx_dropped;
- /* Tell the adapter to skip the packet */
- wait_WOC(iobase);
- writeb(NETWAVE_CMD_SRP, ramBase + NETWAVE_EREG_CB + 0);
- writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1);
- return 0;
- }
-
- skb_reserve( skb, 2); /* Align IP on 16 byte */
- skb_put( skb, rcvLen);
-
- /* Copy packet fragments to the skb data area */
- ptr = (u_char*) skb->data;
- curBuffer = rcvList;
- tmpcount = 0;
- while ( tmpcount < rcvLen) {
- /* Get length and offset of current buffer */
- dataCount = get_uint16( ramBase+curBuffer+2);
- dataOffset = get_uint16( ramBase+curBuffer+4);
-
- copy_from_pc( ptr + tmpcount,
- ramBase+curBuffer+dataOffset, dataCount);
-
- tmpcount += dataCount;
-
- /* Point to next buffer */
- curBuffer = get_uint16(ramBase + curBuffer);
- }
-
- skb->protocol = eth_type_trans(skb,dev);
- /* Queue packet for network layer */
- netif_rx(skb);
-
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += rcvLen;
-
- /* Got the packet, tell the adapter to skip it */
- wait_WOC(iobase);
- writeb(NETWAVE_CMD_SRP, ramBase + NETWAVE_EREG_CB + 0);
- writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1);
- DEBUG(3, "Packet reception ok\n");
- }
- return 0;
-}
-
-static int netwave_open(struct net_device *dev) {
- netwave_private *priv = netdev_priv(dev);
- struct pcmcia_device *link = priv->p_dev;
-
- DEBUG(1, "netwave_open: starting.\n");
-
- if (!pcmcia_dev_present(link))
- return -ENODEV;
-
- link->open++;
-
- netif_start_queue(dev);
- netwave_reset(dev);
-
- return 0;
-}
-
-static int netwave_close(struct net_device *dev) {
- netwave_private *priv = netdev_priv(dev);
- struct pcmcia_device *link = priv->p_dev;
-
- DEBUG(1, "netwave_close: finishing.\n");
-
- link->open--;
- netif_stop_queue(dev);
-
- return 0;
-}
-
-static struct pcmcia_device_id netwave_ids[] = {
- PCMCIA_DEVICE_PROD_ID12("Xircom", "CreditCard Netwave", 0x2e3ee845, 0x54e28a28),
- PCMCIA_DEVICE_NULL,
-};
-MODULE_DEVICE_TABLE(pcmcia, netwave_ids);
-
-static struct pcmcia_driver netwave_driver = {
- .owner = THIS_MODULE,
- .drv = {
- .name = "netwave_cs",
- },
- .probe = netwave_probe,
- .remove = netwave_detach,
- .id_table = netwave_ids,
- .suspend = netwave_suspend,
- .resume = netwave_resume,
-};
-
-static int __init init_netwave_cs(void)
-{
- return pcmcia_register_driver(&netwave_driver);
-}
-
-static void __exit exit_netwave_cs(void)
-{
- pcmcia_unregister_driver(&netwave_driver);
-}
-
-module_init(init_netwave_cs);
-module_exit(exit_netwave_cs);
-
-/* Set or clear the multicast filter for this adaptor.
- num_addrs == -1 Promiscuous mode, receive all packets
- num_addrs == 0 Normal mode, clear multicast list
- num_addrs > 0 Multicast mode, receive normal and MC packets, and do
- best-effort filtering.
- */
-static void set_multicast_list(struct net_device *dev)
-{
- unsigned int iobase = dev->base_addr;
- netwave_private *priv = netdev_priv(dev);
- u_char __iomem * ramBase = priv->ramBase;
- u_char rcvMode = 0;
-
-#ifdef PCMCIA_DEBUG
- if (pc_debug > 2) {
- static int old;
- if (old != dev->mc_count) {
- old = dev->mc_count;
- DEBUG(0, "%s: setting Rx mode to %d addresses.\n",
- dev->name, dev->mc_count);
- }
- }
-#endif
-
- if (dev->mc_count || (dev->flags & IFF_ALLMULTI)) {
- /* Multicast Mode */
- rcvMode = rxConfRxEna + rxConfAMP + rxConfBcast;
- } else if (dev->flags & IFF_PROMISC) {
- /* Promiscous mode */
- rcvMode = rxConfRxEna + rxConfPro + rxConfAMP + rxConfBcast;
- } else {
- /* Normal mode */
- rcvMode = rxConfRxEna + rxConfBcast;
- }
-
- /* printk("netwave set_multicast_list: rcvMode to %x\n", rcvMode);*/
- /* Now set receive mode */
- wait_WOC(iobase);
- writeb(NETWAVE_CMD_SRC, ramBase + NETWAVE_EREG_CB + 0);
- writeb(rcvMode, ramBase + NETWAVE_EREG_CB + 1);
- writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 2);
-}
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 71cad2f..7e4a0b5 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -133,5 +133,7 @@ source "drivers/staging/arlan/Kconfig"
source "drivers/staging/wavelan/Kconfig"
+source "drivers/staging/netwave/Kconfig"
+
endif # !STAGING_EXCLUDE_BUILD
endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 95bc3e5..4cb1b78 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -49,3 +49,4 @@ obj-$(CONFIG_STRIP) += strip/
obj-$(CONFIG_ARLAN) += arlan/
obj-$(CONFIG_WAVELAN) += wavelan/
obj-$(CONFIG_PCMCIA_WAVELAN) += wavelan/
+obj-$(CONFIG_PCMCIA_NETWAVE) += netwave/
diff --git a/drivers/staging/netwave/Kconfig b/drivers/staging/netwave/Kconfig
new file mode 100644
index 0000000..b6f0f0a
--- /dev/null
+++ b/drivers/staging/netwave/Kconfig
@@ -0,0 +1,10 @@
+config PCMCIA_NETWAVE
+ tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
+ depends on PCMCIA
+ select WIRELESS_EXT
+ help
+ Say Y here if you intend to attach this type of PCMCIA (PC-card)
+ wireless Ethernet networking card to your computer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called netwave_cs. If unsure, say N.
diff --git a/drivers/staging/netwave/Makefile b/drivers/staging/netwave/Makefile
new file mode 100644
index 0000000..2ab89de
--- /dev/null
+++ b/drivers/staging/netwave/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_PCMCIA_NETWAVE) += netwave_cs.o
diff --git a/drivers/staging/netwave/netwave_cs.c b/drivers/staging/netwave/netwave_cs.c
new file mode 100644
index 0000000..9498b46
--- /dev/null
+++ b/drivers/staging/netwave/netwave_cs.c
@@ -0,0 +1,1389 @@
+/*********************************************************************
+ *
+ * Filename: netwave_cs.c
+ * Version: 0.4.1
+ * Description: Netwave AirSurfer Wireless LAN PC Card driver
+ * Status: Experimental.
+ * Authors: John Markus Bjørndalen <johnm@...uit.no>
+ * Dag Brattli <dagb@...uit.no>
+ * David Hinds <dahinds@...rs.sourceforge.net>
+ * Created at: A long time ago!
+ * Modified at: Mon Nov 10 11:54:37 1997
+ * Modified by: Dag Brattli <dagb@...uit.no>
+ *
+ * Copyright (c) 1997 University of Tromsø, Norway
+ *
+ * Revision History:
+ *
+ * 08-Nov-97 15:14:47 John Markus Bjørndalen <johnm@...uit.no>
+ * - Fixed some bugs in netwave_rx and cleaned it up a bit.
+ * (One of the bugs would have destroyed packets when receiving
+ * multiple packets per interrupt).
+ * - Cleaned up parts of newave_hw_xmit.
+ * - A few general cleanups.
+ * 24-Oct-97 13:17:36 Dag Brattli <dagb@...uit.no>
+ * - Fixed netwave_rx receive function (got updated docs)
+ * Others:
+ * - Changed name from xircnw to netwave, take a look at
+ * http://www.netwave-wireless.com
+ * - Some reorganizing of the code
+ * - Removed possible race condition between interrupt handler and transmit
+ * function
+ * - Started to add wireless extensions, but still needs some coding
+ * - Added watchdog for better handling of transmission timeouts
+ * (hopefully this works better)
+ ********************************************************************/
+
+/* To have statistics (just packets sent) define this */
+#undef NETWAVE_STATS
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/bitops.h>
+#include <linux/wireless.h>
+#include <net/iw_handler.h>
+
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ds.h>
+#include <pcmcia/mem_op.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+
+#define NETWAVE_REGOFF 0x8000
+/* The Netwave IO registers, offsets to iobase */
+#define NETWAVE_REG_COR 0x0
+#define NETWAVE_REG_CCSR 0x2
+#define NETWAVE_REG_ASR 0x4
+#define NETWAVE_REG_IMR 0xa
+#define NETWAVE_REG_PMR 0xc
+#define NETWAVE_REG_IOLOW 0x6
+#define NETWAVE_REG_IOHI 0x7
+#define NETWAVE_REG_IOCONTROL 0x8
+#define NETWAVE_REG_DATA 0xf
+/* The Netwave Extended IO registers, offsets to RamBase */
+#define NETWAVE_EREG_ASCC 0x114
+#define NETWAVE_EREG_RSER 0x120
+#define NETWAVE_EREG_RSERW 0x124
+#define NETWAVE_EREG_TSER 0x130
+#define NETWAVE_EREG_TSERW 0x134
+#define NETWAVE_EREG_CB 0x100
+#define NETWAVE_EREG_SPCQ 0x154
+#define NETWAVE_EREG_SPU 0x155
+#define NETWAVE_EREG_LIF 0x14e
+#define NETWAVE_EREG_ISPLQ 0x156
+#define NETWAVE_EREG_HHC 0x158
+#define NETWAVE_EREG_NI 0x16e
+#define NETWAVE_EREG_MHS 0x16b
+#define NETWAVE_EREG_TDP 0x140
+#define NETWAVE_EREG_RDP 0x150
+#define NETWAVE_EREG_PA 0x160
+#define NETWAVE_EREG_EC 0x180
+#define NETWAVE_EREG_CRBP 0x17a
+#define NETWAVE_EREG_ARW 0x166
+
+/*
+ * Commands used in the extended command buffer
+ * NETWAVE_EREG_CB (0x100-0x10F)
+ */
+#define NETWAVE_CMD_NOP 0x00
+#define NETWAVE_CMD_SRC 0x01
+#define NETWAVE_CMD_STC 0x02
+#define NETWAVE_CMD_AMA 0x03
+#define NETWAVE_CMD_DMA 0x04
+#define NETWAVE_CMD_SAMA 0x05
+#define NETWAVE_CMD_ER 0x06
+#define NETWAVE_CMD_DR 0x07
+#define NETWAVE_CMD_TL 0x08
+#define NETWAVE_CMD_SRP 0x09
+#define NETWAVE_CMD_SSK 0x0a
+#define NETWAVE_CMD_SMD 0x0b
+#define NETWAVE_CMD_SAPD 0x0c
+#define NETWAVE_CMD_SSS 0x11
+/* End of Command marker */
+#define NETWAVE_CMD_EOC 0x00
+
+/* ASR register bits */
+#define NETWAVE_ASR_RXRDY 0x80
+#define NETWAVE_ASR_TXBA 0x01
+
+#define TX_TIMEOUT ((32*HZ)/100)
+
+static const unsigned int imrConfRFU1 = 0x10; /* RFU interrupt mask, keep high */
+static const unsigned int imrConfIENA = 0x02; /* Interrupt enable */
+
+static const unsigned int corConfIENA = 0x01; /* Interrupt enable */
+static const unsigned int corConfLVLREQ = 0x40; /* Keep high */
+
+static const unsigned int rxConfRxEna = 0x80; /* Receive Enable */
+static const unsigned int rxConfMAC = 0x20; /* MAC host receive mode*/
+static const unsigned int rxConfPro = 0x10; /* Promiscuous */
+static const unsigned int rxConfAMP = 0x08; /* Accept Multicast Packets */
+static const unsigned int rxConfBcast = 0x04; /* Accept Broadcast Packets */
+
+static const unsigned int txConfTxEna = 0x80; /* Transmit Enable */
+static const unsigned int txConfMAC = 0x20; /* Host sends MAC mode */
+static const unsigned int txConfEUD = 0x10; /* Enable Uni-Data packets */
+static const unsigned int txConfKey = 0x02; /* Scramble data packets */
+static const unsigned int txConfLoop = 0x01; /* Loopback mode */
+
+/*
+ All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
+ you do not define PCMCIA_DEBUG at all, all the debug code will be
+ left out. If you compile with PCMCIA_DEBUG=0, the debug code will
+ be present but disabled -- but it can then be enabled for specific
+ modules at load time with a 'pc_debug=#' option to insmod.
+*/
+
+#ifdef PCMCIA_DEBUG
+static int pc_debug = PCMCIA_DEBUG;
+module_param(pc_debug, int, 0);
+#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
+static char *version =
+"netwave_cs.c 0.3.0 Thu Jul 17 14:36:02 1997 (John Markus Bjørndalen)\n";
+#else
+#define DEBUG(n, args...)
+#endif
+
+/*====================================================================*/
+
+/* Parameters that can be set with 'insmod' */
+
+/* Choose the domain, default is 0x100 */
+static u_int domain = 0x100;
+
+/* Scramble key, range from 0x0 to 0xffff.
+ * 0x0 is no scrambling.
+ */
+static u_int scramble_key = 0x0;
+
+/* Shared memory speed, in ns. The documentation states that
+ * the card should not be read faster than every 400ns.
+ * This timing should be provided by the HBA. If it becomes a
+ * problem, try setting mem_speed to 400.
+ */
+static int mem_speed;
+
+module_param(domain, int, 0);
+module_param(scramble_key, int, 0);
+module_param(mem_speed, int, 0);
+
+/*====================================================================*/
+
+/* PCMCIA (Card Services) related functions */
+static void netwave_release(struct pcmcia_device *link); /* Card removal */
+static int netwave_pcmcia_config(struct pcmcia_device *arg); /* Runs after card
+ insertion */
+static void netwave_detach(struct pcmcia_device *p_dev); /* Destroy instance */
+
+/* Hardware configuration */
+static void netwave_doreset(unsigned int iobase, u_char __iomem *ramBase);
+static void netwave_reset(struct net_device *dev);
+
+/* Misc device stuff */
+static int netwave_open(struct net_device *dev); /* Open the device */
+static int netwave_close(struct net_device *dev); /* Close the device */
+
+/* Packet transmission and Packet reception */
+static netdev_tx_t netwave_start_xmit( struct sk_buff *skb,
+ struct net_device *dev);
+static int netwave_rx( struct net_device *dev);
+
+/* Interrupt routines */
+static irqreturn_t netwave_interrupt(int irq, void *dev_id);
+static void netwave_watchdog(struct net_device *);
+
+/* Wireless extensions */
+static struct iw_statistics* netwave_get_wireless_stats(struct net_device *dev);
+
+static void set_multicast_list(struct net_device *dev);
+
+/*
+ A struct pcmcia_device structure has fields for most things that are needed
+ to keep track of a socket, but there will usually be some device
+ specific information that also needs to be kept track of. The
+ 'priv' pointer in a struct pcmcia_device structure can be used to point to
+ a device-specific private data structure, like this.
+
+ A driver needs to provide a dev_node_t structure for each device
+ on a card. In some cases, there is only one device per card (for
+ example, ethernet cards, modems). In other cases, there may be
+ many actual or logical devices (SCSI adapters, memory cards with
+ multiple partitions). The dev_node_t structures need to be kept
+ in a linked list starting at the 'dev' field of a struct pcmcia_device
+ structure. We allocate them in the card's private data structure,
+ because they generally can't be allocated dynamically.
+*/
+
+static const struct iw_handler_def netwave_handler_def;
+
+#define SIOCGIPSNAP SIOCIWFIRSTPRIV + 1 /* Site Survey Snapshot */
+
+#define MAX_ESA 10
+
+typedef struct net_addr {
+ u_char addr48[6];
+} net_addr;
+
+struct site_survey {
+ u_short length;
+ u_char struct_revision;
+ u_char roaming_state;
+
+ u_char sp_existsFlag;
+ u_char sp_link_quality;
+ u_char sp_max_link_quality;
+ u_char linkQualityGoodFairBoundary;
+ u_char linkQualityFairPoorBoundary;
+ u_char sp_utilization;
+ u_char sp_goodness;
+ u_char sp_hotheadcount;
+ u_char roaming_condition;
+
+ net_addr sp;
+ u_char numAPs;
+ net_addr nearByAccessPoints[MAX_ESA];
+};
+
+typedef struct netwave_private {
+ struct pcmcia_device *p_dev;
+ spinlock_t spinlock; /* Serialize access to the hardware (SMP) */
+ dev_node_t node;
+ u_char __iomem *ramBase;
+ int timeoutCounter;
+ int lastExec;
+ struct timer_list watchdog; /* To avoid blocking state */
+ struct site_survey nss;
+ struct iw_statistics iw_stats; /* Wireless stats */
+} netwave_private;
+
+/*
+ * The Netwave card is little-endian, so won't work for big endian
+ * systems.
+ */
+static inline unsigned short get_uint16(u_char __iomem *staddr)
+{
+ return readw(staddr); /* Return only 16 bits */
+}
+
+static inline short get_int16(u_char __iomem * staddr)
+{
+ return readw(staddr);
+}
+
+/*
+ * Wait until the WOC (Write Operation Complete) bit in the
+ * ASR (Adapter Status Register) is asserted.
+ * This should have aborted if it takes too long time.
+ */
+static inline void wait_WOC(unsigned int iobase)
+{
+ /* Spin lock */
+ while ((inb(iobase + NETWAVE_REG_ASR) & 0x8) != 0x8) ;
+}
+
+static void netwave_snapshot(netwave_private *priv, u_char __iomem *ramBase,
+ unsigned int iobase) {
+ u_short resultBuffer;
+
+ /* if time since last snapshot is > 1 sec. (100 jiffies?) then take
+ * new snapshot, else return cached data. This is the recommended rate.
+ */
+ if ( jiffies - priv->lastExec > 100) {
+ /* Take site survey snapshot */
+ /*printk( KERN_DEBUG "Taking new snapshot. %ld\n", jiffies -
+ priv->lastExec); */
+ wait_WOC(iobase);
+ writeb(NETWAVE_CMD_SSS, ramBase + NETWAVE_EREG_CB + 0);
+ writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1);
+ wait_WOC(iobase);
+
+ /* Get result and copy to cach */
+ resultBuffer = readw(ramBase + NETWAVE_EREG_CRBP);
+ copy_from_pc( &priv->nss, ramBase+resultBuffer,
+ sizeof(struct site_survey));
+ }
+}
+
+/*
+ * Function netwave_get_wireless_stats (dev)
+ *
+ * Wireless extensions statistics
+ *
+ */
+static struct iw_statistics *netwave_get_wireless_stats(struct net_device *dev)
+{
+ unsigned long flags;
+ unsigned int iobase = dev->base_addr;
+ netwave_private *priv = netdev_priv(dev);
+ u_char __iomem *ramBase = priv->ramBase;
+ struct iw_statistics* wstats;
+
+ wstats = &priv->iw_stats;
+
+ spin_lock_irqsave(&priv->spinlock, flags);
+
+ netwave_snapshot( priv, ramBase, iobase);
+
+ wstats->status = priv->nss.roaming_state;
+ wstats->qual.qual = readb( ramBase + NETWAVE_EREG_SPCQ);
+ wstats->qual.level = readb( ramBase + NETWAVE_EREG_ISPLQ);
+ wstats->qual.noise = readb( ramBase + NETWAVE_EREG_SPU) & 0x3f;
+ wstats->discard.nwid = 0L;
+ wstats->discard.code = 0L;
+ wstats->discard.misc = 0L;
+
+ spin_unlock_irqrestore(&priv->spinlock, flags);
+
+ return &priv->iw_stats;
+}
+
+static const struct net_device_ops netwave_netdev_ops = {
+ .ndo_open = netwave_open,
+ .ndo_stop = netwave_close,
+ .ndo_start_xmit = netwave_start_xmit,
+ .ndo_set_multicast_list = set_multicast_list,
+ .ndo_tx_timeout = netwave_watchdog,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+/*
+ * Function netwave_attach (void)
+ *
+ * Creates an "instance" of the driver, allocating local data
+ * structures for one device. The device is registered with Card
+ * Services.
+ *
+ * The dev_link structure is initialized, but we don't actually
+ * configure the card at this point -- we wait until we receive a
+ * card insertion event.
+ */
+static int netwave_probe(struct pcmcia_device *link)
+{
+ struct net_device *dev;
+ netwave_private *priv;
+
+ DEBUG(0, "netwave_attach()\n");
+
+ /* Initialize the struct pcmcia_device structure */
+ dev = alloc_etherdev(sizeof(netwave_private));
+ if (!dev)
+ return -ENOMEM;
+ priv = netdev_priv(dev);
+ priv->p_dev = link;
+ link->priv = dev;
+
+ /* The io structure describes IO port mapping */
+ link->io.NumPorts1 = 16;
+ link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ /* link->io.NumPorts2 = 16;
+ link->io.Attributes2 = IO_DATA_PATH_WIDTH_16; */
+ link->io.IOAddrLines = 5;
+
+ /* Interrupt setup */
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
+ link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+ link->irq.Handler = &netwave_interrupt;
+
+ /* General socket configuration */
+ link->conf.Attributes = CONF_ENABLE_IRQ;
+ link->conf.IntType = INT_MEMORY_AND_IO;
+ link->conf.ConfigIndex = 1;
+
+ /* Netwave private struct init. link/dev/node already taken care of,
+ * other stuff zero'd - Jean II */
+ spin_lock_init(&priv->spinlock);
+
+ /* Netwave specific entries in the device structure */
+ dev->netdev_ops = &netwave_netdev_ops;
+ /* wireless extensions */
+ dev->wireless_handlers = &netwave_handler_def;
+
+ dev->watchdog_timeo = TX_TIMEOUT;
+
+ link->irq.Instance = dev;
+
+ return netwave_pcmcia_config( link);
+} /* netwave_attach */
+
+/*
+ * Function netwave_detach (link)
+ *
+ * This deletes a driver "instance". The device is de-registered
+ * with Card Services. If it has been released, all local data
+ * structures are freed. Otherwise, the structures will be freed
+ * when the device is released.
+ */
+static void netwave_detach(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+
+ DEBUG(0, "netwave_detach(0x%p)\n", link);
+
+ netwave_release(link);
+
+ if (link->dev_node)
+ unregister_netdev(dev);
+
+ free_netdev(dev);
+} /* netwave_detach */
+
+/*
+ * Wireless Handler : get protocol name
+ */
+static int netwave_get_name(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ strcpy(wrqu->name, "Netwave");
+ return 0;
+}
+
+/*
+ * Wireless Handler : set Network ID
+ */
+static int netwave_set_nwid(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ unsigned long flags;
+ unsigned int iobase = dev->base_addr;
+ netwave_private *priv = netdev_priv(dev);
+ u_char __iomem *ramBase = priv->ramBase;
+
+ /* Disable interrupts & save flags */
+ spin_lock_irqsave(&priv->spinlock, flags);
+
+ if(!wrqu->nwid.disabled) {
+ domain = wrqu->nwid.value;
+ printk( KERN_DEBUG "Setting domain to 0x%x%02x\n",
+ (domain >> 8) & 0x01, domain & 0xff);
+ wait_WOC(iobase);
+ writeb(NETWAVE_CMD_SMD, ramBase + NETWAVE_EREG_CB + 0);
+ writeb( domain & 0xff, ramBase + NETWAVE_EREG_CB + 1);
+ writeb((domain >>8 ) & 0x01,ramBase + NETWAVE_EREG_CB+2);
+ writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3);
+ }
+
+ /* ReEnable interrupts & restore flags */
+ spin_unlock_irqrestore(&priv->spinlock, flags);
+
+ return 0;
+}
+
+/*
+ * Wireless Handler : get Network ID
+ */
+static int netwave_get_nwid(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ wrqu->nwid.value = domain;
+ wrqu->nwid.disabled = 0;
+ wrqu->nwid.fixed = 1;
+ return 0;
+}
+
+/*
+ * Wireless Handler : set scramble key
+ */
+static int netwave_set_scramble(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *key)
+{
+ unsigned long flags;
+ unsigned int iobase = dev->base_addr;
+ netwave_private *priv = netdev_priv(dev);
+ u_char __iomem *ramBase = priv->ramBase;
+
+ /* Disable interrupts & save flags */
+ spin_lock_irqsave(&priv->spinlock, flags);
+
+ scramble_key = (key[0] << 8) | key[1];
+ wait_WOC(iobase);
+ writeb(NETWAVE_CMD_SSK, ramBase + NETWAVE_EREG_CB + 0);
+ writeb(scramble_key & 0xff, ramBase + NETWAVE_EREG_CB + 1);
+ writeb((scramble_key>>8) & 0xff, ramBase + NETWAVE_EREG_CB + 2);
+ writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3);
+
+ /* ReEnable interrupts & restore flags */
+ spin_unlock_irqrestore(&priv->spinlock, flags);
+
+ return 0;
+}
+
+/*
+ * Wireless Handler : get scramble key
+ */
+static int netwave_get_scramble(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *key)
+{
+ key[1] = scramble_key & 0xff;
+ key[0] = (scramble_key>>8) & 0xff;
+ wrqu->encoding.flags = IW_ENCODE_ENABLED;
+ wrqu->encoding.length = 2;
+ return 0;
+}
+
+/*
+ * Wireless Handler : get mode
+ */
+static int netwave_get_mode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ if(domain & 0x100)
+ wrqu->mode = IW_MODE_INFRA;
+ else
+ wrqu->mode = IW_MODE_ADHOC;
+
+ return 0;
+}
+
+/*
+ * Wireless Handler : get range info
+ */
+static int netwave_get_range(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct iw_range *range = (struct iw_range *) extra;
+ int ret = 0;
+
+ /* Set the length (very important for backward compatibility) */
+ wrqu->data.length = sizeof(struct iw_range);
+
+ /* Set all the info we don't care or don't know about to zero */
+ memset(range, 0, sizeof(struct iw_range));
+
+ /* Set the Wireless Extension versions */
+ range->we_version_compiled = WIRELESS_EXT;
+ range->we_version_source = 9; /* Nothing for us in v10 and v11 */
+
+ /* Set information in the range struct */
+ range->throughput = 450 * 1000; /* don't argue on this ! */
+ range->min_nwid = 0x0000;
+ range->max_nwid = 0x01FF;
+
+ range->num_channels = range->num_frequency = 0;
+
+ range->sensitivity = 0x3F;
+ range->max_qual.qual = 255;
+ range->max_qual.level = 255;
+ range->max_qual.noise = 0;
+
+ range->num_bitrates = 1;
+ range->bitrate[0] = 1000000; /* 1 Mb/s */
+
+ range->encoding_size[0] = 2; /* 16 bits scrambling */
+ range->num_encoding_sizes = 1;
+ range->max_encoding_tokens = 1; /* Only one key possible */
+
+ return ret;
+}
+
+/*
+ * Wireless Private Handler : get snapshot
+ */
+static int netwave_get_snap(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ unsigned long flags;
+ unsigned int iobase = dev->base_addr;
+ netwave_private *priv = netdev_priv(dev);
+ u_char __iomem *ramBase = priv->ramBase;
+
+ /* Disable interrupts & save flags */
+ spin_lock_irqsave(&priv->spinlock, flags);
+
+ /* Take snapshot of environment */
+ netwave_snapshot( priv, ramBase, iobase);
+ wrqu->data.length = priv->nss.length;
+ memcpy(extra, (u_char *) &priv->nss, sizeof( struct site_survey));
+
+ priv->lastExec = jiffies;
+
+ /* ReEnable interrupts & restore flags */
+ spin_unlock_irqrestore(&priv->spinlock, flags);
+
+ return(0);
+}
+
+/*
+ * Structures to export the Wireless Handlers
+ * This is the stuff that are treated the wireless extensions (iwconfig)
+ */
+
+static const struct iw_priv_args netwave_private_args[] = {
+/*{ cmd, set_args, get_args, name } */
+ { SIOCGIPSNAP, 0,
+ IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | sizeof(struct site_survey),
+ "getsitesurvey" },
+};
+
+static const iw_handler netwave_handler[] =
+{
+ NULL, /* SIOCSIWNAME */
+ netwave_get_name, /* SIOCGIWNAME */
+ netwave_set_nwid, /* SIOCSIWNWID */
+ netwave_get_nwid, /* SIOCGIWNWID */
+ NULL, /* SIOCSIWFREQ */
+ NULL, /* SIOCGIWFREQ */
+ NULL, /* SIOCSIWMODE */
+ netwave_get_mode, /* SIOCGIWMODE */
+ NULL, /* SIOCSIWSENS */
+ NULL, /* SIOCGIWSENS */
+ NULL, /* SIOCSIWRANGE */
+ netwave_get_range, /* SIOCGIWRANGE */
+ NULL, /* SIOCSIWPRIV */
+ NULL, /* SIOCGIWPRIV */
+ NULL, /* SIOCSIWSTATS */
+ NULL, /* SIOCGIWSTATS */
+ NULL, /* SIOCSIWSPY */
+ NULL, /* SIOCGIWSPY */
+ NULL, /* -- hole -- */
+ NULL, /* -- hole -- */
+ NULL, /* SIOCSIWAP */
+ NULL, /* SIOCGIWAP */
+ NULL, /* -- hole -- */
+ NULL, /* SIOCGIWAPLIST */
+ NULL, /* -- hole -- */
+ NULL, /* -- hole -- */
+ NULL, /* SIOCSIWESSID */
+ NULL, /* SIOCGIWESSID */
+ NULL, /* SIOCSIWNICKN */
+ NULL, /* SIOCGIWNICKN */
+ NULL, /* -- hole -- */
+ NULL, /* -- hole -- */
+ NULL, /* SIOCSIWRATE */
+ NULL, /* SIOCGIWRATE */
+ NULL, /* SIOCSIWRTS */
+ NULL, /* SIOCGIWRTS */
+ NULL, /* SIOCSIWFRAG */
+ NULL, /* SIOCGIWFRAG */
+ NULL, /* SIOCSIWTXPOW */
+ NULL, /* SIOCGIWTXPOW */
+ NULL, /* SIOCSIWRETRY */
+ NULL, /* SIOCGIWRETRY */
+ netwave_set_scramble, /* SIOCSIWENCODE */
+ netwave_get_scramble, /* SIOCGIWENCODE */
+};
+
+static const iw_handler netwave_private_handler[] =
+{
+ NULL, /* SIOCIWFIRSTPRIV */
+ netwave_get_snap, /* SIOCIWFIRSTPRIV + 1 */
+};
+
+static const struct iw_handler_def netwave_handler_def =
+{
+ .num_standard = ARRAY_SIZE(netwave_handler),
+ .num_private = ARRAY_SIZE(netwave_private_handler),
+ .num_private_args = ARRAY_SIZE(netwave_private_args),
+ .standard = (iw_handler *) netwave_handler,
+ .private = (iw_handler *) netwave_private_handler,
+ .private_args = (struct iw_priv_args *) netwave_private_args,
+ .get_wireless_stats = netwave_get_wireless_stats,
+};
+
+/*
+ * Function netwave_pcmcia_config (link)
+ *
+ * netwave_pcmcia_config() is scheduled to run after a CARD_INSERTION
+ * event is received, to configure the PCMCIA socket, and to make the
+ * device available to the system.
+ *
+ */
+
+#define CS_CHECK(fn, ret) \
+do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+
+static int netwave_pcmcia_config(struct pcmcia_device *link) {
+ struct net_device *dev = link->priv;
+ netwave_private *priv = netdev_priv(dev);
+ int i, j, last_ret, last_fn;
+ win_req_t req;
+ memreq_t mem;
+ u_char __iomem *ramBase = NULL;
+
+ DEBUG(0, "netwave_pcmcia_config(0x%p)\n", link);
+
+ /*
+ * Try allocating IO ports. This tries a few fixed addresses.
+ * If you want, you can also read the card's config table to
+ * pick addresses -- see the serial driver for an example.
+ */
+ for (i = j = 0x0; j < 0x400; j += 0x20) {
+ link->io.BasePort1 = j ^ 0x300;
+ i = pcmcia_request_io(link, &link->io);
+ if (i == 0)
+ break;
+ }
+ if (i != 0) {
+ cs_error(link, RequestIO, i);
+ goto failed;
+ }
+
+ /*
+ * Now allocate an interrupt line. Note that this does not
+ * actually assign a handler to the interrupt.
+ */
+ CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+
+ /*
+ * This actually configures the PCMCIA socket -- setting up
+ * the I/O windows and the interrupt mapping.
+ */
+ CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+
+ /*
+ * Allocate a 32K memory window. Note that the struct pcmcia_device
+ * structure provides space for one window handle -- if your
+ * device needs several windows, you'll need to keep track of
+ * the handles in your private data structure, dev->priv.
+ */
+ DEBUG(1, "Setting mem speed of %d\n", mem_speed);
+
+ req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_CM|WIN_ENABLE;
+ req.Base = 0; req.Size = 0x8000;
+ req.AccessSpeed = mem_speed;
+ CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &link->win));
+ mem.CardOffset = 0x20000; mem.Page = 0;
+ CS_CHECK(MapMemPage, pcmcia_map_mem_page(link->win, &mem));
+
+ /* Store base address of the common window frame */
+ ramBase = ioremap(req.Base, 0x8000);
+ priv->ramBase = ramBase;
+
+ dev->irq = link->irq.AssignedIRQ;
+ dev->base_addr = link->io.BasePort1;
+ SET_NETDEV_DEV(dev, &handle_to_dev(link));
+
+ if (register_netdev(dev) != 0) {
+ printk(KERN_DEBUG "netwave_cs: register_netdev() failed\n");
+ goto failed;
+ }
+
+ strcpy(priv->node.dev_name, dev->name);
+ link->dev_node = &priv->node;
+
+ /* Reset card before reading physical address */
+ netwave_doreset(dev->base_addr, ramBase);
+
+ /* Read the ethernet address and fill in the Netwave registers. */
+ for (i = 0; i < 6; i++)
+ dev->dev_addr[i] = readb(ramBase + NETWAVE_EREG_PA + i);
+
+ printk(KERN_INFO "%s: Netwave: port %#3lx, irq %d, mem %lx, "
+ "id %c%c, hw_addr %pM\n",
+ dev->name, dev->base_addr, dev->irq,
+ (u_long) ramBase,
+ (int) readb(ramBase+NETWAVE_EREG_NI),
+ (int) readb(ramBase+NETWAVE_EREG_NI+1),
+ dev->dev_addr);
+
+ /* get revision words */
+ printk(KERN_DEBUG "Netwave_reset: revision %04x %04x\n",
+ get_uint16(ramBase + NETWAVE_EREG_ARW),
+ get_uint16(ramBase + NETWAVE_EREG_ARW+2));
+ return 0;
+
+cs_failed:
+ cs_error(link, last_fn, last_ret);
+failed:
+ netwave_release(link);
+ return -ENODEV;
+} /* netwave_pcmcia_config */
+
+/*
+ * Function netwave_release (arg)
+ *
+ * After a card is removed, netwave_release() will unregister the net
+ * device, and release the PCMCIA configuration. If the device is
+ * still open, this will be postponed until it is closed.
+ */
+static void netwave_release(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+ netwave_private *priv = netdev_priv(dev);
+
+ DEBUG(0, "netwave_release(0x%p)\n", link);
+
+ pcmcia_disable_device(link);
+ if (link->win)
+ iounmap(priv->ramBase);
+}
+
+static int netwave_suspend(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+
+ if (link->open)
+ netif_device_detach(dev);
+
+ return 0;
+}
+
+static int netwave_resume(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+
+ if (link->open) {
+ netwave_reset(dev);
+ netif_device_attach(dev);
+ }
+
+ return 0;
+}
+
+
+/*
+ * Function netwave_doreset (ioBase, ramBase)
+ *
+ * Proper hardware reset of the card.
+ */
+static void netwave_doreset(unsigned int ioBase, u_char __iomem *ramBase)
+{
+ /* Reset card */
+ wait_WOC(ioBase);
+ outb(0x80, ioBase + NETWAVE_REG_PMR);
+ writeb(0x08, ramBase + NETWAVE_EREG_ASCC); /* Bit 3 is WOC */
+ outb(0x0, ioBase + NETWAVE_REG_PMR); /* release reset */
+}
+
+/*
+ * Function netwave_reset (dev)
+ *
+ * Reset and restore all of the netwave registers
+ */
+static void netwave_reset(struct net_device *dev) {
+ /* u_char state; */
+ netwave_private *priv = netdev_priv(dev);
+ u_char __iomem *ramBase = priv->ramBase;
+ unsigned int iobase = dev->base_addr;
+
+ DEBUG(0, "netwave_reset: Done with hardware reset\n");
+
+ priv->timeoutCounter = 0;
+
+ /* Reset card */
+ netwave_doreset(iobase, ramBase);
+ printk(KERN_DEBUG "netwave_reset: Done with hardware reset\n");
+
+ /* Write a NOP to check the card */
+ wait_WOC(iobase);
+ writeb(NETWAVE_CMD_NOP, ramBase + NETWAVE_EREG_CB + 0);
+ writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1);
+
+ /* Set receive conf */
+ wait_WOC(iobase);
+ writeb(NETWAVE_CMD_SRC, ramBase + NETWAVE_EREG_CB + 0);
+ writeb(rxConfRxEna + rxConfBcast, ramBase + NETWAVE_EREG_CB + 1);
+ writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 2);
+
+ /* Set transmit conf */
+ wait_WOC(iobase);
+ writeb(NETWAVE_CMD_STC, ramBase + NETWAVE_EREG_CB + 0);
+ writeb(txConfTxEna, ramBase + NETWAVE_EREG_CB + 1);
+ writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 2);
+
+ /* Now set the MU Domain */
+ printk(KERN_DEBUG "Setting domain to 0x%x%02x\n", (domain >> 8) & 0x01, domain & 0xff);
+ wait_WOC(iobase);
+ writeb(NETWAVE_CMD_SMD, ramBase + NETWAVE_EREG_CB + 0);
+ writeb(domain & 0xff, ramBase + NETWAVE_EREG_CB + 1);
+ writeb((domain>>8) & 0x01, ramBase + NETWAVE_EREG_CB + 2);
+ writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3);
+
+ /* Set scramble key */
+ printk(KERN_DEBUG "Setting scramble key to 0x%x\n", scramble_key);
+ wait_WOC(iobase);
+ writeb(NETWAVE_CMD_SSK, ramBase + NETWAVE_EREG_CB + 0);
+ writeb(scramble_key & 0xff, ramBase + NETWAVE_EREG_CB + 1);
+ writeb((scramble_key>>8) & 0xff, ramBase + NETWAVE_EREG_CB + 2);
+ writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3);
+
+ /* Enable interrupts, bit 4 high to keep unused
+ * source from interrupting us, bit 2 high to
+ * set interrupt enable, 567 to enable TxDN,
+ * RxErr and RxRdy
+ */
+ wait_WOC(iobase);
+ outb(imrConfIENA+imrConfRFU1, iobase + NETWAVE_REG_IMR);
+
+ /* Hent 4 bytes fra 0x170. Skal vaere 0a,29,88,36
+ * waitWOC
+ * skriv 80 til d000:3688
+ * sjekk om det ble 80
+ */
+
+ /* Enable Receiver */
+ wait_WOC(iobase);
+ writeb(NETWAVE_CMD_ER, ramBase + NETWAVE_EREG_CB + 0);
+ writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1);
+
+ /* Set the IENA bit in COR */
+ wait_WOC(iobase);
+ outb(corConfIENA + corConfLVLREQ, iobase + NETWAVE_REG_COR);
+}
+
+/*
+ * Function netwave_hw_xmit (data, len, dev)
+ */
+static int netwave_hw_xmit(unsigned char* data, int len,
+ struct net_device* dev) {
+ unsigned long flags;
+ unsigned int TxFreeList,
+ curBuff,
+ MaxData,
+ DataOffset;
+ int tmpcount;
+
+ netwave_private *priv = netdev_priv(dev);
+ u_char __iomem * ramBase = priv->ramBase;
+ unsigned int iobase = dev->base_addr;
+
+ /* Disable interrupts & save flags */
+ spin_lock_irqsave(&priv->spinlock, flags);
+
+ /* Check if there are transmit buffers available */
+ wait_WOC(iobase);
+ if ((inb(iobase+NETWAVE_REG_ASR) & NETWAVE_ASR_TXBA) == 0) {
+ /* No buffers available */
+ printk(KERN_DEBUG "netwave_hw_xmit: %s - no xmit buffers available.\n",
+ dev->name);
+ spin_unlock_irqrestore(&priv->spinlock, flags);
+ return 1;
+ }
+
+ dev->stats.tx_bytes += len;
+
+ DEBUG(3, "Transmitting with SPCQ %x SPU %x LIF %x ISPLQ %x\n",
+ readb(ramBase + NETWAVE_EREG_SPCQ),
+ readb(ramBase + NETWAVE_EREG_SPU),
+ readb(ramBase + NETWAVE_EREG_LIF),
+ readb(ramBase + NETWAVE_EREG_ISPLQ));
+
+ /* Now try to insert it into the adapters free memory */
+ wait_WOC(iobase);
+ TxFreeList = get_uint16(ramBase + NETWAVE_EREG_TDP);
+ MaxData = get_uint16(ramBase + NETWAVE_EREG_TDP+2);
+ DataOffset = get_uint16(ramBase + NETWAVE_EREG_TDP+4);
+
+ DEBUG(3, "TxFreeList %x, MaxData %x, DataOffset %x\n",
+ TxFreeList, MaxData, DataOffset);
+
+ /* Copy packet to the adapter fragment buffers */
+ curBuff = TxFreeList;
+ tmpcount = 0;
+ while (tmpcount < len) {
+ int tmplen = len - tmpcount;
+ copy_to_pc(ramBase + curBuff + DataOffset, data + tmpcount,
+ (tmplen < MaxData) ? tmplen : MaxData);
+ tmpcount += MaxData;
+
+ /* Advance to next buffer */
+ curBuff = get_uint16(ramBase + curBuff);
+ }
+
+ /* Now issue transmit list */
+ wait_WOC(iobase);
+ writeb(NETWAVE_CMD_TL, ramBase + NETWAVE_EREG_CB + 0);
+ writeb(len & 0xff, ramBase + NETWAVE_EREG_CB + 1);
+ writeb((len>>8) & 0xff, ramBase + NETWAVE_EREG_CB + 2);
+ writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3);
+
+ spin_unlock_irqrestore(&priv->spinlock, flags);
+ return 0;
+}
+
+static netdev_tx_t netwave_start_xmit(struct sk_buff *skb,
+ struct net_device *dev) {
+ /* This flag indicate that the hardware can't perform a transmission.
+ * Theoritically, NET3 check it before sending a packet to the driver,
+ * but in fact it never do that and pool continuously.
+ * As the watchdog will abort too long transmissions, we are quite safe...
+ */
+
+ netif_stop_queue(dev);
+
+ {
+ short length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
+ unsigned char* buf = skb->data;
+
+ if (netwave_hw_xmit( buf, length, dev) == 1) {
+ /* Some error, let's make them call us another time? */
+ netif_start_queue(dev);
+ }
+ dev->trans_start = jiffies;
+ }
+ dev_kfree_skb(skb);
+
+ return NETDEV_TX_OK;
+} /* netwave_start_xmit */
+
+/*
+ * Function netwave_interrupt (irq, dev_id)
+ *
+ * This function is the interrupt handler for the Netwave card. This
+ * routine will be called whenever:
+ * 1. A packet is received.
+ * 2. A packet has successfully been transferred and the unit is
+ * ready to transmit another packet.
+ * 3. A command has completed execution.
+ */
+static irqreturn_t netwave_interrupt(int irq, void* dev_id)
+{
+ unsigned int iobase;
+ u_char __iomem *ramBase;
+ struct net_device *dev = (struct net_device *)dev_id;
+ struct netwave_private *priv = netdev_priv(dev);
+ struct pcmcia_device *link = priv->p_dev;
+ int i;
+
+ if (!netif_device_present(dev))
+ return IRQ_NONE;
+
+ iobase = dev->base_addr;
+ ramBase = priv->ramBase;
+
+ /* Now find what caused the interrupt, check while interrupts ready */
+ for (i = 0; i < 10; i++) {
+ u_char status;
+
+ wait_WOC(iobase);
+ if (!(inb(iobase+NETWAVE_REG_CCSR) & 0x02))
+ break; /* None of the interrupt sources asserted (normal exit) */
+
+ status = inb(iobase + NETWAVE_REG_ASR);
+
+ if (!pcmcia_dev_present(link)) {
+ DEBUG(1, "netwave_interrupt: Interrupt with status 0x%x "
+ "from removed or suspended card!\n", status);
+ break;
+ }
+
+ /* RxRdy */
+ if (status & 0x80) {
+ netwave_rx(dev);
+ /* wait_WOC(iobase); */
+ /* RxRdy cannot be reset directly by the host */
+ }
+ /* RxErr */
+ if (status & 0x40) {
+ u_char rser;
+
+ rser = readb(ramBase + NETWAVE_EREG_RSER);
+
+ if (rser & 0x04) {
+ ++dev->stats.rx_dropped;
+ ++dev->stats.rx_crc_errors;
+ }
+ if (rser & 0x02)
+ ++dev->stats.rx_frame_errors;
+
+ /* Clear the RxErr bit in RSER. RSER+4 is the
+ * write part. Also clear the RxCRC (0x04) and
+ * RxBig (0x02) bits if present */
+ wait_WOC(iobase);
+ writeb(0x40 | (rser & 0x06), ramBase + NETWAVE_EREG_RSER + 4);
+
+ /* Write bit 6 high to ASCC to clear RxErr in ASR,
+ * WOC must be set first!
+ */
+ wait_WOC(iobase);
+ writeb(0x40, ramBase + NETWAVE_EREG_ASCC);
+
+ /* Remember to count up dev->stats on error packets */
+ ++dev->stats.rx_errors;
+ }
+ /* TxDN */
+ if (status & 0x20) {
+ int txStatus;
+
+ txStatus = readb(ramBase + NETWAVE_EREG_TSER);
+ DEBUG(3, "Transmit done. TSER = %x id %x\n",
+ txStatus, readb(ramBase + NETWAVE_EREG_TSER + 1));
+
+ if (txStatus & 0x20) {
+ /* Transmitting was okay, clear bits */
+ wait_WOC(iobase);
+ writeb(0x2f, ramBase + NETWAVE_EREG_TSER + 4);
+ ++dev->stats.tx_packets;
+ }
+
+ if (txStatus & 0xd0) {
+ if (txStatus & 0x80) {
+ ++dev->stats.collisions; /* Because of /proc/net/dev*/
+ /* ++dev->stats.tx_aborted_errors; */
+ /* printk("Collision. %ld\n", jiffies - dev->trans_start); */
+ }
+ if (txStatus & 0x40)
+ ++dev->stats.tx_carrier_errors;
+ /* 0x80 TxGU Transmit giveup - nine times and no luck
+ * 0x40 TxNOAP No access point. Discarded packet.
+ * 0x10 TxErr Transmit error. Always set when
+ * TxGU and TxNOAP is set. (Those are the only ones
+ * to set TxErr).
+ */
+ DEBUG(3, "netwave_interrupt: TxDN with error status %x\n",
+ txStatus);
+
+ /* Clear out TxGU, TxNOAP, TxErr and TxTrys */
+ wait_WOC(iobase);
+ writeb(0xdf & txStatus, ramBase+NETWAVE_EREG_TSER+4);
+ ++dev->stats.tx_errors;
+ }
+ DEBUG(3, "New status is TSER %x ASR %x\n",
+ readb(ramBase + NETWAVE_EREG_TSER),
+ inb(iobase + NETWAVE_REG_ASR));
+
+ netif_wake_queue(dev);
+ }
+ /* TxBA, this would trigger on all error packets received */
+ /* if (status & 0x01) {
+ DEBUG(4, "Transmit buffers available, %x\n", status);
+ }
+ */
+ }
+ /* Handled if we looped at least one time - Jean II */
+ return IRQ_RETVAL(i);
+} /* netwave_interrupt */
+
+/*
+ * Function netwave_watchdog (a)
+ *
+ * Watchdog : when we start a transmission, we set a timer in the
+ * kernel. If the transmission complete, this timer is disabled. If
+ * it expire, we reset the card.
+ *
+ */
+static void netwave_watchdog(struct net_device *dev) {
+
+ DEBUG(1, "%s: netwave_watchdog: watchdog timer expired\n", dev->name);
+ netwave_reset(dev);
+ dev->trans_start = jiffies;
+ netif_wake_queue(dev);
+} /* netwave_watchdog */
+
+static int netwave_rx(struct net_device *dev)
+{
+ netwave_private *priv = netdev_priv(dev);
+ u_char __iomem *ramBase = priv->ramBase;
+ unsigned int iobase = dev->base_addr;
+ u_char rxStatus;
+ struct sk_buff *skb = NULL;
+ unsigned int curBuffer,
+ rcvList;
+ int rcvLen;
+ int tmpcount = 0;
+ int dataCount, dataOffset;
+ int i;
+ u_char *ptr;
+
+ DEBUG(3, "xinw_rx: Receiving ... \n");
+
+ /* Receive max 10 packets for now. */
+ for (i = 0; i < 10; i++) {
+ /* Any packets? */
+ wait_WOC(iobase);
+ rxStatus = readb(ramBase + NETWAVE_EREG_RSER);
+ if ( !( rxStatus & 0x80)) /* No more packets */
+ break;
+
+ /* Check if multicast/broadcast or other */
+ /* multicast = (rxStatus & 0x20); */
+
+ /* The receive list pointer and length of the packet */
+ wait_WOC(iobase);
+ rcvLen = get_int16( ramBase + NETWAVE_EREG_RDP);
+ rcvList = get_uint16( ramBase + NETWAVE_EREG_RDP + 2);
+
+ if (rcvLen < 0) {
+ printk(KERN_DEBUG "netwave_rx: Receive packet with len %d\n",
+ rcvLen);
+ return 0;
+ }
+
+ skb = dev_alloc_skb(rcvLen+5);
+ if (skb == NULL) {
+ DEBUG(1, "netwave_rx: Could not allocate an sk_buff of "
+ "length %d\n", rcvLen);
+ ++dev->stats.rx_dropped;
+ /* Tell the adapter to skip the packet */
+ wait_WOC(iobase);
+ writeb(NETWAVE_CMD_SRP, ramBase + NETWAVE_EREG_CB + 0);
+ writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1);
+ return 0;
+ }
+
+ skb_reserve( skb, 2); /* Align IP on 16 byte */
+ skb_put( skb, rcvLen);
+
+ /* Copy packet fragments to the skb data area */
+ ptr = (u_char*) skb->data;
+ curBuffer = rcvList;
+ tmpcount = 0;
+ while ( tmpcount < rcvLen) {
+ /* Get length and offset of current buffer */
+ dataCount = get_uint16( ramBase+curBuffer+2);
+ dataOffset = get_uint16( ramBase+curBuffer+4);
+
+ copy_from_pc( ptr + tmpcount,
+ ramBase+curBuffer+dataOffset, dataCount);
+
+ tmpcount += dataCount;
+
+ /* Point to next buffer */
+ curBuffer = get_uint16(ramBase + curBuffer);
+ }
+
+ skb->protocol = eth_type_trans(skb,dev);
+ /* Queue packet for network layer */
+ netif_rx(skb);
+
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += rcvLen;
+
+ /* Got the packet, tell the adapter to skip it */
+ wait_WOC(iobase);
+ writeb(NETWAVE_CMD_SRP, ramBase + NETWAVE_EREG_CB + 0);
+ writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1);
+ DEBUG(3, "Packet reception ok\n");
+ }
+ return 0;
+}
+
+static int netwave_open(struct net_device *dev) {
+ netwave_private *priv = netdev_priv(dev);
+ struct pcmcia_device *link = priv->p_dev;
+
+ DEBUG(1, "netwave_open: starting.\n");
+
+ if (!pcmcia_dev_present(link))
+ return -ENODEV;
+
+ link->open++;
+
+ netif_start_queue(dev);
+ netwave_reset(dev);
+
+ return 0;
+}
+
+static int netwave_close(struct net_device *dev) {
+ netwave_private *priv = netdev_priv(dev);
+ struct pcmcia_device *link = priv->p_dev;
+
+ DEBUG(1, "netwave_close: finishing.\n");
+
+ link->open--;
+ netif_stop_queue(dev);
+
+ return 0;
+}
+
+static struct pcmcia_device_id netwave_ids[] = {
+ PCMCIA_DEVICE_PROD_ID12("Xircom", "CreditCard Netwave", 0x2e3ee845, 0x54e28a28),
+ PCMCIA_DEVICE_NULL,
+};
+MODULE_DEVICE_TABLE(pcmcia, netwave_ids);
+
+static struct pcmcia_driver netwave_driver = {
+ .owner = THIS_MODULE,
+ .drv = {
+ .name = "netwave_cs",
+ },
+ .probe = netwave_probe,
+ .remove = netwave_detach,
+ .id_table = netwave_ids,
+ .suspend = netwave_suspend,
+ .resume = netwave_resume,
+};
+
+static int __init init_netwave_cs(void)
+{
+ return pcmcia_register_driver(&netwave_driver);
+}
+
+static void __exit exit_netwave_cs(void)
+{
+ pcmcia_unregister_driver(&netwave_driver);
+}
+
+module_init(init_netwave_cs);
+module_exit(exit_netwave_cs);
+
+/* Set or clear the multicast filter for this adaptor.
+ num_addrs == -1 Promiscuous mode, receive all packets
+ num_addrs == 0 Normal mode, clear multicast list
+ num_addrs > 0 Multicast mode, receive normal and MC packets, and do
+ best-effort filtering.
+ */
+static void set_multicast_list(struct net_device *dev)
+{
+ unsigned int iobase = dev->base_addr;
+ netwave_private *priv = netdev_priv(dev);
+ u_char __iomem * ramBase = priv->ramBase;
+ u_char rcvMode = 0;
+
+#ifdef PCMCIA_DEBUG
+ if (pc_debug > 2) {
+ static int old;
+ if (old != dev->mc_count) {
+ old = dev->mc_count;
+ DEBUG(0, "%s: setting Rx mode to %d addresses.\n",
+ dev->name, dev->mc_count);
+ }
+ }
+#endif
+
+ if (dev->mc_count || (dev->flags & IFF_ALLMULTI)) {
+ /* Multicast Mode */
+ rcvMode = rxConfRxEna + rxConfAMP + rxConfBcast;
+ } else if (dev->flags & IFF_PROMISC) {
+ /* Promiscous mode */
+ rcvMode = rxConfRxEna + rxConfPro + rxConfAMP + rxConfBcast;
+ } else {
+ /* Normal mode */
+ rcvMode = rxConfRxEna + rxConfBcast;
+ }
+
+ /* printk("netwave set_multicast_list: rcvMode to %x\n", rcvMode);*/
+ /* Now set receive mode */
+ wait_WOC(iobase);
+ writeb(NETWAVE_CMD_SRC, ramBase + NETWAVE_EREG_CB + 0);
+ writeb(rcvMode, ramBase + NETWAVE_EREG_CB + 1);
+ writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 2);
+}
+MODULE_LICENSE("GPL");
--
1.6.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists