[ 0.000000] Linux version 2.6.32-rc5 (rm@montag) (gcc version 4.3.4 (Debian 4.3.4-5) ) #110 SMP PREEMPT Sun Oct 25 21:31:29 CET 2009 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-rc5 root=UUID=770e4e60-f57b-4299-a18d-ed558a68d750 ro quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable) [ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d6000 - 00000000000d8000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bd6a1000 (usable) [ 0.000000] BIOS-e820: 00000000bd6a1000 - 00000000bd6a7000 (reserved) [ 0.000000] BIOS-e820: 00000000bd6a7000 - 00000000bd7bd000 (usable) [ 0.000000] BIOS-e820: 00000000bd7bd000 - 00000000bd80f000 (reserved) [ 0.000000] BIOS-e820: 00000000bd80f000 - 00000000bd908000 (usable) [ 0.000000] BIOS-e820: 00000000bd908000 - 00000000bdb0f000 (reserved) [ 0.000000] BIOS-e820: 00000000bdb0f000 - 00000000bdb19000 (usable) [ 0.000000] BIOS-e820: 00000000bdb19000 - 00000000bdb1f000 (reserved) [ 0.000000] BIOS-e820: 00000000bdb1f000 - 00000000bdb64000 (usable) [ 0.000000] BIOS-e820: 00000000bdb64000 - 00000000bdb9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bdb9f000 - 00000000bdc00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bdc00000 - 00000000bde00000 (reserved) [ 0.000000] BIOS-e820: 00000000be000000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbdb64 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0BE000000 mask FFE000000 uncachable [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bdb64000 [ 0.000000] 0000000000 - 00bda00000 page 2M [ 0.000000] 00bda00000 - 00bdb64000 page 4k [ 0.000000] kernel direct mapping tables up to bdb64000 @ 10000-15000 [ 0.000000] RAMDISK: 37c5c000 - 37fef5bd [ 0.000000] ACPI: RSDP 00000000000f7150 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 00000000bdbf700e 00074 (v01 SECCSD LH43STAR 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 00000000bdbe7000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT 00000000bdbe8000 07AE1 (v02 Intel CANTIGA 06040000 INTL 20050624) [ 0.000000] ACPI: FACS 00000000bdb9efc0 00040 [ 0.000000] ACPI: HPET 00000000bdbfed86 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 00000000bdbfedbe 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: APIC 00000000bdbfedfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000bdbfee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC 00000000bdbfee8a 00176 (v01 SECCSD LH43STAR 06040000 LTP 00000000) [ 0.000000] ACPI: SSDT 00000000bdbf70aa 00093 (v01 BrtRef DD01BRT 00001000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bdbe6000 005F9 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bdbe5000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bdbe4000 0020F (v01 PmRef ApTst 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 00bdb64000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 000159bbe4] TEXT DATA BSS ==> [0001000000 - 000159bbe4] [ 0.000000] #3 [0037c5c000 - 0037fef5bd] RAMDISK ==> [0037c5c000 - 0037fef5bd] [ 0.000000] #4 [000009e400 - 0000100000] BIOS reserved ==> [000009e400 - 0000100000] [ 0.000000] #5 [000159c000 - 000159c1e0] BRK ==> [000159c000 - 000159c1e0] [ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] [ 0.000000] found SMP MP-table at [ffff8800000f71f0] f71f0 [ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff880001a00000-ffff8800043fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000bd6a1 [ 0.000000] 0: 0x000bd6a7 -> 0x000bd7bd [ 0.000000] 0: 0x000bd80f -> 0x000bd908 [ 0.000000] 0: 0x000bdb0f -> 0x000bdb19 [ 0.000000] 0: 0x000bdb1f -> 0x000bdb64 [ 0.000000] On node 0 totalpages: 776333 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 103 pages reserved [ 0.000000] DMA zone: 3823 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10568 pages used for memmap [ 0.000000] DMA32 zone: 761783 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d6000 [ 0.000000] PM: Registered nosave memory: 00000000000d6000 - 00000000000d8000 [ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bd6a1000 - 00000000bd6a7000 [ 0.000000] PM: Registered nosave memory: 00000000bd7bd000 - 00000000bd80f000 [ 0.000000] PM: Registered nosave memory: 00000000bd908000 - 00000000bdb0f000 [ 0.000000] PM: Registered nosave memory: 00000000bdb19000 - 00000000bdb1f000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) [ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880001600000 s78552 r8192 d23848 u1048576 [ 0.000000] pcpu-alloc: s78552 r8192 d23848 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 765606 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-rc5 root=UUID=770e4e60-f57b-4299-a18d-ed558a68d750 ro quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 3045620k/3108240k available (2852k kernel code, 2908k absent, 58980k reserved, 1845k data, 408k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:320 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1994.921 MHz processor. [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.84 BogoMIPS (lpj=7979684) [ 0.004054] Security Framework initialized [ 0.004076] Mount-cache hash table entries: 256 [ 0.004210] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004213] CPU: L2 cache: 3072K [ 0.004215] CPU: Physical Processor ID: 0 [ 0.004217] CPU: Processor Core ID: 0 [ 0.004219] mce: CPU supports 6 MCE banks [ 0.004227] CPU0: Thermal monitoring enabled (TM2) [ 0.004230] using mwait in idle threads. [ 0.004232] Performance Events: Core2 events, Intel PMU driver. [ 0.004238] ... version: 2 [ 0.004239] ... bit width: 40 [ 0.004241] ... generic registers: 2 [ 0.004242] ... value mask: 000000ffffffffff [ 0.004244] ... max period: 000000007fffffff [ 0.004246] ... fixed-purpose events: 3 [ 0.004247] ... event mask: 0000000700000003 [ 0.004265] ACPI: Core revision 20090903 [ 0.020063] Setting APIC routing to flat [ 0.020405] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.061893] CPU0: Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz stepping 06 [ 0.064001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] Calibrating delay using timer specific routine.. 3989.98 BogoMIPS (lpj=7979964) [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 3072K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] mce: CPU supports 6 MCE banks [ 0.008000] CPU1: Thermal monitoring enabled (TM2) [ 0.148066] CPU1: Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz stepping 06 [ 0.148074] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.152027] Brought up 2 CPUs [ 0.152029] Total of 2 processors activated (7979.82 BogoMIPS). [ 0.152576] CPU0 attaching sched-domain: [ 0.152579] domain 0: span 0-1 level MC [ 0.152581] groups: 0 1 [ 0.152587] CPU1 attaching sched-domain: [ 0.152589] domain 0: span 0-1 level MC [ 0.152591] groups: 1 0 [ 0.156241] NET: Registered protocol family 16 [ 0.156270] ACPI: bus type pci registered [ 0.156270] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.156270] PCI: MCFG area at e0000000 reserved in E820 [ 0.169427] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.169429] PCI: Using configuration type 1 for base access [ 0.169490] bio: create slab at 0 [ 0.173006] ACPI: EC: Look up EC in DSDT [ 0.177003] ACPI: BIOS _OSI(Linux) query ignored [ 0.180163] ACPI: Interpreter enabled [ 0.180163] ACPI: (supports S0 S3 S4 S5) [ 0.180163] ACPI: Using IOAPIC for interrupt routing [ 0.180251] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 0.188281] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.188281] ACPI: Power Resource [FN00] (off) [ 0.188281] ACPI: Power Resource [FN01] (off) [ 0.188687] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.189298] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.189343] pci 0000:00:02.0: reg 10 64bit mmio: [0xf8000000-0xf83fffff] [ 0.189343] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.189343] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] [ 0.189343] pci 0000:00:02.1: reg 10 64bit mmio: [0xf8400000-0xf84fffff] [ 0.189343] pci 0000:00:19.0: reg 10 32bit mmio: [0xf8600000-0xf861ffff] [ 0.189343] pci 0000:00:19.0: reg 14 32bit mmio: [0xf8624000-0xf8624fff] [ 0.189343] pci 0000:00:19.0: reg 18 io port: [0x1820-0x183f] [ 0.189343] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.189343] pci 0000:00:19.0: PME# disabled [ 0.189343] pci 0000:00:1a.0: reg 20 io port: [0x1840-0x185f] [ 0.189343] pci 0000:00:1a.1: reg 20 io port: [0x1860-0x187f] [ 0.189343] pci 0000:00:1a.2: reg 20 io port: [0x1880-0x189f] [ 0.189343] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf8825800-0xf8825bff] [ 0.192055] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.192061] pci 0000:00:1a.7: PME# disabled [ 0.192120] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf8620000-0xf8623fff] [ 0.192183] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.192188] pci 0000:00:1b.0: PME# disabled [ 0.192282] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.192287] pci 0000:00:1c.0: PME# disabled [ 0.192379] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.192384] pci 0000:00:1c.2: PME# disabled [ 0.192477] pci 0000:00:1d.0: reg 20 io port: [0x18a0-0x18bf] [ 0.192581] pci 0000:00:1d.1: reg 20 io port: [0x18c0-0x18df] [ 0.192671] pci 0000:00:1d.2: reg 20 io port: [0x18e0-0x18ff] [ 0.192767] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8825c00-0xf8825fff] [ 0.192838] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.192843] pci 0000:00:1d.7: PME# disabled [ 0.193101] pci 0000:00:1f.2: reg 10 io port: [0x1818-0x181f] [ 0.193109] pci 0000:00:1f.2: reg 14 io port: [0x180c-0x180f] [ 0.193117] pci 0000:00:1f.2: reg 18 io port: [0x1810-0x1817] [ 0.193126] pci 0000:00:1f.2: reg 1c io port: [0x1808-0x180b] [ 0.193134] pci 0000:00:1f.2: reg 20 io port: [0x1c00-0x1c1f] [ 0.193142] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf8825000-0xf88257ff] [ 0.193191] pci 0000:00:1f.2: PME# supported from D3hot [ 0.193195] pci 0000:00:1f.2: PME# disabled [ 0.193236] pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff] [ 0.193256] pci 0000:00:1f.3: reg 20 io port: [0x1c20-0x1c3f] [ 0.193404] pci 0000:02:00.0: reg 10 64bit mmio: [0xf4000000-0xf4001fff] [ 0.193519] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.193530] pci 0000:02:00.0: PME# disabled [ 0.193613] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] [ 0.193618] pci 0000:00:1c.0: bridge 32bit mmio: [0xf4000000-0xf5ffffff] [ 0.193627] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff] [ 0.193689] pci 0000:00:1c.2: bridge io port: [0x3000-0x3fff] [ 0.193694] pci 0000:00:1c.2: bridge 32bit mmio: [0xf6000000-0xf7ffffff] [ 0.193702] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff] [ 0.193758] pci 0000:06:09.0: reg 10 32bit mmio: [0xf8500000-0xf8500fff] [ 0.193780] pci 0000:06:09.0: supports D1 D2 [ 0.193782] pci 0000:06:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.193787] pci 0000:06:09.0: PME# disabled [ 0.193829] pci 0000:06:09.1: reg 10 32bit mmio: [0xf8501000-0xf85010ff] [ 0.193888] pci 0000:06:09.1: supports D1 D2 [ 0.193890] pci 0000:06:09.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.193895] pci 0000:06:09.1: PME# disabled [ 0.193936] pci 0000:06:09.2: reg 10 32bit mmio: [0xf8501400-0xf85014ff] [ 0.193994] pci 0000:06:09.2: supports D1 D2 [ 0.193996] pci 0000:06:09.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.194001] pci 0000:06:09.2: PME# disabled [ 0.194055] pci 0000:00:1e.0: transparent bridge [ 0.194062] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8500000-0xf85fffff] [ 0.194107] pci_bus 0000:00: on NUMA node 0 [ 0.194114] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.194378] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.194527] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.194620] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.209386] ACPI: PCI Interrupt Link [LNKA] (IRQs *11) [ 0.209386] ACPI: PCI Interrupt Link [LNKB] (IRQs *10) [ 0.209386] ACPI: PCI Interrupt Link [LNKC] (IRQs *5) [ 0.209386] ACPI: PCI Interrupt Link [LNKD] (IRQs *5) [ 0.209386] ACPI: PCI Interrupt Link [LNKE] (IRQs *11) [ 0.209386] ACPI: PCI Interrupt Link [LNKF] (IRQs *10) [ 0.209386] ACPI: PCI Interrupt Link [LNKG] (IRQs *5) [ 0.209386] ACPI: PCI Interrupt Link [LNKH] (IRQs *5) [ 0.209386] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.209386] vgaarb: loaded [ 0.209386] SCSI subsystem initialized [ 0.212024] libata version 3.00 loaded. [ 0.212064] usbcore: registered new interface driver usbfs [ 0.212064] usbcore: registered new interface driver hub [ 0.212064] usbcore: registered new device driver usb [ 0.212073] PCI: Using ACPI for IRQ routing [ 0.212225] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.212225] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.216021] Switching to clocksource tsc [ 0.225285] pnp: PnP ACPI init [ 0.225296] ACPI: bus type pnp registered [ 0.228485] pnp: PnP ACPI: found 12 devices [ 0.228487] ACPI: ACPI bus type pnp unregistered [ 0.228498] system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.228505] system 00:05: ioport range 0x680-0x69f has been reserved [ 0.228508] system 00:05: ioport range 0x480-0x48f has been reserved [ 0.228512] system 00:05: ioport range 0xffff-0xffff has been reserved [ 0.228515] system 00:05: ioport range 0xffff-0xffff has been reserved [ 0.228518] system 00:05: ioport range 0x400-0x47f has been reserved [ 0.228521] system 00:05: ioport range 0x480-0x48f has been reserved [ 0.228524] system 00:05: ioport range 0x1180-0x11ff has been reserved [ 0.228527] system 00:05: ioport range 0x164e-0x164f has been reserved [ 0.228530] system 00:05: ioport range 0x5000-0x500f has been reserved [ 0.228533] system 00:05: ioport range 0xfe00-0xfe00 has been reserved [ 0.228539] system 00:06: ioport range 0x6a0-0x6af has been reserved [ 0.228541] system 00:06: ioport range 0x6b0-0x6ff has been reserved [ 0.228549] system 00:0b: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.228552] system 00:0b: iomem range 0xfed10000-0xfed13fff has been reserved [ 0.228555] system 00:0b: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.228558] system 00:0b: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.228561] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved [ 0.228564] system 00:0b: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.228568] system 00:0b: iomem range 0xfed40000-0xfed44fff has been reserved [ 0.228571] system 00:0b: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.236558] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.236562] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.236569] pci 0000:00:1c.0: MEM window: 0xf4000000-0xf5ffffff [ 0.236574] pci 0000:00:1c.0: PREFETCH window: 0x000000c4000000-0x000000c41fffff [ 0.236582] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 [ 0.236586] pci 0000:00:1c.2: IO window: 0x3000-0x3fff [ 0.236592] pci 0000:00:1c.2: MEM window: 0xc4200000-0xc43fffff [ 0.236597] pci 0000:00:1c.2: PREFETCH window: 0x000000c4400000-0x000000c45fffff [ 0.236608] pci 0000:06:09.0: CardBus bridge, secondary bus 0000:07 [ 0.236610] pci 0000:06:09.0: IO window: 0x004000-0x0040ff [ 0.236615] pci 0000:06:09.0: IO window: 0x004400-0x0044ff [ 0.236620] pci 0000:06:09.0: PREFETCH window: 0xc0000000-0xc3ffffff [ 0.236625] pci 0000:06:09.0: MEM window: 0xc8000000-0xcbffffff [ 0.236630] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 [ 0.236634] pci 0000:00:1e.0: IO window: 0x4000-0x4fff [ 0.236640] pci 0000:00:1e.0: MEM window: 0xf8500000-0xf85fffff [ 0.236645] pci 0000:00:1e.0: PREFETCH window: 0xc0000000-0xc3ffffff [ 0.236660] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.236666] pci 0000:00:1c.0: setting latency timer to 64 [ 0.236676] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.236681] pci 0000:00:1c.2: setting latency timer to 64 [ 0.236689] pci 0000:00:1e.0: setting latency timer to 64 [ 0.236741] pci 0000:06:09.0: power state changed by ACPI to D0 [ 0.236748] pci 0000:06:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.236755] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.236757] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.236760] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] [ 0.236763] pci_bus 0000:02: resource 1 mem: [0xf4000000-0xf5ffffff] [ 0.236765] pci_bus 0000:02: resource 2 pref mem [0xc4000000-0xc41fffff] [ 0.236768] pci_bus 0000:04: resource 0 io: [0x3000-0x3fff] [ 0.236770] pci_bus 0000:04: resource 1 mem: [0xc4200000-0xc43fffff] [ 0.236773] pci_bus 0000:04: resource 2 pref mem [0xc4400000-0xc45fffff] [ 0.236775] pci_bus 0000:06: resource 0 io: [0x4000-0x4fff] [ 0.236778] pci_bus 0000:06: resource 1 mem: [0xf8500000-0xf85fffff] [ 0.236780] pci_bus 0000:06: resource 2 pref mem [0xc0000000-0xc3ffffff] [ 0.236783] pci_bus 0000:06: resource 3 io: [0x00-0xffff] [ 0.236785] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.236788] pci_bus 0000:07: resource 0 io: [0x4000-0x40ff] [ 0.236790] pci_bus 0000:07: resource 1 io: [0x4400-0x44ff] [ 0.236793] pci_bus 0000:07: resource 2 pref mem [0xc0000000-0xc3ffffff] [ 0.236795] pci_bus 0000:07: resource 3 mem: [0xc8000000-0xcbffffff] [ 0.236849] NET: Registered protocol family 2 [ 0.236943] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.237552] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.239380] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.239914] TCP: Hash tables configured (established 262144 bind 65536) [ 0.239917] TCP reno registered [ 0.240067] NET: Registered protocol family 1 [ 0.240090] pci 0000:00:02.0: Boot video device [ 0.240300] Unpacking initramfs... [ 0.324257] Freeing initrd memory: 3661k freed [ 0.325702] Simple Boot Flag at 0x37 set to 0x1 [ 0.326827] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.326951] VFS: Disk quotas dquot_6.5.2 [ 0.326987] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.327090] msgmni has been set to 5957 [ 0.328078] alg: No test for stdrng (krng) [ 0.328132] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.328135] io scheduler noop registered [ 0.328151] io scheduler cfq registered (default) [ 0.328334] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.328346] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.328582] pcieport 0000:00:1c.2: irq 25 for MSI/MSI-X [ 0.328593] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.332002] Linux agpgart interface v0.103 [ 0.332005] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.332152] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.332653] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.332984] ahci 0000:00:1f.2: version 3.0 [ 0.333003] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.333043] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X [ 0.333095] ahci: SSS flag set, parallel bus scan disabled [ 0.333133] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 0.333137] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs [ 0.333143] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.356119] scsi0 : ahci [ 0.356244] scsi1 : ahci [ 0.356336] scsi2 : ahci [ 0.356430] scsi3 : ahci [ 0.356523] scsi4 : ahci [ 0.356617] scsi5 : ahci [ 0.356708] ata1: SATA max UDMA/133 abar m2048@0xf8825000 port 0xf8825100 irq 26 [ 0.356712] ata2: SATA max UDMA/133 abar m2048@0xf8825000 port 0xf8825180 irq 26 [ 0.356714] ata3: DUMMY [ 0.356716] ata4: DUMMY [ 0.356718] ata5: SATA max UDMA/133 abar m2048@0xf8825000 port 0xf8825300 irq 26 [ 0.356722] ata6: SATA max UDMA/133 abar m2048@0xf8825000 port 0xf8825380 irq 26 [ 0.356965] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.359356] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.360788] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.360794] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.360797] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.360801] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.360803] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.360955] mice: PS/2 mouse device common for all mice [ 0.360994] Driver 'rtc_cmos' needs updating - please use bus_type methods [ 0.361128] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.361159] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.361198] cpuidle: using governor ladder [ 0.361200] cpuidle: using governor menu [ 0.361257] oprofile: using NMI interrupt. [ 0.361581] TCP cubic registered [ 0.361584] NET: Registered protocol family 17 [ 0.362229] rtc_cmos 00:07: setting system clock to 2009-10-25 20:33:40 UTC (1256502820) [ 0.429518] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.676007] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.677386] ata1.00: ATA-8: Hitachi HTS543216L9A300, FB2OC40C, max UDMA/133 [ 0.677389] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 0.679058] ata1.00: configured for UDMA/133 [ 0.692179] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54321 FB2O PQ: 0 ANSI: 5 [ 0.692395] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 0.692425] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.692443] sd 0:0:0:0: [sda] Write Protect is off [ 0.692446] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.692470] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.692603] sda: sda1 sda2 sda3 [ 0.728310] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.416019] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.416885] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633A, SC03, max UDMA/100, ATAPI AN [ 1.416900] ata2.00: applying bridge limits [ 1.418312] ata2.00: configured for UDMA/100 [ 1.434456] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633A SC03 PQ: 0 ANSI: 5 [ 1.441238] sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.441241] Uniform CD-ROM driver Revision: 3.20 [ 1.441346] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.441428] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.760017] ata5: SATA link down (SStatus 0 SControl 300) [ 2.096016] ata6: SATA link down (SStatus 0 SControl 300) [ 2.112023] Freeing unused kernel memory: 408k freed [ 2.158260] fan PNP0C0B:00: registered as cooling_device0 [ 2.158267] ACPI: Fan [FAN0] (off) [ 2.158386] fan PNP0C0B:01: registered as cooling_device1 [ 2.158392] ACPI: Fan [FAN1] (off) [ 2.161567] thermal LNXTHERM:01: registered as thermal_zone0 [ 2.161575] ACPI: Thermal Zone [TZ00] (44 C) [ 2.162336] thermal LNXTHERM:02: registered as thermal_zone1 [ 2.162344] ACPI: Thermal Zone [TZ01] (44 C) [ 2.192651] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 2.192740] ACPI: Lid Switch [LID0] [ 2.192793] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 2.192804] ACPI: Power Button [PWRB] [ 2.192853] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 [ 2.192857] ACPI: Sleep Button [SLPB] [ 2.192908] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 2.192912] ACPI: Power Button [PWRF] [ 2.238100] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.238135] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 2.238156] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 2.238160] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 2.238167] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 2.238201] ehci_hcd 0000:00:1a.7: debug port 1 [ 2.277244] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 2.277266] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf8825800 [ 2.278252] uhci_hcd: USB Universal Host Controller Interface driver [ 2.278523] ricoh-mmc: Ricoh MMC Controller disabling driver [ 2.278525] ricoh-mmc: Copyright(c) Philip Langdale [ 2.278545] ricoh-mmc: Ricoh MMC controller found at 0000:06:09.2 [1180:0843] (rev 11) [ 2.278566] ricoh-mmc: Controller is now disabled. [ 2.286544] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 2.286548] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 2.294077] sdhci: Secure Digital Host Controller Interface driver [ 2.294080] sdhci: Copyright(c) Pierre Ossman [ 2.295129] sdhci-pci 0000:06:09.1: SDHCI controller found [1180:0822] (rev 21) [ 2.295213] sdhci-pci 0000:06:09.1: power state changed by ACPI to D0 [ 2.295223] sdhci-pci 0000:06:09.1: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.295248] sdhci-pci 0000:06:09.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 2.295254] sdhci-pci 0000:06:09.1: setting latency timer to 64 [ 2.295298] Registered led device: mmc0:: [ 2.295333] mmc0: SDHCI controller on PCI [0000:06:09.1] using DMA [ 2.300034] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 2.300060] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.300063] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.300065] usb usb1: Product: EHCI Host Controller [ 2.300067] usb usb1: Manufacturer: Linux 2.6.32-rc5 ehci_hcd [ 2.300069] usb usb1: SerialNumber: 0000:00:1a.7 [ 2.300150] usb usb1: configuration #1 chosen from 1 choice [ 2.300186] hub 1-0:1.0: USB hub found [ 2.300194] hub 1-0:1.0: 6 ports detected [ 2.300281] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset [ 2.301290] agpgart-intel 0000:00:00.0: detected 32764K stolen memory [ 2.304491] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 2.304600] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.304610] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 2.304614] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 2.304621] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2 [ 2.304665] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001840 [ 2.304708] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.304711] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.304713] usb usb2: Product: UHCI Host Controller [ 2.304715] usb usb2: Manufacturer: Linux 2.6.32-rc5 uhci_hcd [ 2.304717] usb usb2: SerialNumber: 0000:00:1a.0 [ 2.304767] usb usb2: configuration #1 chosen from 1 choice [ 2.304800] hub 2-0:1.0: USB hub found [ 2.304808] hub 2-0:1.0: 2 ports detected [ 2.304945] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.304953] e1000e 0000:00:19.0: setting latency timer to 64 [ 2.305072] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X [ 2.413269] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:13:77:b0:eb:01 [ 2.413272] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 2.413301] 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: ffffff-0ff [ 2.413334] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.413353] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.413357] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.413364] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3 [ 2.413396] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.417286] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.417304] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8825c00 [ 2.436008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.436030] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.436033] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.436035] usb usb3: Product: EHCI Host Controller [ 2.436039] usb usb3: Manufacturer: Linux 2.6.32-rc5 ehci_hcd [ 2.436041] usb usb3: SerialNumber: 0000:00:1d.7 [ 2.436111] usb usb3: configuration #1 chosen from 1 choice [ 2.436152] hub 3-0:1.0: USB hub found [ 2.436161] hub 3-0:1.0: 6 ports detected [ 2.436283] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.436296] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 2.436302] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 2.436310] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 2.436362] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001860 [ 2.436400] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.436402] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.436405] usb usb4: Product: UHCI Host Controller [ 2.436407] usb usb4: Manufacturer: Linux 2.6.32-rc5 uhci_hcd [ 2.436409] usb usb4: SerialNumber: 0000:00:1a.1 [ 2.436455] usb usb4: configuration #1 chosen from 1 choice [ 2.436482] hub 4-0:1.0: USB hub found [ 2.436488] hub 4-0:1.0: 2 ports detected [ 2.436556] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 2.436563] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 2.436566] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 2.436572] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 2.436598] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001880 [ 2.436632] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.436635] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.436637] usb usb5: Product: UHCI Host Controller [ 2.436639] usb usb5: Manufacturer: Linux 2.6.32-rc5 uhci_hcd [ 2.436641] usb usb5: SerialNumber: 0000:00:1a.2 [ 2.436685] usb usb5: configuration #1 chosen from 1 choice [ 2.436711] hub 5-0:1.0: USB hub found [ 2.436717] hub 5-0:1.0: 2 ports detected [ 2.436782] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.436789] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.436792] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.436797] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 2.436824] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000018a0 [ 2.436858] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.436860] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.436863] usb usb6: Product: UHCI Host Controller [ 2.436865] usb usb6: Manufacturer: Linux 2.6.32-rc5 uhci_hcd [ 2.436867] usb usb6: SerialNumber: 0000:00:1d.0 [ 2.436911] usb usb6: configuration #1 chosen from 1 choice [ 2.436938] hub 6-0:1.0: USB hub found [ 2.436945] hub 6-0:1.0: 2 ports detected [ 2.437016] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.437023] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.437026] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.437033] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 2.437059] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018c0 [ 2.437093] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.437096] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.437098] usb usb7: Product: UHCI Host Controller [ 2.437100] usb usb7: Manufacturer: Linux 2.6.32-rc5 uhci_hcd [ 2.437102] usb usb7: SerialNumber: 0000:00:1d.1 [ 2.437145] usb usb7: configuration #1 chosen from 1 choice [ 2.437173] hub 7-0:1.0: USB hub found [ 2.437179] hub 7-0:1.0: 2 ports detected [ 2.437242] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.437248] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.437252] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.437257] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 2.437283] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0 [ 2.437318] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.437320] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.437323] usb usb8: Product: UHCI Host Controller [ 2.437325] usb usb8: Manufacturer: Linux 2.6.32-rc5 uhci_hcd [ 2.437327] usb usb8: SerialNumber: 0000:00:1d.2 [ 2.437371] usb usb8: configuration #1 chosen from 1 choice [ 2.437398] hub 8-0:1.0: USB hub found [ 2.437404] hub 8-0:1.0: 2 ports detected [ 2.556461] PM: Starting manual resume from disk [ 2.608015] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 2.611735] kjournald starting. Commit interval 5 seconds [ 2.611740] EXT3-fs: mounted filesystem with writeback data mode. [ 3.193518] usb 1-3: New USB device found, idVendor=174f, idProduct=5931 [ 3.193521] usb 1-3: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [ 3.193524] usb 1-3: Product: USB2.0 UVC PC Camera [ 3.193526] usb 1-3: Manufacturer: Syntek [ 3.193528] usb 1-3: SerialNumber: 0001 [ 3.193606] usb 1-3: configuration #1 chosen from 1 choice [ 3.616012] usb 4-2: new full speed USB device using uhci_hcd and address 2 [ 3.779451] usb 4-2: New USB device found, idVendor=08ff, idProduct=1600 [ 3.779454] usb 4-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.779459] usb 4-2: Product: Fingerprint Sensor [ 3.779547] usb 4-2: configuration #1 chosen from 1 choice [ 4.020013] usb 6-2: new low speed USB device using uhci_hcd and address 2 [ 4.160556] udev: starting version 146 [ 4.196929] usb 6-2: New USB device found, idVendor=046d, idProduct=c052 [ 4.196932] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.196938] usb 6-2: Product: USB Laser Mouse [ 4.196940] usb 6-2: Manufacturer: Logitech [ 4.197036] usb 6-2: configuration #1 chosen from 1 choice [ 4.410705] usbcore: registered new interface driver hiddev [ 4.425233] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input5 [ 4.425299] generic-usb 0003:046D:C052.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1d.0-2/input0 [ 4.425322] usbcore: registered new interface driver usbhid [ 4.425325] usbhid: v2.6:USB HID core driver [ 4.501624] ACPI: AC Adapter [ADP1] (on-line) [ 4.542659] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 4.704567] Linux video capture interface: v2.00 [ 4.712238] uvcvideo: Found UVC 1.00 device USB2.0 UVC PC Camera (174f:5931) [ 4.737869] ACPI: SSDT 00000000bdb1aca0 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 4.738605] ACPI: SSDT 00000000bdb19020 00C78 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 4.741450] Monitor-Mwait will be used to enter C-1 state [ 4.741475] Monitor-Mwait will be used to enter C-2 state [ 4.741496] Monitor-Mwait will be used to enter C-3 state [ 4.741504] Marking TSC unstable due to TSC halts in idle [ 4.741528] Switching to clocksource hpet [ 4.742025] processor LNXCPU:00: registered as cooling_device2 [ 4.742539] ACPI: SSDT 00000000bdb1aa20 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 4.742977] ACPI: SSDT 00000000bdb1af20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 4.744889] processor LNXCPU:01: registered as cooling_device3 [ 4.754210] ACPI: Battery Slot [BAT1] (battery present) [ 4.766846] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 4.785415] usbcore: registered new interface driver uvcvideo [ 4.785418] USB Video Class driver (v0.1.0) [ 4.799363] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 4.799369] ACPI: I/O resource 0000:00:1f.3 [0x1c20-0x1c3f] conflicts with ACPI region SMBI [0x1c20-0x1c2f] [ 4.799426] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.868043] yenta_cardbus 0000:06:09.0: CardBus bridge found [144d:c045] [ 4.997835] yenta_cardbus 0000:06:09.0: ISA IRQ mask 0x0cb8, PCI irq 16 [ 4.997839] yenta_cardbus 0000:06:09.0: Socket status: 30000006 [ 4.997843] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a [ 4.997850] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff [ 4.997853] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge Memory window: 0xf8500000 - 0xf85fffff [ 4.997858] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge Memory window: 0xc0000000 - 0xc3ffffff [ 5.502704] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04711/0xa00000 [ 5.537129] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 [ 5.818121] cfg80211: Calling CRDA to update world regulatory domain [ 5.818164] cfg80211: Calling CRDA for country: EU [ 6.250164] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks [ 6.250167] iwlagn: Copyright(c) 2003-2009 Intel Corporation [ 6.250252] iwlagn 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.250282] iwlagn 0000:02:00.0: setting latency timer to 64 [ 6.250334] iwlagn 0000:02:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 [ 6.289758] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 6.289837] iwlagn 0000:02:00.0: irq 28 for MSI/MSI-X [ 6.510397] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 6.602346] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 6.602382] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 6.759051] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 7.752740] Adding 1992052k swap on /dev/sda3. Priority:-1 extents:1 across:1992052k [ 7.871957] EXT3 FS on sda1, internal journal [ 7.996442] loop: module loaded [ 8.684019] kjournald starting. Commit interval 5 seconds [ 8.684291] EXT3 FS on sda2, internal journal [ 8.684296] EXT3-fs: mounted filesystem with writeback data mode. [ 10.284255] fuse init (API version 7.13) [ 10.829320] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X [ 10.885089] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X [ 14.717344] [drm] Initialized drm 1.1.0 20060810 [ 14.886511] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 14.886516] i915 0000:00:02.0: setting latency timer to 64 [ 14.905061] i915 0000:00:02.0: irq 29 for MSI/MSI-X [ 14.905069] [drm] set up 31M of stolen space [ 15.033252] [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-B [ 15.043984] [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-C [ 15.049481] [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-D [ 15.634908] [drm] TV-24: set mode NTSC 480i 0 [ 15.737235] NET: Registered protocol family 10 [ 15.737802] lo: Disabled Privacy Extensions [ 15.738320] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.778450] fb0: inteldrmfb frame buffer device [ 15.778453] registered panic notifier [ 15.779968] ACPI Warning: _BQC returned an invalid level (20090903/video-631) [ 15.780919] acpi device:08: registered as cooling_device4 [ 15.781447] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9 [ 15.781515] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 15.782710] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 15.950348] Console: switching to colour frame buffer device 160x50 [ 16.050993] [drm] LVDS-8: set mode 1280x800 27 [ 16.645944] [drm] TV-24: set mode NTSC 480i 0 [ 16.826112] [drm] TV-24: set mode NTSC 480i 0 [ 17.278384] [drm] TV-24: set mode NTSC 480i 0 [ 17.458543] [drm] TV-24: set mode NTSC 480i 0 [ 24.866809] iwlagn 0000:02:00.0: firmware: requesting iwlwifi-5000-2.ucode [ 24.927609] iwlagn 0000:02:00.0: loaded firmware version 8.24.2.12 [ 25.079467] Registered led device: iwl-phy0::radio [ 25.079826] Registered led device: iwl-phy0::assoc [ 25.080192] Registered led device: iwl-phy0::RX [ 25.080499] Registered led device: iwl-phy0::TX [ 25.098415] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 39.154034] [drm] TV-24: set mode NTSC 480i 0 [ 39.295623] [drm] TV-24: set mode NTSC 480i 0 [ 53.506733] [drm] TV-24: set mode NTSC 480i 0 [ 53.648346] [drm] TV-24: set mode NTSC 480i 0 [ 62.415446] wlan0: deauthenticating from 00:01:e3:ad:f6:b8 by local choice (reason=3) [ 62.415600] wlan0: direct probe to AP 00:01:e3:ad:f6:b8 (try 1) [ 62.420498] wlan0: direct probe responded [ 62.420506] wlan0: authenticate with AP 00:01:e3:ad:f6:b8 (try 1) [ 62.422524] wlan0: authenticated [ 62.422557] wlan0: associate with AP 00:01:e3:ad:f6:b8 (try 1) [ 62.426377] wlan0: RX AssocResp from 00:01:e3:ad:f6:b8 (capab=0x431 status=0 aid=1) [ 62.426384] wlan0: associated [ 62.433440] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 72.804042] wlan0: no IPv6 routers present [ 98.972153] Monitor-Mwait will be used to enter C-3 state