Linux version 2.6.32-rc6 (root@hadburg) (gcc version 4.4.1 (Gentoo 4.4.1 p1.0) ) #8 SMP Fri Nov 6 19:54:37 CET 2009 Command line: root=/dev/sda2 video=radeonfb:noaccel console=uart,io,0xe800,115200 console=tty0 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cffc0000 (usable) BIOS-e820: 00000000cffc0000 - 00000000cffce000 (ACPI data) BIOS-e820: 00000000cffce000 - 00000000cfff0000 (ACPI NVS) BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) Early serial console at I/O port 0xe800 (options '115200') bootconsole [uart0] enabled DMI present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x130000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000000 mask FFFF80000000 write-back 1 base 000080000000 mask FFFFC0000000 write-back 2 base 0000C0000000 mask FFFFF0000000 write-back 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000000130000000 aka 4864M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xcffc0 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 Using GB pages for direct mapping init_memory_mapping: 0000000000000000-00000000cffc0000 0000000000 - 00c0000000 page 1G 00c0000000 - 00cfe00000 page 2M 00cfe00000 - 00cffc0000 page 4k kernel direct mapping tables up to cffc0000 @ 10000-13000 init_memory_mapping: 0000000100000000-0000000130000000 0100000000 - 0130000000 page 2M kernel direct mapping tables up to 130000000 @ 12000-14000 ACPI: RSDP 00000000000f97e0 00024 (v02 ACPIAM) ACPI: XSDT 00000000cffc0100 00054 (v01 043008 XSDT0025 20080430 MSFT 00000097) ACPI: FACP 00000000cffc0290 000F4 (v03 043008 FACP0025 20080430 MSFT 00000097) ACPI: DSDT 00000000cffc0440 0833A (v01 MMKA0 MMKA05-3 00000000 INTL 20051117) ACPI: FACS 00000000cffce000 00040 ACPI: APIC 00000000cffc0390 0006C (v01 043008 APIC0025 20080430 MSFT 00000097) ACPI: GFCM 00000000cffc0400 0003C (v01 043008 OEMMCFG 20080430 MSFT 00000097) ACPI: OEMB 00000000cffce040 00071 (v01 043008 OEMB0025 20080430 MSFT 00000097) ACPI: HPET 00000000cffc8780 00038 (v01 043008 OEMHPET 20080430 MSFT 00000097) ACPI: SSDT 00000000cffc87c0 00544 (v01 A M I POWERNOW 00000001 AMD 00000001) ACPI: Local APIC address 0xfee00000 Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-0000000130000000 Bootmem setup node 0 0000000000000000-0000000130000000 NODE_DATA [0000000000013000 - 0000000000016fff] bootmap [0000000000017000 - 000000000003cfff] pages 26 (7 early reservations) ==> bootmem [0000000000 - 0130000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 000175d184] TEXT DATA BSS ==> [0001000000 - 000175d184] #3 [000008d400 - 0000100000] BIOS reserved ==> [000008d400 - 0000100000] #4 [000175e000 - 000175e1d5] BRK ==> [000175e000 - 000175e1d5] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] #6 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000] found SMP MP-table at [ffff8800000ff780] ff780 [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00130000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000cffc0 0: 0x00100000 -> 0x00130000 On node 0 totalpages: 1048399 DMA zone: 56 pages used for memmap DMA zone: 120 pages reserved DMA zone: 3807 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833528 pages, LIFO batch:31 Normal zone: 2688 pages used for memmap Normal zone: 193920 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8300 base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 Allocating PCI resources starting at d0000000 (gap: d0000000:10000000) NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff880028200000 s73432 r8192 d20776 u524288 pcpu-alloc: s73432 r8192 d20776 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031255 Policy zone: Normal Kernel command line: root=/dev/sda2 video=radeonfb:noaccel console=uart,io,0xe800,115200 console=tty0 PID hash table entries: 4096 (order: 3, 32768 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Node 0: aperture @ 20000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 Memory: 4060412k/4980736k available (3779k kernel code, 787140k absent, 133184k reserved, 2706k data, 516k init) Hierarchical RCU implementation. NR_IRQS:384 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled, bootconsole disabled hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer Fast TSC calibration failed TSC: Unable to calibrate against PIT TSC: using HPET reference calibration Detected 2283.669 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4599.80 BogoMIPS (lpj=2299900) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0x0 -> Node 0 tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks using C1E aware idle routine Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f ACPI: Core revision 20090903 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Phenom(tm) 9650 Quad-Core Processor stepping 03 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4600.09 BogoMIPS (lpj=2300048) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: AMD Phenom(tm) 9650 Quad-Core Processor stepping 03 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2 APIC 0x2 ip 0x6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 4599.97 BogoMIPS (lpj=2299989) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 2/0x2 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU2: AMD Phenom(tm) 9650 Quad-Core Processor stepping 03 checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3 APIC 0x3 ip 0x6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 4600.00 BogoMIPS (lpj=2300004) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 3/0x3 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU3: AMD Phenom(tm) 9650 Quad-Core Processor stepping 03 checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs Total of 4 processors activated (18399.88 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-3 level MC groups: 0 1 2 3 CPU1 attaching sched-domain: domain 0: span 0-3 level MC groups: 1 2 3 0 CPU2 attaching sched-domain: domain 0: span 0-3 level MC groups: 2 3 0 1 CPU3 attaching sched-domain: domain 0: span 0-3 level MC groups: 3 0 1 2 NET: Registered protocol family 16 i2c-core: driver [dummy] registered node 0 link 0: io port [1000, ffffff] TOM: 00000000d0000000 aka 3328M Fam 10h mmconf [e0000000, efffffff] node 0 link 0: mmio [e0000000, efffffff] ==> none node 0 link 0: mmio [f0000000, ffffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [d0000000, dfffffff] TOM2: 0000000130000000 aka 4864M bus: [00,07] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [f0000000, ffffffff] bus: 00 index 2 mmio: [a0000, bffff] bus: 00 index 3 mmio: [d0000000, dfffffff] bus: 00 index 4 mmio: [130000000, fcffffffff] ACPI: bus type pci registered PCI: Using configuration type 1 for base access PCI: Using configuration type 1 for extended access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 3 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI Warning: Incorrect checksum in table [OEMB] - FF, should be F6 (20090903/tbutils-314) ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff] pci 0000:00:12.0: reg 10 io port: [0x9000-0x9007] pci 0000:00:12.0: reg 14 io port: [0x8000-0x8003] pci 0000:00:12.0: reg 18 io port: [0x7000-0x7007] pci 0000:00:12.0: reg 1c io port: [0x6000-0x6003] pci 0000:00:12.0: reg 20 io port: [0x5000-0x500f] pci 0000:00:12.0: reg 24 32bit mmio: [0xfe8ff800-0xfe8ffbff] pci 0000:00:12.0: set SATA to AHCI mode pci 0000:00:13.0: reg 10 32bit mmio: [0xfe8fe000-0xfe8fefff] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe8fd000-0xfe8fdfff] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe8fc000-0xfe8fcfff] pci 0000:00:13.3: reg 10 32bit mmio: [0xfe8fb000-0xfe8fbfff] pci 0000:00:13.4: reg 10 32bit mmio: [0xfe8fa000-0xfe8fafff] pci 0000:00:13.5: reg 10 32bit mmio: [0xfe8ff000-0xfe8ff0ff] pci 0000:00:13.5: supports D1 D2 pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.5: PME# disabled pci 0000:00:14.0: reg 10 io port: [0xb00-0xb0f] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe8f4000-0xfe8f7fff] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled pci 0000:01:00.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:01:00.0: reg 14 io port: [0xa000-0xa0ff] pci 0000:01:00.0: reg 18 32bit mmio: [0xfe9f0000-0xfe9fffff] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfe9c0000-0xfe9dffff] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10 32bit mmio: [0xfe9e0000-0xfe9effff] pci 0000:01:00.1: supports D1 D2 pci 0000:00:02.0: bridge io port: [0xa000-0xafff] pci 0000:00:02.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:02:00.0: reg 24 32bit mmio: [0xfeafe000-0xfeafffff] pci 0000:02:00.0: PME# supported from D3hot pci 0000:02:00.0: PME# disabled pci 0000:02:00.1: reg 10 io port: [0xc800-0xc807] pci 0000:02:00.1: reg 14 io port: [0xc400-0xc403] pci 0000:02:00.1: reg 18 io port: [0xc000-0xc007] pci 0000:02:00.1: reg 1c io port: [0xb800-0xb803] pci 0000:02:00.1: reg 20 io port: [0xb400-0xb40f] pci 0000:00:09.0: bridge io port: [0xb000-0xcfff] pci 0000:00:09.0: bridge 32bit mmio: [0xfea00000-0xfeafffff] pci 0000:03:00.0: reg 10 64bit mmio: [0xfebfc000-0xfebfffff] pci 0000:03:00.0: reg 18 io port: [0xd800-0xd8ff] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfebc0000-0xfebdffff] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:0a.0: bridge io port: [0xd000-0xdfff] pci 0000:00:0a.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff] pci 0000:04:05.0: reg 10 io port: [0xe800-0xe81f] pci 0000:00:14.4: transparent bridge pci 0000:00:14.4: bridge io port: [0xe000-0xefff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff] pci 0000:00:00.0: BAR 3: can't allocate resource hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 32-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:0d: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp 00:0d: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp 00:0d: mem resource (0x100000-0xcfffffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:08: ioport range 0xe00-0xe0f has been reserved system 00:08: ioport range 0xe80-0xe8f has been reserved system 00:08: ioport range 0xf40-0xf4f has been reserved system 00:08: ioport range 0xa30-0xa3f has been reserved system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0b: ioport range 0x4d0-0x4d1 has been reserved system 00:0b: ioport range 0x40b-0x40b has been reserved system 00:0b: ioport range 0x4d6-0x4d6 has been reserved system 00:0b: ioport range 0xc00-0xc01 has been reserved system 00:0b: ioport range 0xc14-0xc14 has been reserved system 00:0b: ioport range 0xc50-0xc51 has been reserved system 00:0b: ioport range 0xc52-0xc52 has been reserved system 00:0b: ioport range 0xc6c-0xc6c has been reserved system 00:0b: ioport range 0xc6f-0xc6f has been reserved system 00:0b: ioport range 0xcd0-0xcd1 has been reserved system 00:0b: ioport range 0xcd2-0xcd3 has been reserved system 00:0b: ioport range 0xcd4-0xcd5 has been reserved system 00:0b: ioport range 0xcd6-0xcd7 has been reserved system 00:0b: ioport range 0xcd8-0xcdf has been reserved system 00:0b: ioport range 0x800-0x89f has been reserved system 00:0b: ioport range 0xb10-0xb1f has been reserved system 00:0b: ioport range 0x900-0x90f has been reserved system 00:0b: ioport range 0x910-0x91f has been reserved system 00:0b: ioport range 0xfe00-0xfefe has been reserved system 00:0b: iomem range 0xffb80000-0xffbfffff has been reserved system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved system 00:0d: iomem range 0xfec00000-0x10d7fffff could not be reserved pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 pci 0000:00:02.0: IO window: 0xa000-0xafff pci 0000:00:02.0: MEM window: 0xfe900000-0xfe9fffff pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:09.0: PCI bridge, secondary bus 0000:02 pci 0000:00:09.0: IO window: 0xb000-0xcfff pci 0000:00:09.0: MEM window: 0xfea00000-0xfeafffff pci 0000:00:09.0: PREFETCH window: disabled pci 0000:00:0a.0: PCI bridge, secondary bus 0000:03 pci 0000:00:0a.0: IO window: 0xd000-0xdfff pci 0000:00:0a.0: MEM window: 0xfeb00000-0xfebfffff pci 0000:00:0a.0: PREFETCH window: disabled pci 0000:00:14.4: PCI bridge, secondary bus 0000:04 pci 0000:00:14.4: IO window: 0xe000-0xefff pci 0000:00:14.4: MEM window: disabled pci 0000:00:14.4: PREFETCH window: disabled pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:09.0: setting latency timer to 64 pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:0a.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0xa000-0xafff] pci_bus 0000:01: resource 1 mem: [0xfe900000-0xfe9fffff] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] pci_bus 0000:02: resource 0 io: [0xb000-0xcfff] pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff] pci_bus 0000:04: resource 0 io: [0xe000-0xefff] pci_bus 0000:04: resource 3 io: [0x00-0xffff] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:01:00.0: Boot video device PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 20000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture HugeTLB registered 2 MB page size, pre-allocated 0 pages Slow work thread pool: Starting up Slow work thread pool: Ready msgmni has been set to 7930 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:02.0: irq 24 for MSI/MSI-X pcieport 0000:00:02.0: setting latency timer to 64 pcieport 0000:00:09.0: irq 25 for MSI/MSI-X pcieport 0000:00:09.0: setting latency timer to 64 pcieport 0000:00:0a.0: irq 26 for MSI/MSI-X pcieport 0000:00:0a.0: setting latency timer to 64 input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] processor LNXCPU:00: registered as cooling_device0 processor LNXCPU:01: registered as cooling_device1 processor LNXCPU:02: registered as cooling_device2 processor LNXCPU:03: registered as cooling_device3 Real Time Clock Driver v1.12b Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial 0000:04:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 0000:04:05.0: ttyS1 at I/O 0xe800 (irq = 20) is a 16550A console [ttyS1] enabled 0000:04:05.0: ttyS2 at I/O 0xe808 (irq = 20) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: module loaded Uniform Multi-Platform E-IDE driver atiixp 0000:00:14.1: IDE controller (0x1002:0x438c rev 0x00) pci 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 atiixp 0000:00:14.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xff00-0xff07 Probing IDE interface ide0... hda: SONY DVD-ROM DDU1615, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/66 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 ide-cd driver 5.00 ide-cd: hda: ATAPI 40X DVD-ROM drive, 1727kB Cache Uniform CD-ROM driver Revision: 3.20 ahci 0000:00:12.0: version 3.0 ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ff900 irq 22 ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 22 ata3: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ffa00 irq 22 ata4: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ffa80 irq 22 ahci 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part ahci 0000:02:00.0: setting latency timer to 64 scsi4 : ahci scsi5 : ahci ata5: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 17 ata6: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 17 sky2 driver version 1.25 sky2 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 sky2 0000:03:00.0: setting latency timer to 64 sky2 0000:03:00.0: Yukon-2 EC chip revision 2 sky2 0000:03:00.0: irq 27 for MSI/MSI-X sky2 eth0: addr 00:0c:87:00:40:20 console [netcon0] enabled netconsole: network logging started Fusion MPT base driver 3.04.12 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SAS Host driver 3.04.12 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe8ff000 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe8fe000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe8fd000 usb usb3: configuration #1 chosen from 1 choice ata3: SATA link down (SStatus 0 SControl 300) ata1: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe8fc000 ata6: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe8fb000 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe8fa000 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd: USB Universal Host Controller Interface driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice i2c /dev entries driver i2c-core: driver [dev_driver] registered ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver it87: Found IT8716F chip at 0xe80, revision 1 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 cpuidle: using governor ladder cpuidle: using governor menu Advanced Linux Sound Architecture Driver Version 1.0.21. HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 hda_codec: ALC889A: BIOS auto-probing. ALSA device list: #0: HDA ATI SB at 0xfe8f4000 irq 16 TCP cubic registered NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 powernow-k8: Found 1 AMD Phenom(tm) 9650 Quad-Core Processor processors (4 cpu cores) (version 2.20.00) powernow-k8: 0 : pstate 0 (2300 MHz) powernow-k8: 1 : pstate 1 (1150 MHz) ata2: softreset failed (device not ready) ata2: applying SB600 PMP SRST workaround and retrying ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-7: ST3120811AS, 3.AAE, max UDMA/133 ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32) ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA ST3120811AS 3.AA PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) sd 1:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 > sd 1:0:0:0: [sda] Attached SCSI disk kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. VFS: Mounted root (ext3 filesystem) readonly on device 8:2. Freeing unused kernel memory: 516k freed udev: starting version 141 EXT3 FS on sda2, internal journal Adding 1959920k swap on /dev/sda3. Priority:-1 extents:1 across:1959920k sky2 eth0: enabling interface ADDRCONF(NETDEV_UP): eth0: link is not ready sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present microcode: original microcode versions... microcode: CPU0-3: patch_level=0x1000065 platform microcode: firmware: requesting amd-ucode/microcode_amd.bin microcode: size 1936, total_size 960 microcode: CPU0: patch mismatch (processor_rev_id: 1020, equiv_cpu_id: 1022) microcode: size 968, total_size 960 platform microcode: firmware: requesting amd-ucode/microcode_amd.bin microcode: size 1936, total_size 960 microcode: CPU1: patch mismatch (processor_rev_id: 1020, equiv_cpu_id: 1022) microcode: size 968, total_size 960 platform microcode: firmware: requesting amd-ucode/microcode_amd.bin microcode: size 1936, total_size 960 microcode: CPU2: patch mismatch (processor_rev_id: 1020, equiv_cpu_id: 1022) microcode: size 968, total_size 960 platform microcode: firmware: requesting amd-ucode/microcode_amd.bin microcode: size 1936, total_size 960 microcode: CPU3: patch mismatch (processor_rev_id: 1020, equiv_cpu_id: 1022) microcode: size 968, total_size 960 microcode: microcode versions after update... microcode: CPU0-3: patch_level=0x1000083 Microcode Update Driver: v2.00 , Peter Oruba CPU 2 is now offline CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU2 attaching NULL sched-domain. CPU3 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1,3 level MC groups: 0 1 3 CPU1 attaching sched-domain: domain 0: span 0-1,3 level MC groups: 1 3 0 CPU3 attaching sched-domain: domain 0: span 0-1,3 level MC groups: 3 0 1 Booting processor 2 APIC 0x2 ip 0x6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 4599.83 BogoMIPS (lpj=2299918) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 2/0x2 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU2: AMD Phenom(tm) 9650 Quad-Core Processor stepping 03 checking TSC synchronization [CPU#0 -> CPU#2]: passed. CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU3 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-3 level MC groups: 0 1 2 3 CPU1 attaching sched-domain: domain 0: span 0-3 level MC groups: 1 2 3 0 CPU2 attaching sched-domain: domain 0: span 0-3 level MC groups: 2 3 0 1 CPU3 attaching sched-domain: domain 0: span 0-3 level MC groups: 3 0 1 2 platform microcode: firmware: requesting amd-ucode/microcode_amd.bin microcode: size 1936, total_size 960 microcode: CPU2: patch mismatch (processor_rev_id: 1020, equiv_cpu_id: 1022) microcode: size 968, total_size 960 PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 1:0:0:0: [sda] Synchronizing SCSI cache sd 1:0:0:0: [sda] Stopping disk ACPI handle has no context! serial 00:06: disabled sky2 eth0: disabling interface ACPI handle has no context! ACPI handle has no context! ahci 0000:02:00.0: PCI INT A disabled HDA Intel 0000:00:14.2: PCI INT A disabled ATIIXP_IDE 0000:00:14.1: PCI INT A disabled ehci_hcd 0000:00:13.5: PCI INT D disabled ohci_hcd 0000:00:13.4: PCI INT C disabled ohci_hcd 0000:00:13.3: PCI INT B disabled ohci_hcd 0000:00:13.2: PCI INT C disabled ohci_hcd 0000:00:13.1: PCI INT B disabled ohci_hcd 0000:00:13.0: PCI INT A disabled ahci 0000:00:12.0: PCI INT A disabled ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... CPU 1 is now offline CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU2 attaching NULL sched-domain. CPU3 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0,2-3 level MC groups: 0 2 3 CPU2 attaching sched-domain: domain 0: span 0,2-3 level MC groups: 2 3 0 CPU3 attaching sched-domain: domain 0: span 0,2-3 level MC groups: 3 0 2 CPU1 is down CPU 2 is now offline CPU0 attaching NULL sched-domain. CPU2 attaching NULL sched-domain. CPU3 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0,3 level MC groups: 0 3 CPU3 attaching sched-domain: domain 0: span 0,3 level MC groups: 3 0 CPU2 is down CPU 3 is now offline SMP alternatives: switching to UP code CPU0 attaching NULL sched-domain. CPU3 attaching NULL sched-domain. CPU0 attaching NULL sched-domain. CPU3 is down Extended CMOS year: 2000 Back to C! microcode: CPU0: updated (new patch_level=0x1000083) PCI-DMA: Resuming GART IOMMU PCI-DMA: Restoring GART aperture settings Extended CMOS year: 2000 Enabling non-boot CPUs ... SMP alternatives: switching to SMP code Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4599.84 BogoMIPS (lpj=2299922) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: AMD Phenom(tm) 9650 Quad-Core Processor stepping 03 checking TSC synchronization [CPU#0 -> CPU#1]: passed. CPU0 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 microcode: CPU1: updated (new patch_level=0x1000083) CPU1 is up Booting processor 2 APIC 0x2 ip 0x6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 4599.85 BogoMIPS (lpj=2299927) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 2/0x2 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU2: AMD Phenom(tm) 9650 Quad-Core Processor stepping 03 checking TSC synchronization [CPU#1 -> CPU#2]: passed. CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-2 level MC groups: 0 1 2 CPU1 attaching sched-domain: domain 0: span 0-2 level MC groups: 1 2 0 CPU2 attaching sched-domain: domain 0: span 0-2 level MC groups: 2 0 1 CPU2 is up Booting processor 3 APIC 0x3 ip 0x6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 4599.96 BogoMIPS (lpj=2299984) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 3/0x3 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU3: AMD Phenom(tm) 9650 Quad-Core Processor stepping 03 checking TSC synchronization [CPU#2 -> CPU#3]: passed. CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU2 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-3 level MC groups: 0 1 2 3 CPU1 attaching sched-domain: domain 0: span 0-3 level MC groups: 1 2 3 0 CPU2 attaching sched-domain: domain 0: span 0-3 level MC groups: 2 3 0 1 CPU3 attaching sched-domain: domain 0: span 0-3 level MC groups: 3 0 1 2 microcode: CPU3: updated (new patch_level=0x1000083) CPU3 is up ACPI: Waking up from system sleep state S3 pcieport 0000:00:02.0: restoring config space at offset 0x7 (was 0x2000a1a1, writing 0xa1a1) pcieport 0000:00:02.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) pcieport 0000:00:09.0: restoring config space at offset 0x7 (was 0x2000c1b1, writing 0xc1b1) pcieport 0000:00:09.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) pcieport 0000:00:0a.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) ahci 0000:00:12.0: restoring config space at offset 0xf (was 0x100, writing 0x105) ahci 0000:00:12.0: restoring config space at offset 0x2 (was 0x1018f00, writing 0x1060100) ahci 0000:00:12.0: set SATA to AHCI mode ehci_hcd 0000:00:13.5: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00113) HDA Intel 0000:00:14.2: restoring config space at offset 0xf (was 0x103, writing 0x3) HDA Intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002) pci 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a) pci 0000:01:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfe9c0000) pci 0000:01:00.0: restoring config space at offset 0x6 (was 0x0, writing 0xfe9f0000) pci 0000:01:00.0: restoring config space at offset 0x5 (was 0x1, writing 0xa001) pci 0000:01:00.0: restoring config space at offset 0x4 (was 0x8, writing 0xd0000008) pci 0000:01:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010) pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) pci 0000:01:00.1: restoring config space at offset 0x4 (was 0x0, writing 0xfe9e0000) pci 0000:01:00.1: restoring config space at offset 0x3 (was 0x0, writing 0x10) pci 0000:01:00.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) ahci 0000:02:00.0: restoring config space at offset 0x8 (was 0xb401, writing 0x0) ahci 0000:02:00.0: restoring config space at offset 0x7 (was 0xb801, writing 0x0) ahci 0000:02:00.0: restoring config space at offset 0x6 (was 0xc001, writing 0x0) ahci 0000:02:00.0: restoring config space at offset 0x5 (was 0xc401, writing 0x0) ahci 0000:02:00.0: restoring config space at offset 0x4 (was 0xc801, writing 0x0) ahci 0000:02:00.0: restoring config space at offset 0x3 (was 0x10, writing 0x800010) ahci 0000:02:00.0: restoring config space at offset 0x2 (was 0x1018502, writing 0x1060102) pci 0000:02:00.1: restoring config space at offset 0x8 (was 0x1, writing 0xb401) pci 0000:02:00.1: restoring config space at offset 0x7 (was 0x1, writing 0xb801) pci 0000:02:00.1: restoring config space at offset 0x6 (was 0x1, writing 0xc001) pci 0000:02:00.1: restoring config space at offset 0x5 (was 0x1, writing 0xc401) pci 0000:02:00.1: restoring config space at offset 0x4 (was 0x1, writing 0xc801) sky2 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) sky2 0000:03:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfebc0000) sky2 0000:03:00.0: restoring config space at offset 0x6 (was 0x1, writing 0xd801) sky2 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfebfc004) sky2 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) sky2 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) serial 0000:04:05.0: restoring config space at offset 0xf (was 0x1ff, writing 0x107) serial 0000:04:05.0: restoring config space at offset 0x4 (was 0x1, writing 0xe801) serial 0000:04:05.0: restoring config space at offset 0x1 (was 0x2800080, writing 0x2800181) ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ATIIXP_IDE 0000:00:14.1: setting latency timer to 64 HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ahci 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ahci 0000:02:00.0: setting latency timer to 64 sky2 eth0: enabling interface serial 00:06: activated ata3: SATA link down (SStatus 0 SControl 300) ata1: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata2: softreset failed (device not ready) ata2: applying SB600 PMP SRST workaround and retrying ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: configured for UDMA/133 sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx floppy driver state ------------------- now=4294746204 last interrupt=4294667714 diff=78490 last called handler=ffffffff811eb342 timeout_message=lock fdc last output bytes: 8 80 4294667699 8 80 4294667699 8 80 4294667699 8 80 4294667711 8 80 4294667711 8 80 4294667711 8 80 4294667711 e 80 4294667712 13 80 4294667712 0 90 4294667712 1a 90 4294667712 0 90 4294667712 12 90 4294667712 0 90 4294667712 14 90 4294667712 18 80 4294667712 8 80 4294667714 8 80 4294667714 8 80 4294667714 8 80 4294667714 last result at 4294667714 last redo_fd_request at 4294667714 status=0 fdc_busy=1 do_floppy=ffffffff811eb342 cont=ffffffff815deb80 current_req=(null) command_status=-1 floppy0: floppy timeout called hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/66 mode selected sd 1:0:0:0: [sda] Starting disk Restarting tasks ... done.