[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4B00242D.1050704@tremplin-utc.net>
Date: Sun, 15 Nov 2009 16:54:21 +0100
From: Éric Piel <eric.piel@...mplin-utc.net>
To: Samu Onkalo <samu.p.onkalo@...ia.com>
Cc: daniel@...aq.de, pavel@....cz, linux-kernel@...r.kernel.org,
lm-sensors@...sensors.org
Subject: Re: [PATCH v2 07/10] LIS3LV02D: Remove calibaration functionality
Op 10-11-09 13:41, Samu Onkalo schreef:
> Chip is calibrated by the manufacturer. There is no need to calibarate
> it at driver level. If the chip is used as a joystick, calibaration can
> be done using joystick device calibration mechanism.
>
> Signed-off-by: Samu Onkalo <samu.p.onkalo@...ia.com>
Acked-by: Éric Piel <eric.piel@...mplin-utc.net>
> ---
> drivers/hwmon/lis3lv02d.c | 32 +++-----------------------------
> drivers/hwmon/lis3lv02d.h | 3 ---
> 2 files changed, 3 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c
> index 0335b36..5b39257 100644
> --- a/drivers/hwmon/lis3lv02d.c
> +++ b/drivers/hwmon/lis3lv02d.c
> @@ -344,19 +344,12 @@ static void lis3lv02d_joystick_poll(struct input_polled_dev *pidev)
> int x, y, z;
>
> lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z);
> - input_report_abs(pidev->input, ABS_X, x - lis3_dev.xcalib);
> - input_report_abs(pidev->input, ABS_Y, y - lis3_dev.ycalib);
> - input_report_abs(pidev->input, ABS_Z, z - lis3_dev.zcalib);
> + input_report_abs(pidev->input, ABS_X, x);
> + input_report_abs(pidev->input, ABS_Y, y);
> + input_report_abs(pidev->input, ABS_Z, z);
> input_sync(pidev->input);
> }
>
> -
> -static inline void lis3lv02d_calibrate_joystick(void)
> -{
> - lis3lv02d_get_xyz(&lis3_dev,
> - &lis3_dev.xcalib, &lis3_dev.ycalib, &lis3_dev.zcalib);
> -}
> -
> int lis3lv02d_joystick_enable(void)
> {
> struct input_dev *input_dev;
> @@ -373,8 +366,6 @@ int lis3lv02d_joystick_enable(void)
> lis3_dev.idev->poll_interval = MDPS_POLL_INTERVAL;
> input_dev = lis3_dev.idev->input;
>
> - lis3lv02d_calibrate_joystick();
> -
> input_dev->name = "ST LIS3LV02DL Accelerometer";
> input_dev->phys = DRIVER_NAME "/input0";
> input_dev->id.bustype = BUS_HOST;
> @@ -430,20 +421,6 @@ static ssize_t lis3lv02d_position_show(struct device *dev,
> return sprintf(buf, "(%d,%d,%d)\n", x, y, z);
> }
>
> -static ssize_t lis3lv02d_calibrate_show(struct device *dev,
> - struct device_attribute *attr, char *buf)
> -{
> - return sprintf(buf, "(%d,%d,%d)\n", lis3_dev.xcalib, lis3_dev.ycalib, lis3_dev.zcalib);
> -}
> -
> -static ssize_t lis3lv02d_calibrate_store(struct device *dev,
> - struct device_attribute *attr,
> - const char *buf, size_t count)
> -{
> - lis3lv02d_calibrate_joystick();
> - return count;
> -}
> -
> static ssize_t lis3lv02d_rate_show(struct device *dev,
> struct device_attribute *attr, char *buf)
> {
> @@ -452,14 +429,11 @@ static ssize_t lis3lv02d_rate_show(struct device *dev,
>
> static DEVICE_ATTR(selftest, S_IRUGO, lis3lv02d_selftest_show, NULL);
> static DEVICE_ATTR(position, S_IRUGO, lis3lv02d_position_show, NULL);
> -static DEVICE_ATTR(calibrate, S_IRUGO|S_IWUSR, lis3lv02d_calibrate_show,
> - lis3lv02d_calibrate_store);
> static DEVICE_ATTR(rate, S_IRUGO, lis3lv02d_rate_show, NULL);
>
> static struct attribute *lis3lv02d_attributes[] = {
> &dev_attr_selftest.attr,
> &dev_attr_position.attr,
> - &dev_attr_calibrate.attr,
> &dev_attr_rate.attr,
> NULL
> };
> diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h
> index 655875e..a692116 100644
> --- a/drivers/hwmon/lis3lv02d.h
> +++ b/drivers/hwmon/lis3lv02d.h
> @@ -216,9 +216,6 @@ struct lis3lv02d {
> struct input_polled_dev *idev; /* input device */
> struct platform_device *pdev; /* platform device */
> atomic_t count; /* interrupt count after last read */
> - int xcalib; /* calibrated null value for x */
> - int ycalib; /* calibrated null value for y */
> - int zcalib; /* calibrated null value for z */
> struct axis_conversion ac; /* hw -> logical axis */
>
> u32 irq; /* IRQ number */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists