| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20091023-patch-gigaset-01.tilman@imap.cc>
Date: Sun, 25 Oct 2009 20:29:37 +0100 (CET)
From: Tilman Schmidt <tilman@...p.cc>
To: David Miller <davem@...emloft.net>,
Karsten Keil <isdn@...ux-pingi.de>
CC: Hansjoerg Lipp <hjlipp@....de>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, isdn4linux@...tserv.isdn4linux.de,
i4ldeveloper@...tserv.isdn4linux.de
Subject: [PATCH 1/9] gigaset: CAPI module readability improvements
Replace the "ignoring Additional Info" warning message by better
readable ones citing the specific subparameters being ignored.
Make parts of the code more readable by using a local cmsg
pointer variable.
Impact: readability improvement
Signed-off-by: Tilman Schmidt <tilman@...p.cc>
---
drivers/isdn/gigaset/capi.c | 144 ++++++++++++++++++++++++-------------------
1 files changed, 81 insertions(+), 63 deletions(-)
diff --git a/drivers/isdn/gigaset/capi.c b/drivers/isdn/gigaset/capi.c
index c276a92..ac0a2da 100644
--- a/drivers/isdn/gigaset/capi.c
+++ b/drivers/isdn/gigaset/capi.c
@@ -168,14 +168,6 @@ static inline void ignore_cstruct_param(struct cardstate *cs, _cstruct param,
msgname, paramname);
}
-static inline void ignore_cmstruct_param(struct cardstate *cs, _cmstruct param,
- char *msgname, char *paramname)
-{
- if (param != CAPI_DEFAULT)
- dev_warn(cs->dev, "%s: ignoring unsupported parameter: %s\n",
- msgname, paramname);
-}
-
/*
* check for legal hex digit
*/
@@ -1062,6 +1054,7 @@ static void do_facility_req(struct gigaset_capi_ctr *iif,
struct sk_buff *skb)
{
struct cardstate *cs = iif->ctr.driverdata;
+ _cmsg *cmsg = &iif->acmsg;
struct sk_buff *cskb;
u8 *pparam;
unsigned int msgsize = CAPI_FACILITY_CONF_BASELEN;
@@ -1069,14 +1062,14 @@ static void do_facility_req(struct gigaset_capi_ctr *iif,
static u8 confparam[10]; /* max. 9 octets + length byte */
/* decode message */
- capi_message2cmsg(&iif->acmsg, skb->data);
- dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
+ capi_message2cmsg(cmsg, skb->data);
+ dump_cmsg(DEBUG_CMD, __func__, cmsg);
/*
* Facility Request Parameter is not decoded by capi_message2cmsg()
* encoding depends on Facility Selector
*/
- switch (iif->acmsg.FacilitySelector) {
+ switch (cmsg->FacilitySelector) {
case CAPI_FACILITY_DTMF: /* ToDo */
info = CapiFacilityNotSupported;
confparam[0] = 2; /* length */
@@ -1093,7 +1086,7 @@ static void do_facility_req(struct gigaset_capi_ctr *iif,
case CAPI_FACILITY_SUPPSVC:
/* decode Function parameter */
- pparam = iif->acmsg.FacilityRequestParameter;
+ pparam = cmsg->FacilityRequestParameter;
if (pparam == NULL || *pparam < 2) {
dev_notice(cs->dev, "%s: %s missing\n", "FACILITY_REQ",
"Facility Request Parameter");
@@ -1141,18 +1134,18 @@ static void do_facility_req(struct gigaset_capi_ctr *iif,
}
/* send FACILITY_CONF with given Info and confirmation parameter */
- capi_cmsg_answer(&iif->acmsg);
- iif->acmsg.Info = info;
- iif->acmsg.FacilityConfirmationParameter = confparam;
+ capi_cmsg_answer(cmsg);
+ cmsg->Info = info;
+ cmsg->FacilityConfirmationParameter = confparam;
msgsize += confparam[0]; /* length */
cskb = alloc_skb(msgsize, GFP_ATOMIC);
if (!cskb) {
dev_err(cs->dev, "%s: out of memory\n", __func__);
return;
}
- capi_cmsg2message(&iif->acmsg, __skb_put(cskb, msgsize));
- dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
- capi_ctr_handle_message(&iif->ctr, ap->id, cskb);
+ capi_cmsg2message(cmsg, __skb_put(cskb, msgsize));
+ dump_cmsg(DEBUG_CMD, __func__, cmsg);
+ capi_ctr_handle_message(&iif->ctr, ap->id, cskb);
}
@@ -1207,8 +1200,8 @@ static void do_connect_req(struct gigaset_capi_ctr *iif,
u16 info;
/* decode message */
- capi_message2cmsg(&iif->acmsg, skb->data);
- dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
+ capi_message2cmsg(cmsg, skb->data);
+ dump_cmsg(DEBUG_CMD, __func__, cmsg);
/* get free B channel & construct PLCI */
bcs = gigaset_get_free_channel(cs);
@@ -1411,8 +1404,16 @@ static void do_connect_req(struct gigaset_capi_ctr *iif,
"CONNECT_REQ", "Calling pty subaddr");
ignore_cstruct_param(cs, cmsg->LLC,
"CONNECT_REQ", "LLC");
- ignore_cmstruct_param(cs, cmsg->AdditionalInfo,
- "CONNECT_REQ", "Additional Info");
+ if (cmsg->AdditionalInfo != CAPI_DEFAULT) {
+ ignore_cstruct_param(cs, cmsg->BChannelinformation,
+ "CONNECT_REQ", "B Channel Information");
+ ignore_cstruct_param(cs, cmsg->Keypadfacility,
+ "CONNECT_REQ", "Keypad Facility");
+ ignore_cstruct_param(cs, cmsg->Useruserdata,
+ "CONNECT_REQ", "User-User Data");
+ ignore_cstruct_param(cs, cmsg->Facilitydataarray,
+ "CONNECT_REQ", "Facility Data Array");
+ }
/* encode parameter: B channel to use */
commands[AT_ISO] = kmalloc(9, GFP_KERNEL);
@@ -1458,8 +1459,8 @@ static void do_connect_resp(struct gigaset_capi_ctr *iif,
int channel;
/* decode message */
- capi_message2cmsg(&iif->acmsg, skb->data);
- dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
+ capi_message2cmsg(cmsg, skb->data);
+ dump_cmsg(DEBUG_CMD, __func__, cmsg);
dev_kfree_skb(skb);
/* extract and check channel number from PLCI */
@@ -1524,8 +1525,16 @@ static void do_connect_resp(struct gigaset_capi_ctr *iif,
"CONNECT_RESP", "Connected Subaddress");
ignore_cstruct_param(cs, cmsg->LLC,
"CONNECT_RESP", "LLC");
- ignore_cmstruct_param(cs, cmsg->AdditionalInfo,
- "CONNECT_RESP", "Additional Info");
+ if (cmsg->AdditionalInfo != CAPI_DEFAULT) {
+ ignore_cstruct_param(cs, cmsg->BChannelinformation,
+ "CONNECT_RESP", "BChannel Information");
+ ignore_cstruct_param(cs, cmsg->Keypadfacility,
+ "CONNECT_RESP", "Keypad Facility");
+ ignore_cstruct_param(cs, cmsg->Useruserdata,
+ "CONNECT_RESP", "User-User Data");
+ ignore_cstruct_param(cs, cmsg->Facilitydataarray,
+ "CONNECT_RESP", "Facility Data Array");
+ }
/* Accept call */
if (!gigaset_add_event(cs, &cs->bcs[channel-1].at_state,
@@ -1587,17 +1596,18 @@ static void do_connect_b3_req(struct gigaset_capi_ctr *iif,
struct sk_buff *skb)
{
struct cardstate *cs = iif->ctr.driverdata;
+ _cmsg *cmsg = &iif->acmsg;
int channel;
/* decode message */
- capi_message2cmsg(&iif->acmsg, skb->data);
- dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
+ capi_message2cmsg(cmsg, skb->data);
+ dump_cmsg(DEBUG_CMD, __func__, cmsg);
/* extract and check channel number from PLCI */
- channel = (iif->acmsg.adr.adrPLCI >> 8) & 0xff;
+ channel = (cmsg->adr.adrPLCI >> 8) & 0xff;
if (!channel || channel > cs->channels) {
dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
- "CONNECT_B3_REQ", "PLCI", iif->acmsg.adr.adrPLCI);
+ "CONNECT_B3_REQ", "PLCI", cmsg->adr.adrPLCI);
send_conf(iif, ap, skb, CapiIllContrPlciNcci);
return;
}
@@ -1606,14 +1616,12 @@ static void do_connect_b3_req(struct gigaset_capi_ctr *iif,
ap->connected = APCONN_ACTIVE;
/* build NCCI: always 1 (one B3 connection only) */
- iif->acmsg.adr.adrNCCI |= 1 << 16;
+ cmsg->adr.adrNCCI |= 1 << 16;
/* NCPI parameter: not applicable for B3 Transparent */
- ignore_cstruct_param(cs, iif->acmsg.NCPI,
- "CONNECT_B3_REQ", "NCPI");
- send_conf(iif, ap, skb,
- (iif->acmsg.NCPI && iif->acmsg.NCPI[0]) ?
- CapiNcpiNotSupportedByProtocol : CapiSuccess);
+ ignore_cstruct_param(cs, cmsg->NCPI, "CONNECT_B3_REQ", "NCPI");
+ send_conf(iif, ap, skb, (cmsg->NCPI && cmsg->NCPI[0]) ?
+ CapiNcpiNotSupportedByProtocol : CapiSuccess);
}
/*
@@ -1628,27 +1636,28 @@ static void do_connect_b3_resp(struct gigaset_capi_ctr *iif,
struct sk_buff *skb)
{
struct cardstate *cs = iif->ctr.driverdata;
- struct bc_state *bcs = NULL;
+ _cmsg *cmsg = &iif->acmsg;
+ struct bc_state *bcs;
int channel;
unsigned int msgsize;
u8 command;
/* decode message */
- capi_message2cmsg(&iif->acmsg, skb->data);
- dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
+ capi_message2cmsg(cmsg, skb->data);
+ dump_cmsg(DEBUG_CMD, __func__, cmsg);
/* extract and check channel number and NCCI */
- channel = (iif->acmsg.adr.adrNCCI >> 8) & 0xff;
+ channel = (cmsg->adr.adrNCCI >> 8) & 0xff;
if (!channel || channel > cs->channels ||
- ((iif->acmsg.adr.adrNCCI >> 16) & 0xffff) != 1) {
+ ((cmsg->adr.adrNCCI >> 16) & 0xffff) != 1) {
dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
- "CONNECT_B3_RESP", "NCCI", iif->acmsg.adr.adrNCCI);
+ "CONNECT_B3_RESP", "NCCI", cmsg->adr.adrNCCI);
dev_kfree_skb(skb);
return;
}
bcs = &cs->bcs[channel-1];
- if (iif->acmsg.Reject) {
+ if (cmsg->Reject) {
/* Reject: clear B3 connect received flag */
ap->connected = APCONN_SETUP;
@@ -1673,11 +1682,11 @@ static void do_connect_b3_resp(struct gigaset_capi_ctr *iif,
command = CAPI_CONNECT_B3_ACTIVE;
msgsize = CAPI_CONNECT_B3_ACTIVE_IND_BASELEN;
}
- capi_cmsg_header(&iif->acmsg, ap->id, command, CAPI_IND,
- ap->nextMessageNumber++, iif->acmsg.adr.adrNCCI);
+ capi_cmsg_header(cmsg, ap->id, command, CAPI_IND,
+ ap->nextMessageNumber++, cmsg->adr.adrNCCI);
__skb_trim(skb, msgsize);
- capi_cmsg2message(&iif->acmsg, skb->data);
- dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
+ capi_cmsg2message(cmsg, skb->data);
+ dump_cmsg(DEBUG_CMD, __func__, cmsg);
capi_ctr_handle_message(&iif->ctr, ap->id, skb);
}
@@ -1691,28 +1700,37 @@ static void do_disconnect_req(struct gigaset_capi_ctr *iif,
struct sk_buff *skb)
{
struct cardstate *cs = iif->ctr.driverdata;
+ _cmsg *cmsg = &iif->acmsg;
struct bc_state *bcs;
_cmsg *b3cmsg;
struct sk_buff *b3skb;
int channel;
/* decode message */
- capi_message2cmsg(&iif->acmsg, skb->data);
- dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
+ capi_message2cmsg(cmsg, skb->data);
+ dump_cmsg(DEBUG_CMD, __func__, cmsg);
/* extract and check channel number from PLCI */
- channel = (iif->acmsg.adr.adrPLCI >> 8) & 0xff;
+ channel = (cmsg->adr.adrPLCI >> 8) & 0xff;
if (!channel || channel > cs->channels) {
dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
- "DISCONNECT_REQ", "PLCI", iif->acmsg.adr.adrPLCI);
+ "DISCONNECT_REQ", "PLCI", cmsg->adr.adrPLCI);
send_conf(iif, ap, skb, CapiIllContrPlciNcci);
return;
}
bcs = cs->bcs + channel - 1;
/* ToDo: process parameter: Additional info */
- ignore_cmstruct_param(cs, iif->acmsg.AdditionalInfo,
- "DISCONNECT_REQ", "Additional Info");
+ if (cmsg->AdditionalInfo != CAPI_DEFAULT) {
+ ignore_cstruct_param(cs, cmsg->BChannelinformation,
+ "DISCONNECT_REQ", "B Channel Information");
+ ignore_cstruct_param(cs, cmsg->Keypadfacility,
+ "DISCONNECT_REQ", "Keypad Facility");
+ ignore_cstruct_param(cs, cmsg->Useruserdata,
+ "DISCONNECT_REQ", "User-User Data");
+ ignore_cstruct_param(cs, cmsg->Facilitydataarray,
+ "DISCONNECT_REQ", "Facility Data Array");
+ }
/* skip if DISCONNECT_IND already sent */
if (!ap->connected)
@@ -1733,7 +1751,7 @@ static void do_disconnect_req(struct gigaset_capi_ctr *iif,
}
capi_cmsg_header(b3cmsg, ap->id, CAPI_DISCONNECT_B3, CAPI_IND,
ap->nextMessageNumber++,
- iif->acmsg.adr.adrPLCI | (1 << 16));
+ cmsg->adr.adrPLCI | (1 << 16));
b3cmsg->Reason_B3 = CapiProtocolErrorLayer1;
b3skb = alloc_skb(CAPI_DISCONNECT_B3_IND_BASELEN, GFP_KERNEL);
if (b3skb == NULL) {
@@ -1769,18 +1787,19 @@ static void do_disconnect_b3_req(struct gigaset_capi_ctr *iif,
struct sk_buff *skb)
{
struct cardstate *cs = iif->ctr.driverdata;
+ _cmsg *cmsg = &iif->acmsg;
int channel;
/* decode message */
- capi_message2cmsg(&iif->acmsg, skb->data);
- dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
+ capi_message2cmsg(cmsg, skb->data);
+ dump_cmsg(DEBUG_CMD, __func__, cmsg);
/* extract and check channel number and NCCI */
- channel = (iif->acmsg.adr.adrNCCI >> 8) & 0xff;
+ channel = (cmsg->adr.adrNCCI >> 8) & 0xff;
if (!channel || channel > cs->channels ||
- ((iif->acmsg.adr.adrNCCI >> 16) & 0xffff) != 1) {
+ ((cmsg->adr.adrNCCI >> 16) & 0xffff) != 1) {
dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
- "DISCONNECT_B3_REQ", "NCCI", iif->acmsg.adr.adrNCCI);
+ "DISCONNECT_B3_REQ", "NCCI", cmsg->adr.adrNCCI);
send_conf(iif, ap, skb, CapiIllContrPlciNcci);
return;
}
@@ -1803,11 +1822,10 @@ static void do_disconnect_b3_req(struct gigaset_capi_ctr *iif,
gigaset_schedule_event(cs);
/* NCPI parameter: not applicable for B3 Transparent */
- ignore_cstruct_param(cs, iif->acmsg.NCPI,
+ ignore_cstruct_param(cs, cmsg->NCPI,
"DISCONNECT_B3_REQ", "NCPI");
- send_conf(iif, ap, skb,
- (iif->acmsg.NCPI && iif->acmsg.NCPI[0]) ?
- CapiNcpiNotSupportedByProtocol : CapiSuccess);
+ send_conf(iif, ap, skb, (cmsg->NCPI && cmsg->NCPI[0]) ?
+ CapiNcpiNotSupportedByProtocol : CapiSuccess);
}
/*
--
1.6.2.1.214.ge986c
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists