| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20091108010115.183ecfae@mycelium.queued.net>
Date: Sun, 8 Nov 2009 01:01:15 -0500
From: Andres Salomon <dilinger@...labora.co.uk>
To: akpm@...ux-foundation.org
Cc: linux-kernel@...r.kernel.org, linux-geode@...ts.infradead.org,
cjb@...top.org, deepak@...top.org,
Jordan Crouse <jordan@...micpenguin.net>
Subject: [PATCH 6/6] CS5535: Drop the Geode-specific MFGPT/GPIO code
With generic modular drivers handling all of this stuff, the geode-specific
code can go away. The cs5535-gpio, cs5535-mfgpt, and cs5535-clockevt drivers
now handle this.
Signed-off-by: Andres Salomon <dilinger@...labora.co.uk>
---
arch/x86/Kconfig | 10 -
arch/x86/include/asm/geode.h | 117 ------------
arch/x86/kernel/Makefile | 1 -
arch/x86/kernel/geode_32.c | 174 ------------------
arch/x86/kernel/mfgpt_32.c | 410 ------------------------------------------
drivers/gpio/Kconfig | 2 +-
drivers/misc/Kconfig | 2 +-
7 files changed, 2 insertions(+), 714 deletions(-)
delete mode 100644 arch/x86/kernel/geode_32.c
delete mode 100644 arch/x86/kernel/mfgpt_32.c
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 37a4d80..629699e 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2011,16 +2011,6 @@ config SCx200HR_TIMER
processor goes idle (as is done by the scheduler). The
other workaround is idle=poll boot option.
-config GEODE_MFGPT_TIMER
- def_bool y
- prompt "Geode Multi-Function General Purpose Timer (MFGPT) events"
- depends on MGEODE_LX && GENERIC_TIME && GENERIC_CLOCKEVENTS
- ---help---
- This driver provides a clock event source based on the MFGPT
- timer(s) in the CS5535 and CS5536 companion chip for the geode.
- MFGPTs have a better resolution and max interval than the
- generic PIT, and are suitable for use as high-res timers.
-
config OLPC
bool "One Laptop Per Child support"
select GPIOLIB
diff --git a/arch/x86/include/asm/geode.h b/arch/x86/include/asm/geode.h
index ae104da..7cd7355 100644
--- a/arch/x86/include/asm/geode.h
+++ b/arch/x86/include/asm/geode.h
@@ -14,98 +14,6 @@
#include <linux/io.h>
#include <linux/cs5535.h>
-/* Generic southbridge functions */
-
-#define GEODE_DEV_PMS 0
-#define GEODE_DEV_ACPI 1
-#define GEODE_DEV_GPIO 2
-#define GEODE_DEV_MFGPT 3
-
-extern int geode_get_dev_base(unsigned int dev);
-
-/* Useful macros */
-#define geode_pms_base() geode_get_dev_base(GEODE_DEV_PMS)
-#define geode_acpi_base() geode_get_dev_base(GEODE_DEV_ACPI)
-#define geode_gpio_base() geode_get_dev_base(GEODE_DEV_GPIO)
-#define geode_mfgpt_base() geode_get_dev_base(GEODE_DEV_MFGPT)
-
-/* MSRS */
-
-#define MSR_LBAR_SMB 0x5140000B
-#define MSR_LBAR_GPIO 0x5140000C
-#define MSR_LBAR_MFGPT 0x5140000D
-#define MSR_LBAR_ACPI 0x5140000E
-#define MSR_LBAR_PMS 0x5140000F
-
-/* Resource Sizes */
-
-#define LBAR_GPIO_SIZE 0xFF
-#define LBAR_MFGPT_SIZE 0x40
-#define LBAR_ACPI_SIZE 0x40
-#define LBAR_PMS_SIZE 0x80
-
-/* ACPI registers (PMS block) */
-
-/*
- * PM1_EN is only valid when VSA is enabled for 16 bit reads.
- * When VSA is not enabled, *always* read both PM1_STS and PM1_EN
- * with a 32 bit read at offset 0x0
- */
-
-#define PM1_STS 0x00
-#define PM1_EN 0x02
-#define PM1_CNT 0x08
-#define PM2_CNT 0x0C
-#define PM_TMR 0x10
-#define PM_GPE0_STS 0x18
-#define PM_GPE0_EN 0x1C
-
-/* PMC registers (PMS block) */
-
-#define PM_SSD 0x00
-#define PM_SCXA 0x04
-#define PM_SCYA 0x08
-#define PM_OUT_SLPCTL 0x0C
-#define PM_SCLK 0x10
-#define PM_SED 0x1
-#define PM_SCXD 0x18
-#define PM_SCYD 0x1C
-#define PM_IN_SLPCTL 0x20
-#define PM_WKD 0x30
-#define PM_WKXD 0x34
-#define PM_RD 0x38
-#define PM_WKXA 0x3C
-#define PM_FSD 0x40
-#define PM_TSD 0x44
-#define PM_PSD 0x48
-#define PM_NWKD 0x4C
-#define PM_AWKD 0x50
-#define PM_SSC 0x54
-
-static inline u32 geode_gpio(unsigned int nr)
-{
- BUG_ON(nr > 28);
- return 1 << nr;
-}
-
-extern void geode_gpio_set(u32, unsigned int);
-extern void geode_gpio_clear(u32, unsigned int);
-extern int geode_gpio_isset(u32, unsigned int);
-extern void geode_gpio_setup_event(unsigned int, int, int);
-extern void geode_gpio_set_irq(unsigned int, unsigned int);
-
-static inline void geode_gpio_event_irq(unsigned int gpio, int pair)
-{
- geode_gpio_setup_event(gpio, pair, 0);
-}
-
-static inline void geode_gpio_event_pme(unsigned int gpio, int pair)
-{
- geode_gpio_setup_event(gpio, pair, 1);
-}
-
-/* Specific geode tests */
-
static inline int is_geode_gx(void)
{
return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
@@ -125,29 +33,4 @@ static inline int is_geode(void)
return (is_geode_gx() || is_geode_lx());
}
-static inline void geode_mfgpt_write(int timer, u16 reg, u16 value)
-{
- u32 base = geode_get_dev_base(GEODE_DEV_MFGPT);
- outw(value, base + reg + (timer * 8));
-}
-
-static inline u16 geode_mfgpt_read(int timer, u16 reg)
-{
- u32 base = geode_get_dev_base(GEODE_DEV_MFGPT);
- return inw(base + reg + (timer * 8));
-}
-
-extern int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable);
-extern int geode_mfgpt_set_irq(int timer, int cmp, int *irq, int enable);
-extern int geode_mfgpt_alloc_timer(int timer, int domain);
-
-#define geode_mfgpt_setup_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 1)
-#define geode_mfgpt_release_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 0)
-
-#ifdef CONFIG_GEODE_MFGPT_TIMER
-extern int __init mfgpt_timer_setup(void);
-#else
-static inline int mfgpt_timer_setup(void) { return 0; }
-#endif
-
#endif /* _ASM_X86_GEODE_H */
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index d8e5d0c..b0dc053 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -89,7 +89,6 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_HPET_TIMER) += hpet.o
obj-$(CONFIG_K8_NB) += k8.o
-obj-$(CONFIG_MGEODE_LX) += geode_32.o mfgpt_32.o
obj-$(CONFIG_DEBUG_RODATA_TEST) += test_rodata.o
obj-$(CONFIG_DEBUG_NX_TEST) += test_nx.o
diff --git a/arch/x86/kernel/geode_32.c b/arch/x86/kernel/geode_32.c
deleted file mode 100644
index 9dad6ca..0000000
--- a/arch/x86/kernel/geode_32.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * AMD Geode southbridge support code
- * Copyright (C) 2006, Advanced Micro Devices, Inc.
- * Copyright (C) 2007, Andres Salomon <dilinger@...ian.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of version 2 of the GNU General Public License
- * as published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <asm/msr.h>
-#include <asm/geode.h>
-
-static struct {
- char *name;
- u32 msr;
- int size;
- u32 base;
-} lbars[] = {
- { "geode-pms", MSR_LBAR_PMS, LBAR_PMS_SIZE, 0 },
- { "geode-acpi", MSR_LBAR_ACPI, LBAR_ACPI_SIZE, 0 },
- { "geode-gpio", MSR_LBAR_GPIO, LBAR_GPIO_SIZE, 0 },
- { "geode-mfgpt", MSR_LBAR_MFGPT, LBAR_MFGPT_SIZE, 0 }
-};
-
-static void __init init_lbars(void)
-{
- u32 lo, hi;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(lbars); i++) {
- rdmsr(lbars[i].msr, lo, hi);
- if (hi & 0x01)
- lbars[i].base = lo & 0x0000ffff;
-
- if (lbars[i].base == 0)
- printk(KERN_ERR "geode: Couldn't initialize '%s'\n",
- lbars[i].name);
- }
-}
-
-int geode_get_dev_base(unsigned int dev)
-{
- BUG_ON(dev >= ARRAY_SIZE(lbars));
- return lbars[dev].base;
-}
-EXPORT_SYMBOL_GPL(geode_get_dev_base);
-
-/* === GPIO API === */
-
-void geode_gpio_set(u32 gpio, unsigned int reg)
-{
- u32 base = geode_get_dev_base(GEODE_DEV_GPIO);
-
- if (!base)
- return;
-
- /* low bank register */
- if (gpio & 0xFFFF)
- outl(gpio & 0xFFFF, base + reg);
- /* high bank register */
- gpio >>= 16;
- if (gpio)
- outl(gpio, base + 0x80 + reg);
-}
-EXPORT_SYMBOL_GPL(geode_gpio_set);
-
-void geode_gpio_clear(u32 gpio, unsigned int reg)
-{
- u32 base = geode_get_dev_base(GEODE_DEV_GPIO);
-
- if (!base)
- return;
-
- /* low bank register */
- if (gpio & 0xFFFF)
- outl((gpio & 0xFFFF) << 16, base + reg);
- /* high bank register */
- gpio &= (0xFFFF << 16);
- if (gpio)
- outl(gpio, base + 0x80 + reg);
-}
-EXPORT_SYMBOL_GPL(geode_gpio_clear);
-
-int geode_gpio_isset(u32 gpio, unsigned int reg)
-{
- u32 base = geode_get_dev_base(GEODE_DEV_GPIO);
- u32 val;
-
- if (!base)
- return 0;
-
- /* low bank register */
- if (gpio & 0xFFFF) {
- val = inl(base + reg) & (gpio & 0xFFFF);
- if ((gpio & 0xFFFF) == val)
- return 1;
- }
- /* high bank register */
- gpio >>= 16;
- if (gpio) {
- val = inl(base + 0x80 + reg) & gpio;
- if (gpio == val)
- return 1;
- }
- return 0;
-}
-EXPORT_SYMBOL_GPL(geode_gpio_isset);
-
-void geode_gpio_set_irq(unsigned int group, unsigned int irq)
-{
- u32 lo, hi;
-
- if (group > 7 || irq > 15)
- return;
-
- rdmsr(MSR_PIC_ZSEL_HIGH, lo, hi);
-
- lo &= ~(0xF << (group * 4));
- lo |= (irq & 0xF) << (group * 4);
-
- wrmsr(MSR_PIC_ZSEL_HIGH, lo, hi);
-}
-EXPORT_SYMBOL_GPL(geode_gpio_set_irq);
-
-void geode_gpio_setup_event(unsigned int gpio, int pair, int pme)
-{
- u32 base = geode_get_dev_base(GEODE_DEV_GPIO);
- u32 offset, shift, val;
-
- if (gpio >= 24)
- offset = GPIO_MAP_W;
- else if (gpio >= 16)
- offset = GPIO_MAP_Z;
- else if (gpio >= 8)
- offset = GPIO_MAP_Y;
- else
- offset = GPIO_MAP_X;
-
- shift = (gpio % 8) * 4;
-
- val = inl(base + offset);
-
- /* Clear whatever was there before */
- val &= ~(0xF << shift);
-
- /* And set the new value */
-
- val |= ((pair & 7) << shift);
-
- /* Set the PME bit if this is a PME event */
-
- if (pme)
- val |= (1 << (shift + 3));
-
- outl(val, base + offset);
-}
-EXPORT_SYMBOL_GPL(geode_gpio_setup_event);
-
-static int __init geode_southbridge_init(void)
-{
- if (!is_geode())
- return -ENODEV;
-
- init_lbars();
- (void) mfgpt_timer_setup();
- return 0;
-}
-
-postcore_initcall(geode_southbridge_init);
diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c
deleted file mode 100644
index 2a62d84..0000000
--- a/arch/x86/kernel/mfgpt_32.c
+++ /dev/null
@@ -1,410 +0,0 @@
-/*
- * Driver/API for AMD Geode Multi-Function General Purpose Timers (MFGPT)
- *
- * Copyright (C) 2006, Advanced Micro Devices, Inc.
- * Copyright (C) 2007, Andres Salomon <dilinger@...ian.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of version 2 of the GNU General Public License
- * as published by the Free Software Foundation.
- *
- * The MFGPTs are documented in AMD Geode CS5536 Companion Device Data Book.
- */
-
-/*
- * We are using the 32.768kHz input clock - it's the only one that has the
- * ranges we find desirable. The following table lists the suitable
- * divisors and the associated Hz, minimum interval and the maximum interval:
- *
- * Divisor Hz Min Delta (s) Max Delta (s)
- * 1 32768 .00048828125 2.000
- * 2 16384 .0009765625 4.000
- * 4 8192 .001953125 8.000
- * 8 4096 .00390625 16.000
- * 16 2048 .0078125 32.000
- * 32 1024 .015625 64.000
- * 64 512 .03125 128.000
- * 128 256 .0625 256.000
- * 256 128 .125 512.000
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <asm/geode.h>
-
-#define MFGPT_DEFAULT_IRQ 7
-
-static struct mfgpt_timer_t {
- unsigned int avail:1;
-} mfgpt_timers[MFGPT_MAX_TIMERS];
-
-/* Selected from the table above */
-
-#define MFGPT_DIVISOR 16
-#define MFGPT_SCALE 4 /* divisor = 2^(scale) */
-#define MFGPT_HZ (32768 / MFGPT_DIVISOR)
-#define MFGPT_PERIODIC (MFGPT_HZ / HZ)
-
-/* Allow for disabling of MFGPTs */
-static int disable;
-static int __init mfgpt_disable(char *s)
-{
- disable = 1;
- return 1;
-}
-__setup("nomfgpt", mfgpt_disable);
-
-/* Reset the MFGPT timers. This is required by some broken BIOSes which already
- * do the same and leave the system in an unstable state. TinyBIOS 0.98 is
- * affected at least (0.99 is OK with MFGPT workaround left to off).
- */
-static int __init mfgpt_fix(char *s)
-{
- u32 val, dummy;
-
- /* The following udocumented bit resets the MFGPT timers */
- val = 0xFF; dummy = 0;
- wrmsr(MSR_MFGPT_SETUP, val, dummy);
- return 1;
-}
-__setup("mfgptfix", mfgpt_fix);
-
-/*
- * Check whether any MFGPTs are available for the kernel to use. In most
- * cases, firmware that uses AMD's VSA code will claim all timers during
- * bootup; we certainly don't want to take them if they're already in use.
- * In other cases (such as with VSAless OpenFirmware), the system firmware
- * leaves timers available for us to use.
- */
-
-
-static int timers = -1;
-
-static void geode_mfgpt_detect(void)
-{
- int i;
- u16 val;
-
- timers = 0;
-
- if (disable) {
- printk(KERN_INFO "geode-mfgpt: MFGPT support is disabled\n");
- goto done;
- }
-
- if (!geode_get_dev_base(GEODE_DEV_MFGPT)) {
- printk(KERN_INFO "geode-mfgpt: MFGPT LBAR is not set up\n");
- goto done;
- }
-
- for (i = 0; i < MFGPT_MAX_TIMERS; i++) {
- val = geode_mfgpt_read(i, MFGPT_REG_SETUP);
- if (!(val & MFGPT_SETUP_SETUP)) {
- mfgpt_timers[i].avail = 1;
- timers++;
- }
- }
-
-done:
- printk(KERN_INFO "geode-mfgpt: %d MFGPT timers available.\n", timers);
-}
-
-int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable)
-{
- u32 msr, mask, value, dummy;
- int shift = (cmp == MFGPT_CMP1) ? 0 : 8;
-
- if (timer < 0 || timer >= MFGPT_MAX_TIMERS)
- return -EIO;
-
- /*
- * The register maps for these are described in sections 6.17.1.x of
- * the AMD Geode CS5536 Companion Device Data Book.
- */
- switch (event) {
- case MFGPT_EVENT_RESET:
- /*
- * XXX: According to the docs, we cannot reset timers above
- * 6; that is, resets for 7 and 8 will be ignored. Is this
- * a problem? -dilinger
- */
- msr = MSR_MFGPT_NR;
- mask = 1 << (timer + 24);
- break;
-
- case MFGPT_EVENT_NMI:
- msr = MSR_MFGPT_NR;
- mask = 1 << (timer + shift);
- break;
-
- case MFGPT_EVENT_IRQ:
- msr = MSR_MFGPT_IRQ;
- mask = 1 << (timer + shift);
- break;
-
- default:
- return -EIO;
- }
-
- rdmsr(msr, value, dummy);
-
- if (enable)
- value |= mask;
- else
- value &= ~mask;
-
- wrmsr(msr, value, dummy);
- return 0;
-}
-EXPORT_SYMBOL_GPL(geode_mfgpt_toggle_event);
-
-int geode_mfgpt_set_irq(int timer, int cmp, int *irq, int enable)
-{
- u32 zsel, lpc, dummy;
- int shift;
-
- if (timer < 0 || timer >= MFGPT_MAX_TIMERS)
- return -EIO;
-
- /*
- * Unfortunately, MFGPTs come in pairs sharing their IRQ lines. If VSA
- * is using the same CMP of the timer's Siamese twin, the IRQ is set to
- * 2, and we mustn't use nor change it.
- * XXX: Likewise, 2 Linux drivers might clash if the 2nd overwrites the
- * IRQ of the 1st. This can only happen if forcing an IRQ, calling this
- * with *irq==0 is safe. Currently there _are_ no 2 drivers.
- */
- rdmsr(MSR_PIC_ZSEL_LOW, zsel, dummy);
- shift = ((cmp == MFGPT_CMP1 ? 0 : 4) + timer % 4) * 4;
- if (((zsel >> shift) & 0xF) == 2)
- return -EIO;
-
- /* Choose IRQ: if none supplied, keep IRQ already set or use default */
- if (!*irq)
- *irq = (zsel >> shift) & 0xF;
- if (!*irq)
- *irq = MFGPT_DEFAULT_IRQ;
-
- /* Can't use IRQ if it's 0 (=disabled), 2, or routed to LPC */
- if (*irq < 1 || *irq == 2 || *irq > 15)
- return -EIO;
- rdmsr(MSR_PIC_IRQM_LPC, lpc, dummy);
- if (lpc & (1 << *irq))
- return -EIO;
-
- /* All chosen and checked - go for it */
- if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable))
- return -EIO;
- if (enable) {
- zsel = (zsel & ~(0xF << shift)) | (*irq << shift);
- wrmsr(MSR_PIC_ZSEL_LOW, zsel, dummy);
- }
-
- return 0;
-}
-
-static int mfgpt_get(int timer)
-{
- mfgpt_timers[timer].avail = 0;
- printk(KERN_INFO "geode-mfgpt: Registered timer %d\n", timer);
- return timer;
-}
-
-int geode_mfgpt_alloc_timer(int timer, int domain)
-{
- int i;
-
- if (timers == -1) {
- /* timers haven't been detected yet */
- geode_mfgpt_detect();
- }
-
- if (!timers)
- return -1;
-
- if (timer >= MFGPT_MAX_TIMERS)
- return -1;
-
- if (timer < 0) {
- /* Try to find an available timer */
- for (i = 0; i < MFGPT_MAX_TIMERS; i++) {
- if (mfgpt_timers[i].avail)
- return mfgpt_get(i);
-
- if (i == 5 && domain == MFGPT_DOMAIN_WORKING)
- break;
- }
- } else {
- /* If they requested a specific timer, try to honor that */
- if (mfgpt_timers[timer].avail)
- return mfgpt_get(timer);
- }
-
- /* No timers available - too bad */
- return -1;
-}
-EXPORT_SYMBOL_GPL(geode_mfgpt_alloc_timer);
-
-
-#ifdef CONFIG_GEODE_MFGPT_TIMER
-
-/*
- * The MFPGT timers on the CS5536 provide us with suitable timers to use
- * as clock event sources - not as good as a HPET or APIC, but certainly
- * better than the PIT. This isn't a general purpose MFGPT driver, but
- * a simplified one designed specifically to act as a clock event source.
- * For full details about the MFGPT, please consult the CS5536 data sheet.
- */
-
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-
-static unsigned int mfgpt_tick_mode = CLOCK_EVT_MODE_SHUTDOWN;
-static u16 mfgpt_event_clock;
-
-static int irq;
-static int __init mfgpt_setup(char *str)
-{
- get_option(&str, &irq);
- return 1;
-}
-__setup("mfgpt_irq=", mfgpt_setup);
-
-static void mfgpt_disable_timer(u16 clock)
-{
- /* avoid races by clearing CMP1 and CMP2 unconditionally */
- geode_mfgpt_write(clock, MFGPT_REG_SETUP, (u16) ~MFGPT_SETUP_CNTEN |
- MFGPT_SETUP_CMP1 | MFGPT_SETUP_CMP2);
-}
-
-static int mfgpt_next_event(unsigned long, struct clock_event_device *);
-static void mfgpt_set_mode(enum clock_event_mode, struct clock_event_device *);
-
-static struct clock_event_device mfgpt_clockevent = {
- .name = "mfgpt-timer",
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .set_mode = mfgpt_set_mode,
- .set_next_event = mfgpt_next_event,
- .rating = 250,
- .cpumask = cpu_all_mask,
- .shift = 32
-};
-
-static void mfgpt_start_timer(u16 delta)
-{
- geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_CMP2, (u16) delta);
- geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0);
-
- geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP,
- MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
-}
-
-static void mfgpt_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- mfgpt_disable_timer(mfgpt_event_clock);
-
- if (mode == CLOCK_EVT_MODE_PERIODIC)
- mfgpt_start_timer(MFGPT_PERIODIC);
-
- mfgpt_tick_mode = mode;
-}
-
-static int mfgpt_next_event(unsigned long delta, struct clock_event_device *evt)
-{
- mfgpt_start_timer(delta);
- return 0;
-}
-
-static irqreturn_t mfgpt_tick(int irq, void *dev_id)
-{
- u16 val = geode_mfgpt_read(mfgpt_event_clock, MFGPT_REG_SETUP);
-
- /* See if the interrupt was for us */
- if (!(val & (MFGPT_SETUP_SETUP | MFGPT_SETUP_CMP2 | MFGPT_SETUP_CMP1)))
- return IRQ_NONE;
-
- /* Turn off the clock (and clear the event) */
- mfgpt_disable_timer(mfgpt_event_clock);
-
- if (mfgpt_tick_mode == CLOCK_EVT_MODE_SHUTDOWN)
- return IRQ_HANDLED;
-
- /* Clear the counter */
- geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0);
-
- /* Restart the clock in periodic mode */
-
- if (mfgpt_tick_mode == CLOCK_EVT_MODE_PERIODIC) {
- geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP,
- MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
- }
-
- mfgpt_clockevent.event_handler(&mfgpt_clockevent);
- return IRQ_HANDLED;
-}
-
-static struct irqaction mfgptirq = {
- .handler = mfgpt_tick,
- .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER,
- .name = "mfgpt-timer"
-};
-
-int __init mfgpt_timer_setup(void)
-{
- int timer, ret;
- u16 val;
-
- timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING);
- if (timer < 0) {
- printk(KERN_ERR
- "mfgpt-timer: Could not allocate a MFPGT timer\n");
- return -ENODEV;
- }
-
- mfgpt_event_clock = timer;
-
- /* Set up the IRQ on the MFGPT side */
- if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, &irq)) {
- printk(KERN_ERR "mfgpt-timer: Could not set up IRQ %d\n", irq);
- return -EIO;
- }
-
- /* And register it with the kernel */
- ret = setup_irq(irq, &mfgptirq);
-
- if (ret) {
- printk(KERN_ERR
- "mfgpt-timer: Unable to set up the interrupt.\n");
- goto err;
- }
-
- /* Set the clock scale and enable the event mode for CMP2 */
- val = MFGPT_SCALE | (3 << 8);
-
- geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP, val);
-
- /* Set up the clock event */
- mfgpt_clockevent.mult = div_sc(MFGPT_HZ, NSEC_PER_SEC,
- mfgpt_clockevent.shift);
- mfgpt_clockevent.min_delta_ns = clockevent_delta2ns(0xF,
- &mfgpt_clockevent);
- mfgpt_clockevent.max_delta_ns = clockevent_delta2ns(0xFFFE,
- &mfgpt_clockevent);
-
- printk(KERN_INFO
- "mfgpt-timer: Registering MFGPT timer %d as a clock event, using IRQ %d\n",
- timer, irq);
- clockevents_register_device(&mfgpt_clockevent);
-
- return 0;
-
-err:
- geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, &irq);
- printk(KERN_ERR
- "mfgpt-timer: Unable to set up the MFGPT clock source\n");
- return -EIO;
-}
-
-#endif
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index df4b82d..57ca339 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -176,7 +176,7 @@ comment "PCI GPIO expanders:"
config GPIO_CS5535
tristate "AMD CS5535/CS5536 GPIO support"
- depends on PCI && !CS5535_GPIO && !MGEODE_LX
+ depends on PCI && !CS5535_GPIO
help
The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that
can be used for quite a number of things. The CS5535/6 is found on
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index e8cc9b2..9740cd8 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -175,7 +175,7 @@ config SGI_XP
config CS5535_MFGPT
tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support"
- depends on PCI && !MGEODE_LX
+ depends on PCI
default n
help
This driver provides access to MFGPT functionality for other
--
1.5.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists